Article | Published:

Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries

Nature Energyvolume 3pages600605 (2018) | Download Citation

Abstract

A critical challenge for the commercialization of layer-structured nickel-rich lithium transition metal oxide cathodes for battery applications is their capacity and voltage fading, which originate from the disintegration and lattice phase transition of the cathode particles. The general approach of cathode particle surface modification could partially alleviate the degradation associated with surface processes, but it still fails to resolve this critical barrier. Here, we report that infusing the grain boundaries of cathode secondary particles with a solid electrolyte dramatically enhances the capacity retention and voltage stability of the cathode. We find that the solid electrolyte infused in the boundaries not only acts as a fast channel for lithium-ion transport, it also, more importantly, prevents penetration of the liquid electrolyte into the boundaries, and consequently eliminates the detrimental factors, which include cathode–liquid electrolyte interfacial reactions, intergranular cracking and layered-to-spinel phase transformation. This grain-boundary engineering approach provides design ideas for advanced cathodes for batteries.

Access optionsAccess options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

All prices are NET prices.

Additional information

Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

References

  1. 1.

    Tarascon, J. M. & Armand, M. Issues and challenges facing rechargeable lithium batteries. Nature 414, 359–367 (2001).

  2. 2.

    Etacheri, V., Marom, R., Elazari, R., Salitra, G. & Aurbach, D. Challenges in the development of advanced Li-ion batteries: a review. Energy Environ. Sci. 4, 3243–3262 (2011).

  3. 3.

    Zhou, Y.-N. et al. Tuning charge–discharge induced unit cell breathing in layer-structured cathode materials for lithium-ion batteries. Nat. Commun. 5, 5381 (2014).

  4. 4.

    Lin, D., Liu, Y. & Cui, Y. Reviving the lithium metal anode for high-energy batteries. Nat. Nanotech. 12, 194–206 (2017).

  5. 5.

    Li, W., Song, B. & Manthiram, A. High-voltage positive electrode materials for lithium-ion batteries. Chem. Soc. Rev. 46, 3006–3059 (2017).

  6. 6.

    Liu, J. & Sun, X. Elegant design of electrode and electrode/electrolyte interface in lithium-ion batteries by atomic layer deposition. Nanotechnology 26, 024001 (2015).

  7. 7.

    Manthiram, A., Knight, J. C., Myung, S. T., Oh, S. M. & Sun, Y. K. Nickel-rich and lithium-rich layered oxide cathodes: progress and perspectives. Adv. Energy Mater. 6, 1501010 (2016).

  8. 8.

    Lee, E.-J. et al. Development of microstrain in aged lithium transition metal oxides. Nano Lett. 14, 4873–4880 (2014).

  9. 9.

    Liu, H. et al. Intergranular cracking as a major cause of long-term capacity fading of layered cathodes. Nano Lett. 17, 3452–3457 (2017).

  10. 10.

    Wang, Y. et al. Ti-substituted tunnel-type Na0.44MnO2 oxide as a negative electrode for aqueous sodium-ion batteries. Nat. Commun. 6, 6401 (2015).

  11. 11.

    Edström, K., Gustafsson, T. & Thomas, J. O. The cathode–electrolyte interface in the Li-ion battery. Electrochim. Acta 50, 397–403 (2004).

  12. 12.

    Cresce, A. V., Russell, S. M., Baker, D. R., Gaskell, K. J. & Xu, K. In situ and quantitative characterization of solid electrolyte interphases. Nano Lett. 14, 1405–1412 (2014).

  13. 13.

    Kim, H., Kim, M. G., Jeong, H. Y., Nam, H. & Cho, J. A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles. Nano Lett. 15, 2111–2119 (2015).

  14. 14.

    Luo, J., Cheng, H. K., Asl, K. M., Kiely, C. J. & Harmer, M. P. The role of a bilayer interfacial phase on liquid metal embrittlement. Science 333, 1730–1733 (2011).

  15. 15.

    Cho, J., Wang, C. M., Chan, H. M., Rickman, J. M. & Harmer, M. P. Role of segregating dopants on the improved creep resistance of aluminum oxide. Acta Mater. 47, 4197–4207 (1999).

  16. 16.

    Buban, J. P. et al. Grain boundary strengthening in alumina by rare earth impurities. Science 311, 212–215 (2006).

  17. 17.

    Shibata, N. et al. Observation of rare-earth segregation in silicon nitride ceramics at subnanometre dimensions. Nature 428, 730–733 (2004).

  18. 18.

    Appapillai, A. T., Mansour, A. N., Cho, J. & Shao-Horn, Y. Microstructure of LiCoO2 with and without 'AlPO4' nanoparticle coating: combined STEM and XPS studies. Chem. Mater. 19, 5748–5757 (2007).

  19. 19.

    Lee, Y. et al. Facile formation of a Li3PO4 coating layer during the synthesis of a lithium-rich layered oxide for high-capacity lithium-ion batteries. J. Power Sources 315, 284–293 (2016).

  20. 20.

    Sun, K. & Dillon, S. J. A mechanism for the improved rate capability of cathodes by lithium phosphate surficial films. Electrochem. Commun. 13, 200–202 (2011).

  21. 21.

    Li, X. et al. Atomic layer deposition of solid-state electrolyte coated cathode materials with superior high-voltage cycling behavior for lithium ion battery application. Energy Environ. Sci. 7, 768–778 (2014).

  22. 22.

    Miller, D. J., Proff, C., Wen, J. G., Abraham, D. P. & Bareño, J. Observation of microstructural evolution in Li battery cathode oxide particles by in situ electron microscopy. Adv. Energy Mater. 3, 1098–1103 (2013).

  23. 23.

    Bak, S.-M. et al. Structural changes and thermal stability of charged LiNixMnyCozO2 cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy. ACS Appl. Mater. Interfaces 6, 22594–22601 (2014).

  24. 24.

    Lim, J.-M. et al. Intrinsic origins of crack generation in Ni-rich LiNi0.8Co0.1Mn0.1O2 layered oxide cathode material. Sci. Rep. 7, 39669 (2017).

  25. 25.

    Wang, H., Jang, Y. I., Huang, B., Sadoway, D. R. & Chiang, Y. M. TEM study of electrochemical cycling‐induced damage and disorder in LiCoO2 cathodes for rechargeable lithium batteries. J. Electrochem. Soc. 146, 473–480 (1999).

  26. 26.

    Kim, J. et al. Controllable solid electrolyte interphase in nickel-rich cathodes by an electrochemical rearrangement for stable lithium-ion batteries. Adv. Mater. 30, 1704309 (2018).

  27. 27.

    Ryu, H.-H., Park, K.-J., Yoon, C. S. & Sun, Y.-K. Capacity fading of Ni-rich Li[NixCoyMn1–xy]O2 (0.6 ≤ x ≤ 0.95) cathodes for high-energy-density lithium-ion batteries: bulk or surface degradation? Chem. Mater. 30, 1155–1163 (2018).

  28. 28.

    Yan, P. et al. Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries. Nat. Commun. 8, 14101 (2017).

Download references

Acknowledgements

We thank R. Liu and Y. Yang from Xiamen University for the DSC test and M. Sui for support on the TEM analysis. This work is supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies of the US Department of Energy (DOE) under contract no. DE-AC02-05CH11231, subcontract no. 18769 and no. 6951379 under the Advanced Battery Materials Research program. The microscopic analysis in this work was conducted in the William R. Wiley Environmental Molecular Sciences Laboratory, a national scientific user facility sponsored by the DOE's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle for the DOE under contract DE-AC05-76RL01830. Solid-state electrolyte coating by ALD was conducted in the lab of X.S. and is financially supported by the Nature Sciences and Engineering Research Council of Canada Program, Canada Research Chair Program, Canada Foundation for Innovation and the University of Western Ontario. Part of ALD coating was done in BJUT (Y.Z.) under the support of National Natural Science Foundation of China (21676005). P.Y. thanks the National Natural Science Fund for Innovative Research Groups (grant no. 51621003) and the National Key Research and Development Program of China (grant no. 2016YFB0700700).

Author information

Author notes

  1. These authors contributed equally to this work: Pengfei Yan, Jianming Zheng.

Affiliations

  1. Environmental Molecular Sciences Laboratory, Pacific Northwest National Laboratory, Richland, WA, USA

    • Pengfei Yan
    •  & Chongmin Wang
  2. Institute of Microstructure and Properties of Advanced Materials, Beijing University of Technology, Beijing, China

    • Pengfei Yan
    • , Xiaopeng Cheng
    •  & Yuefei Zhang
  3. Energy and Environment Directorate, Pacific Northwest National Laboratory, Richland, WA, USA

    • Jianming Zheng
    •  & Ji-Guang Zhang
  4. Nanomaterials and Energy Lab, Department of Mechanical and Materials Engineering, University of Western Ontario, London, Ontario, Canada

    • Jian Liu
    • , Biqiong Wang
    •  & Xueliang Sun

Authors

  1. Search for Pengfei Yan in:

  2. Search for Jianming Zheng in:

  3. Search for Jian Liu in:

  4. Search for Biqiong Wang in:

  5. Search for Xiaopeng Cheng in:

  6. Search for Yuefei Zhang in:

  7. Search for Xueliang Sun in:

  8. Search for Chongmin Wang in:

  9. Search for Ji-Guang Zhang in:

Contributions

C.W., J.Z. and J.-G.Z. initiated this research project. J.Z. and J.L. synthesized the cathode materials. J.L., B.W., X.C., Y.Z. and X.S. carried out the ALD coating. J.Z. and X.C. performed battery tests. P.Y. conducted the TEM and SEM analyses. P.Y., J.Z., C.W. and J.-G.Z. prepared the manuscript with the input from all the other co-authors.

Competing interests

The authors declare no competing interests.

Corresponding authors

Correspondence to Xueliang Sun or Chongmin Wang or Ji-Guang Zhang.

Supplementary information

  1. Supplementary Information

    Supplementary Figures 1–16

About this article

Publication history

Received

Accepted

Published

DOI

https://doi.org/10.1038/s41560-018-0191-3