Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Climate and health damages from global concrete production

Nature Climate Change volume 10, pages 439–443 (2020)Cite this article

Subjects

Abstract

Growing infrastructure needs worldwide have created an unprecedented demand for concrete. Its production results in high GHG emissions, the primary focus of research and mitigation strategies in the sector. However, emissions of air pollutants and the economic burden of resultant health consequences are not yet known. Here, we show worldwide concrete production contributes approximately 7.8% of nitrogen oxide emissions, 4.8% of sulfur oxide emissions, 5.2% of particulate matter emissions smaller than 10 microns and 6.4% of particulate emissions smaller than 2.5 microns. Economic valuation of the damages from these and GHG emissions total ~75% of the cement and concrete industry current value. Commonly discussed GHG emissions mitigation strategies can halve these costs but, under certain scenarios, may increase local air pollution and associated health damages. These findings highlight potential synergies and trade-offs between GHG mitigation and improvements in local air quality, with implications for the political feasibility of different mitigation options.

This is a preview of subscription content

Access options

Rent or Buy article

Get time limited or full article access on ReadCube.

from$8.99

Rent or Buy

All prices are NET prices.

Fig. 1: Contributions to GHG emissions and DALYs.
Fig. 2: External costs of concrete.
Fig. 3: Effects of GHG mitigation strategies on economic climate and health damages.

Data availability

The data compiled and used to perform this work, as well as data used to produce the figures, can be found in the Supplementary Information. Raw data inputs may be procured through the referenced literature. Source data for Figs. 1–3 are included with the paper.

Code availability

Code to reproduce the figures in the manuscript is available at https://github.com/sabbiemiller/Concrete-air-2020.

References

  1. 1.

    Monteiro, P. J. M., Miller, S. A. & Horvath, A. Towards sustainable concrete. Nat. Mater. 16, 698–699 (2017).

    CAS  Article  Google Scholar 

  2. 2.

    World Population Prospects: The 2015 Revision: Key Findings and Advance Tables (UNPD, 2015).

  3. 3.

    Miller, S. A., Horvath, A. & Monteiro, P. J. M. Readily implementable techniques can cut annual CO2 emissions from the production of concrete by over 20%. Environ. Res. Lett. 11, 074029 (2016).

    Article  Google Scholar 

  4. 4.

    Davis, S. J. et al. Net-zero emissions energy systems. Science 360, eaas9793 (2018).

    Article  Google Scholar 

  5. 5.

    Lelieveld, J., Evans, J. S., Fnais, M., Giannadaki, D. & Pozzer, A. The contribution of outdoor air pollution sources to premature mortality on a global scale. Nature 525, 367–371 (2015).

    CAS  Article  Google Scholar 

  6. 6.

    Oberschelp, C., Pfister, S., Raptis, C. E. & Hellweg, S. Global emission hotspots of coal power generation. Nat. Sustain. 2, 113–121 (2019).

    Article  Google Scholar 

  7. 7.

    Haines, A. et al. Public health benefits of strategies to reduce greenhouse-gas emissions: overview and implications for policy makers. Lancet 374, 2104–2114 (2009).

    Article  Google Scholar 

  8. 8.

    Cifuentes, L., Borja-Aburto, V. H., Gouveia, N., Thurston, G. & Davis, D. L. Hidden health benefits of greenhouse gas mitigation. Science 293, 1257–1259 (2001).

    CAS  Article  Google Scholar 

  9. 9.

    Birshan, M., Czigler, T., Periwal, S. & Schulze, P. The cement industry at a turning point: A path toward value creation. McKinsey & Company Our Insights https://www.mckinsey.com/industries/chemicals/our-insights/the-cement-industry-at-a-turning-point-a-path-toward-value-creation (2015).

  10. 10.

    Kelly, T. D. & van Oss, H. G. Historical Statistics for Mineral and Material Commodities: Cement Statistics (USGS, 2014).

  11. 11.

    Coady, D., Parry, I. W. H., Sears, L. & Shang, B. How Large Are Global Energy Subsidies? Working Paper No. 15/105 (IMF, 2015).

  12. 12.

    BP Energy Outlook 2019 Edition (BP Energy Economics, 2019).

  13. 13.

    Humbert, S. et al. Intake fraction for particulate matter: recommendations for life cycle impact assessment. Environ. Sci. Technol. 45, 4808–4816 (2011).

    CAS  Article  Google Scholar 

  14. 14.

    Gronlund, C. J., Humbert, S., Shaked, S., O’Neill, M. S. & Jolliet, O. Characterizing the burden of disease of particulate matter for life cycle impact assessment. Air Qual. Atmos. Health 8, 29–46 (2015).

    CAS  Article  Google Scholar 

  15. 15.

    Miller, S. A., John, V. M., Pacca, S. A. & Horvath, A. Carbon dioxide reduction potential in the global cement industry by 2050. Cem. Concr. Res. 114, 115–124 (2018).

    CAS  Article  Google Scholar 

  16. 16.

    Xi, F. et al. Substantial global carbon uptake by cement carbonation. Nat. Geosci. 9, 880–883 (2016).

    CAS  Article  Google Scholar 

  17. 17.

    Technology Roadmap: Low-Carbon Transition in the Cement Industry (IEA, 2018).

  18. 18.

    Hills, T., Leeson, D., Florin, N. & Fennell, P. Carbon capture in the cement industry: technologies, progress, and retrofitting. Environ. Sci. Technol. 50, 368–377 (2016).

    CAS  Article  Google Scholar 

  19. 19.

    Gomez, D. R. et al. in 2006 IPCC Guidelines for National Greenhouse Gas Inventories Vol 2 (eds Eggleston, S. et al.) Ch. 2 (IPCC, 2007).

  20. 20.

    Feng, H. & Zou, B. Satellite-based estimation of the aerosol forcing contribution to the global land surface temperature in the recent decade. Remote Sens. Environ. 232, 111299 (2019).

    Article  Google Scholar 

  21. 21.

    Myhre, G. et al. in Climate Change 2013: The Physical Science Basis (eds Stocker, T. F. et al.) Ch. 8 (IPCC, 2013).

  22. 22.

    van Oss, H. G. 2012 Minerals Yearbook: Cement (USGS, 2015).

  23. 23.

    UN Comtrade Database: Cement (Portland, Aluminous, Slag or Hydraulic) (UN Comtrade, 2015).

  24. 24.

    Ready-Mixed Concrete Industry Statistics Year 2013 (ERMCO, 2014).

  25. 25.

    Global Cement Database on CO 2 and Energy Information (GNR, 2014).

  26. 26.

    Miller, S. A., Horvath, A. & Monteiro, P. J. M. Impacts of booming concrete production on water resources worldwide. Nat. Sustain. 1, 69–76 (2018).

    Article  Google Scholar 

  27. 27.

    AP 42 5th edn, Vol. I; Ch. 1 (USEPA, 1995).

  28. 28.

    Cai, H., Wang, M., Elgowainy, A. & Han, J. Updated Greenhouse Gas and Criteria Air Pollutant Emission Factors and Their Probability Distribution Functions for Electric Generating Units (USDOE OSTI, 2012).

  29. 29.

    Air Emissions Inventories, Vol. 2; Ch. 14 (USEPA, 2001).

  30. 30.

    Emission Factor Documentation for AP-42; Section 11.6 (USEPA, 1994).

  31. 31.

    AP 42 5th edn, Vol. I; Ch. 11 (USEPA, 2006).

  32. 32.

    Interagency Working Group on Social Cost of Greenhouse GasesTechnical Update of the Social Cost of Carbon for Regulatory Impact Analysis Under Executive Order 12866 Technical Support Document (EPA, 2016).

  33. 33.

    Lippiatt, B. BEES 4.0: Building for Environmental and Economic Sustainability Technical Manual and User Guide (NIST, 2007).

  34. 34.

    Carleton, T. et al. Valuing the Global Mortality Consequences of Climate Change Accounting for Adaptation Costs and Benefits Working Paper (Univ. Chicago, 2018).

Download references

Acknowledgements

S.A.M. thanks A. Horvath at the University of California Berkeley for editorial guidance at early stages of revision.

Author information

Affiliations

  1. Department of Civil and Environmental Engineering, University of California, Davis, CA, USA

    Sabbie A. Miller

  2. Department of Environmental Science and Policy, University of California, Davis, CA, USA

    Frances C. Moore

Authors
  1. Sabbie A. Miller
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Frances C. Moore
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

S.A.M. developed the methodological approach. S.A.M. and F.C.M. collected the data and evaluated the results. S.A.M. and F.C.M. wrote the manuscript.

Corresponding author

Correspondence to Sabbie A. Miller.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature Climate Change thanks Mehdi Akbarian, Shaohui Zhang and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary methods, Figs. 1–11 and references.

Reporting Summary

Supplementary Table

Supplementary Data sheets 1–9.

Source data

Source Data Fig. 1

Percent emissions data by source.

Source Data Fig. 2

Damages, fraction from health damage, and fraction from energy-based emissions.

Source Data Fig. 3

Mitigation effects data.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Miller, S.A., Moore, F.C. Climate and health damages from global concrete production. Nat. Clim. Chang. 10, 439–443 (2020). https://doi.org/10.1038/s41558-020-0733-0

Download citation

Further reading

Search

Advanced search

Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing