Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Double-lattice photonic-crystal resonators enabling high-brightness semiconductor lasers with symmetric narrow-divergence beams

Abstract

Achieving high brightness (where brightness is defined as optical power per unit area per unit solid angle) in semiconductor lasers is important for various applications, including direct-laser processing and light detection and ranging for next-generation smart production and mobility. Although the brightness of semiconductor lasers has been increased by the use of edge-emitting-type resonators, their brightness is still one order of magnitude smaller than that of gas and solid-state/fibre lasers, and they often suffer from large beam divergence with strong asymmetry and astigmatism. Here, we develop a so-called ‘double-lattice photonic crystal’, where we superimpose two photonic lattice groups separated by one-quarter wavelength in the x and y directions. Using this resonator, an output power of 10 W with a very narrow-divergence-angle (<0.3°) symmetric surface-emitted beam is achieved from a circular emission area of 500 μm diameter under pulsed conditions, which corresponds to a brightness of over 300 MW cm−2 sr−1. In addition, an output power up to ~7 W is obtained under continuous-wave conditions. Detailed analyses on the double-lattice structure indicate that the resonators have the potential to realize a brightness of up to 10 GW cm−2 sr−1, suggesting that compact, affordable semiconductor lasers will be able to rival existing gas and fibre/disk lasers.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Double-lattice photonic-crystal resonators.
Fig. 2: Examples of double-lattice photonic-crystal resonators and calculated mode stability.
Fig. 3: Process flow for fabricating double-lattice photonic crystals and lasing characteristics of the laser device under room-temperature, pulsed conditions.
Fig. 4: Lasing characteristics of the double-lattice photonic-crystal laser under c.w. conditions.
Fig. 5: Optimized double-lattice photonic-crystal resonators using destructive interaction between 180°- and 90°-diffracted light waves.

Similar content being viewed by others

Data availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.

References

  1. Ross, T. S. & Latham, W. P. Appropriate measures and consistent standard for high energy laser beam quality. J. Directed Energy 2, 22–58 (2006).

    Google Scholar 

  2. Shukla, P., Lawrence, J. & Zhang, Y. Understanding laser beam brightness: a review and new prospective in material processing. Opt. Laser Technol. 75, 40–51 (2015).

    Article  CAS  Google Scholar 

  3. Paschke, K. et al. High power and high spectral brightness in 1060 nm α-DFB lasers with long resonators. Electron. Lett. 39, 369–370 (2003).

    Article  Google Scholar 

  4. Lim, J. J. et al. Design and simulation of next-generation high-power, high-brightness laser diodes. IEEE J. Sel. Topics Quantum Electron. 15, 993–1008 (2009).

    Article  CAS  Google Scholar 

  5. Crump, P. et al. Efficient high-power laser diodes. IEEE J. Sel. Top. Quantum Electron. 19, 1501211 (2013).

    Article  Google Scholar 

  6. Treusch, H.-G. et al. High-brightness semiconductor laser sources for materials processing: stacking, beam shaping, and bars. IEEE J. Sel. Top. Quantum Electron. 6, 601–614 (2000).

    Article  CAS  Google Scholar 

  7. Li, H. et al. Reliable high-efficiency high-brightness laser diode bars at 940 nm. Opt. Laser Technol. 36, 327–329 (2004).

    Article  CAS  Google Scholar 

  8. Karow, M. M. et al. Efficient 600-W-laser bars for long-pulse pump applications at 940 and 975 nm. IEEE Photon. Technol. Lett. 29, 1683–1686 (2017).

    Article  CAS  Google Scholar 

  9. Miah, M. J. et al. 1.9 W continuous-wave single transverse mode emission from 1060 nm edge-emitting lasers with vertically extended lasing area. Appl. Phys. Lett. 105, 151105 (2014).

    Article  Google Scholar 

  10. Gründl, T. et al. Record single-mode, high-power VCSELs by inhibition of spatial hole burning. IEEE J. Sel. Top. Quantum Electron. 19, 1700913 (2013).

    Article  Google Scholar 

  11. Seurin, J.-F. et al. High-brightness pump sources using 2D VCSEL arrays. Proc. SPIE 7615, 76150F (2010).

    Article  Google Scholar 

  12. Siegman, A. E. New developments in laser resonators. Proc. SPIE 1224, 2–14 (1990).

    Article  CAS  Google Scholar 

  13. Chang-Hasnain, C. J. et al. Transverse mode characteristics of vertical cavity surface-emitting lasers. Appl. Phys. Lett. 57, 218–220 (1990).

    Article  CAS  Google Scholar 

  14. Siegman, A. E. Defining, measuring, and optimizing laser beam quality. Proc. SPIE 1868, 2–12 (1993).

    Article  Google Scholar 

  15. Wenzel, H.et al. Theoretical and experimental analysis of the lateral modes of high-power broad-area lasers. Proceedings of Numerical Simulation of Optoelectronic Devices (NUSOD) 143–144 (2011).

  16. Crump, P. et al. Experimental and theoretical analysis of the dominant lateral waveguiding mechanism in 975 nm high power broad area diode lasers. Semicond. Sci. Technol. 27, 045001 (2012).

    Article  Google Scholar 

  17. Winterfeldt, M., Crump, P., Wenzel, H., Erbert, G. & Tränkle, G. Experimental investigation of factors limiting slow axis beam quality in 9xx nm high power broad area diode lasers. J. Appl. Phys. 116, 063103 (2014).

    Article  Google Scholar 

  18. Sverdlov, B. et al. Optimization of fiber coupling in ultra-high power pump modules at λ = 980nm. Proc. SPIE 8605, 860508 (2013).

    Article  Google Scholar 

  19. Sumpf, B. et al. High-brightness quantum well tapered lasers. IEEE J. Sel. Topics Quantum Electron. 13, 1009–1020 (2009).

    Article  Google Scholar 

  20. Imada, M., Noda, S., Chutinan, A. & Tokuda, T. Coherent two-dimensional lasing action in surface-emitting laser with triangular-lattice photonic crystal structure. Appl. Phys. Lett. 75, 316–318 (1999).

    Article  CAS  Google Scholar 

  21. Riechel, S., Kallinger, C., Lemmer, U. & Feldmann, J. A nearly diffraction limited surface emitting conjugated polymer laser utilizing a two-dimensional photonic band structure. Appl. Phys. Lett. 77, 2310–2312 (2000).

    Article  CAS  Google Scholar 

  22. Noda, S., Yokoyama, M., Imada, M., Chutinan, A. & Mochizuki, M. Polarization mode control of two-dimensional photonic crystal laser by unit cell structure design. Science 293, 1123–1125 (2001).

    Article  CAS  Google Scholar 

  23. Ryu, H.-Y., Kwon, S.-H., Lee, Y.-J., Lee, Y.-H. & Kim, J.-S. Very-low-threshold photonic band-edge lasers from free-standing triangular photonic crystal slabs. Appl. Phys. Lett. 80, 3476–3478 (2002).

    Article  CAS  Google Scholar 

  24. Miyai, E. et al. Lasers producing tailored beams. Nature 441, 946 (2006).

    Article  CAS  Google Scholar 

  25. Kim, M. et al. Surface-emitting photonic-crystal distributed-feedback laser for the midinfrared. Appl. Phys. Lett. 88, 191105 (2006).

    Article  Google Scholar 

  26. Matsubara, H. et al. GaN photonic-crystal surface-emitting laser at blue-violet wavelengths. Science 319, 445–447 (2008).

    Article  CAS  Google Scholar 

  27. Kurosaka, Y. et al. On-chip beam-steering photonic-crystal lasers. Nat. Photon. 4, 447–450 (2010).

    Article  CAS  Google Scholar 

  28. Hirose, K. et al. Watt-class high-power, high-beam-quality photonic crystal lasers. Nat. Photon. 8, 406–411 (2014).

    Article  CAS  Google Scholar 

  29. Liang, Y., Peng, C., Sakai, K., Iwahashi, S. & Noda, S. Three-dimensional coupled-wave model for square-lattice photonic crystal lasers with transverse electric polarization: a general approach. Phys. Rev. B 84, 195119 (2011).

    Article  Google Scholar 

  30. Liang, Y., Peng, C., Sakai, K., Iwahashi, S. & Noda, S. Three-dimensional coupled-wave analysis for square-lattice photonic-crystal lasers with transverse electric polarization: finite-size effects. Opt. Express 20, 15945–15961 (2012).

    Article  CAS  Google Scholar 

  31. Yoshida, M. et al. Fabrication of photonic-crystal structures by tertiary-butyl arsine-based metal–organic vapor-phase epitaxy for photonic-crystal lasers. Appl. Phys. Express 9, 062702 (2016).

    Article  Google Scholar 

Download references

Acknowledgements

This work was supported by the ACCEL programme commissioned by the Japan Science and Technology Agency (JST) and the Photon Frontier Network Program of the Ministry of Education, Culture, Sports, Science and Technology (MEXT), and is supported by the New Energy and Industrial Technology Development Organization (NEDO). M.Y. also acknowledges support by a Grant-in-Aid for JSPS Fellows. The authors thank S. Yagi, H. Kitagawa, A. Watanabe, E. Miyai, and W. Kunishi for fruitful discussions.

Author information

Authors and Affiliations

Authors

Contributions

S.N. designed and directed this work. M.Y. fabricated the device with K.I. and M.D.Z. M.Y. measured the lasing characteristics with M.K. Y.T. and J.G. conducted the theoretical analysis of the device. H.R. performed epitaxial growth for the device. M.D.Z and B.S assembled the device. M.Y. wrote the manuscript with S.N. and J.G.

Corresponding author

Correspondence to Susumu Noda.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Sections 1–5, Supplementary Figures 1–5, Supplementary References 1–14

Reporting Summary

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yoshida, M., De Zoysa, M., Ishizaki, K. et al. Double-lattice photonic-crystal resonators enabling high-brightness semiconductor lasers with symmetric narrow-divergence beams. Nature Mater 18, 121–128 (2019). https://doi.org/10.1038/s41563-018-0242-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41563-018-0242-y

This article is cited by

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing