Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

A full and heterogeneous model of the ITER tokamak for comprehensive nuclear analyses

Nature Energy volume 6, pages 150–157 (2021)Cite this article

Subjects

Abstract

ITER is the flagship fusion project, conceived as an experiment to select and develop the technologies for the first demonstration reactor, DEMO. Nuclear analysis is a core discipline in support of the design, commissioning and operation of the machine. To date, it has been conducted with increasingly detailed partial models, which represented toroidal segments of the tokamak. However, the limitations of this methodology became evident as estimates of quantities relevant to design, safety and operation showed unquantifiable uncertainties, which is a risk. Here, we present a detailed and realistic 360° MCNP model of the ITER tokamak called E-lite. We demonstrate the model’s usability and practicality. Two examples are used to illustrate qualitatively and quantitatively how it solves previously intractable problems with marked benefits for the future nuclear analysis of ITER, with applications to DEMO and future reactors. E-lite constitutes a milestone in the field of nuclear analysis in terms of realism in the evaluation of key quantities.

This is a preview of subscription content, access via your institution

Access options

Buy this article

  • Purchase on SpringerLink
  • Instant access to full article PDF
Buy now

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: E-lite model representing the 360° of the ITER tokamak.
Fig. 2: Description of the calibration exercise.
Fig. 3: Representation of the neutron flux computed with E-lite.
Fig. 4: Neutron flux impinging on the inner face of the bio-shield.

Similar content being viewed by others

Data availability

Data and the model are the intellectual property of the ITER Organization. Data of the main text and the supplementary information will be made available upon reasonable request after the recipients confirm in writing that the purpose of obtaining the data is only to reproduce the results and after the recipients have signed and returned a non-disclosure agreement confirming that no part of the data will be distributed in any way. Data for the tritium breeding module ports will not be made available, as they are subject to additional intellectual property restrictions.

Code availability

The MCNP5 v.1.60 code2 is distributed by the Radiation Safety Information Computational Center (RSICC, Oak Ridge National Laboratory) under user licences, following the procedure provided online (https://mcnp.lanl.gov/mcnp_how_to_get_to_mcnp.shtml). The D1SUNED v.3.1.4 code11, which is developed by UNED, is a proprietary patch-code to MCNP5 v.1.60. The code will be made available on reasonable request after the recipients confirm in writing that the purpose of obtaining the code is only to reproduce the results and after the recipients have signed and returned a non-disclosure agreement confirming that no part of the code will be distributed in any way.

References

  1. Wu, Y. et al. Identification of safety gaps for fusion demonstration reactors. Nat. Energy 1, 16154 (2016).

    Article  Google Scholar 

  2. X-5 Monte Carlo Team. MCNP—A General Monte Carlo N-Particle Transport Code, Version 5. Vol. I: Overview and Theory Report No. LA-UR-03-1987 (Los Alamos National Laboratory, 2003).

  3. Leichtle, D. et al. The ITER tokamak neutronics reference model C-Model. Fusion Eng. Des. 136, 742–746 (2018).

    Article  Google Scholar 

  4. Pereslavtsev, P. et al. Modelling and shielding analysis of the neutral beam injector ports in ITER. Fusion Eng. Des. 98–99, 1585–1588 (2015).

    Article  Google Scholar 

  5. Yang, J., Wilson, S. C., Mosher, S. W. & Radulescu, G. Integration of the full tokamak reference model with the Complex model for ITER neutronics analysis. Fusion Sci. Technol. 74, 277–287 (2018).

    Article  Google Scholar 

  6. Alguacil, J., Sauvan, P., Juarez, R. & Catalan, J. P. Assessment and optimization of MCNP memory management for detailed geometry of nuclear fusion facilities. Fusion Eng. Des. 136, 386–389 (2018).

    Article  Google Scholar 

  7. Juárez, R. et al. Shutdown dose rates at ITER equatorial ports considering radiation cross-talk from torus cryopump lower port. Fusion Eng. Des. 100, 501–506 (2015).

    Article  Google Scholar 

  8. Travleev, A. et al. Nuclear analysis of the ITER In-Vessel viewing system. Fusion Eng. Des. 136, 247–251 (2018).

    Article  Google Scholar 

  9. Juárez, R. et al. ITER plasma source and building modelling to produce radiation maps. Nucl. Fusion 58, 126012 (2018).

    Article  Google Scholar 

  10. Pampin, P. et al. Overview of nuclear integration activities for mitigation of radiation loads to ITER superconducting magnets. Trans. Am. Nucl. Soc. 116, 247–250 (2017).

    Google Scholar 

  11. Sauvan, P. et al. D1SUNED system for the determination of decay photon related quantities. Fusion Eng. Des. 151, 111399 (2020).

    Article  Google Scholar 

  12. Mosher, S. W. & Wilson, S. C. Algorithmic improvements to MCNP5 for high-resolution fusion neutronics analyses. Fusion Sci. Technol. 74, 263–276 (2018).

    Article  Google Scholar 

  13. van Wijk, A. J., Van den Eynde, G. & Hoogenboom, J. E. An easy to implement global variance reduction procedure for MCNP. Ann. Nucl. Energy 38, 2496–2503 (2011).

    Article  Google Scholar 

  14. Batistoni, P. On the absolute calibration of neutron measurement in fusion reactors. Fusion Eng. Des. 105, 58–69 (2016).

    Article  Google Scholar 

  15. Bertalot, L. et al. Present status of ITER neutron diagnostics development. J. Fusion Energy 38, 283–290 (2019).

    Article  Google Scholar 

  16. Snoj, L. et al. Neutronic analysis of JET external neutron monitor response. Fusion Eng. Des. 109–111, 99–103 (2016).

    Article  Google Scholar 

  17. Snoj, L. et al. Calculations to support JET neutron yield calibration: modelling of the JET remote handling system. Nucl. Eng. Des. 261, 244–250 (2013).

    Article  Google Scholar 

  18. Strachan, J. D. et al. Neutron calibration techniques for comparison of tokamak results. Rev. Sci. Instrum. 61, 3501–3504 (1990).

    Article  Google Scholar 

  19. Barnes, C. W., Larson, A. R., LeMunyan, G. & Loughlin, M. J. Measurements of DT and DD neutron yields by neutron activation on the Tokamak Fusion Test Reactor. Rev. Sci. Instrum. 66, 888–890 (1995).

    Article  Google Scholar 

  20. Bertalot, L., Roquemore, A. L., Loughlin, M. & Esposito, B. Calibration of the JET neutron activation system for DT operation. Rev. Sci. Instrum. 70, 1137–1140 (1999).

    Article  Google Scholar 

  21. Batistoni, P. et al. 14 MeV calibration of JET neutron detectors—phase 1: calibration and characterization of the neutron source. Nucl. Fusion 58, 026012 (2018).

    Article  Google Scholar 

  22. Batistoni, P. et al. 14 MeV calibration of JET neutron detectors—phase 2: in-vessel calibration. Nucl. Fusion 58, 106016 (2018).

    Article  Google Scholar 

  23. Strachan, J. et al. Absolute calibration of TFTR helium proportional counters. Rev. Sci. Instrum. 66, 1247–1251 (1995).

    Article  Google Scholar 

  24. Stammers, K. & Loughlin, M. J. The calibration of the MAST neutron yield monitors. Nucl. Instrum. Methods Phys. Res. A 562, 521–530 (2006).

    Article  Google Scholar 

  25. Nishitani, T. et al. Absolute calibration of the JT-60U neutron monitors using a 252Cf neutron source. Rev. Sci. Instrum. 63, 4558 (1992).

    Article  Google Scholar 

  26. Isobe, M. et al. Neutron diagnostics in the Large Helical Device. IEEE Trans. Plasma Sci. 46, 2050–2058 (2018).

    Article  Google Scholar 

  27. López-Revelles, A. J. et al. MCNP model of the ITER Tokamak Complex. Fusion Eng. Des. 136, 859–863 (2018).

    Article  Google Scholar 

  28. Ghani, Z. et al. Radiation levels in the ITER tokamak complex during and after plasma operation. Fusion Eng. Des. 96–97, 261–264 (2015).

    Article  Google Scholar 

  29. INR-KIT/numjuggler (GitHub, 2016); https://github.com/inr-kit/numjuggler.

  30. FENDL-3.1d: Fusion Evaluated Nuclear Data Library v.3.1d (International Atomic Energy Agency, 2018); https://www-nds.iaea.org/fendl/

Download references

Acknowledgements

This work was carried out using an adaption of the C-model MCNP model that was developed as a collaborative effort between the Amec company (international), Culham Centre for Fusion Energy (United Kingdom), Frascati Research Centre of the National Agency for New Technologies, Energy and Sustainable Economic Development (Italy), FDS Team of the Institute of Nuclear Energy Safety Technology (People’s Republic of China), ITER Organization (France), Japan Atomic Energy Agency in Naka (Japan), National Distance Education University (UNED) (Spain), Fusion for Energy (Spain) and University of Wisconsin – Madison (United States). This work was performed under ITER contract IO/CT/13/6-141 between the ITER Organization and the consortium consisting of UNED and the IDOM Corporation. We appreciate the support given by MINECO for the funding of the Juan de la Cierva-incorporación 2016 programme and funding under I+D+i-Retos Investigación (project ENE2015-70733R), by the Comunidad de Madrid for funding under I+D en Tecnologías (TECHNOFUSIÓN (III)-CM, project S2018/EMT-4437), by the Escuela Técnica Superior de Ingenieros Industriales-UNED 2019 programme, and by UNED for funding of the predoctoral contract (Formación Personal Investigador). We thank L. Bertalot from the ITER Organization for his support and indications in relation to ITER neutron calibration. The views expressed in this publication are the sole responsibility of the authors and do not necessarily reflect the views of Fusion for Energy or of the ITER Organization. Neither of these institutions nor any person acting on their behalf is responsible for the use that might have been made of information in this publication. The content of this paper does not commit the ITER Organization to being a nuclear operator.

Author information

Author notes

  1. These authors contributed equally: R. Juarez, G. Pedroche.

Authors and Affiliations

  1. Departamento de Ingeniería Energética, Universidad Nacional de Educación a Distancia (UNED), Madrid, Spain

    R. Juarez, G. Pedroche, P. Martinez, M. De Pietri, J. Alguacil, F. Ogando, P. Sauvan, A. J. Lopez-Revelles, A. Kolšek & J. Sanz

  2. ITER Organization, Saint-Paul-lez-Durance, France

    M. J. Loughlin & E. Polunovskiy

  3. Fusion for Energy (F4E), Barcelona, Spain

    R. Pampin & M. Fabbri

Authors
  1. R. Juarez
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. G. Pedroche
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. M. J. Loughlin
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. R. Pampin
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. P. Martinez
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. M. De Pietri
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. J. Alguacil
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. F. Ogando
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. P. Sauvan
    View author publications

    You can also search for this author in PubMed Google Scholar

  10. A. J. Lopez-Revelles
    View author publications

    You can also search for this author in PubMed Google Scholar

  11. A. Kolšek
    View author publications

    You can also search for this author in PubMed Google Scholar

  12. E. Polunovskiy
    View author publications

    You can also search for this author in PubMed Google Scholar

  13. M. Fabbri
    View author publications

    You can also search for this author in PubMed Google Scholar

  14. J. Sanz
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

R.J. and G.P., with M.J.L., E.P., R.P. and M.F., conceived the model. G.P. created the model with the support of P.M., M.D.P., J.A., A.J.L.-R. and A.K. R.J. and G.P. conceived the analysis, executed it with the support of P.S. and F.O., and interpreted the data with the support of M.J.L., R.P. and J.S.

Corresponding author

Correspondence to R. Juarez.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature Energy thanks Paul Wilson, Yican Wu and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Figs. 1–4, Table 1, discussion and references

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Juarez, R., Pedroche, G., Loughlin, M.J. et al. A full and heterogeneous model of the ITER tokamak for comprehensive nuclear analyses. Nat Energy 6, 150–157 (2021). https://doi.org/10.1038/s41560-020-00753-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41560-020-00753-x

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing