Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Bottom-up de novo design of functional proteins with complex structural features

Nature Chemical Biology volume 17, pages 492–500 (2021)Cite this article

Subjects

Abstract

De novo protein design has enabled the creation of new protein structures. However, the design of functional proteins has proved challenging, in part due to the difficulty of transplanting structurally complex functional sites to available protein structures. Here, we used a bottom-up approach to build de novo proteins tailored to accommodate structurally complex functional motifs. We applied the bottom-up strategy to successfully design five folds for four distinct binding motifs, including a bifunctionalized protein with two motifs. Crystal structures confirmed the atomic-level accuracy of the computational designs. These de novo proteins were functional as components of biosensors to monitor antibody responses and as orthogonal ligands to modulate synthetic signaling receptors in engineered mammalian cells. Our work demonstrates the potential of bottom-up approaches to accommodate complex structural motifs, which will be essential to endow de novo proteins with elaborate biochemical functions, such as molecular recognition or catalysis.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Bottom-up design of functional de novo proteins.
Fig. 2: Bottom-up design of six protein folds for the presentation of four different binding motifs.
Fig. 3: Biophysical characterization of lead variants from each topology.
Fig. 4: Crystal structures are in close agreement with the design models.
Fig. 5: Antibody biosensors based on de novo-designed proteins for the detection of epitope-specific responses.
Fig. 6: Bifunctional de novo design controls the activity of synthetic receptors in mammalian cells.

Similar content being viewed by others

Data availability

Crystal structures have been deposited in the PDB with accession codes 6YWD (4H.01 in complex with Mota Fab) and 6YWC (4E1H.95 in complex with 101F Fab). Amino acid and nucleotide sequences of experimentally characterized variants are available in Supplementary Table 5. Expression plasmids of 4E1H.95_LUMABS, 4E2H.210_LUMABS, 4H.01, 3E2H.37, 4E2H.210, 4E1H.95 and 3H1L_02.395 are available from Addgene under accession numbers 155208, 155209, 155210, 155211, 155212, 155213 and 155198, respectively. Plasmid information for the cellular receptors is available in Supplementary Table 6, and plasmids can be directly requested from the corresponding author.

Code availability

All scripts used for the computational design and for the analysis of next-generation sequencing data have been deposited and are available in the public GitHub repository at https://github.com/LPDI-EPFL/Bottom-up-de-novo-design.

References

  1. Kuhlman, B. et al. Design of a novel globular protein fold with atomic-level accuracy. Science 302, 1364–1368 (2003).

    Article  CAS  PubMed  Google Scholar 

  2. Brunette, T. J. et al. Exploring the repeat protein universe through computational protein design. Nature 528, 580–584 (2015).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  3. Thomson, A. R. et al. Computational design of water-soluble alpha-helical barrels. Science 346, 485–488 (2014).

    Article  CAS  PubMed  Google Scholar 

  4. Marcos, E. et al. Principles for designing proteins with cavities formed by curved beta sheets. Science 355, 201–206 (2017).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  5. Koga, N. et al. Principles for designing ideal protein structures. Nature 491, 222–227 (2012).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  6. Pan, X. et al. Expanding the space of protein geometries by computational design of de novo fold families. Science 369, 1132–1136 (2020).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  7. Dawson, W. M., Rhys, G. G. & Woolfson, D. N. Towards functional de novo designed proteins. Curr. Opin. Chem. Biol. 52, 102–111 (2019).

    Article  CAS  PubMed  Google Scholar 

  8. Correia, B. E. et al. Proof of principle for epitope-focused vaccine design. Nature 507, 201–206 (2014).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  9. Sesterhenn, F. et al. Boosting subdominant neutralizing antibody responses with a computationally designed epitope-focused immunogen. PLoS Biol. 17, e3000164 (2019).

    Article  PubMed  PubMed Central  Google Scholar 

  10. Sesterhenn, F. et al. De novo protein design enables the precise induction of RSV-neutralizing antibodies. Science 368, eaay5051 (2020).

  11. Silva, D. A. et al. De novo design of potent and selective mimics of IL-2 and IL-15. Nature 565, 186–191 (2019).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  12. Chevalier, A. et al. Massively parallel de novo protein design for targeted therapeutics. Nature 550, 74–79 (2017).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  13. Boyken, S. E. et al. De novo design of tunable, pH-driven conformational changes. Science 364, 658–664 (2019).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  14. Joh, N. H. et al. De novo design of a transmembrane Zn(2)(+)-transporting four-helix bundle. Science 346, 1520–1524 (2014).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  15. Dou, J. et al. De novo design of a fluorescence-activating beta-barrel. Nature 561, 485–491 (2018).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  16. Langan, R. A. et al. De novo design of bioactive protein switches. Nature 572, 205–210 (2019).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  17. Silva, D. A., Correia, B. E. & Procko, E. Motif-driven design of protein–protein interfaces. Methods Mol. Biol. 1414, 285–304 (2016).

    Article  CAS  PubMed  Google Scholar 

  18. Procko, E. et al. A computationally designed inhibitor of an Epstein–Barr viral Bcl-2 protein induces apoptosis in infected cells. Cell 157, 1644–1656 (2014).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  19. Berger, S. et al. Computationally designed high specificity inhibitors delineate the roles of BCL2 family proteins in cancer. eLife 5, 20352 (2016).

    Article  Google Scholar 

  20. Correia, B. E. et al. Computational design of epitope-scaffolds allows induction of antibodies specific for a poorly immunogenic HIV vaccine epitope. Structure 18, 1116–1126 (2010).

    Article  CAS  PubMed  Google Scholar 

  21. Azoitei, M. L. et al. Computation-guided backbone grafting of a discontinuous motif onto a protein scaffold. Science 334, 373–376 (2011).

    Article  CAS  PubMed  Google Scholar 

  22. Holliday, G. L., Fischer, J. D., Mitchell, J. B. & Thornton, J. M. Characterizing the complexity of enzymes on the basis of their mechanisms and structures with a bio-computational analysis. FEBS J. 278, 3835–3845 (2011).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  23. Jones, S. & Thornton, J. M. Principles of protein-protein interactions. Proc. Natl Acad. Sci. USA 93, 13–20 (1996).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  24. Rubinstein, N. D. et al. Computational characterization of B-cell epitopes. Mol. Immunol. 45, 3477–3489 (2008).

    Article  CAS  PubMed  Google Scholar 

  25. Lechner, H., Ferruz, N. & Hocker, B. Strategies for designing non-natural enzymes and binders. Curr. Opin. Chem. Biol. 47, 67–76 (2018).

    Article  CAS  PubMed  Google Scholar 

  26. Burton, A. J., Thomson, A. R., Dawson, W. M., Brady, R. L. & Woolfson, D. N. Installing hydrolytic activity into a completely de novo protein framework. Nat. Chem. 8, 837–844 (2016).

    Article  CAS  PubMed  Google Scholar 

  27. Polizzi, N. F. et al. De novo design of a hyperstable non-natural protein-ligand complex with sub-A accuracy. Nat. Chem. 9, 1157–1164 (2017).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  28. Bonet, J. et al. Rosetta FunFolDes—a general framework for the computational design of functional proteins. PLoS Comput. Biol. 14, e1006623 (2018).

    Article  PubMed  PubMed Central  Google Scholar 

  29. McLellan, J. S. et al. Structure of a major antigenic site on the respiratory syncytial virus fusion glycoprotein in complex with neutralizing antibody 101F. J. Virol. 84, 12236–12244 (2010).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  30. McLellan, J. S. et al. Structure of RSV fusion glycoprotein trimer bound to a prefusion-specific neutralizing antibody. Science 340, 1113–1117 (2013).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  31. McLellan, J. S. et al. Structural basis of respiratory syncytial virus neutralization by motavizumab. Nat. Struct. Mol. Biol. 17, 248–250 (2010).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  32. Fedechkin, S. O., George, N. L., Wolff, J. T., Kauvar, L. M. & DuBois, R. M. Structures of respiratory syncytial virus G antigen bound to broadly neutralizing antibodies. Sci. Immunol. 3, eaar3534 (2018).

  33. Bonet, J., Harteveld, Z., Sesterhenn, F., Scheck, A. & Correia, B. E. rstoolbox – a Python library for large-scale analysis of computational protein design data and structural bioinformatics. BMC Bioinf. 20, 240 (2019).

    Article  Google Scholar 

  34. Tian, D. et al. Structural basis of respiratory syncytial virus subtype-dependent neutralization by an antibody targeting the fusion glycoprotein. Nat. Commun. 8, 1877 (2017).

    Article  PubMed  PubMed Central  Google Scholar 

  35. Ngwuta, J. O. et al. Prefusion F-specific antibodies determine the magnitude of RSV neutralizing activity in human sera. Sci. Transl. Med. 7, 309ra162 (2015).

    Article  PubMed  PubMed Central  Google Scholar 

  36. Widjaja, I. et al. Characterization of epitope-specific anti-respiratory syncytial virus (Anti-RSV) antibody responses after natural infection and after vaccination with formalin-inactivated RSV. J. Virol. 90, 5965–5977 (2016).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  37. Phung, E. et al. Epitope-specific serological assays for RSV: conformation matters. Vaccines 7, 23 (2019).

  38. Graham, B. S., Gilman, M. S. A. & McLellan, J. S. Structure-based vaccine antigen design. Annu. Rev. Med. 70, 91–104 (2019).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  39. Lee, P. S. & Wilson, I. A. Structural characterization of viral epitopes recognized by broadly cross-reactive antibodies. Curr. Top. Microbiol. Immunol. 386, 323–341 (2015).

    CAS  PubMed  PubMed Central  Google Scholar 

  40. Sesterhenn, F., Bonet, J. & Correia, B. E. Structure-based immunogen design-leading the way to the new age of precision vaccines. Curr. Opin. Struct. Biol. 51, 163–169 (2018).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  41. Arts, R. et al. Detection of antibodies in blood plasma using bioluminescent sensor proteins and a smartphone. Anal. Chem. 88, 4525–4532 (2016).

    Article  CAS  PubMed  Google Scholar 

  42. Mousa, J. J. et al. Human antibody recognition of antigenic site IV on pneumovirus fusion proteins. PLoS Pathog. 14, 19 (2018).

    Article  Google Scholar 

  43. Santorelli, M., Lam, C. & Morsut, L. Synthetic development: building mammalian multicellular structures with artificial genetic programs. Curr. Opin. Biotechnol. 59, 130–140 (2019).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  44. Giordano-Attianese, G. et al. A computationally designed chimeric antigen receptor provides a small-molecule safety switch for T-cell therapy. Nat. Biotechnol. 38, 426–432 (2020).

    Article  CAS  PubMed  Google Scholar 

  45. Gainza-Cirauqui, P. & Correia, B. E. Computational protein design-the next generation tool to expand synthetic biology applications. Curr. Opin. Biotechnol. 52, 145–152 (2018).

    Article  CAS  PubMed  Google Scholar 

  46. Scheller, L., Strittmatter, T., Fuchs, D., Bojar, D. & Fussenegger, M. Generalized extracellular molecule sensor platform for programming cellular behavior. Nat. Chem. Biol. 14, 723–729 (2018).

    Article  CAS  PubMed  Google Scholar 

  47. Wood, C. W. et al. CCBuilder: an interactive web-based tool for building, designing and assessing coiled-coil protein assemblies. Bioinformatics 30, 3029–3035 (2014).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  48. Crank, M. C. et al. A proof of concept for structure-based vaccine design targeting RSV in humans. Science 365, 505–509 (2019).

    Article  CAS  PubMed  Google Scholar 

  49. Taylor, W. R. A ‘periodic table’ for protein structures. Nature 416, 657–660 (2002).

    Article  CAS  PubMed  Google Scholar 

  50. Huang, P. S. et al. RosettaRemodel: a generalized framework for flexible backbone protein design. PLoS ONE 6, e24109 (2011).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  51. Bhardwaj, G. et al. Accurate de novo design of hyperstable constrained peptides. Nature 538, 329–335 (2016).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  52. Chao, G. et al. Isolating and engineering human antibodies using yeast surface display. Nat. Protoc. 1, 755–768 (2006).

    Article  CAS  PubMed  Google Scholar 

  53. Rohou, A. & Grigorieff, N. CTFFIND4: fast and accurate defocus estimation from electron micrographs. J. Struct. Biol. 192, 216–221 (2015).

    Article  PubMed  PubMed Central  Google Scholar 

  54. de la Rosa-Trevin, J. M. et al. Scipion: a software framework toward integration, reproducibility and validation in 3D electron microscopy. J. Struct. Biol. 195, 93–99 (2016).

    Article  PubMed  Google Scholar 

  55. Scheres, S. H. RELION: implementation of a Bayesian approach to cryo-EM structure determination. J. Struct. Biol. 180, 519–530 (2012).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  56. Kabsch, W. XDS. Acta Crystallogr. D. 66, 125–132 (2010).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  57. Adams, P. D. et al. PHENIX: a comprehensive Python-based system for macromolecular structure solution. Acta Crystallogr. D. 66, 213–221 (2010).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  58. Emsley, P., Lohkamp, B., Scott, W. G. & Cowtan, K. Features and development of Coot. Acta Crystallogr. D. 66, 486–501 (2010).

    Article  CAS  PubMed  PubMed Central  Google Scholar 

Download references

Acknowledgements

We thank K. Lau, A. Reynaud, L. Durrer, S. Quinche, D. Hacker and F. Pojer in the PTPSP facility at EPFL for protein expression and X-ray crystallography support, D. Demurtas from CIME and S. Nazarov from PTBIOEM for electron microscopy support, L. Menin from the EPFL proteomics core facility for mass spectrometry support, the flow cytometry core facility for technical support and the gene expression core facility for help with next-generation sequencing. We thank V. Olieric at the Paul Scherrer Institute for operation of the X06DA beamline. The computational simulations were facilitated by the CSCS Swiss National Supercomputing Centre as well by SCITAS at EPFL. This work was supported by the Swiss initiative for systems biology (SystemsX.ch), the European Research Council (starting grant no. 716058), the Swiss National Science Foundation (grant no. 310030_163139), the NCCR Molecular Systems Engineering and the NCCR Chemical Biology. F.S. was supported by an SNF/Innosuisse BRIDGE Proof-of-Concept grant, and J.B. was funded by the EPFL Fellows postdoctoral fellowship. T.K. received funding from the Cluster of Excellence RESIST (grant no. EXC 2155) of the German Research foundation and from the German Center of Infection Research, J.T.C. was supported by the ERA-Net PrionImmunity project no. 01GM1503 of the German Federal Ministry of Education and Research. The funders had no role in study design, data collection and analysis, decision to publish or preparation of the manuscript.

Author information

Author notes

  1. These authors contributed equally: Che Yang, Fabian Sesterhenn.

Authors and Affiliations

  1. Institute of Bioengineering, École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland

    Che Yang, Fabian Sesterhenn, Jaume Bonet, Leo Scheller, Luciano A. Abriata, Stéphane Rosset, Sandrine Georgeon & Bruno E. Correia

  2. Swiss Institute of Bioinformatics, Lausanne, Switzerland

    Che Yang, Fabian Sesterhenn, Jaume Bonet, Leo Scheller, Luciano A. Abriata, Stéphane Rosset, Sandrine Georgeon & Bruno E. Correia

  3. Laboratory of Chemical Biology and Institute for Complex Molecular Systems, Department of Biomedical Engineering, Eindhoven University of Technology, Eindhoven, the Netherlands

    Eva A. van Aalen & Maarten Merkx

  4. Department of Biosystems Science and Engineering, ETH Zurich, Basel, Switzerland

    Leo Scheller & Martin Fussenegger

  5. Institute of Virology, Hannover Medical School, Hannover, Germany

    Johannes T. Cramer & Thomas Krey

  6. Department of Structural Biology, Stanford University School of Medicine, Stanford, CA, USA

    Xiaolin Wen & Theodore Jardetzky

  7. German Center for Infection Research (DZIF), Hannover, Germany

    Thomas Krey

Authors
  1. Che Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Fabian Sesterhenn
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jaume Bonet
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Eva A. van Aalen
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Leo Scheller
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Luciano A. Abriata
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Johannes T. Cramer
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Xiaolin Wen
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Stéphane Rosset
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Sandrine Georgeon
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. Theodore Jardetzky
    View author publications

    You can also search for this author in PubMed Google Scholar

  12. Thomas Krey
    View author publications

    You can also search for this author in PubMed Google Scholar

  13. Martin Fussenegger
    View author publications

    You can also search for this author in PubMed Google Scholar

  14. Maarten Merkx
    View author publications

    You can also search for this author in PubMed Google Scholar

  15. Bruno E. Correia
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

J.B. and E.A.A. contributed equally to this work. C.Y., F.S. and B.E.C. conceived the work and designed the experiments. C.Y. and F.S. performed computational design and experimental characterization. J.B. developed the TopoBuilder. E.A.A. performed work related to biosensors, and L.S. performed cellular assays. C.Y. solved X-ray structures and L.A.A. performed NMR characterization. J.T.C., X.W., S.R. and S.G. performed experiments and analyzed data. T.J., T.K., M.F. and M.M. contributed to data analysis and interpretation. F.S., C.Y. and B.E.C. wrote the manuscript, with input from all authors.

Corresponding author

Correspondence to Bruno E. Correia.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data

Extended Data Fig. 1 Structural view of the utilized functional motifs.

Left: Prefusion RSVF structure (PDB 4JHW) with site 0 (purple), site II (cyan) and site IV (orange) highlighted. Center/right: Close-up view on structural motifs, including the 2D10 epitope (wheat) that is presented by the RSV glycoprotein (RSVG), the structure of which has been determined as peptide bound to the 2D10 monoclonal antibody (PDB 5WN9). The secondary structure composition and residue lengths are indicated below. E, beta strand; H, alpha helix and L, loop structure.

Extended Data Fig. 2 Computational design, experimental screening and enrichment analysis of the 3E2H design series.

a, TopoBuilder assembly of the 3E2H topology (left) and a full-atom model after folding and design (right). The logo plots show the sequence diversity in selected core positions as predicted by Rosetta FunFolDes and the diversity for each position encoded in a combinatorial library (using degenerate codons) for yeast display screening. b, Detailed view on all positions experimentally sampled (green). c, Enrichment analysis following next-generation sequencing (NGS) of populations sorted for high affinity binding (x-axis) versus resistance to protease digestion (y-axis). n = 5,377 unique sequences were analyzed that were found under both selection conditions. d, Residue preferences for each position when comparing sequences positively enriched for both binding and protease resistance (c, quadrant I, blue) versus sequences that were negatively enriched (c, quadrant IV, red). 100-200 sequences each were analyzed. The heatmap shows the relative frequency of the respective amino acids in quadrant I versus quadrant IV, showing, for example, an overrepresentation of valine over isoleucine in position 7 in sequences from quadrant I.

Extended Data Fig. 3 Computational design, experimental screening and enrichment analysis of the 4E1H design series.

a, TopoBuilder assembly of the 4E1H topology. b, Detailed view on all positions experimentally sampled (green). c, Enrichment analysis of dual selection pressures, binding to 101F antibody and resistance to protease digestion. n = 92,779 unique sequences were analyzed that were found under both selection conditions. d, Residue preferences for indicated position in positively enriched versus negatively enriched sequences. See Extended Data Fig. 2 caption for further details.

Extended Data Fig. 4 Computational design, experimental screening and enrichment analysis of the 4E2H design series.

a, TopoBuilder assembly of the 4E2H topology and full-atom structure after Rosetta FunFolDes. b, Detailed view on all positions experimentally sampled (green). c, Enrichment analysis. n = 3,903 unique sequences were analyzed that were found under both selection conditions. d, Residue preferences for indicated position in positively enriched versus negatively enriched sequences. See Extended Data Fig. 2 caption for further details.

Extended Data Fig. 5 Computational design, experimental screening and enrichment analysis of the 3H1L_02 design series.

a, TopoBuilder assembly of the 3H1L_02 topology and full-atom structure after Rosetta FunFolDes, the epitope region is highlighted in purple. b, Detailed view on all positions experimentally sampled (green). c, Enrichment analysis. n = 99,338 unique sequences were analyzed that were found under both selection conditions. d, Residue preferences for indicated position in positively enriched versus negatively enriched sequences. See Extended Data Fig. 2 caption for further details.

Extended Data Fig. 6 Computational design, experimental screening and enrichment analysis of the 4H design series.

a, TopoBuilder assembly of the 4H topology and full-atom structure after Rosetta FunFoldDes, the Mota epitope region is colored in cyan and 2D10 epitope is colored in wheat. b, Detailed view on all positions experimentally sampled (green). c, Enrichment analysis. n = 287 unique sequences were analyzed that were found under both selection conditions. d, Residue preferences for indicated position in positively enriched versus negatively enriched sequences. See Extended Data Fig. 2 caption for further details.

Extended Data Fig. 7 Thermal denaturation curve of lead variants from each topology.

Designed proteins are melt from 20 °C to 95 °C as measured by CD. The melting temperature (Tm) is determined by the change of ellipticity at the global curve minimum.

Extended Data Fig. 8 Specificity of LUMABS sensor for the target antibody.

Luminescence spectra of the 4E2H.210 LUMABS sensor in the absence of antibody (black), compared to 2 µM 101 F IgG (blue) or 15 µM cetuximab (CTX, green), an anti-EGFR antibody, showing that the sensor only responds in the presence of epitope-specific antibodies.

Supplementary information

Supplementary Information

Supplementary Figs. 1–13, Tables 1–7 and refs. 1–3.

Reporting Summary

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yang, C., Sesterhenn, F., Bonet, J. et al. Bottom-up de novo design of functional proteins with complex structural features. Nat Chem Biol 17, 492–500 (2021). https://doi.org/10.1038/s41589-020-00699-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41589-020-00699-x

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing