Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Core origin of seismic velocity anomalies at Earth’s core–mantle boundary


Seismic studies have found fine-scale anomalies at the core–mantle boundary (CMB), such as ultralow velocity zones (ULVZs)1,2 and the core rigidity zone3,4. ULVZs have been attributed to mantle-related processes5,6,7,8,9,10, but little is known about a possible core origin. The precipitation of light elements in the outer core has been proposed to explain the core rigidity zone3, but it remains unclear what processes can lead to such precipitation. Despite its importance for the outer core11, the melting behaviour of Fe–Si–H at relevant pressure–temperature conditions is not well understood. Here we report observations of the crystallization of B2 FeSi from Fe–9wt%Si melted in the presence of hydrogen up to 125 GPa and 3,700 K by using laser-heated diamond anvil cells. Hydrogen dramatically increases the Si concentration in the B2 crystals to a molar ratio of Si:Fe ≈ 1, whereas it mostly remains in the coexisting Fe liquid. The high Si content in the B2 phase makes it stable in a solid form at the outermost core temperatures and less dense than the surrounding liquids. Consequently, the Si-rich crystallites could form, float and be sedimented to the underside of the CMB interface, and that well explains the core side rigidity anomalies3,4. If a small amount of the FeSi crystals can be incorporated into the mantle, they would form dense low-velocity structures above the CMB, which may account for some ULVZs10. The B2 FeSi precipitation promoted by H in the outermost core provides a single core-driven origin for two types of anomalies at the CMB. Such a scenario could also explain the core-like tungsten isotope signatures in ocean island basalts12, after the materials equilibrated with the precipitates are entrained to the uppermost mantle by the mantle plumes connected to ULVZs.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: XRD patterns of the melting products of Fe–9wt%Si in the presence of H.
Fig. 2: Characterization of the thermally quenched samples.
Fig. 3: Crystallization of B2 FeSi from the Fe–Si–H system at high PT.
Fig. 4: A schematic diagram for the origin of the seismologically observed velocity anomalies at the CMB.

Similar content being viewed by others

Data availability

Datasets supporting the findings of this research have been deposited online at Source data are also provided with this paper as Extended Data Tables. Any additional data are available upon request. 


  1. Garnero, E. J., Helmberger, D. V. & Grand, S. P. Constraining outermost core velocity with SmKS waves. Geophys. Res. Lett. 20, 2463–2466 (1993).

    Article  ADS  Google Scholar 

  2. Yu, S. & Garnero, E. J. Ultralow velocity zone locations: a global assessment. Geochem. Geophys. Geosystems 19, 396–414 (2018).

    Article  ADS  Google Scholar 

  3. Rost, S. & Revenaugh, J. Seismic detection of rigid zones at the top of the core. Science 294, 1911–1914 (2001).

    Article  ADS  CAS  PubMed  Google Scholar 

  4. Thorne, M. S. & Garnero, E. J. Inferences on ultralow-velocity zone structure from a global analysis of SPdKS waves. J. Geophys. Res. Solid Earth 109, B08301 (2004).

    Article  ADS  Google Scholar 

  5. Knittle, E. & Jeanloz, R. Earth’s core-mantle boundary: results of experiments at high pressures and temperatures. Science 251, 1438–1443 (1991).

    Article  ADS  CAS  PubMed  Google Scholar 

  6. Dobson, D. P. & Brodholt, J. P. Subducted banded iron formations as a source of ultralow-velocity zones at the core–mantle boundary. Nature 434, 371–374 (2005).

    Article  ADS  CAS  PubMed  Google Scholar 

  7. Mao, W. L. et al. Iron-rich post-perovskite and the origin of ultralow-velocity zones. Science 312, 564–565 (2006).

    Article  ADS  CAS  PubMed  Google Scholar 

  8. Wicks, J. K., Jackson, J. M., Sturhahn, W. & Zhang, D. Sound velocity and density of magnesiowüstites: implications for ultralow-velocity zone topography. Geophys. Res. Lett. 44, 2148–2158 (2017).

    Article  ADS  CAS  Google Scholar 

  9. Liu, J. et al. Hydrogen-bearing iron peroxide and the origin of ultralow-velocity zones. Nature 551, 494–497 (2017).

    Article  ADS  CAS  PubMed  Google Scholar 

  10. Mergner, V. et al. Sound velocities in FeSi at lower mantle conditions and the origin of ultralowvelocity zones. Geophys. Res. Lett. 48, e2020GL092257 (2021).

    Article  ADS  CAS  Google Scholar 

  11. Hirose, K., Wood, B. J. & Vočadlo, L. Light elements in the Earth’s core. Nat. Rev. Earth Environ. 2, 645–658 (2021).

    Article  CAS  Google Scholar 

  12. Mundl-Petermeier, A. et al. Anomalous 182W in high 3He/4He ocean island basalts: fingerprints of Earth’s core? Geochim. Cosmochim. Acta 271, 194–211 (2020).

    Article  ADS  CAS  Google Scholar 

  13. Williams, Q. & Garnero, E. J. Seismic evidence for partial melt at the base of Earth’s mantle. Science 273, 1528–1530 (1996).

    Article  ADS  CAS  Google Scholar 

  14. Buffett, B. A. Earth’s core and the geodynamo. Science 288, 2007–2012 (2000).

    Article  ADS  CAS  PubMed  Google Scholar 

  15. McDonough, W. F. & Sun, S.-S. The composition of the Earth. Chem. Geol. 120, 223–253 (1995).

    Article  ADS  CAS  Google Scholar 

  16. Fischer, R. A. et al. Equations of state in the Fe-FeSi system at high pressures and temperatures. J. Geophys. Res. Solid Earth 119, 2810–2827 (2014).

    Article  ADS  CAS  Google Scholar 

  17. Pépin, C. M., Dewaele, A., Geneste, G., Loubeyre, P. & Mezouar, M. New iron hydrides under high pressure. Phys. Rev. Lett. 113, 265504 (2014).

    Article  ADS  PubMed  Google Scholar 

  18. Tagawa, S. et al. Experimental evidence for hydrogen incorporation into Earth’s core. Nat. Commun. 12, 1–8 (2021).

    Article  Google Scholar 

  19. Tagawa, S., Ohta, K., Hirose, K., Kato, C. & Ohishi, Y. Compression of Fe–Si–H alloys to core pressures. Geophys. Res. Lett. 43, 3686–3692 (2016).

    Article  ADS  CAS  Google Scholar 

  20. Fu, S., Chariton, S., Prakapenka, V. B., Chizmeshya, A. & Shim, S.-H. Hydrogen solubility in FeSi alloy phases at high pressures and temperatures. Am. Mineral. J. Earth Planet. Mater. 107, 2307–2314 (2022).

    Article  Google Scholar 

  21. Fu, S., Chariton, S., Prakapenka, V. B., Chizmeshya, A. & Shim, S.-H. Stable hexagonal ternary alloy phase in Fe-Si-H at 28.6–42.2 GPa and 3000 K. Phys. Rev. B 105, 104111 (2022).

    Article  ADS  CAS  Google Scholar 

  22. Hikosaka, K. et al. Melting phase relations in Fe–Si–H at high pressure and implications for Earth’s inner core crystallization. Sci. Rep. 12, 10000 (2022).

    Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

  23. Ji, C. et al. Stability of Ar(H2)2 to 358 GPa. Proc. Natl Acad. Sci. USA 114, 3596–3600 (2017).

    Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

  24. Kato, C. et al. Stability of fcc phase FeH to 137 GPa. Am. Mineral.105, 917–921 (2020).

    Article  ADS  Google Scholar 

  25. Hirao, N., Kondo, T., Ohtani, E., Takemura, K. & Kikegawa, T. Compression of iron hydride to 80 GPa and hydrogen in the Earth’s inner core. Geophys. Res. Lett. 31, L06616 (2004).

    Article  ADS  Google Scholar 

  26. Thompson, E. et al. High-pressure geophysical properties of fcc phase FeHx. Geochem. Geophys. Geosystems 19, 305–314 (2018).

    Article  ADS  CAS  Google Scholar 

  27. Ozawa, H., Hirose, K., Yonemitsu, K. & Ohishi, Y. High-pressure melting experiments on Fe–Si alloys and implications for silicon as a light element in the core. Earth Planet. Sci. Lett. 456, 47–54 (2016).

    Article  ADS  CAS  Google Scholar 

  28. Campbell, A. J., Seagle, C. T., Heinz, D. L., Shen, G. & Prakapenka, V. B. Partial melting in the iron–sulfur system at high pressure: a synchrotron X-ray diffraction study. Phys. Earth Planet. Inter. 162, 119–128 (2007).

    Article  ADS  CAS  Google Scholar 

  29. Lord, O. T., Walter, M. J., Dobson, D. P., Armstrong, L., Clark, S. M. & Kleppe, A. FeSi phase diagram to 150 GPa. J. Geophys. Res. 115, B06208 (2010).

    Article  ADS  Google Scholar 

  30. Anzellini, S., Dewaele, A., Mezouar, M., Loubeyre, P. & Morard, G. Melting of iron at Earth’s inner core boundary based on fast X-ray diffraction. Science 340, 464–466 (2013).

    Article  ADS  CAS  PubMed  Google Scholar 

  31. Hirose, K. et al. Hydrogen limits carbon in liquid iron. Geophys. Res. Lett. 46, 5190–5197 (2019).

    Article  ADS  CAS  Google Scholar 

  32. Edmund, E. et al. The Fe-FeSi phase diagram at Mercury’s core conditions. Nat. Commun. 13, 1–9 (2022).

    Article  Google Scholar 

  33. Morard, G. et al. Fe–FeO and Fe–Fe3C melting relations at Earth’s core–mantle boundary conditions: implications for a volatile-rich or oxygen-rich core. Earth Planet. Sci. Lett. 473, 94–103 (2017).

    Article  ADS  CAS  Google Scholar 

  34. Davies, C., Pozzo, M., Gubbins, D. & Alfe, D. Constraints from material properties on the dynamics and evolution of Earth’s core. Nat. Geosci. 8, 678–685 (2015).

    Article  ADS  CAS  Google Scholar 

  35. Nakagawa, T. & Tackley, P. J. Influence of initial CMB temperature and other parameters on the thermal evolution of Earth’s core resulting from thermochemical spherical mantle convection. Geochem. Geophys. Geosyst. 11, Q06001 (2010).

    Article  ADS  Google Scholar 

  36. Dewaele, A. et al. Quasihydrostatic equation of state of iron above 2 Mbar. Phys. Rev. Lett. 97, 215504 (2006).

    Article  ADS  PubMed  Google Scholar 

  37. Komabayashi, T. & Fei, Y. Internally consistent thermodynamic database for iron to the Earth’s core conditions. J. Geophys. Res. 115, B03202 (2010).

    Article  ADS  Google Scholar 

  38. Dziewonski, A. M. & Anderson, D. L. Preliminary reference Earth model. Phys. Earth Planet. Inter. 25, 297–356 (1981).

    Article  ADS  Google Scholar 

  39. Hernlund, J. W. & Jellinek, A. M. Dynamics and structure of a stirred partially molten ultralowvelocity zone. Earth Planet. Sci. Lett. 296, 1–8 (2010).

    Article  ADS  CAS  Google Scholar 

  40. Li, M., McNamara, A. K., Garnero, E. J. & Yu, S. Compositionally-distinct ultra-low velocity zones on Earth’s core-mantle boundary. Nat. Commun. 8, 1–9 (2017).

    Google Scholar 

  41. Ye, Y., Shim, S.-H., Prakapenka, V. & Meng, Y. Equation of state of solid Ne inter-calibrated with the MgO, Au, Pt, NaCl-B2, and ruby pressure scales up to 130 GPa. High Press. Res. 38, 377–395 (2018).

    Article  ADS  CAS  Google Scholar 

  42. Shen, G. et al. Toward an international practical pressure scale: a proposal for an IPPS ruby gauge (IPPS-Ruby2020). High Press. Res. 40, 299–314 (2020).

    Article  ADS  Google Scholar 

  43. Goncharov, A. F. et al. X-ray diffraction in the pulsed laser heated diamond anvil cell. Rev. Sci. Instrum. 81, 113902 (2010).

    Article  ADS  PubMed  Google Scholar 

  44. Prakapenka, V. et al. Advanced flat top laser heating system for high pressure research at GSECARS: application to the melting behavior of germanium. High Press. Res. 28, 225–235 (2008).

    Article  ADS  CAS  Google Scholar 

  45. Prescher, C. & Prakapenka, V. B. DIOPTAS: a program for reduction of two-dimensional X-ray diffraction data and data exploration. High Press. Res. 35, 223–230 (2015).

    Article  ADS  CAS  Google Scholar 

  46. Shim, S.-H. PeakPo - a python software for X-ray diffraction analysis at high pressure and high temperature v.7.2.2. Zenodo (2017).

  47. Shim, S.-H. Pytheos - a python tool set for equations of state pytheos - a python tool set for equations of state. Zenodo (2017).

  48. Dorogokupets, P., Dymshits, A., Litasov, K. & Sokolova, T. Thermodynamics and equations of state of iron to 350 GPa and 6000 K. Sci. Rep. 7, 41863 (2017).

    Article  ADS  CAS  PubMed  PubMed Central  Google Scholar 

  49. Yokoo, S. et al. Composition-dependent thermal equation of state of B2 Fe-Si alloys at high pressure. Am. Mineral. (in the press).

  50. Tateno, S., Kuwayama, Y., Hirose, K. & Ohishi, Y. The structure of Fe–Si alloy in Earth’s inner core. Earth Planet. Sci. Lett. 418, 11–19 (2015).

    Article  ADS  CAS  Google Scholar 

  51. Andrault, D. et al. Melting diagrams of Fe-rich alloys determined from synchrotron in situ measurements in the 15–23 GPa pressure range. Phys. Earth Planet. Inter. 174, 181–191 (2009).

    Article  ADS  CAS  Google Scholar 

  52. Kuwayama, Y. & Hirose, K. Phase relations in the system Fe-FeSi at 21 GPa. Am. Mineral. 89, 273–276 (2004).

    Article  ADS  CAS  Google Scholar 

Download references


We thank E. J. Garnero and M. Li for their discussion. This work is supported by the NSF-Astronomical Science (AST200567) and the NSF-Earth Science (EAR1921298). We acknowledge the support of GeoSoilEnviroCARS (University of Chicago, Sector 13) for the synchrotron experiments. GeoSoilEnviroCARS was supported by the National Science Foundation—Earth Sciences (EAR-1634415). This research used resources of the Advanced Photon Source, a US Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by the Argonne National Laboratory under contract no. DE-AC02-06CH11357.

Author information

Authors and Affiliations



S.F. and S.-H.S. conceived the project, S.F., S.C., V.B.P. and S.-H.S. conducted the synchrotron experiments, S.F. analysed the results, and S.F. and S.-H.S. wrote the manuscript. All authors reviewed the manuscript.

Corresponding authors

Correspondence to Suyu Fu or Sang-Heon Shim.

Ethics declarations

Competing interests

The authors declare no competing interests.

Peer review

Peer review information

Nature thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data figures and tables

Extended Data Fig. 1 Schematic diagrams of the experimental setup used in this study.

Top and bottom figures show side and top views, respectively, of a DAC loaded with the Fe-9wt%Si alloy foil in the presence of H as a medium. Beveled diamonds with a 120-µm inner culet and 300-µm outer bevel were used for the experiments over 100 GPa. The initial thickness of the compressed foil is less than 7 µm. In this setup, the loaded H can penetrate the compressed sample foil and exist between the grain boundaries.

Extended Data Fig. 2 X-ray diffraction patterns measured before and during heating Fe-9wt%Si in a H-bearing medium at 72.2 GPa.

At temperatures below 1491 K, no melting was observed. At 2150 K, the Si-rich (a molar ratio of Si:Fe≈1) B2 phase appears. The vertical ticks indicate peak positions of the identified phases. The wavelength of incident X-ray beam is 0.3344 Å.

Extended Data Fig. 3 Pressure–temperature conditions of our experiments.

The solid and open circles represent pulsed and continuous heating runs, respectively. Melting curves of the related alloy phases are shown: Fe metal (black)30, Fe-Si alloys containing 7-22 wt% Si (olive)32, FeSi (shaded orange area)29, and FeH (red)31. The error bar is the representative uncertainty (1σ) for the experimental melting curves.

Extended Data Fig. 4 Representative X-ray diffraction patterns of Au loaded for a pressure standard.

We provided patterns measured before and after laser-heating the Fe-9wt%Si alloy in a H-bearing medium at 121.6 GPa. The Miller indices of Au were provided, and “Re” denotes weak peaks from the gasket. The gold was intentionally loaded near the gasket inside the sample chamber to avoid direct contact with the sample foil. Because of the setup, the grain is close to the gasket, which can result in detection of weak diffraction lines from the Re gasket. Au was not heated in our experiments. The Au diffraction peaks do not show any changes before and after heating the sample and we did not find any sign of hydrogenation of gold. The wavelength of the incident X-ray beam is 0.3344 Å.

Extended Data Fig. 5

Pressure-volume relationship of a cubic FeH3 and b the hcp phase observed after laser heating at 300 K. The red, black, and olive circles are from DACs 1, 2, and 3, respectively. The solid and open circles are measured volumes during compression and decompression, respectively. The FeH3 appeared only after heating above 100 GPa. Previous experimental data on pure FeH3 (P14)17 and H-free Fe-9wt%Si (T15)50 were plotted as solid lines for comparison. The dashed line in b is the best fit for the compression data of the hcp phase in DAC 3, which has a 4–5% higher volume than H-free Fe-9wt%Si (see Extended Data Table 2). Uncertainty is the 1σ standard deviation. Some errors are smaller than the size of the symbols.

Extended Data Fig. 6 Si content of the eutectic liquid in an Fe-FeSi binary.

The figure is revised from ref. 27. Data are from refs. 27,32,50,51,52. The large red arrow highlights that the Si content in the eutectic liquid composition of a H-free Fe-Si system decreases with pressure. The grey band shows the expected Si content for the Earth’s outer core. Errors represent 1σ standard deviations and are not shown when smaller than the symbols.

Extended Data Table 1 Experimental conditions of the DAC runs for Fe-9wt%Si in a H-bearing medium
Extended Data Table 2 Unit-cell volumes of the phases observed after laser heating at high pressures

Supplementary information

Source data

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Fu, S., Chariton, S., Prakapenka, V.B. et al. Core origin of seismic velocity anomalies at Earth’s core–mantle boundary. Nature 615, 646–651 (2023).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing