Abstract
Homo sapiens was present in northern Asia by around 40,000 years ago, having replaced archaic populations across Eurasia after episodes of earlier population expansions and interbreeding1,2,3,4. Cultural adaptations of the last Neanderthals, the Denisovans and the incoming populations of H. sapiens into Asia remain unknown1,5,6,7. Here we describe Xiamabei, a well-preserved, approximately 40,000-year-old archaeological site in northern China, which includes the earliest known ochre-processing feature in east Asia, a distinctive miniaturized lithic assemblage with bladelet-like tools bearing traces of hafting, and a bone tool. The cultural assembly of traits at Xiamabei is unique for Eastern Asia and does not correspond with those found at other archaeological site assemblages inhabited by archaic populations or those generally associated with the expansion of H. sapiens, such as the Initial Upper Palaeolithic8,9,10. The record of northern Asia supports a process of technological innovations and cultural diversification emerging in a period of hominin hybridization and admixture2,3,6,11.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Rent or buy this article
Prices vary by article type
from$1.95
to$39.95
Prices may be subject to local taxes which are calculated during checkout
Data availability
AMS 14C and OSL age data used in Fig. 2 are presented in Supplementary Tables C1, C3, respectively. The data from X-ray diffraction spectra, Raman spectra, high-temperature magnetic susceptibility measurements, and magnetic component analysis of coercivity distributions used in Extended Data Fig. 6 can be downloaded at https://doi.org/10.5061/dryad.9s4mw6mj0. Other data generated during this study are included in the Article, Extended Data and Supplementary Information, and/or are available from the corresponding author/s on reasonable request.
Code availability
CQL code for the Bayesian age model is provided in Supplementary Table C4
References
Bae, C. J., Douka, K. & Petraglia, M. On the origin of modern humans: Asian perspectives. Science 358, 1269–1269 (2017).
Fu, Q. et al. DNA analysis of an early modern human from Tianyuan Cave, China. Proc. Natl Acad. Sci. USA 110, 2223–2227 (2013).
Massilani, D. et al. Denisovan ancestry and population history of early East Asians. Science 370, 579–583 (2020).
Li, F., Bae, C. J., Ramsey, B., Chen, F. & Gao, X. Re-dating Zhoukoudian Upper Cave, northern China and its regional significance. J. Hum. Evol. 121, 170–177 (2018).
Timmermann, A. & Friedrich, T. Late Pleistocene climate drivers of early human migration. Nature 538, 92–95 (2016).
Kuhlwilm, M. I. et al. Ancient gene flow from early modern humans into Eastern Neanderthals. Nature 530, 429–433 (2016).
Bae, C. J. et al. Late Pleistocene human evolution in Eastern Asia behavioral perspectives. Curr. Anthropol. 58, 514–526 (2017).
Hajdinjak, M. et al. Initial Upper Palaeolithic humans in Europe had recent Neanderthal ancestry. Nature 592, 253–257 (2021).
Bar-Yosef, O. & Wang, Y. Palaeolithic Archaeology in China. Annu. Rev. Anthropol. 41, 319–335 (2012).
Li, F., Petraglia, M., Roberts, P. & Gao, X. The northern dispersal of early modern humans in eastern Eurasia. Chin. Sci. Bull. 65, 1699–1701 (2020).
Dennell, R., Martinón-Torres, M., de Castro, J. M. B. & Gao, X. A demographic history of late Pleistocene China. Quat. Int. 559, 4–13 (2020).
deMenocal, P. B. & Stringer, C. Climate and the peopling of the world. Nature 538, 49–50 (2016).
Harvati, K. et al. Apidima Cave fossils provide earliest evidence of Homo sapiens in Eurasia. Nature 571, 500–504 (2019).
Dennell, R. From Arabia to the Pacific: How Our Species Colonised Asia (Routledge, 2020).
Hovers, E., Ilani, S., Bar-Yosef, O. & Vandermeersch, B. An early case of color symbolism: ochre use by modern humans in Qafzeh Cave. Curr. Anthropol. 44, 491–522 (2003).
Watts, I. Red ochre, body painting, and language: interpreting the Blombos ochre. Cradle Lang. 2, 93–129 (2009).
Zipkin, A. M. Material Symbolism and Ochre Exploitation in Middle Stone Age East-Central Africa. Doctoral dissertation. The George Washington Univ. (2015).
Villa, P. et al. Border Cave and the beginning of the Later Stone Age in South Africa. Proc. Natl Acad. Sci. USA 109, 13208–13213 (2012).
Pargeter, J. & Shea, J. Going big versus going small: lithic miniaturization in hominin lithic technology. Evol. Anthropol. 28, 72–85 (2019).
Zwyns, N. et al. The northern route for human dispersal in central and Northeast Asia: new evidence from the site of Tolbor-16, Mongolia. Sci. Rep. 9, 11759 (2019).
Peng, F., Lin, S. C., Patania, I. & Levchenko, V. A chronological model for the Late Paleolithic at Shuidonggou Locality 2, North China. PLoS ONE 15, e023268 (2020).
Li, F. et al. The easternmost Middle Paleolithic (Mousterian) from Jinsitai Cave, North China. J. Hum. Evol. 114, 76–84 (2018).
Li, F. et al. Chronology and techno-typology of the Upper Palaeolithic sequence in the Shuidonggou area, northern China. J. World Prehistory 32, 111–141 (2019).
Yue, J. et al. Human adaptations during MIS 2: evidence from microblade industries of Northeast China. Palaeogeogr. Palaeoclimatol. Palaeoecol. 567, 110286 (2021).
Li, Z., Doyon, L., Li, H., Wang, Q. & d’Errico, F. Engraved bones from the archaic hominin site of Lingjing, Henan Province. Antiquity 93, 886–900 (2019).
Wei, Y., d’Errico, F., Vanhaeren, M., Peng, F. & Gao, X. A technological and morphological study of Late Paleolithic ostrich eggshell beads from Shuidonggou, North China. J. Archaeol. Sci. 85, 83–104 (2017).
Qu, T., Bar-Yosef, O., Wang, Y. & Wu, X. The Chinese Upper Paleolithic: geography, chronology, and techno-typology. J. Archaeol. Res. 21, 1–73 (2013).
Martí, A. P., Wei, Y., Gao, X., Chen, F. & d’Errico, F. The earliest evidence of coloured ornaments in China: the ochred ostrich eggshell beads from Shuidonggou Locality 2. J. Anthropol. Archaeol. 48, 102–113 (2017).
Guan, Y. et al. Microblade remains from the Xishahe site, North China and their implications for the origin of microblade technology in Northeast Asia. Quat. Int. 535, 38–47 (2020).
Pargeter, J. & Faith, T. J. Lithic miniaturization as adaptive strategy: a case study from Boomplaas Cave, South Africa. Archaeol. Anthrop. Sci. 12, 225 (2020).
Guo, Y. J. et al. Luminescence ages for three ‘Middle Paleolithic’ sites in the Nihewan Basin, northern China, and their archaeological and palaeoenvironmental implications. Quat. Res. 85, 456–470 (2016).
Yang, S., Deng, C., Zhu, R. & Petraglia, M. The Paleolithic in the Nihewan Basin, China: evolutionary history of an Early to Late Pleistocene record in Eastern Asia. Evol. Anthropol. 29, 125–142 (2020).
Scerri, E. et al. Did our species evolve in subdivided populations across Africa, and why does it matter? Trends Ecol. Evol. 33, 582–594 (2018).
Ramsey, B. C., Higham, T. & Leach, P. Towards high-precision AMS: progress and limitations. Radiocarbon 46, 17–24 (2004).
Brock, F., Higham, T., Ditchfield, P. & Ramsey, C. B. Current pretreatment methods for AMS radiocarbon dating at the Oxford Radiocarbon Accelerator Unit (ORAU). Radiocarbon 52, 103–112 (2010).
Reimer, P. et al. The IntCal20 Northern Hemisphere radiocarbon age calibration curve (0–55 cal kBP). Radiocarbon 62, 725–757 (2020).
Bronk, C. B. Bayesian analysis of radiocarbon dates. Radiocarbon 51, 337–360 (2009).
Huntley, D. J., Godfrey-Smith, D. I. & Thewalt, M. L. W. Optical dating of sediments. Nature 313, 105–107 (1985).
Duller, G. Distinguishing quartz and feldspar in single grain luminescence measurements. Radiat. Meas. 37, 161–165 (2003).
Rhodes, E. J. Optically stimulated luminescence dating of sediments over the past 200,000 years. Annu. Rev. Earth Planet. Sci. 39, 461–488 (2011).
Zhang, X. L. et al. The earliest human occupation of the high-altitude Tibetan Plateau 40 thousand to 30 thousand years ago. Science 362, 1049–1051 (2018).
Ge, J. Y. et al. Evidence from the Dayao Palaeolithic site, Inner Mongolia for human migration into arid northwest China during mid-Pleistocene interglacials. Quat. Res. 103, 113–129(2021)
Duller, G. Luminescence dating of Quaternary sediments: recent advances. J. Quat. Sci. 19, 183–192 (2004).
Aitken, M. J. Introduction to Optical Dating: The Dating of Quaternary Sediments by the Use of Photon-Stimulated Luminescence (Clarendon, 1998).
Ramsey, B. C. Deposition models for chronological records. Quat. Sci. Rev. 27, 42–60 (2008).
Ramsey, B. C. Bayesian analysis of radiocarbon dates. Radiocarbon 51, 337–360 (2009).
Ramsey, B. C. Dealing with outliers and offsets in radiocarbon dating. Radiocarbon 51, 1023–1045 (2009).
Ramsey, B. C. Bayesian Approaches to the Building of Archaeological Chronologies (CRC, 2015).
Ramsey, B. C. Methods for summarizing radiocarbon datasets. Radiocarbon 59, 1809–1833 (2017).
Adams, J. et al. in Non-Flint Raw Material Use in Prehistory: Old Prejudices and New Directions (eds Sternke, F. et al.) 43–66 (Archaeopress, 2009).
de Beaune, S. Pour une Archéologie du Geste: Broyer, Moudre, Piler, des Premiers Chasseurs aux Premiers Agriculteurs (CNRS Editions, 2000).
Rosso, D. E., Mart, Í. A. P. & d’Errico, F. Middle Stone Age ochre processing and behavioural complexity in the Horn of Africa: evidence from Porc-Epic Cave, Dire Dawa, Ethiopia. PLoS ONE 11, e0164793 (2016).
Hodgskiss, T. Identifying grinding, scoring and rubbing use-wear on experimental ochre pieces. J. Archaeol. Sci. 37, 3344–3358 (2010).
Rifkin, R. F. Processing ochre in the Middle Stone Age: testing the inference of prehistoric behaviours from actualistically derived experimental data. J. Anthropol. Archaeol. 31, 174–195 (2012).
Rosso, D. E., d’Errico, F. & Queffelec, A. Patterns of change and continuity in ochre use during the late Middle Stone Age of the Horn of Africa: the Porc-Epic Cave record. PLoS ONE 12, e0177298 (2017).
Lafuente, B., Downs, R. T., Yang, H. & Stone N. In Highlights in Mineralogical Crystallography (eds Armbruster, T. & Danisi, R. M.) 1–30 (W. De Gruyter, 2015) pp. 1–30.
Bassel, L. et al. Fluorescence-based knife-edge beam diameter measurement to characterize X-ray beam profiles in reflection geometry. Spectroc. Acta B 118, 98–101 (2016).
Dayet, L. et al. Manganese and iron oxide use at Combe-Grenal (Dordogne, France): a proxy for cultural change in Neanderthal communities. J. Archaeol. Sci. Rep. 25, 239–256 (2019).
Queffelec, A., d’Errico, F.& Vanhaeren, M. In Munibe Monographs 493–503 (Anthropology and Archaeology Series, 2017).
Lucas-Tooth, H. J. & Price, B. J. A mathematical method for the investigation of inter-element effects in X-ray fluorescence. Metallurgia 64, 149–152 (1961).
Anthony, J. W., Bideaux, R. A., Bladh, K. W. & Nichols, M. C. Handbook of Mineralogy (Mineral Data Publishing, 1990).
Hanesch, M. Raman spectroscopy of iron oxides and (oxy)hydroxides at low laser power and possible applications in environmental magnetic studies. Geophys. J. Int. 17, 941–948 (2009).
Li, J. H. et al. Micro-XRF study of the troodontid dinosaur Jianianhualong Tengi reveals new biological and taphonomical signals. At. Spectrosc. 42, 1–11 (2021).
Deng, C., Zhu, R., Jackson, M. J., Verosub, K. L. & Singer, M. J. Variability of the temperature-dependent susceptibility of the Holocene eolian deposits in the Chinese loess plateau: a pedogenesis indicator. Phys. Chem. Earth A 26, 873–878 (2001).
Dunlop, D. J. & Özdemir Ö. Rock Magnetism: Fundamentals and Frontiers (Cambridge Univ. Press, 1997).
Kruiver, P. P., Dekkers, M. J. & Heslop, D. Quantification of magnetic coercivity components by the analysis of acquisition curves of isothermal remanent magnetization. Earth Planet. Sci. Lett. 189, 269–276 (2001).
Jiang, Z. et al. Ferro and antiferromagnetism of ultrafine-grained hematite. Geochem. Geophys. Geosyst. 15, 2699–2712 (2014).
Özdemir, Ö. & Dunlop, D. J. Hysteresis and coercivity of hematite. J. Geophys. Res. Solid Earth 119, 2582–2594 (2014).
Roberts, A. P., Cui, Y. & Verosub, K. L. Wasp-waisted hysteresis loops: mineral magnetic characteristics and discrimination of components in mixed magnetic systems. J. Geophys. Res. 100, 17909–17924 (1995).
Yuan, J. et al. Rapid drift of the Tethyan Himalaya terrane before two-stage India–Asia collision. Natl Sci. Rev. 8, nwaa173 (2021).
Roberts, A. P. et al. Hematite (α‑Fe2O3) quantification in sedimentary magnetism: limitations of existing proxies and ways forward. Geosci. Lett. 7, 8 (2020).
Semenov, S. A. Prehistoric Technology. An Experimental Study of the Oldest Tools and Artefacts from Traces of Manufacture and Wear (Cory, Adams and Mackay, 1964).
Hayden, B. (ed.) Lithic Use-Wear Analysis (Academic, 1979).
Keeley, L. H. Experimental Determination of Stone Tools Uses: A Microwear Analysis (Univ. of Chicago Press, 1980).
Vaughan, P. C. Use-Wear Analysis of Flaked Stone Tools (Univ. of Arizona Press, 1985).
Knutsson, K. Patterns of Tools Use. Scanning Electron Microscopy of Experimental Quartz Tools (Societas Archaeologica Upsalensis, 1988).
González, J. E. & Ibáñez, J. J. Metodología de Análisis Funcional de Instrumentos Tallados en Sílex (Univ. de Deusto, 1994).
Levi Sala, I. A Study of Microscopic Polish on Flint Implements (Tempus Reparatum, 1996). BAR IS629.
Marreiros, J. M., Gibaja Bao, J. F. & Ferreira Bicho, N. Use-Wear and Residue Analysis in Archaeology (Springer, 2015).
Stemp, W. J., Watson, A. S. & Evans, A. A. Surface analysis of stone and bone tools. Surf. Topogr. Metrol. Prop. 4, 13001 (2016).
Ollé, A. & Vergès, J. M. SEM functional analysis and the mechanism of microwear formation. In Proc. International Congress Verona (eds Longon, L. & Skakun, N.) 39–49 (Archaeopress, 2008).
Ollé, A. & Vergès, J. M. The use of sequential experiments and SEM in documenting stone tool microwear. J. Archaeol. Sci. 48, 60–72 (2014).
Fernández-Marchena, J. L. & Ollé, A. Microscopic analysis of technical and functional traces as a method for the use-wear analysis of rock crystal tools. Quat. Int. 424, 171–190 (2016).
Pedergnana, A. & Ollé, A. Monitoring and interpreting the use-wear formation processes on quartzite flakes through sequential experiments. Quat. Int. 427, 35–65 (2017).
Borel, A., Ollé, A., Vergès, J. M. & Sala, R. Scanning electron and optical light microscopy: two complementary approaches for the understanding and interpretation of usewear and residues on stone tools. J. Archaeol. Sci. 48, 46–59 (2014).
Ollé, A. et al. Microwear features on vein quartz, rock crystal and quartzite: a study combining optical light and scanning electron microscopy. Quat. Int. 424, 154–170 (2016).
Pedergnana, A., Ollé, A. & Evans, A. A. A new combined approach using confocal and scanning electron microscopy to image surface modifications on quartzite. J. Archaeol. Sci. Rep. 30, 102237 (2020).
Martín-Viveros, J. I. & Ollé, A. Use-wear and residue mapping on experimental chert tools. A multi-scalar approach combining digital 3D, optical, and scanning electron microscopy. J. Archaeol. Sci. Rep. 30, 102236 (2020).
Monnier, F., Ladwig, J. & Porter, L. S. T. Swept under the rug: the problem of unacknowledged ambiguity in lithic residue identification. J. Archaeol. Sci. 39, 3284–3300 (2012).
Pedergnana, A., Asryan, L., Fernández-Marchena, J. L. & Ollé, A. Modern contaminants affecting microscopic residue analysis on stone tools: a word of caution. Micron 86, 1–21 (2016).
Pedergnana, A. & Ollé, A. Building an experimental comparative reference collection for lithic micro-residue analysis based on a multi-analytical approach. J. Archaeol. Method Theory 25, 117–154 (2018).
Xhauflair, H. et al. Use-related or contamination? Residue and use-wear mapping on stone tools used for experimental processing of plants from Southeast Asia. Quat. Int. 427, 80–93 (2017).
Martín-Viveros, J. I. & Ollé, A. Using 3D digital microscopy and SEM–EDX for in-situ residue analysis: a multi-analytical contextual approach on experimental stone tools. Quat. Int. 569–570, 228–262 (2020).
Hayes, E., Cnuts, D. & Rots, V. Integrating SEM–EDS in a sequential residue analysis protocol: benefits and challenges. J. Archaeol. Sci. Rep. 23, 116–126 (2019).
Ollé, A. Variabilitat i Patrons Funcionals en els Sistemes Tècnics de Mode 2. Anàlisi de les Deformacions d’ús en els Conjunts Lítics del Riparo Esterno de Grotta Paglicci (Rignano Garganico, Foggia), Áridos (Arganda, Madrid) i Galería-TN (Sierra de Atapuerca, Burgos). Thesis, Universitat Rovira i Virgili (2003).
Fernández-Marchena, J. L. et al. Rainbow in the dark. The identification of diagnostic projectile impact features on rock crystal. J. Archaeol. Sci. Rep. 31, 102315 (2020).
Martín-Viveros, J. I. et al. Use-wear analysis of a specific mobile toolkit from the Middle Palaeolithic site of Abric Romaní (Barcelona, Spain): a case study from level M. Archaeol. Anthropol. Sci. 12, 16 (2020).
Downs, R. T. The RRUFF Project: an integrated study of the chemistry, crystallography, Raman and infrared spectroscopy of minerals. In Program and Abstracts of the 19th General Meeting of the International Mineralogical Association in Kobe, Japan. 3–13 (2006).
Robertson, D. J. & France, D. E. Discrimination of remanence-carrying minerals in mixtures, using isothermal remanent magnetisation acquisition curves. Phys. Earth Planet. Inter. 82, 223–234 (1994).
Swanson-Hywel, N. L., Fairchild, L. M. & Slotznick, S. P. Primary and secondary red bed magnetization constrained by fluvial intraclasts. J. Geophys. Res. Solid Earth 124, 4276–4289 (2019).
Acknowledgements
We thank Y. Lefrais (IRAMAT-CRP2A, UMR 5060 CNRS) and F. Orange for assistance with SEM–EDS analyses; A. Queffelec (PACEA UMR 5199) and L. Geis (PACEA UMR 5199) for assistance with the EDXRF analyses and the 3D imaging; C. X. Zhang, B. Hu, M. L. Zhou, J. H. Li, Y. Liu, S. H. Yang, X. G. Li, Y. Chen, J. Yuan, Z. S. Shen, S. Zhang and Z. X. Jiang for assistance with the sediment analysis; B. Xu and Y. Li for discussions on dating results; and R. P. Tang and F. X. Huan for assistance with figure preparation. Financial support for this research was provided by the National Natural Science Foundation of China (41888101, 42177424, 41977380, 42072212 and 41690112), the Strategic Priority Research Program of Chinese Academy of Sciences (XDB26000000), the Key Research Program of the Institute of Geology and Geophysics, Chinese Academy of Sciences (IGGCAS-201905), the State Key Laboratory of Loess and Quaternary Geology, Institute of Earth Environment (SKLLQGZR2002), the Youth Innovation Promotion Association of Chinese Academy of Sciences (2020074), the Humboldt Foundation, and the Max Planck Society. A.O. was supported by the Spanish MICIU/Feder (PGC2018-093925-B-C32), the Catalan AGAUR (SGR2017-1040) and the Univ. Rovira i Virgili (2019-PFR-URV-91) in the context of a MICIN ‘María de Maeztu’ excellence accreditation (CEX2019-000945). D.E.R. was funded by the Fyssen Foundation, France, and the Juan de la Cierva-Formación Research Fellowship (FJC2018-035605-I; Ministerio de Ciencia e Innovación, Spain). F.d. was funded by the Research Council of Norway through its Centre of Excellence funding scheme (SFF Centre for Early Sapiens Behaviour–Sapien CE project number 262618), the ERC Synergy grant QUANTA (grant no. 951388), the Talents programme (Grant No. 191022-001) and the GPR Human Past of the University of Bordeaux Initiative of Excellence. K.D. received funding from the ERC under the European Union’s Horizon 2020 research and innovation programme, grant agreement 715069-FINDER-ERC-2016-STG.
Author information
Authors and Affiliations
Contributions
F.-G.W., S.-X.Y., C.-L.D., R.-X.Z., Z.-T.G., F.d. and M.P. obtained funding and initiated the project; F.-G.W., S.-X.Y., J.-Y.G., L.-Q.L., F.X., H.-Y.Y., Y.G. and W.-Y.L. conducted field excavation and site sampling; J.-Y.G., K.-L.Z., K.D. and C.-L.D. conducted stratigraphic and palaeoenvironmental studies; J.-Y.G. performed the OSL dating; K.D. performed the 14C dating; S.-X.Y., J.-P.Y., M.P. and A.O. analysed the stone artefacts; F.d., D.E.R., Y.G., S.-X.Y. and C.-L.D. analysed the ochre-processing artefacts and the sediment; and S.-X.Y., C.-L.D., F.d. and M.P. wrote the main text and supplementary materials with specialist contributions from the other authors.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature thanks Andrew Murray, Pamela Willoughby and the other, anonymous, reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
Extended Data Fig. 1 Bone tool from Layer 6.
a, Periosteal view of the shaft fragment. b, Close-up view of the distal area showing microflake scars, smoothing and striations. c, Scraping regularizing the edge close to the opposite end. The object is an elongated fragment of a long bone from a medium-sized mammal. The bone is in an excellent state of preservation, apart from a large notch and post-depositional chipping located on both sides and rare flaking of the periosteal surface, at places removing primary bone lamellae. The edge of the rounded end displays micro flake scars strongly worn by usewear. The adjacent surface is covered with groups of microscopic striations subparallel or oblique to the main axis of the object that fade in frequency away from the edge. The left edge of the opposite end, which is pointed in shape, has been regularized by scraping with a lithic tool so as to make the edges of the bone less sharp. The adjacent periosteal surface also bears longitudinal striations, due to scraping, as well as groups of short striations perpendicular to the major axis of the object. The marks present on the rounded end are consistent with the object being used as a scraper on a soft material, strewn with abrasive particles. The modifications on the opposite end were intended to facilitate hafting of the object or its gripping during work.
Extended Data Fig. 2 Ochre piece OP1.
a, Ochre piece OP1, numbers indicate the analyzed areas (zone 1: grey polished area; zone 2: purple granular area; zone 3: coarse-grained area; zone 4: blistered area). b, drawing of ochre piece OP1, grey areas represent flake scars. c–f, SEM images of ochre piece OP1 (zones 1 to 4 respectively): grey polished area (c); purple granular area (d); coarse-grained area (e); blistered area (f). g, µ-Raman spectra obtained from the analysis of zone 1 (grey polished area, spectrum 1) and zone 3 (coarse-grained area, spectrum 2) showing the presence of hematite (H) and quartz (Q). The hematite reference spectrum is indicated in red: RRUFF ID R11001398. OP1 (28 x 20 mm in size; 12,4 g in mass) is a fragment of a larger nodule showing a portion of the original curved outer surface and several flake scars. The outer surface features a cracked and pitted texture alternating compact (grey polished area, zone 1 in a) and granular zones (purple granular and coarse-grained areas, zones 2 and 3 respectively in a). The flake scars feature a homogeneously blistered structure partially hidden on one surface by a yellow and on another by a dark red coating (blistered area, zone 4 in a). The blisters are smoother on some surfaces. Differential alteration indicates different episodes of fragmentation, probably due to knapping.
Extended Data Fig. 3 Ochre piece OP2.
a, Ochre piece OP2, number indicates the area analyzed using SEM-EDS. b, c, SEM images of ochre piece OP2. d, µ-Raman spectrum obtained from the analysis of OP2 showing the presence of hematite (H), quartz (Q), and an undetermined manganese oxide (Und). The hematite reference spectrum is indicated in red: RRUFF ID R11001398. OP2 (11 x 8 mm in size; 0.6 g in mass) preserves at its base (at the bottom) a dark brown flat area representing the outer surface of an originally larger ochre lump of which OP2 is a small fragment. OP2 likely results from pounding that larger piece. More heterogeneous and porous than OP1, it bears no other evidence of deliberate modification.
Extended Data Fig. 4 Quartzite cobble (QC) and limestone slab (LS).
a, Views of the QC with indication of the area enlarged in b. b, Flat pitted area of the QC. c, Views of the LS with indication of the area enlarged in (d) and the area on which fragment OMF was retrieved (1). d, Smoothed area with diffused ochre stain. e, Residue OMF with indication of the area analysed using SEM-EDS (1). f, g, SEM images of sample OMF. h, µ-Raman spectrum obtained from sample OMF showing the presence of hematite (H) and an undetermined manganese oxide (Und). The hematite reference spectrum is indicated in red: RRUFF ID R11001398. The quartzite cobble (10 x 9 cm in size) bears pits consistent with grinding and pounding actions on a flat facet (a, b) and on a protuberant zone of the edge. No ochre residues were identified on the surface of the cobble, or on the sediment covering the piece before cleaning. The limestone slab (24 x 16 cm in size) bears smoothed areas on one flat face and one edge as well as a diffuse red stain on the latter (c, d). Sample OMF (e–g) was identified on the edge of the limestone slab that features a red stain (c, zone 1). However, since the smoothed surfaces of the artefact were found in direct contact with the red stain on the sediment (Fig. 3b), it is not clear whether the red residues come from the stained sediment or whether they result from a processing of ochre directly on the surface of the tool.
Extended Data Fig. 5 Anthropogenic modifications observed on ochre piece OP1.
a, squares indicate areas presented in c–g with same letters. b, grey areas represent surfaces that bear striations produced by grinding. Arrows indicate the direction of the grinding motions. c–e, g, striations observed on OP1. f, 3D reconstruction of an area showing striations. The outer surface of the nodule bears five adjacent areas, each covered by parallel striations produced by abrading the nodule on a grindstone with a to-and-from motion (a, b). OP1 contains inclusions of almost pure iron in a more granular matrix. Abrasion has differentially smoothed areas of different hardness with the harder remaining more prominent. The orientation of the striations slightly differs on each facet indicating changes in the direction of the movement and possibly different sessions of use. The latter hypothesis is supported by substantial differences in the size of the striations between modified areas suggesting abrasion on grindstones of different granulometry (c–g).
Extended Data Fig. 6 Sediment analyses.
Samples X1 and X2 come from the red stained area on which the ochre fragments OP1 and OP2, stone slab LS and quartzite cobble QC were found; and samples X3 and X6 were retrieved Layer 6 but at about 2 m far from the stained area (Supplementary Fig. G1). a, XRD spectra clearly showing that hematite is abundant in samples X1 and X2, and that it is not detected in samples X3 and X6. b, Raman spectra. Data of the reference hematite (CIT-2058) with RRUFF ID X050102 come from the RRUFF Project website (https://rruff.info/hematite/display=default/X050102), see also Anthony et al.61. c, High-temperature magnetic susceptibility measurements. Blue arrows represent the feature of partially-oxidized magnetite; and red arrows, of hematite. d, Magnetic component analysis of coercivity distributions calculated with the IRM-CLG program66. Green, purple, blue and red lines indicate the low-coercivity component (IRML), middle-coercivity component (IRMM), high-coercivity component (IRMH), and the sum of these components (sum), respectively. B1/2 is the field at which half of the saturation IRM (SIRM) is reached; and the dispersion parameter (DP) represents one standard deviation99. BL1/2, BM1/2 and BH1/2 represent B1/2 of the low-, middle- and high-coercivity component, respectively. DPL, DPM and DPH represent DP of the low-, middle- and high-coercivity component, respectively. The high-coercivity component (IRMH) with median acquisition field (BH1/2) of up to 575 mT is interpreted as single domain (SD) hematite, because the SD threshold grain size of hematite is considerably larger than 15 μm, and even up to 100 μm68. This kind of hematite grains with high coercivities up to several hundreds of mT is usually of detrital origin70,100. e, Fe element distribution via Micro-XRF imaging. The yellow arrows point to large (up to 150–200 μm) Fe-rich agglomerates, which probably contain a high proportion of hematite, whose presence is detected by XRD analyses (a), Raman spectroscopy (b) and mineral magnetic measurements (c, d).
Extended Data Fig. 7 Bladelet-like chert piece with a bone fragment attached (no. 129).
(1) mosaic of the ventral face showing the location of the bone (3D DM). (2–4) detail of the bone film adhering to a layer of calcium carbonate (3D DM, SEM-LFD and SEM BSD respectively). (5) detail of the bone imprint (SEM-LFD). (6) calcium carbonate layer sandwiched between the bone and the tool surface (SEM-BSD). (7) EDX spectrum from the bone film taken in the center of images 3 and 4. (8–10) plant fiber imprints, present on both edges at the proximal end, associated with some ochre particles (3D DM, SEM-LFD and SEM-BSD respectively).
Extended Data Fig. 8 Bladelet-like chert piece, dorsal face, use-wear after removing residues (no. 129).
(1) mosaic of the distal left portion (3D DM). (3, 4) edge micro-scarring covered by an invasive, grid-influenced plant polish produced by a whittling action (SEM-LFD). (5, 6) portion of the dorsal ridge with a well-developed polish, ploughed by transversal striations (SEM-LFD and OM 50x-lens).
Extended Data Fig. 9 Bladelet-like chert piece, ventral face, use-wear after removing residues (no. 129).
(1) central part of the active edge with micro-scarring and well-developed polish (SEM-LFD). (2) detail from image 1 (OM 10x-lens). (3–5) details of image 2 (ON 20x-lens, SEM-LFD and OM 50x-lens respectively); (6) mosaic of the distal portion (SEM-LFD). (7) detail of the area interpreted as the limit of the hafted area, with some binding scars and no polish. (8, 9) intensively polished areas covered with fine transverse striations (SEM LFD and SEM-BSD).
Extended Data Fig. 10 Map, site location, stratigraphy and archaeological site distributions.
a, distribution of MIS 3 sites in northern China (see Supplementary Table A1 for site names. The source of the map https://resources.arcgis.com/). b, field view of Xiamabei. c, view of the excavated section. d, archaeological site distributions. Key features include a red stained patch with artefacts and a hearth and surrounding ashy area. Sediment samples for composition analysis within the excavation area are shown. Notable is the distribution of lithic artefacts and fauna, including the location of a bone tool. Stone tools submmited to use-wear analysis provide evidence for the following activities: hafting to handles; processing of vegetal material; involvement in butchery activities and hide working; perforation of hard material; use as wedges.
Supplementary information
Supplementary Information
This file contains supplementary text, Figures, Tables and references.
Rights and permissions
About this article
Cite this article
Wang, FG., Yang, SX., Ge, JY. et al. Innovative ochre processing and tool use in China 40,000 years ago. Nature 603, 284–289 (2022). https://doi.org/10.1038/s41586-022-04445-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41586-022-04445-2
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
