Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

High-performance organic pseudocapacitors via molecular contortion

Nature Materials volume 20, pages 1136–1141 (2021)Cite this article

Subjects

Abstract

Pseudocapacitors harness unique charge-storage mechanisms to enable high-capacity, rapidly cycling devices. Here we describe an organic system composed of perylene diimide and hexaazatrinaphthylene exhibiting a specific capacitance of 689 F g−1 at a rate of 0.5 A g−1, stability over 50,000 cycles, and unprecedented performance at rates as high as 75 A g−1. We incorporate the material into two-electrode devices for a practical demonstration of its potential in next-generation energy-storage systems. We identify the source of this exceptionally high rate charge storage as surface-mediated pseudocapacitance, through a combination of spectroscopic, computational and electrochemical measurements. By underscoring the importance of molecular contortion and complementary electronic attributes in the selection of molecular components, these results provide a general strategy for the creation of organic high-performance energy-storage materials.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on Springer Link
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Synthesis, structure and performance of the electroactive polymer PHATN.
Fig. 2: Three-electrode CV and charging mechanism of PHATN.
Fig. 3: Three-electrode electrochemical characterization of pseudocapacitive behaviour and kinetics of PHATN.
Fig. 4: Characterization of two-electrode button cells assembled from PHATN(−) and AC(+) electrodes.

Similar content being viewed by others

Data availability

The data that support the findings of this study are available from the corresponding authors upon reasonable request.

References

  1. Schmidt, O., Hawkes, A., Gambhir, A. & Staffell, I. The future cost of electrical energy storage based on experience rates. Nat. Energy 2, 17110 (2017).

    Article  Google Scholar 

  2. Lu, Y. & Chen, J. Prospects of organic electrode materials for practical lithium batteries. Nat. Rev. Chem. 4, 127–142 (2020).

    Article  CAS  Google Scholar 

  3. Pomerantseva, E., Bonaccorso, F., Feng, X., Cui, Y. & Gogotsi, Y. Energy storage: the future enabled by nanomaterials. Science 366, eaan8285 (2019).

    Article  CAS  Google Scholar 

  4. Choi, C. et al. Achieving high energy density and high power density with pseudocapacitive materials. Nat. Rev. Mater. 5, 5–19 (2019).

    Article  Google Scholar 

  5. Kim, S. K., Cho, J., Moore, J. S., Park, H. S. & Braun, P. V. High-performance mesostructured organic hybrid pseudocapacitor electrodes. Adv. Funct. Mater. 26, 903–910 (2016).

    Article  CAS  Google Scholar 

  6. Boota, M. & Gogotsi, Y. MXene—conducting polymer asymmetric pseudocapacitors. Adv. Energy Mater. 9, 1802917 (2019).

    Article  CAS  Google Scholar 

  7. Bryan, A. M., Santino, L. M., Lu, Y., Acharya, S. & D’Arcy, J. M. Conducting polymers for pseudocapacitive energy storage. Chem. Mater. 28, 5989–5998 (2016).

    Article  CAS  Google Scholar 

  8. Faulkner, E. B. & Schwartz, R. J. High Performance Pigments 2nd edn (Wiley, 2009).

  9. Lee, S. K. et al. Electrochemistry, spectroscopy and electrogenerated chemiluminescence of perylene, terrylene, and quaterrylene diimides in aprotic solution. J. Am. Chem. Soc. 121, 3513–3520 (1999).

    Article  CAS  Google Scholar 

  10. Geng, J., Renault, S., Poizot, P. & Dolhem, F. Search for greener Li-ion batteries: an alternative offered by organic electroactive materials. in Energy Harvesting and Storage: Materials, Devices, and Applications II (eds Dhar, N. K. et al.) 803504 (SPIE, 2011).

  11. Peng, C. et al. Reversible multi-electron redox chemistry of π-conjugated N-containing heteroaromatic molecule-based organic cathodes. Nat. Energy 2, 17074 (2017).

    Article  CAS  Google Scholar 

  12. Peurifoy, S. R. et al. Three-dimensional graphene nanostructures. J. Am. Chem. Soc. 140, 9341–9345 (2018).

    Article  CAS  Google Scholar 

  13. Schuster, N. J. et al. Electron delocalization in perylene diimide helicenes. Angew. Chem. Int. Ed. 128, 13717–13721 (2016).

    Article  Google Scholar 

  14. Zhong, Y. et al. Helical ribbons for molecular electronics. J. Am. Chem. Soc. 136, 8122–8130 (2014).

    Article  CAS  Google Scholar 

  15. Peurifoy, S. R. et al. Dimensional control in contorted aromatic materials. Chem. Rec. 19, 1050–1061 (2019).

    Article  CAS  Google Scholar 

  16. Forse, A. C., Griffin, J. M., Presser, V., Gogotsi, Y. & Grey, C. P. Ring current effects: factors affecting the NMR chemical shift of molecules adsorbed on porous carbons. J. Phys. Chem. C 118, 7508–7514 (2014).

    Article  CAS  Google Scholar 

  17. Cervini, L. et al. Factors affecting the nucleus-independent chemical shift in NMR studies of microporous carbon electrode materials. Energy Storage Mater. 21, 335–346 (2019).

    Article  Google Scholar 

  18. Matsunaga, T., Kubota, T., Sugimoto, T. & Satoh, M. High-performance lithium secondary batteries using cathode active materials of triquinoxalinylenes exhibiting six electron migration. Chem. Lett. 40, 750–752 (2011).

    Article  CAS  Google Scholar 

  19. Haeupler, B., Wild, A. & Schubert, U. S. Carbonyls: powerful organic materials for secondary batteries. Adv. Energy Mater. 5, 1402034 (2015).

    Article  CAS  Google Scholar 

  20. Hollas, A. et al. A biomimetic high-capacity phenazine-based anolyte for aqueous organic redox flow batteries. Nat. Energy 3, 508–514 (2018).

    Article  CAS  Google Scholar 

  21. Conway, B. E. Transition from “supercapacitor” to “battery” behavior in electrochemical energy storage. J. Electrochem. Soc. 138, 1539 (1991).

    Article  CAS  Google Scholar 

  22. Augustyn, V. et al. High-rate electrochemical energy storage through Li+ intercalation pseudocapacitance. Nat. Mater. 12, 518–522 (2013).

    Article  CAS  Google Scholar 

  23. Forghani, M. & Donne, S. W. Method comparison for deconvoluting capacitive and pseudo-capacitive contributions to electrochemical capacitor electrode behavior. J. Electrochem. Soc. 165, A664–A673 (2018).

    Article  CAS  Google Scholar 

  24. Ardizzone, S., Fregonara, G. & Trasatti, S. “Inner” and “outer” active surface of RuO2 electrodes. Electrochim. Acta 35, 263–267 (1990).

    Article  CAS  Google Scholar 

  25. Baronetto, D., Krstajić, N. & Trasatti, S. Reply to “note on a method to interrelate inner and outer electrode areas” by H. Vogt. Electrochim. Acta 39, 2359–2362 (1994).

    Article  CAS  Google Scholar 

  26. Lee, J.-S. M., Briggs, M. E., Hu, C.-C. & Cooper, A. I. Controlling electric double-layer capacitance and pseudocapacitance in heteroatom-doped carbons derived from hypercrosslinked microporous polymers. Nano Energy 46, 277–289 (2018).

    Article  CAS  Google Scholar 

  27. Li, X.-C. et al. Redox-active triazatruxene-based conjugated microporous polymers for high-performance supercapacitors. Chem. Sci. 8, 2959–2965 (2017).

    Article  CAS  Google Scholar 

  28. Lu, Q., Chen, J. G. & Xiao, J. Q. Nanostructured electrodes for high-performance pseudocapacitors. Angew. Chem. Int. Ed. 52, 1882–1889 (2013).

    Article  CAS  Google Scholar 

  29. Xu, J. et al. Facile synthesis of novel metal-organic nickel hydroxide nanorods for high performance supercapacitor. Electrochim. Acta 211, 595–602 (2016).

    Article  CAS  Google Scholar 

  30. McKeown, N. B. et al. Polymers of intrinsic microporosity (PIMs): bridging the void between microporous and polymeric materials. Chem. Eur. J. 11, 2610–2620 (2005).

    Article  CAS  Google Scholar 

  31. Acharya, S. et al. Ultrahigh stability of high-power nanofibrillar PEDOT supercapacitors. Sustain. Energy Fuels 1, 482–491 (2017).

    Article  CAS  Google Scholar 

  32. Witomska, S. et al. Graphene oxide hybrid with sulfur–nitrogen polymer for high-performance pseudocapacitors. J. Am. Chem. Soc. 141, 482–487 (2018).

    Article  CAS  Google Scholar 

  33. Hou, Z., Yang, Q., Lu, H. & Li, Y. Towards enhanced electrochemical capacitance with self‐assembled synthesis of poly(pyrrole‐co‐o‐toluidine) nanoparticles. J. Appl. Polym. Sci. 133, 42995 (2016).

    Article  CAS  Google Scholar 

  34. Kim, S. K., Kim, Y. K., Lee, H., Lee, S. B. & Park, H. S. Superior pseudocapacitive behavior of confined lignin nanocrystals for renewable energy‐storage materials. ChemSusChem 7, 1094–1101 (2014).

    Article  CAS  Google Scholar 

  35. Park, S. K. et al. 105 cyclable pseudocapacitive Na-ion storage of hierarchically structured phosphorus-incorporating nanoporous carbons in organic electrolytes. ACS Energy Lett. 3, 724–732 (2018).

    Article  CAS  Google Scholar 

  36. Feng, D. et al. Robust and conductive two-dimensional metal−organic frameworks with exceptionally high volumetric and areal capacitance. Nat. Energy 3, 30–36 (2018).

    Article  CAS  Google Scholar 

  37. Rajasingh, P., Cohen, R., Shirman, E., Shimon, L. J. & Rybtchinski, B. Selective bromination of perylene diimides under mild conditions. J. Org. Chem. 72, 5973–5979 (2007).

    Article  CAS  Google Scholar 

  38. Wang, J., Lee, Y., Tee, K., Riduan, S. N. & Zhang, Y. A nanoporous sulfur-bridged hexaazatrinaphthylene framework as an organic cathode for lithium ion batteries with well-balanced electrochemical performance. Chem. Commun. 54, 7681–7684 (2018).

    Article  CAS  Google Scholar 

  39. Yu, W. et al. Discovery of fused tricyclic core containing HCV NS5A inhibitors with pan-genotype activity. Bioorg. Med. Chem. Lett. 26, 3158–3162 (2016).

    Article  CAS  Google Scholar 

  40. Vitaku, E. et al. Phenazine-based covalent organic framework cathode materials with high energy and power densities. J. Am. Chem. Soc. 142, 16–20 (2019).

    Article  CAS  Google Scholar 

  41. Sisto, T. J. et al. Long, atomically precise donor–acceptor cove-edge nanoribbons as electron acceptors. J. Am. Chem. Soc. 139, 5648–5651 (2017).

    Article  CAS  Google Scholar 

  42. Peurifoy, S. R. et al. Designing three-dimensional architectures for high-performance electron accepting pseudocapacitors. J. Am. Chem. Soc. 140, 10960–10964 (2018).

    Article  CAS  Google Scholar 

  43. Shen, Z., Cao, L., Rahn, C. D. & Wang, C.-Y. Least squares galvanostatic intermittent titration technique (LS-GITT) for accurate solid phase diffusivity measurement. J. Electrochem. Soc. 160, A1842 (2013).

    Article  CAS  Google Scholar 

  44. Xu, B. et al. Activated carbon with high capacitance prepared by NaOH activation for supercapacitors. Mater. Chem. Phys. 124, 504–509 (2010).

    Article  CAS  Google Scholar 

  45. Muench, S. et al. Polymer-based organic batteries. Chem. Rev. 116, 9438–9484 (2016).

    Article  CAS  Google Scholar 

  46. Li, H. et al. A high-performance sodium-ion hybrid capacitor constructed by metal–organic framework–derived anode and cathode materials. Adv. Energy Mater. 28, 1800757 (2018).

    Google Scholar 

  47. Zheng, J. P. The limitations of energy density of battery/double-layer capacitor asymmetric cells. J. Electrochem. Soc. 150, A484 (2003).

    Article  CAS  Google Scholar 

  48. Bochevarov, A. D. et al. Jaguar: a high‐performance quantum chemistry software program with strengths in life and materials sciences. Int. J. Quantum Chem. 113, 2110–2142 (2013).

    Article  CAS  Google Scholar 

  49. Lee, S. W. et al. High-power lithium batteries from functionalized carbon-nanotube electrodes. Nat. Nanotechnol. 5, 531–537 (2010).

    Article  CAS  Google Scholar 

  50. Zeng, L. et al. Carbonaceous mudstone and lignin-derived activated carbon and its application for supercapacitor electrode. Surf. Coat. Technol. 357, 580–586 (2019).

    Article  CAS  Google Scholar 

  51. Su, X.-L. et al. Three-dimensional porous activated carbon derived from loofah sponge biomass for supercapacitor applications. Appl. Surf. Sci. 436, 327–336 (2018).

    Article  CAS  Google Scholar 

  52. Wang, Y., Tao, S., An, Y., Wu, S. & Meng, C. Bio-inspired high performance electrochemical supercapacitors based on conducting polymer modified coral-like monolithic carbon. J. Mater. Chem. A 1, 8876–8887 (2013).

    Article  CAS  Google Scholar 

  53. Kim, M., Lee, C. & Jang, J. Fabrication of highly flexible, scalable, and high-performance supercapacitors using polyaniline/reduced graphene oxide film with enhanced electrical conductivity and crystallinity. Adv. Funct. Mater. 24, 2489–2499 (2014).

    Article  CAS  Google Scholar 

  54. Milczarek, G. & Inganäs, O. Renewable cathode materials from biopolymer/conjugated polymer interpenetrating networks. Science 335, 1468–1471 (2012).

    Article  CAS  Google Scholar 

  55. Bachman, J. C. et al. Electrochemical polymerization of pyrene derivatives on functionalized carbon nanotubes for pseudocapacitive electrodes. Nat. Commun. 6, 7040 (2015).

    Article  Google Scholar 

  56. Li, M. & Yang, L. Intrinsic flexible polypyrrole film with excellent electrochemical performance. J. Mater. Sci. Mater. Electron. 26, 4875–4879 (2015).

    Article  CAS  Google Scholar 

  57. Grover, S. et al. Polyaniline all solid-state pseudocapacitor: role of morphological variations in performance evolution. Electrochim. Acta 196, 131–139 (2016).

    Article  CAS  Google Scholar 

  58. Su, D., Zhang, J., Dou, S. & Wang, G. Polypyrrole hollow nanospheres: stable cathode materials for sodium-ion batteries. Chem. Commun. 51, 16092–16095 (2015).

    Article  CAS  Google Scholar 

  59. Cong, H.-P., Ren, X.-C., Wang, P. & Yu, S.-H. Flexible graphene–polyaniline composite paper for high-performance supercapacitor. Energy Environ. Sci. 6, 1185–1191 (2013).

    Article  CAS  Google Scholar 

  60. Cai, Z. et al. Flexible, weavable and efficient microsupercapacitor wires based on polyaniline composite fibers incorporated with aligned carbon nanotubes. J. Mater. Chem. A 1, 258–261 (2013).

    Article  CAS  Google Scholar 

  61. Shen, K. et al. Supercapacitor electrodes based on nano-polyaniline deposited on hollow carbon spheres derived from cross-linked co-polymers. Synth. Met. 209, 369–376 (2015).

    Article  CAS  Google Scholar 

  62. Wang, S. et al. Free-standing 3D graphene/polyaniline composite film electrodes for high-performance supercapacitors. J. Power Sources 299, 347–355 (2015).

    Article  CAS  Google Scholar 

  63. Sun, H. et al. A self-standing nanocomposite foam of polyaniline@reduced graphene oxide for flexible super-capacitors. Synth. Met. 209, 68–73 (2015).

    Article  CAS  Google Scholar 

  64. Wang, Z., Tammela, P., Zhang, P., Strømme, M. & Nyholm, L. High areal and volumetric capacity sustainable all-polymer paper-based supercapacitors. J. Mater. Chem. A 2, 16761–16769 (2014).

    Article  CAS  Google Scholar 

  65. Seok, J. Y., Lee, J. & Yang, M. Self-generated nanoporous silver framework for high-performance iron oxide pseudocapacitor anodes. ACS Appl. Mater. Interfaces 10, 17223–17231 (2018).

    Article  CAS  Google Scholar 

  66. Pan, Z. et al. In situ growth of layered bimetallic ZnCo hydroxide nanosheets for high-performance all-solid-state pseudocapacitor. ACS Nano 12, 2968–2979 (2018).

    Article  CAS  Google Scholar 

  67. Pang, H. et al. Cu superstructures fabricated using tree leaves and Cu–MnO2 superstructures for high performance supercapacitors. J. Mater. Chem. A 1, 5053–5060 (2013).

    Article  CAS  Google Scholar 

  68. Ding, K., Zhang, X., Li, J., Yang, P. & Cheng, X. Phase and morphology evolution of ultrathin Co(OH)2 nanosheets towards supercapacitor application. CrystEngComm 19, 5780–5786 (2017).

    Article  CAS  Google Scholar 

  69. Song, Y. et al. A polyanionic molybdenophosphate anode for a 2.7 V aqueous pseudocapacitor. Nano Energy 65, 104010 (2019).

    Article  CAS  Google Scholar 

  70. Chen, H. et al. One-step fabrication of ultrathin porous nickel hydroxide-manganese dioxide hybrid nanosheets for supercapacitor electrodes with excellent capacitive performance. Adv. Energy Mater. 3, 1636–1646 (2013).

    Article  CAS  Google Scholar 

  71. Qiu, K. et al. Mesoporous, hierarchical core/shell structured ZnCo2O4/MnO2 nanocone forests for high-performance supercapacitors. Nano Energy 11, 687–696 (2015).

    Article  CAS  Google Scholar 

  72. Wu, M.-S. & Wu, J.-F. Nickel hydroxide electrode with porous nanotube arrays prepared by hydrolysis and cathodic deposition for high-performance supercapacitors. J. Power Sources 240, 397–403 (2013).

    Article  CAS  Google Scholar 

  73. Soltanloo, M., Kazazi, M., Yeganeh, S. E. H., Chermahini, M. D. & Mazinani, B. High-performance pseudocapacitive electrode based on electrophoretically deposited NiCo2O4/MWCNTs nanocomposite on 316L stainless steel. JOM 72, 2235–2244 (2020).

    Article  CAS  Google Scholar 

  74. Liu, X. et al. Multi-shelled Ni6MnO8 hollow microspheres for high-performance supercapacitors. Mater. Res. Express 7, 065502 (2020).

    Article  CAS  Google Scholar 

  75. Yang, G.-W., Xu, C.-L. & Li, H.-L. Electrodeposited nickel hydroxide on nickel foam with ultrahigh capacitance. Chem. Commun. https://doi.org/10.1039/B815647F (2008).

  76. Gupta, A. K., Saraf, M., Bharadwaj, P. K. & Mobin, S. M. Dual functionalized CuMOF-based composite for high-performance supercapacitors. Inorg. Chem. 58, 9844–9854 (2019).

    Article  CAS  Google Scholar 

  77. Chen, G.-F., Liu, Z.-Q., Lin, J.-M., Li, N. & Su, Y.-Z. Hierarchical polypyrrole based composites for high performance asymmetric supercapacitors. J. Power Sources 283, 484–493 (2015).

    Article  CAS  Google Scholar 

  78. Jagadale, A. D. et al. Cobalt hydroxide [Co(OH)2] loaded carbon fiber flexible electrode for high performance supercapacitor. RSC Adv. 5, 56942–56948 (2015).

    Article  CAS  Google Scholar 

  79. Wang, H., Casalongue, H. S., Liang, Y. & Dai, H. Ni(OH)2 nanoplates grown on graphene as advanced electrochemical pseudocapacitor materials. J. Am. Chem. Soc. 132, 7472–7477 (2010).

    Article  CAS  Google Scholar 

  80. Li, L., Chen, L., Qian, W., Xie, F. & Dong, C. Directly grown multiwall carbon nanotube and hydrothermal MnO2 composite for high-performance supercapacitor electrodes. Nanomaterials 9, 703 (2019).

    Article  CAS  Google Scholar 

  81. Zhang, F. et al. A high-performance supercapacitor-battery hybrid energy storage device based on graphene-enhanced electrode materials with ultrahigh energy density. Energy Environ. Sci. 6, 1623–1632 (2013).

