Abstract
On 12 November 2014, the Philae lander descended towards comet 67P/Churyumov–Gerasimenko, bounced twice off the surface, then arrived under an overhanging cliff in the Abydos region. The landing process provided insights into the properties of a cometary nucleus1,2,3. Here we report an investigation of the previously undiscovered site of the second touchdown, where Philae spent almost two minutes of its cross-comet journey, producing four distinct surface contacts on two adjoining cometary boulders. It exposed primitive water ice—that is, water ice from the time of the comet’s formation 4.5 billion years ago—in their interiors while travelling through a crevice between the boulders. Our multi-instrument observations made 19 months later found that this water ice, mixed with ubiquitous dark organic-rich material, has a local dust/ice mass ratio of \({2.3}_{-0.16}^{+0.2}:1\), matching values previously observed in freshly exposed water ice from outbursts4 and water ice in shadow5,6. At the end of the crevice, Philae made a 0.25-metre-deep impression in the boulder ice, providing in situ measurements confirming that primitive ice has a very low compressive strength (less than 12 pascals, softer than freshly fallen light snow) and allowing a key estimation to be made of the porosity (75 ± 7 per cent) of the boulders’ icy interiors. Our results provide constraints for cometary landers seeking access to a volatile-rich ice sample.
This is a preview of subscription content, access via your institution
Access options
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 51 print issues and online access
$199.00 per year
only $3.90 per issue
Buy this article
- Purchase on Springer Link
- Instant access to full article PDF
Prices may be subject to local taxes which are calculated during checkout
Similar content being viewed by others
Data availability
All OSIRIS, VIRTIS, RPC-MAG and ROMAP calibrated data are publicly available through the European Space Agency’s Planetary Science Archive website (https://archives.esac.esa.int/psa/). The Supplementary Information contains additional supporting images, data and explanatory text with the aim of allowing readers to understand what we have done and how we have done it.
References
Biele, J. et al. The landing(s) of Philae and inferences about comet surface mechanical properties. Science 349, aaa9816 (2015).
Spohn, T. et al. Thermal and mechanical properties of the near-surface layers of comet 67P/Churyumov-Gerasimenko. Science 349, aab0464 (2015).
Kofman, W. et al. Properties of the 67P/Churyumov-Gerasimenko interior revealed by CONSERT radar. Science 349, aab0639 (2015).
Pajola, M. et al. The pristine interior of comet 67P revealed by the combined Aswan outburst and cliff collapse. Nat. Astron. 1, 0092 (2017).
Fornasier, S. et al. Surface evolution of the Anhur region on comet 67P/Churyumov-Gerasimenko from high-resolution OSIRIS images. Astron. Astrophys. 630, A13 (2019).
Oklay, N. et al. Long-term survival of surface water ice on comet 67P. Mon. Not. R. Astron. Soc. 469, S582–S597 (2017).
Oklay, N. et al. Comparative study of water ice exposures on cometary nuclei using multispectral imaging data. Mon. Not. R. Astron. Soc. 462, S394–S414 (2016).
Luccheti, A. et al. Characterization of the Abydos region through OSIRIS high-resolution images in support of CIVA measurements. Astron. Astrophys. 585, L1 (2016).
Keller, H. U. et al. Seasonal mass transfer on the nucleus of comet 67P/Churyumov-Gerasimenko. Mon. Not. R. Astron. Soc. 469 (Issue Suppl. 2), S357–S371 (2017).
Glassmeier, K. et al. The Rosetta mission: flying towards the origin of the Solar System. Space Sci. Rev. 128, 1–21 (2007).
Heinisch, P. et al. Compressive strength of comet 67P/Churyumov–Gerasimenko derived from Philae surface contacts. Astron. Astrophys. 630, A2 (2019).
Heinisch, P. et al. Reconstruction of the flight and attitude of Rosetta’s lander Philae. Acta Astronaut. 140, 509–516 (2017).
Auster, H. U. et al. ROMAP: Rosetta magnetometer and plasma monitor. Space Sci. Rev. 128, 221–240 (2007).
Keller, H. U. et al. OSIRIS — the scientific camera system onboard Rosetta. Space Sci. Rev. 128, 433–506 (2007).
Glassmeier, K. et al. RPC-MAG, the fluxgate magnetometer in the ROSETTA plasma consortium. Space Sci. Rev. 128, 649–670 (2007).
Auster, H. U. et al. The non-magnetic nucleus of comet 67P/Churyumov–Gerasimenko. Science 349, aaa5102 (2015).
Fornasier, S. et al. Rosetta’s comet 67P/Churyumov-Gerasimenko sheds its dusty mantle to reveal its icy nature. Science 354, 1566–1570 (2016).
Fulle, M. et al. The dust-to-ices ratio in comets and Kuiper belt objects. Mon. Not. R. Astron. Soc. 469, S45–S49 (2017).
Choukroun, M. et al. Dust-to-gas and refractory-to-ice mass ratios of comet 67P/Churyumov-Gerasimenko from Rosetta observations. Space Sci. Rev. 216, 44 (2020).
Deshapriya, J. D. P. Exposed bright features on the comet 67P/Churyumov–Gerasimenko: distribution and evolution. Astron. Astrophys. 613, A36 (2018).
Filacchione, G. et al. Exposed water ice on the nucleus of comet 67P/Churyumov-Gerasimenko. Nature 529, 368–372 (2016).
Sunshine, J. M. et al. Exposed water ice deposits on the surface of comet 9P/Tempel 1. Science 311, 1453–1455 (2006).
Groussin, O. et al. Gravitational slopes, geomorphology, and material strengths of the nucleus of comet 67P/Churyumov-Gerasimenko from OSIRIS observations. Astron. Astrophys. 583, A32 (2015).
Herique, A. et al. Homogeneity of 67P/Churyumov-Gerasimenko as seen by CONSERT: implication on composition and formation. Astron. Astrophys. 630, A6 (2019).
Pätzold, M. et al. A homogeneous nucleus for comet 67P/Churyumov–Gerasimenko from its gravity field. Nature 530, 63–65 (2016).
Fulle, M. et al. Comet 67P/Churyumov–Gerasimenko preserved the pebbles that formed planetesimals. Mon. Not. R. Astron. Soc. 462, S132–S137 (2016).
Blum, J. et al. The physics of protoplanetesimal dust agglomerates. I. Mechanical properties and relations to primitive bodies in the Solar System. Astrophys. J. 652, 1768–1781 (2006).
Mannel, T. et al. Dust of comet 67P/Churyumov-Gerasimenko collected by Rosetta/MIDAS: classification and extension to the nanometre scale. Astron. Astrophys. 630, A26 (2019).
Güttler, C. et al. Synthesis of the morphological description of cometary dust at comet 67P/Churyumov-Gerasimenko. Astron. Astrophys. 630, A24 (2019).
Lorek, S., Gundlach, B., Lacerda, P. & Blum, J. Comet formation in collapsing pebble clouds — what cometary bulk density implies for the cloud mass and dust-to-ice ratio. Astron. Astrophys. 587, A128 (2016).
Fulle, M. et al. How comets work: nucleus erosion versus dehydration. Mon. Not. R. Astron. Soc. 493, 4039–4044 (2020).
Gundlach, B., Fulle, M. & Blum, J. On the activity of comets: understanding the gas and dust emission from comet 67P/Churyumov-Gerasimenko’s south-pole region during perihelion. Mon. Not. R. Astron. Soc. 493, 3690–3715 (2020).
Bockelée-Morvan, D. et al. AMBITION–Comet Nucleus Cryogenic Sample Return. https://www.cosmos.esa.int/web/voyage-2050/white-papers (ESA, 2019).
Veverka, J. Cryogenic Comet Nucleus Sample Return (CNSR) Mission Technology Study. Report SDO-12367 https://solarsystem.nasa.gov/studies/228/cryogenic-comet-nucleus-sample-return-cnsr-mission-technology-study (NASA, 2017).
Jorda, L. et al. The global shape, density and rotation of 67P/Churyumov-Gerasimenko from pre-perihelion Rosetta/OSIRIS observations. Icarus 277, 257–278 (2016).
Hapke, B. et al. Bidirectional reflectance spectroscopy. 5. The coherent backscatter opposition effect and anisotropic scattering. Icarus 157, 523–534 (2002).
Fornasier, S. et al. Spectrophotometric properties of the nucleus of comet 67P/Churyumov-Gerasimenko from the OSIRIS instrument onboard the ROSETTA spacecraft. Astron. Astrophys. 583, A30 (2015).
Warren, S. G. & Brandt, R. E. Optical constants of ice from the ultraviolet to the microwave: a revised compilation. J. Geophys. Res. 113, D14220 (2008).
Capaccioni, F. et al. The organic-rich surface of comet 67P/Churyumov-Gerasimenko as seen by VIRTIS/Rosetta. Science 347, aaa0628 (2015).
Filacchione, G. et al. The global surface composition of 67P/CG nucleus by Rosetta/VIRTIS. (1) Prelanding mission phase. Icarus 274, 334–349 (2016).
Coradini, A. et al. VIRTIS: an imaging spectrometer for the Rosetta mission. Space Sci. Rev. 128, 529–559 (2007).
Filacchione, G. On-ground characterization of Rosetta/VIRTIS-M. II. Spatial and radiometric calibrations. Rev. Sci. Instrum. 77, 103106 (2006).
Ammannito, E. et al. On-ground characterization of Rosetta/VIRTIS-M. I. Spectral and geometrical calibrations. Rev. Sci. Instrum. 77, 093109 (2006).
Raponi, A. et al. The temporal evolution of exposed water ice-rich areas on the surface of 67P/Churyumov-Gerasimenko: spectral analysis. Mon. Not. R. Astron. Soc. 462 (Issue Suppl. 1), S476–S490 (2016).
Blum, J. et al. Evidence for the formation of comet 67P/Churyumov-Gerasimenko through gravitational collapse of a bound clump of pebbles. Mon. Not. R. Astron. Soc. 469, S755–S773 (2017).
Skorov, Y. V. & Blum, J. Dust release and tensile strength of the non-volatile layer of cometary nuclei. Icarus 221, 1–11 (2012).
Davidsson, B. J. R. et al. The primordial nucleus of comet 67P/Churyumov-Gerasimenko. Astron. Astrophys. 592, A63 (2016).
Güttler, C. et al. The physics of protoplanetesimal dust agglomerates. IV. Toward a dynamical collision model. Astrophys. J. 701, 130–141 (2009).
Schräpler, R. et al. The stratification of regolith on celestial objects. Icarus 257, 33–46 (2015).
Oquendo-Patiño, W. F. & Estrada-Mejia, N. Optimal packing of poly-disperse spheres in 3D: effect of the grain size span and shape. In Proc. VI International Conference on Particle-based Methods—Fundamentals and Applications (eds Oñate, E. et al.) 313–319 (CIMNE, 2019).
Onoda, G. Y. & Liniger, E. G. Random loose packings of uniform spheres and the dilatancy onset. Phys. Rev. Lett. 64, 2727–2730 (1990).
Luding, S. Granular matter: so much for the jamming point. Nat. Phys. 12, 531–532 (2016).
Acknowledgements
B.G. and J.B. thank Deutsches Zentrum für Luft- und Raumfahrt (DLR) for continuous support and Deutsche Forschungsgemeinschaft for their support under grant Bl 298/24-2 in the framework of the Research Unit FOR 2285 ‘Debris disks in planetary systems’. OSIRIS was built by a consortium led by Max-Planck-Institut für Sonnensystemforschung, Göttingen, Germany, in collaboration with CISAS, University of Padova, Italy, Laboratoire d’Astrophysique de Marseille, France, Instituto de Astrofisica de Andalucia, CSIC, Granada, Spain, the Scientific Support Office of the European Space Agency, Noordwijk, The Netherlands, Instituto Nacional de Tecnica Aeroespacial, Madrid, Spain, Universidad Politechnica de Madrid, Spain, the Department of Physics and Astronomy of Uppsala University, Sweden, and Institut für Datentechnik und Kommunikationsnetze der Technischen Universität Braunschweig, Germany. The support of the national funding agencies of Germany (DLR), France (CNES), Italy (ASI), Spain (MEC), Sweden (SNSB), and the ESA Technical Directorate is gratefully acknowledged. Those authors who are part of the VIRTIS and GIADA teams wish to thank the Italian Space Agency (ASI, Italy; contract number I/024/12/2) and Centre National d’Études Spatiales (CNES, France) for supporting their contribution. The contribution of the ROMAP and RPC-MAG teams was financially supported by the German Ministerium für Wirtschaft und Energie and the Deutsches Zentrum für Luft- und Raumfahrt under contract 50QP1401. This research has made use of the scientific software shapeViewer (www.comet-toolbox.com). Video rendering was powered by PRo3D, a viewer for the exploration and analysis of planetary and smaller body surface reconstructions. It was developed by VRVis Zentrum für Virtual Reality und Visualisierung Forschungs-GmbH in close collaboration with Joanneum Research and Imperial College London; see http://pro3d.space for more details. Trajectory and instrumental information relevant to the observations performed on Rosetta was based on the use of SPICE kernels. We acknowledge the important role played by the Rosetta Science Ground Segment, the Rosetta Mission Operations Team and the Philae Lander team(s) in the running of the Rosetta mission and Philae Lander Operations.
Author information
Authors and Affiliations
Contributions
Identification of the skull-top crevice ice and other touchdown points was made by L.O’R. The lead writer of the paper is L.O’R. Contributions to Methods and sections of Supplementary Information were made by L.O’R., P.H., S.F., H.V.H., G.F., A.R., M.C., J.B., B. Gundlach, A.R., M.d.P.C.P. and G.P. The ROMAP and RPC-MAG data analysis was performed by P.H., K.-H.G. and H.-U.A. in close collaboration with L.O’R. The compressive strength and porosity analysis was performed by J.B. and B.G. The OSIRIS image analysis was performed by L.O’R., S.F. and H.V.H. The VIRTIS data analysis was carried out by G.F., A.R., M.C. and F.C. The skull-top crevice ice and dust analysis was carried out by A.R., D.B.-M., M.K., O.G. and N.O. The OSIRIS image processing was performed by S.F., H.V.H., G.K., C.T. and H.S. Trajectory data analysis was performed by B. Grieger, L.O’R., R.A.B., P.H., J.-B.V., C.T. and H.S. Shape model support and analysis were provided by L.J., J.-B.V., R.A.B., M.d.P.C.P. and G.P. Figures (in support of analysis) were generated by L.O’R., P.H., R.A.B., J.B., B. Gundlach, S.F., H.V.H., G.F., A.R. and M.C. All authors have participated in the review of the paper and its contents.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests. One of the authors, N.O., is currently an editor at Nature Communications, but was not in any way involved in the journal review process.
Additional information
Peer review information Nature thanks Erik Asphaug, Dennis Bodewits, Mathieu Choukroun and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
Extended Data Fig. 1 Comparison of pre-landing and post-landing images.
a, b, Comparison of the location of the skull-top ridge (yellow rectangle) as it looked in a pre-landing OSIRIS image (a; 22 October 2014) and in a post-landing image (b; 14 May 2016). The yellow dashed lines outline the skull-top boulders (see Supplementary Video 1 for a detailed comparison), while context terrain similarities between images are shown in blue dashed lines. Although the spacecraft distance is the same (about 8 km), the solar illumination and the Rosetta viewing geometry differ between the images. An arrow points at the Philae lander location in b.
Extended Data Fig. 2 OSIRIS colour composites of skull-top boulders.
(In a–h, the boxed feature in the main image is shown magnified in the inset. In i, j, no magnification is required.) a, b, Pre-landing images of skull-top boulders. RGB setting; ‘green’ = F24 (480.7 nm), ‘red’ = F22 (649.2 nm), ‘blue’ = F16 (360.0 nm). c–e, Skull-top boulders observed in December 2014. RGB setting; ‘green’ = ‘red’ = F22 (649.2 nm), ‘blue’ = F24 (480.7 nm). f–i, The skull-top boulders observed in March 2016. RGB setting; ‘green’ = ‘red’ = F22 (649.2 nm), ‘blue’ = F24 (480.7 nm). j–m, Colour composite of the skull-top boulders in early and mid-June 2016 with the brightly lit ice feature visible in k–m specifically. RGB setting; ‘green’ = F24 (480.7 nm), ‘red’ = F22 (649.2 nm), ‘blue’ = F16 (360.0 nm).
Extended Data Fig. 3 Illumination geometry of the skull-top crevice.
a, OSIRIS NAC image of the Abydos region on 12 June 2016 with three overlaid azimuth plots. The central point of each plot is positioned on the skull-top crevice. The two skull-top boulders are outlined by the green ellipse and the crevice by a tiny purple ellipse inside it. At this central point the viewer is at a 90° angle, that is, an overhead view; each concentric circle represents a decrease in viewing angle of 10°. The large red box encloses an azimuth plot overlaid on the image and the green line shows the horizon. The red area in the two left-hand azimuth plots shows the track of the Sun over this region during the full period of the Philae landing and to the end of the Rosetta mission, while the yellow line overlay is the crevice’s own horizon mask (created as explained in b). b, Example azimuth plot for 21 August 19:19–19:24 ut with Rosetta’s position and the Sun’s position at this time marked by the very short green and red lines. These short lines are then connected by long blue lines to the central crevice. This gives the line of sight for the OSIRIS camera and for solar illumination of the crevice during this period. We then look at the OSIRIS image (inset) to see if the crevice is illuminated. We find that it is, which is why it lies inside the red-lined horizon mask. The dot-dashed line passes right through the crevice, meaning that the right of that line is the right side of the crevice and the left, the left side.
Extended Data Fig. 4 VIRTIS water-ice analysis plots.
a, b, Average radiance factor of the skull-top boulder location (blue curve) and of the nearby dark terrain (red curve) before (a) and after (b) normalization at 550 nm. c, Theoretical abundance of water ice as a function of the spectral slope in the visible (VIS) spectral channel44. Black dots and dashed lines indicate a water-ice-rich region observed by VIRTIS to calibrate the theoretical curves. The black line represents a solely areal mixing case and the red line a solely intimate mixing case. The blue and green lines represent a merge of both, with different mixing ratios of 1 and 10, respectively. The x-axis values correspond to slope values scaled to the dark terrain unit viewing conditions (Fig. 3b, panel b1, red box) for observation V1_00424522185.QUB.
Extended Data Fig. 5 Combined ROMAP and RPC-MAG magnetic-field and boom measurements.
The three components of the magnetic field observations (Bx, By, Bz, respectively top, middle and bottom) are shown starting before TD2 at 17:23:00 utc and ending shortly after the boom movement was detected. This figure also shows the concurrent orbiter RPC-MAG observations as a reference. See Methods and Supplementary Methods section 7 for a detailed description.
Extended Data Fig. 6 Philae interaction geometry and boulder volume-filling factor.
a, Interaction geometry of Philae with the ice/dust at the moment of deepest penetration in TD2c. b, Philae superimposed on an OSIRIS image (2 September 2016), showing an interaction geometry equivalent to that in a. c, Compressive stress curves for a boulder consisting of pebbles. Note that the volume-filling factor Φ denotes packing of porous pebbles only; these are then further packed to make up the whole boulder. See Methods for a detailed explanation of this panel.
Supplementary information
Supplementary Information
This file contains fourteen sections describing the engineering and scientific detective story that serves as the backdrop to this paper. While some sections are high-level and descriptive, others are very detailed as they expand the contents of the main paper Methods section. Fifteen Supplementary Figures are provided; four are videos.
41586_2020_2834_MOESM3_ESM.mov
Video 1 Animation showing comparison between pre and post-landing images - This video allows the viewer to see a comparison being made between the image from 22nd October 2014 and that taken on the 14th May 2016. The comparison shows the similarities (yellow boxes) and also the differences (red boxes).
41586_2020_2834_MOESM5_ESM.mov
Video 3 Animation of Fig. 2 of main paper - Philae is shown flying through Skull-top crevice in (b) with the link to the data observed by ROMAP (a). As Philae impresses on TD2a, b, c and d, the corresponding markings are highlighted. Images (c), (e) and (f) are not present in Fig. 2 of the main paper but Philae is shown also flying through these images.
41586_2020_2834_MOESM6_ESM.mov
Video 4 Animation showing the TD2b Dust wall - This animation shows a repeated set of images (going forward in time and then in reverse order) from the back side view of the skull-top boulders where a structure separate from the crevice is presented i.e. the dust wall (highlighted in yellow).
Rights and permissions
About this article
Cite this article
O’Rourke, L., Heinisch, P., Blum, J. et al. The Philae lander reveals low-strength primitive ice inside cometary boulders. Nature 586, 697–701 (2020). https://doi.org/10.1038/s41586-020-2834-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41586-020-2834-3
This article is cited by
-
Surface Compositions of Trojan Asteroids
Space Science Reviews (2024)
-
Measuring the mechanical properties of small body regolith layers using a granular penetrometer
Astrodynamics (2023)
-
Macro and micro structures of pebble-made cometary nuclei reconciled by seasonal evolution
Nature Astronomy (2022)
-
AMBITION – comet nucleus cryogenic sample return
Experimental Astronomy (2022)
-
‘Like froth on a cappuccino’: spacecraft’s chaotic landing reveals comet’s softness
Nature (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
