Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Hybrid dynamic windows using reversible metal electrodeposition and ion insertion

Nature Energy volume 4, pages 223–229 (2019)Cite this article

Subjects

Abstract

Dynamic windows with electronically controlled transmission reduce glare without obstructing views while increasing the energy efficiency of buildings and automobiles via lighting, heating and cooling savings. Electrochromic materials, which change colour with voltage, are widely explored for use in dynamic windows, but they have not been extensively commercialized due to problems associated with colour, cost, switching speed and durability. Here, we develop a class of dynamic windows that combines reversible metal electrodeposition with ion insertion chemistry. These devices function through the reversible electroplating of Bi and Cu at the working electrode and Li+ insertion in a nickel oxide counter electrode. In one minute, 100 cm2 windows uniformly switch between a clear state with 75% transmission and a colour-neutral black state possessing 10% transmission, which represents a significant improvement over previous metal-based architectures. We demonstrate that these hybrid windows cycle at least 4,000 times without degradation and are compatible with flexible substrates. Lastly, we discuss how this approach can be used to design practical large-scale windows.

This is a preview of subscription content, access via your institution

Access options

Rent or buy this article

Prices vary by article type

from$1.95

to$39.95

Learn more

Prices may be subject to local taxes which are calculated during checkout

Fig. 1: Metal-based dynamic window architectures.
Fig. 2: Transmission profile of 25 cm2 hybrid dynamic window.
Fig. 3: A metal inhibitor on LiNiOx improves device durability.
Fig. 4: Transmission of LiNiOx during lithiation and delithiation.
Fig. 5: Flexible hybrid dynamic windows.
Fig. 6: 100 cm2 hybrid dynamic windows.

Data availability

Data that support the plots in this paper and other findings of this study are available from the corresponding author upon reasonable request.

References

  1. Lee, E. S., Yazdanian, M. & Selkowitz, S. E. The Energy-savings Potential of Electrochromic Windows in the U.S. Commercial Buildings Sector LBNL-54966 (Lawrence Berkeley National Laboratory, 2004).

  2. Jeffers, M. A., Chaney, L. & Rugh, J. P. Climate Control Load Reduction Strategies for Electric Drive Vehicles in Warm Weather (SAE International, 2015).

  3. Mortimer, R. J., Dyer, A. L. & Reynolds, J. R. Electrochromic organic and polymeric materials for display applications. Displays 27, 2–18 (2006).

    Article  Google Scholar 

  4. Runnerstrom, E. L., Llordes, A., Lounis, S. D. & Milliron, D. J. Nanostructured electrochromic smart windows: traditional materials and NIR-selective plasmonic nanocrystals. Chem. Comm. 50, 10555–10572 (2014).

    Article  Google Scholar 

  5. Granqvist, C. G. Electrochromics for smart windows: oxide-based thin films and devices. Thin Solid Films 564, 1–38 (2014).

    Article  Google Scholar 

  6. Nguyen, W. H., Barile, C. J. & McGehee, M. D. Small molecule anchored to mesoporous ITO for high-contrast black electrochromics. J. Phys. Chem. C 120, 26336–26341 (2016).

    Article  Google Scholar 

  7. Thakur, V. K., Ding, G., Ma, J., Lee, P. S. & Lu, X. Hybrid materials and polymer electrolytes for electrochromic device applications. Adv. Mater. 24, 4071–4096 (2012).

    Article  Google Scholar 

  8. Barile, C. J. et al. Dynamic windows with neutral color, high contrast, and excellent durability using reversible metal electrodeposition. Joule 1, 133–145 (2017).

    Article  Google Scholar 

  9. Alcaraz, G. K. A., Juarez-Rolon, J. S., Burpee, N. A. & Barile, C. J. Thermally-stable dynamic windows based on reversible metal electrodeposition from aqueous electrolytes. J. Mater. Chem. C 6, 2132–2138 (2018).

    Article  Google Scholar 

  10. Heavens, O. S. Optical Properties of Thin Solid Films (Dover Publications, New York, 1965).

  11. Barile, C. J., Slotcavage, D. J. & McGehee, M. D. Polymer–nanoparticle electrochromic materials that selectively modulate visible and near-infrared light. Chem. Mater. 28, 1439–1445 (2016).

    Article  Google Scholar 

  12. Niklasson, G. A. & Granqvist, C. G. Electrochromics for smart windows: thin films of tungsten oxide and nickel oxide, and devices based on these. J. Mater. Chem. 17, 127–156 (2007).

    Article  Google Scholar 

  13. Wen, R. T., Granqvist, C. G. & Niklasson, G. A. Eliminating degradation and uncovering ion-trapping dynamics in electrochromic WO3 thin films. Nat. Mater. 14, 996–1001 (2015).

    Article  Google Scholar 

  14. Gamburg, Y. D. & Zangari, G. Theory and Practice of Metal Electrodeposition (Springer, New York, 2011).

  15. Jensen, J., Madsen, M. V. & Krebs, F. C. Photochemical stability of electrochromic polymers and devices. J. Mater. Chem. C 1, 4826–4835 (2013).

    Article  Google Scholar 

  16. Strand, M. T. et al. Factors that determine the length scale for uniform tinting in dynamic windows based on reversible metal electrodeposition. ACS Energy Lett. 3, 2823–2828 (2018).

    Article  Google Scholar 

  17. Tench, D. Morgan & Warren, L. F. Electrodeposition cell with high light transmission. European patent EP1071980A1 (2001).

  18. Hernandez, T. S. et al. Bistable black electrochromic windows based on the reversible metal electrodeposition of Bi and Cu. ACS Energy Lett. 3, 104–111 (2018).

    Article  Google Scholar 

  19. Lu, Y. et al. Mechanism of electrochemical deposition and coloration of electrochromic V2O5 nano thin films: an in situ X-ray spectroscopy study. Nanoscale Res. Lett. 10, 387–392 (2015).

    Article  Google Scholar 

  20. Varsano, F., Decker, F. & Masetti, E. Optically passive cerium containing counter-electrodes for electrochromic devices. Ionics 5, 80–85 (1999).

    Article  Google Scholar 

  21. Greenwood, N. N. & Earnshaw, A. Chemistry of the Elements (Butterworth-Heinemann, Oxford, 1997).

    Google Scholar 

  22. The Energy Benefits of View Dynamic Glass (View Inc., accessed 30 November 2018); https://view.com/assets/pdfs/workplace-demo-room.pdf

  23. Grujicic, D. & Pesic, B. Electrodeposition of copper: the nucleation mechanisms. Electrochim. Acta 47, 2901–2912 (2002).

    Article  Google Scholar 

  24. Kelly, J. J., Tian, C. & West, A. C. Leveling and microstructural effects of additives for copper electrodeposition. J. Electrochem. Soc. 146, 2540–2545 (1999).

    Article  Google Scholar 

  25. Leung, T. Y. B., Kang, M., Corry, B. F. & Gewirth, A. A. Benzotriazole as an additive for copper electrodeposition influence of triazole ring substitution. J. Electrochem. Soc. 147, 3326–3337 (2000).

    Article  Google Scholar 

  26. Araki, S., Nakamura, K., Kobayashi, K., Tsuboi, A. & Kobayashi, N. Electrochemical optical-modulation device with reversible transformation between transparent, mirror, and black. Adv. Mater. 24, OP122–OP126 (2012).

    Google Scholar 

  27. Passerini, S. & Scrosati, B. The intercalation of lithium in nickel oxide and its electrochromic properties. J. Electrochem. Soc. 137, 3297–3300 (1990).

    Article  Google Scholar 

  28. Wen, R. T., Niklasson, G. A. & Granqvist, C. G. Electrochromic nickel oxide films and their compatibility with potassium hydroxide and lithium perchlorate in propylene carbonate: optical, electrochemical and stress-related properties. Thin Solid Films 565, 128–135 (2014).

    Article  Google Scholar 

  29. Liu, Q. et al. Electrolytes-relevant cyclic durability of nickel oxide thin films as an ion-storage layer in an all-solid-state complementary electrochromic device. Sol. Energy Mat. Sol. C 157, 844–852 (2016).

    Article  Google Scholar 

  30. Mihelčič, M. et al. Comparison of electrochromic properties of Ni1−xO in lithium and lithium-free aprotic electrolytes: from Ni1−xO pigment coatings to flexible electrochromic devices. Sol. Energy Mat. Sol. C 120, 116–130 (2014).

    Article  Google Scholar 

  31. Guo, J. et al. Mechanistic insights into the coloration, evolution, and degradation of NiOx electrochromic anodes. Inorg. Chem. 57, 8874–8880 (2018).

    Article  Google Scholar 

  32. Xia, X. H. et al. Electrochromic properties of porous NiO thin films prepared by a chemical bath deposition. Sol. Energy Mat. Sol. C 92, 628–633 (2008).

    Article  Google Scholar 

  33. Granqvist, C. G. Electrochromic materials: out of a niche. Nat. Mater. 5, 89–90 (2006).

    Article  Google Scholar 

  34. Bergh, H. S. et al. Electrochromic multilayer devices with spatially coordinated switching. US patent US2016/0011481A1 (2016).

  35. Li, Y., Tse, E. C. M., Barile, C. J., Gewirth, A. A. & Zimmerman, S. C. Photoresponsive molecular switch for regulating transmembrane proton-transfer kinetics. J. Am. Chem. Soc. 137, 14059–14062 (2015).

    Article  Google Scholar 

  36. Kondalkar Vijay, V. et al. Electrochromic performance of nickel oxide thin film: synthesis via electrodeposition technique. Macromol. Symp. 361, 47–50 (2016).

    Article  Google Scholar 

  37. Özer, N. Optical properties and electrochromic characterization of sol–gel deposited ceria films. Sol. Energy Mat. Sol. C 68, 391–400 (2001).

    Article  Google Scholar 

Download references

Acknowledgements

This research was supported by Research and Innovation at the University of Nevada, Reno and also by the Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) under the Building Energy Efficiency Frontiers in Innovation Technologies Program, Award Number DE-EE0008266/001. T.S.H. acknowledges a National Science Foundation Graduate Research Fellowship (No. NSF DGE-1656518). We acknowledge the Shared Instrumentation Laboratory in the Department of Chemistry at the University of Nevada, Reno (UNR). SEM-EDS analysis was performed in the Mackay Microbeam Laboratory at UNR, and we thank J. Desormeau for his kind assistance. We appreciate R. Kazemi and Dr. Alpuche’s laboratory for assistance in profilometry measurements. We also acknowledge T. Hull for work with CeO2 films, initial large-scale work by J. Jaurez-Rolon, and L. Postak from Quanex for providing the Solargain edge tape. We are grateful for fruitful discussions with M. Strand. We appreciate W. Scheideler, a post-doctoral student in R. Dauskardt’s group at Stanford University, for help with preparing the NiO samples via spray pyrolysis.

Author information

Authors and Affiliations

  1. Department of Chemistry, University of Nevada, Reno, Reno, NV, USA

    Shakirul M. Islam & Christopher J. Barile

  2. Department of Chemistry, Stanford University, Stanford, CA, USA

    Tyler S. Hernandez

  3. Department of Chemical and Biological Engineering, University of Colorado, Boulder, CO, USA

    Tyler S. Hernandez & Michael D. McGehee

Authors
  1. Shakirul M. Islam
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Tyler S. Hernandez
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Michael D. McGehee
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Christopher J. Barile
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

All authors designed the experiments, discussed the results, and commented on the manuscript. S.M.I. and T.S.H. performed the experiments and analysed the data. M.D.M. and C.J.B. wrote the paper. C.J.B. conceived the project.

Corresponding author

Correspondence to Christopher J. Barile.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary Information

Supplementary Information

Supplementary Figures 1–16

Rights and permissions

Reprints and Permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Islam, S.M., Hernandez, T.S., McGehee, M.D. et al. Hybrid dynamic windows using reversible metal electrodeposition and ion insertion. Nat Energy 4, 223–229 (2019). https://doi.org/10.1038/s41560-019-0332-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41560-019-0332-3

This article is cited by

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing