Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

  • Article
  • Published:

Monolithic solid–electrolyte interphases formed in fluorinated orthoformate-based electrolytes minimize Li depletion and pulverization

Abstract

Lithium (Li) pulverization and associated large volume expansion during cycling is one of the most critical barriers for the safe operation of Li-metal batteries. Here, we report an approach to minimize the Li pulverization using an electrolyte based on a fluorinated orthoformate solvent. The solid–electrolyte interphase (SEI) formed in this electrolyte clearly exhibits a monolithic feature, which is in sharp contrast with the widely reported mosaic- or multilayer-type SEIs that are not homogeneous and could lead to uneven Li stripping/plating and fast Li and electrolyte depletion over cycling. The highly homogeneous and amorphous SEI not only prevents dendritic Li formation, but also minimizes Li loss and volumetric expansion. Furthermore, this new electrolyte strongly suppresses the phase transformation of the LiNi0.8Co0.1Mn0.1O2 cathode (from layered structure to rock salt) and stabilizes its structure. Tests of high-voltage Li||NMC811 cells show long-term cycling stability and high rate capability, as well as reduced safety concerns.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: SEI on the Li anode.
Fig. 2: Electrochemical performances of different electrolytes.
Fig. 3: Li consumption and volumetric expansion after 100 cycles in Li||NMC811 cells.
Fig. 4: SEI information obtained by XPS measurement on Li electrodes after 100 cycles in Li||NMC811 cells with electrolytes.
Fig. 5: Structural and CEI/SEI properties of the electrodes.

Similar content being viewed by others

Data availability

The data that support the plots within this paper and other findings of this study are available from the corresponding author upon reasonable request.

References

  1. Whittingham, M. S. Ultimate limits to intercalation reactions for lithium batteries. Chem. Rev. 114, 11414–11443 (2014).

    Article  Google Scholar 

  2. Zhang, J.-G., Xu, W. & Henderson, W. A. Lithium Metal Anode and Rechargeable Li Metal Batteries (Springer International Publishing, 2017).

  3. Liu, J. et al. Pathways for practical high-energy long-cycling lithium metal batteries. Nat. Energy 4, 180–186 (2019).

    Article  Google Scholar 

  4. Lin, D., Liu, Y. & Cui, Y. Reviving the lithium metal anode for high-energy batteries. Nat. Nanotechnol. 12, 194–206 (2017).

    Article  Google Scholar 

  5. Wang, J. et al. Superconcentrated electrolytes for a high-voltage lithium-ion battery. Nat. Commun. 7, 12032 (2016).

    Article  Google Scholar 

  6. Erickson, E. M. et al. Review—development of advanced rechargeable batteries: a continuous challenge in the choice of suitable electrolyte solutions. J. Electrochem. Soc. 162, A2424–A2438 (2015).

    Article  Google Scholar 

  7. Cheng, X.-B., Zhang, R., Zhao, C.-Z. & Zhang, Q. Toward safe lithium metal anode in rechargeable batteries: a review. Chem. Rev. 117, 10403–10473 (2017).

    Article  Google Scholar 

  8. Ding, M. S., von Cresce, A. & Xu, K. Conductivity, viscosity, and their correlation of a super-concentrated aqueous electrolyte. J. Phys. Chem. C. 121, 2149–2153 (2017).

    Article  Google Scholar 

  9. Liu, B., Zhang, J.-G. & Xu, W. Advancing lithium metal batteries. Joule 2, 833–845 (2018).

    Article  Google Scholar 

  10. Pang, Q. et al. Tuning the electrolyte network structure to invoke quasi-solid state sulfur conversion and suppress lithium dendrite formation in Li–S batteries. Nat. Energy 3, 783–791 (2018).

    Article  Google Scholar 

  11. Chen, S. et al. High-efficiency lithium metal batteries with fire-retardant electrolytes. Joule 2, 1548–1558 (2018).

    Article  Google Scholar 

  12. Ren, X. et al. Localized high-concentration sulfone electrolytes for high-efficiency lithium-metal batteries. Chem 4, 1877–1892 (2018).

    Article  Google Scholar 

  13. Li, N.-W. et al. A flexible solid electrolyte interphase layer for long-life lithium metal anodes. Angew. Chem. Int. Ed. 57, 1505–1509 (2018).

    Article  Google Scholar 

  14. Fan, X. et al. Non-flammable electrolyte enables Li-metal batteries with aggressive cathode chemistries. Nat. Nanotechnol. 13, 715–722 (2018).

    Article  Google Scholar 

  15. Zeng, Z. et al. Non-flammable electrolytes with high salt-to-solvent ratios for Li-ion and Li-metal batteries. Nat. Energy 3, 674–681 (2018).

    Article  Google Scholar 

  16. Jiao, S. H. et al. Stable cycling of high-voltage lithium metal batteries in ether electrolytes. Nat. Energy 3, 739–746 (2018).

    Article  Google Scholar 

  17. Aurbach, D., Zinigrad, E., Cohen, Y. & Teller, H. A short review of failure mechanisms of lithium metal and lithiated graphite anodes in liquid electrolyte solutions. Solid State Ion. 148, 405–416 (2002).

    Article  Google Scholar 

  18. Peled, E. & Menkin, S. Review—SEI: past, present and future. J. Electrochem. Soc. 164, A1703–A1719 (2017).

    Article  Google Scholar 

  19. Li, Y. et al. Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy. Science 358, 506–510 (2017).

    Article  Google Scholar 

  20. Xu, K. Electrolytes and interphases in li-ion batteries and beyond. Chem. Rev. 114, 11503–11618 (2014).

    Article  Google Scholar 

  21. Wang, X. et al. New insights on the structure of electrochemically deposited lithium metal and its solid electrolyte interphases via cryogenic TEM. Nano Lett. 17, 7606–7612 (2017).

    Article  Google Scholar 

  22. Noh, H.-J., Youn, S., Yoon, C. S. & Sun, Y.-K. Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteries. J. Power Sources 233, 121–130 (2013).

    Article  Google Scholar 

  23. Yan, G. et al. Fluorinated solvents for high-voltage electrolyte in lithium-ion battery. J. Solid State Electrochem. 21, 1589–1597 (2017).

    Article  Google Scholar 

  24. Xu, K. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. Chem. Rev. 104, 4303–4418 (2004).

    Article  Google Scholar 

  25. Cao, X. et al. High voltage LiNi0.5Mn1.5O4/Li4Ti5O12 lithium ion cells at elevated temperatures: carbonate- versus ionic liquid-based electrolytes. ACS Appl. Mater. Interfaces 8, 25971–25978 (2016).

    Article  Google Scholar 

  26. Park, M. S. et al. A highly reversible lithium metal anode. Sci. Rep. 4, 3815 (2014).

    Article  Google Scholar 

  27. Zhang, Z. et al. Fluorinated electrolytes for 5 V lithium-ion battery chemistry. Energy Environ. Sci. 6, 1806–1810 (2013).

    Article  Google Scholar 

  28. Fan, X. et al. Highly fluorinated interphases enable high-voltage Li-metal batteries. Chem 4, 174–185 (2018).

    Article  Google Scholar 

  29. Noguchi, T., Hasegawa, T., Yamauchi, H., Yamazaki, I. & Utsugi, K. Effect of using fluorinated ether and sulfone as electrolyte solvents for lithium ion batteries with lithium-rich layered cathodes and silicon oxide anodes. ECS Trans. 80, 291–303 (2017).

    Article  Google Scholar 

  30. Suo, L. et al. Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries. Proc. Natl Acad. Sci. USA 115, 1156–1161 (2018).

    Article  Google Scholar 

  31. Böttcher, T. et al. in Advanced Fluoride-Based Materials for Energy Conversion (eds Nakajima, T. & Groult, H.) 125–145 (Elsevier, 2015).

  32. Moon, H. et al. Solvent activity in electrolyte solutions controls electrochemical reactions in Li-ion and Li-sulfur batteries. J. Phys. Chem. C 119, 3957–3970 (2015).

    Article  Google Scholar 

  33. Yu, L. et al. A localized high-concentration electrolyte with optimized solvents and lithium difluoro(oxalate)borate additive for stable lithium metal batteries. ACS Energy Lett. 3, 2059–2067 (2018).

    Article  Google Scholar 

  34. Zheng, J. et al. Extremely stable sodium metal batteries enabled by localized high-concentration electrolytes. ACS Energy Lett. 3, 315–321 (2018).

    Article  Google Scholar 

  35. Doi, T., Shimizu, Y., Hashinokuchi, M. & Inaba, M. Dilution of highly concentrated LiBF4/propylene carbonate electrolyte solution with fluoroalkyl ethers for 5-V LiNi0.5Mn1.5O4 positive electrodes. J. Electrochem. Soc. 164, A6412–A6416 (2017).

    Article  Google Scholar 

  36. Chen, S. et al. High-voltage lithium-metal batteries enabled by localized high-concentration electrolytes. Adv. Mater. 30, 1706102 (2018).

    Article  Google Scholar 

  37. Yamada, Y. & Yamada, A. Review—superconcentrated electrolytes for lithium batteries. J. Electrochem. Soc. 162, A2406–A2423 (2015).

    Article  Google Scholar 

  38. Yamada, Y. et al. Unusual stability of acetonitrile-based superconcentrated electrolytes for fast-charging lithium-ion batteries. J. Am. Chem. Soc. 136, 5039–5046 (2014).

    Article  Google Scholar 

  39. Qian, J. et al. High rate and stable cycling of lithium metal anode. Nat. Commun. 6, 6362 (2015).

    Article  Google Scholar 

  40. Ren, X. et al. Enabling high-voltage lithium metal batteries under practical conditions. Joule 3, 1662–1676 (2019).

    Article  Google Scholar 

  41. Von Cresce, A. & Xu, K. Electrolyte additive in support of 5 V Li ion chemistry. J. Electrochem. Soc. 158, A337–A342 (2011).

    Article  Google Scholar 

  42. Tan, S. et al. Tris(hexafluoro-iso-propyl)phosphate as an SEI-forming additive on improving the electrochemical performance of the Li[Li0.2Mn0.56Ni0.16Co0.08]O2 cathode material. J. Electrochem. Soc. 160, A285–A292 (2013).

    Article  Google Scholar 

  43. Von Aspern, N. et al. Phosphorus additives for improving high voltage stability and safety of lithium ion batteries. J. Fluor. Chem. 198, 24–33 (2017).

    Article  Google Scholar 

  44. Ren, X. et al. Localized high-concentration sulfone electrolytes for high-efficiency lithium-metal batteries. Chem 4, 1877–1892 (2018).

    Article  Google Scholar 

  45. Zou, L. et al. Solid–liquid interfacial reaction trigged propagation of phase transition from surface into bulk lattice of Ni-rich layered cathode. Chem. Mater. 30, 7016–7026 (2018).

    Article  Google Scholar 

  46. Wang, C., Meng, Y. S. & Xu, K. Perspective—fluorinating interphases. J. Electrochem. Soc. 166, A5184–A5186 (2019).

    Article  Google Scholar 

  47. Evertz, M. et al. Unraveling transition metal dissolution of Li1.04Ni1/3Co1/3Mn1/3O2 (NCM 111) in lithium ion full cells by using the total reflection X-ray fluorescence technique. J. Power Sources 329, 364–371 (2016).

    Article  Google Scholar 

  48. Cao, X. et al. Ester modified pyrrolidinium based ionic liquids as electrolyte component candidates in rechargeable lithium batteries. Z. Anorg. Allg. Chem. 641, 2536–2542 (2015).

    Article  Google Scholar 

  49. Zhan, C.-G., Nichols, J. A. & Dixon, D. A. Ionization potential, electron affinity, electronegativity, hardness, and electron excitation energy: molecular properties from density functional theory orbital energies. J. Phys. Chem. A 107, 4184–4195 (2003).

    Article  Google Scholar 

  50. Adams, B. D., Zheng, J., Ren, X., Xu, W. & Zhang, J.-G. Accurate determination of coulombic efficiency for lithium metal anodes and lithium metal batteries. Adv. Energy Mater. 8, 1702097 (2018).

    Article  Google Scholar 

Download references

Acknowledgements

This work has been supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Vehicle Technologies Office, of the US Department of Energy (DOE), through the Advanced Battery Materials Research program (Battery500 Consortium) under contract number DE-AC02-05CH11231. The SEM, TEM and XPS were conducted in the William R. Wiley Environmental Molecular Sciences Laboratory—a national scientific user facility sponsored by the DOE’s Office of Biological and Environmental Research and located at the Pacific Northwest National Laboratory. The Pacific Northwest National Laboratory is operated by Battelle for the DOE under the contract DE-AC05-76RL01830. The LiFSI salt was provided by K. Murata of Nippon Shokubai.

Author information

Authors and Affiliations

Authors

Contributions

J.-G.Z., W.X. and X.C. proposed the research and designed the experiments. X.C. performed the electrochemical measurements and conducted the SEM observations, with help from X.R. L.Z., B.E.M., B.W.A. and C.W. performed the focused-ion-beam SEM and TEM. M.H.E. performed the XPS measurements. H.W., W.H. and Y.C. carried out the cryo-EM. C.N. and H.L. prepared the NMC811 electrodes. X.C., W.X. and J.-G.Z. prepared the manuscript, with input from all other co-authors.

Corresponding authors

Correspondence to Wu Xu or Ji-Guang Zhang.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Figs. 1–16

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Cao, X., Ren, X., Zou, L. et al. Monolithic solid–electrolyte interphases formed in fluorinated orthoformate-based electrolytes minimize Li depletion and pulverization. Nat Energy 4, 796–805 (2019). https://doi.org/10.1038/s41560-019-0464-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41560-019-0464-5

This article is cited by

Search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing