Snap-through buckling is commonly used in nature for power-amplified movements. While natural examples such as Utricularia and Dionaea muscipula can autonomously reset their snapping structures, bio-inspired analogues require external mediation for sequential snap events. Here we report the design principles for self-repeating, snap-based polymer jumping devices. Transient shape changes during the drying of a polymer gel are exploited to generate mechanical constraint and an internal driving force for snap-through buckling. Snap-induced shape changes alter environmental interactions to realize multiple, self-repeating snap events. The underlying mechanisms are understood through controlled experiments and numerical modelling. Using these lessons, we create snap-induced jumping devices with power density outputs (specific power ≈ 312 W kg−1) that are similar to high-performing jumping organisms and engineered robots. These results provide the demonstration of an autonomous, self-repeating, high-speed movement, marking an important advance in the development of environmental energy harvesting, high-power motion that is important for microscale robots and actuated devices.
This is a preview of subscription content
Subscribe to Nature+
Get immediate online access to the entire Nature family of 50+ journals
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
The authors declare that data supporting the findings of this study are available within the paper and its supplementary information files. Additional data used in constructing plots and figures are available from UMass ScholarWorks (https://scholarworks.umass.edu/data/116).
Longo, S. J. et al. Beyond power amplification: latch-mediated spring actuation is an emerging framework for the study of diverse elastic systems. J. Exp. Biol. 222, jeb197889 (2019).
Ilton, M. et al. The principles of cascading power limits in small, fast biological and engineered systems. Science 360, eaao1082 (2018).
Gomez, M., Moulton, D. E. & Vella, D. Critical slowing down in purely elastic ‘snap-through’ instabilities. Nat. Phys. 13, 142–145 (2017).
Vangbo, M. An analytical analysis of a compressed bistable buckled beam. Sens. Actuators A Phys. 69, 212–216 (1998).
Sano, T. G. & Wada, H. Snap-buckling in asymmetrically constrained elastic strips. Phys. Rev. E 97, 013002 (2018).
Chen, D., Yoon, J., Chandra, D., Crosby, A. J. & Hayward, R. C. Stimuli-responsive buckling mechanics of polymer films. J. Polym. Sci. B Polym. Phys. 52, 1441–1461 (2014).
Siéfert, E., Reyssat, E., Bico, J. & Roman, B. Bio-inspired pneumatic shape-morphing elastomers. Nat. Mater. 18, 24–28 (2019).
Keplinger, C., Li, T., Baumgartner, R., Suo, Z. & Bauer, S. Harnessing snap-through instability in soft dielectrics to achieve giant voltage-triggered deformation. Soft Matter 8, 285–288 (2012).
Camescasse, B., Fernandes, A. & Pouget, J. Bistable buckled beam: elastica modeling and analysis of static actuation. Int. J. Solids Struct. 50, 2881–2893 (2013).
Pi, Y.-L. & Bradford, M. A. Nonlinear dynamic buckling of pinned-fixed shallow arches under a sudden central concentrated load. Nonlinear Dyn. 73, 1289–1306 (2013).
Gerbode, S. J., Puzey, J. R., McCormick, A. G. & Mahadevan, L. How the cucumber tendril coils and overwinds. Science 337, 1087–1091 (2012).
Erb, R. M., Sander, J. S., Grisch, R. & Studart, A. R. Self-shaping composites with programmable bioinspired microstructures. Nat. Commun. 4, 1712 (2013).
Reyssat, E. & Mahadevan, L. Hygromorphs: from pine cones to biomimetic bilayers. J. R. Soc. Interface 6, 951–957 (2009).
Poppinga, S. et al. Biomechanical analysis of prey capture in the carnivorous Southern bladderwort (Utricularia australis). Sci. Rep. 7, 1776 (2017).
Skotheim, J. M. & Mahadevan, L. Physical limits and design principles for plant and fungal movements. Science 308, 1308–1310 (2005).
Poppinga, S., Weisskopf, C., Westermeier, A. S., Masselter, T. & Speck, T. Fastest predators in the plant kingdom: functional morphology and biomechanics of suction traps found in the largest genus of carnivorous plants. AoB Plants 8, plv140 (2016).
Holmes, D. P. & Crosby, A. J. Snapping surfaces. Adv. Mater. 19, 3589–3593 (2007).
Lee, H., Xia, C. & Fang, N. X. First jump of microgel; actuation speed enhancement by elastic instability. Soft Matter 6, 4342–4345 (2010).
Zhao, Q. et al. A bioinspired reversible snapping hydrogel assembly. Mater. Horiz. 3, 422–428 (2016).
Haldane, D. W., Plecnik, M. M., Yim, J. K. & Fearing, R. S. Robotic vertical jumping agility via series-elastic power modulation. Sci. Robot. 1, eaag2048 (2016).
Hu, Y., Chen, X., Whitesides, G. M., Vlassak, J. J. & Suo, Z. Indentation of polydimethylsiloxane submerged in organic solvents. J. Mater. Res. 26, 785–795 (2011).
Smallwood, I. M. Handbook of Organic Solvent Properties (Butterworth-Heinemann, 2012).
Pandey, A., Moulton, D. E., Vella, D. & Holmes, D. P. Dynamics of snapping beams and jumping poppers. Europhys. Lett. 105, 24001 (2014).
Hong, W., Zhao, X., Zhou, J. & Suo, Z. A theory of coupled diffusion and large deformation in polymeric gels. J. Mech. Phys. Solids 56, 1779–1793 (2008).
Hong, W., Liu, Z. & Suo, Z. Inhomogeneous swelling of a gel in equilibrium with a solvent and mechanical load. Int. J. Solids Struct. 46, 3282–3289 (2009).
Thomson, W. 4. On the equilibrium of vapour at a curved surface of liquid. Proc. R. Soc. Edinb. 7, 63–68 (1872).
Sutton, G. P., Doroshenko, M., Cullen, D. A. & Burrows, M. Take-off speed in jumping mantises depends on body size and a power-limited mechanism. J. Exp. Biol. 219, 2127–2136 (2016).
Olberding, J. P. & Deban, S. M. Effects of temperature and force requirements on muscle work and power output. J. Exp. Biol. 220, 2017–2025 (2017).
This material is based upon work supported by, or in part by, the US Army Research Laboratory and the US Army Research Office under contract/grant number W911NF-15-1-0358.
The authors declare no competing interests.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Video Legends 1–8, Sections 1–3, Note 1, Figs. 1–6 and refs. 1–7.
Multiple, sequential snap-through transitions of a swollen polymer gel strip with one fixed end.
Multiple, sequential snap-through transitions of a swollen polymer gel strip on a PTFE substrate.
Multiple, sequential snap transitions of an externally constrained PDMS strip (h0 = 0.5 mm, w0 = 5 mm, L = 50 mm, ΔL = 10 mm)
High-speed video of a snapping shell (R0 = 4 mm, h0 = 0.6 mm, tprep = 40 s).
High-speed video of a snapping shell (R0 = 3 mm, h0 = 0.3 mm, tprep = 30 s) jumping on the copper mesh.
A snapping shell climbing down a slope.
Snapping shells climbing a ladder with a height of 8 cm.
Movie of finite element simulation of buckling induced during evaporative de-swelling of an initially swollen elastomer beam.
About this article
Cite this article
Kim, Y., van den Berg, J. & Crosby, A.J. Autonomous snapping and jumping polymer gels. Nat. Mater. 20, 1695–1701 (2021). https://doi.org/10.1038/s41563-020-00909-w
Nature Materials (2021)
Nature Materials (2021)