The quadratic optical nonlinearity arising from two-photon absorption provides the crucial spatial concentration of optical excitation in three-dimensional (3D) laser nanoprinting, with widespread applications in technical and life sciences. Femtosecond lasers allow for obtaining efficient two-photon absorption but are accompanied by a number of issues, including higher-order processes, cost, reliability and size. Here we introduce two-step absorption replacing two-photon absorption as the primary optical excitation process. Under suitable conditions, two-step absorption shows the same quadratic optical nonlinearity as two-photon absorption. We present a photoresist system based on a photoinitiator supporting two-step absorption, a scavenger and a well-established triacrylate. We show that this system allows for printing state-of-the-art 3D nanostructures and beyond. In these experiments, we use ~100 μW optical power from an inexpensive, compact continuous-wave semiconductor laser diode emitting at 405 nm wavelength. Our work opens the door to drastic miniaturization and cost reduction of 3D laser nanoprinters.
This is a preview of subscription content, access via your institution
Open Access articles citing this article.
Nature Communications Open Access 27 February 2023
Nature Communications Open Access 26 May 2022
Access Nature and 54 other Nature Portfolio journals
Get Nature+, our best-value online-access subscription
$29.99 / 30 days
cancel any time
Subscribe to this journal
Receive 12 print issues and online access
$209.00 per year
only $17.42 per issue
Rent or buy this article
Prices vary by article type
Prices may be subject to local taxes which are calculated during checkout
Göppert-Mayer, M. Über Elementarakte mit zwei Quantensprüngen. Ann. Phys. 401, 273–294 (1931).
Scully, M. O. & Zubairy, M. S. Quantum Optics (Cambridge Univ. Press, 1997).
Denk, W., Strickler, J. H. & Webb, W. W. Two-photon laser scanning fluorescence microscopy. Science 248, 73–76 (1990).
Denk, W., Piston, D. W. & Webb, W. W. Multi-photon molecular excitation in laser-scanning microscopy. in Handbook Of Biological Confocal Microscopy (ed. Pawley, J. B.) 535–549 (Springer, 2006).
Wu, E.-S., Strickler, J. H., Harrell, W. R. & Webb, W. W. Two-photon lithography for microelectronic application. In Proc. SPIE 1674, Optical/Laser Microlithography V 776–782 (International Society for Optics and Photonics, 1992).
Maruo, S., Nakamura, O. & Kawata, S. Three-dimensional microfabrication with two-photon-absorbed photopolymerization. Opt. Lett. 22, 132–134 (1997).
Baldacchini, T. (ed.) Three-Dimensional Microfabrication Using Two-Photon Polymerization 2nd edn (Elsevier, 2019).
Farsari, M. & Chichkov, B. N. Two-photon fabrication. Nat. Photon. 3, 450–452 (2009).
Gissibl, T., Thiele, S., Herkommer, A. & Giessen, H. Two-photon direct laser writing of ultracompact multi-lens objectives. Nat. Photon. 10, 554–560 (2016).
Dietrich, P.-I. et al. In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration. Nat. Photon. 12, 241–247 (2018).
Wolff, M. A. et al. Broadband waveguide-integrated superconducting single-photon detectors with high system detection efficiency. Appl. Phys. Lett. 118, 154004 (2021).
Hahn, V. et al. Rapid assembly of small materials building blocks (voxels) into large functional 3D metamaterials. Adv. Funct. Mater. 30, 1907795 (2020).
Skliutas, E. et al. Polymerization mechanisms initiated by spatio-temporally confined light. Nanophotonics 10, 1211–1242 (2021).
Kiefer, P. et al. Sensitive photoresists for rapid multiphoton 3D laser micro- and nanoprinting. Adv. Opt. Mater. 8, 2000895 (2020).
Schafer, K. J. et al. Two-photon absorption cross-sections of common photoinitiators. J. Photochem. Photobiol. Chem. 162, 497–502 (2004).
Pawlicki, M., Collins, H. A., Denning, R. G. & Anderson, H. L. Two-photon absorption and the design of two-photon dyes. Angew. Chem. Int. Ed. 48, 3244–3266 (2009).
Mueller, J. B., Fischer, J., Mange, Y. J., Nann, T. & Wegener, M. In-situ local temperature measurement during three-dimensional direct laser writing. Appl. Phys. Lett. 103, 123107 (2013).
Fischer, J. et al. Three-dimensional multi-photon direct laser writing with variable repetition rate. Opt. Express 21, 26244–26260 (2013).
Tumbleston, J. R. et al. Continuous liquid interface production of 3D objects. Science 347, 1349–1352 (2015).
Dexter, D. L. Possibility of luminescent quantum yields greater than unity. Phys. Rev. 108, 630–633 (1957).
Wegh, R. T., Donker, H., Oskam, K. D. & Meijerink, A. Visible quantum cutting in LiGdF4:Eu3+ through downconversion. Science 283, 663–666 (1999).
Burnham, D. C. & Weinberg, D. L. Observation of simultaneity in parametric production of optical photon pairs. Phys. Rev. Lett. 25, 84–87 (1970).
Fischer, J. & Wegener, M. Three-dimensional direct laser writing inspired by stimulated-emission-depletion microscopy. Opt. Mater. Express 1, 614–624 (2011).
Turro, N. J. Modern Molecular Photochemistry (University Science Books, 1991).
Flamigni, L., Barigelletti, F., Dellonte, S. & Orlandi, G. Photophysical properties of benzil in solution: triplet state deactivation pathways. J. Photochem. 21, 237–244 (1983).
Lamola, A. A. & Hammond, G. S. Mechanisms of photochemical reactions in solution. XXXIII. Intersystem crossing efficiencies. J. Chem. Phys. 43, 2129–2135 (1965).
Fang, T.-S., Brown, R. E., Kwan, C. L. & Singer, L. A. Photophysical studies on benzil. Time resolution of the prompt and delayed emissions and a photokinetic study indicating deactivation of the triplet by reversible exciplex formation. J. Phys. Chem. 82, 2489–2496 (1978).
Bückmann, T. et al. Tailored 3D mechanical metamaterials made by dip-in direct-laser-writing optical lithography. Adv. Mater. 24, 2710–2714 (2012).
Scaiano, J. C., Johnston, L. J., McGimpsey, W. G. & Weir, D. Photochemistry of organic reaction intermediates: novel reaction paths induced by two-photon laser excitation. Acc. Chem. Res. 21, 22–29 (1988).
Cáceres, T., Encinas, M. V. & Lissi, E. A. Photocleavage of benzil. J. Photochem. 27, 109–114 (1984).
Grubbs, R. B. Nitroxide-mediated radical polymerization: limitations and versatility. Polym. Rev. 51, 104–137 (2011).
Johnston, L. J., Tencer, M. & Scaiano, J. C. Evidence for hydrogen transfer in the photochemistry of 2,2,6,6-tetramethylpiperidine N-oxyl. J. Org. Chem. 51, 2806–2808 (1986).
Tatikolov, A. S., Levin, P. P., Kokrashvili, T. A. & Kuz’min, V. A. Quenching of the triplet states of carbonyl compounds by nitroxyl radicals. Russ. Chem. Bull. 32, 465–468 (1983).
Bunbury, D. L. & Chuang, T. T. Photolysis of benzil in 2-propanol and in cumene. Can. J. Chem. 47, 2045–2055 (1969).
Arnoux, C. et al. Polymerization photoinitiators with near-resonance enhanced two-photon absorption cross-section: toward high-resolution photoresist with improved sensitivity. Macromolecules 53, 9264–9278 (2020).
Malinauskas, M. et al. Ultrafast laser processing of materials: from science to industry. Light: Sci. Appl. 5, e16133 (2016).
Ikuta, K., Maruo, S. & Kojima, S. New micro stereo lithography for freely movable 3D micro structure-super IH process with submicron resolution. In Proc. MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No. 98CH36176) 290–295 (IEEE, 1998).
Thiel, M., Fischer, J., von Freymann, G. & Wegener, M. Direct laser writing of three-dimensional submicron structures using a continuous-wave laser at 532 nm. Appl. Phys. Lett. 97, 221102 (2010).
Do, M. T. et al. Submicrometer 3D structures fabrication enabled by one-photon absorption direct laser writing. Opt. Express 21, 20964–20973 (2013).
Delrot, P., Loterie, D., Psaltis, D. & Moser, C. Single-photon three-dimensional microfabrication through a multimode optical fiber. Opt. Express 26, 1766–1778 (2018).
Mueller, P., Thiel, M. & Wegener, M. 3D direct laser writing using a 405 nm diode laser. Opt. Lett. 39, 6847–6850 (2014).
Shusteff, M. et al. One-step volumetric additive manufacturing of complex polymer structures. Sci. Adv. 3, eaao5496 (2017).
Kelly, B. E. et al. Volumetric additive manufacturing via tomographic reconstruction. Science 363, 1075–1079 (2019).
Loterie, D., Delrot, P. & Moser, C. High-resolution tomographic volumetric additive manufacturing. Nat. Commun. 11, 852 (2020).
Regehly, M. et al. Xolography for linear volumetric 3D printing. Nature 588, 620–624 (2020).
Schumann, M. F. et al. Cloaked contact grids on solar cells by coordinate transformations: designs and prototypes. Optica 2, 850–853 (2015).
Urbancová, P. et al. IP-Dip-based woodpile structures for VIS and NIR spectral range: complex PBG analysis. Opt. Mater. Express 9, 4307–4317 (2019).
Frenzel, T., Kadic, M. & Wegener, M. Three-dimensional mechanical metamaterials with a twist. Science 358, 1072–1074 (2017).
We acknowledge fruitful discussions with C. Barner-Kowollik (Queensland Institute of Technology), F. Mayer (Karlsruhe Institute of Technology (KIT)), P. Müller (previously at KIT) and T. Schlöder (KIT). V.H. is presently funded by the Max Planck School of Photonics. This research has additionally been funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany’s Excellence Strategy via the Excellence Cluster ‘3D Matter Made to Order’ (EXC-2082/1-390761711), which has also been supported by the Carl Zeiss Foundation through the ‘Carl Zeiss Foundation-Focus@HEiKA’, by the State of Baden-Württemberg, and by KIT. We further acknowledge support by the Helmholtz program ‘Materials Systems Engineering (MSE)’, and by the Karlsruhe School of Optics & Photonics (KSOP) and by the Ministry of Science, Research and the Arts of Baden-Württemberg as part of the sustainability financing of the projects of the Excellence Initiative II. R.R.S. acknowledges funding from the Federal Ministry for Education and Research (BMBF) under grant no. 13N14476.
V.H., T.M. and M.W. are inventors on a patent application on two-step absorption. The authors declare no other competing interests.
Peer review information Nature Photonics thanks Paul Braun and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Hahn, V., Messer, T., Bojanowski, N.M. et al. Two-step absorption instead of two-photon absorption in 3D nanoprinting. Nat. Photon. 15, 932–938 (2021). https://doi.org/10.1038/s41566-021-00906-8
This article is cited by
Nature Communications (2023)
Nature Reviews Methods Primers (2023)
Nature Communications (2022)
Nature Photonics (2022)
Journal of Central South University (2022)