Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Coverage-driven selectivity switch from ethylene to acetate in high-rate CO2/CO electrolysis

Subjects

Abstract

Tuning catalyst microenvironments by electrolytes and organic modifications is effective in improving CO2 electrolysis performance. An alternative way is to use mixed CO/CO2 feeds from incomplete industrial combustion of fossil fuels, but its effect on catalyst microenvironments has been poorly understood. Here we investigate CO/CO2 co-electrolysis over CuO nanosheets in an alkaline membrane electrode assembly electrolyser. With increasing CO pressure in the feed, the major product gradually switches from ethylene to acetate, attributed to the increased CO coverage and local pH. Under optimized conditions, the Faradaic efficiency and partial current density of multicarbon products reach 90.0% and 3.1 A cm−2, corresponding to a carbon selectivity of 100.0% and yield of 75.0%, outperforming thermocatalytic CO hydrogenation. The scale-up demonstration using an electrolyser stack achieves the highest ethylene formation rate of 457.5 ml min–1 at 150 A and acetate formation rate of 2.97 g min–1 at 250 A.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: CO2/CO electrolysis performance.
Fig. 2: Morphology and structure characterization of CuO nanosheets.
Fig. 3: Feed-composition-dependent product distribution.
Fig. 4: *CO-coverage-dependent reaction pathways.
Fig. 5: Scale-up demonstration.

Similar content being viewed by others

Data availability

The data that support the findings of this study are available within the paper and the Supplementary Information. Other relevant data are available from the corresponding authors on reasonable request. Source data are provided with this paper.

References

  1. Bushuyev, O. S. et al. What should we make with CO2 and how can we make it? Joule 2, 825–832 (2018).

    CAS  Google Scholar 

  2. Masel, R. I. et al. An industrial perspective on catalysts for low-temperature CO2 electrolysis. Nat. Nanotechnol. 16, 118–128 (2021).

    CAS  Google Scholar 

  3. Arán-Ais, R. M. et al. The role of in situ generated morphological motifs and Cu(i) species in C2+ product selectivity during CO2 pulsed electroreduction. Nat. Energy 5, 317–325 (2020).

    Google Scholar 

  4. Ma, W. et al. Electrocatalytic reduction of CO2 to ethylene and ethanol through hydrogen-assisted C–C coupling over fluorine-modified copper. Nat. Catal. 3, 478–487 (2020).

    CAS  Google Scholar 

  5. Wang, J. et al. Linking the dynamic chemical state of catalysts with the product profile of electrocatalytic CO2 reduction. Angew. Chem. Int. Ed. 60, 17254–17267 (2021).

    CAS  Google Scholar 

  6. Zhang, B. et al. Highly electrocatalytic ethylene production from CO2 on nanodefective Cu nanosheets. J. Am. Chem. Soc. 142, 13606–13613 (2020).

    CAS  Google Scholar 

  7. Yin, Z. et al. An alkaline polymer electrolyte CO2 electrolyzer operated with pure water. Energy Environ. Sci. 12, 2455–2462 (2019).

    CAS  Google Scholar 

  8. Kim, C. et al. Tailored catalyst microenvironments for CO2 electroreduction to multicarbon products on copper using bilayer ionomer coatings. Nat. Energy 6, 1026–1034 (2021).

    CAS  Google Scholar 

  9. Yan, Z. et al. Improving the efficiency of CO2 electrolysis by using a bipolar membrane with a weak-acid cation exchange layer. Nat. Chem. 13, 33–40 (2021).

    CAS  Google Scholar 

  10. Monteiro, M. C. O. et al. Absence of CO2 electroreduction on copper, gold and silver electrodes without metal cations in solution. Nat. Catal. 4, 654–662 (2021).

    CAS  Google Scholar 

  11. Kim, D. et al. Selective CO2 electrocatalysis at the pseudocapacitive nanoparticle/ordered-ligand interlayer. Nat. Energy 5, 1032–1042 (2020).

    CAS  Google Scholar 

  12. Huang, J. et al. CO2 electrolysis to multicarbon products in strong acid. Science 372, 1074–1078 (2021).

    CAS  Google Scholar 

  13. Flores-Granobles, M. & Saeys, M. Minimizing CO2 emissions with renewable energy: a comparative study of emerging technologies in the steel industry. Energy Environ. Sci. 13, 1923–1932 (2020).

    CAS  Google Scholar 

  14. Birdja, Y. Y. et al. Advances and challenges in understanding the electrocatalytic conversion of carbon dioxide to fuels. Nat. Energy 4, 732–745 (2019).

    CAS  Google Scholar 

  15. Zheng, Y. et al. Understanding the roadmap for electrochemical reduction of CO2 to multi-carbon oxygenates and hydrocarbons on copper-based catalysts. J. Am. Chem. Soc. 141, 7646–7659 (2019).

    CAS  Google Scholar 

  16. Lum, Y. & Ager, J. W. Evidence for product-specific active sites on oxide-derived Cu catalysts for electrochemical CO2 reduction. Nat. Catal. 2, 86–93 (2019).

    CAS  Google Scholar 

  17. Romero Cuellar, N. S. et al. Two-step electrochemical reduction of CO2 towards multi-carbon products at high current densities. J. CO2 Util. 36, 263–275 (2020).

  18. Moradzaman, M. & Mul, G. Optimizing CO coverage on rough copper electrodes: effect of the partial pressure of CO and electrolyte anions (pH) on selectivity toward ethylene. J. Phys. Chem. C 125, 6546–6554 (2021).

    CAS  Google Scholar 

  19. Wang, X. et al. Mechanistic reaction pathways of enhanced ethylene yields during electroreduction of CO2–CO co-feeds on Cu and Cu-tandem electrocatalysts. Nat. Nanotechnol. 14, 1063–1070 (2019).

    CAS  Google Scholar 

  20. Sang, J. et al. A reconstructed Cu2P2O7 catalyst for selective CO2 electroreduction to multicarbon products. Angew. Chem. Int. Ed. 61, e202114238 (2022).

    CAS  Google Scholar 

  21. Wei, P. et al. CO2 electrolysis at industrial current densities using anion exchange membrane based electrolyzers. Sci. China Chem. 63, 1711–1715 (2020).

    CAS  Google Scholar 

  22. Kim, B. et al. Effects of composition of the micro porous layer and the substrate on performance in the electrochemical reduction of CO2 to CO. J. Power Sources 312, 192–198 (2016).

    CAS  Google Scholar 

  23. Xing, Z. et al. Enhancing carbon dioxide gas-diffusion electrolysis by creating a hydrophobic catalyst microenvironment. Nat. Commun. 12, 136 (2021).

    CAS  Google Scholar 

  24. Hansen, K. U. & Jiao, F. Hydrophobicity of CO2 gas diffusion electrodes. Joule 5, 752–767 (2021).

    Google Scholar 

  25. Wang, L. et al. Electrochemical carbon monoxide reduction on polycrystalline copper: effects of potential, pressure, and pH on selectivity toward multicarbon and oxygenated products. ACS Catal. 8, 7445–7454 (2018).

    CAS  Google Scholar 

  26. Andrew, M. et al. Carbonate and bicarbonate ion transport in alkaline anion exchange membranes. J. Electrochem. Soc. 160, F994 (2013).

    Google Scholar 

  27. Pan, X. et al. Oxide-zeolite-based composite catalyst concept that enables syngas chemistry beyond Fischer–Tropsch synthesis. Chem. Rev. 121, 6588–6609 (2021).

    CAS  Google Scholar 

  28. Rezaei, F. et al. SOx/NOx removal from flue gas streams by solid adsorbents: a review of current challenges and future directions. Energy Fuels 29, 5467–5486 (2015).

    CAS  Google Scholar 

  29. Benn, E., Gaskey, B. & Erlebacher, D. Suppression of hydrogen evolution by oxygen reduction in nanoporous electrocatalysts. J. Am. Chem. Soc. 139, 3633–3638 (2017).

    Google Scholar 

  30. Li, J. et al. Constraining CO coverage on copper promotes high-efficiency ethylene electroproduction. Nat. Catal. 2, 1124–1131 (2019).

    CAS  Google Scholar 

  31. Jouny, M., Luc, W. & Jiao, F. High-rate electroreduction of carbon monoxide to multi-carbon products. Nat. Catal. 1, 748–755 (2018).

    CAS  Google Scholar 

  32. Gunathunge, C. M. et al. Spectroscopic observation of reversible surface reconstruction of copper electrodes under CO2 reduction. J. Phys. Chem. C 121, 12337–12344 (2017).

    CAS  Google Scholar 

  33. Jiang, S. et al. New aspects of operando Raman spectroscopy applied to electrochemical CO2 reduction on Cu foams. J. Chem. Phys. 150, 041718 (2019).

    Google Scholar 

  34. Vasileff, A. et al. Electrochemical reduction of CO2 to ethane through stabilization of an ethoxy intermediate. Angew. Chem. Int. Ed. 59, 19649–19653 (2020).

    CAS  Google Scholar 

  35. Ren, D. et al. Atomic layer deposition of ZnO on CuO enables selective and efficient electroreduction of carbon dioxide to liquid fuels. Angew. Chem. Int. Ed. 58, 15036–15040 (2019).

    CAS  Google Scholar 

  36. Gunathunge, C. M. et al. Existence of an electrochemically inert CO population on Cu electrodes in alkaline pH. ACS Catal. 8, 7507–7516 (2018).

    CAS  Google Scholar 

  37. An, H. et al. Sub-second time-resolved surface enhanced Raman spectroscopy reveals dynamic CO intermediates during electrochemical CO2 reduction on copper. Angew. Chem. Int. Ed. 60, 16576–16584 (2021).

    CAS  Google Scholar 

  38. Zhan, C. et al. Revealing the CO coverage-driven C–C coupling mechanism for electrochemical CO2 reduction on Cu2O nanocubes via operando Raman spectroscopy. ACS Catal. 11, 7694–7701 (2021).

    CAS  Google Scholar 

  39. Sandberg, R. B. et al. CO–CO coupling on Cu facets: coverage, strain and field effects. Surf. Sci. 654, 56–62 (2016).

    CAS  Google Scholar 

  40. Perez-Gallent, E. et al. Spectroscopic observation of a hydrogenated CO dimer intermediate during CO reduction on Cu(100) electrodes. Angew. Chem. Int. Ed. 56, 3621–3624 (2017).

    CAS  Google Scholar 

  41. Cheng, T., Xiao, H. & Goddard, W. A. Full atomistic reaction mechanism with kinetics for CO reduction on Cu(100) from ab initio molecular dynamics free-energy calculations at 298 K. Proc. Natl Acad. Sci. USA 114, 1795–1800 (2017).

    CAS  Google Scholar 

  42. Lum, Y. et al. Electrochemical CO reduction builds solvent water into oxygenate products. J. Am. Chem. Soc. 140, 9337–9340 (2018).

    CAS  Google Scholar 

  43. Luo, W. et al. Facet dependence of CO2 reduction paths on Cu electrodes. ACS Catal. 6, 219–229 (2015).

    Google Scholar 

  44. Luc, W. et al. Two-dimensional copper nanosheets for electrochemical reduction of carbon monoxide to acetate. Nat. Catal. 2, 423–430 (2019).

    CAS  Google Scholar 

  45. Gunathunge, C. M. et al. Revealing the predominant surface facets of rough Cu electrodes under electrochemical conditions. ACS Catal. 10, 6908–6923 (2020).

    CAS  Google Scholar 

  46. Zhong, D. et al. Coupling of Cu(100) and (110) facets promotes carbon dioxide conversion to hydrocarbons and alcohols. Angew. Chem. Int. Ed. 60, 4879–4885 (2021).

    CAS  Google Scholar 

  47. Peng, H. et al. Alkaline polymer electrolyte fuel cells stably working at 80 °C. J. Power Sources 390, 165–167 (2018).

    CAS  Google Scholar 

  48. Liu, X. et al. Tandem catalysis for hydrogenation of CO and CO2 to lower olefins with bifunctional catalysts composed of spinel oxide and SAPO-34. ACS Catal. 10, 8303–8314 (2020).

    CAS  Google Scholar 

  49. Ko, H. et al. Electrochemical reduction of gaseous nitrogen oxides on transition metals at ambient conditions. J. Am. Chem. Soc. 144, 1258–1266 (2022).

    CAS  Google Scholar 

  50. Kresse, G. & Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mater. Sci. 6, 15–50 (1996).

    CAS  Google Scholar 

  51. Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).

    CAS  Google Scholar 

  52. Blöchl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953–17979 (1994).

    Google Scholar 

  53. Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758–1775 (1999).

    CAS  Google Scholar 

  54. Hammer, B. et al. Improved adsorption energetics within density-functional theory using revised Perdew-Burke-Ernzerhof functionals. Phys. Rev. B 59, 7413–7421 (1999).

    Google Scholar 

  55. Zhang, Y. & Yang, W. Comment on ‘generalized gradient approximation made simple’. Phys. Rev. Lett. 80, 890–890 (1998).

    CAS  Google Scholar 

  56. Grimme, S. Semiempirical GGA-type density functional constructed with a long-range dispersion correction. J. Comput. Chem. 27, 1787–1799 (2006).

    CAS  Google Scholar 

  57. Henkelman, G. & Jónsson, H. A climbing image nudged elastic band method for finding saddle points and minimum energy paths. J. Chem. Phys. 113, 9901–9904 (2000).

    CAS  Google Scholar 

  58. Henkelman, G. & Jónsson, H. Improved tangent estimate in the nudged elastic band method for finding minimum energy paths and saddle points. J. Chem. Phys. 113, 9978–9985 (2000).

    CAS  Google Scholar 

  59. Olsen, R. A. et al. Comparison of methods for finding saddle points without knowledge of the final states. J. Chem. Phys. 121, 9776–9792 (2004).

    CAS  Google Scholar 

  60. Munro, L. J. & Wales, D. J. Defect migration in crystalline silicon. Phys. Rev. B 59, 3969–3980 (1999).

    CAS  Google Scholar 

  61. Zhao, C. et al. In situ topotactic transformation of an interstitial alloy for CO electroreduction. Adv. Mater. 32, 2002382 (2020).

    CAS  Google Scholar 

  62. Martić, N. et al. Ag2Cu2O3—a catalyst template material for selective electroreduction of CO to C2+ products. Energy Environ. Sci. 13, 2993–3006 (2020).

    Google Scholar 

  63. Li, J. et al. Enhanced multi-carbon alcohol electroproduction from CO via modulated hydrogen adsorption. Nat. Commun. 11, 3685 (2020).

    CAS  Google Scholar 

  64. Ripatti, D. S., Veltman, T. R. & Kanan, M. W. Carbon monoxide gas diffusion electrolysis that produces concentrated C2 products with high single-pass conversion. Joule 3, 240–256 (2019).

    CAS  Google Scholar 

  65. Ozden, A. et al. Cascade CO2 electroreduction enables efficient carbonate-free production of ethylene. Joule 5, 706–719 (2021).

    CAS  Google Scholar 

  66. Zhao, Z. et al. Insight into the formation of Co@Co2C catalysts for direct synthesis of higher alcohols and olefins from syngas. ACS Catal. 8, 228–241 (2018).

    CAS  Google Scholar 

  67. Zhao, Z. et al. Increasing the activity and selectivity of Co-based FTS catalysts supported by carbon materials for direct synthesis of clean fuels by the addition of chromium. J. Catal. 370, 251–264 (2019).

    CAS  Google Scholar 

  68. Sun, X. et al. Manufacture of highly loaded silica-supported cobalt Fischer–Tropsch catalysts from a metal organic framework. Nat. Commun. 8, 1680 (2017).

    Google Scholar 

  69. Cheng, Q. et al. Confined small-sized cobalt catalysts stimulate carbon-chain growth reversely by modifying ASF law of Fischer–Tropsch synthesis. Nat. Commun. 9, 3250 (2018).

    Google Scholar 

  70. Su, J. et al. Syngas to light olefins conversion with high olefin/paraffin ratio using ZnCrOx/AlPO-18 bifunctional catalysts. Nat. Commun. 10, 1297 (2019).

    Google Scholar 

  71. Jiao, F. et al. Selective conversion of syngas to light olefins. Science 351, 1065–1068 (2016).

    CAS  Google Scholar 

  72. Cheng, K. et al. Direct and highly selective conversion of synthesis gas into lower olefins: design of a bifunctional catalyst combining methanol synthesis and carbon–carbon coupling. Angew. Chem. Int. Ed. 55, 4725–4728 (2016).

    CAS  Google Scholar 

  73. Zhai, P. et al. Highly tunable selectivity for syngas-derived alkenes over zinc and sodium-modulated Fe5C2 catalyst. Angew. Chem. Int. Ed. 55, 9902–9907 (2016).

    CAS  Google Scholar 

  74. Ni, Y. et al. Realizing and recognizing syngas-to-olefins reaction via a dual-bed catalyst. ACS Catal. 9, 1026–1032 (2018).

    Google Scholar 

  75. Xu, Y. et al. A hydrophobic FeMn@Si catalyst increases olefins from syngas by suppressing C1 by-products. Science 371, 610–613 (2021).

    CAS  Google Scholar 

Download references

Acknowledgements

This work was supported by the National Key R&D Program of China (2021YFA1501503), the National Natural Science Foundation of China (22125205, 92045302, 22002155), Dalian National Laboratory for Clean Energy (DNL201924, DNL202007), the ‘Transformational Technologies for Clean Energy and Demonstration’ Strategic Priority Research Program of the Chinese Academy of Sciences (XDA21070613), the CAS Youth Innovation Promotion (Y201938), the Natural Science Foundation of Liaoning Province (2021-MS-022), the High-Level Talents Innovation Project of Dalian City (2020RQ038) and the Photon Science Center for Carbon Neutrality. We thank J. Xiao at the Dalian Institute of Chemical Physics, Chinese Academy of Sciences, for fruitful discussion on the DFT calculations.

Author information

Authors and Affiliations

Authors

Contributions

Conceptualization, G.W., X.B. Methodology, P.W., D.G., T.L., H.L., J.S., C.W., R.C. Investigation, P.W., H.L. Visualization, P.W., D.G., T.L. Funding acquisition, D.G., G.W., X.B. Supervision, G.W., X.B. Writing (original draft), D.G., P.W., T.L. Writing (review and editing), D.G., P.W., T.L., G.W., X.B.

Corresponding authors

Correspondence to Guoxiong Wang or Xinhe Bao.

Ethics declarations

Competing interests

The authors declare no competing interests.

Peer review

Peer review information

Nature Nanotechnology thanks Thomas Burdyny and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data

Extended Data Fig. 1 Quantification of liquid products at the cathode.

Molar percentage of (a) n-propanol, (b) ethanol and (c) acetate collected from cathode exhaust using cold trap in these liquid products (cathode/(cathode+anode)*100%), after galvanostatic measurements over Cu nanoparticle catalyst in 0.1 M KOH under CO feed at 0.5, 1 and 1.5 A cm−2 for 4 h. Error bars represent the standard deviation from two independent measurements.

Source data

Extended Data Fig. 2 Determination of possible product oxidation at the anode.

1H-NMR spectra (ac) and concentrations (df) of n-propanol (a, d), ethanol (b, e) and acetate (c, f) of the anolyte after electro-oxidation control experiments conducted under reaction conditions similar to that for CO2/CO electrolysis. The cathode and anode catalysts are Cu nanoparticle and Ir black, respectively. The anode electrolyte is 0.1 M KOH containing ethanol, n-propanol and acetate with concentrations similar to the actual values at 1 A cm−2 (11 mM ethanol, 7.5 mM n-propanol and 54 mM acetate), 2 A cm−2 (23.5 mM ethanol, 9.2 mM n-propanol and 115 mM acetate) and 3 A cm−2 (15 mM ethanol, 6 mM n-propanol and 186 mM acetate). The cathode is fed with Ar at a flow rate of 30 mL min−1. Only peaks assigned n-propanol, ethanol and acetate as well as DSS internal standard are observed from the 1H-NMR spectra, indicating the absence of any liquid products from the electro-oxidation of n-propanol, ethanol and acetate. Error bars represent the standard deviation from two independent measurements. The concentrations before and after electro-oxidation control measurements are the same at all applied current densities, also indicating that n-propanol, ethanol and acetate would not be electrochemically oxidized under reaction conditions.

Source data

Extended Data Fig. 3 CO electrolysis performance.

(a, c) Faradaic efficiency (left Y axis) and cell voltage (right Y axis) and (b, d) Full cell energy efficiency as a function of applied current density over CuO nanosheet catalyst measured in (a, b) 0.1 M KOH under 0.6 MPa pure CO feed with a flow rate of 30 mL min−1 and (c, d) 1 M KOH under 0.6 MPa pure CO feed with a flow rate of 60 mL min−1. Error bars represent the standard deviation from three independent measurements.

Source data

Extended Data Fig. 4 Carbon selectivity and CO/CO2 conversion.

Product selectivity (left Y axis) and CO/CO2 conversion (right Y axis) as a function of applied current density over CuO nanosheet catalyst measured in 0.1 M KOH under (a) pure CO2 feed, (b) CO/CO2 (1:3) co-feed, (c) CO/CO2 (1:1) co-feed, (d) CO/CO2 (3:1) co-feed, (e) pure CO feed, and (f) 0.6 MPa pure CO with a flow rate of 30 mL min−1, as well as 1 M KOH under 0.6 MPa pure CO with a flow rate of 30 (g) and 60 (h) mL min−1. For pure CO2 electrolysis in (a), only C2+ products were accounted for the carbon selectivity. Error bars represent the standard deviation from three independent measurements.

Source data

Extended Data Fig. 5 CO electrolysis stability.

Stability test of CuO nanosheet catalyst at 1 A cm−2 measured in 1 M KOH under pure CO feed with a flow rate of 30 mL min−1.

Source data

Extended Data Fig. 6 The distribution of CO2 in CO/CO2 co-feeds.

CO2 distribution over CuO nanosheet catalyst measured in 0.1 M KOH under CO/CO2 (3:1) co-feed. CO2, CO32–, HCO3 in anode outlet solution were adsorbed and quantified by saturated Ba(OH)2 solution. CO2 in cathode outlet was quantified by on line GC. Most of CO2 is transferred to anode through carbonate crossover.

Source data

Extended Data Fig. 7 Carbon and oxygen sources in acetate.

(a) Molar percentage of 12C–12C, 12C–13C and 13C–13C in the produced acetate over CuO nanosheet catalyst measured in 0.1 M KOH under different 13CO/CO2 co-feeds at 0.6 A cm−2. (b) Molar percentage of CH3C16O16O, CH3C16O18O and CH3C18O18O in the produced acetate over CuO nanosheet catalyst measured in 0.1 M KOH under pure C18O feed at 0.6 A cm−2.

Source data

Extended Data Fig. 8 CO2/CO electrolysis performance on Cu nanoparticles.

(a) TEM image and (b) XRD pattern of Cu nanoparticles. (ce) Faradaic efficiency (left Y axis) and cell voltage (right Y axis) as a function of applied current density over Cu nanoparticle catalyst measured in 0.1 M KOH under (c) pure CO2 feed (30 mL min–1), (d) pure CO feed (60 mL min–1) and (e) 0.6 MPa CO feed (60 mL min–1). Error bars represent the standard deviation from two independent measurements.

Source data

Extended Data Fig. 9 Scale-up demonstration using 100-cm2 electrolyser.

Photographs of (a) 100-cm2 gas diffusion electrode and (b) integrated electrolysis system used in this work. FE and cell voltage as a function of applied current density over CuO nanosheet catalyst measured in (c, d) 0.1 M KOH under (c) pure CO2 feed and (d) CO/CO2 (3:1) co-feed as well as (e) 1 M KOH under pure CO feed. The KOH flow rate is 120 mL min–1, and the gas flow rate is 750 mL min–1.

Source data

Extended Data Fig. 10 Scale-up effectiveness.

Single cell voltage (a, c) and ethylene Faradaic efficiency (b, d) for 4-cm2 and 100-cm2 electrolysers as well as an electrolyser stack with four 100-cm2 MEAs for (a, b) CO2 electrolysis measured in 0.1 M KOH under pure CO2 feed and (c, d) CO electrolysis measured in 1 M KOH under pure CO feed, over CuO nanosheet catalyst.

Source data

Supplementary information

Supplementary Information

Supplementary Notes 1–4, Figs. 1–40 and Tables 1–7.

Source data

Source Data Fig. 1

Statistical source data.

Source Data Fig. 2

Statistical source data.

Source Data Fig. 3

Statistical source data.

Source Data Fig. 4

Statistical source data.

Source Data Fig. 5

Statistical source data.

Source Data Extended Data Fig. 1

Statistical source data.

Source Data Extended Data Fig. 2

Statistical source data.

Source Data Extended Data Fig. 3

Statistical source data.

Source Data Extended Data Fig. 4

Statistical source data.

Source Data Extended Data Fig. 5

Statistical source data.

Source Data Extended Data Fig. 6

Statistical source data.

Source Data Extended Data Fig. 7

Statistical source data.

Source Data Extended Data Fig. 8

Statistical source data.

Source Data Extended Data Fig. 9

Statistical source data.

Source Data Extended Data Fig. 10

Statistical source data.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wei, P., Gao, D., Liu, T. et al. Coverage-driven selectivity switch from ethylene to acetate in high-rate CO2/CO electrolysis. Nat. Nanotechnol. 18, 299–306 (2023). https://doi.org/10.1038/s41565-022-01286-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41565-022-01286-y

This article is cited by

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing