Abstract
Understanding the factors governing the stability of fault slip is a crucial problem in fault mechanics1,2,3. The importance of fault geometry and roughness on fault-slip behaviour has been highlighted in recent lab experiments4,5,6,7 and numerical models8,9,10,11, and emerging evidence suggests that large-scale complexities in fault networks have a vital role in the fault-rupture process12,13,14,15,16,17,18. Here we present a new perspective on fault creep by investigating the link between fault-network geometry and surface creep rates in California, USA. Our analysis reveals that fault groups exhibiting creeping behaviour show smaller misalignment in their fault-network geometry. The observation indicates that the surface fault traces of creeping regions tend to be simple, whereas locked regions tend to be more complex. We propose that the presence of complex fault-network geometries results in geometric locking that promotes stick-slip behaviour characterized by earthquakes, whereas simpler geometries facilitate smooth fault creep. Our findings challenge traditional hypotheses on the physical origins of fault creep explained primarily in terms of fault friction19,20,21 and demonstrate the potential for a new framework in which large-scale earthquake frictional behaviour is determined by a combination of geometric factors and rheological yielding properties.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on SpringerLink
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
The surface creep data used in this study are available from ref. 33 (https://www.usgs.gov/data/creep-rate-models-california-faults-2023-us-national-seismic-hazard-model). The surface fault traces are from the USGS Quaternary Fault and Fold Database of the United States (https://www.usgs.gov/programs/earthquake-hazards/faults). The earthquake catalogue data can be downloaded from the Northern California Earthquake Data Center (NCEDC, https://doi.org/10.7932/NCEDC) and the Southern California Earthquake Center (SCEDC, https://doi.org/10.7909/C3WD3xH1). Source data are provided with this paper.
Code availability
Codes used in this research are available on Zenodo at https://doi.org/10.5281/zenodo.10982013 (ref. 59).
References
Avouac, J.-P. From geodetic imaging of seismic and aseismic fault slip to dynamic modeling of the seismic cycle. Annu. Rev. Earth Planet. Sci. 43, 233–271 (2015).
Harris, R. A. Large earthquakes and creeping faults. Rev. Geophys. 55, 169–198 (2017).
Bürgmann, R. The geophysics, geology and mechanics of slow fault slip. Earth Planet. Sci. Lett. 495, 112–134 (2018).
Harbord, C. W., Nielsen, S. B., De Paola, N. & Holdsworth, R. E. Earthquake nucleation on rough faults. Geology 45, 931–934 (2017).
Eijsink, A. M., Kirkpatrick, J. D., Renard, F. & Ikari, M. J. Fault surface morphology as an indicator for earthquake nucleation potential. Geology 50, 1356–1360 (2022).
Goebel, T. H., Brodsky, E. E. & Dresen, G. Fault roughness promotes earthquake‐like aftershock clustering in the lab. Geophys. Res. Lett. 50, e2022GL101241 (2023).
Morad, D., Sagy, A., Tal, Y. & Hatzor, Y. H. Fault roughness controls sliding instability. Earth Planet. Sci. Lett. 579, 117365 (2022).
Bhat, H. S., Olives, M., Dmowska, R. & Rice, J. R. Role of fault branches in earthquake rupture dynamics. J. Geophys. Res. Solid Earth 112, B11309 (2007).
Romanet, P., Bhat, H. S., Jolivet, R. & Madariaga, R. Fast and slow slip events emerge due to fault geometrical complexity. Geophys. Res. Lett. 45, 4809–4819 (2018).
Cattania, C. & Segall, P. Precursory slow slip and foreshocks on rough faults. J. Geophys. Res. Solid Earth 126, e2020JB020430 (2021).
Ozawa, S. & Ando, R. Mainshock and aftershock sequence simulation in geometrically complex fault zones. J. Geophys. Res. Solid Earth 126, e2020JB020865 (2021).
Perrin, C., Manighetti, I., Ampuero, J.-P., Cappa, F. & Gaudemer, Y. Location of largest earthquake slip and fast rupture controlled by along-strike change in fault structural maturity due to fault growth. J. Geophys. Res. Solid Earth 121, 3666–3685 (2016).
Tsai, V. C. & Hirth, G. Elastic impact consequences for high-frequency earthquake ground motion. Geophys. Res. Lett. 47, e2019GL086302 (2020).
Biasi, G. P. & Wesnousky, S. G. Rupture passing probabilities at fault bends and steps, with application to rupture length probabilities for earthquake early warning. Bull. Seismol. Soc. Am. 111, 2235–2247 (2021).
Chu, S. X., Tsai, V. C., Trugman, D. T. & Hirth, G. Fault interactions enhance high-frequency earthquake radiation. Geophys. Res. Lett. 48, e2021GL095271 (2021).
Rodriguez Padilla, A. M., Oskin, M. E., Rockwell, T. K., Delusina, I. & Singleton, D. M. Joint earthquake ruptures of the San Andreas and San Jacinto faults, California, USA. Geology 50, 387–391 (2021).
Tsai, V. C., Hirth, G., Trugman, D. T. & Chu, S. X. Impact versus frictional earthquake models for high-frequency radiation in complex fault zones. J. Geophys. Res. Solid Earth 126, e2021JB022313 (2021).
Gauriau, J. & Dolan, J. F. Relative structural complexity of plate-boundary fault systems controls incremental slip-rate behavior of major strike-slip faults. Geochem. Geophys. Geosyst. 22, e2021GC009938 (2021).
Scholz, C. Earthquakes and friction laws. Nature 391, 37–42 (1998).
Bizzarri, A. & Bhat, H. S. (eds) The Mechanics of Faulting: From Laboratory to Real Earthquakes (Research Signpost, 2012).
Kaneko, Y., Fialko, Y., Sandwell, D. T., Tong, X. & Furuya, M. Interseismic deformation and creep along the central section of the North Anatolian Fault (Turkey): InSAR observations and implications for rate-and-state friction properties. J. Geophys. Res. Solid Earth 118, 316–331 (2013).
Lockner, D., Morrow, C., Moore, D. & Hickman, S. Low strength of deep San Andreas fault gouge from SAFOD core. Nature 472, 82–85 (2011).
Moore, D. E. & Rymer, M. J. Talc-bearing serpentinite and the creeping section of the San Andreas fault. Nature 448, 795–797 (2007).
Moore, D. E., McLaughlin, R. J. & Lienkaemper, J. J. Serpentinite in a creeping trace of the Bartlett Springs Fault, Northern California. Geological Society of America Abstracts with Programs, Vol. 47, No. 7, p. 775, Paper No. 306-3 (2015).
Lindsey, E. O. & Fialko, Y. Geodetic constraints on frictional properties and earthquake hazard in the Imperial Valley, Southern California. J. Geophys. Res. Solid Earth 121, 1097–1113 (2016).
Wei, M., Sandwell, D. & Fialko, Y. A silent Mw 4.7 slip event of October 2006 on the Superstition Hills fault, southern California. J. Geophys. Res. Solid Earth 114, B07402 (2009).
Funning, G. J., Burgmann, R., Ferretti, A., Novali, F. & Fumagalli, A. Creep on the Rodgers Creek fault, northern San Francisco Bay area from a 10 year PS-InSAR dataset. Geophys. Res. Lett. 34, L19306 (2007).
Lienkaemper, J. J., McFarland, F. S., Simpson, R. W. & Caskey, S. J. Using surface creep rate to infer fraction locked for sections of the San Andreas fault system in northern California from alignment array and GPS data. Bull. Seismol. Soc. Am. 104, 3094–3114 (2014).
Jolivet, R. et al. The burst‐like behavior of aseismic slip on a rough fault: the creeping section of the Haiyuan fault, China. Bull. Seismol. Soc. Am. 105, 480–488 (2014).
Jolivet, R. et al. Spatio-temporal evolution of aseismic slip along the Haiyuan fault, China: implications for fault frictional properties. Earth Planet. Sci. Lett. 377–378, 23–33 (2013).
Li, Y., Bürgmann, R. & Taira, T. Spatiotemporal variations of surface deformation, shallow creep rate, and slip partitioning between the San Andreas and southern Calaveras Fault. J. Geophys. Res. Solid Earth 128, e2022JB025363 (2023).
Lindsey, E. O., Fialko, Y., Bock, Y., Sandwell, D. T. & Bilham, R. Localized and distributed creep along the southern San Andreas Fault. J. Geophys. Res. Solid Earth 119, 7909–7922 (2014). (2014).
Johnson, K. M., Murray, J. R. & Wespestad, C. Creep rate models for the 2023 US National Seismic Hazard Model: physically constrained inversions for the distribution of creep on California faults. Seismol. Res. Lett. 93, 3151–3169 (2022).
Mitchell, T. M. & Faulkner, D. R. The nature and origin of off-fault damage surrounding strike-slip fault zones with a wide range of displacements: a field study from the Atacama fault system, northern Chile. J. Struct. Geol. 31, 802–816 (2009).
Power, W. L., Tullis, T. E., Brown, S. R., Boitnott, G. N. & Scholz, C. H. Roughness of natural fault surfaces. Geophys. Res. Lett. 14, 29–32 (1987).
Candela, T. et al. Roughness of fault surfaces over nine decades of length scales. J. Geophys. Res. Solid Earth 117, B08409 (2012).
Wang, K. & Bilek, S. L. Invited review paper: fault creep caused by subduction of rough seafloor relief. Tectonophysics 610, 1–24 (2014).
Reches, Z. & Fineberg, J. Earthquakes as dynamic fracture phenomena. J. Geophys. Res. Solid Earth 128, e2022JB026295 (2023).
Marone, C., & Saffer, D. M. in The Seismogenic Zone of Subduction Thrust Faults (eds Dixon, T. H. & Moore, J. C.) 346–369 (Columbia Univ. Press, 2007).
Holden, C. et al. The 2016 Kaikōura earthquake revealed by kinematic source inversion and seismic wavefield simulations: slow rupture propagation on a geometrically complex crustal fault network. Geophys. Res. Lett. 44, 11,320–11,328 (2017).
Swanson, M. T. in Earthquakes: Radiated Energy and the Physics of Faulting (eds Abercrombie, R. et al.) 167–179 (American Geophysical Union, 2006).
Antoine, S. L., Klinger, Y., Delorme, A. & Gold, R. D. Off-fault deformation in regions of complex fault geometries: the 2013, Mw7.7, Baluchistan rupture (Pakistan). J. Geophys. Res. Solid Earth 127, e2022JB024480 (2022).
Liu, Y.-K., Ross, Z. E., Cochran, E. S. & Lapusta, N. A unified perspective of seismicity and fault coupling along the San Andreas Fault. Sci. Adv. 8, eabk1167 (2022).
Dunham, E. M., Belanger, D., Cong, L. & Kozdon, J. E. Earthquake ruptures with strongly rate-weakening friction and off-fault plasticity, part 2: nonplanar faults. Bull. Seismol. Soc. Am. 101, 2308–2322 (2011).
Ross, E. O., Reber, J. E. & Titus, S. J. Relating slip behavior to off-fault deformation using physical models. Geophys. Res. Lett. 49, e2021GL096784 (2022).
Boettcher, M. S. & Jordan, T. H. Earthquake scaling relations for mid-ocean ridge transform faults. J. Geophys. Res. Solid Earth 109, B12302 (2004).
McGuire, J. et al. Variations in earthquake rupture properties along the Gofar transform fault, East Pacific Rise. Nat. Geosci. 5, 336–341 (2012).
Ikari, M. J. & Kopf, A. J. Seismic potential of weak, near-surface faults revealed at plate tectonic slip rates. Sci. Adv. 3, e1701269 (2017).
Chaussard, E. et al. Interseismic coupling and refined earthquake potential on the Hayward-Calaveras fault zone. J. Geophys. Res. Solid Earth 120, 8570–8590 (2015).
Murray, J. R., Minson, S. E. & Svarc, J. L. Slip rates and spatially variable creep on faults of the northern San Andreas system inferred through Bayesian inversion of Global Positioning System data. J. Geophys. Res. Solid Earth 119, 6023–6047 (2014).
Kaduri, M., Gratier, J.-P., Renard, F., Çakir, Z. & Lasserre, C. The implications of fault zone transformation on aseismic creep: example of the North Anatolian Fault, Turkey. J. Geophys. Res. Solid Earth 122, 4208–4236 (2017).
Aslan, G. et al. Shallow creep along the 1999 Izmit earthquake rupture (Turkey) from GPS and high temporal resolution interferometric synthetic aperture radar data (2011–2017). J. Geophys. Res. Solid Earth 124, 2218–2236 (2019).
Jolivet, R. et al. Daily to centennial behavior of aseismic slip along the central section of the North Anatolian Fault. J. Geophys. Res. Solid Earth 128, e2022JB026018 (2023).
Zelenin, E., Bachmanov, D., Garipova, S., Trifonov, V. & Kozhurin, A. The Active Faults of Eurasia Database (AFEAD): the ontology and design behind the continental-scale dataset. Earth Syst. Sci. Data. 14, 4489–4503 (2022).
Dalaison, M., Jolivet, R., van Rijsingen, E. M. & Michel, S. The interplay between seismic and aseismic slip along the Chaman fault illuminated by InSAR. J. Geophys. Res. Solid Earth 126, e2021JB021935 (2021).
Barnhart, W. D. Fault creep rates of the Chaman fault (Afghanistan and Pakistan) inferred from InSAR. J. Geophys. Res. Solid Earth. 122, 372–386 (2017).
Fattahi, H. & Amelung, F. InSAR observations of strain accumulation and fault creep along the Chaman Fault system, Pakistan and Afghanistan. Geophys. Res. Lett. 43, 8399–8406 (2016).
Ruleman, C. A., Crone, A. J., Machette, M. N., Haller, K. M., & Rukstales, K. S. Map and database of probable and possible Quaternary faults in Afghanistan. U.S. Geological Survey Open-File Report 2007-1103 (2007).
Lee, J. Data and code for ‘Fault network geometry influences earthquake frictional behavior’. Zenodo https://doi.org/10.5281/zenodo.10982013 (2024).
Fenimore, C., Libert, J. & Brill, M. Algebraic constraints implying monotonicity for cubics. National Institute of Standards and Technology https://doi.org/10.6028/NIST.IR.6453 (2000).
Acknowledgements
The work presented in this paper was supported by National Science Foundation grants EAR-2146640 and EAR-2231705.
Author information
Authors and Affiliations
Contributions
V.C.T. conceived and designed the study. J.L. led the investigation, including data analysis, visualization and interpretation. D.T.T. and A.C. contributed to the statistical analysis and interpretation of fault complexity and creep rate data. G.H. helped with the interpretation of results in the framework of rock mechanics and frictional theory. J.L. took the lead in drafting the manuscript. All authors provided input on the analysis, reviewed the results, contributed to editing the manuscript and approved the final version of the manuscript. V.C.T., D.T.T. and G.H. secured funding to support the project.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature thanks Romain Jolivet and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
Extended Data Fig. 1 Scatter plots for fault misalignment and fault density.
a, Scatter plot of surface creep rate versus fault misalignment. b, Scatter plot of surface creep rate normalized by accumulated seismic moment versus fault misalignment. The negative correlation between fault misalignment and normalized creep remains consistent. c, Scatter plot of surface creep rate and fault misalignment versus fault density. Fault density correlates with fault misalignment but does not show any correlation with creep rates. a–c, Spearman’s rank correlation (RC) coefficients between the variables are in the subplot titles and the red error bar plots indicate the means and standard deviations for the binned intervals.
Extended Data Fig. 2 Fault misalignment and creep outside California.
a, Fault misalignment and fault creep rates along the North Anatolian Fault. Inner circles indicate surface creep rates51,52,53 and outer circles indicate measured fault misalignments. Surface fault traces are coloured in white54. b, Scatter plot of fault misalignment and surface creep rates along the North Anatolian Fault. Spearman’s rank correlation (RC) coefficient between the two is indicated in the subplot title. c, Fault misalignment and fault creep rates along the Chaman Fault. Inner circles indicate surface creep rates55 and outer circles indicate measured fault misalignments. Surface fault traces are coloured in white58. d, Scatter plot of fault misalignment and surface creep rates along the Chaman Fault. Spearman’s RC coefficient between the two is indicated in the subplot title.
Extended Data Fig. 3 Average surface creep rates and fault misalignment for different fault segments in California.
Spearman’s rank correlation (RC) coefficient between the two is indicated in the subplot title and the dashed black line indicates a monotonic cubic polynomial of best fit60. The shaded green area is a 95% confidence interval around the best fit. The inset map in the upper-right corner depicts the fault segments using the same colours as in the main plot.
Extended Data Fig. 4 Creep rate sampling.
Comparison of surface creep rates sampled at 10-km intervals along faults in California (red) with the compiled measurements from ref. 33 (black). The number of estimates for each fault is indicated in the subplot titles. Estimates and errors at the sampled locations are calculated as the weighted average of measurements within 10 km.
Extended Data Fig. 5 Tests of robustness.
a, Variation in the mean and standard deviation of fault misalignment for locked and creeping faults for different creep cutoff thresholds. b, Changes in the mean and standard deviation of fault misalignment for locked and creeping faults (threshold: 3 mm per year), considering various radius circles for measuring fault-network misalignment. The distinct distribution of fault misalignment between locked and creeping faults remains consistent, regardless of the chosen cutoff threshold or radius circle used to measure fault complexity. As the radius increases, the fault misalignment in creeping faults with simple geometries remains relatively constant. By contrast, for locked faults with complex geometries, fault misalignment increases as a result of the violation of the fractality assumption at smaller scales, attributed to limited resolution.
Extended Data Fig. 6 Fault metric regions.
Fault metrics are computed within the red circles.
Supplementary information
Source data
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Lee, J., Tsai, V.C., Hirth, G. et al. Fault-network geometry influences earthquake frictional behaviour. Nature 631, 106–110 (2024). https://doi.org/10.1038/s41586-024-07518-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41586-024-07518-6
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.