Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Programming shape using kirigami tessellations


Kirigami tessellations, regular planar patterns formed by partially cutting flat, thin sheets, allow compact shapes to morph into open structures with rich geometries and unusual material properties. However, geometric and topological constraints make the design of such structures challenging. Here we pose and solve the inverse problem of determining the number, size and orientation of cuts that enables the deployment of a closed, compact regular kirigami tessellation to conform approximately to any prescribed target shape in two or three dimensions. We first identify the constraints on the lengths and angles of generalized kirigami tessellations that guarantee that their reconfigured face geometries can be contracted from a non-trivial deployed shape to a compact, non-overlapping planar cut pattern. We then encode these conditions into a flexible constrained optimization framework to obtain generalized kirigami patterns derived from various periodic tesselations of the plane that can be deployed into a wide variety of prescribed shapes. A simple mechanical analysis of the resulting structure allows us to determine and control the stability of the deployed state and control the deployment path. Finally, we fabricate physical models that deploy in two and three dimensions to validate this inverse design approach. Altogether, our approach, combining geometry, topology and optimization, highlights the potential for generalized kirigami tessellations as building blocks for shape-morphing mechanical metamaterials.

This is a preview of subscription content, access via your institution

Access options

Buy this article

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Inverse design framework.
Fig. 2: Generalized planar kirigami patterns.
Fig. 3: Planar deployment of generalized kirigami tessellation.
Fig. 4: Generalized kirigami patterns for three-dimensional surface fitting.
Fig. 5: Three-dimensional deployment of generalized kirigami tessellation.

Similar content being viewed by others

Data availability

The data that support the findings of this study are available from the corresponding author on reasonable request.

Code availability

Computer codes used in this study are available from the corresponding author on request.


  1. Grima, J. N. & Evans, K. E. Auxetic behavior from rotating squares. J. Mater. Sci. Lett. 19, 1563–1565 (2000).

    Article  CAS  Google Scholar 

  2. Grima, J. N., Alderson, A. & Evans, K. E. Negative Poisson’s ratios from rotating rectangles. Comp. Methods Sci. Technol. 10, 137–145 (2004).

    Article  Google Scholar 

  3. Grima, J. N., Alderson, A. & Evans, K. E. Auxetic behaviour from rotating rigid units. Phys. Status Solidi B 242, 561–575 (2005).

    Article  CAS  Google Scholar 

  4. Rafsanjani, A. & Pasini, D. Bistable auxetic mechanical metamaterials inspired by ancient geometric motifs. Extreme Mech. Lett. 9, 291–296 (2016).

    Article  Google Scholar 

  5. Sussman, D. M. et al. Algorithmic lattice kirigami: a route to pluripotent materials. Proc. Natl Acad. Sci. USA 112, 7449–7453 (2013).

    Article  Google Scholar 

  6. Blees, M. K. et al. Graphene kirigami. Nature 524, 204–207 (2015).

    Article  CAS  Google Scholar 

  7. Zhang, Y. et al. A mechanically driven form of Kirigami as a route to 3D mesostructures in micro/nanomembranes. Proc. Natl Acad. Sci. USA 112, 11757–11764 (2015).

    Article  CAS  Google Scholar 

  8. Shyu, T. C. et al. A kirigami approach to engineering elasticity in nanocomposites through patterned defects. Nat. Mater. 14, 785 (2015).

    Article  CAS  Google Scholar 

  9. Rafsanjani, A. & Bertoldi, K. Buckling-induced kirigami. Phys. Rev. Lett. 118, 084301 (2017).

    Article  Google Scholar 

  10. Konaković, M. et al. Beyond developable: computational design and fabrication with auxetic materials. ACM Trans. Graph. 35, 89 (2016).

    Article  Google Scholar 

  11. Tang, Y. & Yin, J. Design of cut unit geometry in hierarchical kirigami-based auxetic metamaterials for high stretchability and compressibility. Extreme Mech. Lett. 12, 77–85 (2017).

    Article  Google Scholar 

  12. Gatt, R. et al. Hierarchical auxetic mechanical metamaterials. Sci. Rep. 5, 8395 (2015).

    Article  CAS  Google Scholar 

  13. Kolken, H. M. & Zadpoor, A. A. Auxetic mechanical metamaterials. RSC Adv. 7, 5111–5129 (2017).

    Article  CAS  Google Scholar 

  14. Mitschke, H., Robins, V., Mecke, K. & Schröder-Turk, G. E. Finite auxetic deformations of plane tessellations. Proc. R. Soc. Lond. A 469, 20120465 (2013).

    Article  Google Scholar 

  15. Shan, S., Kang, S. H., Zhao, Z., Fang, L. & Bertoldi, K. Design of planar isotropic negative Poissons ratio structures. Extreme Mech. Lett. 4, 96–102 (2015).

    Article  Google Scholar 

  16. Isobe, M. & Okumura, K. Initial rigid response and softening transition of highly stretchable kirigami sheet materials. Sci. Rep. 6, 24758 (2016).

    Article  CAS  Google Scholar 

  17. Neville, R. M., Scarpa, F. & Pirrera, A. Shape morphing kirigami mechanical metamaterials. Sci. Rep. 6, 31067 (2016).

    Article  CAS  Google Scholar 

  18. Celli, P. et al. Shape-morphing architected sheets with non-periodic cut patterns. Soft Matter 14, 9744–9749 (2018).

    Article  CAS  Google Scholar 

  19. Grünbaum, B. & Shephard, G. C. Tilings and Patterns (Freeman, 1987).

  20. Choi, G. P.-T. & Lui, L. M. A linear formulation for disk conformal parameterization of simply-connected open surfaces. Adv. Comput. Math. 44, 87–114 (2018).

    Article  Google Scholar 

  21. Meng, T. W., Choi, G. P.-T. & Lui, L. M. TEMPO: feature-endowed Teichmüller extremal mappings of point clouds. SIAM J. Imaging Sci. 9, 1922–1962 (2016).

    Article  Google Scholar 

  22. Dudte, L. H., Vouga, E., Tachi, T. & Mahadevan, L. Programming curvature using origami tessellations. Nat. Mater. 15, 583–588 (2016).

    Article  CAS  Google Scholar 

Download references


This work was supported in part by the Croucher Foundation (G.P.T.C.), National Science Foundation grant no. DMR 14-20570 (L.M.), DMREF grant no. 15-33985 (L.M.) and EFRI grant no. 18-30901 (L.M.). We thank M. Goldberg for contributing to preliminary numerical work, M. Gazzola for helpful initial discussions, and A. Nagarkar and the Whitesides Group for help with fabrication of some of the models using PDMS.

Author information

Authors and Affiliations



L.H.D. and L.M. conceived the research. G.P.T.C., L.H.D. and L.M designed the research. G.P.T.C. and L.H.D. conducted the simulations and built the models. G.P.T.C., L.H.D. and L.M. analysed the results and wrote the manuscript.

Corresponding author

Correspondence to L. Mahadevan.

Ethics declarations

Competing interests

We have filed a patent on our algorithms for kirigami design.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Sections 1–7, Supplementary Figs. 1–13 and supplementary references.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Choi, G.P.T., Dudte, L.H. & Mahadevan, L. Programming shape using kirigami tessellations. Nat. Mater. 18, 999–1004 (2019).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:

This article is cited by


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing