Testing quantum electrodynamics in extreme fields using helium-like uranium

Quantum electrodynamics (QED), the quantum field theory that describes the interaction between light and matter, is commonly regarded as the best-tested quantum theory in modern physics. However, this claim is mostly based on extremely precise studies performed in the domain of relatively low field strengths and light atoms and ions1–6. In the realm of very strong electromagnetic fields such as in the heaviest highly charged ions (with nuclear charge Z ≫ 1), QED calculations enter a qualitatively different, non-perturbative regime. Yet, the corresponding experimental studies are very challenging, and theoretical predictions are only partially tested. Here we present an experiment sensitive to higher-order QED effects and electron–electron interactions in the high-Z regime. This is achieved by using a multi-reference method based on Doppler-tuned X-ray emission from stored relativistic uranium ions with different charge states. The energy of the 1s1/22p3/2 J = 2 → 1s1/22s1/2 J = 1 intrashell transition in the heaviest two-electron ion (U90+) is obtained with an accuracy of 37 ppm. Furthermore, a comparison of uranium ions with different numbers of bound electrons enables us to disentangle and to test separately the one-electron higher-order QED effects and the bound electron–electron interaction terms without the uncertainty related to the nuclear radius. Moreover, our experimental result can discriminate between several state-of-the-art theoretical approaches and provides an important benchmark for calculations in the strong-field domain.


Article
a measurement in the mid-Z range has been performed, on hydrogen-like tin (Z = 50) (ref.24) in which, however, two-loop QED effects could not yet be tested because of deficiencies in the theoretical predictions.
For transition energies, the most suitable systems are hydrogen-like (H-like, one bound electron), helium-like (He-like, two bound electrons) and lithium-like (Li-like, three bound electrons) heavy ions-that is, few-body systems simple enough to allow for very high-accuracy QED predictions 25,26 that can be then tested experimentally.
For H-like systems, the most precise measurement up to now has been performed for the 1s Lamb shift in H-like uranium that provided a test of the first-order QED contributions at a per cent level but was insufficient to test higher-order QED effects 27 .
He-like heavy ions are the simplest multi-electron systems that offer the unique possibility of high-precision tests of electron-electron interactions in the presence of strong electromagnetic fields.For these systems, there have been only a few measurements performed up to now and their precision has been insufficient for a meaningful test of the two-loop or two-electron QED effects 26,[28][29][30] .
Most of these measurements have been performed at large-scale accelerators and heavy-ion storage rings, in which sufficient quantities of heavy HCI can be produced by stripping the bound electrons at a few hundred MeV per nucleon (MeV/u) kinetic energies, and then be decelerated and stored under well-controlled conditions for precision spectroscopy 31 .The energy resolution of the commonly used semiconductor detectors along with uncertainties stemming from the relativistic Doppler effect have been the main limiting factors for further improvement of precision.
For Li-like heavy ions, very accurate measurements are available-for example, for Li-like uranium performed with an Electron Beam Ion Trap (EBIT) 32 .But in these heavy ions, the respective contributions from one-electron QED (including nuclear size and polarization) and many-electron effects could not be disentangled.To provide a stringent test of high-order QED effects, several attempts have been made in recent years to substantially enhance the experimental precision by using high-resolution detection methods: cryogenic microcalorimeter detectors 33,34 and a transmission crystal diffraction spectrometer 35 .In spite of successful proof-of-principle measurements, in particular regarding the high energy resolution, no significant improvement of the experimental uncertainty has been achieved up to now, partially because of the low detection efficiency of these devices and because of the systematic errors related to the relativistic Doppler effect.
Here we report on a precise measurement of the 1s 1/2 2p 3/2 J = 2 → 1s 1/2 2s 1/2 J = 1 intrashell transition energy in He-like uranium (Z = 92, Zα = 0.67) per formed with a specially designed twin high-resolution crystal spectro meter.The achieved experimental accuracy enables us to test second-order QED effects and radiative electron-electron interaction terms in high-Z He-like ions-that is, in the presence of an extremely strong Coulomb field.Energy differences between the intrashell transition in He-like uranium and the analogous transitions in Li-like and beryllium-like (Be-like, four bound electrons) uranium ions are also obtained, making it possible to disentangle one-electron and many-electron QED effects.Furthermore, this result enables us to differentiate between different theoretical methods for describing few-electron systems with and without incorporating second-order one-electron and two-electron QED corrections in strong Coulomb fields.

Experimental methods
The experiment is performed at the experimental storage ring (ESR) at GSI in Darmstadt in which a beam of H-like uranium ions is stored, cooled and decelerated to an energy of 41.03 MeV/u (see the Methods for more details).The He-like U 1s 1/2 2p 3/2 J = 2 → 1s 1/2 2s 1/2 J = 1 intrashell transition is produced by electron capture in H-like uranium ions interacting with an internal gas-jet target and the subsequent decay from excited levels.The transition X-rays are detected using two high-resolution crystal spectrometers placed at observation angles of θ = ±90° near the gas-target chamber, on the inner and outer sides of the storage ring (Fig. 1), and equipped with X-ray charge-coupled devices (CCDs) as position-sensitive detectors.The main reason for using two spectrometers is to collect a larger set of data, as well as to have redundancy in the measurement of the observation angles to reduce the final statistical and systematic uncertainties.The photon energy E′ measured by the spectrometer is determined by the value of θ, the ion velocity v and the photon energy E in the ion reference frame by the relativistic Doppler formula E′ = E/[γ(1 − βcosθ)], where β = v/c is the ion velocity in the units of the speed of light (s) and γ β = 1/ (1 − )

Article
Then with θ determined in this manner, the unknown He-like uranium transition energy E can be obtained by letting E ref be the Li-like or Be-like transition energies in the same formula.For the specific case of θ ≈ 90°, the use of the reference energy from a moving ion results in a drastic reduction of the systematic uncertainty related to the observation angle by a factor proportional to |β − β ref |/β (1/7.3 and 1/50 when Li-like U or Be-like U are used as references, respectively) 39 .X-rays emitted by the different ion transitions are collected for several days, starting with Li-like uranium (for a duration of 11 h, resulting in a total amount of approximately 1,400 photons per spectrometer), followed by He-like uranium (84 h, 1,800 photons) and finally with Be-like uranium (24 h, 700 photons).The higher statistics for He-like uranium are intended to compensate for the lower peak-to-background ratio observed during the measurement.To calibrate and control the stability of the spectrometer, the zinc Kα 1 lines were measured every 12 h.During the entire period, variations in the peak position of less than 6 μm are measured for the second-order reflected lines, which corresponds to variations of less than 10 meV for the energy of first-order reflected transitions.The resulting images of the spectral lines detected by the outer spectrometer are presented in Fig. 1d.Similar images are obtained for the inner spectrometer.The slope of the lines is because of the relativistic Doppler effect.Different y positions on the CCDs correspond to different values of the observation angle θ and thus to different line energies, yielding the slope.Details of the determination of spectral line positions are presented in the Methods.
The final value of the He-like U transition energy E He is obtained from the weighted average of four dependent measurements corresponding to the two possible moving reference lines (Li-like and Be-like U) for each of the two spectrometers (see the Methods for more details).The final value is E He = 4,509.763± 0.034 stat ± 0.162 syst eV.Here and in the rest of the Article, the statistical and systematic uncertainties indicate the value of 1 standard deviation.The systematic uncertainty of the absolute energy of the He-like U intrashell transition is dominated by uncertainties of the reference energies of the Li-like and Be-like uranium transitions.This is not the case for the energy differences between intrashell transitions of the different charge states of uranium for which much more accurate values are obtained.These differences are only negligibly affected by the uncertainties of the reference line energies that, in this case, determine only the uncertainty of the observation angle.The energy differences between the intrashell transitions in He-like, Li-like and Be-like uranium are obtained by subtracting the value E ref from the energy E from equation (1).The corresponding average values are E He-Li = 50.233± 0.037 stat ± 0.037 syst eV, E He-Be = 8.175 ± 0.042 stat ± 0.005 syst eV and E Be-Li = 42.072± 0.041 stat ± 0.031 syst eV.As expected, the uncertainty due to E ref is partially cancelled out resulting in a drastic reduction of the systematic uncertainty.

Discussion
Our value for the 1s 1/2 2p 3/2 J = 2 → 1s 1/2 2s 1/2 J = 1 intrashell transition in He-like uranium is in agreement with the result of the previous measurement 30 but with a gain in accuracy by a factor of more than 6 (Table 1 and Fig. 2a).It validates the most recent prediction using multi-configuration Dirac-Fock (MCDF) calculations, including QED effects, as well as ab initio QED calculations, based on the two-time Green's functions 12,30,40,41 (see the Methods for more details).However, a clear disagreement is seen with older calculations based on relativistic configuration interaction (RCI) and relativistic many-body perturbation theory as well as a slight disagreement with the result of the unified approach [42][43][44] .
As can be seen from Fig. 3a, our accuracy enables us to access elusive contributions of two-loop one-electron QED terms-that is, second-order perturbation terms with respect to the electromagnetic coupling constant (proportional to α 2 ) and non-perturbative  2  and 3).1e and 2e stand for one-electron and two-electron contributions, respectively.with respect to the electron-nucleus interaction (proportional to Zα).The uncertainty of state-of-the-art theoretical predictions (ab initio and MCDF) is mainly because of the uncertainty of 0.086 eV of the one-electron two-loop contributions.The uncertainty due to the finite size of the nucleus contributes only 0.034 eV (for details, see Extended Data Table 2).Moreover, our experimental result provides a test of bound electron-electron interaction terms to an unprecedented degree of accuracy in heavy two-electron atomic systems.
A comparison of the measured intrashell transition energy difference between He-like and Li-like U with previous experiments and theoretical predictions is presented in Table 2 and Fig. 2b.As can be seen, a gain in accuracy of more than a factor of 20 is obtained with respect to the available previous measurement 30 .This accuracy is of the same order as the uncertainty of state-of-the-art theoretical predictions.Along with the experimental uncertainty, the theoretical uncertainty is also reduced in this case because of the cancellation of the terms related to one-electron QED, finite nuclear size and nuclear polarization.In particular, our value is in very good agreement (less than 1.5 standard deviations) with the most recent ab initio QED predictions 12,30 .A worse agreement is visible with MCDF-based predictions (2.2 and 3.4 standard deviations for He-Li and He-Be differences, respectively).A larger discrepancy (more than 20 and 3.8 standard deviations for He-Li and Be-Li differences, respectively) is observed with older predictions based on RCI methods 43,45 that do not include some QED contributions.As seen in Fig. 3b, the relative transition energy measurement between the He-like and Li-like ions opens a way to exclusively measure the effect of bound electron-electron interactions in such atomic systems.This is not the case for energy differences involving Be-like ions, in which the experimental accuracy is better than the theoretical one because of the presence of quasi-degenerate states in Be-like atomic systems, which inhibits the convergence of the calculations 12 .In this case, a gain by a factor of 10 with respect to the previous measurement 36 is obtained.
In conclusion, we have performed a high-precision measurement of the 1s 1/2 2p 3/2 J = 2 → 1s 1/2 2s 1/2 J = 1 intrashell transition in the heaviest two-electron system-that is, He-like uranium, which is sensitive to one-electron higher-order (two-loop) QED effects.Moreover, by measuring the energy differences with respect to analogous intrashell transitions in Li-like and Be-like uranium ions, the bound electron-electron interaction in the presence of the strongest electromagnetic fields, including the two-electron radiative QED effects, is accurately tested as well.Overall, our experimental results are in good agreement with the most recent ab initio QED calculations as well as with those based on the MCDF approach but do not agree with other predictions based on the relativistic many-body perturbation theory and RCI methods.To obtain such an accuracy, a method of double reference (moving and stationary) is used, which allows for control and reduction of the main systematic uncertainties related to the relativistic velocity of the stored ions.This method could be implemented in all future measurements involving Doppler tuning.Further improvements in the experimental accuracy would be possible by reducing the diameter of the gas-jet target, by aligning the two spectrometers along the same axis, as well as by using light H-like ions as a more accurate moving reference, which can independently be measured in EBITs.
Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material.If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.

Setup details
The experiment is performed at the ESR at GSI in Darmstadt 47 , where a beam of around 4 × 10 7 H-like uranium ions is stored, cooled and decelerated from a production energy of 296 MeV/u to an energy of 41.03 MeV/u.The momentum spread of the ion beam is Δp/p ≈ 10 −5 , and its width is about 2 mm.Excited He-like uranium ions are obtained by electron capture from H-like uranium ions interacting with an internal gas-jet target 48 .The target is a supersonic nitrogen gas-jet with a width of about 5 mm and a typical areal density of 10 12 particles per cm 2 , which guaranteed single-collision conditions in the ion-target interaction.
The X-rays are detected by two high-resolution crystal spectrometers placed at observation angles of θ = ±90° near the gas-target chamber, on the inner and outer sides of the storage ring (Fig. 1).The two spectrometers are mounted in the Johann geometry with 50 × 25 mm 2 cylindrically bent germanium (220) crystals and a radius of curvature of R = 2,000 mm.The two spectrometers are equipped with two X-ray CCD cameras: Andor iKon-L SO in the outer spectrometer and Great Eyes 2048 2048 BI in the inner spectrometer.Both cameras have 2,048 × 2,048 pixels with a size of 13.5 × 13.5 μm 2 .Both spectrometers are under vacuum (10 −5 −10 −4 mbar) to reduce the X-ray absorption.For both moving and stationary X-ray sources, the corresponding Bragg angle of the crystal spectrometers is fixed to Θ = 45.85°.The resulting detectable energy range is about 80 eV for the first-order reflection.For each arm, the distance D between the CCD and the crystal is fixed by the focusing conditions of the Johann geometry, namely, D = R sinΘ = 1,435 mm.The distance between the gas-jet target and the crystal is reduced to 885 mm to increase the spectrometer efficiency and make the spectrometer not sensitive to spatial inhomogeneities of the source.
The energy calibration is performed using a zinc Kα 1 line, produced by irradiating at 45° a movable 10-μm thick target with an X-ray tube equipped with a Mo cathode.The thickness and the angle of the target are chosen to have X-rays emitted in both directions of the alignment axis of the common spectrometers, passing through the ESR gas-target chamber for the inner spectrometer (Fig. 1).
From the comparison between stationary and moving energy references, the observation angle is determined with an accuracy δθ = 0.011°.This value corresponds to an uncertainty of 0.17 mm of the gas-jet centre position, much smaller than 1 mm, the uncertainty obtained by standard alignment tools used in past experiments 35 and better than the typical accuracy expected with standard optical alignments.Its contribution to the final He-like U transition energy measurement is additionally reduced by the use of the moving ion reference line.For the observation angle of θ = ± 90°, uncertainty related to the ion velocity plays a marginal part 39 .

CCD image acquisition and fitting
The CCD cameras are operated in a single-photon counting mode, and the images are analysed using an algorithm similar to those in refs.49,50.By counting only single photons, the CCD noise is efficiently suppressed.Furthermore, by using the energy resolution of the CCDs and setting a small energy window around the energy of interest, background photons are also very efficiently suppressed.
The position of the spectral lines is determined by a two-dimensional fit of the CCD images with a model function where the x and y coordinates indicate the dispersive axis and the axis perpendicular to it, respectively.The line slope b is mainly because of the Doppler shift using the corresponding different observation angle.The quadratic dependency is normally expected for point-like sources.The position of the line is determined by the value of a, that is, the intersection between the spectral line and the middle of the CCD, corresponding to y = y 0 .The typical accuracy of the spectral line position is 0.8 pixels and 0.08 pixels for the moving ions and the stationary reference line, respectively (1 pixel = 13.5 μm), which corresponds to 4 meV for the first-order reflections and 0.8 meV for the second-order reflections.
For f(x), different profiles are considered including Gaussian, super-Gaussian and Lorentzian.The determination of the most adapted profile and the associated parameters are obtained by use of the Bayesian data analysis program Nested_fit [51][52][53] .This code is also used to assign probabilities to the different possible profiles by the computation of the Bayesian evidence using the nested sampling method.The most adapted profile is the convolution between a flat distribution and a Gaussian 54 .This kind of profile reflects, using the Doppler shift, the density distribution of the X-ray source, that is, the region resulting from the intersection of the gas-jet target (with a uniform density over a circle of about 5 mm of diameter determined by the skimmer geometry), with the ion beam (with a Gaussian distribution of a typical size of 2 mm) 55 .As shown in Extended Data Fig. 1, the collected data are in good agreement with the simulated ones obtained for a gas-jet target with a diameter of about 5.8 mm and a Gaussian ion beam with a full width at half maximum of 2 mm.This size is compatible with the expectations and past direct measurements (6.2−7.3 mm) obtained with another gas at different pressure and temperature 56 .The main difference between the simulation and the modelling curve is the sharpness of the border that depends on the width of the Gaussian ion beam that can slightly vary for different beam settings.Note that the determination of the line position does not depend on the choice of the profile.For the stationary Zn source, f(x) is mainly determined by the natural width of the transitions together with the reflection curve of the diffracting crystal and the focusing properties of the spectrometers.The dependency on (y − y 0 ) 2 is not considered because it does not make a significant contribution to our setup 54 .The projection of spectral lines and their modelling relative to the outer spectrometer are presented in Extended Data Fig. 1.
Asymmetries of the line profiles arising from possible satellite lines or spectrometer aberrations, which could cause a bias on the line position evaluation, are investigated by two different approaches.The first approach consists of the comparison of the two sides of the projected line using the Kolmogorov-Smirnov test.The second approach uses Nested_fit to evaluate models with one line or two unresolved lines 54 .Both methods confirm the absence of asymmetries.

Uncertainty budget and final value average
Considering the two spectrometer arms and the two possible moving references, four evaluations of the He-like U intrashell energy are obtained.For each evaluation, a typical uncertainty budget is given in Extended Data Table 1, in which contributions smaller than 0.5 meV are not listed.Statistical uncertainties of the moving ions are about one order of magnitude higher than the uncertainties associated with the zinc reference line.
Moving lines are always compared using the stationary reference line as intermediate.Li-like and Be-like intrashell transitions 36,37 .In the absolute energy evaluation, such a contribution causes a systematic effect of 0.246 eV when Li-like ions are used as reference (Extended Data Table 1).These significantly higher values than δE mov are mainly because δE mov acts twice in equation ( 1): first to determine the observation angle and second as a reference line.Only the contribution of δE mov for the observation angle is present in the relative energy measurement.Measurements using Be-like ions as reference have smaller systematic uncertainties (0.217 eV for the absolute energy and 0.005 eV for the relative energy) because of the much stronger reduction of the observation angle uncertainty because of the proximity of the Be-like and He-like ion velocities (see section 'Experimental methods').The energy of the stationary reference includes the literature uncertainty (73 meV; ref. 38) plus the uncertainty of the line modelling (26 meV) obtained from the difference between the line maximum and the position of the strongest component of the doublet of Voigt profiles used for the fit.The velocity of the ions is defined by the velocity of the electron in the electron cooler device 31 .The corresponding uncertainty can be decomposed into two sources.The first one is related to the voltage divider linearity, which was calibrated by Physikalisch-Technische Bundesanstalt in 2018, with a relative accuracy of 4.3 × 10 −5 for the range of interest.The second source is the offset uncertainty, related to the space charge density effect of the electron beam and the contact potentials between the electron cooler elements.This contribution is estimated conservatively to be 5 V.
The four energy evaluations corresponding to the use of the two moving references and the two spectrometers are shown in Extended Data Fig. 2. The evaluations using the Li-like U transition as a reference give slightly lower values for the He-like transition energy than the evaluations based on the Be-like U transition.However, all measurements are compatible with each other within the total uncertainty, mainly because of the reference transition energy uncertainties.When the same reference line is used, measurements from different spectrometers are compatible with each other within the statistical uncertainties only.
The final energy value ⟨E⟩ and associated uncertainty σ is obtained by the standard method of the weighted average of correlated measurements (see, for example, refs.57-59) with In the above formula, E i corresponds to the different energy evaluations from equation (1) from different spectrometers and using different reference lines, and p k the different independent parameters with the associated uncertainties δp k .The different values of E i are strongly correlated by common parameters as the moving reference energy, the stationary calibration line positions a stat and a ref stat (two per arm) and the cooler voltage parameters (common to all four measurements).The final systematic uncertainty of about 0.16 eV from four correlated measurements, each with a systematic uncertainty of about 0.25 eV is because of the averaging procedure.If the four evaluations were independent, a reduction of a factor of √4 = 2 would be expected.Because of the use of the same calibration line for each arm (and other correlations), the uncertainty correlation reduces this factor to √2, which is approximately the value of a ratio between the single evaluation uncertainty and the final one as expected.The additional reduction of the final uncertainty is because of the smaller systematic uncertainty associated with the evaluation using Be-like U as a reference, because of the closer velocity for He-like and Be-like U beams and thus to the higher reduction of the uncertainty related to the observation angle evaluation.
A similar analysis treatment is applied for the relative energy evaluations.

MCDF calculation
The MCDF values reported here are obtained by MCDF calculations.For He-like U, double excitations up to 7i orbitals are included, using the sequence of configurations given in refs.60,61 to remove the unwanted ones.For Li-like uranium, it takes into account all singly, doubly and triply excited configurations up to 8k orbitals using the latest version of the MCDFGME code.For Be-like U, the highest excited orbital is 7i.The main quadruple excitations are added too.In all cases, the Breit interaction is treated self-consistently and higher-order retardation is included 62,63 .The mass shift correction is evaluated in a relativistic model following refs.64,65 as described in ref. 66.
The QED corrections with two and four vertices are included.The self-energy with a finite size correction 67,68 is included.The vacuum polarization at the Uehling approximation (order α(Zα)) is treated to all orders by inclusion in the Dirac equation 69 .The Wichmann and Kroll correction (order α(Zα) 3 ) and approximate higher-order corrections of order α(Zα) 5 and α(Zα) 7

Extended Data Table 4 | Details of the MCDF predictions
Contributions to the transition energies and their differences from the MDFGME code.Convergence errors correspond to the variation of the energy when the number of configurations increases.QED uncertainty includes uncertainty of the self-energy screening, and all known uncertainties due to other one-and two-loop contributions.The nuclear uncertainty contains contributions due to uncertainties of the nuclear size and of nuclear polarization.All values are in eV.

Fig. 1 |
Fig. 1 | Experimental setup.The two Bragg spectrometers (only the outer one is shown in the figure) are placed in proximity of the interaction point between the ion beam and the gas-jet target of the ESR.a, X-rays emitted at slightly different angles have different energy values because of the relativistic Doppler effect corresponding to different Bragg angles.This results in a slanted spectral line on the CCD (d).b, The placement of the retractable zinc fluorescence source is also shown together with the X-ray tube used for its activation.The corresponding second-order reflection spectral line has no slope.c, Sketch of the ESR indicating the position of the two spectrometers (adapted from ref. 46).d, Spectral lines detected by the outer spectrometer corresponding to the different intrashell transitions and the Zn Kα 1,2 fluorescence lines (bottom right).The horizontal axis (x-axis) corresponds to the dispersion axis proportional to the transition energy.All images are obtained with a binning of factor 8 of the original data.
γ and γ ref are the Lorentz form factors of the moving X-ray sources, and θ is the observation angle corresponding to the middle position on the CCD (y = y 0 ).Δa is the difference in the line position on the dispersion axis (x-axis) and D is the crystal-detector distance.n and n ref are the respective diffraction orders and the terms 1 − δ/sin 2 Θ are the correction due to the diffraction index n r = 1 + δ of the crystal.The observation angle θ is evaluated by letting E refer to the energies of the Li-like or Be-like intrashell transitions (with n = 1) and E ref to the energy of the zinc fluorescence line (with n ref = 2, β ref = 0 and γ ref = 1).

Fig. 2 |
Fig. 2 | Experimental and theoretical values for the intrashell transitions.a-c, Absolute energy of the He-like uranium transition (a), transition energy differences between He-like and Li-like (b) and Be-like and Li-like uranium ions (c).Also shown are past experiments 30,36 and several theoretical predictions (refs.12,30,40-45).The value for ref. 45 in b is obtained from the value differences in refs.43,45.Error bars denote ±1 standard deviation.The uncertainties of the measured values are also shown as grey bands.

Fig. 3 |
Fig. 3 | Experimental sensitivity to theoretical contributions.a-c, Theoretical contributions (from ref. 12) to the 1s 1/2 2p 3/2 J = 2 → 1s 1/2 2s 1/2 J = 1 intrashell transition energy in He-like uranium (a), to He-like and Li-like uranium transition energy difference (b) and to Be-like and Li-like U transition energy difference (c) in comparison with our experimental precision.For (b) and (c), the blue bar includes non-radiative QED contributions.Some of the corresponding Feynman diagrams are also represented (see also Extended Data Tables2 and 3).1e and 2e stand for one-electron and two-electron contributions, respectively.
in equation (1) is always evaluated with respect to the stationary reference line positions a stat and a ref stat systematically measured during the long data acquisition period required to determine a and a ref .The main systematic contribution comes from the Doppler correction to the energy of the moving calibration ions, which is equal to δE δE = are also taken into account.The self-energy screening correction is taken into account following the model operator from refs.70,71.The latest two-loop self-energy contributions from ref. 72, other two-loop corrections mixing self-energy and vacuum polarization 73-75 and the Kàllén and Sabry two-loop vacuum polarization are included.The finite size used is from ref. 76.The nuclear polarization from refs.77-79 is included too.Both latter contributions are very small when considering the transition energy differences between different charge states.The different contributions and associated uncertainties are given in Extended Data Table 4. Extended Data Fig. 1 | Experimental spectra and fits.Projection, with respect to the dispersion axis (x-axis in Fig. 1 proportional to the photon energy), of the spectral lines recorded by the outer spectrometer for the intrashell transition of He-like U (a), Li-like U (b) and Be-like U (c), and the Kα 1 line of zinc in second order reflection (d).The best fits to all transitions (solid lines) and the simulation of the He-like transition (dotted line) are also shown.One channel corresponds to 0.079 eV.Extended Data Fig. 2 | Details of the four measurements.He-like U intrashell transition energy evaluations obtained from different spectrometer arms and using different moving calibration.Statistical and total uncertainties are indicated with red and black error bars, respectively.Error bars denote ± 1 standard deviation.
Θ and Θ ref , but emitted from sources moving with different velocities, v and v ref , are considered, the relation between their energies, E and E ref , in the ion reference frame is given by

Table 2 | Measured values and comparisons for transition energies differences
Comparison of the measured intrashell transition energy differences with the most recent theoretical predictions.MCDF indicates the multi-configuration Dirac-Fock prediction.All values are in eV.Uncertainties correspond to ±1 standard deviation.