Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Power generation from ambient humidity using protein nanowires


Harvesting energy from the environment offers the promise of clean power for self-sustained systems1,2. Known technologies—such as solar cells, thermoelectric devices and mechanical generators—have specific environmental requirements that restrict where they can be deployed and limit their potential for continuous energy production3,4,5. The ubiquity of atmospheric moisture offers an alternative. However, existing moisture-based energy-harvesting technologies can produce only intermittent, brief (shorter than 50 seconds) bursts of power in the ambient environment, owing to the lack of a sustained conversion mechanism6,7,8,9,10,11,12. Here we show that thin-film devices made from nanometre-scale protein wires harvested from the microbe Geobacter sulfurreducens can generate continuous electric power in the ambient environment. The devices produce a sustained voltage of around 0.5 volts across a 7-micrometre-thick film, with a current density of around 17 microamperes per square centimetre. We find the driving force behind this energy generation to be a self-maintained moisture gradient that forms within the film when the film is exposed to the humidity that is naturally present in air. Connecting several devices linearly scales up the voltage and current to power electronics. Our results demonstrate the feasibility of a continuous energy-harvesting strategy that is less restricted by location or environmental conditions than other sustainable approaches.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Nanowire devices and electric output.
Fig. 2: Moisture gradient in nanowire film and electric output.
Fig. 3: Mechanisms for electric output.
Fig. 4: Powering from nanowire devices.

Similar content being viewed by others

Data availability

The data that support the findings of this study are available within the paper and Supplementary Information. Additional supporting data generated during the present study are available from the corresponding author upon reasonable request.


  1. Tentzeris, M. M., Georgiadis, A. & Roselli, L. Energy harvesting and scavenging. Proc. IEEE 102, 1644–1648 (2014).

    Article  Google Scholar 

  2. Abowd, G. D. & Mynatt, E. D. Charting past, present, and future research in ubiquitous computing. ACM Trans. Comput. Hum. Interact. 7, 29–58 (2000).

    Article  Google Scholar 

  3. Parida, B., Iniyan, S. & Goic, R. A review of solar photovoltaic technologies. Renew. Sustain. Energy Rev. 15, 1625–1636 (2011).

    Article  CAS  Google Scholar 

  4. Wang, Z. L. Triboelectric nanogenerators as new energy technology for self-powered systems and active mechanical and chemical sensors. ACS Nano 7, 9533–9557 (2013).

    Article  CAS  Google Scholar 

  5. Champier, D. Thermoelectric generators: a review of applications. Energy Convers. Manage. 140, 167–181 (2017).

    Article  Google Scholar 

  6. Zhao, F., Cheng, H., Zhang, Z., Jiang, L. & Qu, L. Direct power generation from a graphene oxide film under moisture. Adv. Mater. 27, 4351–4357 (2015).

    Article  CAS  Google Scholar 

  7. Xue, J. et al. Vapor-activated power generation on conductive polymer. Adv. Funct. Mater. 26, 8784–8792 (2016).

    Article  CAS  Google Scholar 

  8. Zhao, F., Liang, Y., Cheng, H., Jiang, L. & Qu, L. Highly efficient moisture-enabled electricity generation from graphene oxide frameworks. Energy Environ. Sci. 9, 912–916 (2016).

    Article  CAS  Google Scholar 

  9. Ding, T. et al. All-printed porous carbon film for electricity generation from evaporation-driven water flow. Adv. Funct. Mater. 27, 1700551 (2017).

    Article  Google Scholar 

  10. Shen, D. et al. Self-powered wearable electronics based on moisture enabled electricity generation. Adv. Mater. 30, 1705925 (2018).

    Article  Google Scholar 

  11. Liu, K. et al. Induced potential in porous carbon films through water vapor adsorption. Angew. Chem. Int. Edn 55, 8003–8007 (2016).

    Article  CAS  Google Scholar 

  12. Cheng, H. et al. Spontaneous power source in ambient air of a well-directionally reduced graphene oxide bulk. Energy Environ. Sci. 11, 2839–2845 (2018).

    Article  CAS  Google Scholar 

  13. Xue, G. et al. Water-evaporation-induced electricity with nanostructured carbon materials. Nat. Nanotechnol. 12, 317–321 (2017).

    Article  CAS  ADS  Google Scholar 

  14. Zhang, Z. et al. Emerging hydrovoltaic technology. Nat. Nanotechnol. 13, 1109–1119 (2018).

    Article  CAS  ADS  Google Scholar 

  15. Lovley, D. R. Electrically conductive pili: biological function and potential applications in electronics. Curr. Opin. Electrochem 4, 190–198 (2017).

    Article  CAS  Google Scholar 

  16. Lovley, D. R. e-Biologics: fabrication of sustainable electronics with “green” biological materials. MBio 8, e00695 (2017).

    Article  CAS  Google Scholar 

  17. Lovley, D. R. & Walker, D. J. F. Geobacter protein nanowires. Front. Microbiol. 10, 2078 (2019).

    Article  Google Scholar 

  18. Malvankar, N. S. et al. Tunable metallic-like conductivity in microbial nanowire networks. Nat. Nanotechnol. 6, 573–579 (2011).

    Article  ADS  Google Scholar 

  19. Adhikari, R. Y., Malvankar, N. S., Tuominen, M. T. & Lovley, D. R. Conductivity of individual Geobacter pili. RSC Adv. 6, 8354–8357 (2016).

    Article  CAS  Google Scholar 

  20. Filman, D. J. et al. Cryo-EM reveals the structural basis of long-range electron transport in a cytochrome-based bacterial nanowire. Commun. Biol. 2, 219 (2019).

    Google Scholar 

  21. Wang, F. et al. Structure of microbial nanowires reveals stacked hemes that transport electrons over micrometers. Cell 177, 361–369 (2019).

    Article  CAS  Google Scholar 

  22. Feliciano, G. T., Steidl, R. J. & Reguera, G. Structural and functional insights into the conductive pili of Geobacter sulfureducens revealed in molecular dynamics simulations. Phys. Chem. Chem. Phys. 17, 22217 (2015).

    Article  CAS  Google Scholar 

  23. Xiao, K. et al. Low energy atomic models suggesting a pilus structure that could account for electrical conductivity of Geobacter sulfurredecens pili. Sci. Rep. 6, 23385 (2016).

    Article  CAS  ADS  Google Scholar 

  24. Ho, C. K. & Webb, S. W. Gas Transport in Porous Media (Springer, 2006).

  25. Soares, L. C., Bertazzo, S., Burgo, T. A. L., Baldim, V. & Galembeck, F. A new mechanism for the electrostatic charge build-up and dissipation in dielectrics. J. Braz. Chem. Soc. 19, 277–286 (2008).

    CAS  Google Scholar 

  26. Gouveia, R. F. & Galembeck, F. Electrostatic charging of hydrophilic particles due to water adsorption. J. Am. Chem. Soc. 131, 11381–11386 (2009).

    Article  CAS  Google Scholar 

  27. Ducati, T. R. D., Simoes, L. H. & Galembeck, F. Charge partitioning at gas-solid interfaces: humidity causes electricity buildup on metals. Langmuir 26, 13763–13766 (2010).

    Article  CAS  Google Scholar 

  28. Perkins, R. S. Rate laws for elementary chemical reactions. J. Chem. Educ. 51, 254 (1974).

    Article  CAS  Google Scholar 

  29. Wright, S. H. Generation of resting membrane potential. Adv. Physiol. Educ. 28, 139–142 (2004).

    Article  Google Scholar 

  30. Yin, B., Liu, X., Gao, H., Fu, T. & Yao, J. Bioinspired and bristled microparticles for ultrasensitive pressure and strain sensors. Nat. Commun. 9, 5161 (2018).

    Article  ADS  Google Scholar 

  31. Vargas, M. et al. Aromatic amino acids required for pili conductivity and long-range extracellular electron transport in Geobacter sulfurreducens. MBio 4, e00105-13 (2013); erratum 4, e00210-13 (2013).

    Article  Google Scholar 

  32. Xiang, J. et al. Ge/Si nanowire heterostructures as high-performance field-effect transistors. Nature 441, 489–493 (2006).

    Article  CAS  ADS  Google Scholar 

  33. Yao, J. et al. Nanowire nanocomputer as a finite-state machine. Proc. Natl Acad. Sci. USA 111, 2431–2435 (2014).

    Article  CAS  ADS  Google Scholar 

  34. Esteve-Núñez, A., Rothermich, M. M., Sharma, M. & Lovley, D. R. Growth of Geobacter sulfurreducens under nutrient-limiting conditions in continuous culture. Environ. Microbiol. 7, 641–648 (2005).

    Article  Google Scholar 

  35. Coppi, M. V., Leang, C., Sandler, S. J. & Lovley, D. R. Development of a genetic system for Geobacter sulfurreducens. Appl. Environ. Microbiol. 67, 3180–3187 (2001).

    Article  CAS  Google Scholar 

  36. Tan, Y. et al. Expressing the Geobacter metallireducens PilA in Geobacter sulfurreducens yields pili with exceptional conductivity. MBio 8, e02203-16 (2017).

    Article  CAS  Google Scholar 

  37. Tan, Y. et al. Synthetic biological protein nanowires with high conductivity. Small 12, 4481–4485 (2016).

    Article  CAS  ADS  Google Scholar 

  38. Feng, J. et al. Giant moisture responsiveness of VS2 ultrathin nanosheets for novel touchless positioning interface. Adv. Mater. 24, 1969–1974 (2012).

    Article  CAS  Google Scholar 

  39. Brooks, B. R. et al. CHARMM: the biomolecular simulation program. J. Comput. Chem. 30, 1545–1614 (2009).

    Article  CAS  Google Scholar 

  40. Huang, J. et al. CHARMM36m: an improved force field for folded and intrinsically disordered proteins. Nat. Methods 14, 71–73 (2017).

    Article  CAS  Google Scholar 

  41. Smart, O. S., Neduvelil, J. G., Wang, X., Wallace, B. A. & Sansom, M. S. P. HOLE: a program for the analysis of the pore dimensions of ion channel structural models. J. Mol. Graph. Model. 14, 354–360 (1996).

    Article  CAS  Google Scholar 

Download references


J.Y. and D.R.L. acknowledge support from a seed fund through the Office of Technology Commercialization and Ventures at the University of Massachusetts, Amherst. J.C. and Xiaorong L. acknowledge support from the National Institutes of Health (grant GM114300 to J.C.). Part of the device fabrication work was conducted in the Center for Hierarchical Manufacturing (CHM), a National Science Foundation (NSF) Nanoscale Science and Engineering Center (NSEC) located at the University of Massachusetts Amherst.

Author information

Authors and Affiliations



J.Y. and Xiaomeng L. conceived the project and designed experiments. D.R.L. oversaw material design and production. Xiaomeng L. carried out experimental studies. H.G. helped with device fabrication and characterization. J.E.W. performed material synthesis and imaging. Xiaorong L. and J.C. designed the computational study and analysis. Xiaorong L. performed simulations and analysis. B.Y. performed resistance simulations. T.F. helped with electrode fabrication. J.Y. and D.R.L. wrote the paper. All authors discussed the results and implications and commented on the manuscript at all stages.

Corresponding author

Correspondence to Jun Yao.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature thanks Liangti Qu and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

This PDF file includes Supplementary Figs. 1 to 27 and Supplementary References.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Liu, X., Gao, H., Ward, J.E. et al. Power generation from ambient humidity using protein nanowires. Nature 578, 550–554 (2020).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing