Abstract
To build a universal quantum computer from fragile physical qubits, effective implementation of quantum error correction (QEC)1 is an essential requirement and a central challenge. Existing demonstrations of QEC are based on an active schedule of error-syndrome measurements and adaptive recovery operations2,3,4,5,6,7 that are hardware intensive and prone to introducing and propagating errors. In principle, QEC can be realized autonomously and continuously by tailoring dissipation within the quantum system1,8,9,10,11,12,13,14, but so far it has remained challenging to achieve the specific form of dissipation required to counter the most prominent errors in a physical platform. Here we encode a logical qubit in Schrödinger cat-like multiphoton states15 of a superconducting cavity, and demonstrate a corrective dissipation process that stabilizes an error-syndrome operator: the photon number parity. Implemented with continuous-wave control fields only, this passive protocol protects the quantum information by autonomously correcting single-photon-loss errors and boosts the coherence time of the bosonic qubit by over a factor of two. Notably, QEC is realized in a modest hardware setup with neither high-fidelity readout nor fast digital feedback, in contrast to the technological sophistication required for prior QEC demonstrations. Compatible with additional phase-stabilization and fault-tolerant techniques16,17,18, our experiment suggests quantum dissipation engineering as a resource-efficient alternative or supplement to active QEC in future quantum computing architectures.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on SpringerLink
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
Data used in this work is available on reasonable request.
Code availability
Code used in this work is available on reasonable request.
References
Lidar, D. A. & Brun, T. A. (eds) Quantum Error Correction 1st edn (Cambridge Univ. Press, 2013).
Schindler, P. et al. Experimental repetitive quantum error correction. Science 332, 1059–1061 (2011).
Cramer, J. et al. Repeated quantum error correction on a continuously encoded qubit by real-time feedback. Nat. Commun. 7, 11526 (2016).
Kelly, J. et al. State preservation by repetitive error detection in a superconducting quantum circuit. Nature 519, 66–69 (2015).
Ofek, N. et al. Extending the lifetime of a quantum bit with error correction in superconducting circuits. Nature 536, 441–445 (2016).
Hu, L. et al. Quantum error correction and universal gate set operation on a binomial bosonic logical qubit. Nat. Phys. 15, 503–508 (2019).
Andersen, C. K. et al. Repeated quantum error detection in a surface code. Nat. Phys. 16, 875–880 (2020).
Ahn, C., Doherty, A. C. & Landahl, A. J. Continuous quantum error correction via quantum feedback control. Phys. Rev. A 65, 042301 (2002).
Atalaya, J. et al. Continuous quantum error correction for evolution under time-dependent Hamiltonians. Preprint at https://arxiv.org/abs/2003.11248 (2020).
Kerckhoff, J., Nurdin, H. I., Pavlichin, D. S. & Mabuchi, H. Designing quantum memories with embedded control: photonic circuits for autonomous quantum error correction. Phys. Rev. Lett. 105, 040502 (2010).
Kapit, E. Hardware-efficient and fully autonomous quantum error correction in superconducting circuits. Phys. Rev. Lett. 116, 150501 (2016).
Reiter, F., Sørensen, A. S., Zoller, P. & Muschik, C. A. Dissipative quantum error correction and application to quantum sensing with trapped ions. Nat. Commun. 8, 1822 (2017).
Albert, V. V. et al. Pair-cat codes: autonomous error-correction with low-order nonlinearity. Quant.Sci. Technol. 4, 035007 (2019).
Sarovar, M. & Milburn, G. J. Continuous quantum error correction by cooling. Phys. Rev. A 72, 012306 (2005).
Brune, M. et al. Observing the progressive decoherence of the “meter” in a quantum measurement. Phys. Rev. Lett. 77, 4887–4890 (1996).
Mundhada, S. et al. Experimental implementation of a Raman-assisted eight-wave mixing process. Phys. Rev. Appl. 12, 054051 (2019).
Reinhold, P. et al. Error-corrected gates on an encoded qubit. Nat. Phys. 16, 822–826 (2020).
Ma, Y. et al. Error-transparent operations on a logical qubit protected by quantum error correction. Nat. Phys. 16, 827–831 (2020).
Knill, E. & Laflamme, R. Theory of quantum error-correcting codes. Phys. Rev. A 55, 900–911 (1997).
Lihm, J.-M., Noh, K. & Fischer, U. R. Implementation-independent sufficient condition of the Knill-Laflamme type for the autonomous protection of logical qudits by strong engineered dissipation. Phys. Rev. A 98, 012317 (2018).
Poyatos, J. F., Cirac, J. I. & Zoller, P. Quantum reservoir engineering with laser cooled trapped ions. Phys. Rev. Lett. 77, 4728–4731 (1996).
Krauter, H. et al. Entanglement generated by dissipation and steady state entanglement of two macroscopic objects. Phys. Rev. Lett. 107, 080503 (2011).
Barreiro, J. T. et al. An open-system quantum simulator with trapped ions. Nature 470, 486–491 (2011).
Kienzler, D. et al. Quantum harmonic oscillator state synthesis by reservoir engineering. Science 347, 53–56 (2015).
Leghtas, Z. et al. Confining the state of light to a quantum manifold by engineered two-photon loss. Science 347, 853–857 (2015).
Lescanne, R. et al. Exponential suppression of bit-flips in a qubit encoded in an oscillator. Nat. Phys. 16, 509–513 (2020).
Koch, J. et al. Charge-insensitive qubit design derived from the Cooper pair box. Phys. Rev. A 76, 042319 (2007).
Reagor, M. et al. A quantum memory with near-millisecond coherence in circuit QED. Phys. Rev. B 94, 014506 (2016).
Axline, C. et al. An architecture for integrating planar and 3D cQED devices. Appl. Phys. Lett. 109, 042601 (2016).
Chuang, I. L., Leung, D. W. & Yamamoto, Y. Bosonic quantum codes for amplitude damping. Phys. Rev. A 56, 1114–1125 (1997).
Terhal, B. M., Conrad, J. & Vuillot, C. Towards scalable bosonic quantum error correction. Quant.Sci. Technol. 5, 043001 (2020).
Mirrahimi, M. et al. Dynamically protected cat-qubits: a new paradigm for universal quantum computation. New J. Phys. 16, 045014 (2014).
Cohen, J., Smith, W. C., Devoret, M. H. & Mirrahimi, M. Degeneracy-preserving quantum nondemolition measurement of parity-type observables for cat qubits. Phys. Rev. Lett. 119, 060503 (2017).
Pinotsi, D. & Imamoglu, A. Single photon absorption by a single quantum emitter. Phys. Rev. Lett. 100, 093603 (2008).
Macklin, C. et al. A near-quantum-limited Josephson traveling-wave parametric amplifier. Science 350, 307–310 (2015).
Schuster, D. I. et al. Resolving photon number states in a superconducting circuit. Nature 445, 515–518 (2007).
Vlastakis, B. et al. Deterministically encoding quantum information using 100-photon Schrödinger cat states. Science 342, 607–610 (2013).
Serniak, K. et al. Direct dispersive monitoring of charge parity in offset-charge-sensitive transmons. Phys. Rev. Appl. 12, 014052 (2019).
Jin, X. Y. et al. Thermal and residual excited-state population in a 3D transmon qubit. Phys. Rev. Lett. 114, 240501 (2015).
Grimm, A. et al. Stabilization and operation of a Kerr-cat qubit. Nature 584, 205–209 (2020).
Ma, W.-L. et al. Path-independent quantum gates with noisy ancilla. Phys. Rev. Lett. 125, 110503 (2020).
Puri, S. et al. Stabilized cat in a driven nonlinear cavity: a fault-tolerant error syndrome detector. Phys. Rev. X 9, 041009 (2019).
Douçot, B. & Ioffe, L. B. Physical implementation of protected qubits. Rep. Prog. Phys. 75, 072001 (2012).
Gyenis, A. et al. Experimental realization of an intrinsically error-protected superconducting qubit. Preprint at https://arxiv.org/abs/1910.07542 (2019).
Brown, B. J., Loss, D., Pachos, J. K., Self, C. N. & Wootton, J. R. Quantum memories at finite temperature. Rev. Mod. Phys. 88, 045005 (2016).
Heeres, R. W. et al. Implementing a universal gate set on a logical qubit encoded in an oscillator. Nat. Commun. 8, 94 (2017).
Grimsmo, A. L., Combes, J. & Baragiola, B. Q. Quantum computing with rotation-symmetric bosonic codes. Phys. Rev. X 10, 011058 (2020).
Leghtas, Z. et al. Hardware-efficient autonomous quantum memory protection. Phys. Rev. Lett. 111, 120501 (2013).
Susskind, L. & Glogower, J. Quantum mechanical phase and time operator. Phys. Phys. Fiz. 1, 49–61 (1964).
Michael, M. H. et al. New class of quantum error-correcting codes for a bosonic mode. Phys. Rev. X 6, 031006 (2016).
Wang, C. et al. A Schrödinger cat living in two boxes. Science 352, 1087–1091 (2016).
Nigg, S. E. et al. Black-box superconducting circuit quantization. Phys. Rev. Lett. 108, 240502 (2012).
Werschnik, J. & Gross, E. K. U. Quantum optimal control theory. J. Phys. At. Mol. Opt. Phys. 40, R175–R211 (2007).
Glaser, S. J. et al. Training Schrödinger’s cat: quantum optimal control. Eur. Phys. J. D 69, 279 (2015).
Gollub, C., Kowalewski, M. & de Vivie-Riedle, R. Monotonic convergent optimal control theory with strict limitations on the spectrum of optimized laser fields. Phys. Rev. Lett. 101, 073002 (2008).
Khaneja, N., Reiss, T., Kehlet, C., Schulte-Herbrüggen, T. & Glaser, S. J. Optimal control of coupled spin dynamics: design of NMR pulse sequences by gradient ascent algorithms. J. Magn. Reson. 172, 296–305 (2005).
Kirchmair, G. et al. Observation of quantum state collapse and revival due to the single-photon Kerr effect. Nature 495, 205–209 (2013).
Sun, L. et al. Tracking photon jumps with repeated quantum non-demolition parity measurements. Nature 511, 444–448 (2014).
Cahill, K. E. & Glauber, R. J. Density operators and quasiprobability distributions. Phys. Rev. 177, 1882–1902 (1969).
Acknowledgements
We thank MIT Lincoln Lab for providing the Josephson travelling wave parametric amplifier for our measurement. We thank D. Rosenstock, E. Dogan and X. Deng for assistance with the experiment. This research was supported by the US Air Force Office of Scientific Research (FA9550-18-1-0092) and the Army Research Office (W911NF-17-1-0469 and W911NF-19-1-0016).
Author information
Authors and Affiliations
Contributions
J.M.G. carried out the device design, microwave measurements, and data analysis of the experiment under the supervision of C.W. B.B. generated the numerical pulses for unitary control in the experiment under the supervision of J.K. J.L. fabricated the device and contributed to the cryogenic preparation of the apparatus. S.S. carried out numerical simulations for the experiment. B.B., J.K. and C.W. developed the approximate AQEC theory. C.W. conceived and oversaw this project. J.M.G., B.B., J.K. and C.W. wrote the manuscript with input from all authors.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature thanks Philippe Campagne-Ibarcq, Tom Stace and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
Extended Data Fig. 1 Dynamics and intrinsic performance of the approximate AQEC protocol.
a, Diagram illustrating the quantum-trajectory state \(|{\psi }_{j}^{15}(t)\rangle \) after a time period t under the combined effect of photon loss and instantaneous PReSPA, given a certain number j of jumps. The initial state is \(|\psi (0)\rangle =|{0}_{{\rm{L}}}\rangle \) in the subspace ℋ\({}_{15}={\rm{span}}\,\{|{u}_{0}\rangle ,|{u}_{1}\rangle \}\). Both jump and no-jump evolution lead to rotation of \(|{\psi }_{j}^{15}(t)\rangle \) over time within the subspace, and the angle \({\theta }_{j}(t)\) parametrizes this rotation. For each quantum trajectory, \(|{\psi }_{j}^{15}(t)\rangle \) slowly and continuously rotates clockwise in the absence of jumps and occasionally undergoes stochastic jumps counter-clockwise. The diagram and the dynamics for the states \(|{\psi }_{j}^{37}(t)\rangle \) in the ℋ\({}_{37}={\rm{span}}\,\{|{v}_{0}\rangle ,|{v}_{1}\rangle \}\) subspace (not shown) follows an analogous pattern. b, Comparing the decay of process fidelities for three cases: T4C encoding using the ideal PReSPA scheme of this section (corrected T4C code, green), T4C encoding without using PReSPA (uncorrected T4C code, teal), and Fock state encoding (uncorrected Fock \(|0\rangle \), \(|1\rangle \), blue). Experimental values of T1A and K are used, and cavity dephasing is not considered. Exponential curves for the T4C fidelity use the equation ℱ\({}_{{\rm{process}}}(t)=0.75{{\rm{e}}}^{-t/\tau }+0.25\) to extract decay rate τ.
Extended Data Fig. 2 PReSPA spectroscopy.
a, b, Control pulse sequence for two-dimensional spectroscopy to find the resonance conditions for the PReSPA mixing comb and transmon comb. We prepare an even-parity Fock state (\(|0\rangle \), \(|2\rangle \), \(|4\rangle \), or \(|6\rangle \)), apply PReSPA for a fixed time (12 μs) with varying detunings of the transmon comb (Δq) and the mixing comb (Δm) in an attempt to activate dissipative photon addition. After a 1 μs wait time for the reservoir to relax, we either selectively π-pulse the transmon conditioned on cavity A being in the targeted final state (\(|1\rangle \), \(|3\rangle \), \(|5\rangle \), or \(|7\rangle \)) (a) or skip this pulse (for a background measurement, b), and proceed to read out the transmon state. The difference between the two measurements informs the likelihood of successful photon addition. c, Two-dimensional PReSPA spectroscopy data: probability of photon addition (colour scale) as a function of the comb detunings (Δq and Δm) for the \(|0\rangle \) to \(|1\rangle \) transition. Note that the linewidth of the four-wave-mixing transition is an order of magnitude greater than that of the transmon excitation owing to the short reservoir T1R. We can repeat this procedure to find all four sets of transition frequencies. d, Cartoon spectrum of PReSPA drive frequencies. Four transmon drives, left, and four mixing drives, right, compose PReSPA. The coloured ticks indicate the actual transition frequencies whereas the vertical black bars show the microwave drive frequencies in PReSPA. The transmon drive for the \(|0\rangle \) to \(|1\rangle \) conversion process is approximately at the Stark-shifted transmon frequency, \({\omega }_{{\rm{q}}}-{\varDelta }_{{\rm{Stark}}}\), and the \(|0\rangle \) to \(|1\rangle \) mixing drive is near \({\omega }_{{\rm{A}}}+{\omega }_{{\rm{R}}}-{\omega }_{{\rm{q}}}+{\varDelta }_{{\rm{Stark}}}\). Because of the equal frequency spacing η in each comb and the unequal frequency spacing between the transitions with different photon numbers (owing to the 6th-order nonlinearity, \({\chi }_{{\rm{q}}}^{{\prime} }\)), not all drives can be placed exactly on resonance. Experimentally, we settle for η slightly greater than 2χq, and Δq = Δm slightly smaller than ΔStark to compensate for the effect of \({\chi }_{{\rm{q}}}^{{\prime} }\).
Extended Data Fig. 3 Cavity Wigner and PReSPA Ramsey measurements.
a, Experimental Wigner function W(α) (colour scale, dimensionless) of \(|{0}_{{\rm{L}}}\rangle \), acquired by applying a cavity displacement operation \({\hat{D}}_{\alpha }=\exp (\alpha {\hat{a}}^{\dagger }-{\alpha }^{\ast }\hat{a})\) with variable complex amplitude α followed by an ancilla-assisted photon-number-parity measurement (which is composed of two π/2 pulses of the ancilla and a delay time of π/χq and an ancilla readout37,58). The Wigner function rotates around the origin over time at a rate proportional to the frequency difference between \(|1\rangle \) and \(|5\rangle \) in the rotating frame of the experiment. b, Measured Wigner function values at a fixed phase-space position (as indicated by the cross in a, at α = 0.75) as a function of time under PReSPA. Analogous to a qubit Ramsey measurement, this cavity PReSPA Ramsey experiment can be used to efficiently track the phase evolution of any two-component superposition states using the interference effect enabled by the coherent cavity displacement (\({\hat{D}}_{\alpha }\)) before readout. The exponential envelope of the sinusoidal fit indicates the rate of decay for the coherence between \(|1\rangle \) and \(|5\rangle \) under the correction of PReSPA. Similar measurements are applied to various superposition states to provide direct calibration of the frequencies and phases of these states under PReSPA. PReSPA enhances the ability to use such Ramsey measurements at high photon numbers because it approximately preserves photon number distributions in the cavity.
Extended Data Fig. 4 Tracking AQEC performance over time.
a, We interleave measurements of the corrected logical qubits under two differently calibrated PReSPA parameter sets (PReSPA-1, red and PReSPA-2, blue) while also monitoring the cavity T2A. Each circle corresponds to the decay time of process fidelity extracted from measuring all six cardinal points of the logical Bloch sphere as described in Fig. 4. The decay rates for state fidelity are shown in triangles for the two logical pole states (upwards triangles) and the four equator states (downwards triangles). The state fidelity is measured by quantum state tomography of the ancilla after decoding the cavity state as described in the Methods. For ancilla state tomography, we measure all six Pauli operators (\({\hat{\sigma }}_{x}\), \({\hat{\sigma }}_{y}\), \({\hat{\sigma }}_{z}\), \(-{\hat{\sigma }}_{x}\), \(-{\hat{\sigma }}_{y}\), \(-{\hat{\sigma }}_{z}\)) by performing ancilla rotations before readout. The over-complete measurement set is used for simultaneous calibration of the readout signal contrast, allowing for accurate determination of the transmon state. PReSPA-1 is calibrated by adjusting control parameters to achieve matched PReSPA rates and zero conversion phases as discussed in the Methods. For PReSPA-2, we employ further empirical parameter optimization to maximize equator state lifetime as described in the Supplementary Information section 5. Cavity A has a two-state switching behaviour of unknown origin (see notes in Extended Data Table 1). For distinct stretches of 2−8 h, cavity A shows fluctuating and abnormally low T2A, and all data recorded during such periods (with example data shown in the shaded region) are excluded in all other parts of the paper. b, Process fidelity averaged over the data, excluding the shaded region, for both PReSPA 1 and 2. Data reported in Fig. 4d for the corrected T4C encoding is a duplication of the blue points here. c, Equator and pole state fidelity for the same time period for both PReSPA 1 and 2. Oscillatory behaviour in the data are caused by the numerical differences between the two decoding pulses discussed in Methods section ‘GRAPE methods’.
Extended Data Fig. 5 Predicted AQEC performance in numerical simulations.
The results are based on master-equation simulations of a T4C qubit (with encoding \(\bar{n}=3.4\) for both basis states) under the Hamiltonian equations (11) and (18), which captures the dynamics under the microwave combs of PReSPA. a, Gain factor (colour scale, dimensionless) of the corrected logical qubit lifetime over the physical photon lifetime (\({T}_{1{\rm{A}}}/\bar{n}\)) in the T4C encoding as a function of ancilla T1q, Tϕ (which are made equal for convenience) and cavity T1A. To illustrate the intrinsic performance of our transmon-based PReSPA pumping scheme, we have assumed no ancilla thermal excitations and other cavity dephasing errors. However, ancilla excitations due to the imperfect frequency selectivity of PReSPA, which is unrelated to photon loss, are reflected in the simulation. Therefore, the gain factor shown is different from the Gi defined in the main text, and decreases slightly at long T1A. b, The QEC break-even ratio (colour scale, dimensionless), defined as the T4C qubit lifetime under PReSPA over the lifetime of the 0/1 Fock-state encoding. Here we use a specific set of achievable coherence times T1A = 1 ms, T1q = Tq = 100 μs (refs. 46,51) and show the degradation of AQEC performance in the presence of spontaneous transmon excitation (\({\gamma }_{\uparrow }\)) errors caused by the stray thermal background (horizontal axis) or pump-tone-induced heating from PReSPA (vertical axis). QEC breakeven can be reached if the \({\gamma }_{\uparrow }\) rate is kept reasonably low. The dashed lines in both a and b indicate where the QEC break-even ratio equals 1. Relevant system parameters: In a, we use λ/2π = 17.5 kHz, Ω/2π = 45 kHz, κ/2π = 227 kHz, χq/2π = 1.05 MHz, χR/2π = 1.6 MHz, scaled from the experiment by 50%, 50%, 40%, 80%, 80% respectively. In b, we use λ/2π = 21.6 kHz, Ω/2π = 72 kHz, κ/2π = 364 kHz, χq/2π = 1.18 MHz, χR/2π = 1.8 MHz, scaled from the experiment by 80%, 80%, 64%, 90%, 90% respectively. The choice of parameters here is guided by the scaling laws of various error channels (Extended Data Table 3) but did not go through optimization of individual parameters.
Extended Data Fig. 6 Cavity heating effect caused by spurious transmon excitations.
a, Schematic mechanism of sequential two-photon gain triggered by spurious excitation of the transmon. Starting from \(|1g0\rangle \), following the transitions labelled with blue-circled numbers, the system is excited to \(|1e0\rangle \) by a transmon \({\gamma }_{\uparrow }\) jump, and then driven unintentionally to \(|2g1\rangle \) by mixing tones that are off-resonance by only \(\pm {\chi }_{{\rm{q}}}/2{\rm{\pi }}=\pm 1.3\,{\rm{M}}{\rm{H}}{\rm{z}}\) (which does not provide strong enough frequency selectivity relative to the reservoir linewidth κ/2π = 0.58 MHz), and then relaxes to \(|2g0\rangle \) following reservoir decay. Once a photon is added in this spurious odd-to-even conversion process, the PReSPA scheme by design will add a second photon, driving the system ultimately to \(|3g0\rangle \). Similarly, a transmon \({\gamma }_{\uparrow }\) jump can add two photons to \(|3\rangle \) and \(|5\rangle \) states (but not \(|7\rangle \)). b, Schematic illustration of the steady-state photon number distribution established between the ancilla-\({\gamma }_{\uparrow }\)-induced photon addition and the natural photon loss of the cavity. The figure corresponds to the configuration of the test experiment in d when only the mixing comb (but not the transmon excitation comb) is applied. c, Steady-state (\(t\to \infty \)) cavity photon number distribution under PReSPA, as probed by ancilla qubit spectroscopy. In this measurement, PReSPA is applied nearly at all times, only briefly interrupted by spectroscopy probes once every 2 ms. The peak amplitudes confirm that odd photon number parity is permanently stabilized, and also reveals the presence of spurious excitation processes in the cavity. d, Steady-state cavity photon number distribution when only the mixing comb of PReSPA is applied, as in b. Under this configuration, a transmon \({\gamma }_{\uparrow }\) jump may add just one spurious photon in the cavity, leading to an effective cavity heating rate out of its vacuum state \({\gamma }_{01}\approx {\gamma }_{\uparrow }\) (when the transmon decay rate through the reservoir \({\gamma }_{{\rm{m}}}\gg 1/{{\rm{T}}}_{1{\rm{q}}}\)). The relative probability of \(|0\rangle \) versus \(|1\rangle \) informs the balance between the cavity decay rate 1/T1A = 1.9 ms−1 and the heating rate \({\gamma }_{01}\). e, Blue triangles show the cavity heating rate \({\gamma }_{01}\), as measured with the technique described in d, as a function of the Rabi amplitude of a single \(|0e0\rangle \leftrightarrow |1g1\rangle \) mixing tone. \({\gamma }_{01}\) initially follows the expected values corresponding to transmon \({\gamma }_{\uparrow }\) = 1.4 ms−1 (green dashed curve), but additional heating effects due to the microwave pump is observed at higher four-wave mixing (FWM) rate, Ω.
Extended Data Fig. 7 Process χ matrix block for 25 μs of PReSPA.
The matrix converts elements of input density matrices (top axis) to output density matrix elements (left axis) expressed in the Fock state basis. a, Amplitude values of the χ matrix elements. The upper left block (\({\chi }_{nn,mm}\)) describes the conversion of diagonal elements of the input and output density matrices, which is associated with transfer of photon occupation probabilities calculated from transmon spectroscopy experiments (as in Fig. 2d, e). The lower right block (\({\chi }_{nm,kl}\)) describes the conversion of relevant off-diagonal elements of density matrices, which is calculated from Wigner tomography and density matrix reconstruction59 (as in Fig. 3). The greyed blocks are assumed to be zero owing to the absence of interference between the four conversion paths in PReSPA. b, Phase values of the χ matrix elements for the lower right block in a. For best illustration of the PReSPA process, the phases are reported in the full rotating frame where all Fock states have zero energy. Values in grey are measured but not statistically significant because the corresponding amplitude value is not large enough. In this frame, as prescribed by equation (2), PReSPA requires zero phase for the six \({\chi }_{nm,(n+1)(m+1)}\) elements representing the coherence of the even-to-odd conversion process, which is accomplished by our PReSPA calibration. The diagonal elements \({\chi }_{nm,nm}\) representing the preservation of odd-state superpositions should have zero phase by definition. Their systematic deviation from zero was caused by parameter drift in the experiment as that block of data was acquired at a later time than the earlier rotating frame calibration.
Supplementary information
Supplementary Information
This file contains Supplementary Information Sections 1–6, additional references and Supplementary Figs 1–2.
Rights and permissions
About this article
Cite this article
Gertler, J.M., Baker, B., Li, J. et al. Protecting a bosonic qubit with autonomous quantum error correction. Nature 590, 243–248 (2021). https://doi.org/10.1038/s41586-021-03257-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41586-021-03257-0
This article is cited by
-
Modulation of triplet quantum coherence by guest-induced structural changes in a flexible metal-organic framework
Nature Communications (2024)
-
Autonomous error correction of a single logical qubit using two transmons
Nature Communications (2024)
-
Autonomous stabilization with programmable stabilized state
Nature Communications (2024)
-
Resolving Fock states near the Kerr-free point of a superconducting resonator
npj Quantum Information (2023)
-
Autonomous quantum error correction and fault-tolerant quantum computation with squeezed cat qubits
npj Quantum Information (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