    Article  CAS  Google Scholar 

  82. Ma, H. et al. Disassembly–reassembly approach to RuO2/graphene composites for ultrahigh volumetric capacitance supercapacitor. Small 13, 1701026 (2017).

    Article  CAS  Google Scholar 

  83. Wang, Y. et al. Ultrathin NiCo-MOF nanosheets for high-performance supercapacitor electrodes. ACS Appl. Energy Mater. 2, 2063–2071 (2019).

    Article  CAS  Google Scholar 

  84. Zhai, T. et al. Phosphate ion functionalized Co3O4 ultrathin nanosheets with greatly improved surface reactivity for high performance pseudocapacitors. Adv. Mater. 29, 1604167 (2017).

    Article  CAS  Google Scholar 

  85. Sun, X. et al. Fabrication of PANI-coated honeycomb-like MnO2 nanospheres with enhanced electrochemical performance for energy storage. Electrochim. Acta 180, 977–982 (2015).

    Article  CAS  Google Scholar 

  86. Sun, M. et al. In situ growth of burl-like nickel cobalt sulfide on carbon fibers as high-performance supercapacitors. J. Mater. Chem. A 3, 1730–1736 (2015).

    Article  CAS  Google Scholar 

  87. Zhou, J. et al. Importance of polypyrrole in constructing 3D hierarchical carbon nanotube@MnO2 perfect core–shell nanostructures for high-performance flexible supercapacitors. Nanoscale 7, 14697–14706 (2015).

    Article  CAS  Google Scholar 

  88. Zhang, X., Ji, L., Zhang, S. & Yang, W. Synthesis of a novel polyaniline-intercalated layered manganese oxide nanocomposite as electrode material for electrochemical capacitor. J. Power Sources 173, 1017–1023 (2007).

    Article  CAS  Google Scholar 

  89. Li, L. et al. Facile Synthesis of MnO2/CNTs composite for supercapacitor electrodes with long cycle stability. J. Phys. Chem. C 118, 22865–22872 (2014).

    Article  CAS  Google Scholar 

  90. Liu, Z., Xu, K., Sun, H. & Yin, S. One-step synthesis of single-layer MnO2 nanosheets with multi-role sodium dodecyl sulfate for high-performance pseudocapacitors. Small 11, 2182–2191 (2015).

    Article  CAS  Google Scholar 

  91. Liang, Y. et al. Direct access to metal or metal oxide nanocrystals integrated with one-dimensional nanoporous carbons for electrochemical energy storage. J. Am. Chem. Soc. 132, 15030–15037 (2010).

    Article  CAS  Google Scholar 

  92. Rajagopal, R., Lee, Y. S. & Ryu, K.-S. Synthesis and electrochemical analysis of Nb2O5-TiO2/H-rGO sandwich type layered architecture electrode for supercapacitor application. Chem. Eng. J. 325, 611–623 (2017).

    Article  CAS  Google Scholar 

  93. Mathis, T. S. et al. Energy storage data reporting in perspective—guidelines for interpreting the performance of electrochemical energy storage systems. Adv. Energy Mater. 9, 1902007 (2019).

    Article  CAS  Google Scholar 

  94. Yeager, H. & Steck, A. Cation and water diffusion in Nafion ion exchange membranes: influence of polymer structure. J. Electrochem. Soc. 128, 1880 (1981).

    Article  CAS  Google Scholar 

  95. Splith, T., Fröhlich, D., Henninger, S. K. & Stallmach, F. Development and application of an exchange model for anisotropic water diffusion in the microporous MOF aluminum fumarate. J. Magn. Reson. 291, 40–46 (2018).

    Article  CAS  Google Scholar 

Download references

Acknowledgements

This work was supported by the US National Science Foundation Division of Materials Research under Award number DMR-2002634 and the Office of Naval Research (ONR) under Award no. N00014-16-1-2921. The electrochemical measurement apparatus was purchased with the help of the US Air Force Office of Scientific Research (AFOSR) Grant No. FA9550-18-1-0020. C.N. thanks S. Buckler and D. Buckler for their generous support. J.C.R. and S.R.P. are supported by the US Department of Defense through the National Defense Science & Engineering Graduate Fellowship (NDSEG) Program. V.A.P. is supported by the National Science Foundation Graduate Research Fellowship Program (NSF GRFP #2019279091). D.A.R. thanks the Columbia Nano Initiative for postdoctoral fellowship support. L.E.M. thanks Columbia University for lab startup funding. Y.Y. acknowledges support from the Air Force Office of Scientific Research (FA9550-20-1-0233).

Author information

Authors and Affiliations

  1. Department of Chemistry, Columbia University, New York, NY, USA

    Jake C. Russell, Victoria A. Posey, Jesse Gray, Douglas A. Reed, Michael L. Steigerwald, Xavier Roy, Colin Nuckolls & Samuel R. Peurifoy

  2. Department of Chemical Engineering, Columbia University, New York, NY, USA

    Richard May & Lauren E. Marbella

  3. Department of Chemistry, Beijing Key Laboratory of Advanced Chemical Energy Storage Technologies and Materials, Beijing, China

    Hao Zhang

  4. Department of Applied Physics and Applied Mathematics, Columbia University, New York, NY, USA

    Yuan Yang

Authors
  1. Jake C. Russell
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Victoria A. Posey
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jesse Gray
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Richard May
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Douglas A. Reed
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Hao Zhang
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Lauren E. Marbella
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Michael L. Steigerwald
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Yuan Yang
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. Xavier Roy
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. Colin Nuckolls
    View author publications

    You can also search for this author in PubMed Google Scholar

  12. Samuel R. Peurifoy
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

J.C.R., Y.Y., X.R., C.N. and S.R.P. designed the experiments. S.R.P. and J.G. synthesized and spectroscopically characterized the materials. J.C.R. and V.A.P. fabricated the devices and performed the electrochemical measurements. R.M. and L.E.M. performed solid-state NMR measurements. D.A.R. and S.R.P. performed the gas adsorption analysis. H.Z. provided the activated carbon electrodes. S.R.P. and M.L.S. performed the DFT modelling. All authors discussed the data and contributed to writing the manuscript.

Corresponding authors

Correspondence to Xavier Roy, Colin Nuckolls or Samuel R. Peurifoy.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature Materials thanks Olivier Fontaine and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Extended data

Extended Data Fig. 1 Solid state 13C NMR of PHATN.

a, Cyclized PHATN (2) and the thermolyzed product (PHATN). Note the retention of the characteristic aromatic material peaks between 𝛿 200-100 ppm and the disappearance of the alkyl peaks between 𝛿 75-0 ppm, indicating the near-quantitative removal of the alkyl chains during thermolysis. b, Solid-state 13C NMR of the PHATN material incorporated into an electrode (see Methods for details), both as-fabricated (orange trace) and soaked in electrolyte (purple trace), showing a shift assigned to ion association to a carbonyl within the material. Asterisks denote spinning sidebands at magic angle spinning frequency of 18 kHz.

Extended Data Fig. 2 DFT model of extended PHATN.

(a) Top-view and (b) side-view of the DFT energy-minimized structure of Extended PHATN composed of multiple units of PDI and HATN. The accessible space provided by molecular contortion is clearly visible.

Extended Data Fig. 3 Specific capacitance as a function of current density for PHATN and a suite of benchmark materials.

Green symbols are carbon-based materials;35,49,50,51 red symbols are conducting polymer-based materials;5,27,31,32,33,34,52,53,54,55,56,57,58,59,60,61,62,63,64 purple symbols are hybrid organic/inorganic materials;65,66,67,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82 and blue symbols are inorganic materials83,84,85,86,87,88,89,90,91,92. PHATN outperforms nearly all other pure organic materials at lower rates, and at higher rates achieves performance unprecedented in any material class besides inorganic compounds. PHATN values and all reference values are taken from three-electrode measurements.

Extended Data Fig. 4 Gas adsorption measurements of PHATN and PA-PDI.

Adsorption (filled symbols) and desorption (open symbols) isotherms of CO2 for PHATN (dark green) and PA-PDI (blue) collected at −78 °C. Analysis of the PHATN isotherm (dark green) shows a Brunauer-Emmett-Teller surface area of 131 m2/g, calculated using the pressure range 50–227 torr, and a Langmuir surface area of 671 m2/g, calculated using the pressure range of 227–647 torr. However, as PHATN can likely undergo further structural distortions under operating conditions, these values are intended to be an estimate of the surface area and are included here for reporting purposes only. Analysis of the PA-PDI isotherm (blue) shows a Brunauer-Emmett-Teller surface area of 12 m2/g, calculated using the pressure range 50–227 torr. This is indicative of extremely low porosity, consistent with our hypothesis that contortion is crucial to the characteristic porosity shown in PHATN.

Extended Data Fig. 5 EIS measurements of PHATN performed at a range of hold potentials.

a, High frequency region of the Nyquist plots displaying potential dependence of the diameter of the semicircular segment. The change in diameter of the semicircle with potential is indicative of a change in charge transfer resistance, as expected from a pseudocapacitive process93. The dotted lines are guides for the eye. b, Low frequency region of the Nyquist plots, which shows steeper Warburg regions at more negative potentials. c, Frequency dependence of the specific capacitance, which shows a low-frequency plateau forming near 800 F/g – near the maximum measured capacitance (689 F/g) and approaching the theoretical capacitance of the material (996 F/g). The potentials are in V vs Hg/HgO.

Extended Data Fig. 6 Self-discharge of PHATN in a three-electrode configuration.

(a), (b), and (c) show the effect of holding the electrode at the max charge voltage before allowing to relax, with (a) in linear time, (b) in log time, and (c) in root time. (d), (e), and (f) show the effect of the max charge voltage on the self-discharge behavior, with (d) in linear time, (e) in log time, and (f) in root time.

Extended Data Fig. 7 Electrochemical characterization of PA-PDI, an uncontorted control material.

a, CV of PA-PDI shows similar reversible redox peaks to PHATN, though sharper and less broad. b, GCD of PA-PDI shows relatively high IR drop and less ideal triangular capacitor shape. All measurements were performed in 6 M KOH aqueous electrolyte.

Extended Data Fig. 8 Direct electrochemical comparison of PA-PDI with PHATN.

a, CV at 50 mV/s and b, GCD at 1 A/g. c, Nyquist plot of PA-PDI, when compared to PHATN, displays a less steep Warburg slope in the low-frequency region, indicating less capacitive character. Both measurements are performed at −0.7 V vs Hg/HgO. Frequency range is from 100 kHz to 20 mHz.

Extended Data Fig. 9 Rate and cycling performance of PA-PDI.

a, Specific capacitance values vs. rate for PHATN and PA-PDI. The latter has consistently lower performance, especially at high rates, attributable to the absence of contortion and resulting internal space which enable ion movement. b, Capacity retention and coulombic efficiency vs. number of cycles for PA-PDI. The material maintains the same high stability over 10,000 cycles as PHATN, indicating that the polymeric material is well-formed and not affected by repeated charging and discharging.

Extended Data Fig. 10 Galvanostatic intermittent titration technique (GITT) for PHATN and PA-PDI.

GITT discharge curves as function of time for (a) PHATN and (b) PA-PDI. The measurements were performed at 2 A/g with 20 s current pulse and 1 min open circuit relaxation. c, Schematic interpretation of the GITT data to estimate the diffusion constant (see below equation). d, Diffusion coefficient (D) of the charge carrying species measured from GITT for PHATN and PA-PDI. Comparing the diffusion coefficients across the potential range, we observe that the diffusion coefficient of PHATN (~1 × 10−7 cm2/s) is nearly one order of magnitude larger than that of PA-PDI (~3 × 10−8 cm2/s), indicating that the charge carrying species (K+) diffuses through the internal space created by contortion much more quickly, leading to the superior performance of PHATN. These values of ionic diffusion coefficients are comparable to reported values measured with aqueous electrolyte in porous polymeric materials94,95.

Supplementary information

Supplementary Information

Supplementary Figs. 1–30, Tables 1–8, Schemes 1–6, XYZ coordinates of DFT energy-minimized structures and discussion.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Russell, J.C., Posey, V.A., Gray, J. et al. High-performance organic pseudocapacitors via molecular contortion. Nat. Mater. 20, 1136–1141 (2021). https://doi.org/10.1038/s41563-021-00954-z

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41563-021-00954-z

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing