An air- and moisture-stable ruthenium precatalyst for diverse reactivity

Versatile, efficient and robust (pre)catalysts are pivotal in accelerating the discovery and optimization of chemical reactions, shaping diverse synthetic fields such as cross-coupling, C–H functionalization and polymer chemistry. Yet, their scarcity in certain domains has hindered the advancement and adoption of new applications. Here we present a highly reactive air- and moisture-stable ruthenium precatalyst [(tBuCN)5Ru(H2O)](BF4)2, featuring a key exchangeable water ligand. This versatile precatalyst drives an array of transformations, including late-stage C(sp2)–H arylation, primary/secondary alkylation, methylation, hydrogen/deuterium exchange, C(sp3)–H oxidation, alkene isomerization and oxidative cleavage, consistently outperforming conventionally used ruthenium (pre)catalysts. The generality and applicability of this precatalyst is exemplified through the potential for rapid screening and optimization of photocatalytic reactions with a suite of in situ generated ruthenium photocatalysts containing hitherto unknown complexes, and through the rapid discovery of reactivities previously unreported for ruthenium. The diverse applicability observed is suggestive of a generic platform for reaction simplification and accelerated synthetic discovery that will enable broader applicability and accessibility to state-of-the-art ruthenium catalysis.

Versatile, efficient and robust (pre)catalysts are pivotal in accelerating the discovery and optimization of chemical reactions, shaping diverse synthetic fields such as cross-coupling, C-H functionalization and polymer chemistry.Yet, their scarcity in certain domains has hindered the advancement and adoption of new applications.Here we present a highly reactive air-and moisture-stable ruthenium precatalyst [( t BuCN) 5 Ru(H 2 O)] (BF 4 ) 2 , featuring a key exchangeable water ligand.This versatile precatalyst drives an array of transformations, including late-stage C(sp 2 )-H arylation, primary/secondary alkylation, methylation, hydrogen/deuterium exchange, C(sp 3 )-H oxidation, alkene isomerization and oxidative cleavage, consistently outperforming conventionally used ruthenium (pre)catalysts.The generality and applicability of this precatalyst is exemplified through the potential for rapid screening and optimization of photocatalytic reactions with a suite of in situ generated ruthenium photocatalysts containing hitherto unknown complexes, and through the rapid discovery of reactivities previously unreported for ruthenium.The diverse applicability observed is suggestive of a generic platform for reaction simplification and accelerated synthetic discovery that will enable broader applicability and accessibility to state-of-the-art ruthenium catalysis.
Synthetic chemistry has experienced substantial progress through the development of innovative catalysts, capable of modifying both simple and complex molecules with high efficiency and selectivity 1,2 .One crucial aspect of these advances has been the advent of robust catalysts that can be easily used and that operate under mild conditions, broadening their utility and applicability 3,4 .For example, the versatility of complexes such as palladium acetate or bis(cyclooctadiene) nickel(0), and their ability to form in situ new complexes, have been pivotal in shaping the development of palladium 5,6 and nickel catalysis, respectively 7,8 .Ruthenium catalysts have exhibited powerful versatility for a broad selection of applications 9 .For example, a variety of synthetically powerful C-H functionalization reactions has been demonstrated using ruthenium catalysis 10,11 .However, despite their widespread utility, many of the developed protocols have necessitated either high reaction temperatures (80-140 °C) or light irradiation, which has limited overall ease of use and their suitability for the diversification of delicate high-complexity substrates and biomolecules 12 .This is a common occurrence when widely applied η 6 -arene coordinated ruthenium species such as [(p-cymene)RuCl 2 ] 2 1 (ref.13) and benzene analogue 2 are used, as they typically require additional energy to access active catalyst species (Fig. 1a).
In 2018, we reported the development of a monocyclometallated ruthenium catalyst, [(C 6 H 4 CH 2 NMe 2 )Ru(MeCN) 4 ]PF 6 4, that showed high activity at moderate temperatures (35-50 °C) for the C(sp 2 )-H arylation of arenes 12 .This precatalyst allowed for the direct late-stage C(sp 2 )-H arylation and alkylation of a wide array of pharmaceuticals Article https://doi.org/10.1038/s41557-024-01481-5 the labile ligand sphere allows for facile photocatalyst formation via mechanochemical milling, and additionally enables the rapid screening, optimization and selection of photocatalysts through in situ generation of photocatalyst species.The ease of use of RuAqua 3 should provide access to a broad suite of ruthenium-catalysed transformations to the widest possible userbase.

Design, synthesis and stability of RuAqua
Successful realization of an air-and moisture-stable ruthenium precatalyst that imparted comparable levels of reactivity to that observed for monocyclometallated complexes such as 4 and 5 hinged on the design of a suitably balanced ligand set.The selected ligand framework would be key to render the resulting complex air-and moisture-stable but at the same time allow for facile access to catalytically active species in the presence of added substrates or reagents.From our previous work, we mechanistically posited that cyclometallated complex 4 underwent precatalyst activation from rapid ligand exchange when excess directing group arenes were added 12 .Guided by this hypothesis, we considered that a hexaaquaruthenium(II) complex containing six water ligands, that is, [Ru(H 2 O) 6 ] 2+ , could be a suitable starting point because monodentate aqua ligands are generally more labile than other strongly and other biologically relevant molecules.Despite its powerful reactivity, the considerable air sensitivity of 4 has limited its synthetic applicability, requiring specialized storage and handling techniques that have prevented general adoption in most synthetic laboratories and within industrial settings.Key to any broadly applicable synthetic innovation is the use of operationally simple reagents and precatalysts that enable use by both the specialist and non-expert scientist.
Considering these limitations, the development of air-stable precatalysts with similar transformative power as air-sensitive complexes such as 4 is critical for increasing the accessibility and use of ruthenium catalysis.Therefore, we questioned the feasibility of designing a synthetically accessible precatalyst that would contain a balanced selection of ligands with varied labilities that would be both air-and moisture-stable and possess high levels of native reactivity.In this article, we present the development and broad applicability of an airand moisture-stable ruthenium precatalyst, [( t BuCN) 5 Ru(H 2 O)](BF 4 ) 2 'RuAqua' 3, which displays a similar reactivity profile in C(sp 2 )-H functionalization to air-sensitive monocyclometallated complexes 4 and 5, and does not require strict air-free handling or storage.Importantly, the versatility of RuAqua 3 extends to a diverse suite of synthetic transformations, including C-H functionalization, alkene isomerization, alkene oxidative cleavage and reductive transformations.Moreover,  )-H bond activation under mild reaction conditions using 3 to give biscyclometallated species 7-a key species required for reactivity with halide nucleophiles.Yield was determined by 19 F NMR using 1,4-difluorobenzene as an internal standard.r.t., room temperature.

Article
https://doi.org/10.1038/s41557-024-01481-5coordinating heteroatom donors or multidentate ligand frameworks.Given the high exchange rate constant observed for aqua ligands within [Ru(H 2 O) 6 ] 2+ (k = 1.8 × 10 −2 s −1 ), the use of this class of complex would conceptually allow for rapid precatalyst activation by fast sequential ligand exchange reactions 14 .However, Ludi and co-workers previously reported that hexaaquaruthenium(II) complexes underwent rapid oxidation in an aqueous solution and thus indicated that these species were not stable to atmospheric oxygen 15 .
We previously reported the use of an air-and moisture-stable hexakis(pivalonitrile)ruthenium(II) complex [Ru( t BuCN) 6 ](BF 4 ) 2 for the C-H functionalization of benzoic acid derivatives, fluoroarenes and arenes bearing nitrogen-based directing groups 16,17 .However, in each of these applications this complex required high reaction temperatures to enable precatalyst activation by thermally induced ligand exchange.The necessity for elevated reaction temperatures is coherent with the low nitrile ligand exchange rate constant observed for the analogous hexakis-acetonitrile complex [Ru(MeCN) 6 ] 2+ (k = 8.9 × 10 −11 s −1 ), that is, eight orders of magnitude slower than that of the corresponding aqua complex 14 .
To apply this knowledge, we considered an alternative precatalyst design using a hybrid mixed ligand set that consisted of both nitrile and aqua ligands.We reasoned that aqua ligands contained within any complex would essentially serve as pseudo-vacant sites to enable rapid reactivity and provide facile access to catalytically active species.Combined with the additional stability bestowed by nitrile ligands, this mixed ligand sphere design would confer both high levels of stability and reactivity in the presence of Lewis basic reactants.
To evaluate this hypothesis, we required synthetic access to a complex bearing a hybrid combination of both nitrile and aqua ligands.Therefore, we proceeded to synthesize a nitrile-containing complex starting with the zinc reduction of commercially available ruthenium(III) trichloride hydrate in pivalonitrile ( t BuCN) as a solvent to give a putative ruthenium(II) dichloride intermediate bearing four pivalonitrile ligands.From here, the non-isolated intermediate species was subjected to reaction with excess silver tetrafluoroborate that proceeded in water to give [( t BuCN) 5 Ru(H 2 O)](BF 4 ) 2 (3) following metathesis and ligand redistribution in 49% yield (Fig. 1b).Notably, this procedure could be conducted on a decagramme scale to generate >26 g of complex 3.The air-and moisture-stability of complex 3 was directly compared with that of cyclometallated species 4 and 5 (Fig. 1c).Whereas visible degradation of solid samples of sensitive complexes 4 and 5 was observed within hours, the mixed hybrid complex 3 showed robust tolerance to air (stable >1 year).Similarly, while benzylamine containing cyclometallated complex 4 decomposes in oxygenated solutions at room temperature within minutes, 3 proved stable to the open air in acetone, dichloromethane and methanol solutions (Supplementary Table 1).Additional characterization, including ultraviolet-visible spectroscopy, cyclic voltammetry and thermogravimetric analysis, was conducted to further understand the physical properties of complex 3 (Supplementary Information, pages 14-20).With the stability of 3 established, the second key design criteria of reactivity under mild conditions was tested by direct application to C(sp 2 )-H bond activation (Fig. 1d).Specifically, the reaction of 3 with phenylpyridine derivative 6 was achieved under mild reaction conditions (40 °C) to give biscyclometallated species 7 (80%, 4 h).Taken together, the stability of 3 and the ability to easily participate in C(sp 2 )-H bond activation without excessive applied heat or light irradiation was indicative of a viable and generally applicable alternative to many predecessor precatalysts.

RuAqua as a precatalyst for C(sp 2 )-H functionalization
Given that 3 was compatible with stoichiometric C(sp 2 )-H bond activation, the true test of utility was the application of substoichiometric quantities of 3 as a precatalyst to a range of synthetic transformations.Therefore, we initially targeted arene C(sp 2 )-H arylation using aryl halide electrophiles as coupling partners (Table 1) 12 .Direct arylation of 2-(o-tolyl)pyridine 8a using 5-bromo-m-xylene 9a proceeded using 3 (5 mol%) as a precatalyst under mild heating (40 °C) to selectively give arylated product 10a in excellent yield (92%).Notably, the analogous reaction using 4-iodoanisole 9b could be performed within an industrial setting (AstraZeneca) on a 5 g scale using dimethylcarbonate as the solvent in 78% yield (Supplementary Information, pages 26-27).This reactivity underscores the practical superiority and advantage of RuAqua 3 in comparison to predecessor precatalysts.Precatalyst 3 further demonstrated applicability to the direct late-stage functionalization of 8a using a selection of biologically active molecules, including haloperidol 9c, chlormezanone 9d, chlorpropham 9e and Ladasten 9f.Similarly, the identity of the directing-group arene was varied to utilize the benzodiazepine motif within diazepam 8b, and the imidazo[1,2-a]pyridine group of zolimidine 8c.In both cases, 8b and 8c underwent arylation with aryl halide electrophiles to give 11g and 11h in excellent yields (86% and 95%).The drug-drug conjugate 10i was effectively synthesized in useful yield (50%) through the direct coupling of zolpidem derivative 8d with clozapine 9h.In each reaction using biologically active molecules as coupling partners, the procedure using 3 as a precatalyst selectively gave the coupled products in excellent yields and as single regioisomers.
Applicability of 3 as a precatalyst was further extended beyond C(sp 2 )-H arylation to include ortho-selective C(sp 2 )-H alkylation with a selection of both primary and secondary halide electrophiles (Table 2, upper) 18,19 .Using the primary alkyl halide n-octylbromide 12a, alkylation of several unique directing-group arenes was achieved.Specifically, successful ortho-selective alkylation was achieved in good to excellent yields giving products including aryl-pyridine 14a, aryl-pyrimidine 14b, aryl-isoquinoline 14c, aryl-pyrazole 14d, diazepam 14e and aryl-ketone 14f motifs.Similar applicability was observed in the ortho-selective alkylation using secondary alkyl bromides (Table 2, lower).A bromide derivative of oxaprozin 13a containing a bromo-piperidine group underwent successful alkylation of 2-(o-tolyl)pyridine 8a to give 15a in good yield and as a single regioisomer.Similarly, pyrimidine 8f was selectively alkylated using 4-bromotetrahydro-2H-pyran 13b to give pyrimidine derivative 15b in excellent yield.Substrates bearing increased levels of structural complexity were also applicable to secondary ortho-selective alkylation.For example, diazepam 8b underwent ortho-alkylation using 4-bromotetrahydro-2H-pyran 13b in moderate yield giving 15c in 36% yield, and bromo-substituted epiandrosterone derivative 13c was coupled with 8j in excellent yield to give 15d as a single diastereomer.Attempts to carry out these reactions with RuCl 3 or ruthenium complex 1 led to low or no reactivity under the same reaction conditions (see 10d, 14c and 15b).
Considering the catalytic capability and tolerance of RuAqua 3 when applied to C(sp 2 )-H bond coupling of complex molecules containing extensive functional group diversity, it was plausible to further expand this class of reactivity.We previously reported a mild synthetic strategy for the direct C(sp 2 )-H bond methylation of arenes bearing nitrogen-based directing groups using N,N,N-trimethylanilinium salts 20 .The developed procedure used air-sensitive precatalyst 4 to achieve ortho-selective arene methylation.Therefore, RuAqua 3 was tested as an air-stable alternative under comparable reaction conditions to that found optimal for 4 (Fig. 2a).Using electron-deficient anilinium triflate 16 as a source of methyl-coupling partner, the direct methylation of aryl-pyrimidine 8k (17a), aryl-pyridine 8l (17b), aryl-isoquinoline 8g (17c) and diazepam 8b (17d) was achieved, giving products in good yields.Application to an aryl-pyridine bearing a structurally complex oestrone unit 8m was additionally achieved in excellent yield (17e).

Article
https://doi.org/10.1038/s41557-024-01481-5Contrastingly, ruthenium catalysis using tertiary alkyl halides has demonstrated a propensity for meta-selective addition [21][22][23] .Predominantly, this class of reactions has been facilitated through the use of η 6 -arene containing precatalysts such as [(p-cymene)RuCl 2 ] 2 1, and at high temperatures or under continuous light irradiation.We therefore queried if RuAqua 3 could serve as a suitable precatalyst for meta-selective alkylation, and if this reactivity could be achieved under milder conditions than had been used previously (Fig. 2b).Accordingly, 3 was used as the precatalyst for the meta-selective coupling between 2-phenylpyridine 8n and tert-butylbromide 18a at both 40 °C or under blue light irradiation, which in each case gave 19a in excellent yields and as a single regioisomer.Reactivity of this class operating under mild heating represents a meaningful improvement compared with previous reports that have typically required high temperatures (for example, 100-120 °C).The meta-selective reactivity was further exemplified using (−)-menthol-derivatized α-bromoester 18b which required 440 nm light to generate 19b in good yield.Alternative nitrogen-directing groups were similarly compatible.Specifically, aryl-pyrazole 8h and aryl-oxazoline 8o underwent successful reaction with tert-butylbromide 18a at 50 °C to give the meta-alkylated products 19c and 19d in excellent and good yields, respectively.Use of Katritzky salt 20 further demonstrated the capability of RuAqua 3 to serve as a generally applicable precatalyst for meta-selective alkylation reactions 24 .For example, reaction of 2-phenylpyridine 8n with 20 using 3 as a precatalyst gave meta-alkylated arene 19e in good yield.Use of α-bromoamide 21 bearing a pendant acrylate allowed for the formation of γ-lactam 19f following 5-exo intramolecular ring closure and subsequent meta-C(sp 2 )-H coupling 25 .
Given the demonstrated proficiency of RuAqua 3 in facilitating C(sp 2 )-H functionalization reactions, it was reasonable to hypothesize the presence of reactive aryl-ruthenium intermediates within the reaction mechanism.If this were the case, the addition of deuterium sources could potentially result in the incorporation of deuterium into the reacting substrate through reversible C(sp 2 )-H activation processes.To explore this possibility, we conducted a series of hydrogen/ deuterium exchange experiments using d 2 -D 2 O (Fig. 2c).These tests revealed substantial deuterium incorporation at the C(sp 2 )-H activation site within the arene.Specifically, 2-phenylpyridine 8n underwent hydrogen/deuterium exchange primarily at the ortho sites with remarkable levels of incorporation (95%).Similarly, 1-phenylpyrazole 8h, benzoic acid 22 and 2-phenylbenzothiazole 8p underwent C(sp 2 )-H activation and hydrogen/deuterium exchange with varying degrees of success, ranging from modest to excellent incorporations.

RuAqua as a general precatalyst and synthetic precursor
The comprehensive versatility exhibited by RuAqua 3 towards several reaction classes within C(sp 2 )-H bond functionalization suggested the possibility of wider generality.We recognized that the availability of

Article
https://doi.org/10.1038/s41557-024-01481-5 an air-stable high-utility precatalyst that could be applied in various synthetic transformations would be broadly beneficial to the scientific community.Thus, we questioned the expected capabilities of a generic ruthenium precatalyst (Fig. 3).Reaction of eugenol 23 with parts per million quantities of 3 as a precatalyst allowed for efficient gramme-scale alkene isomerization to give β-methylstyrene derivative 24 in excellent yield and with high diasteroselectivity (Fig. 3a).This reactivity compares favourably with that of previous precedent using organometallic ruthenium complexes (that is, Ru(η 3 -methylallyl) 2 (1, 5-cyclooctadiene, COD)) at elevated temperatures (150 °C) and with the lower reactivity displayed by both RuCl 3 and 1 (ref.26).RuAqua 3 further demonstrated reactivity in the anti-Markovnikov 1,2-hydroalkynylation of phenylacetylene 25 to give enyne 26 (Fig. 3b).Direct tertiary-C(sp 3 )-H bond oxidation of adamantane 27 was achieved using 3 as the precatalyst with excess sodium periodate to give both adamantan-1-ol 28a and adamantan-1,3-diol 28b in good overall yield (Fig. 3c) 27 .Moreover, the Curtius rearrangement of 29 containing the 1,4,2-dioxazol-5-one unit was facilitated using 3 to give isocyanate 30 in excellent yield (Fig. 3d).Additionally, RuAqua 3 proved effective for the oxidative cleavage of alkenes using sodium periodate (Fig. 3e) 28 .For example, stilbene 31a underwent efficient cleavage to give benzaldehyde 32a in good yield.Similarly, norbornene 31b, triprolidine 31c, lumefantrine 31d and anethole 31e were all applicable to RuAqua 3 catalysed oxidative cleavage to give their respective ketone and/or aldehyde products 32b-32e (and 32b′-32e′).The transfer hydrogenation of ketones could additionally be facilitated using 3 (Fig. 3f) 29 .Specifically, we targeted the reduction of simple ketones 33a-33d using isopropanol as the terminal reductant which gave alcohols 34a-34d in moderate to excellent yield.Moreover, the transfer hydrogenation showed reactivity when directly applied to the biologically active substrate fenofibrate 33e, which gave the corresponding alcohol 34e, albeit in low yield.Importantly, the reactivity demonstrated by RuAqua 3 was either comparable or far superior to that of alternative ruthenium precatalysts for this range of established catalytic transformations.
The synthetic utility of RuAqua 3 as a stoichiometric complex precursor was demonstrated through the synthesis of a range of ruthenium photocatalyst species (Fig. 3g).Given the established lability of the monodentate ligands within RuAqua 3, we considered the ability of multidentate ligands to occupy the coordination sphere of ruthenium by displacement of the ligand set within 3. To probe this possibility, 3 was reacted with excess bipyridine using mechanochemical force in a solvent-free mixer mill (36 Hz, 1 h), which gave the well-established photocatalyst [Ru(bpy) 3 ] 2+ 35 in excellent yield (80%) 30 .This reactivity was extended to a range of analogous bipyridine and phenanthroline ligands to give a structurally differentiated set of photocatalyst species 36-40 in excellent yields in all cases (77-87%).Classically, [Ru(bpy) 3 ] 2+ 35 and analogous derivatives, such as 36-40, have typically been synthesized using RuCl 3 as a precursor, under reducing conditions and at high temperatures 31 .Therefore, the ability to rapidly form this family of high-reactivity complexes within a mixer mill provides a useful alternative that lowers the synthetic effort required to generate wide photocatalyst libraries.

RuAqua as a generic precatalyst for accelerated discovery
The established applicability of RuAqua 3 for a diverse suite of synthetic transformations is indicative of a broadly useful synthetic tool.In particular, the generalizability exhibited by 3 offers potential applicability as a baseline precatalyst for the accelerated discovery of
To assess this concept, we applied RuAqua 3 as a precatalyst in combination with both a reductant and a variety of potentially reducible compounds (Fig. 4).A varied substrate pool was selected as reaction targets, including carbonyls, alkenes, alkynes, nitriles, strained rings, imines, heterocycles and a nitro compound (Fig. 4a).Separately, each substrate was simultaneously reacted with both phenylsilane 41 and pinacolborane 42 using 3 as a precatalyst, in the absence of solvent and at room temperature (Fig. 4b) 32 .After 24 h, the conversions for each reaction were determined by 1 H NMR spectroscopy using an internal standard.Using silane reductant 41, 20 reactions showed reactivity out of 30 total reactions (67% hit rate, Fig. 4c, top).Similarly, 21 reactions showed reactivity using borane 42 (70% hit rate, Fig. 4c, bottom).In general, using both silane 41 and borane 42, carbonyl compounds (A1-A3, B4-B7), alkenes (A4-A6) and alkynes (A7-A9) underwent hydrosilylation and hydroboration (Supplementary Figs. 13 and 14).Nitriles (B1, B2) and nitro compound (C10) proved unreactive under reaction with silane 41.However, using borane 42 allowed for partial reaction of a nitro compound (C10).Notably, several heterocycles (within C1-C8) showed reactivity, highlighting the possibility of using RuAqua 3 as a precatalyst for heterocycle hydrofunctionalization 33,34 .In fact, the reaction of quinoline (C2) with borane 42 resulted in clean heterocycle hydrogenation to give the corresponding tetrahydroquinoline 46 in good yield (58% isolated), a transformation previously unknown with ruthenium 35,36 .Reaction results were validated by selection of specific examples and performing replicate reactions with product isolations (Fig. 4d).One powerful tenet of modern high-throughput screening and optimization methods is the modularity imparted by the choice of reactants, metal salts, ligands and solvents 37 .Conceptually, multifactorial reaction optimizations rely on the ability to use libraries of multiple components to combinatorically survey broad reaction space to find optimally efficient reaction conditions 38 .For synthetic catalysis, these strategies have benefited from the ability of available precursors to     undergo in situ complexation with added ligand libraries.This allows for the rapid assessment of many metal (pre)catalysts without the need for prior isolation and screening of each individual complex.The lability of the monodentate ligand sphere within RuAqua 3 therefore presented an opportunity to test if this concept could be applied within ruthenium catalysis.We specifically questioned if the in situ formation of ruthenium photocatalyst species would demonstrate this concept and allow for simultaneous screening of large ligand libraries in the optimization of Dexter energy transfer or photoredox catalysis without the need to separately synthesize each photocatalyst.This hypothesis was explored via the halogen-atom-transfer (XAT) radical Giese-type addition of isopropyl iodide 47 to methyl acrylate 48 (ref.39).A range of nitrogen-based ligands, including bipyridine derivatives (L1-L9), phenanthroline derivatives (L10-L14) and terpyridine L15, were precomplexed with RuAqua 3 (Fig. 4e).This process was conducted for 1 h in either acetonitrile or dichloromethane under blue light irradiation, followed by the addition of reactants 47 and 48.The reactions were sampled at 4 h and 18 h to create a reactivity map for   Article https://doi.org/10.1038/s41557-024-01481-5 all ligands in both solvents (Fig. 4f).The results indicated that bathophenanthroline (BPhen) ligand L13 performed optimally in acetonitrile and phenanthroline (Phen) ligand L10 in dichloromethane (Fig. 4g).Importantly, commonly used bipyridine (L1) led to poor reactivity in both solvents.To validate these findings, the isolated photocatalyst species 35 and 40 were tested in acetonitrile under the same reaction conditions (Fig. 4h).These results affirmed our high-throughput screen, with Ru(BPhen) 3 2+ 40 delivering a product yield of 85%, vastly outperforming Ru(bpy) 3 2+ 35, which gave only 22%.Taken together, these results illustrate the generic applicability of RuAqua 3 as a platform precatalyst for the discovery of synthetic inventions and for expedited multifactorial optimizations.
In summary, we have outlined the design and synthesis of an air-and moisture-stable ruthenium precatalyst [( t BuCN) 5 Ru(H 2 O)] (BF 4 ) 2 (3).Notably, synthetic access to decagramme quantities of 3 after two short and simple synthetic steps highlights the potential for ease of manufacture and widespread adoption.Application of 3 as a precatalyst demonstrated a generally applicable alternative to many predecessor complexes for several different C(sp 2 )-H bond functionalization reactions.Namely, 3 proved effective for ortho-C(sp 2 )-H arylation, alkylation and methylation and for meta-C(sp 2 )-H alkylation.Further capability for a range of diverse synthetic transformations was highlighted by successful demonstration of alkene isomerization, hydroalkynylation, C(sp 3 )-H oxidation, Curtius rearrangement, alkene cleavage and transfer hydrogenation.Moreover, the suitability for 3 to be used as a generic precatalyst for discovery was exemplified through successful application to the reduction of several classes of reducible compounds.Importantly, the labile ligand environment allowed for in situ formation of photocatalyst species, facilitating high-throughput screening and accelerating reaction optimization through catalyst selection.The broad generality and operational simplicity of RuAqua 3 provides a platform for the discovery and development of widely accessible ruthenium-catalysed synthetic transformations.

Fig. 4 |
Fig. 4 | Use of RuAqua 3 as a platform precatalyst for discovery.a-d, Discovery platform for reduction reactions using 3 as the precatalyst.a, Selection of unsaturated compounds explored.b, Reaction set-up: reactions were conducted neat and at ambient temperature (19 °C) for 24 h.c, Results: conversion percentages of starting materials were determined by 1 H NMR spectroscopy using an internal standard.d, Reactions were validated for select entries for both silane and borane reductants.e-h, High-throughput experimentation (HTE) photocatalyst selection by in situ formation of Ru(bpy) 3 2+ analogues applied to the XAT radical 1,4-addition.e, Ligands examined during screening.f, Reaction set-up: 3 premixed with L1-L15 in CH 3 CN/CH 2 Cl 2 and irradiated for 1 h; 47, 48 and NEt 3 (2.0 equiv.)were then added, and the mixture was further irradiated for 18 h.g, Results: reaction yields were determined by gas chromatography with flame ionization detection using an internal standard.h, Photocatalyst 40 (from L13) was isolated and used directly in the reaction and compared to [Ru(bpy) 3 ](BF 4 ) 2 .

Table 2 | Precatalyst applicability for the direct C(sp 2 )-H bond alkylation of directing-group arenes using halide electrophiles under mild reaction conditions
a Yields determined by 1 H NMR spectroscopy using an internal standard.b 3 (20 mol%).c 96 h.