Chemoselective umpolung of thiols to episulfoniums for cysteine bioconjugation

Cysteine conjugation is an important tool in protein research and relies on fast, mild and chemoselective reactions. Cysteinyl thiols can either be modified with prefunctionalized electrophiles, or converted into electrophiles themselves for functionalization with selected nucleophiles in an independent step. Here we report a bioconjugation strategy that uses a vinyl thianthrenium salt to transform cysteine into a highly reactive electrophilic episulfonium intermediate in situ, to enable conjugation with a diverse set of bioorthogonal nucleophiles in a single step. The reactivity profile can connect several nucleophiles to biomolecules through a short and stable ethylene linker, ideal for introduction of infrared labels, post-translational modifications or NMR probes. In the absence of reactive exogenous nucleophiles, nucleophilic amino acids can react with the episulfonium intermediate for native peptide stapling and protein–protein ligation. Ready synthetic access to isotopologues of vinyl thianthrenium salts enables applications in quantitative proteomics. Such diverse applications demonstrate the utility of vinyl-thianthrenium-based bioconjugation as a fast, selective and broadly applicable tool for chemical biology.

Cysteine conjugation is an important tool in protein research and relies on fast, mild and chemoselective reactions.Cysteinyl thiols can either be modified with prefunctionalized electrophiles, or converted into electrophiles themselves for functionalization with selected nucleophiles in an independent step.Here we report a bioconjugation strategy that uses a vinyl thianthrenium salt to transform cysteine into a highly reactive electrophilic episulfonium intermediate in situ, to enable conjugation with a diverse set of bioorthogonal nucleophiles in a single step.The reactivity profile can connect several nucleophiles to biomolecules through a short and stable ethylene linker, ideal for introduction of infrared labels, post-translational modifications or NMR probes.In the absence of reactive exogenous nucleophiles, nucleophilic amino acids can react with the episulfonium intermediate for native peptide stapling and protein-protein ligation.Ready synthetic access to isotopologues of vinyl thianthrenium salts enables applications in quantitative proteomics.Such diverse applications demonstrate the utility of vinyl-thianthrenium-based bioconjugation as a fast, selective and broadly applicable tool for chemical biology.
Efficient functionalization of proteins is challenging because it requires fast and chemoselective reactions that produce stable conjugates under biocompatible conditions.Introduction of a functional group at a specific position in the protein is achieved with methods that modify amino acid residues with low natural abundance 1 such as cysteine (Cys) 2 , methionine 3,4 , tryptophan 5,6 and tyrosine 7 .Due to its high intrinsic reactivity and easy incorporation via site-directed mutagenesis, Cys is often the target of choice for site-selective bioconjugations under physiological conditions 8 .A common approach exploits the reactivity between Cys and electrophiles, such as Michael acceptors [9][10][11] , α-halocarbonyls 12 , organometallic reagents 13 , disulfides 14 , hypervalent iodine reagents 15,16 , phosphonamidates 17 or perfluoroarenes 18 , that carry a payload of interest.Many methods allow for fast and efficient Cys functionalization.However, each functionalization to introduce a specific payload requires synthesis of a new derivative of the reagent if not commercially available.
An alternative strategy entails Cys transformation into an electrophilic linchpin for subsequent follow-up modifications.For example, reagents that contain multiple electrophilic positions can react with Cys and retain an electrophilic site [19][20][21][22] , Cys can be converted to form https://doi.org/10.1038/s41557-023-01388-7 VTFT functionalizes Cys even faster with a determined second-order rate constant of 310 ± 8 M −1 s −1 , which is the same order of magnitude as the conjugation with alkylmaleimides 10 .The difference in rate between VTT and VTFT is due to the electronic effects arising from the four fluoride substituents on tetrafluorothianthrene (TFT) 35 .Due to the high reactivity and chemoselectivity of both VTT and VTFT, the conjugation reactions were readily extended to proteins.For example, full conversion of the superfolder green fluorescent protein (sfGFP) S147C mutant to the azidated product 2 was observed within 120 s under biocompatible reaction conditions at pH 7.0 (Fig. 1d and Supplementary Figs.118 and 119).To ensure that the redox-active cysteinyl thiols for protein ligation are not present in higher oxidation states 36 , a small excess of reducing tris(2-carboxyethyl)phosphine (TCEP) was added prior to addition of vinyl thianthrenium.No reported method allows for introduction of alkyl azides into proteins from azide at such high rates and mild conditions in a single step.
dehydroalanine by elimination [23][24][25] , or be transformed into electrophilic palladium complexes 26 .In an additional, subsequent step, nucleophiles are added to the initially formed electrophilic products to form the desired bioconjugates.The inherent advantage of this approach is that multiple bioconjugates can be formed based on a single introduced linchpin.However, the two-step sequence used in current methods is necessary to convert Cys into a linchpin before the nucleophile can be added to avoid cross-reactivity.Otherwise, the reagent required to furnish the linchpin would be quenched by the excess nucleophile.It is therefore necessary for the formed electrophilic intermediates to persist in solution, and that these intermediates can only be functionalized with strong nucleophiles in the next step because their stability results in attenuated reactivity.
We envisioned that a Cys-selective reagent that, upon conjugation, results in formation of a more reactive electrophile in situ would enable reactions with various nucleophiles that are not reactive enough to be used with current methods.Our group has previously reported the synthesis and reactivity of several thianthrenium-based compounds, for example, aryl-27 and trifluoromethyl 28 thianthrenium salts, which can access reactivity that goes beyond what has been possible with conventional halides or pseudohalides 29,30 .Based on the promising and distinct reactivity that the thianthrenium substituent can impart, we hypothesized that vinyl thianthrenium salts can be used to achieve versatile functionalization of biomolecules with different complexity at biocompatible conditions, and provide the opportunity to install a stable linker that is shorter than other methods allow.

Kinetic profile of the bioconjugation
Vinyl thianthrenium tetrafluoroborate (VTT) and vinyl tetrafluorothianthrenium tetrafluoroborate (VTFT) (Fig. 1a) are bench-stable, water-soluble vinylating reagents, which can be accessed in one step from ethylene gas 31 .The fundamental difference in reactivity of VTT and its tetrafluoro derivative VTFT when compared to conventional Michael acceptors such as maleimides lies in the identity and reactivity of the cationic intermediates formed after chemoselective addition to Cys to enable a one-step bioconjugation with otherwise unreactive nucleophiles present in the mixture (Fig. 1b).The cationic thianthrenium moiety in VTT and VTFT makes the reagents reactive Michael acceptors, while its ability as a leaving group enables its ensuing displacement from alkylsulfonium intermediate A to yield episulfonium intermediate B (Fig. 1c), a reactive species for reactions with various nucleophiles.
For example, in situ formation of B in the presence of sodium azide results in formation of the azidated tripeptide glutathione (GSH) 1 in 91% yield, without any observed side reactivity.Formation of B as the key intermediate is supported by NMR studies: when the reaction is performed in a deuterated buffer, the formed product has an equal distribution of deuterium over the ethylene bridge, consistent with the presence of a cyclic, symmetric intermediate prior to addition of azide (Supplementary Fig. 208).Kinetic studies revealed reaction orders of 0 for azide and 1.0 for VTFT and GSH, respectively, in line with episulfonium ring-opening after the rate-determining step.To distinguish between rate-determining Cys addition to VTFT and episulfonium formation, we performed a competition experiment between VTFT and VTFT-d 3 and observed an inverse secondary kinetic isotope effect (KIE) of 0.81 (Supplementary Figs.201 and 202).The KIE value is consistent with a change of hybridization from sp 2 to sp 3 at the reacting carbon in the rate-limiting step and excludes rate-limiting episulfonium formation 32 .The data are in agreement with rate-limiting addition of Cys to VTFT, followed by fast episulfonium formation and ensuing rapid, irreversible nucleophilic opening with azide.
The reaction between GSH, VTT and NaN 3 in sodium phosphate buffer (NaP i ) at pH 7.4 has a second-order rate constant of 38.1 ± 0.1 M −1 s −1 , and proceeds faster than the click reactions commonly used for chemical ligation 33 or Cys alkylation with iodoacetamide 34 .pre-reduction at 37 °C.c, Reactivity of DHAR1 mutants with VTT and N-methylmaleimide (NMM) and enzyme assay subsequent to the modification.The data are expressed as mean ± s.e. of nine independent experiments.The statistical analysis was performed via a two-sided analysis of variance, followed by post hoc Tukey test with P < 0.05 (see Supplementary Tables 11 and 12 for exact P values).The following publicly available protein structures were used: ubiquitin (PDB:1D3Z) and DHAR1 (PDB:5EL8).https://doi.org/10.1038/s41557-023-01388-7

Site selectivity and site specificity of the reaction
Chemical modifications of biomolecules are often utilized to study native structures and enzymatic activity.Therefore, it is important that bioconjugation is site selective and the protein structure not significantly altered 37 .We used protein NMR as a non-invasive method to inquire about the chemoselectivity of the thianthrene-based transformation and the potential resulting structural perturbation in the tertiary structure of the protein 38 .Heteronuclear single quantum coherence (HSQC) NMR experiments of 13 C, 15 N-labelled ubiquitin T12C prior to and after reaction with VTT and sodium azide showed an average weighted chemical shift perturbation of 2.40 ppm for Cys in the 13 C NMR resonances.All other amino acids only displayed changes of up to a maximum of 0.11 ppm in the 13 C NMR resonances, and amino acids at a distance larger than 16 Å relative to the Cys sulfur atom only showed perturbations up to 0.01 ppm.The data are consistent with high chemoselectivity for Cys modification (Fig. 2a).In addition, nuclear Overhauser effect spectroscopy (NOESY) experiments of unlabelled protein before and after conjugation were carried out.The obtained data indicate less than 3% change in interproton distances and therefore minimal structural changes and preservation of the tertiary protein structure (Fig. 2a).
When the reaction was performed on an entire Escherichia coli (E.coli) cell lysate containing various native proteins, we observed 90% chemoselectivity for Cys modification for VTT and 85% for VTFT at pH 7.0, as determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis of the tryptic digest (Fig. 2b).Even when the pH was changed to 6.5 and 7.9, respectively, the high selectivity was retained in all cases, which is noteworthy given the presence of a variety of native proteins with different microenvironments and numerous competing amino acid residues, including hyper-reactive residues 12,39 .Previously reported Cys-selective reagents for proteomics such as iodoacetamide or tetrafluoroalkyl benziodoxoles reach Cys coverages of 0.5% and 1.6%, respectively 40,41 .At pH 7.9, VTFT labels 2.7% of all available cysteines even at concentrations of only 0.2 mM (Supplementary Table 2).
Site-specific Cys modifications are often challenging due to insufficient discrimination between different Cys residues.For example, maleimides are usually not able to distinguish between multiple Cys residues on the same protein and therefore cannot usually be utilized to modify proteins that contain catalytically active cysteinyl thiols 8 .To evaluate a potential site specificity of VTT, we introduced surface-exposed Cys residues into dehydroascorbate reductase 1 (DHAR1), which already features two catalytic Cys residues in the active site.Functionalization of both S97C and S176C mutants with an excess of VTT led to a single modification of the introduced surface-exposed Cys and preservation of the enzyme activity.In contrast, conjugation of both enzymes with the equimolar concentration of N-methylmaleimide led to functionalization of both surface-exposed and internal, catalytic Cys, with a concomitant substantial decrease in catalytic activity (Fig. 2c).When no surfaceexposed Cys was introduced into the protein, VTT did not interfere with the catalytic Cys residues of DHAR1.However, maleimide reagents with different substituents readily react with the catalytic Cys residues of the native protein (Supplementary Figs.141-143).https://doi.org/10.1038/s41557-023-01388-7 Although steric repulsion might prevent VTT from reacting with the catalytic Cys residues, the unspecific reactivity of different arylmaleimide derivatives with DHAR1 suggests that the size of the reagent might not be the decisive factor for the site specificity.We speculate that the site specificity of vinyl thianthrenium reagents arises from the cationic charge of the thianthrene moiety which leads to repulsion in hydrophobic areas or environments with high concentrations of positively charged amino acids.These results bode well for potential applications of VTT for site-specific functionalization of proteins or enzymes that contain several and even catalytic Cys residues.

Episulfonium enables versatile bioconjugation
Based on their promising reactivity and selectivity, we evaluated a diverse set of recombinant and native Cys-containing proteins of various sizes and functions for azidoethylation (Fig. 3a).In each case, the LC-MS analysis of the product shows >95% conversion in all the cases and formation of the desired species in yields of at least 85% in all the quantifiable cases.Although close to the protein surface as a consequence of the short linker, the furnished azide can readily be utilized in copper-catalysed or strain-promoted click reactions (Supplementary Figs.97-100).
In contrast to the previously reported methods for cysteine bis-alkylation 42 , the episulfonium intermediate, such as B, does not eliminate to form dehydroalanine.Instead, given the high reactivity of B for nucleophilic ring opening, bioconjugation through opening of B with other bioorthogonal nucleophiles, less reactive than azide, is possible and efficient (Fig. 3b).For example, anilines can be used to install NMR-active nuclei 43  (12, 13) or bioorthogonal functionalities 44  (14).Introduction of sulfur-centred nucleophiles gives access to thiocyanate (15) as an infrared label 45 , thiosulfate ( 16) as a mimic for sulfation 46 and thiophosphate as mimic for phosphorylation 47  (17).Iodide can be utilized to form primary alkyl iodide intermediates (Supplementary Figs.211, 213 and 214), which can then be functionalized with thiol-based nucleophiles to introduce mimics for glycosylation 48 (18), reversible modifications in the form of thioesters 49  (19), lysine methylation 50  (20) or to attach an affinity tag for purification (21).The episulfonium approach enables bioconjugation with a broad set of different nucleophiles as weak as anilines in a convenient one-pot process, which no other method appears to allow.No hydrolysis, that is, episulfonium opening with the solvent water, was detected for the various nucleophiles shown in Fig. 3b, except for the anilines and 21, when up to 15% of the water addition by-product was observed as determined by LC-MS (Supplementary Table 5).
To investigate potential side reactivity that might go undetected in the presence of excess exogenous nucleophiles, we performed control reactions without any additives except for reductant and buffer.When sfGFP S147C, DHAR1 S97C and DHAR1 S176C were modified with VTT in the absence of additional nucleophiles, LC-MS measurements revealed intramolecular ring opening of the episulfonium intermediates and phosphate adducts from the phosphate buffer in addition to the already observed hydrolysis side reaction.Because intramolecular cross-linking can be accompanied by structural alteration and loss of function 51 , the proteins were subjected to activity assays to probe such scenarios.All activity assays of the modified proteins, however, showed no statistically relevant alteration of protein function compared to the non-modified proteins (Supplementary Figs.162 and 167).We speculate that the formation of the covalent linkage between two nucleophilic amino acids only takes place if the two residues are already located in close proximity to each other and therefore does not influence the tertiary protein structure and the function of the protein upon intramolecular reaction.Dose-dependence experiments with sodium azide revealed that the presence of 40 mM of exogenous nucleophile is sufficient to ensure the formation of the desired product (Supplementary Fig. 110).The fact that different nucleophiles can be installed only four atoms remote from the amide backbone allows for modulation of the protein in close proximity to its surface.

Peptide stapling with vinyl thianthrenium
We hypothesized that the intramolecular reactivity of the episulfonium intermediate with nucleophilic amino acids can be utilized for the synthesis of macrocyclic, stapled peptides.Peptide stapling can induce and stabilize helicity in peptides, which increases metabolic stability 52 a major goal in the development of peptide-based therapeutics 53 .Stapling of natural amino acids is attractive because it allows the use of native peptides to avoid the synthesis of unnatural amino acids and peptides 54 .We used VTT to introduce the short, stable ethylene linker into peptides containing Cys and another nucleophilic amino acid in an i, i + 4 relationship 55 .Cys-Lys, Cys-Cys and Cys-Glu linkages were introduced to form stapled peptides in 48-63% isolated yield (Fig. 4a).This strategy provides an excellent method for stapling of three different pairs of natural amino acids, including non-activated carboxylic acids, via a very small hydrocarbon-based linker.Vinyl thianthrenium salts can also be used to irreversibly transform labile disulfide bonds in pharmaceutically relevant peptides into thioethers and provide immediate access to stable disulfide mimetics under physiological conditions.Macrocyclic analogues of oxytocin, octreotide and lypressin were obtained directly from the native peptides in 61-74% isolated yield (Fig. 4b).

Quantitative proteomics and protein-protein cross-linking
The scalability of and easy synthetic access to VTT and VTFT from ethylene allows for a straightforward synthesis of isotopically enriched reagents for advanced applications in mass spectrometry (MS).For example, MS-based quantitative proteomics relies on isotope-enriched reagents and is used to quantify proteins 56 or redox states 57 in complex native systems.We accomplished the synthesis of [ 2 H 3 ]VTT and [ 13 C 2 ] VTT isotopologues on a decagram scale in a single step.To evaluate whether the reagents can serve to read out and quantify cellular stress responses, we performed a heat-shock experiment with E. coli as a model organism.We treated E. coli lysates derived from cell cultures that were incubated at 37 °C and 43 °C with unlabelled and labelled VTT, respectively, in the presence of azide.Equimolar mixtures of unlabelled and labelled tryptic digests of the lysates were then analysed via LC-MS/MS.The 1:1 mixture of 12 C-and 13 C-modified lysates revealed 244 Cys-containing peptides, of which 20 showed a statistically significant change in abundance caused by the elevated temperature (Fig. 5a).The same experiment with 2 H 3 -labelled VTT resulted in a Pearson correlation coefficient of 0.76 when compared to the results with 13 C-labelled VTT.The reliability of the experimental set-up was further supported by data obtained for the groL gene that codes for a heat-shock protein 58 (Fig. 5a).Heat-shock proteins are expressed to ensure proper folding of other proteins under extreme conditions, and the corresponding peptides were only found in the lysates incubated at 43 °C.If desired, the introduced azide can be utilized to attach an additional affinity handle after the initial functionalization step to increase sensitivity of the whole set-up 15,16,40 .Hence, vinyl thianthrenium salts can be used for isotope-coded affinity tagging strategy with adjustable sensitivity induced by the choice of nucleophile.
A salient feature of VTT is its ability to introduce a short two-carbon linker, which may identify protein-protein interactions (PPIs) that are not detectable with other reagents 59 .To test this hypothesis, we treated E. coli lysates with VTT in the absence of additional exogenous nucleophiles.Tryptic digestion and LC-MS/MS analysis led to the identification of a previously unappreciated PPI, discovered through a Cys-Cys cross-link between lysine-sensitive aspartokinase 3 and poly(A) polymerase I. Based on the short length of the ethylene linkage and the identity and the position of the cross-linked amino acids, a protein-docking simulation with geometrical restraints from 2 to 6 Å was performed.The calculation indicates a PPI between the two https://doi.org/10.1038/s41557-023-01388-7 proteins where both Cys residues are located 3.7 Å apart from each other (Fig. 5b).The same PPI was detected in similar abundance when the heat-shock lysate was modified with isotope-labelled VTT derivatives.Currently, no other Cys-Cys cross-linking reagents appear to be available that would furnish such a short linkage and, hence, be able to link two residues so proximal to one another.Moreover, there appears to be no comparable system that provides a quantifiable tool for applications in Cys tagging and cross-linking based on a single reagent.

Conclusions
Cys conjugation is a state-of-the-art tactic to introduce modifications into biomolecules, but access to a variety of modifications currently requires substantial synthetic effort to prepare new reagents or is complicated by the low reactivity of introduced linchpins.Vinyl thianthrenium salts unite versatility and site selectivity, and lead to a common, reactive, cationic species that can be diversified to a large battery of conjugates with a short two-carbon linker.The single set of a few globally applicable and practical thianthrenium salts, including their readily accessible isotopologues, permits user-friendly applications in quantitative derivatization and analyses of single peptides, proteins and complex protein mixtures in different important disciplines in chemical biology.

General protein modification protocol
At 20-25 °C, the protein starting material in NaP i , HEPES or Bis-Tris buffer (pH 7.0, 50 mM) was added to a 1.5 ml Eppendorf tube.Next, the protein solution was diluted with buffer and TCEP (5-10 equiv.) in ultra-high-quality (UHQ)-H 2 O was added.The mixture was vortexed for 1 s, transferred into a Thermocycler preheated at 37 °C, and incubated at 37 °C for 1 h at 400 r.p.m.Next, a nucleophile stock solution in the respective buffer (pH 7.0, 50 mM) was added to the mixture at 20-25 °C to obtain a nucleophile concentration of 3-100 mM and a protein concentration of 15-30 µM.The nucleophile concentration varies depending on the chosen nucleophile (Supplementary Information).Next, a vinyl thianthrenium salt (12-30 equiv.) was added as a stock solution in dimethylformamide (DMF).The amount of DMF should not exceed 1% v/v of the whole mixture.The reaction mixture was vortexed for 1 s, transferred into a Thermocycler preheated at 25 °C, and incubated at 25 °C at 400 r.p.m. for either 5 min (VTFT) or 30 min (VTT).

Protein modification protocol for thiol nucleophiles
At 20-25 °C, the protein starting material in NaP i , HEPES or Bis-Tris buffer (pH 7.0, 50 mM) was added to a 1.5 ml Eppendorf tube.Next, the protein solution was diluted with buffer and TCEP (5-10 equiv.) in UHQ-H 2 O was added.The mixture was vortexed for 1 s, transferred into a Thermocycler preheated at 37 °C and incubated at 37 °C for 1 h at 400 r.p.m.Next, a sodium iodide stock solution in the respective buffer (pH 7.0, 50 mM) was added to the mixture at 20-25 °C to obtain an iodide concentration of 40 mM and a protein concentration of 15-30 µM.Next, 15-30 equiv. of VTFT was added as a stock solution in DMF.The amount of DMF should not exceed 1% v/v of the whole mixture.The reaction mixture was vortexed for 1 s, transferred into a Thermocycler preheated at 25 °C, and incubated at 25 °C at 400 r.p.m. for exactly 3 min.Immediately afterwards, a thiol stock solution in the respective buffer (pH 7.0 or 8.0, 50 mM) was added to the mixture to obtain a nucleophile concentration of 20-50 mM.The concentration varies depending on the chosen thiol (Supplementary Information).The mixture was incubated at 25 °C at 400 r.p.m. for 30 min.

Peptide stapling
At 20-25 °C, a screwcap vial (20 ml) was charged with peptide S10 (10.0 mg, 7.00 µmol, 1.00 equiv.)and a Teflon-coated magnetic stirring bar.MeCN (4.5 ml) and UHQ-H 2 O (500 µl) were added and the resulting solution was stirred for 3 min.Then, NEt 3 (2.15µ, 1.56 mg, 15.4 µmol, 2.20 equiv.) was added and the mixture was stirred again for 3 min.Next, a 1 M solution of VTT in DMF (7.70 µl, 7.70 µmol, 1.10 equiv.) was added and the solution was stirred for 1 h.The reaction mixture was filtered and the filtrate was purified by HPLC.Fractions containing the product were collected and lyophilized to afford the stapled peptide 22 as a colourless powder (6.4 mg, 4.4 µmol, 63% yield).

Disulfide rebridging
At 20-25 °C, a round-bottom flask (25 ml) was charged with Lypressin (10.5 mg, 9.94 µmol, 1.00 equiv.)and a Teflon-coated magnetic stirring bar.Then, 5.0 ml of sodium phosphate buffer (pH 7.0, 100 mM) and 4.1 ml of UHQ-H 2 O were added to the flask and the starting material was dissolved while stirring at 300 r.p.m.Next, a freshly prepared 20 mM solution of TCEP•HCl in UHQ-H 2 O (0.65 ml, 13 µmol, 1.3 equiv.) was added to the flask and the mixture was stirred at 300 r.p.m. for 1.5 h at 25 °C.A 50 mM solution of VTFT in DMF (0.21 ml, 10 µmol, 1.1 equiv.) was added dropwise over 1 min and the mixture was stirred for 15 min.The reaction mixture was filtered and the filtrate was purified by HPLC.Fractions containing the product were collected and lyophilized to afford the stapled peptide as a colourless powder (9.7 mg, 7.4 µmol, 74% yield).

Reporting summary
Further information on research design is available in the Nature Portfolio Reporting Summary linked to this article.

Fig. 1 | 2 √ 2 bFig. 2 |
Fig. 1 | Biofunctionalization with vinyl thianthrenium reagents.a, The vinyl thianthrenium reagents VTT and VTFT utilized in this work.b, Strategy for the in situ activation of Cys based on site-selective linchpin formation in the presence of other amino acids and exogenous nucleophiles.c, Proposed mechanism for the umpolung of thiols based on the KIE determined via a competition experiment between VTFT and VTFT-d 3 and the second-order rate constant for the functionalization of GSH with VTFT.d, Bioconjugation of sfGFP S147C with VTFT and sodium azide.The following publicly available protein structure was used: sfGFP (PDB:2B3P).His, histidine; Lys, Lysine; Tyr, tyrosine; Nu, nucleophile.

3 Fig. 5 |
Fig. 5 | Applications of VTT in proteomics.a, Application of VTT isotopologues in quantitative proteomics.Reaction with control and heat-shock lysates from E. coli cultures incubated at 37 °C or 43 °C, respectively, prior to lysis; mean of MS 1 intensities from Cys-containing peptides functionalized with isotopologues of VTT and their respective protein origins.Data are derived from two technical replicates; volcano-plot with auxiliary lines resulting from two-sided linear models for microarray data (LIMMA)-based differential expression analysis 60 with P < 0.05 derived from MS 1 intensities of identified peptides based on two technical replicates.All P values are associated with empirical Bayes moderated t-statistics without adjustments for multiple comparisons.The horizontal auxiliary line indicates the limit of significance based on P < 0.05.The vertical auxiliary lines indicate the values at which the protein populations have at least halved or doubled.b, Identified and simulated PPI between poly(A) polymerase I and lysine-sensitive aspartokinase 3 via VTT induced cross-linking in an E. coli lysate.MS 1 , ion spectra of intact peptides.