Article

Fire-extinguishing organic electrolytes for safe batteries

Received:
Accepted:
Published online:

Abstract

Severe safety concerns are impeding the large-scale employment of lithium/sodium batteries. Conventional electrolytes are highly flammable and volatile, which may cause catastrophic fires or explosions. Efforts to introduce flame-retardant solvents into the electrolytes have generally resulted in compromised battery performance because those solvents do not suitably passivate carbonaceous anodes. Here we report a salt-concentrated electrolyte design to resolve this dilemma via the spontaneous formation of a robust inorganic passivation film on the anode. We demonstrate that a concentrated electrolyte using a salt and a popular flame-retardant solvent (trimethyl phosphate), without any additives or soft binders, allows stable charge–discharge cycling of both hard-carbon and graphite anodes for more than 1,000 cycles (over one year) with negligible degradation; this performance is comparable or superior to that of conventional flammable carbonate electrolytes. The unusual passivation character of the concentrated electrolyte coupled with its fire-extinguishing property contributes to developing safe and long-lasting batteries, unlocking the limit toward development of much higher energy-density batteries.

  • Subscribe to Nature Energy for full access:

    $59

    Subscribe

Additional access options:

Already a subscriber?  Log in  now or  Register  for online access.

References

  1. 1.

    Yoshida, K. et al. Oxidative-stability enhancement and charge transport mechanism in glyme-lithium salt equimolar complexes. J. Am. Chem. Soc. 133, 13121–13129 (2011).

  2. 2.

    Suo, L., Hu, Y.-S., Li, H., Armand, M. & Chen, L. A new class of Solvent-in-Salt electrolyte for high-energy rechargeable metallic lithium batteries. Nat. Commun. 4, 1481 (2013).

  3. 3.

    Yamada, Y. et al. Unusual stability of acetonitrile-based superconcentrated electrolytes for fast-charging lithium-ion batteries. J. Am. Chem. Soc. 136, 5039–5046 (2014).

  4. 4.

    Qian, J. et al. High rate and stable cycling of lithium metal anode. Nat. Commun. 6, 6362 (2015).

  5. 5.

    Suo, L. et al. ‘Water-in-salt’ electrolyte enables high-voltage aqueous lithium-ion chemistries. Science 350, 938–943 (2015).

  6. 6.

    Wang, J. et al. Superconcentrated electrolytes for a high-voltage lithium-ion battery. Nat. Commun. 7, 12032 (2016).

  7. 7.

    Yamada, Y. et al. Hydrate-melt electrolytes for high-energy-density aqueous batteries. Nat. Energy 1, 16129 (2016).

  8. 8.

    Xu, K. Nonaqueous liquid electrolytes for lithium-based rechargeable batteries. Chem. Rev. 104, 4303–4418 (2004).

  9. 9.

    Roth, E. P. & Orendorff, C. J. How electrolytes influence battery safety. Electrochem. Soc. Interface 21, 45–49 (2012).

  10. 10.

    Choi, N.-S. S. et al. Challenges facing lithium batteries and electrical double-layer capacitors. Angew. Chem. Int. Ed. 51, 9994–10024 (2012).

  11. 11.

    Kalhoff, J., Eshetu, G. G., Bresser, D. & Passerini, S. Safer electrolytes for lithium-ion batteries: state of the art and perspectives. ChemSusChem 8, 2154–2175 (2015).

  12. 12.

    Wang, Q. et al. Thermal runaway caused fire and explosion of lithium ion battery. J. Power Sources 208, 210–224 (2012).

  13. 13.

    Finegan, D. P. et al. In-operando high-speed tomography of lithium-ion batteries during thermal runaway. Nat. Commun. 6, 6924 (2015).

  14. 14.

    Liu, K. et al. Electrospun core-shell microfiber separator with thermal-triggered flame-retardant properties for lithium-ion batteries. Sci. Adv. 3, e1601978 (2017).

  15. 15.

    Chen, Z. et al. Fast and reversible thermoresponsive polymer switching materials for safer batteries. Nat. Energy 1, 15009 (2016).

  16. 16.

    Sun, Y.-K. et al. Nanostructured high-energy cathode materials for advanced lithium batteries. Nat. Mater. 11, 942–947 (2012).

  17. 17.

    Lu, L., Han, X., Li, J., Hua, J. & Ouyang, M. A review on the key issues for lithium-ion battery management in electric vehicles. J. Power Sources 226, 272–288 (2013).

  18. 18.

    Ribière, P. et al. Investigation on the fire-induced hazards of Li-ion battery cells by fire calorimetry. Energy Environ. Sci. 5, 5271–5280 (2012).

  19. 19.

    Liu, X., Stoliarov, S. I., Denlinger, M., Masias, A. & Snyder, K. Comprehensive calorimetry of the thermally-induced failure of a lithium ion battery. J. Power Sources 280, 516–525 (2015).

  20. 20.

    Ping, P. et al. Study of the fire behavior of high-energy lithium-ion batteries with full-scale burning test. J. Power Sources 285, 80–89 (2015).

  21. 21.

    Wang, X., Yasukawa, E. & Kasuya, S. Nonflammable trimethyl phosphate solvent-containing electrolytes for lithium-ion batteries: I. Fundamental properties. J. Electrochem. Soc. 148, A1058–A1065 (2001).

  22. 22.

    Shim, E. G., Nam, T. H., Kim, J. G., Kim, H. S. & Moon, S. I. Effect of the concentration of diphenyloctyl phosphate as a flame-retarding additive on the electrochemical performance of lithium-ion batteries. Electrochim. Acta 54, 2276–2283 (2009).

  23. 23.

    Nakagawa, H. et al. Electrochemical Raman study of edge plane graphite negative-electrodes in electrolytes containing trialkyl phosphoric ester. J. Power Sources 212, 148–153 (2012).

  24. 24.

    Feng, J. et al. Ether-based nonflammable electrolyte for room temperature sodium battery. J. Power Sources 284, 222–226 (2015).

  25. 25.

    Xu, K., Ding, M. S., Zhang, S., Allen, J. L. & Jow, T. R. An attempt to formulate nonflammable lithium ion electrolytes with alkyl phosphates and phosphazenes. J. Electrochem. Soc. 149, A622–A626 (2002).

  26. 26.

    Xu, K., Ding, M. S., Zhang, S., Allen, J. L. & Jow, T. R. Evaluation of fluorinated alkyl phosphates as flame retardants in electrolytes for Li-ion batteries: I. Physical and electrochemical properties. J. Electrochem. Soc. 150, A161–A169 (2003).

  27. 27.

    Ota, H., Kominato, A., Chun, W.-J., Yasukawa, E. & Kasuya, S. Effect of cyclic phosphate additive in non-flammable electrolyte. J. Power Sources 119–121, 393–398 (2003).

  28. 28.

    Matsumoto, K. et al. Performance improvement of Li ion battery with non-flammable TMP mixed electrolyte by optimization of lithium salt concentration and SEI preformation technique on graphite anode. J. Electrochem. Soc. 161, A831–A834 (2014).

  29. 29.

    Murmann, P. et al. Influence of the fluorination degree of organophosphates on flammability and electrochemical performance in lithium ion batteries: studies on fluorinated compounds deriving from triethyl phosphate. J. Electrochem. Soc. 163, A751–A757 (2016).

  30. 30.

    Wang, X., Yamada, C., Naito, H., Segami, G. & Kibe, K. High-concentration trimethyl phosphate-based nonflammable electrolytes with improved charge-discharge performance of a graphite anode for lithium-ion cells. J. Electrochem. Soc. 153, A135–A139 (2006).

  31. 31.

    Hess, S., Wohlfahrt-Mehrens, M. & Wachtler, M. Flammability of Li-ion battery electrolytes: flash point and self-extinguishing time measurements. J. Electrochem. Soc. 162, A3084–A3097 (2015).

  32. 32.

    Zeng, Z. et al. A safer sodium-ion battery based on nonflammable organic phosphate electrolyte. Adv. Sci. 3, 1600066 (2016).

  33. 33.

    Xu, K. Electrolytes and interphases in Li-ion batteries and beyond. Chem. Rev. 114, 11503–11618 (2014).

  34. 34.

    Han, F., Zhu, Y., He, X., Mo, Y. & Wang, C. Electrochemical stability of Li10GeP2S12 and Li7La3Zr2O12 solid electrolytes. Adv. Energy Mater. 6, 1501590 (2016).

  35. 35.

    Janek, J. & Zeier, W. G. A solid future for battery development. Nat. Energy 1, 16141 (2016).

  36. 36.

    Mogensen, R., Brandell, D. & Younesi, R. Solubility of the solid electrolyte interphase (SEI) in sodium ion batteries. ACS Energy Lett. 1, 1173–1178 (2016).

  37. 37.

    Peled, E. Advanced model for solid electrolyte interphase electrodes in liquid and polymer electrolytes. J. Electrochem. Soc. 144, L208–L210 (1997).

  38. 38.

    Aurbach, D. Review of selected electrode–solution interactions which determine the performance of Li and Li ion batteries. J. Power Sources 89, 206–218 (2000).

  39. 39.

    Edström, K., Herstedt, M. & Abraham, D. P. A new look at the solid electrolyte interphase on graphite anodes in Li-ion batteries. J. Power Sources 153, 380–384 (2006).

  40. 40.

    Verma, P., Maire, P. & Novák, P. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries. Electrochim. Acta 55, 6332–6341 (2010).

  41. 41.

    Gauthier, M. et al. Electrode–electrolyte interface in Li-ion batteries: current understanding and new insights. J. Phys. Chem. Lett. 6, 4653–4672 (2015).

  42. 42.

    Hammami, A., Raymond, N. & Armand, M. Lithium-ion batteries: Runaway risk of forming toxic compounds. Nature 424, 635–636 (2003).

  43. 43.

    Komaba, S. et al. Electrochemical Na insertion and solid electrolyte interphase for hard-carbon electrodes and application to Na-ion batteries. Adv. Funct. Mater. 21, 3859–3867 (2011).

  44. 44.

    Komaba, S. et al. Fluorinated ethylene carbonate as electrolyte additive for rechargeable Na batteries. ACS Appl. Mater. Interfaces 3, 4165–4168 (2011).

  45. 45.

    Ponrouch, A., Marchante, E., Courty, M., Tarascon, J.-M. & Palacín, M. R. In search of an optimized electrolyte for Na-ion batteries. Energy Environ. Sci. 5, 8572–8583 (2012).

  46. 46.

    Eshetu, G. G. et al. Comprehensive insights into the reactivity of electrolytes based on sodium ions. ChemSusChem 9, 462–471 (2016).

  47. 47.

    CPMD (IBM Corp/Max-Planck Institut für Feskörperforschung Stuttgart, 1990–2015); http://www.cpmd.org

  48. 48.

    Goedecker, S., Teter, M. & Hutter, J. Separable dual-space Gaussian pseudopotentials. Phys. Rev. B 54, 1703–1710 (1996).

Download references

Acknowledgements

This work was supported by the Elements Strategy Initiative for Catalysts & Batteries (ESICB) of the Ministry of Education, Culture, Sports, Science and Technology (MEXT) and JSPS KAKENHI Grant-in-Aid for Specially Promoted Research (Grant Number JP15H05701). This work was partially supported by Nippon Shokubai Co. and the ‘Priority Issue (No. 5) on Post K computer’ project of MEXT. The calculations were performed at the super-computers of the National Institute for Materials Science and The University of Tokyo as well as the K computer at RIKEN, partly through the HPCI System Projects (Project ID: hp160075, hp160174, hp160225, hp160080). J.W. is grateful to the Japan Society for the Promotion of Sciences for a JSPS Fellowship at The University of Tokyo (no. 16F16051). Y.Y. is grateful to JSPS Grant-in-Aid for Young Scientists (A) (no. 26708030). The authors are deeply grateful to R. Hagiwara, T. Nohira and K. Matsumoto (Kyoto University) for the fruitful discussion on the electrolyte design. The authors acknowledge J. Ma for synthesizing the Na3V2(PO4)3 material, S.-i. Nishimura and S.-C. Chung for their valuable suggestions on both the SEI identification and the manuscript, and L. Lander for the Rietveld refinement work.

Author information

Affiliations

  1. Department of Chemical System Engineering, The University of Tokyo, Bunkyo-ku, Tokyo, 113-8656, Japan

    • Jianhui Wang
    • , Yuki Yamada
    • , Eriko Watanabe
    • , Koji Takada
    •  & Atsuo Yamada
  2. Elements Strategy Initiative for Catalysts & Batteries (ESICB), Kyoto University, Nishikyo-ku, Kyoto, 615-8245, Japan

    • Yuki Yamada
    • , Keitaro Sodeyama
    • , Yoshitaka Tateyama
    •  & Atsuo Yamada
  3. Center for Green Research on Energy and Environmental Materials (GREEN) and Research and Services Division of Materials Data and Integrated System (MaDIS), National Institute for Materials Science (NIMS), Tsukuba, Ibaraki, 305-0044, Japan

    • Keitaro Sodeyama
    •  & Yoshitaka Tateyama
  4. PRESTO, Japan Science and Technology Agency (JST), Kawaguchi, Saitama, 333-0012, Japan

    • Keitaro Sodeyama

Authors

  1. Search for Jianhui Wang in:

  2. Search for Yuki Yamada in:

  3. Search for Keitaro Sodeyama in:

  4. Search for Eriko Watanabe in:

  5. Search for Koji Takada in:

  6. Search for Yoshitaka Tateyama in:

  7. Search for Atsuo Yamada in:

Contributions

A.Y. conceived and directed the project. Y.Y. and J.W. proposed the concept and designed the experiments. J.W. and K.T. performed the experiments and analysed the data. K.S., E.W. and Y.T. designed and conducted the theoretical calculations. All authors contributed to the discussion. J.W., Y.Y. and A.Y. wrote the manuscript.

Competing interests

The authors declare no competing financial interests.

Corresponding author

Correspondence to Atsuo Yamada.

Electronic supplementary material

  1. Supplementary Figures, Tables and References

    Supplementary Figures 1–18, Supplementary Tables 1–2 and Supplementary References

  2. Supplementary Video 1

    Flame test of the electrolyte vapour of 1.0 M LiPF6/DMC:TMP (1:1 by volume)

  3. Supplementary Video 2

    Flame test of the electrolyte vapour of 3.3 M NaFSA/TMP

  4. Supplementary Video 3

    Flame-test comparison between 1.0 M NaPF6/EC:DEC (1:1 by volume) and 3.3 M NaFSA/TMP