Review Article

Chemical recycling of waste plastics for new materials production

  • Nature Reviews Chemistry 1, Article number: 0046 (2017)
  • doi:10.1038/s41570-017-0046
  • Download Citation
Published online:

Abstract

Once referred to as ‘materials of 1,000 uses’, plastics meet demands in everything from clothing and automotive sectors to the manufacturing of medical equipment and electronics. Concomitant with usage, worldwide generation of plastic solid waste increases daily and is currently around 150 million tonnes per annum. Although recycled materials may have physical properties similar to those of virgin plastics, the resulting monetary savings are limited and the properties of most plastics are significantly compromised after a number of processing cycles. An alternative approach to processing plastic solid waste is chemical recycling, the success of which relies on the affordability of processes and the efficiency of catalysts. In this Review, we describe technologies available for sorting and recycling plastic solid waste into feedstocks, as well as state-of-the-art techniques to chemically recycle commercial plastics. These evaluations are followed by a survey of recent advances in the design of new high-performing recyclable polymers.

  • Subscribe to Nature Reviews Chemistry for full access:

    $99

    Subscribe

Additional access options:

Already a subscriber?  Log in  now or  Register  for online access.

References

  1. 1.

    et al. Recycling of plastic solid waste: a state of art review and future application. Composites B 115, 409–422 (2016).

  2. 2.

    Environmental Protection Agency. Plastics. EPA (2015).

  3. 3.

    PlasticsEurope. Plastics — the facts 2016. An analysis of European plastics production, demand and waste data. PlasticsEurope (2016).

  4. 4.

    Environmental Protection Agency. Energy impacts. EPA (2015). This number reflects cumulative values for mixed plastic waste, HDPE and PET combined. One barrel of crude oil is 5,535,600 BTU.

  5. 5.

    , , & Accumulation and fragmentation of plastic debris in global environments. Phil. Trans. R. Soc. B 364, 1985–1998 (2009).

  6. 6.

    et al. Plastic waste inputs from land into the ocean. Science 347, 768–771 (2015).

  7. 7.

    Catalyst: design challenges for the future of plastics recycling. Chem 1, 813–815 (2016).

  8. 8.

    Recycling by the numbers: the truth about recycling. Popular Mechanics (2008).

  9. 9.

    Recycling versus incineration: an energy conservation analysis. J. Hazard. Mater. 47, 277–293 (1996).

  10. 10.

    , , & The W2Plastics project: exploring the limits of polymer separation. Open Waste Manage. J. 3, 90–98 (2010).

  11. 11.

    Handbook of Plastics Recycling (Rapra, 2002).

  12. 12.

    On the brink of a recycling revolution? Proc. Natl Acad. Sci. USA 114, 612–616 (2017).

  13. 13.

    Mechanized and recovery system for solid waste. US Patent 9061289 (2015).

  14. 14.

    , & Primary thermal degradation mechanisms of PET and PBT. Polym. Degrad. Stab. 42, 13–28 (1993).

  15. 15.

    , , & Recycling of PET wastes using electron beam radiations and preparation of polyurethane coatings using recycled material. Prog. Org. Coat. 107, 54–63 (2017).

  16. 16.

    et al. Method for recycling PET bottle. US Patent 7462649 (2008).

  17. 17.

    , , & Hydrolysis of waste polyethylene terephthalate and characterization of products by differential scanning calorimetry. Thermochim. Acta 404, 193–205 (2003).

  18. 18.

    et al. Depolymerization of polyethylene terephthalate in supercritical methanol. J. Phys. Condens. Matter 14, 11427–11430 (2002).

  19. 19.

    , , & Methanolysis of polyethylene terephthalate (PET) in the presence of aluminium triisopropoxide catalyst to form dimethyl terephthalate and ethylene glycol. Polym. Degrad. Stab. 79, 529–533 (2003).

  20. 20.

    Improved polyethylene terephthalate decontamination. WO Patent 1995027753A1 (1995).

  21. 21.

    The method for de-colorization of polyethylene terephthalate pet waste. WO Patent 2016159800A1 (2016).

  22. 22.

    et al. Organocatalytic depolymerization of poly(ethylene terephthalate). J. Polym. Sci. A 49, 1273–1281 (2011).

  23. 23.

    et al. Advanced chemical recycling of poly(ethylene terephthalate) through organocatalytic aminolysis. Polym. Chem. 4, 1610–1616 (2013).

  24. 24.

    et al. Hybrid poly(aryl ether sulfone amide)s for advanced thermoplastic composites. Macromol. Chem. Phys. 215, 2260–2267 (2014).

  25. 25.

    , & Recycling of post-used PE packaging film using the restabilization technique. Polym. Degrad. Stab. 70, 189–197 (2000).

  26. 26.

    , , & Polyamide-6/high-density polyethylene blend using recycled high-density polyethylene as compatibilizer: morphology, mechanical properties, and thermal stability. Polym. Eng. Sci. 49, 2005–2014 (2009).

  27. 27.

    , , , & The effect of extensive mechanical recycling on the properties of low density polyethylene. Polym. Degrad. Stab. 97, 2262–2272 (2012).

  28. 28.

    , & Degradation of polyethylene during extrusion. II. Degradation of low-density polyethylene, linear low-density polyethylene, and high-density polyethylene in film extrusion. J. Appl. Polym. Sci. 91, 1525–1537 (2004).

  29. 29.

    Handbook of Polypropylene and Polypropylene Composites (Marcel Dekker, 2003).

  30. 30.

    & Preparation of recycled polypropylene/organophilic modified layered silicates nanocomposites part I: the recycling process of polypropylene and the mechanical properties of recycled polypropylene/organoclay nanocomposites. J. Reinf. Plast. Compos. 27, 1983–2000 (2008).

  31. 31.

    , , , & The depolymerization of polymethylene and polyethylene. J. Am. Chem. Soc. 76, 3430–3437 (1954).

  32. 32.

    , , , & Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags. Fuel Process. Technol. 122, 79–90 (2014).

  33. 33.

    , , & Fuels by pyrolysis of waste plastics from agricultural and packaging sectors in a pilot scale reactor. Fuel Process. Technol. 90, 1032–1040 (2009).

  34. 34.

    , , & Estimation of pyrolysis product of LDPE degradation using different process parameters in a stirred reactor. Polyolefins J. 2, 39–47 (2015).

  35. 35.

    , , , & Chemical recycling of plastic wastes made from polyethylene (LDPE and HDPE) and polypropylene (PP). J. Hazard. Mater. 149, 536–542 (2007).

  36. 36.

    , & Depolymerization of HDPE to wax in presence of catalyst formed by homonuclear macrocyclic zirconium complex chemically bonded to alumina support. Appl. Catal. A 303, 9–17 (2006).

  37. 37.

    , , & Catalytic cracking of LDPE dissolved in benzene using nickel-impregnated zeolites. Ind. Eng. Chem. Res. 55, 2543–2555 (2016).

  38. 38.

    , , & Wax formation in the pyrolysis of polyolefins in a conical spouted bed reactor. Energy Fuels 16, 1429–1437 (2002).

  39. 39.

    , & Degradation of polyethylene and polypropylene into fuel oil by using solid acid and non-acid catalysts. J. Anal. Appl. Pyrolysis 51, 135–155 (1999).

  40. 40.

    & Chemical catalysed recycling of waste polymers: catalytic conversion of polypropylene into fuels and chemicals over spent FCC catalyst in a fluidised-bed reactor. Polym. Degrad. Stab. 92, 813–821 (2007).

  41. 41.

    & Temperature-programmed co-pyrolysis of Turkish lignite with polypropylene. J. Anal. Appl. Pyrolysis 65, 207–219 (2002).

  42. 42.

    et al. in Material Recycling — Trends and Perspectives Ch. 1 (ed. Achilias, D.) 6–7 (InTech, 2012).

  43. 43.

    , & Depolymerization of polypropylene in an induction-coupled plasma (ICP) reactor. Ind. Eng. Chem. Res. 39, 1171–1176 (2000).

  44. 44.

    , , , & Efficient and selective degradation of polyethylenes into liquid fuels and waxes under mild conditions. Sci. Adv. 2, e1501591 (2016).

  45. 45.

    & Recycling of PVC wastes. Polym. Degrad. Stab. 96, 404–415 (2011).

  46. 46.

    , , , & Thermal degradation of PVC: a review. Waste Manage. 48, 300–314 (2016).

  47. 47.

    , & A study of the products of PVC thermal degradation. Polym. Degrad. Stab. 49, 181–191 (1995).

  48. 48.

    , , & Mechanism of the thermal degradation of poly(vinyl chloride). J. Polym. Sci. Polym. Symp. 42, 1347–1361 (1973).

  49. 49.

    , , , & Catalytic stepwise pyrolysis of packaging plastic waste. J. Anal. Appl. Pyrolysis 96, 54–62 (2012).

  50. 50.

    , , & Estimation of mechanochemical dechlorination rate of poly(vinyl chloride). Environ. Sci. Technol. 36, 1344–1348 (2002).

  51. 51.

    & Process for the solvent treatment of a plastic. WO Patent 2005100461A1 (2005).

  52. 52.

    Chemical Safety Facts. Polystyrene. Chemical Safety Facts (2014).

  53. 53.

    Polystyrene: Synthesis, Production and Applications 5 (Rapra, 2000).

  54. 54.

    Making and using an expanded plastic. New Sci. 240, 706–707 (1961).

  55. 55.

    , & Tertiary recycling of waste polystyrene using magnesium impregnated catalysts into valuable products. J. Anal. Appl. Pyrolysis 114, 163–171 (2015).

  56. 56.

    et al. Catalytic decomposition of polystyrene. The role of acid and basic active centers. Appl. Catal. B 129, 236–246 (2013).

  57. 57.

    et al. Chemical recycling of waste polystyrene into styrene over solid acids and bases. Ind. Eng. Chem. Res. 34, 4514–4519 (1995).

  58. 58.

    et al. Biodegradation and mineralization of polystyrene by plastic-eating mealworms: part 1. Chemical and physical characterization and isotopic tests. Environ. Sci. Technol. 49, 12080–12086 (2015).

  59. 59.

    , , , & Reduction of the carbon footprint through polystyrene recycling: economical evaluation. Process Saf. Environ. Prot. 101, 144–151 (2016).

  60. 60.

    , , , & Effective polyelectrolytes synthesized from expanded polystyrene wastes. Eur. Polym. J. 38, 299–304 (2002).

  61. 61.

    , , & Degradation behaviour and recovery of bisphenol-A from epoxy resin and polycarbonate resin by liquid-phase chemical recycling. Polym. Degrad. Stab. 89, 317–326 (2005).

  62. 62.

    , , , & Computational and experimental investigations of one-step conversion of poly(carbonate)s into value-added poly(aryl ether sulfone)s. Proc. Natl Acad. Sci. USA 113, 7722–7726 (2016).

  63. 63.

    & The photo-degradation of polymethylmethacrylate. I. The mechanism of degradation. Proc. R. Soc. Lond. A 210, 461–481 (1952).

  64. 64.

    Thermal Degradation of Poly(methyl methacrylate) in Solution in Various Solvents. Thesis, Univ. Missouri (1965).

  65. 65.

    , , & Method for preparing pure nylon 6 from nylon 6 waste as raw material. CN Patent 105367818 (2016).

  66. 66.

    , & Recycling nylon 6 carpet to caprolactam. Polym. Plast. Technol. Eng. 38, 471–484 (1999).

  67. 67.

    , & Molecular weight distribution and mass changes during polyamide hydrolysis. Polymer 39, 1375–1380 (1998).

  68. 68.

    Monomer Recovery from Nylon via Reactive Extrusion. Thesis, Georgia Inst. Technol. (2008).

  69. 69.

    , & Energy intensity and environmental analysis of mechanical recycling of carbon fibre composite. J. Cleaner Prod. 81, 46–50 (2014).

  70. 70.

    et al. Characterisation of carbon fibres recycled from carbon fibre/epoxy resin composites using supercritical n-propanol. Compos. Sci. Technol. 69, 192–198 (2009).

  71. 71.

    , , , & Recycling treatment of carbon fibre/epoxy composites: materials recovery and characterization and environmental impacts through life cycle assessment. Composites Part B 104, 17–25 (2016).

  72. 72.

    , , & Reinforced composite and method for recycling the same. WO Patent 2013007128A1 (2013).

  73. 73.

    , , & Radical alternating copolymerization of twisted 1,3-butadienes with maleic anhydride as a new approach for degradable thermosetting resin. Macromolecules 47, 6619–6626 (2014).

  74. 74.

    et al. Synthesis, characterization, and cross-linking strategy of a quercetin-based epoxidized monomer as a naturally-derived replacement for BPA in epoxy resins. ChemSusChem 9, 2135–2142 (2016).

  75. 75.

    , & Sustainability assessments of bio-based polymers. Polym. Degrad. Stab. 98, 1898–1907 (2013).

  76. 76.

    , , , & Dynamic covalent chemistry. Angew. Chem. Int. Ed. 41, 898–952 (2002).

  77. 77.

    , & Dynamic covalent polymers: reorganizable polymers with dynamic covalent bonds. Prog. Polym. Sci. 34, 581–604 (2009).

  78. 78.

    , , & Degradable epoxy resins prepared from diepoxide monomer with dynamic covalent disulfide linkage. Polymer 82, 319–326 (2016).

  79. 79.

    et al. Self-assembly of a ‘double dynamic covalent’ amphiphile featuring a glucose-responsive imine bond. Chem. Commun. (Camb.) 52, 6981–6984 (2016).

  80. 80.

    et al. Self-healing alginate–gelatin biohydrogels based on dynamic covalent chemistry: elucidation of key parameters. Mater. Chem. Front. 1, 73–80 (2017).

  81. 81.

    , , & Making insoluble polymer networks malleable via olefin metathesis. J. Am. Chem. Soc. 134, 8424–8427 (2012).

  82. 82.

    et al. A thermally re-mendable cross-linked polymeric material. Science 295, 1698–1702 (2002).

  83. 83.

    & Mendable polymers. J. Mater. Chem. 18, 41–62 (2008).

  84. 84.

    , , & Photoinduced plasticity in cross-linked polymers. Science 308, 1615–1617 (2005).

  85. 85.

    , & A thermodynamic polymer cross-linking system based on radically exchangeable covalent bonds. Macromolecules 39, 2121–2125 (2006).

  86. 86.

    , , & Self-assembly of supra-amphiphile of azobenzene-galactopyranoside based on dynamic covalent bond and its dual responses. Chin. Chem. Lett. 27, 1740–1744 (2016).

  87. 87.

    et al. Self-healing hyperbranched poly(aroyltriazole)s. Sci. Rep. 3, 1093–1098 (2013).

  88. 88.

    et al. Dynamic covalent chemistry-based sensing: pyrenyl derivatives of phenylboronic acid for saccharide and formaldehyde. Sci. Rep. 6, 31187–31195 (2016).

  89. 89.

    et al. Supramolecular motifs in dynamic covalent PEG-hemiaminal organogels. Nat. Commun. 6, 7417 (2015).

  90. 90.

    et al. Developments in dynamic covalent chemistries from the reaction of thiols with hexahydrotriazines. J. Am. Chem. Soc. 137, 14248–14251 (2015).

  91. 91.

    , , & Functional soft materials from metallopolymers and metallosupramolecular polymers. Nat. Mater. 10, 176–188 (2011).

  92. 92.

    , , & A modular construction kit for supramolecular polymer gels. Polym. Chem. 4, 2515–2527 (2013).

  93. 93.

    , , & Self-healing mussel-inspired multi-pH-responsive hydrogels. Biomacromolecules 14, 297–301 (2013).

  94. 94.

    et al. Synthesis, self-assembly and reversible healing of supramolecular perfluoropolyethers. J. Polym. Sci. A: Polym. Chem. 51, 3598–3606 (2013).

  95. 95.

    , , & Self-healing and thermoreversible rubber from supramolecular assembly. Nature 451, 977–980 (2008).

  96. 96.

    , , & Design, synthesis and computational modelling of aromatic tweezer-molecules as models for chain-folding polymer blends. Tetrahedron 64, 8346–8354 (2008).

  97. 97.

    , , , & Healable supramolecular polymers. Polym. Chem. 4, 4860–4870 (2013).

  98. 98.

    , , & Silica-like malleable materials from permanent organic networks. Science 344, 965–968 (2011).

  99. 99.

    , , , & Mechanically activated, catalyst-free polyhydroxyurethane vitrimers. J. Am. Chem. Soc. 137, 14019–14022 (2015).

  100. 100.

    , & Curing and viscoelasticity of vitrimers. Soft Matter 13, 258–268 (2017).

  101. 101.

    , , & Acid-catalyzed degradation mechanism of poly(phthalaldehyde): unzipping reaction of chemical amplification resist. J. Polym. Sci. A: Polym. Chem. 35, 77–89 (1997).

  102. 102.

    , , & Polyglyoxylates: a versatile class of triggerable self-immolative polymers from readily accessible monomers. J. Am. Chem. Soc. 136, 10116–10123 (2014).

  103. 103.

    , , & Self-immolative polymers. J. Am. Chem. Soc. 130, 5434–5435 (2008).

  104. 104.

    , & Self-immolative polymers containing rapidly cyclizing spacers: toward rapid depolymerization rates. Macromolecules 45, 7364–7374 (2012).

  105. 105.

    et al. Programmed photodegradation of polymeric/oligomeric materials derived from renewable bioresources. Angew. Chem. Int. Ed. 54, 1159–1163 (2015).

  106. 106.

    & Completely recyclable biopolymers with linear and cyclic topologies via ring-opening polymerization of γ-butyrolactone. Nat. Chem. 8, 42–49 (2016).

  107. 107.

    , , , & Depolymerizable poly(benzyl ether)-based materials for selective room temperature recycling. Green Chem. 17, 4541–4545 (2015).

  108. 108.

    & Covalent adaptable networks: smart, reconfigurable and responsive network systems. Chem. Soc. Rev. 42, 7161–7173 (2013).

  109. 109.

    , , & Use of Diels–Alder chemistry for thermoreversible cross-linking of rubbers: the next step toward recycling of rubber products? Macromolecules 48, 7096–7105 (2015).

  110. 110.

    et al. Recyclable, strong thermosets and organogels via paraformaldehyde condensation with diamines. Science 344, 732–735 (2014).

  111. 111.

    et al. Re-healable polyimine thermosets: polymer composition and moisture sensitivity. Polym. Chem. 7, 7052–7056 (2016).

  112. 112.

    et al. Repairable woven carbon fiber composites with full recyclability enabled by malleable polyimine networks. Adv. Mater. 28, 2904–2909 (2016).

  113. 113.

    & Hydrolyzable polyureas bearing hindered urea bonds. J. Am. Chem. Soc. 136, 16974–16977 (2014).

  114. 114.

    , & The modelling of the separation process in a ferrohydrostatic separator. Miner. Eng. 18, 449–457 (2005).

  115. 115.

    , & Upgrading mixed polyolefin waste with magnetic density separation. Waste Manage. 29, 1712–1717 (2009).

  116. 116.

    , , & Electrostatic separation and recovery of mixed plastics. P2RIC InfoHouse (1999).

  117. 117.

    et al. Electrostatic separators of particles: application to plastic/metal, metal/metal and plastic/plastic mixtures. Waste Manage. 29, 228–232 (2009).

  118. 118.

    Application of the critical surface tension concept to items in our everyday life. J. Adhes. 9, 135–140 (1978).

  119. 119.

    , , , & Recycling-oriented characterization of polyolefin packaging waste. Waste Manage. 33, 574–584 (2013).

  120. 120.

    & Identification of different kinds of plastics using laser-induced breakdown spectroscopy for waste management. J. Environ. Sci. Health A Tox. Hazard. Subst. Environ. Eng. 42, 1989–1997 (2007).

  121. 121.

    & Ultrasound for monitoring and quality inspection in MDS plastics recycling. International Solid Waste Association (2009).

Download references

Acknowledgements

The authors thank C. H. Fox for insights and discussions.

Author information

Affiliations

  1. IBM Research-Almaden, Chemistry and Materials, 650 Harry Road, San Jose, California 95120, USA.

    • AliReza Rahimi
    •  & Jeannette M. García

Authors

  1. Search for AliReza Rahimi in:

  2. Search for Jeannette M. García in:

Competing interests

The authors declare no competing interests.

Corresponding author

Correspondence to Jeannette M. García.