Machines made of soft materials bridge life sciences and engineering1. Advances in soft materials have led to skin-like sensors and muscle-like actuators for soft robots and wearable devices1,2,3. Flexible or stretchable counterparts of most key mechatronic components have been developed4,5, principally using fluidically driven systems6,7,8; other reported mechanisms include electrostatic9,10,11,12, stimuli-responsive gels13,14 and thermally responsive materials such as liquid metals15,16,17 and shape-memory polymers18. Despite the widespread use of fluidic actuation, there have been few soft counterparts of pumps or compressors, limiting the portability and autonomy of soft machines4,8. Here we describe a class of soft-matter bidirectional pumps based on charge-injection electrohydrodynamics19. These solid-state pumps are flexible, stretchable, modular, scalable, quiet and rapid. By integrating the pump into a glove, we demonstrate wearable active thermal management. Embedding the pump in an inflatable structure produces a self-contained fluidic ‘muscle’. The stretchable pumps have potential uses in wearable laboratory-on-a-chip and microfluidic sensors, thermally active clothing and autonomous soft robots.
Your institute does not have access to this article
Open Access articles citing this article.
Switching control of latex balloon expansion by using switching valve mediated with the Coanda effect
ROBOMECH Journal Open Access 26 May 2022
Nature Communications Open Access 19 May 2021
Nature Communications Open Access 14 April 2021
Subscribe to Nature+
Get immediate online access to the entire Nature family of 50+ journals
Subscribe to Journal
Get full journal access for 1 year
only $3.90 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
All data are available from the corresponding authors upon reasonable request.
Rus, D. & Tolley, M. T. Design, fabrication and control of soft robots. Nature 521, 467–475 (2015).
Laschi, C., Mazzolai, B. & Cianchetti, M. Soft robotics: technologies and systems pushing the boundaries of robot abilities. Sci. Robot. 1, eaah3690 (2016).
Amjadi, M., Kyung, K.-U., Park, I. & Sitti, M. Stretchable, skin-mountable, and wearable strain sensors and their potential applications: a review. Adv. Funct. Mater. 26, 1678–1698 (2016).
Hines, L., Petersen, K., Lum, G. Z. & Sitti, M. Soft actuators for small-scale robotics. Adv. Mater. 29, 1603483 (2017).
Shintake, J., Cacucciolo, V., Floreano, D. & Shea, H. Soft robotic grippers. Adv. Mater. 30, 1707035 (2018).
Suzumori, K., Iikura, S. & Tanaka, H. Development of flexible microactuator and its applications to robotic mechanisms. In Proc. 1991 IEEE International Conf. Robotics and Automation Vol. 2, 1622–1627 (IEEE, 1991).
Suzumori, K., Wada, A. & Wakimoto, S. New mobile pressure control system for pneumatic actuators, using reversible chemical reactions of water. Sens. Actuators A 201, 148–153 (2013).
Polygerinos, P. et al. Soft robotics: review of fluid-driven intrinsically soft devices; manufacturing, sensing, control, and applications in human–robot interaction. Adv. Eng. Mater. 19, 1700016 (2017).
Keplinger, C. et al. Stretchable, transparent, ionic conductors. Science 341, 984–987 (2013).
Viry, L. et al. Flexible three-axial force sensor for soft and highly sensitive artificial touch. Adv. Mater. 26, 2659–2664 (2014).
Rosset, S. & Shea, H. R. Small, fast, and tough: shrinking down integrated elastomer transducers. Appl. Phys. Rev. 3, 031105 (2016).
Acome, E. et al. Hydraulically amplified self-healing electrostatic actuators with muscle-like performance. Science 359, 61–65 (2018).
Dong, L., Agarwal, A. K., Beebe, D. J. & Jiang, H. Adaptive liquid microlenses activated by stimuli-responsive hydrogels. Nature 442, 551–554 (2006).
Kim, Y. S. et al. Thermoresponsive actuation enabled by permittivity switching in an electrostatically anisotropic hydrogel. Nat. Mater. 14, 1002–1007 (2015).
Majidi, C., Kramer, R. & Wood, R. J. A non-differential elastomer curvature sensor for softer-than-skin electronics. Smart Mater. Struct. 20, 105017 (2011).
Cooper, C. B. et al. Stretchable capacitive sensors of torsion, strain, and touch using double helix liquid metal fibers. Adv. Funct. Mater. 27, 1605630 (2017).
Pan, C. et al. Visually imperceptible liquid-metal circuits for transparent, stretchable electronics with direct laser writing. Adv. Mater. 30, 1706937 (2018).
Besse, N., Rosset, S., Zarate, J. J. & Shea, H. Flexible active skin: large reconfigurable arrays of individually addressed shape memory polymer actuators. Adv. Mater. Technol. 2, 1700102 (2017).
Ramos, A. Electrokinetics and Electrohydrodynamics in Microsystems (Springer, 2011).
Iverson, B. D. & Garimella, S. V. Recent advances in microscale pumping technologies: a review and evaluation. Microfluid. Nanofluidics 5, 145–174 (2008).
Pearson, M. & Seyed-Yagoobi, J. Advances in electrohydrodynamic conduction pumping. IEEE Trans. Dielectr. Electr. Insul. 16, 424–434 (2009).
Darabi, J. & Wang, H. Development of an electrohydrodynamic injection micropump and its potential application in pumping fluids in cryogenic cooling systems. J. Microelectromech. Syst. 14, 747–755 (2005).
Chang, S. T., Paunov, V. N., Petsev, D. N. & Velev, O. D. Remotely powered self-propelling particles and micropumps based on miniature diodes. Nat. Mater. 6, 235–240 (2007).
Kim, J. W., Suzuki, T., Yokota, S. & Edamura, K. Tube-type micropump by using electro-conjugated fluid (ECF). Sens. Actuators A 174, 155–161 (2012).
Cacucciolo, V., Shigemune, H., Cianchetti, M., Laschi, C. & Maeda, S. Conduction electrohydrodynamics with mobile electrodes: a novel actuation system for untethered robots. Adv. Sci. 4, 1600495 (2017).
Wehner, M. et al. Pneumatic energy sources for autonomous and wearable soft robotics. Soft Robot. 1, 263–274 (2014).
Rosset, S. & Shea, H. R. Flexible and stretchable electrodes for dielectric elastomer actuators. Appl. Phys. A 110, 281–307 (2013).
Shintake, J., Rosset, S., Schubert, B., Floreano, D. & Shea, H. Versatile soft grippers with intrinsic electroadhesion based on multifunctional polymer actuators. Adv. Mater. 28, 231–238 (2016).
Wehner, M. et al. An integrated design and fabrication strategy for entirely soft, autonomous robots. Nature 536, 451–455 (2016).
Laser, D. J. & Santiago, J. G. A review of micropumps. J. Micromech. Microeng. 14, R35–R64 (2004).
Wang, Y.-N. & Fu, L.-M. Micropumps and biomedical applications: a review. Microelectron. Eng. 195, 121–138 (2018).
Rosset, S., Araromi, O. A., Schlatter, S. & Shea, H. R. Fabrication process of silicone-based dielectric elastomer actuators. J. Vis. Exp. 108, 53423 (2016).
Schlatter, S., Illenberger, P. & Rosset, S. Peta-pico-Voltron: an open-source high voltage power supply. HardwareX 4, e00039 (2018).
MGD 1000S specification. Available at https://www.micropumps.co.uk/TCSMGD1000range.htm
McMaster-Carr single tank portable air compressor specification. Available at: https://www.mcmaster.com/9965k62
Olsson, A., Enoksson, P., Stemme, G. & Stemme, E. Micromachined flat-walled valveless diffuser pumps. J. Microelectromech. Syst. 6, 161–166 (1997).
Jang, L.-S. et al. A stand-alone peristaltic micropump based on piezoelectric actuation. Biomed. Microdevices 9, 185–194 (2007).
Lei, K. F. et al. A vortex pump-based optically-transparent microfluidic platform for biotech and medical applications. Proc. Inst. Mech. Eng. H 221, 129–141 (2007).
Kawun, P., Leahy, S. & Lai, Y. A thin PDMS nozzle/diffuser micropump for biomedical applications. Sens. Actuators A 249, 149–154 (2016).
Richter, A., Plettner, A., Hofmann, K. A. & Sandmaier, H. A micromachined electrohydrodynamic (EHD) pump. Sens. Actuators A 29, 159–168 (1991).
Ahn, S.-H. & Kim, Y.-K. Fabrication and experiment of a planar micro ion drag pump. Sens. Actuators A 70, 1–5 (1998).
Chen, L., Wang, H., Ma, J., Wang, C. & Guan, Y. Fabrication and characterization of a multi-stage electroosmotic pump for liquid delivery. Sens. Actuators B 104, 117–123 (2005).
Chen, C.-H. & Santiago, J. G. A planar electroosmotic micropump. J. Microelectromech. Syst. 11, 672–683 (2002).
Zengerle, R., Ulrich, J., Kluge, S., Richter, M. & Richter, A. A bidirectional silicon micropump. Sens. Actuators A Phys. 50, 81–86 (1995).
Homsy, A., Linder, V., Lucklum, F. & de Rooij, N. F. Magnetohydrodynamic pumping in nuclear magnetic resonance environments. Sens. Actuators B 123, 636–646 (2007).
Ashouri, M., Shafii, M. B. & Moosavi, A. Theoretical and experimental studies of a magnetically actuated valveless micropump. J. Micromech. Microeng. 27, 015016 (2016).
Tanaka, Y., Noguchi, Y., Yalikun, Y. & Kamamichi, N. Earthworm muscle driven bio-micropump. Sens. Actuators B 242, 1186–1192 (2017).
Van de Pol, F. C. M., Van Lintel, H. T. G., Elwenspoek, M. & Fluitman, J. H. J. A thermopneumatic micropump based on micro-engineering techniques. Sens. Actuators A 21, 198–202 (1990).
Sim, W. Y., Yoon, H. J., Jeong, O. C. & Yang, S. S. A phase-change type micropump with aluminum flap valves. J. Micromech. Microeng. 13, 286–294 (2003).
Jung, J.-Y. & Kwak, H.-Y. Fabrication and testing of bubble powered micropumps using embedded microheater. Microfluid. Nanofluidics 3, 161–169 (2007).
Shaegh, S. A. M. et al. Plug-and-play microvalve and micropump for rapid integration with microfluidic chips. Microfluid. Nanofluidics 19, 557–564 (2015).
Jeong, O. C., Park, S. W., Yang, S. S. & Pak, J. J. Fabrication of a peristaltic PDMS micropump. Sens. Actuators A 123–124, 453–458 (2005).
Jahanshahi, A., Axisa, F. & Vanfleteren, J. Fabrication of an implantable stretchable electro-osmosis pump. In Microfluidics, BioMEMS, and Medical Microsystems IX 7929, 79290R (International Society for Optics and Photonics, 2011).
Stergiopulos, C., Vogt, D., Tolley, M. & Wehner, M. A soft combustion-driven pump for soft robots. Proc. ASME 2014 Conference on Smart Materials, Adaptive Structures and Intelligent Systems SMASIS2014, 1–6 (2014).
Mac Murray, B. C. et al. Poroelastic foams for simple fabrication of complex soft robots. Adv. Mater. 27, 6334–6340 (2015).
Loepfe, M., Schumacher, C. M. & Stark, W. J. Design, performance and reinforcement of bearing-free soft silicone combustion-driven pumps. Ind. Eng. Chem. Res. 53, 12519–12526 (2014).
We thank H. Shigemune for discussions about EHD, M. Imboden for assistance with the thermal regulation experiments and O. Gudozhnik for developing the 5 kV and 6 kV supplies. We acknowledge financial support from JSPS KAKENHI under grants 16H04306, 18H05473 and 19H05328; MEXT/JSPS under Leading Initiative for Excellent Young Researchers; Swiss National Science Foundation through NCCR Robotics; Japanese TOBITATE! Young Ambassador Program; Hasler Foundation Cyber-Human Systems programme; and the BioRobotics Institute of Scuola Superiore Sant’Anna, Pisa for funding V.C.’s initial stay at EPFL in 2016.
V.C., J.S., S.M., D.F. and H.S declare financial interest in form of a patent application. Y.K. declares no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data figures and tables
Extended Data Fig. 1 The two different electrode geometries and corresponding electrohydrodynamic (EHD) mechanisms used in this work.
a, Conduction pumping, with inclined capacitors. Heterocharge layers form near the electrodes. These layers are characterized by a higher concentration of ions of opposite polarity with respect to the nearest electrode. As a consequence, these ions are attracted to the nearest electrode, where they discharge. The inclined geometry of the capacitors allows net flow thanks to the in-flow component of the electric field near to the electrode surface. b, Charge injection, with interdigitated electrodes. When the electric field is high enough to overcome the energy barrier, field emission takes place, with electrons tunnelling from the cathode into the dielectric liquid. The generated ions are accelerated by the electric field until they discharge at the anode, transferring momentum to neutral liquid molecules along the way.
a, Fabrication process for the C pump. i, The fabrication of the electrode layers starts by blade-casting a carbon-based electrode membrane with a thickness of 30 μm on a poly(ethylene terephthalate) (PET) support, which is then cured at 80 °C for 2 h. ii, A 400 μm PDMS membrane is cast on the top of the electrode and cured at 80 °C for 1 h. iii, The sample is turned over to expose the electrode membrane, which is then processed (iv) by laser engraving to define the interdigitated pattern. This process allows the manufacturing of many samples in parallel, up to 24 samples with our equipment at EPFL-LMTS. The central photo shows eight sets of interdigitated electrodes at this stage. v, The channel layer, consisting of a 500-μm-thick laser-cut PDMS membrane, is bonded to the bottom electrode layer by a silicone adhesive film. vi, The top electrode layer, with two laser-cut holes for fluidic connection, is bonded on the top of the channel layer. vii, The PET supports are removed, and the C stretchable pump, shown in the bottom photo, is ready to use. b, Fabrication process for the Ag pump. i, The fabrication starts by blade-casting and curing (80 °C, 1 h) a 400 μm PDMS membrane. ii, On the PDMS, a silver-based stretchable ink is printed through a 23-μm-thick Mylar mask and cured at 80 °C for 3 h. iii, After removal of the mask, the bottom electrode layer is bonded to the 500-μm-thick channel layer with a silicone adhesive film. iv, The top electrode layer, with two laser-cut holes for fluidic connection, is bonded on the top of the channel layer. v, The PET supports are removed, and the Ag stretchable pump is ready to use.
Extended Data Fig. 3 Four generations of stretchable pumps plotting generated pressure vs. applied voltage.
The ‘inclined 1’ and ‘inclined 2’ generations have inclined capacitors as the electrode configuration. Inclined 2 is a scaled version of inclined 1, with half the channel size, half the gap between opposite electrodes and many more electrode pairs (43 rather than 5). The interdigitated generations have the same channel size and gap between opposite electrodes as inclined 2 but use interdigitated electrodes rather than inclined capacitors. The C version has laser-engraved carbon-silicone composite electrodes and uses 3M Novec 7100 as the dielectric fluid. The Ag version has mask-printed silver-based electrodes and uses 3M Fluorinert FC-40 as the dielectric fluid. The Ag devices can sustain higher fields than the C devices, thanks to the different dielectric liquid and to the different electrode fabrication method.
This custom-made power supply is based on an EMCO d.c.–d.c. converter from XP-power (https://www.xppower.com/Product/A-Series) and includes a microcontroller to programme the output. Dimensions are 5 cm × 4 cm × 0.8 cm. In this work, we also used a 6 kV, 20 g version. For a given voltage, pump performance is the same when driven by these low-mass power supplies or by larger laboratory power supplies, because the current draw from the pumps is far less than the maximum current that the d.c.–d.c. converter can supply.
The data shown in Fig. 2f were taken using these three pumps connected in series to increase pressure. Alternatively, pumps could be connected in parallel for higher flow rate. Each pump is 7.5 cm long.
Stretchable pump stretched and twisted. The stretchable pump is made of a transparent elastomer (Dow Corning Sylgard 184 PDMS) and stretchable electrodes (carbon- or silver-based). The video shows a pump being extensively and repeatedly deformed without damage.
Untethered operation of a stretchable pump inflating a heart-shaped balloon. The video shows a stretchable pump pushing liquid between two ventricles of a heart-shaped balloon (see final states in Fig. 1d). Each side of the pump is connected to one ventricle of the balloon, which is filled with Fluorinert FC-40 dielectric liquid. When a voltage of +6 kV is applied, the pump starts displacing liquid from the left ventricle of the balloon towards the right one. The microphone is on to show that the stretchable pump operates silently. 31 seconds after starting with equal volumes on both sides, the volume of the right-hand side ventricle is double that of the left-hand one. The pump is powered by a 20 g untethered power supply (including rechargeable battery, microcontroller, USB connector, and dc-dc converter, see Extended Data Fig. 4), showing the portability of this technology despite the high voltages used.
Active wearable for thermal regulation using a stretchable pump embedded in a glove. We developed a wearable device illustrating active thermal regulation on the human body by integrating a stretchable pump and a flexible fluidic circuit in a textile glove. The scope of the device is to transport heat to a different part of the body (in this case, from forearm to hand) by circulating the liquid through a serpentine. The heat in our experiment is generated by a flexible-foil heater mounted on the forearm. This heater simulates the generation of heat by the human body (e.g., during intense physical activity). Thanks to its low mass (1g) and compliance, the pump can be sewn on the glove and does not interfere with the wrist movements. We used an infrared camera to map the temperature. The video shows that when the heater is on and the pump is off, the heater reaches an average steady state temperature of 45 °C. Once the pump is activated, it pushes cold liquid into the serpentine on the heater from one side (top side in the movie) and extracts hot liquid from the other side (bottom side in the movie). The hot liquid cools down when circulating through the cooling serpentine on the glove and is pumped back to the heater. As a consequence, the pump cools down the heater to an average temperature of 42 °C. Thanks to its low power consumption, the pump does not heat-up the fluid circulating through it.
Self-contained fluidic muscles. This demonstration shows a fluidic muscle composed of a bending fluidic actuator with a stretchable pump integrated in its bottom layer. The inlet of the pump is connected to a fluidic reservoir on the back of the actuator, while its outlet is connected to the bellows-shaped active chamber. The actuator is filled with dielectric liquid before its activation and then the inlet tube is sealed. When a voltage is applied, the pump pushes the fluid from the reservoir to the bellows-shaped chamber, whose inflation causes bending of the actuator. Higher values of the voltage lead to higher bending angles. The values of the voltage required to activate the stretchable pump are higher in this configuration compared to the characterization experiments. The reason for this is that the pre-pressurization deforms slightly the pump, increasing the gap between each electrode pair. The experiment is conducted on a lubricated horizontal surface to minimize the effects of gravity and friction.
About this article
Cite this article
Cacucciolo, V., Shintake, J., Kuwajima, Y. et al. Stretchable pumps for soft machines. Nature 572, 516–519 (2019). https://doi.org/10.1038/s41586-019-1479-6
Switching control of latex balloon expansion by using switching valve mediated with the Coanda effect
ROBOMECH Journal (2022)
Nature Reviews Materials (2022)
High-Temperature-Tolerant Artificial Muscles Using Poly(p-phenylene benzobisoxazole) Composite Yarns
Advanced Fiber Materials (2022)
Flexible and wearable BaTiO3/polyacrylonitrile-based piezoelectric sensor for human posture monitoring
Science China Technological Sciences (2022)
Nature Communications (2021)