The recent release of hydrogen economy roadmaps for several major countries emphasizes the need for accelerated worldwide investment in research and development activities for hydrogen production, storage, infrastructure and utilization in transportation, industry and the electrical grid. Due to the high gravimetric energy density of hydrogen, the focus of technologies that utilize this fuel has recently shifted from light-duty automotive to heavy-duty vehicle applications. Decades of development of cost-effective and durable polymer electrolyte membrane fuel cells must now be leveraged to meet the increased efficiency and durability requirements of the heavy-duty vehicle market. This Review summarizes the latest market outlooks and targets for truck, bus, locomotive and marine applications. Required changes to the fuel-cell system and operating conditions for meeting Class 8 long-haul truck targets are presented. The necessary improvements in fuel-cell materials and integration are also discussed against the benchmark of current passenger fuel-cell electric vehicles.
Your institute does not have access to this article
Open Access articles citing this article.
Oxygen Evolution Reaction in Energy Conversion and Storage: Design Strategies Under and Beyond the Energy Scaling Relationship
Nano-Micro Letters Open Access 28 April 2022
Nature Communications Open Access 13 October 2021
Nature Communications Open Access 16 August 2021
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
The Future of Hydrogen (International Energy Agency, 2019); https://www.iea.org/reports/the-future-of-hydrogenExtensive study prepared for the G20 in Japan on the status of hydrogen in the global energy system and key near-term opportunities for rapidly expanding hydrogen use.
Road Map to a US Hydrogen Economy (Fuel Cell and Hydrogen Energy Association, 2019); http://www.fchea.org/us-hydrogen-study
Hydrogen Economy Outlook (BloombergNEF, 2020); https://data.bloomberglp.com/professional/sites/24/BNEF-Hydrogen-Economy-Outlook-Key-Messages-30-Mar-2020.pdf
Hydrogen Roadmap Europe (Fuel Cells and Hydrogen Joint Undertaking, 2019); https://www.fch.europa.eu/
Carr, J. Chinese Fuel Cell Industry Developments (Fuel Cell and Hydrogen Energy Association Newsletter, 2019); http://www.fchea.org/in-transition/2019/2/4/chinese-fuel-cell-industry-developments
The National Hydrogen Strategy (Federal Ministry for Economic Affairs and Energy, 2020); https://www.bmbf.de/files/bmwi_Nationale%20Wasserstoffstrategie_Eng_s01.pdf
Fuel Cell Technologies Office Multi-Year Research, Development, and Demonstration Plan (US Department of Energy, 2013); https://www.energy.gov/eere/fuelcells/downloads/fuel-cell-technologies-office-multi-year-research-development-and-22
H2@Scale (US Department of Energy, 2017); https://www.energy.gov/eere/fuelcells/h2scale
Satyapal, S. Hydrogen and Fuel Cell Program Overview (Hydrogen and Fuel Cells Program Annual Merit Review Proceedings, 2019); https://www.hydrogen.energy.gov/pdfs/review19/plenary_overview_satyapal_2019.pdf
Luth, M. Fuel Cell Customers—Medium and Heavy-Duty Transportation (2019); http://www.fchea.org/in-transition/2019/9/2/fuel-cell-customers-medium-and-heavy-duty-transportation
Average Annual Vehicle Miles Traveled by Major Vehicle Category (EERE Alternative Fuels Data Center, 2020); https://afdc.energy.gov/data/
Vehicle Miles Traveled by Highway Category and Vehicle Type (Bureau of Transportation Statistics, 2018); https://www.bts.gov/vehicle-miles-traveled-highway-category-and-vehicle-type
Davis, S. C., Williams, S. E. & Boundy, R. G. Transportation Energy Data Book: Edition 36 (Oak Ridge National Laboratory, 2017).
Fast Facts on Transportation Greenhouse Gas Emissions (US Environmental Protection Agency, 2017); https://www.epa.gov/greenvehicles/fast-facts-transportation-greenhouse-gas-emissions
Annual Energy Outlook 2019 (US Energy Information Administration, 2019); https://www.eia.gov/outlooks/aeo/pdf/aeo2019.pdf
Ding, Y., Cano, Z. P., Yu, A., Lu, J. & Chen, Z. Automotive Li-ion batteries: current status and future perspectives. Electrochem. Energy Rev. 2, 1–28 (2019).
Lutsey, N. & Nicholas, M. Update on Electric Vehicle Costs in the United States through 2030 (The International Council on Clean Transportation, 2019); https://theicct.org/sites/default/files/publications/EV_cost_2020_2030_20190401.pdf
Early Markets: Fuel Cells for Material Handling Equipment (US Department of Energy, 2016); https://www.energy.gov/sites/prod/files/2016/12/f34/fcto_early_markets_mhe_fact_sheet.pdf
Guandalini G. & Campanari S. Well-to-wheel driving cycle simulations for freight transportation: battery and hydrogen fuel cell electric vehicles. In Proc. International Conference of Electrical and Electronic Technologies for Automotive 1–6 (IEEE, 2018).
Eudy, L. Fuel Cell Buses in U.S. Transit Fleets: Current Status 2018 (National Renewable Energy Laboratory, 2018); https://www.nrel.gov/docs/fy19osti/72208.pdf
Lozanovski, A., Whitehouse, N., Ko, N. & Whitehouse, S. Sustainability assessment of fuel cell buses in public transport. Sustainability 10, 1480–1495 (2018).
Ahluwalia, R. K. et al. Total Cost of Ownership for Line Haul, Yard Switchers and Regional Passenger Locomotives—Preliminary Results (H2@Ports Workshop, 2019); https://www.energy.gov/eere/fuelcells/h2rail-workshop
Papadias, D., Ahluwalia, R. K., Connelly, E. & Devlin, P. Total Cost of Ownership Analysis for Hydrogen Fuel Cells in Maritime Applications: Preliminary Results (H2@Ports Workshop, 2019); https://www.energy.gov/eere/fuelcells/h2ports-workshop
Marcinkoski, J. et al. Hydrogen Class 8 Long Haul Truck Targets (US Department of Energy, 2019); https://www.hydrogen.energy.gov/pdfs/19006_hydrogen_class8_long_haul_truck_targets.pdfIdentifies critical technical targets for reducing the cost of ownership of hydrogen fuel cell powered Class 8 tractor-trailers to be to be competitive with diesel-powered vehicles.
Johansson, K. The Effect of Drive Cycles on the Performance of a PEM Fuel Cell System for Automotive Applications (SAE International, 2001); https://www.sae.org/publications/technical-papers/content/2001-01-3454/
Dynamometer Drive Schedules (US Environmental Protection Agency, 2019); https://www.epa.gov/vehicle-and-fuel-emissions-testing/dynamometer-drive-schedules
Greenhouse Gas Emissions and Fuel Efficiency Standards for Medium- and Heavy-Duty Engines and Vehicles—Phase 2 (US Environmental Protection Agency, 2016); https://www.govinfo.gov/content/pkg/FR-2016-10-25/pdf/2016-21203.pdf
Franco, V., Delgado, O. & Muncrief, R. Heavy-Duty Vehicle Fuel-Efficiency Simulation: A Comparison of US and EU Tools (International Council on Clean Transportation, 2015); https://theicct.org/sites/default/files/publications/ICCT_GEM-VECTO-comparison_20150511.pdf
Ahluwalia, R. K., Wang, X. & Peng, J.-K. Fuel Cell System Modeling and Analysis (Hydrogen and Fuel Cells Program Annual Merit Review Proceedings, 2020); https://www.hydrogen.energy.gov/pdfs/review20/fc017_ahluwalia_2020_o.pdf
Yu, Y. et al. A review on performance degradation of proton exchange membrane fuel cells during startup and shutdown processes: causes, consequences, and mitigation strategies. J. Power Sources 205, 10–23 (2012).
Zhang, T., Wang, P., Chen, H. & Pei, P. A review of automotive proton exchange membrane fuel cell degradation under start-stop operating condition. Appl. Energy 223, 249–262 (2018). A comprehensive review of degradation mechanisms, accelerated lifetime tests and mitigation strategies for PEMFC start-up/shut-down.
Reiser, C. A. et al. A reverse-current decay mechanism for fuel cells. Electrochem. Solid State Lett. 8, A273 (2005).
Kojima, T. Y. A. K. Toyota MIRAI fuel cell vehicle and progress toward a future hydrogen society. Electrochem. Soc. Interface 24, 45–49 (2015).
Gittleman, C. S., Kongkanand, A., Masten, D. & Gu, W. Materials research and development focus areas for low cost automotive proton-exchange membrane fuel cells. Curr. Opin. Electrochem. 18, 81–89 (2019).
Wan, Z., Chang, H., Shu, S., Wang, Y. & Tang, H. A review on cold start of proton exchange membrane fuel cells. Energies 7, 3179–3203 (2014).
Amamou, A. A., Kelouwani, S., Boulon, L. & Agbossou, K. A comprehensive review of solutions and strategies for cold start of automotive proton exchange membrane fuel cells. IEEE Access 4, 4989–5002 (2016).
Cheng, X. et al. A review of PEM hydrogen fuel cell contamination: impacts, mechanisms, and mitigation. J. Power Sources 165, 739–756 (2007).
Wang, X. X., Swihart, M. T. & Wu, G. Achievements, challenges and perspectives on cathode catalysts in proton exchange membrane fuel cells for transportation. Nat. Catal. 2, 578–589 (2019). A comprehensive review of state-of-the-art oxygen reduction reaction electrocatalysts and high-surface-area carbon supports for proton exchange membrane fuel cells.
Chung, D. Y., Yoo, J. M. & Sung, Y. E. Highly durable and active Pt-based nanoscale design for fuel-cell oxygen-reduction electrocatalysts. Adv. Mater. 30, e1704123 (2018).
Banham, D. & Ye, S. Current status and future development of catalyst materials and catalyst layers for proton exchange membrane fuel cells: an industrial perspective. ACS Energy Lett. 2, 629–638 (2017).
Thompson, S. T. & Papageorgopoulos, D. Platinum group metal-free catalysts boost cost competitiveness of fuel cell vehicles. Nat. Catal. 2, 558–561 (2019).
Sneed, B. T., Cullen, D. A., Mukundan, R., Borup, R. L. & More, K. L. PtCo cathode catalyst morphological and compositional changes after PEM fuel cell accelerated stress testing. J. Electrochem. Soc. 165, F3078–F3084 (2018).
Papadias, D. D. et al. Durability of Pt–Co alloy polymer electrolyte fuel cell cathode catalysts under accelerated stress tests. J. Electrochem. Soc. 165, F3166–F3177 (2018).
Ioroi, T., Siroma, Z., Yamazaki, S. I. & Yasuda, K. Electrocatalysts for PEM fuel cells. Adv. Energy Mat. 9, 1801284 (2018).
Yang, Z., Ball, S., Condit, D. & Gummalla, M. Systematic study on the impact of Pt particle size and operating conditions on PEMFC cathode catalyst durability. J. Electrochem. Soc. 158, B1439 (2011).
Gummalla, M. et al. Effect of particle size and operating conditions on Pt3Co PEMFC cathode catalyst durability. Catalysts 5, 926–948 (2015).
Yasuda, K., Taniguchi, A., Akita, T., Ioroi, T. & Siroma, Z. Platinum dissolution and deposition in the polymer electrolyte membrane of a PEM fuel cell as studied by potential cycling. Phys. Chem. Chem. Phys. 8, 746–752 (2006).
Ahluwalia, R. K. et al. Potential dependence of Pt and Co dissolution from platinum–cobalt alloy PEFC catalysts using time-resolved measurements. J. Electrochem. Soc. 165, F3024–F3035 (2018).
Shao-Horn, Y. et al. Instability of supported platinum nanoparticles in low-temperature fuel cells. Top. Catal. 46, 285–305 (2007).
de Bruijn, F. A., Dam, V. A. T. & Janssen, G. J. M. Review: durability and degradation issues of PEM fuel cell components. Fuel Cells 8, 3–22 (2008).
Meier, J. C. et al. Design criteria for stable Pt/C fuel cell catalysts. Beilstein J. Nanotechnol. 5, 44–67 (2014).
Cherevko, S., Kulyk, N. & Mayrhofer, K. J. J. Durability of platinum-based fuel cell electrocatalysts: dissolution of bulk and nanoscale platinum. Nano Energy 29, 275–298 (2016).
Watanabe, M., Yano, H., Uchida, H. & Tryk, D. A. Achievement of distinctively high durability at nanosized Pt catalysts supported on carbon black for fuel cell cathodes. J. Electroanal. Chem. 819, 359–364 (2018).
Xin, H. L. et al. Atomic-resolution spectroscopic imaging of ensembles of nanocatalyst particles across the life of a fuel cell. Nano Lett. 12, 490–497 (2012).
Lohse-Busch, H. et al. Technology Assessment of a Fuel Cell Vehicle: 2017 Toyota Mirai (Argonne National Laboratory, 2018).
Borup, R. L. et al. Recent developments in catalyst-related PEM fuel cell durability. Curr. Opin. Electrochem. 21, 192–200 (2020).
Braaten, J., Kongkanand, A. & Litster, S. Oxygen transport effects of cobalt cation contamination of ionomer thin films in proton exchange membrane fuel cells. ECS Trans. 80, 283–290 (2017).
Li, J. et al. Hard-magnet L10-CoPt nanoparticles advance fuel cell catalysis. Joule 3, 124–135 (2019).
Yin Xiong, Y. Y. et al. Revealing the atomic ordering of binary intermetallics using in situ heating techniques at multilength scales. Proc. Natl Acad. Sci. USA 116, 1974–1983 (2019).
Padgett, E. et al. Mitigation of PEM fuel cell catalyst degradation with porous carbon supports. J. Electrochem. Soc. 166, F198–F207 (2019). An investigation of the impact of carbon support morphology, ranging from porous to solid, on the performance and durability of Pt and PtCo alloy nanoparticle cathode electrocatalysts.
Yarlagadda, V. et al. Boosting fuel cell performance with accessible carbon mesopores. ACS Energy Lett. 3, 618–621 (2018).
Wang, Y. J., Wilkinson, D. P. & Zhang, J. Noncarbon support materials for polymer electrolyte membrane fuel cell electrocatalysts. Chem. Rev. 111, 7625–7651 (2011).
Sui, S. et al. A comprehensive review of Pt electrocatalysts for the oxygen reduction reaction: nanostructure, activity, mechanism and carbon support in PEM fuel cells. J. Mater. Chem. A 5, 1808–1825 (2017).
Qiao, Z. et al. 3D porous graphitic nanocarbon for enhancing the performance and durability of Pt catalysts: a balance between graphitization and hierarchical porosity. Energy Environ. Sci. 12, 2830–2841 (2019).
Cheng, N. et al. Extremely stable platinum nanoparticles encapsulated in a zirconia nanocage by area-selective atomic layer deposition for the oxygen reduction reaction. Adv. Mater. 27, 277–281 (2015).
Chen, Y. et al. Pt–SnO2/nitrogen-doped CNT hybrid catalysts for proton-exchange membrane fuel cells (PEMFC): effects of crystalline and amorphous SnO2 by atomic layer deposition. J. Power Sources 238, 144–149 (2013).
Yamada, H., Kato, H. & Kodama, K. Cell performance and durability of Pt/C cathode catalyst covered by dopamine derived carbon thin layer for polymer electrolyte fuel cells. J. Electrochem. Soc. 167, 084508 (2020).
Schmidt, T. J. et al. Characterization of high-surface-area electrocatalysts using a rotating disk electrode configuration. J. Electrochem. Soc. 145, 2354–2358 (1998).
Gilbert, J. A. et al. In-operando anomalous small-angle X-Ray scattering investigation of Pt3Co catalyst degradation in aqueous and fuel cell environments. J. Electrochem. Soc. 162, F1487–F1497 (2015).
Tian, N. et al. Rational design and synthesis of low-temperature fuel cell clectrocatalysts. Electrochem. Energy Rev. 1, 54–83 (2018).
Yandrasits, M., Lindell, M., Schaberg, M. & Kurkowski, M. Increasing fuel cell efficiency by using ultra-low equivalent weight ionomers. Electrochem. Soc. Interface 26, 49–53 (2017). Discusses the material design paths toward lower equivalent-weight ionomers via side-chain chemistry modifications to enable higher conductivity at low humidity for increased fuel-cell efficiency.
Kusoglu, A. et al. Impact of substrate and processing on confinement of nafion thin films. Adv. Funct. Mater. 24, 4763–4774 (2014).
Gubler, L., Nauser, T., Coms, F. D., Lai, Y.-H. & Gittleman, C. S. Perspective—prospects for durable hydrocarbon-based fuel cell membranes. J. Electrochem. Soc. 165, F3100–F3103 (2018). Perspective on critical breakthroughs required to replace PFSA with hydrocarbon-based membranes that are currently limited by radical-induced degradation and mechanical failure.
Elabd, Y. A. & Hickner, M. A. Block copolymers for fuel cells. Macromolecules 44, 1–11 (2011).
Kusoglu, A. & Weber, A. Z. New insights into perfluorinated sulfonic-acid ionomers. Chem. Rev. 117, 987–1104 (2017).
Kusoglu, A., Dursch, T. J. & Weber, A. Z. Nanostructure/swelling relationships of bulk and thin-film PFSA ionomers. Adv. Funct. Mater. 26, 4961–4975 (2016).
Su, G. M. et al. Chemical and morphological origins of improved ion conductivity in perfluoro ionene chain extended ionomers. J. Am. Chem. Soc. 141, 13547–13561 (2019).
Redmond, E. L., Wriston, S. M. & Szarka, J. L. III Full factorial experiment to determine and predict impact of cerium amount on fuel cell performance. ECS Trans. 80, 633–641 (2017).
Kongkanand, A. & Mathias, M. F. The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells. J. Phys. Chem. Lett. 7, 1127–1137 (2016).
Kudo, K., Jinnouchi, R. & Morimoto, Y. Humidity and temperature dependences of oxygen transport resistance of nafion thin film on platinum electrode. Electrochim. Acta 209, 682–690 (2016).
Van Cleve, T. et al. Dictating Pt-based electrocatalyst performance in polymer electrolyte fuel cells; from formulation to application. ACS Appl. Mater. Interfaces https://doi.org/10.1021/acsami.9b17614 (2019).
Eastman, S. A. et al. Effect of confinement on structure, water solubility, and water transport in nafion thin films. Macromolecules 45, 7920–7930 (2012).
Cetinbas, F. C., Ahluwalia, R. K., Kariuki, N. N., De Andrade, V. & Myers, D. J. Effects of porous carbon morphology, agglomerate structure and relative humidity on local oxygen transport resistance. J. Electrochem. Soc. 167, 013508 (2019).
Weber, A. Z. & Kusoglu, A. Unexplained transport resistances for low-loaded fuel-cell catalyst layers. J. Mater. Chem. A 2, 17207–17211 (2014).
Kodama, K. et al. Effect of the side-chain structure of perfluoro-sulfonic acid ionomers on the oxygen reduction reaction on the surface of Pt. ACS Catal. 8, 694–700 (2018).
Nagao, Y. Proton-conductivity enhancement in polymer thin films. Langmuir 33, 12547–12558 (2017).
Jinnouchi, R., Kudo, K., Kitano, N. & Morimoto, Y. Molecular dynamics simulations on O2 permeation through nafion ionomer on platinum surface. Electrochim. Acta 188, 767–776 (2016).
Ono, Y., Ohma, A., Shinohara, K. & Fushinobu, K. Influence of equivalent weight of ionomer on local oxygen transport resistance in cathode catalyst layers. J. Electrochem. Soc. 160, F779–F787 (2013).
Kusoglu, A. in Encyclopedia of Sustainability Science and Technology (ed. Meyers, R. A.) Ch. 1021-2, 1–3 (Springer, 2018).
Tesfaye, M., MacDonald, A. N., Dudenas, P. J., Kusoglu, A. & Weber, A. Z. Exploring substrate/ionomer interaction under oxidizing and reducing environments. Electrochem. Commun. 87, 86–90 (2018).
Ohma, A. et al. Analysis of proton exchange membrane fuel cell catalyst layers for reduction of platinum loading at Nissan. Electrochim. Acta 56, 10832–10841 (2011).
Cetinbas, F. C. et al. Hybrid approach combining multiple characterization techniques and simulations for microstructural analysis of proton exchange membrane fuel cell electrodes. J. Power Sources 344, 62–73 (2017).
Chen, Y. et al. Electrochemical study of temperature and Nafion effects on interface property for oxygen reduction reaction. Ionics 24, 3905–3914 (2018).
Li, Y. et al. Modifying the electrocatalyst–ionomer interface via sulfonated poly(ionic liquid) block copolymers to enable high-performance polymer electrolyte fuel cells. ACS Energy Lett. 5, 1726–1731 (2020). Achieved ionomer-free Pt specific activity in an MEA, thereby enhancing performance across a range of relative humidity using novel ionomers and a mixed ionomer electrode.
Latorrata, S. et al. Effect of rheology controller agent addition to micro-porous layers on PEMFC performances. Solid State Ion. 216, 73–77 (2012).
Spernjak, D. et al. Enhanced water management of polymer electrolyte fuel cells with additive-containing microporous layers. ACS Appl. Energy Mater. 1, 6006–6017 (2018).
Steinbach, A. J. et al. Anode-design strategies for improved performance of polymer-electrolyte fuel cells with ultra-thin electrodes. Joule 2, 1297–1312 (2018).
James, B. Fuel Cell Vehicle and Bus Cost Analysis (Hydrogen and Fuel Cells Program Annual Merit Review Proceedings, 2016); https://www.hydrogen.energy.gov/pdfs/review16/fc018_james_2016_o.pdf
James, B. Fuel Cell Systems Analysis (Hydrogen and Fuel Cells Program Annual Merit Review Proceedings, 2020); https://www.hydrogen.energy.gov/pdfs/review20/fc163_james_2020_o.pdf
How Hydrogen Empowers the Energy Transition (Hydrogen Council, 2017); https://hydrogencouncil.com/wp-content/uploads/2017/06/Hydrogen-Council-Vision-Document.pdf
Fuel Cell Truck Powertrain R&D Activities and Target Review Workshop (US Department of Energy, 2018); https://www.energy.gov/eere/fuelcells/fuel-cell-truck-powertrain-rd-activities-and-target-review-workshop-h2-scale-end-use
Geyer, H. K. & Ahluwalia, R. K. GCtool for fuel cell system design and analysis: user documentation ANL-98/8 (Argonne National Laboratory, 1998); https://inldigitallibrary.inl.gov/Reports/ANL-98-8.pdf
Borup, R. L. & Weber, A. Z. FC-PAD: Fuel Cell Performance and Durability Consortium (Hydrogen and Fuel Cells Program Annual Merit Review Proceedings, 2020); https://www.hydrogen.energy.gov/pdfs/review20/fc135_borup_weber_2020_o.pdf
Van Cleve, T. et al. Tailoring electrode microstructure via ink content to enable improved rated power performance for platinum cobalt/high surface area carbon based polymer electrolyte fuel cells. J. Power Sources https://doi.org/10.1016/j.jpowsour.2020.228889 (2021).
Greszler, T. A., Caulk, D. & Sinha, P. The impact of platinum loading on oxygen transport resistance. J. Electrochem. Soc. 159, F831–F840 (2012).
Haug, A. Novel Ionomers and Electrode Structures for Improved PEMFC Electrode Performance at Low PGM Loadings (Hydrogen and Fuel Cells Program Annual Merit Review Proceedings, 2019); https://www.hydrogen.energy.gov/pdfs/review19/fc155_haug_2019_o.pdf
Borup, R. L. & Weber, A. Z. FC-PAD: Fuel Cell Performance and Durability Consortium (Hydrogen and Fuel Cells Program Annual Merit Review Proceedings, 2019); https://www.hydrogen.energy.gov/pdfs/review19/fc135_borup_2019_o.pdf
Borup, R. L., More, K. L. & Weber, A. Z. FC-PAD: Fuel Cell Performance and Durability Consortium (Hydrogen and Fuel Cells Program Annual Merit Review Proceedings, 2018); https://www.hydrogen.energy.gov/pdfs/review18/fc135_borup_2018_o.pdf
This work was supported by the Hydrogen and Fuel Cell Technologies Office (HFTO), Office of Energy Efficiency and Renewable Energy, US Department of Energy (DOE) through the Fuel Cell Performance and Durability (FC-PAD) and Million Mile Fuel Cell Truck (M2FCT) consortia, technology managers G. Kleen and D. Papageorgopoulos. It is also supported by Lawrence Berkeley National Laboratory under contract no. DE-AC02-05CH11231, the Center for Nanophase Materials Sciences, which is a DOE Office of Science User Facility at Oak Ridge National Laboratory under contract no. DE-AC05-00OR22725, Los Alamos National Laboratory under contract no. 89233218CNA000001, the National Renewable Energy Laboratory, operated by Alliance for Sustainable Energy, LLC, for the US DOE under contract no. DE-AC36-08GO28308 and by UChicago Argonne, LLC, Operator of Argonne National Laboratory, a US Department of Energy Office of Science laboratory operated under contract no. DE-AC02-06CH11357. The views expressed in the article do not necessarily represent the views of the DOE or the US government.
The authors declare no competing interests.
Peer review information Nature Energy thanks Viktor Johanek, Jiujun Zhang and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Cullen, D.A., Neyerlin, K.C., Ahluwalia, R.K. et al. New roads and challenges for fuel cells in heavy-duty transportation. Nat Energy 6, 462–474 (2021). https://doi.org/10.1038/s41560-021-00775-z
Nature Energy (2022)
Graphene-nanopocket-encaged PtCo nanocatalysts for highly durable fuel cell operation under demanding ultralow-Pt-loading conditions
Nature Nanotechnology (2022)
Atomically dispersed iron sites with a nitrogen–carbon coating as highly active and durable oxygen reduction catalysts for fuel cells
Nature Energy (2022)
Oxygen Evolution Reaction in Energy Conversion and Storage: Design Strategies Under and Beyond the Energy Scaling Relationship
Nano-Micro Letters (2022)
Nature Communications (2021)