Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Self-assembled poly-catenanes from supramolecular toroidal building blocks

A Publisher Correction to this article was published on 09 December 2020

An Author Correction to this article was published on 12 September 2020

This article has been updated

Abstract

Mechanical interlocking of molecules (catenation) is a nontrivial challenge in modern synthetic chemistry and materials science1,2. One strategy to achieve catenation is the design of pre-annular molecules that are capable of both efficient cyclization and of pre-organizing another precursor to engage in subsequent interlocking3,4,5,6,7,8,9. This task is particularly difficult when the annular target is composed of a large ensemble of molecules, that is, when it is a supramolecular assembly. However, the construction of such unprecedented assemblies would enable the visualization of nontrivial nanotopologies through microscopy techniques, which would not only satisfy academic curiosity but also pave the way to the development of materials with nanotopology-derived properties. Here we report the synthesis of such a nanotopology using fibrous supramolecular assemblies with intrinsic curvature. Using a solvent-mixing strategy, we kinetically organized a molecule that can elongate into toroids with a radius of about 13 nanometres. Atomic force microscopy on the resulting nanoscale toroids revealed a high percentage of catenation, which is sufficient to yield ‘nanolympiadane’10, a nanoscale catenane composed of five interlocked toroids. Spectroscopic and theoretical studies suggested that this unusually high degree of catenation stems from the secondary nucleation of the precursor molecules around the toroids. By modifying the self-assembly protocol to promote ring closure and secondary nucleation, a maximum catenation number of 22 was confirmed by atomic force microscopy.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Self-assembly of a barbiturated monomer into various supramolecular polymer topologies.
Fig. 2: Supramolecular polymerization protocols.
Fig. 3: Solvent dependence of the catenane yield.
Fig. 4: Nano-polycatenanes.

Similar content being viewed by others

Data availability

All data supporting the findings of this study are available within the paper and its Supplementary Information files.

Change history

References

  1. Segawa, Y. et al. Topological molecular nanocarbons: all-benzene catenane and trefoil knot. Science 365, 272–276 (2019).

    Article  ADS  CAS  Google Scholar 

  2. Leigh, D. A., Pritchard, R. G. & Stephens, A. J. A Star of David catenane. Nat. Chem. 6, 978–982 (2014).

    Article  CAS  Google Scholar 

  3. Li, H. et al. Quantitative self-assembly of a purely organic three-dimensional catenane in water. Nat. Chem. 7, 1003–1008 (2015).

    Article  CAS  Google Scholar 

  4. Fujita, M., Ibukuro, F., Hagihara, H. & Ogura, K. Quantitative self-assembly of a [2]catenane from two preformed molecular rings. Nature 367, 720–723 (1994).

    Article  ADS  CAS  Google Scholar 

  5. Hunter, C. A. Synthesis and structure elucidation of a new [2]-catenane. J. Am. Chem. Soc. 114, 5303–5311 (1992).

    Article  CAS  Google Scholar 

  6. Ashton, P. R. et al. A [2]catenane made to order. Angew. Chem. Int. Ed. 28, 1396–1399 (1989).

    Article  Google Scholar 

  7. Dietrich-Buchecker, C. O., Sauvage, J. P. & Kintzinger, J. P. Une nouvelle famille de molecules: les metallo-catenanes. Tetrahedr. Lett. 24, 5095–5098 (1983).

    Article  CAS  Google Scholar 

  8. Wasserman, E. Chemical topology. Sci. Am. 207, 94–102 (1962).

    Article  ADS  Google Scholar 

  9. Wu, Q. et al. Poly[n]catenanes: synthesis of molecular interlocked chains. Science 358, 1434–1439 (2017).

    Article  ADS  CAS  Google Scholar 

  10. Amabilino, D. B., Ashton, P. R., Reder, A. S., Spencer, N. & Stoddart, J. F. Olympiadane. Angew. Chem. Int. Ed. 33, 1286–1290 (1994).

    Article  Google Scholar 

  11. Yagai, S., Kitamoto, Y., Datta, S. & Adhikari, B. Supramolecular polymers capable of controlling their topology. Acc. Chem. Res. 52, 1325–1335 (2019).

    CAS  PubMed  Google Scholar 

  12. Hollamby, M. J. et al. Simultaneous SAXS and SANS analysis for the detection of toroidal supramolecular polymers composed of noncovalent supermacrocycles in solution. Angew. Chem. Int. Ed. 55, 9890–9893 (2016).

    Article  CAS  Google Scholar 

  13. Yagai, S. et al. Self-organization of hydrogen-bonding naphthalene chromophores into J-type nanorings and H-type nanorods: impact of regioisomerism. Angew. Chem. Int. Ed. 51, 6643–6647 (2012).

    Article  CAS  Google Scholar 

  14. Adhikari, B., Aratsu, K., Davis, J. & Yagai, S. Photoresponsive circular supramolecular polymers: a topological trap and photoinduced ring-opening elongation. Angew. Chem. Int. Ed. 58, 3764–3768 (2019).

    Article  CAS  Google Scholar 

  15. Adhikari, B. et al. Light-induced unfolding and refolding of supramolecular polymer nanofibres. Nat. Commun. 8, 15254 (2017).

    Article  ADS  Google Scholar 

  16. Prabhu, D. D. et al. Self-folding of supramolecular polymers into bioinspired topology. Sci. Adv. 4, eaat8466 (2018).

    Article  ADS  Google Scholar 

  17. Korevaar, P. A. et al. Pathway complexity in supramolecular polymerization. Nature 481, 492–496 (2012).

    Article  ADS  CAS  Google Scholar 

  18. Gil-Ramírez, G., Leigh, D. A. & Stephens, A. J. Catenanes: fifty years of molecular links. Angew. Chem. Int. Ed. 54, 6110–6150 (2015).

    Article  Google Scholar 

  19. Cohen, S. I. A., Vendruscolo, M., Dobson, C. M. & Knowles, T. P. J. From macroscopic measurements to microscopic mechanisms of protein aggregation. J. Mol. Biol. 421, 160–171 (2012).

    Article  CAS  Google Scholar 

  20. Ogi, S., Sugiyasu, K., Manna, S., Samitsu, S. & Takeuchi, M. Living supramolecular polymerization realized through a biomimetic approach. Nat. Chem. 6, 188–195 (2014).

    Article  CAS  Google Scholar 

  21. Wang, X. et al. Cylindrical block copolymer micelles and co-micelles of controlled length and architecture. Science 317, 644–647 (2007).

    Article  ADS  CAS  Google Scholar 

  22. Zhang, W. et al. Supramolecular linear heterojunction composed of graphite-like semiconducting nanotubular segments. Science 334, 340–343 (2011).

    Article  ADS  CAS  Google Scholar 

  23. Suzuki, A. et al. Topological impact on the kinetic stability of supramolecular polymers. J. Am. Chem. Soc. 141, 13196–13202 (2019).

    Article  CAS  Google Scholar 

  24. Breßler, I., Kohlbrecher, J. & Thünemann, A. F. SASfit: a tool for small-angle scattering data analysis using a library of analytical expressions. J. Appl. Cryst. 48, 1587–1598 (2015).

    Article  Google Scholar 

  25. Meisl, G. et al. Molecular mechanisms of protein aggregation from global fitting of kinetic models. Nat. Protocols 11, 252–272 (2016).

    Article  CAS  Google Scholar 

  26. Laio, A. & Parrinello, M. Escaping free-energy minima. Proc. Natl Acad. Sci. USA 99, 12562–12566 (2002).

    Article  ADS  CAS  Google Scholar 

  27. Bochicchio, D., Salvalaglio, M. & Pavan, G. M. Into the dynamics of a supramolecular polymer at submolecular resolution. Nat. Commun. 8, 147 (2017).

    Article  ADS  Google Scholar 

  28. Anwar, J., Khan, S. & Lindfors, L. Secondary crystal nucleation: nuclei breeding factory uncovered. Angew. Chem. Int. Ed. 54, 14681–14684 (2015).

    Article  CAS  Google Scholar 

  29. Kondepudi, D. K. & Asakura, K. Chiral autocatalysis, spontaneous symmetry breaking, and stochastic behavior. Acc. Chem. Res. 34, 946–954 (2001).

    Article  CAS  Google Scholar 

  30. Kondepudi, D. K., Kaufman, R. J. & Singh, N. Chiral symmetry breaking in sodium chlorate crystallization. Science 250, 975–976 (1990).

    Article  ADS  CAS  Google Scholar 

Download references

Acknowledgmements

This work was supported by KAKENHI grant number 26102010 and a Grant-in-Aid for Scientific Research on Innovative Areas “π-Figuration” (grant number 26102001) from the Japanese Ministry of Education, Culture, Sports, Science, and Technology (MEXT). This work was also supported by JSPS KAKENHI grant number 19H02760. S.Y. acknowledges financial support from the Murata Science Foundation and the Shorai Foundation for Science and Technology. S.D. and K.A. thank the JSPS for research fellowships P19341 and 17J02520, respectively. G.M.P. acknowledges funding by the Swiss National Science Foundation (SNSF grants IZLIZ2_183336 and 200021_175735) and by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement number 818776 - DYNAPOL). G.M.P. also acknowledges the computational resources provided by the Swiss National Supercomputing Centre (CSCS) and by CINECA. The SANS experiment at the ISIS facility was allocated under beamtime XB1980292 (https://doi.org/10.5286/ISIS.E.RB1990292-1).

Author information

Authors and Affiliations

Authors

Contributions

S.Y. and S.D. designed the project. Y. Kato and S.H. performed most of the experimental work. M.J.H., A.J.S., R.D. and N.M. recorded and simulated the SAXS/SANS data and wrote the SAXS/SANS section of the manuscript. G.M.P., L.P. and C.P. performed the theoretical calculation and wrote the theoretical calculation section of the manuscript. S.Y. and S.D. analysed and explained the experimental data. S.Y. and S.D. prepared the overall manuscript, including figures. All authors, including K.A., A.I., T.S., D.D.P. and Y. Kitamoto, contributed by commenting on the manuscript. The overall project was directed by S.Y.

Corresponding author

Correspondence to Shiki Yagai.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data figures and tables

Extended Data Fig. 1 Separation of toroids from elongated fibres via thermal reorganization followed by membrane filtration.

a, AFM image of supramolecular polymers obtained by heating a quenched solution of 1 (cT = 1 × 10−4 M) in MCH/CHCl3 (9:1 v:v) at 363 K for 5 min and subsequently cooling to 293 K at a cooling rate of 1.0 K min−1. b, AFM image of supramolecular polymers obtained after passing the resulting solution through a membrane filter with a pore size of 200 nm. The samples were spin-coated onto a HOPG substrate at 293 K. Scale bars, 100 nm.

Extended Data Fig. 2 AFM images of supramolecular polymers obtained in various n-alkanes by single-injection solvent-mixing experiment.

af, AFM images of supramolecular polymers prepared by injecting a 100-μl chloroform solution of 1 (1 × 10−3 M) into 900 μl of n-hexane (a), n-heptane (b), n-octane (c, d), n-nonane (e) or n-decane (f) in one portion. Nano-[n]catenanes with n = 2, 3, 4, 5, 6 are shown by dashed white, blue, green, red and pink circles, respectively. The samples were spin-coated onto a HOPG substrate at 293 K. Scale bars, 100 nm.

Extended Data Fig. 3 AFM images and height profile analysis of nanolympiadane.

a, b, AFM images of nanolympiadane obtained by injecting 100 μl of a chloroform solution of 1 (1 × 10−3 M) into 900 μl of n-octane in one portion. c, AFM height profile analysis of nanolympiadane. Scale bars, 50 nm.

Extended Data Fig. 4 Three-dimensional representations of nanolympiadane and Olympic logo.

a, Three-dimensional arrangement of five toroids in our nanolympiadane on a HOPG surface. b, Three-dimensional representation of five toroids deduced from the two-dimensional representation of the Olympic logo.

Extended Data Fig. 5 Dependence of yields of various supramolecular polymer topologies in different poor solvents on the number of monomer solution injections.

Histogram showing the yield of catenanes (red bars), toroids (green bars) and open-ended coils (blue bars) according to the choice of poor solvent and the number of injections of monomer solution.

Extended Data Fig. 6 Additional AFM images of nano-poly[n]catenanes.

an, AFM images of nano-[6]catenanes (a, b), nano-poly[7]catenanes (c, d), nano-poly[8]catenanes (e), nano-poly[10]catenanes (f, g), nano-poly[11]catenanes (h), nano-poly[12]catenanes (i, j), nano-poly[13]catenanes (k), nano-poly[14]catenanes (l), nano-poly[15]catenanes (m) and nano-poly[18]catenanes (n) obtained by injecting ten portions (one per second) of 10 μl of a chloroform solution of 1 (1 × 10−3 M) into 900 μl of poor solvent. Nano-[6]catenanes (a, b), nano-poly[7]catenanes (c), nano-poly[8]catenanes (e), nano-poly[11]catenanes (h), nano-poly[12]catenanes (j), nano-poly[13]catenanes (k), nano-poly[14]catenanes (l), nano-poly[15]catenanes (m) and nano-poly[18]catenanes (n) were obtained using n-octane as poor solvent. Nano-poly[7]catenanes (d), nano-poly[10]catenanes (f, g) and nano-poly[12]catenanes (i) were obtained when cyclohexane (d, i) and MCH (f, g) were used as poor solvents. The samples were spin-coated onto a HOPG substrate at 293 K. The numbers of interlocked toroids of nano-[n]catenanes and nano-poly[n]catenanes are shown. Scale bars, 50 nm.

Supplementary information

Supplementary Information

This file contains Supplementary Methods and Computational Details, Supplementary Figures 1–13, two Supplementary Discussions, Supplementary Table 1 and Supplementary References.

Supplementary Data 1

The structure of the coarse-grained model of a full rosette (pdb format).

Supplementary Data 2

Force field parameters for the explicit-solvent CG model of a full rosette (itp GROMACS format).

Supplementary Data 3

Force field parameters for the implicit-solvent CG model of a full rosette (itp GROMACS format).

Supplementary Data 4

The structure of the coarse-grained model of a full toroid (pdb format).

Supplementary Video 1

Single-injection solvent mixing experiment. Demonstration of the solvent-mixing experiment for the preparation of kinetic supramolecular polymer species by injecting a 100 μL chloroform solution of 1 (cT = 1 × 10−3 M) into 900 μL of MCH in one portion.

Supplementary Video 2

Ten-injections solvent mixing experiment. Demonstration of the solvent-mixing experiment for the preparation of kinetic supramolecular polymer species by injecting ten portions (one per second) of 10 μL of a chloroform solution of 1 (1 × 10−3 M) into 900 μL of MCH solvent.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Datta, S., Kato, Y., Higashiharaguchi, S. et al. Self-assembled poly-catenanes from supramolecular toroidal building blocks. Nature 583, 400–405 (2020). https://doi.org/10.1038/s41586-020-2445-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41586-020-2445-z

This article is cited by

Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing