Production technology for automotive lithium-ion battery (LIB) cells and packs has improved considerably in the past five years. However, the transfer of developments in materials, cell design and processes from lab scale to production scale remains a challenge due to the large number of consecutive process steps and the significant impact of material properties, electrode compositions and cell designs on processes. This requires an in-depth understanding of the individual production processes and their interactions, and pilot-scale investigations into process parameter selection and prototype cell production. Furthermore, emerging process concepts must be developed at lab and pilot scale that reduce production costs and improve cell performance. Here, we present an introductory summary of the state-of-the-art production technologies for automotive LIBs. We then discuss the key relationships between process, quality and performance, as well as explore the impact of materials and processes on scale and cost. Finally, future developments and innovations that aim to overcome the main challenges are presented.
Your institute does not have access to this article
Open Access articles citing this article.
Self-ball milling strategy to construct high-entropy oxide coated LiNi0.8Co0.1Mn0.1O2 with enhanced electrochemical performance
Journal of Advanced Ceramics Open Access 11 May 2022
Effect of coating operating parameters on electrode physical characteristics and final electrochemical performance of lithium-ion batteries
International Journal of Energy and Environmental Engineering Open Access 04 March 2022
Sample-efficient parameter exploration of the powder film drying process using experiment-based Bayesian optimization
Scientific Reports Open Access 08 February 2022
Subscribe to Journal
Get full journal access for 1 year
only $8.25 per issue
All prices are NET prices.
VAT will be added later in the checkout.
Tax calculation will be finalised during checkout.
Get time limited or full article access on ReadCube.
All prices are NET prices.
Yoshio, M., Brodd, R. J. & Kozawa, A. Lithium-Ion Batteries – Science and Technologies (Springer, New York, 2009).
Pistoia, G. Lithium-Ion Batteries – Advances and Application. (Elsevier, Amsterdam, 2014).
Väyrynen, A. & Salminen, J. Lithium ion battery production. J. Chem. Thermodyn. 46, 80–85 (2012).
Gallagher, K. G. et al. Optimizing areal capacities through understanding the limitations of lithium-ion electrodes. J. Electrochem. Soc. 163, A138–A149 (2016). Influence of calendering process and resulting porosity on achievable energy and power density is studied.
Haselrieder, W. et al. Measuring the coating adhesion strength of electrodes for lithium-ion batteries. Int. J. Adhes. Adhes. 60, 1–8 (2015).
Zhang, S. S. A review on the separators of liquid electrolyte Li-ion batteries. J. Power Sources 164, 351–364 (2007).
Kim, K. M., Jeon, W. S., Chung, I. J. & Chang, S. H. Effect of mixing sequences on the electrode characteristics of lithium-ion rechargeable batteries. J. Power Sources 83, 108–113 (1999).
Haselrieder, W. et al. Influence of formulation method and related processes on structural, electrical and electrochemical properties of LMS/NCA-blend electrodes. Prog. Solid State Chem. 42, 157–174 (2014).
Liu, Z., Battaglia, V. & Mukherjee, P. P. Mesoscale elucidation of the influence of mixing sequence in electrode processing. Langmuir 30, 15102–15113 (2014).
Bockholt, H., Indrikova, M., Netz, A., Golks, F. & Kwade, A. The interaction of consecutive process steps in the manufacturing of lithium-ion battery electrodes with regard to structural and electrochemical properties. J. Power Sources 325, 140–151 (2016). Impact of mixing process and consecutive calendering on structure of carbon black (as conductivity agent) and resulting electrochemical performance is investigated.
Wenzel, V., Nirschl, H. & Nötzel, D. Challenges in lithium-ion-battery slurry preparation and potential of modifying electrode structures by different mixing processes. Energy Technol. 3, 692–698 (2015).
Bockholt, H. Formulation Strategies to Optimize Performance of Lithium-Ion Batteries. PhD thesis, Technische Universitaet Braunschweig (2016).
Liu, D. et al. An effective mixing for lithium ion battery slurries. Adv. Chem. Eng. Sci. 04, 515–528 (2014).
Haselrieder, W., Ivanov, S., Christen, D. K., Bockholt, H. & Kwade, A. Impact of the calendering process on the interfacial structure and the related electrochemical performance of secondary lithium-ion batteries. ECS Transactions 50, 59–70 (2013).
Dreger, H., Bockholt, H., Haselrieder, W. & Kwade, A. Discontinuous and continuous processing of low-solvent battery slurries for lithium nickel cobalt manganese oxide electrodes. J. Electron. Mater. 44, 4434–4443 (2015).
Terashita, K. & Miyanami, K. Kneading and dispersion of positive electrode materials in a lithium ion secondary battery for high-density film. Adv. Powder Technol. 13, 201–214 (2002).
Chen, L.-C. et al. Improvement of lithium-ion battery performance using a two-layered cathode by simultaneous slot-die coating. J. Energy Stor. 5, 156–162 (2016).
Schmitt, M., Scharfer, P. & Schabel, W. Slot die coating of lithium-ion battery electrodes: investigations on edge effect issues for stripe and pattern coatings. J. Coat. Technol. Res. 11, 57–63 (2013).
Liu, Z. & Mukherjee, P. P. Microstructure evolution in lithium-ion battery electrode processing. J. Electrochem. Soc. 161, E3248–E3258 (2014).
Westphal, B. G., Bockholt, H., Günther, T., Haselrieder, W. & Kwade, A. Influence of convective drying parameters on electrode performance and physical electrode properties. ECS Transactions 64, 57–68 (2015).
Jaiser, S., Friske, A., Baunach, M., Scharfer, P. & Schabel, W. Development of a three-stage drying profile based on characteristic drying stages for lithium-ion battery anodes. Dry. Technol. 35, 1266–1275 (2017).
Ahmed, S., Nelson, P. A., Gallagher, K. G. & Dees, D. W. Energy impact of cathode drying and solvent recovery during lithium-ion battery manufacturing. J. Power Sources 322, 169–178 (2016).
Meyer, C., Bockholt, H., Haselrieder, W. & Kwade, A. Characterization of the calendering process for compaction of electrodes for lithium-ion batteries. J. Mater. Process. Technol. 249, 172–178 (2017).
Zheng, H., Tan, L., Liu, G., Song, X. & Battaglia, V. S. Calendering effects on the physical and electrochemical properties of LiNi1/3Mn1/3Co1/3O2 cathode. J. Power Sources 208, 52–58 (2012).
Kang, H. et al. Geometric and electrochemical characteristics of LiNi1/3Mn1/3Co1/3O2 electrode with different calendering conditions. Electrochim. Acta 232, 431–438 (2017).
Schilling, A., Schmitt, J., Dietrich, F. & Droeder, K. Analyzing Bending stresses on lithium-ion battery cathodes induced by the assembly process. Energy Technol. 4, 1502–1508 (2016).
Lee, S. S., Kim, T. H., Hu, S. J., Cai, W. W. & Abell, J. A. Joining technologies for automotive lithium-ion battery manufacturing – A review. In Int. Manuf. Sci. Eng. Conf. 1, 541–549 (ASME, 2010).
Knoche, T. et al. In situ visualization of the electrolyte solvent filling process by neutron radiography. J. Power Sources 331, 267–276 (2016). Neutron radiography is identified as a valuable method for in situ studies of the electrolyte filling and wetting process.
Knoche, T., Surek, F. & Reinhart, G. A process model for the electrolyte filling of lithium-ion batteries. Proc. CIRP 41, 405–410 (2016).
An, S. J., Li, J., Du, Z., Daniel, C. & Wood, D. L. Fast formation cycling for lithium ion batteries. J. Power Sources 342, 846–852 (2017). A formation protocol is presented that allows the formation time can be significantly shortened without affecting the cell performance, which results in considerable savings potential in cell manufacturing.
Li, S., Wang, H., Lin, Y.-T., Abell, J. & Hu, S. J. Benchmarking of high capacity battery module/pack design for automatic assembly system. In Int. Manuf. Sci. Eng. Conf. 1–13 (ASME, 2010).
Saw, L. H., Ye, Y. & Tay, A. A. O. Integration issues of lithium-ion battery into electric vehicles battery pack. J. Clean. Prod. 113, 1032–1045 (2016).
Arora, S., Shen, W. & Kapoor, A. Review of mechanical design and strategic placement technique of a robust battery pack for electric vehicles. Renew. Sust. Energ. Rev. 60, 1319–1331 (2016).
Günther, T. et al. The manufacturing of electrodes: key process for the future success of lithium-ion batteries. Adv. Mat. Res. 1140, 304–311 (2016).
Bauer, W., Nötzel, D., Wenzel, V. & Nirschl, H. Influence of dry mixing and distribution of conductive additives in cathodes for lithium ion batteries. J. Power Sources 288, 359–367 (2015).
Patey, T. J., Hintennach, A., La Mantia, F. & Novák, P. Electrode engineering of nanoparticles for lithium-ion batteries—Role of dispersion technique. J. Power Sources 189, 590–593 (2009).
Pejovnik, S., Dominko, R., Bele, M., Gaberscek, M. & Jamnik, J. Electrochemical binding and wiring in battery materials. J. Power Sources 184, 593–597 (2008).
Cho, K. Y., Kwon, Y. I., Youn, J. R. & Song, Y. S. Evaluation of slurry characteristics for rechargeable lithium-ion batteries. Mater. Res. Bull. 48, 2922–2926 (2013).
Bockholt, H., Haselrieder, W. & Kwade, A. Intensive powder mixing for dry dispersing of carbon black and its relevance for lithium-ion battery cathodes. Powder Technol. 297, 266–274 (2016).
Nakajima, H., Kitahara, T., Higashinaka, Y. & Nagata, Y. Effect of electrode mixing conditions on the performance of lithium-ion batteries analyzed by fast Fourier transform electrochemical impedance spectroscopy. ECS Transactions 64, 87–95 (2015).
Bitsch, B. et al. A novel slurry concept for the fabrication of lithium-ion battery electrodes with beneficial properties. J. Power Sources 265, 81–90 (2014).
Jaiser, S., Sanchez Salach, N., Baunach, M., Scharfer, P. & Schabel, W. Impact of drying conditions and wet film properties on adhesion and film solidification of lithium-ion battery anodes. Dry. Technol. 35, 1807–1817 (2017).
Hagiwara, H., Suszynski, W. J. & Francis, L. F. A Raman spectroscopic method to find binder distribution in electrodes during drying. J. Coat. Technol. Res. 11, 11–17 (2014).
Jaiser, S. et al. Investigation of film solidification and binder migration during drying of Li-Ion battery anodes. J. Power Sources 318, 210–219 (2016). Physical processes during drying of electrodes cause migration of binders, which can be minimized by appropriate drying profiles.
Tran, H. Y. et al. Influence of electrode preparation on the electrochemical performance of LiNi0.8Co0.15Al0.05O2 composite electrodes for lithium-ion batteries. J. Power Sources 210, 276–285 (2012).
Schilcher, C., Meyer, C. & Kwade, A. Structural and electrochemical properties of calendered LMO cathodes. Energy Technol. 4, 1–8 (2016).
Park, Y. S., Oh, E. S. & Lee, S. M. Effect of polymeric binder type on the thermal stability and tolerance to roll-pressing of spherical natural graphite anodes for Li-ion batteries. J. Power Sources 248, 1191–1196 (2014).
Chen, Y.-H., Wang, C.-W., Zhang, X. & Sastry, A. M. Porous cathode optimization for lithium cells: Ionic and electronic conductivity, capacity, and selection of materials. J. Power Sources 195, 2851–2863 (2010).
Tang, M., Albertus, P. & Newman, J. Two-dimensional modeling of lithium deposition during cell charging. J. Electrochem. Soc. 156, A390–A399 (2009).
Pfleging, W. & Pröll, J. A new approach for rapid electrolyte wetting in tape cast electrodes for lithium-ion batteries. J. Mater. Chem. A 2, 14918–14926 (2014). A laser structuring method is presented for the cathode to accelerate electrolyte wetting, to increase cell lifetime and to increase the capacity.
Xie, Y. et al. Enhancement on the wettability of lithium battery separator toward nonaqueous electrolytes. J. Membrane Sci. 503, 25–30 (2016).
Juang, R. S., Liang, C. H., Ma, W. C., Tsai, C. Y. & Huang, C. Low-pressure ethane/nitrogen gas mixture plasma surface modification effect on the wetting and electrochemical performance of polymeric separator for lithium-ion batteries. J. Taiwan Inst. Chem. E 45, 3046–3051 (2014).
Knoche, T. & Reinhart, G. Electrolyte Filling of Large-Scale Lithium-Ion Batteries: Challenges for Production Technology and Possible Approaches. Appl. Mech. Mater. 794, 11–18 (2015).
Ahmed, S., Nelson, P. A. & Dees, D. W. Study of a dry room in a battery manufacturing plant using a process model. J. Power Sources 326, 490–497 (2016).
Trask, S. E. et al. From coin cells to 400 mAh pouch cells: Enhancing performance of high-capacity lithium-ion cells via modifications in electrode constitution and fabrication. J. Power Sources 259, 233–244 (2014).
Karulkar, M., Wen, H., Kudla, B. & Blaser, R. Evaluation of Si-Based Cells and the Importance of Scale-up. ECS Transactions 72, 197–206 (2016).
Du, Z. et al. Enabling aqueous processing for crack-free thick electrodes. J. Power Sources 354, 200–206 (2017).
Nelson, P. A., Shabbir, A., Gallagher, K. G. & Dees, D. W. Cost savings for manufacturing lithium batteries in a flexible plant. J. Power Sources 283, 506–516 (2015).
Wood, D. L., Li, J. & Daniel, C. Prospects for reducing the processing cost of lithium ion batteries. J. Power Sources 275, 234–242 (2015).
Patry, G., Romagny, A., Martinet, S. & Froehlich, D. Cost modeling of lithium-ion battery cells for automotive applications. Energy Sci. Eng. 3, 71–82 (2015).
Schuenemann, J. -H. Cost Model to Validate Production Cost of Lithium-Ion Batteries. PhD thesis, Technische Universitaet Braunschweig (2015).
Schuenemann, J.-H., Dreger, H., Bockholt, H. & Kwade, A. Smart electrode processing for battery cost reduction. ECS Transactions 73, 153–159 (2016).
Peelamedu, R. D. & Seccombe, D. A. Jr. Performance study of Li-ion battery electrodes dried using inline microwave hybrid system. Ceram. Eng. Sci. Proc. 36, 101–115 (2016).
Bhattacharya, M. & Basak, T. A review on the susceptor assisted microwave processing of materials. Energy 97, 306–338 (2016).
Al-Shroofy, M. et al. Solvent-free dry powder coating process for low-cost manufacturing of LiNi1/3Mn1/3Co1/3O2 cathodes in lithium-ion batteries. J. Power Sources 352, 187–193 (2017).
Ludwig, B., Zheng, Z., Shou, W., Wang, Y. & Pan, H. Solvent-free manufacturing of electrodes for lithium-ion batteries. Sci. Rep. 6, 23150 (2016).
Chiang, Y. M. et al. Semi-solid filled battery and method of manufacture. Patent WO2012088442 A3 (2014).
Hopkins, B. J., Smith, K. C., Slocum, A. H. & Chiang, Y.-M. Component-cost and performance based comparison of flow and static batteries. J. Power Sources 293, 1032–1038 (2015).
Choi, J. W. & Aurbach, D. Promise and reality of post-lithium-ion batteries with high energy densities. Nat. Rev. Mater. 1, 16013 (2016). This review provides a detailed and critical overview of battery materials and systems that, according to today’s perspective, have the potential to replace lithium-ion batteries.
Chen, T., Wu, J., Zhang, Q. & Su, X. Recent advancement of SiOx based anodes for lithium-ion batteries. J. Power Sources 363, 126–144 (2017).
Wood, V. & Ebner, M. O. J. Method for the production of electrodes and electrodes made using such a method. Patent WO 2014170024 A1 (2014).
Ebner, M., Chung, D.-W., García, R. E. & Wood, V. Tortuosity anisotropy in Lithium-ion battery electrodes. Adv. Energy Mater. 4, 1–6 (2014).
Aydemir, M., Glodde, A., Mooy, R. & Bach, G. Increasing productivity in assembling z-folded electrode-separator-composites for lithium-ion batteries. CIRP Ann.-Manuf. Technol. 66, 25–28 (2017).
Kim, Y. J., Lee, H. S., Kim, G. S. & Woo, J. M. Manufacturing method of stacked electrodes by winding type electrode stacking and stacked electrode thereby. US patent US20100319187 A1 (2010).
Baumeister, M. & Fleischer, J. Integrated cut and place module for high productive manufacturing of lithium-ion cells. CIRP Ann.-Manuf. Technol. 63, 5–8 (2014).
Haselrieder, W. Systematical Adjustment of Battery Electrode Performance by Calendering. PhD thesis, Technische Universitaet Braunschweig (2017).
Diekmann, J. et al. Ecological recycling of lithium-ion batteries from electric vehicles with focus on mechanical processes. J. Electrochem. Soc. 164, A6184–A6191 (2017).
Schmitt, J. Studies on the Electrode-Separator Assembly Production Process for Lithium-ion Batteries. PhD thesis, Technische Universitaet Braunschweig (2015).
Chiang, Y. M., Duduta, M., Holman, R., Limthongkul, P. & Tan, T. Semi-solid electrodes having high rate capability. Patent WO/2014/093876 (2015).
We thank production experts of cell manufacturers including LG Chem (Korea), Litarion (Germany) and Saft (France) for their comments on the Review article.
The authors declare no competing interests.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Kwade, A., Haselrieder, W., Leithoff, R. et al. Current status and challenges for automotive battery production technologies. Nat Energy 3, 290–300 (2018). https://doi.org/10.1038/s41560-018-0130-3
Nature Reviews Materials (2022)
Sample-efficient parameter exploration of the powder film drying process using experiment-based Bayesian optimization
Scientific Reports (2022)
Laser welding of current collector foil stacks in battery production–mechanical properties of joints welded with a green high-power disk laser
The International Journal of Advanced Manufacturing Technology (2022)
Journal of Sol-Gel Science and Technology (2022)
International Journal of Minerals, Metallurgy and Materials (2022)