Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Hydroxypropyl cellulose photonic architectures by soft nanoimprinting lithography

Nature Photonics volume 12, pages 343–348 (2018)Cite this article

Subjects

Abstract

As contamination and environmental degradation increase, there is a huge demand for new eco-friendly materials. Despite its use for thousands of years, cellulose and its derivatives have gained renewed interest as favourable alternatives to conventional plastics, due to their abundance and lower environmental impact. Here, we report the fabrication of photonic and plasmonic structures by moulding hydroxypropyl cellulose into submicrometric periodic lattices, using soft lithography. This is an alternative way to achieve structural colour in this material, which is usually obtained by exploiting its chiral nematic phase. Cellulose-based photonic crystals are biocompatible and can be dissolved in water or not depending on the derivative employed. Patterned cellulose membranes exhibit tunable colours and may be used to boost the photoluminescence of a host organic dye. Furthermore, we show how metal coating these cellulose photonic architectures leads to plasmonic crystals with excellent optical properties acting as disposable surface-enhanced Raman spectroscopy substrates.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Fabrication procedures and water solubility tests of cellulose photonic crystal films.
Fig. 2: HPC photonic crystals.
Fig. 3: HPC plasmonic crystals.
Fig. 4: HPC plasmonic crystal membranes as SERS substrates.

Similar content being viewed by others

References

  1. Plastics—the Facts 2016 https://www.plasticseurope.org/application/files/4315/1310/4805/plastic-the-fact-2016.pdf (PlasticsEurope, 2016).

  2. Hoeng, F., Denneulin, A. & Bras, J. Use of nanocellulose in printed electronics: a review. Nanoscale 8, 13131–13154 (2016).

    Article  ADS  Google Scholar 

  3. Lagerwall, J. et al. Cellulose nanocrystal-based materials: from liquid crystal self-assembly and glass formation to multifunctional thin films. NPG Asia Mater. 6, e80 (2014).

    Article  Google Scholar 

  4. Zhu, H. et al. Wood-derived materials for green electronics, biological devices, and energy applications. Chem. Rev. 116, 9305–9374 (2016).

    Article  Google Scholar 

  5. Dumanli, A. et al. Controlled, bio-inspired self-assembly of cellulose-based chiral reflectors. Adv. Opt. Mater. 2, 646–650 (2014).

    Article  Google Scholar 

  6. Fernandes, S. et al. Mind the microgap in iridescent cellulose nanocrystal films. Adv. Mater. 29, 1603560 (2017).

    Article  Google Scholar 

  7. Águas, H. et al. Thin film silicon photovoltaic cells on paper for flexible indoor applications. Adv. Funct. Mater. 25, 3592–3598 (2015).

    Article  Google Scholar 

  8. Ha, D., Fang, Z., Hu, L. & Munday, J. Paper-based anti-reflection coatings for photovoltaics. Adv. Energy Mater. 4, 1301804 (2014).

    Article  Google Scholar 

  9. Espinha, A. et al. Shape memory cellulose-based photonic reflectors. ACS Appl. Mater. Inter. 8, 31935–31940 (2016).

    Article  Google Scholar 

  10. Wu, T. et al. A bio-inspired cellulose nanocrystal-based nanocomposite photonic film with hyper-reflection and humidity-responsive actuator properties. J. Mater. Chem. C. 4, 9687–9696 (2016).

    Article  Google Scholar 

  11. Polavarapu, L. & Liz-Marzán, L. Towards low-cost flexible substrates for nanoplasmonic sensing. Phys. Chem. Chem. Phys. 15, 5288–5300 (2013).

    Article  Google Scholar 

  12. Tian, L. et al. Bacterial nanocellulose-based flexible surface enhanced Raman scattering substrate. Adv. Mater. Interfaces 3, 1600214 (2016).

    Article  Google Scholar 

  13. Gilbert, R. & Patton, P. Liquid crystal formation in cellulose and cellulose derivatives. Prog. Polym. Sci. 9, 115–131 (1983).

    Article  Google Scholar 

  14. Werbowyj, R. & Gray, D. Liquid crystalline structure in aqueous hydroxypropyl cellulose solutions. Mol. Cryst. Liq. Cryst. 34, 97–103 (1976).

    Article  Google Scholar 

  15. Kamita, G. et al. Biocompatible and sustainable optical strain sensors for large-area applications. Adv. Opt. Mater. 4, 1950–1954 (2016).

    Article  Google Scholar 

  16. Xia, Y. & Whitesides, G. Soft lithography. Angew. Chem. Int. Ed. 37, 550–575 (1998).

    Article  Google Scholar 

  17. Espinha, A., Serrano, M., Blanco, A. & López, C. Thermoresponsive shape-memory photonic nanostructures. Adv. Opt. Mater. 2, 516–521 (2014).

    Article  Google Scholar 

  18. Worgull, M. et al. Hot embossing and thermoforming of biodegradable three-dimensional wood structures. RSC Adv. 3, 20060–20064 (2013).

    Article  Google Scholar 

  19. Mäkelä, T., Kainlauri, M., Willberg-Keyriläinen, P., Tammelin, T. & Forsström, U. Fabrication of micropillars on nanocellulose films using a roll-to-roll nanoimprinting method. Microelectron. Eng. 163, 1–6 (2016).

    Article  Google Scholar 

  20. Mäkelä, T., Haatainen, T. & Ahopelto, J. Roll-to-roll printed gratings in cellulose acetate web using novel nanoimprinting device. Microelectron. Eng. 88, 2045–2047 (2011).

    Article  Google Scholar 

  21. Werbowyj, R. & Gray, D. Optical properties of hydroxypropyl cellulose liquid crystals. I. Cholesteric pitch and polymer concentration. Macromolecules 17, 1512–1520 (1984).

    Article  ADS  Google Scholar 

  22. Odom, T., Love, J., Wolfe, D., Paul, K. & Whitesides, G. Improved pattern transfer in soft lithography using composite stamps. Langmuir 18, 5314–5320 (2002).

    Article  Google Scholar 

  23. Kabra, B., Gehrke, S. & Spontak, R. Microporous, responsive hydroxypropyl cellulose gels. 1. Synthesis and microstructure. Macromolecules 31, 2166–2173 (1998).

    Article  ADS  Google Scholar 

  24. Yang, A. et al. Unidirectional lasing from template-stripped two-dimensional plasmonic crystals. ACS Nano 9, 11582–11588 (2015).

    Article  Google Scholar 

  25. de Arquer, F., Mihi, A. & Konstantatos, G. Large-area plasmonic-crystal-hot-electron-based photodetectors. ACS Photon. 2, 950–957 (2015).

    Article  Google Scholar 

  26. James, T., Mulvaney, P. & Roberts, A. The plasmonic pixel: large area, wide gamut color reproduction using aluminum nanostructures. Nano Lett. 16, 3817–3823 (2016).

    Article  ADS  Google Scholar 

  27. Cheng, F., Gao, J., Luk, T. & Yang, X. Structural color printing based on plasmonic metasurfaces of perfect light absorption. Sci. Rep. 5, 11045 (2015).

    Article  ADS  Google Scholar 

  28. Fudouzi, H. & Xia, Y. Photonic papers and inks: color writing with colorless materials. Adv. Mater. 15, 892–896 (2003).

    Article  Google Scholar 

  29. Min, K., Kim, S., Kim, C. & Kim, S. Colored and fluorescent nanofibrous silk as a physically transient chemosensor and vitamin deliverer. Sci. Rep. 7, 5448 (2017).

    Article  ADS  Google Scholar 

  30. Espinha, A., Serrano, M., Blanco, A. & López, C. Random lasing in novel dye-doped white paints with shape memory. Adv. Opt. Mater. 3, 1080–1087 (2015).

    Article  Google Scholar 

  31. Macias, G., Alba, M., Marsal, L. & Mihi, A. Surface roughness boosts the SERS performance of imprinted plasmonic architectures. J. Mater. Chem. C. 4, 3970–3975 (2016).

    Article  Google Scholar 

  32. Bae, H. et al. Physically transient memory on a rapidly dissoluble paper for security application. Sci. Rep. 6, 38324 (2016).

    Article  ADS  Google Scholar 

  33. Hwang, S. et al. A physically transient form of silicon electronics. Science 337, 1640–1644 (2012).

    Article  ADS  Google Scholar 

  34. Tao, H. et al. Silk-based conformal, adhesive, edible food sensors. Adv. Mater. 24, 1067–1072 (2012).

    Article  Google Scholar 

  35. Luchs, J., Nelinson, D. & Macy, J. Efficacy of hydroxypropyl cellulose ophthalmic inserts (LACRISERT) in subsets of patients with dry eye syndrome: findings from a patient registry. Cornea 29, 1417–1427 (2010).

    Article  Google Scholar 

Download references

Acknowledgements

The authors acknowledge M. Simón and A. Gómez for AFM measurements. The Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged for its support through grant no. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence programme and also for its support through grant MAT2016-79053-P. A.M. was funded by a Ramón y Cajal fellowship (RYC-2014-16444). This project has received funding from the European Research Council under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 637116, ENLIGHTMENT).

Author information

Authors and Affiliations

  1. Institut de Ciència de Materials de Barcelona, Consejo Superior de Investigaciones Científicas, Barcelona, Spain

    André Espinha, Camilla Dore, Cristiano Matricardi, Maria Isabel Alonso, Alejandro R. Goñi & Agustín Mihi

  2. Institució Catalana de Recerca i Estudis Avançats, Barcelona, Spain

    Alejandro R. Goñi

Authors
  1. André Espinha
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Camilla Dore
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Cristiano Matricardi
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Maria Isabel Alonso
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Alejandro R. Goñi
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Agustín Mihi
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

A.E. and C.D. developed the concept, fabricated and characterized the samples. C.M. provided patterned PDMS moulds. A.R.G. and M.I.A. carried out photoluminescence and Raman measurements. A.E and A.M. wrote the manuscript. All authors contributed to fruitful discussions and corrected the manuscript. A.M. supervised the research.

Corresponding author

Correspondence to Agustín Mihi.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Additional information including a comparison of replica moulding and hot embossing fabrication methods, scanning electron microscopy images, micro-Raman experiments and electric field simulations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Espinha, A., Dore, C., Matricardi, C. et al. Hydroxypropyl cellulose photonic architectures by soft nanoimprinting lithography. Nature Photon 12, 343–348 (2018). https://doi.org/10.1038/s41566-018-0152-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41566-018-0152-1

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing