Abstract
Exomoons represent a crucial missing puzzle piece in our efforts to understand extrasolar planetary systems. To address this deficiency, we here describe an exomoon survey of 70 cool, giant transiting exoplanet candidates found by Kepler. We identify only one exhibiting a moonlike signal that passes a battery of vetting tests: Kepler1708 b. We show that Kepler1708 b is a statistically validated Jupitersized planet orbiting a Sunlike quiescent star at 1.6 au. The signal of the exomoon candidate, Kepler1708 bi, is a 4.8σ effect and is persistent across different instrumental detrending methods, with a 1% falsepositive probability via injection–recovery. Kepler1708 bi is ~2.6 Earth radii and is located in an approximately coplanar orbit at ~12 planetary radii from its ~1.6 au Jupitersized host. Future observations will be necessary to validate or reject the candidate.
Similar content being viewed by others
Main
In the last three decades, more than 4,000 planets around stars other than the Sun, exoplanets, have been discovered. These worlds display remarkable diversity, from highly eccentric Jupiters^{1} to compact, coplanar systems of terrestrial planets^{2}. In an effort to understand the formation and evolution of such systems, more detailed knowledge about their environment and properties is sought^{3}—such as the existence and nature of potential satellites^{4}. Given the abundance of moons in our Solar System, it is reasonable to presume that exomoons will reside around some exoplanets—which has motivated efforts to detect them^{5,6}.
One of the most promising strategies for seeking exomoons focuses on transiting planets^{7,8,9}: worlds that periodically eclipse their stars and make up the majority of the discovered exoplanets. However, the observational bias of transit surveys^{10} leads to an underrepresentation of longperiod, cool planets—precisely the type of planet where moons are thought to be most likely due to dynamical considerations^{11,12}. Nevertheless, a small sample of longperiod planetary candidates was discovered by Kepler^{13,14,15,16,17}—worlds with orbits greater than that of the Earth around the Sun. The Jupitersized planets amongst these are of particular interest, as satellite formation is thought to be a natural outcome of how such planets form^{18}.
To date, very little is known about the prevalence and properties of exomoons. Initial surveys largely focused on planets interior to 1 au (ref. ^{19}), since this was broadly the only sample available at the time. Around these relatively closein planets, large moons appear uncommon, with the abundance of Galileanlike satellite systems measured to be <38% to 95% confidence^{20}. However, amongst the longest periods of these worlds, the ~1 au Jupitersized planet Kepler1625 b was reported to exhibit a timing variation and transit signature consistent with a large Neptunesized/mass moon using Hubble Space Telescope photometry^{21}. Both of these were independently recovered in one study^{22}, but only one (the timing) in another^{23}—shown later to be possibly due to higher systematics in their photometric reduction^{24}. Much like hot Jupiters, such large moons were not widely anticipated in the literature. However, subsequent theoretical work has shown that the candidate exomoon could form through a capture scenario^{25} or a massive circumplanetary disk^{26}.
With no published exomoon surveys for planets at ≳1 au, and the intriguing hint of Kepler1625 bi, the aforementioned Kepler sample of longperiod giant planetary candidates represents one of the most promising unturned stones. To address this, we here present a survey of Kepler’s cool, gas giants.
Results
We first curated known longperiod transiting planets discovered by Kepler from the literature, selecting any object with a reported radius within a factor of two of Jupiter’s, and with either (1) a period of >400 d, (2) an equilibrium temperature of <300 K or (3) an instellation less than that of Earth (Methods). After removing any object listed as a false positive or with fewer than two available transits, our sample comprised of 73 cool giants.
After the analysis and removal of longterm systematic trends in the Kepler photometry, three targets were rejected as being of unacceptably poor quality. Lightcurve detrending was performed using four different algorithms applied to two photometric reductions, with the results crosscompared and averaged (‘method marginalized’), to ensure a robust correction against algorithmic choices (Methods).
For the 70 cool giants remaining, we fitted several lightcurve models to each detrended photometric time series. Using these fits, we applied a battery of initial tests to check for the presence of exomoons. These are described in detail in Methods, and include the following: (1) the Bayes factor of a photodynamical planet–moon model must be favoured over a planetonly model by at least a factor of 10 (that is, ‘strong’ evidence^{27}), (2) the light curve has to be consistent with a planet on a nearcircular orbit (as high eccentricities diminish the suitability for moons^{28,29}) and (3) if more than two transits are available the object should exhibit transit timing variations (TTVs). For the eccentricity test, it was necessary to derive fundamental stellar properties for each host star, which was achieved through an isochrone analysis (Methods).
Although our primary goal is to search for exomoons, these tests provide some novel dynamical insights that we highlight here. First, we find no clear correlation between planetary candidates that exhibit TTVs and those with eccentric orbits (Fig. 1). Further, the eccentricity distribution does not appear sufficiently extreme to explain the origin of hot Jupiters through tidal circularization theory^{30}. However, we do see tentative evidence that the eccentricity distribution consists of more than one component (Extended Data Fig. 1), indicative of multiple evolutionary paths.
From the initial trio of tests, 11 planetary candidates passed these criteria and were thus considered further (Supplementary Table 1). We emphasize that this does not mean that none of the other targets host moons; indeed, some of our moon fits may have recovered genuine moon signals. However, in each of these, there is at least one reason why the signal is weaker than that expected of a faultless detection. By rejecting these, we follow a conservative approach of only tolerating signals with zero reasons for concern.
We next applied three additional tests to the surviving 11 (Methods). Specifically, the light curves were refitted with another planet–moon model, but one that permits unphysical parameter values, such as a negativeradius moon (inverted transits) and unphysically large bulk densities for the planet and moon. This allowed us to fairly evaluate the preference of the models for (4) a nonzero moon mass, (5) a nonzero moon radius and (6) a positive moon radius.
Only three objects survive these additional checks: KIC8681125.01^{17}, KIC5351250.06 (also known as Kepler150 f^{31}) and KIC79068275.01^{17}. At this point, we turned to more detailed vetting tailored to each object. In general, our goal is to identify if there is any basis to eliminate the objects as possible exomoons, and we work through various tests in an effort to accomplish this. As soon as a test is failed, the object is rejected from further consideration, regardless of how compelling other aspects of the exomoonlike signal may have been.
Inspection of the bestfitting planet–moon model to KIC8681125.01 (Extended Data Fig. 2) revealed immediate cause for scepticism. No distinct moonlike features are observed, with the signal dominated by a transit depth change between the two available epochs of \(3{,}59{0}_{130}^{+160}\) ppm and \(3{,}03{0}_{110}^{+140}\) ppm. Since the two epochs are separated by six Kepler quarters, the spacecraft has physically rolled into a distinct position, meaning that unknown background stars can contribute differently between the two epochs. No highresolution imaging exists for this source, but Gaia lists the closest companion as 11.8 arcsec away and 1.7 mag fainter, which is somewhat too faint and distant to easily explain the required dilution. Sources interior to Gaia’s arcsecond resolving power^{32} remain possible, as (6.3 ± 0.9)% of singleplanetary candidate Kepler stars have companions within 2.0 arcsec (ref. ^{33}). However, as discussed in Methods, this possibility also does not easily explain the depth change, and an instrumental effect could ultimately be responsible too.
To evaluate the fitness of the blend model, we refit the light curve with the planetonly model but modifying it such that the second epoch is diluted by some factor, γ, from which we obtain γ = 1.188 ± 0.037. This model yields the highest marginal likelihood score of all models tried, implying a Bayes factor for the blend model of 6.8. Taking all these points together, questions certainly remain about the cause of the depth change, but we consider it unlikely that it is ultimately driven by an exomoon, given both the alternative possibilities and the nature of the signal.
Turning to Kepler150 f, inspection of the planet–moon fit reveals intransit morphological differences between the two available epochs. Unlike KIC8681125.01, this is not characterized by a simple depth change, but rather complex morphology, particularly within the second event (Extended Data Fig. 3). This raises concern that the signal is spurious and caused by Kepler150 f passing over dark starspots on the stellar surface, as has been reported previously^{34}.
As the star rotates, spots cause the brightness to periodically change. If the second transit was afflicted by spots, one might expect it to coincide with a flux minimum in these rotational modulations^{34}, when we are observing the spotcovered face of the star—and this is indeed the case here. Further, the star is known to be rotationally active with a reported^{35} periodicity of 17.6 d and amplitude of 10.9 mmag. This far exceeds the depth of Kepler150 f’s transit (~1.5 mmag), indicating that the spotcovered area of the star is much larger than the planet itself and thus large transit distortions can occur. Finally, we show in Methods that a modification to the planetonly model that includes two spot crossings (using a simplified prescription) yields a Δχ^{2} = 9.2 improved fit to the transits versus the planet–moon model, despite using the same number of free parameters. On this basis, we conclude that this is most probably spotdriven activity rather than an exomoon signature.
Finally, we turn to KIC7906827.01. As with the other two, only two transits were available given the long period of P = 737.1 d. The Bayes factor of the planet–moon model against the planet only is 11.9, formally passing our threshold of 10 (strong evidence on the Kass and Raftery scale^{27}). Inspection of the maximumlikelihood moon fit, shown in Fig. 2, reveals that the signal is driven by an unexpected decrease in brightness on the shoulder of preceding the first planetary transit, as well as a corresponding increase in brightness preceding the egress of that same event. The time interval between these two anomalies is approximately equal to the duration of the planetary transit, which is consistent with that expected for an exomoon^{36}. The second transit shows more marginal evidence for a similar effect. The planet–moon model is able to well explain these features, indicative of an exomoon on a fairly compact orbit, to explain the close proximity of the anomalies to the main transit. In a raw χ^{2} sense, the inclusion of the exomoon leads to a Δχ^{2} = 23.2 improved fit, indicating a 4.8σ effect. This does not penalize the model for its extra complexity, but that is accounted for in the previously mentioned Bayes factor calculation of 11.9.
Our first concern was whether these undulations could be a spurious product of the detrending process. Inspection of the individualmethodbased detrendings, rather than the method marginalization, shows that the anomalies are present in all detrendings (Extended Data Fig. 4), and further the planet–moon fit from the methodmarginalized light curve is always a closer match than the planetonly fit (Methods). Thus, the moonlike signal appears robust against detrending choices.
Unlike KIC8682235.01, transit 1’s preingress dip cannot be a starspot crossing, since it occurs before the planet even enters the stellar disk. It is also unlikely to be caused by an unseen contaminant star—this would require such a star to coincidentally undergo a transit at almost precisely the same instant as the unrelated source star (although we investigate this possibility shortly). Additionally, unlike KIC8682235, the two epochs are separated by an integer number of four quarters, from Q8 to Q16, thus placing the star on the same detector module in each quarter, and indeed the same optimal aperture is used. Thus, any difference between the two epochs cannot be caused by a contaminant being present in one epoch but not the other.
Detailed inspection of the pixel light curves shows that the pixels of highest planetary transit signaltonoise ratio (SNR) coincide with the highestflux region, as expected. We also applied this to the pixel location of the moon signature, by evaluating the Δχ^{2} between the planet–moon and planetonly models in each pixel, with local detrending of the pixel light curves and normalization. This test was used for Kepler90 g in 2014, indicating that a hypothesized exomoon was a false positive^{37}, possibly caused by a sudden pixel sensitivity dropout event^{38}. In contrast, we find here (Methods) that the candidate moon’s SNR is collocated with the planetary signal, consistent with a genuine signal (Extended Data Fig. 5).
Analysis of the fluxweighted centroids reveals a small shift of {−0.52 ± 0.06, +0.62 ± 0.05} millipixels in the {X, Y} directions during the two transits of KIC7906827.01. This can sometimes indicate that the transit occurs on a different star than assumed, potentially ruling out KIC7906827.01 as a bona fide planet, but it can also simply occur because of nearby stars within the aperture^{39}. A detailed centroid analysis (Methods) shows that amongst the known nearby stars in the Gaia catalogue only KIC7906827 could plausibly be the host of the transit signal. The shift is indeed broadly consistent with that expected as a result of the known stars, and the estimated blend probability was calculated to be 2.6 × 10^{−6}.
Although the centroids indicate that the signal is a real planet, other information (such as the transit lightcurve shape) can also be used to assess this hypothesis. Accordingly, we used the vespa package^{40} to rigorously calculate a statistical probability of planethood (Methods). From this, we estimate the falsepositive probability (FPP) to be 0.024%, substantially below the 1% threshold typically used to define a ‘validated’ exoplanet^{40}—we thus refer to the planet as Kepler1708 b henceforth.
With Kepler1708 b validated, we return to the exomoon signal. A formal assumption in the lightcurve fits is that the noise is described by an independent normal distribution. Timecorrelated noise would render this assumption invalid and could introduce deviations into the photometry to such a degree that the planet–moon model fits are spuriously favoured—a false positive. The act of detrending the photometry attenuates this possibility, but residual correlated noise could still persist. Although we see no evidence for this (Methods), it cannot be excluded and to some degree will always be present in realworld conditions. We thus performed an injection–recovery exercise, where we injected the planetonly template for Kepler1708 b into the KIC7906827 photometry at random times away from the real events and performed the same battery of tests to see how often we would erroneously claim an exomoon. By using real light curves, any timecorrelated noise structure associated with the source is properly accounted for.
Computational constraints limit us to 200 such fake systems; amongst these injections we find two cases where we would spuriously claim an exomoon (Methods), and thus the FPP for the exomoon signal is \(1.{0}_{1.0}^{+0.7}\)%. If the signal is indeed not from timecorrelated noise, the most likely astrophysical false positive is an unseen second transiting planet, for which we find the probability is ≲1% (Fig. 3).
Discussion
From a survey of 70 cool giant exoplanets, we find no compelling evidence for an exomoon around any, bar one: KIC7906827.01/Kepler1708 b. This candidate is currently uncertain, with an estimated FPP of being an astrophysical signal of ~1% and a ≲1% probability of a previously undetected transiting planet causing such a signal. One detection from a sample of 70 and a 1% FPP naively appears consistent with zero moons, but it is also fully consistent with one real signal, with the actual odds being dependent upon the underlying (and unknown) occurrence rate of large exomoons (Methods). In short, we can find no grounds to reject Kepler1708 bi as an exomoon candidate at this time, but urge both caution and further observations.
Our photodynamical model predicts a planetary mass of <4.6 M_{J} (2σ), corresponding to a predicted radialvelocity amplitude of <98 m s^{−1}. As a faint source Kepler bandpass ((K_{P}) = 15.8), radialvelocity detection would be a major challenge. TTVs are generally expected and could be observed with future transits. Although we only have photodynamically derived upper limits on the planet and satellite masses, we can forecast on the basis of their radii^{41} that the TTV amplitude has a 95% confidence range between 1.2 and 77.0 min. Future observations with the Hubble Space Telescope, James Webb Space Telescope or PLATO could seek these TTVs or repeated moon transits (≃500 ppm).
Kepler1708 bi joins Kepler1625 bi^{42} as another example of an unexpectedly large exomoon candidate—echoing the surprise that hotJupiter discoveries elicited in the mid1990s^{43}. The basic properties are listed in Table 1, and can be summarized as those of a miniNeptune moon orbiting approximately 12 planetary radii around a Jupitersized planet, which itself orbits a Sunlike star at 1.6 au. Compared with Kepler1625 bi, the moon candidate is substantially smaller, on a tighter orbit and more consistent with a coplanar geometry. Although the reality of Kepler1625 bi remains unclear^{44}, the existence of this second candidate challenges us to consider the origins of such large moons.
We first consider the moon’s possible orbital migration from tidal interactions with Kepler1708 b. We evolved a constanttimelag tidal model^{45} using the system parameters from our posterior samples^{46}. The tidal model adopts Jupiterlike parameters for the tidal Love number k_{2J} (ref. ^{47}), moment of inertia^{47} and time lag^{48}. We evolved the models over 10 Gyr (≃99.5% confidence upper limit on stellar age), assuming that the moon forms in situ at twice the Roche limit and that the planet has a initial spin period of 5–10 h. Over this timescale, the moon begins well beyond the corotation radius and thus slowly migrates outwards. Over the full 10 Gyr simulation, the moon migrates to ~20 R_{P}, which is both well within the Hill stability limit (~250 R_{P}) and consistent with our favoured solution of ~12 R_{P}.
The fact that this candidate can plausibly migrate outwards via tides blurs the distinction between formation scenarios, as any model that produces a massive moon on a compact orbit can match the observations. There are several broad scenarios for moon formation: planet–planet collisions, formation of moons within gaseous circumplanetary disks (for example the Galilean moons) or direct capture—either by tidal dissipation or pulldown during the growth of the planet. For a gaseous planet, the first scenario is unlikely to produce a debris disk massive enough to form a moon this large. The moon is also at the extreme end of the mass range produced by primordial disks in the traditional corecollapse picture of giantplanet formation^{49,50,51}, but is easier in the case where planets form by disk instability^{49,52}. Such models also naturally produce moons on lowinclination orbits. Direct capture by tidal dissipation is also possible, although the parameter range for capture without merger is limited. Pulldown capture can produce large moons within ~10 Jupiter radii, with a wide range of inclinations depending on the timescale for planetary growth. Low inclinations such as those observed here argue for a slower envelope growth^{25}.
Together then, the formation and properties of a moon such as this certainly challenge conventional thinking, but plausible mechanisms have been previously proposed. Ultimately, the reality of supermoons such as Kepler1708 bi and Kepler1625 bi will require followup transit photometry, as both their nature and supporting evidence demand appropriate scepticism at this time.
Methods
Target selection
The focus of this work is the population of cool, giant transiting exoplanets observed by Kepler. The most comprehensive catalogue of Kepler transiting planet candidates comes from the NASA Exoplanet Archive (NEA^{53}) and thus we began by downloading this catalogue at the start of this investigation (27 March 2018). Not all Kepler objects of interest in the catalogue are viable planet candidates though, and so we applied a cut to remove any objects that have been dispositioned as likely false positives by the NEA.
Both the terms ‘cool’ and ‘giant’ are somewhat subjective and thus require a clear definition for the purposes of target selection. For giant, we elected to use a cut of \(\hat{{R}_{\mathrm{P}}} > 0.5\) R_{J}, where \(\hat{{R}_{\mathrm{P}}}\) is the most probable radius value listed in the NEA. This choice is motivated to minimize the number of subNeptunes that make it into our sample, and thus focus on Jupitersized worlds.
The definition of cool is again subjective, but here we are primarily interested in planets in environments cooler than that of the Earth. Using a simple instellation or temperature cut alone is inadequate though, as these values depend upon the stellar parameters, which have been subject to substantial revision over time^{54}. On this basis, they may not be reliable in isolation as a means of capturing all of the cool giants. Instead, we apply three different definitions of cool and accept giant planets that satisfy any of the three. These criteria are \(\hat{{S}_{\mathrm{P}}} < 1\) S_{⊕}, \(\hat{{T}_{\mathrm{P}}} < 300\) K or \(\hat{{P}_{\mathrm{P}}} > 400\) d—where T_{P} is the blackbody equilibrium temperature of the planet.
Using these cuts, 48 Kepler objects of interest were identified from the NEA. However, we noted that a subset of these had suspiciously large radii. We thus applied an additional cut to remove any with best reported planetary radii in excess of 2 Jupiter radii (removing KIC3644071.01, KIC6426592.01, KIC6443093.01, KIC9025662.01, KIC9011955.01, KIC8240617.01 and KIC8868364.01). This left us with 41 unique planetary candidates. Of particular note is KIC5437945, which possesses two cool giants associated with a single source.
At this point, we introduce another cut: that at least two transits have been observed by Kepler. Without the two transits, the orbital period cannot be precisely measured and this in turn makes it impossible to measure the eccentricity of the planets photometrically—a test we will depend on later in our exomoon analysis. Of the 41 cool giants from the NEA, 5 were found to only exhibit a single transit in the available Kepler data (KIC2162635.01, KIC3230491.01, KIC3962440.01, KIC11342550.01 and KIC11709124.02) and thus were excluded. This leaves us with 36 cool giants.
Although the NEA is the most complete catalogue available, longperiod planets are more challenging to find than their shorterperiod counterparts, and thus numerous independent studies have identified longperiod exoplanetary candidates that were not present in the NEA. In particular, we identified several additional studies^{13,14,15,16}, which we inspected in an effort to locate any additional possible planets missed thus far. In what follows, we attempt to apply the same filters as before, such as exhibiting at least two transits, but note that in some cases the radius and instellation values had not been computed by the original authors.
From the work of Wang and colleagues^{13}, KIC8012732, KIC9413313 and KIC11465813 were flagged as exhibiting three or four visible transits and have long periods (431 d, 440 d and 671 d) and large radii (9.8 R_{J} and 13.8 R_{J}). KIC5437945 and KIC7619236 also satisfy the criteria but are already included in the NEA catalogue. KIC5652983 is long period and large but has been argued to be a likely false positive^{13} due to the observation of large radialvelocity variations. Amongst the twotransit cases, KIC5732155, KIC6191521 and KIC10255705 are also added, which leads to six new cool giants from this sample.
From the work of Uehara and colleagues^{14}, only KIC10460629 exhibits at least two transits, separated by 525 d. Although the radius is not computed, the grazing, deep (2%) transit is plausibly a giant around a diminutive star and thus was included in what follows.
From the work of ForemanMackey and colleagues^{15}, only three of the candidates have more than two transits: KIC3239945, KIC8410697 and KIC8800954. However, KIC3239945 is already found in our NEA catalogue and KIC8800954 has a radius of 0.39 R_{J}, making it too small for our sample. Accordingly, we only add KIC8410697, of period 1,047 d and 0.70 R_{J}.
From the work of Wheeler and Kipping^{16}, we pick an extra transiter of 3% depth but unreported radius (KIC8508736) with a period of 681 d.
Combining these targets with the NEA sample yielded 45 cool giants.
As our study progressed, spanning multiple years, the possibility of new coolgiant detections appearing in the NEA grew. To address this, we reran our NEA search on 12 June 2019, which identified 24 new cool giants. Of these, six were singletransit systems (KIC2162635, KIC3230491, KIC3644071, KIC3962440, KIC11342550 and KIC11709142) and were thus removed. In addition, upon querying KIC8308347 in the Mikulski Archive for Space Telescopes, we noted that it had been flagged as an ‘eclipsing binary: likely false positive’ under condition flag and thus rejected it in what follows. These new inclusions raise our total number of cool giants to 62.
As a final addition to our catalogue, a recently published study^{17} (although quite far into our own analysis) presented 23 longperiod Kepler planetary candidates. Of these, 14 were suitable for our study and all but one were doubletransit systems. However, three of these were already included in our sample by this point (KIC3756801, KIC9663113 and KIC10460629), meaning that the ref. ^{17} sample added 11 cool giants to our ensemble. Of the new objects, KIC5351250 is of particular note since it represents the fifth planetary candidate in the Kepler150 system^{31}. Together, this brings our final catalogue of cool giants up to 73 planetary candidates. Three of these were found to exhibit unacceptably high correlated noise structure in the light curves and were thus rejected, as described later in this section. The remaining 70 are listed in Supplementary Table 1.
Data preparation
For each target, the lightcurve files were downloaded from the Mikulski Archive for Space Telescopes, using primarily the longcadence data but short cadence where available. However, given the longperiod nature of our transiting bodies, the value of short cadence is considerably less than that of typical transiters^{55}. In all cases, the data were processed as part of the 25th and final data release issued by the Kepler science team^{56}, dubbed DR25 hereafter.
For all light curves, we trimmed any points with an error flag equal to anything other than zero—thus removing points known to be afflicted by effects such as reactionwheel zero crossings^{57}. Additional outliers (for example unidentified cosmicray hits^{58}) were removed independently for the ‘simple aperture photometry’ (SAP) and ‘presearch data conditioning’ (PDC^{59}) light curves, by flagging points more than 3σ deviant from a moving median of bandwidth 20 long cadences.
Kepler light curves exhibit modulations in intensity due to myriad effects. Ultimately, the shortterm modulations corresponding to a transit are of central interest to this study, but longerterm variability is also present and introduces sizable trends that require correction. Such variability could originate from the instrument (for example focus drift^{60}) or the parent star (for example rotational modulations^{61}). In what follows, we describe our approach for detrending these effects.
As a brief aside, we note that shortterm variability on the same timescale as the transits can also be present (for example pulsations in evolved stars^{62}) and is generally much more difficult to remove, since it is not separable in the frequency domain. Consequently, attempts to remove such noise come at grave risk of distorting a transit signal of interest. Given that our primary objective is to look for exomoons, which manifest as small undulations on this timescale, it was considered an unacceptable risk to attempt to remove such shortterm variability—since such efforts may in fact introduce false positives into the time series. Instead, the philosophy in what follows is to use statistical tests to identify light curves corrupted by such noise and simply discard them. This naturally comes at the expense of increasing our falsenegative rate, since such systems are not even analysed further.
For each coolgiant target, we detrend the light curves of the individual transit epochs individually, rather than imposing the idea that the noise in one quarter need be representative of others. This is largely motivated by the fact that the spacecraft rolls every quarter and thus sources appear on different silicon with different optimal apertures, blend contaminations and CCD (chargecoupled device) behaviours. In addition, we adopt the approach of detrending each transit epoch in eight different ways. The reasoning here is that, although we generally consider each of the eight different methods to be fairly accurate (else we would not be using them), we cannot guarantee that any of them are going to work in every situation. From experience, peculiarities in particular light curves can interact with detrending algorithms in unanticipated ways, leading to anything from a complete failure to a subtle residual trend. Fundamentally, any claim we make about the presence of an exomoon needs to be robust against choices made in this detrending stage, and a path to achieving this is to simply use multiple detrending methods and compare.
The details of the different detrending algorithms used are presented shortly, but once in hand they are combined into a single data product (per transit epoch) known as a methodmarginalized light curve^{21}. In this work, we generate such light curves by simply taking the median of the multiple detrended intensities at each time stamp. The formal uncertainty on each photometric data point is also inflated by adding it in quadrature to 1.4286 multiplied by the median absolute deviation between the methods. Median statistics are used throughout to mitigate the influence of failed detrending(s). In this way, we increase the robustness of our light products against detrending choices and also inflate the errors to propagate the uncertainty in the detrending procedure itself.
As an additional safeguard against poorly detrended light curves, we compute two lightcurve statistics to measure their Gaussianity. If any of the eight light curves fail this test, they are rejected before the methodmarginalization procedure. For the first test, we bin the light curves (after removing the transits) into ever larger bins and compute the s.d. versus bin size, against which we then fit a linear slope in log–log space. For such a plot, the slope should be minus onehalf, reflecting the behaviour of Poisson counting of independent measures. However, timecorrelated noise structure will lead to a shallower slope that can be used to flag such problematic sources^{63}. We thus generate 1,000 light curves of precisely the same time sampling and pure Gaussian noise and measure their slopes in this way. This allows us to construct a distribution of expected slope values. If the real slope deviates from the Monte Carlo experiments with a P value exceeding 2σ, the light curve is flagged as nonGaussian.
For the second test, we compute the Durbin–Watson^{64} statistic of the unbinned light curves (after removing the transits). This is essentially a test for autocorrelation at the timescale of the data’s cadence, where uncorrelated time series should yield a score of 2. As before, we test for nonGaussian cases by generating 1,000 fake Gaussian light curves at the same time sampling and scoring their Durbin–Watson metrics. If the real light curve is deviant from this distribution by more than 2σ, the light curve is rejected.
The above describes how we combine eight light curves detrended independently, but we have yet to describe how these eight light curves are generated in the first place—to which we turn in what follows. In total, four different detrending algorithms are used, which are then applied to the SAP and PDC data to give eight light curves. The four algorithms are described now.
CoFiAM. Cosine Filtering with Autocorrelation Minimization (CoFiAM) builds upon the cosine filtering approach previously developed for CoRoT^{65} data. Cosine filtering is attractive because it behaves in a predictable manner in the frequency domain, unlike the other methods used here, which leak power across frequency space. Fourier decomposition of the transit morphology reveals dominant power at the timescale of the transit duration and higher frequencies^{66}. Thus, by only removing frequencies substantially lower than this, we can ensure that the morphology of the transit is not distorted by the detrending process itself. On the other hand, cosine filtering is problematic in that we could regress a very large number of cosines to the data. Much like fitting highorder polynomials, predictions from such model become unstable at high order. In our case, we train on the outoftransit data (in fact the entire quarter) and interpolate the model into the transit window, thus introducing the possibility of highorder instabilities here.
This is where our implementation deviates from that used for CoRoT^{65}, to account for this effect. We detrend the light curve in up to 30 different ways, in each case choosing a different number of cosine components to include. The simplest model is a single cosine of frequency given by twice the baseline of available observations (thus looking like a quadratic trend)—known as the basic frequency. At each step, we add another cosine term of higher frequency to the function (equal to a harmonic of the basic frequency), train the updated model, detrend the light curve and compute statistics concerning the quality of the detrending. We continue up to 30 harmonics, or until we hit 1.5 times the reported transit duration. From the 30 options, we pick the one that leads to the most uncorrelated light curve—as measured from the Durbin–Watson statistic evaluated on the data surrounding (but not including) the transit (specifically to within six transit durations either side). These local data are then exported with the data further away from transit trimmed at this point. We direct the reader to our previous work^{67} for more details of this approach, including the underlying formulae used.
PolyAM. Polynomial Detrending with Autocorrelation Minimization (PolyAM) is similar to the above except that the basis function is changed from a series of harmonic cosines to polynomials. As before 30 different possible maximum polynomial orders are attempted from 1st to 30th order, and as before for each epoch the least autocorrelated light curve is selected as the accepted detrending on a transitbytransit basis.
local. The next approach again uses polynomials, and again up to 30th order, but this time the final accepted polynomial order is that which leads to the lowest Bayesian information criterion (BIC)^{68} as computed on the data directly surrounding the transit (specifically to within six transit durations). This is arguably the simplest of the four algorithms attempted and is a fairly typical strategy in the analysis of shortperiod transiters^{69}.
GP. Finally, we implemented a Gaussian process (GP) regression to the light curve. As with all of the methods above, the transits are masked during the regression by using the best available ephemeris. We implemented the regression using a squared exponential kernel where the hyperparameters (for example length scale) are optimized for each epoch independently. For consistency, we only export the data that is within six transit durations of the transit, although technically the entire segment (±0.5 orbital periods of each transit) is detrended.
As a final note, recall that during the methodmarginalization process we perform checks to identify detrended light curves that do not conform to Gaussian behaviour. If all eight detrendings of a given epoch fail these tests, then there will be no accepted light curves to combine and thus the epoch is dropped. In some cases, this can reduce the number of available transits (after detrending) to fewer than two—thereby making it fail our basic criteria of presenting two epochs or more. We found that this happened for three objects in our sample, KIC10255705, KIC11513366 and KIC6309307. This removal of these three targets reduces our sample size from 73 to 70 (which are the ones listed in Supplementary Table 1).
Isochrone analysis
The 70 transiting planet candidates are associated with distinct stars from one another, with the exception of one pair associated with KIC5437945, leading to 69 unique stars. To derive physical dimensions for the planetary candidates, it is necessary to first derive stellar parameters. This is accomplished using an isochrone analysis, which compares observable quantities associated with a star against a grid of stellar models, assuming different masses, radii, ages and so on. In this way, bestmatching solutions can be inferred in a Bayesian framework to derive posterior distributions for the stellar properties.
Given that our stars are broadly FGK type, we elected to use the Dartmouth stellar isochrone models^{70} to describe these stars. For each target, we took the Gaia DR2 parallax^{71}, the Kepler bandpass apparent magnitude, and the stellar atmosphere properties reported in the Kepler DR25 catalogue^{54}, and appended them to a star.ini file along with their associated errors. These were then fed into the isochrones package^{72} to obtain a posteriori fundamental stellar parameters, including the mean density of the host star (ρ_{⋆}). These fundamental parameters are reported in Supplementary Table 2 and were used later in our analysis for deriving planet/moon radii/masses.
Due to the particular interest of the target KIC7906827, we updated our isochrone analysis to include the Gaia DR3 parallax when it became available (reducing the parallax uncertainty by 25%). We also elected to use the stellar atmosphere properties from the transit detection work^{17} (\({T}_{{{{\rm{eff}}}}}=6{,}15{7}_{202}^{+231}\) K, \({{\mathrm{log}}}\,g=4.3{7}_{0.05}^{+0.04}\), Fe/H \(=0.{0}_{0.2}^{+0.2}\)) rather than the DR25 catalogue^{54} (T_{eff} = 5,977 ± 176 K, log g = 4.39 ± 0.12, Fe/H = −0.08 ± 0.26), although we note that these values are clearly very similar. The system parameters listed in Table 1 correspond to these revised choices, for which the associated fundamental stellar parameters are M_{⋆} = 1.088 ± 0.072 M_{⊙}, R_{⋆} = 1.117 ± 0.064 R_{⊙}, log_{10}[A (yr)] = 9.50 ± 0.31, log_{10}[L_{⋆} (L_{☉})] = 0.182 ± 0.082, d = 1,712 ± 75 pc and log_{10}[ρ_{⋆} (g cm^{−3})] = 0.042 ± 0.065.
We note that these are not the same fundamental stellar parameters for KIC7906827 as listed in Supplementary Table 2, which originate from the original Kepler DR25 and Gaia DR2 inputs. Once again though, we note that there is very little difference between the two, with M_{⋆} = 1.056 ± 0.067 M_{⊙}, R_{⋆} = 1.098 ± 0.095 R_{⊙}, log_{10}[A (yr)] = 9.61 ± 0.33, log_{10}[L_{⋆} (L_{☉})] = 0.140 ± 0.087, d = 1,750 ± 100 pc and log_{10}[ρ_{⋆} (g cm^{−3})] = 0.05 ± 0.11. As a final point of comparison, both sets of values are in good agreement with the independent analysis (using Gaia DR2) by Berger and colleagues^{73}, who find \({M}_{\star }=1.06{1}_{0.079}^{+0.073}\) M_{⊙}, \({R}_{\star }=1.14{1}_{0.066}^{+0.073}\) R_{⊙}, log_{10}[L_{⋆} (L_{☉})] = 0.140 ± 0.087 and d = 1,640 ± 100 pc.
Lightcurve fits
For planets exhibiting three or more transits, at least three different lightcurve models, or hypotheses, were proposed to explain the data. The first is model \({{{\mathcal{P}}}}\), which represents the null hypothesis of a transiting planet orbiting its star on a strictly Keplerian orbit. In this case, the Mandel–Agol^{74} lightcurve algorithm is used. The second hypothesis, model \({{{\mathcal{T}}}}\), expands upon the first by adding TTVs. This is formally accounted for using same algorithm again but allowing each transit epoch to have a unique time of transit minimum, τ_{i}. The third model considered is that of a planet–moon system, \({{{\mathcal{M}}}}\), generated using the LUNA photodynamic algorithm^{36}. For planets exhibiting just two transits, TTVs cannot be distinguished from a linear ephemeris and thus model \({{{\mathcal{T}}}}\) was not used.
In each model, the limb darkening of the star is modelled with a quadratic limb darkening law using the q_{1}–q_{2} reparameterization^{75}. Since the majority of light curves are long cadence, the potentially compelling lightcurve smearing effect is accounted for by employing the numerical resampling method^{55} (with N_{resamp.} = 30). Finally, contaminated light from nearby sources is tabulated in the Kepler fits files as ‘CROWDSAP’ and this value is used in a blend correction to each quarter’s light curve using a previously published method^{76}. We also note that the models formally assume circular orbits, although elliptical planets are almost perfectly described by these models too^{77}, with the exception that the fitted stellar density will be skewed away from the true value^{78}. Exomoon orbits are also treated as circular, which is justified on the basis of the expected rapid circularization timescales^{79}.
Regressions were executed using the multimodal nested sampling algorithm MultiNest^{80} with 4,000 live points. The advantage of using MultiNest over conventional Markov chain Monte Carlo (MCMC) methods is the ability to sample disparate modes and efficiently evaluate the marginal likelihood of the proposed hypotheses, which is used later in Bayesian model selection.
For model \({{{\mathcal{P}}}}\), seven parameters fully describe the lightcurve model and thus are the free parameters in these fits. These are (1) P, (2) τ, (3) p, the ratio of radii between the planet and the star, (4) b, (5) ρ_{⋆}, (6) q_{1}, the first limbdarkening coefficient, and (7) q_{2}, the second limbdarkening coefficient. Uniform priors are adopted for all except the lightcurvederived stellar density (under the assumption of a circular orbit), ρ_{⋆,circ}, for which we use a loguniform prior between 10^{−3} g cm^{−3} and 10^{3} g cm^{−3}.
For model \({{{\mathcal{T}}}}\), we have 5 + N parameters, where N is the number of available transit epochs. The first five terms are the same as those of model \({{{\mathcal{P}}}}\) except for P and τ. The extra N terms are the individual times of transit minimum for each epoch.
Finally, for model \({{{\mathcal{M}}}}\) we have 14 free parameters. The first seven are simply the same as for model \({{{\mathcal{P}}}}\) but the last seven describe the exomoon. Specifically, these are (1) P_{S}, (2) a_{SP}/R_{P}, (3) R_{SP}, the ratio of radii between the satellite and the planet, (4) M_{SP}, the ratio of masses between the satellite and the planet, (5) ϕ_{S}, the orbital phase of the satellite at the instant of planet–star inferior conjunction during the reference epoch, (6) cos(i_{S}) and (7) Ω_{S}. As before, uniform priors are adopted for all with the exception of P_{S}, which uses a loguniform prior from 75 min to the period corresponding to one Hill radius. The semimajor axis of the satellite has a uniform prior from 2 to 100 planetary radii.
For all models, a normal likelihood function is adopted. The only addition made to this is that we applied a likelihood penalty to model \({{{\mathcal{M}}}}\), which explored unphysical parameter combinations. Specifically, we calculate the satellite and planet density using previously published expressions^{81} and reject any samples for which ρ_{S} > 20 g cm^{−3} or ρ_{P} > 150 g cm^{−3} or ρ_{P} < 0.5 g cm^{−3}, in an effort to keep the sampler in the region of physically plausible solutions. Additionally, solutions where the satellite period exceeds 93.09% of the Hill sphere are unstable even for retrograde orbits^{28}, and are thus rejected.
Initial checks for exomoon candidacy
The primary objective of this work is to search for new possible exomoon candidates amongst Kepler’s coolgiant sample. One of the first observable effects predicted for exomoons originates from TTVs imparted to the planet by the moon’s gravitational influence^{7}. Thus, a basic criterion one might suggest is that TTVs should be present. However, for 25 of our targets only two transits were available and thus TTVs cannot be inferred. For the remainder, we apply a statistical test for TTVs as described later.
The other observational consequence of an exomoon is that its shadow can eclipse either the star or planet (that is, a syzygy), leading to additional changes in flux on top of the conventional transit signature^{36}. These changes can occur in or out of transit and impart complex shapes. Furthermore, the limited number of transits available in our sample means that stacking approaches^{82,83} will not be statistically valid. However, our photodynamical planet–moon model (model \({{{\mathcal{M}}}}\)) computed using LUNA does fully account for the moon’s subtle influence on the light curve. Since MultiNest provides marginal likelihoods, we can evaluate the Bayes factor between models \({{{\mathcal{P}}}}\) and \({{{\mathcal{M}}}}\), while correctly penalizing the moon model for its greater complexity, to determine the statistical evidence for a moon. We thus demand that the Bayes factor formally favours the planet–moon model over the planet model to be considered further.
Finally, we require that the planet has an orbit that is consistent with a circular path. Elliptical orbits can be produced through planet–planet scattering^{84}, which is expected to strip exomoons^{29}. Even if the eccentricity is produced through some other effect, the dynamical region of stability is severely truncated by nonzero eccentricity^{28}. Thus, although an elliptical orbit does not prohibit exomoons, we consider it a priori improbable and thus reject any planets exhibiting eccentric orbits.
If these 2(+1) criteria are satisfied, the object is promoted for further checks, which we refer to as secondary tests (discussed in the next subsection). We describe the details of the initial tests in the following paragraphs and highlight that the results are listed in Supplementary Table 1.
For the eccentricity test, we require some formal criterion to evaluate if a planet has an eccentric orbit or not. Since we assume a circular orbit in all of our lightcurve models, the derived mean stellar density will be offset from the true value if the orbit is in fact eccentric^{85}. If we have an independent and unbiased measure of the mean stellar density in hand, this offset can be detected and thus used to constrain the orbital eccentricity^{86}. Again, the philosophy here is to minimize the exomoon falsepositive rate at the expense of the falsenegative rate.
Our eccentricity test thus begins by taking the a posteriori parameter samples from either model \({{{\mathcal{P}}}}\) or \({{{\mathcal{T}}}}\)—specifically, we default to \({{{\mathcal{P}}}}\) unless we conclude the system is ‘TTV hot’ as defined by our TTV test described later. Naturally, for twotransit planets we always use model \({{{\mathcal{P}}}}\).
Next, we need an independent measure of the true stellar density and here this originates from an isochrone analysis. This is described in a dedicated section later and results are summarized in Supplementary Table 2.
To determine an eccentricity posterior for each planet, we begin with the asterodensity profiling relationship^{85}, which relates ρ_{⋆,circ} to the true value, ρ_{⋆}:
where
Since ρ_{⋆,circ} and ρ_{⋆} are inferred independently, we construct a Ψ posterior by simply drawing random samples from our lightcurvederived density and dividing them by random samples from the isochrone density. This Ψ posterior sadly does not trivially lead to an eccentricity posterior because of the joint dependence on ω, the argument of periastron. Thus, we need to again sample the parameter space. To achieve this, we used kernel density estimation (KDE) on the log Ψ posterior with a Gaussian kernel and a bandwidth optimized for using leastsquares crossvalidation. The KDE distribution was then used as a loglikelihood function for the purposes of an MCMC exploration in {e, ω} parameter space.
Since transiting planets are more likely to be eccentric, a priori, as a result of geometric bias^{87,88}, it is necessary to account for this selection bias during the inference. This in turn requires a prior for the eccentricity distribution, which cannot be strictly uniform to avoid infinities^{89}. We thus assume that Pr(e), the prior on eccentricity, is a beta distribution with shape parameters α = 1 and β = 3, broadly matching the longperiod radial velocity population^{90}. The selection effect inherent to the transit method is then accounted for using the joint prior, Pr(e, ω∣transiting) as derived for eccentric planets^{89}.
We then sampled the {e, ω} parameter volume 110,000 times, burning out the first 10,000 steps. Note that MCMC sampling suffers from biases at boundary conditions, such as e > 0, and this can lead to an artificial positive skew in eccentricity^{91}. This can be overcome by reparameterizing^{92} to √e sin ω and √e cos ω, which we use here. Once the eccentricity posterior has been evaluated, we next perform Bayesian model selection by evaluating the Savage–Dickey ratio^{93}. This simply evaluates the posterior density at e = 0 versus the prior, where the ratio provides a direct estimate of the Bayes factor of an eccentric versus circular orbit (in the case of nested models such as here). In our case, any instance where the posterior density is less than the prior at e = 0 is hereby labelled as ‘eccentric’, otherwise ‘circular’. The prior density is analytic and thus trivial to evaluate at zero^{89} but for the posterior density we apply a KDE to the posterior to evaluate the density at zero. Because of the boundary condition at e = 0, we mirror the posterior samples around zero and combine them with the originals, and then apply a Gaussian KDE to the combined sample. The density at zero is then equal to twice the density of this KDE at zero, as a result of the doubling of the sample volume.
Thus far, the eccentricity test described above has been applied to either the planetonly or planetwithTTVs lightcurve model, depending on whether we classified the planet as TTV hot (see next paragraphs). However, we also repeated this a second time applied to the planet–moon posteriors from model \({{{\mathcal{M}}}}\). If the planet appears incompatible with a circular orbit only after the moon component is introduced, we mark this with the ✘^{†} symbol in Supplementary Table 1 and the object is not considered further as a viable moon candidate. Such cases essentially mean that the required moon solution demands a lightcurve shape that is inconsistent with the derived stellar density unless eccentricity or blending is introduced^{94}.
We emphasize that transit planets preferring eccentric orbit solutions are identified via the existence of a ‘photoeccentric effect’, which describes an apparent tension between the lightcurvederived stellar density and an independently inferred value^{86}. However, blends and starspots can also cause substantial tension, and both would lead to an elevated risk of exomoon false positives, motivating their exclusion. Finally, although we exclude these systems from this study, that does not mean they are necessarily devoid of moons, any more than hot Jupiters are necessarily devoid of moons. However, in both cases, physical arguments suggest that they are not the most suitable environment. Therefore, although we elect to avoid such systems in this study, efforts by other teams to survey such objects are by no means futile and we encourage such work.
For the TTVs, as noted earlier, 25 of our targets have only two transits available and thus cannot be tested. This is because TTVs are defined as an excursion from a linear ephemeris fit, but a linear ephemeris model (governed by two free parameters) will always provide a perfect fit to two arbitrary transit times (two data points). For the other cases, we can search for TTVs as an indication of an exomoon, as well as providing some novel insights about the propensity of cool giants to exhibit TTVs more broadly.
Testing for TTVs through periodogram searches is impractical for the vast majority of our sample. This is because 51/72 of our planets have three transits or fewer and thus will offer just three data points for a regression. For a sinusoidal TTV, the simplest periodic function, five unknown parameters describe the ephemeris (the period and reference time of transit minimum, as well as three sinusoid parameters—period, phase, amplitude). Even in a gridsearch periodogram, which removes one parameter, TTV period, we still have fewer data than free parameters. Note that if we possess four data points the system becomes constrained but fits are typically ‘perfect’, although in such cases we can apply regularization techniques on the amplitude term to make progress, as has been done, for example, for Kepler1625 b^{95}.
Instead of trying to seek a periodic TTV, we simply ask whether there is evidence for a TTV. To this end, we follow earlier work^{96} and apply their first test that addressed this question. This takes the maximumlikelihood lightcurve fits of models \({{{\mathcal{P}}}}\) and \({{{\mathcal{T}}}}\) and compares their loglikelihood through a BIC evaluation^{68}. By working with the light curves directly, rather than derived products such as marginalized transit times, we are able to extract as much information from the light curve as possible. Any planet with a BIC preference for model \({{{\mathcal{T}}}}\) is labelled as TTV hot, else TTV cold, unless only two transits exist, in which case we use ‘TTV grey’.
Secondary checks for exomoon candidacy
If a planet passes the basic checks described in the last section, we apply additional checks to evaluate the plausibility of an exomoon. In total, 11 of the 70 cool giants satisfy this criterion. First, we require that the planet’s eccentricity, as determined from model \({{{\mathcal{M}}}}\), also favours a circular path. Following the same method as described in the last section, we find that all 11 indeed appear consistent with circular after applying this test.
Next, we regressed a new moon model to the data, model \({{{\mathcal{X}}}}\), which is identical to model \({{{\mathcal{M}}}}\), except that negative and zeroradius moons are permitted. Negative radii correspond to inverted transits and are simply implemented by flipping the signals. Zeroradius moons are formally forbidden in model \({{{\mathcal{M}}}}\) since we impose the density constraint that ρ_{S} < 20 g cm^{−3} and a zeroradius moon has infinite density. Thus, to enable this we relax this condition by simply commenting out this check in our code. Using the posteriors of model \({{{\mathcal{X}}}}\), we apply three statistical additional tests to the 11 objects.
The first of these, which could be labelled test 4 by this point, is that we computed a Savage–Dickey ratio at the location of M_{S}/M_{P} = 0 to evaluate the statistical evidence in favour of a nonzero exomoon mass. If the system had three or more transits, we imposed the constraint that the Bayes factor from this calculation must exceed 10 in favour of a finite mass (that is, strong evidence^{27}). Next, test 5, we computed a Savage–Dickey ratio at the location of R_{S}/R_{P} = 0 and demanded that, for all objects, the Bayes factor preference for a nonzero radius exceeds 10. Finally, test 6, we counted up how many of the R_{S}/R_{P} samples were negative versus positive and demanded that the positive:negative ratio exceeded 5. This final test catches the possibility that R_{S}/R_{P} is offset from zero but has substantial weight in the unphysical negativeradius regime.
After applying these cuts, three objects emerged as possible candidates: KIC8681125, KIC7906827 and KIC5351250 (aka Kepler150).
Vetting of KIC8681125.01
Advanced vetting of the KIC8681125.01 planetary moon candidate begins by visual inspection of the transit lightcurve fits to better understand what type of moon signal is seemingly detected. As shown in Extended Data Fig. 2, the signal is remarkable for featuring no clear moonlike transit. Instead, the main difference observed is a transit depth change from \(3{,}59{0}_{130}^{+160}\) ppm to \(3{,}03{0}_{110}^{+140}\) ppm. This is explained by the moon model by placing the moon transit on top of the planetary transit in the first epoch, but then the moon avoids transiting the star altogether in the next epoch.
This situation was immediately suspicious and appeared somewhat convoluted and finetuned, particularly when we compare it with typical planet–moon models generated in simulation work^{36}. One possibility is that a nearby contaminant source is more prominently included within the aperture of the second epoch than the first, thus diluting the second’s transit depth. However, if the source landed on the same silicon with the same aperture used each time, this would clearly be excluded as a possibility.
To investigate this, we used the Kepler target pixel files to inspect the photometry at the pixel level. Since the first epoch occurs in quarter 10, but the second in quarter 16, the spacecraft has rolled into a distinct position between the epochs (every four quarters it returns to the same position). As a result, the source is on different silicon between the two epochs. However, KIC8681125 is located near the centre of the entire detector array, within module 13, and thus ends up remaining within this module even after the roll, since the roll is itself uses an axis with an origin close to the centre of the detector array. Despite this, it does indeed end up on different silicon moving, from quadrant 4 to quadrant 2 between the two epochs.
The optimal aperture used by the Kepler pipeline is also quite distinct between the epochs, as shown in Supplementary Fig. 1. Epoch 1 has a simple 2 × 2 square pixel centred on the source, but epoch 2 uses a ‘+’ shaped aperture with an extra pixel included in one corner. In total, six pixels are used in the second aperture, thus increasing the chance of a contaminant falling within the aperture. On this basis, we consider the hypothesis of a contaminant driving the depth change as being highly plausible.
To investigate further, we fitted the light curve with a model that was identical to the planetonly model except for the fact that the second epoch had a unique blend factor associated with it, γ. The maximum likelihood of this fit did not exceed the moon model, but it led to a major Δχ^{2} = 50 improvement over the planetonly model. Since the model only requires one extra parameter over the planetonly model, whereas the planet–moon model needs seven, the blend model outperforms the moon model in terms of the marginal likelihood. As a result, it is formally the preferred model by a Bayes factor of 6.8.
While the blend hypothesis seems to naturally resolve this system, we highlight that problems still remain with this idea. Unfortunately, no highresolution imaging has been previously obtained, but Gaia can resolve sources more than 1–2 arcsec away. The closest source (id 2127184090671914880) is 11.8 arcsec away and 1.7 mag fainter. Given the pixel scale of Kepler of 4.0 arcsec, this is probably too far away to explain the relatively large depth change, as well being somewhat fainter than expected to explain the depth change. Another possibility is that an unseen source resides closer, within approximately 1 arcsec of the source, evading Gaia. However, this is also not satisfactory, as the contaminant should then be sufficiently close as to be included in both epoch apertures. The contaminant hypothesis is thus challenged by the lack of an obvious known source.
We also considered the possibility that the star may be covered in spots, and between the two epochs the spot coverage varies to manifest the depth change. However, high spot coverage appears incompatible with the Kepler photometry, which is relatively flat. To explore this, we ran a Lomb–Scargle periodogram on each quarter and found that the amplitude is consistently below 200 ppm (Supplementary Fig. 2).
Other possibilities still remain, such as uncorrected straylight video crosstalk, for example, but it will be difficult to make further progress in the absence of highresolution imaging, which we encourage at this time. However, given our generally conservative approach of seeking reasons to reject moon candidates rather than keep them, sufficient reason for scepticism exists about this object that we do not consider it further as an exomoon candidate.
Vetting of KIC5351250.06
In vetting the planetary moon candidate of KIC5351250.06/Kepler150 f, we begin by noting that the star is unusually active amongst the sample considered. This is apparent from simple inspection of the light curves but also it has been previously reported^{35} as a rotationally active star with a periodicity of 17.6 d and an amplitude of 10.9 mmag (approximately 1%). Since the transit depth of Kepler150 f is ~1.5 mmag, this implies that the area of the stellar surface covered by spots is larger than the skyprojected area of the planetary disk. Accordingly, it is quite possible for the planet to cross over one or more spots during the transit and induce upward flux undulations^{34} that mimic the signature of star–planet–moon syzygies^{36}.
If the spots are much colder than the photosphere, then the spot crossings can be up to the entire transit depth. In practice, this is somewhat rare for even the most active stars^{97}, requiring both a very cold spot and a perfect alignment of the spot and planetary transit chord^{98}. On this basis, we proceeded with caution given the enhanced possibility of false positives.
To investigate further, we ran a Lomb–Scargle periodogram of the PDC Kepler data, quarter by quarter. As shown in Supplementary Fig. 3, we confirm the ~1% level activity reported previously^{35} and note that the activity seems greater in Q12 (corresponding to the second transit epoch of Kepler150 f) versus Q5 (the first epoch). This indicates that spots are more likely to corrupt the second transit than the first.
Inspection of the transit light curve itself, shown in Extended Data Fig. 3, reveals an apparent transit depth change from epoch 1 to 2, going from \(1{,}35{0}_{190}^{+260}\) ppm to \(1{,}10{0}_{100}^{+90}\) ppm. Closer inspection reveals that the trough of the second transit is not uniformly higher, but rather bounces up and down sporadically—consistent with the behaviour expected for spot crossings^{98}. Given that this transit coincides with an episode of high activity, this begins to cast doubt on the reality of the exomoon signal.
To go further, we fitted just the first epoch in isolation with a planetonly model and then used its maximumlikelihood solution as a template for adding starspots for the second transit. If the planet is passing over a spotty, dark patch—as we hypothesize—then the transit will also be diluted in depth because it is only now blocking out a relatively dim region of the star’s total intensity^{98}. Thus, the second transit is modified in two ways: (1) the addition of a dilution factor, γ, and (2) the inclusion of N spotcrossing events. Since we are not particularly interested in the properties of the spots themselves, just whether they can fit the light curve better than a moon, we adopt a simple heuristic model for the crossings. Specifically, we add on a Gaussian of width σ, amplitude A and central time \({\mathbb{T}}\), thus meaning we have three parameters per spot.
In total, we regressed four different versions of this model to the second epoch: (1) no spot crossings but a contamination factor (one extra parameter), (2) one spot crossing and the contamination factor (four extra parameters), (3) two spot crossings and the contamination factor (seven extra parameters) and (4) three spot crossings and the contamination factor (ten extra parameters). Since the planetonly model has seven native parameters, the final model includes 17 variables altogether. The results of these fits are shown in Extended Data Fig. 3, along with the fits from the planetonly and planet–moon models.
For the planetonly and planet–moon models, we have been thus far comparing models using the Bayesian evidence. However, here, we seek an alternative model selection method. To see why, consider that in the cases of the planet–moon and planetonly models the model parameters are have physical meaning and thus have well defined parameter limits. For example, the moon’s orbital period is bounded by the inner Roche limit and the outer Hill sphere. In contrast, our heuristic model has no clear bounds on the parameters of interest. Thus, we could just increase the widths of the priors somewhat arbitrarily, which would then dilute the Bayesian evidences. Accordingly, the model selection results become highly subjective when using marginal likelihoods for heuristic models, and we instead prefer to use a model selection metric that compares the maximumlikelihood solutions, for which there is no sensitivity to prior widths.
The two most commonly used maximumlikelihood model comparison metrics are the BIC^{68} and the Akaike information criterion, or AIC^{99}. The AIC—motivated from information theory—is more appropriate when none of the models are considered truly correct, but we are ranking them in terms of their ability to approximate the truth, which is certainly true for heuristic models. Further, the BIC includes a penalty term, which depends on the number of data points, and this introduces a degree of subjectivity into the model selection process since it depends on how much we window the data around each transit midpoint. For these reasons, we used the AIC to rank these different models.
In doing so, we found that the twospot model is favoured with AIC improvements versus model (1) of 2.6, 8.0 and 4.9 for models (2) to (4) respectively. For the twospot model, the χ^{2} score when computed on both epochs is 702.89, whereas the planet–moon model achieved 712.07. In other words, the twospot model is a better match to the light curve than the planet–moon model by Δχ^{2} = 9.2, despite using the same number of free parameters.
At this point, we could go further and introduce astrophysical spot models, coupled to the rotational modulations, but for the purposes of this work—seeking exomoons—this is simply beyond the scope of our objectives. Although we cannot fully reject the hypothesis of an exomoon, for the reasons described there is now sufficient basis to reject this particular candidate as a compelling object.
Robustness of KIC7906827.01’s moon signature against detrending choices
A possible concern with any claimed moonlike signal is that it is sensitive to the choices of detrending method used to process the data. In this work, we use the methodmarginalized light curves, computed as described earlier, for the model comparison tests. Since this uses the median of eight different lightcurve detrendings, it is possible that the signal is present in the majority of these, but not all. This does not necessarily indicate that the moonlike signal is spurious, but it would certainly motivate a deeper investigation as to why this is happening and increases the possibility of a spurious origin.
We therefore decided to inspect the individual detrendings for evidence that the signature of the exomoon candidate was not a global feature. This is complicated by the fact that the moonlike signal is not a single event, but rather presents itself in both transits through subtle distortions. Although a visual inspection of the light curve reveals broadly consistent morphologies across all methods (Extended Data Fig. 4), we sought a more quantitative metric to assess this.
To this end, we took the maximum a posteriori fit of the planet–moon model conditioned upon the methodmarginalized light curve as a template, and compared it with each of the eight detrended light curves. For reference, we also took the maximum a posteriori planetonly fit. Crucially, we do not refit any of these eight light curves; we simply ask how well these templates agree with the data in hand. In every case, we find that the planet–moon model yields superior agreement, indicating that the specific signature of the hypothesized moon (and not some generic moon) is present in all detrendings. Furthermore, the Δχ^{2} values obtained are consistent with the value obtained from the methodmarginalized light curve (Δχ^{2} = 23.2), yielding 22.2, 27.1, 23.4, 25.0, 23.9, 31.4, 23.8 and 15.0. This list has a median of 23.9, and a mean of 24.0 ± 4.6—consistent with the value obtained from the methodmarginalized light curve.
On this basis, we conclude that the moonlike signature is robust against choice of detrending method.
Pixellevel analysis of KIC7906827.01
We analysed the pixellevel data of KIC7906827 to look for anything out of the ordinary that might suggest that the moonlike signal is spurious. To this end, we largely follow the approach outlined in a previous work^{37}, where a putative exomoon around Kepler90 g was shown to be a likely false positive. This also builds upon the tests already shown for KIC8681125.01 discussed previously.
We begin by extracting the individual raw light curves of each pixel within the postage stamp of the target and for times directly surrounding the two transits of KIC7906827.01. Specifically, we extracted light curves of ±2.5 transit durations around the two known events. Each light curve was then detrended using the local method described earlier.
Next, we measure the planet SNR in each pixel by simply calculating the weighted mean of the detrended pixel light curves inside/outside the transit region (where we use the duration as determined from the full planetonly fits found earlier). The s.d. values (divided by the square root of the number of data points in each section) are used to compute an error (through quadrature), which then forms the SNR. The result is illustrated in the middle panel of Extended Data Fig. 5. In comparing with the mean flux counts of each pixel (shown in the lefthand panel of Extended Data Fig. 5), we see good agreement between the location of the highest flux and the location of the highest transit SNR. The planetary transit thus shows no sign of being dislocated from the target or any other strange pixel behaviour.
Turning now to the moonlike signal, we seek to replicate the SNR test, but this is challenged by the fact that the moon signature is not a simple box but rather displays features across the light curve, and in different positions in each transit. The SNR can instead be measured by asking, in each pixel, how much better the maximum a posteriori planet–moon lightcurve model template is versus that of the planetonly model. Here, ‘template’ refers to the solution obtained by regressing to the methodmarginalized light curves. To quantify what we mean by ‘better’, we evaluate the Δχ^{2} between the two templates, such that positive numbers indicate that the planet–moon model leads to improved agreement.
As the moonlike signature inherently has much lower SNR than the planetary signal, the SNR map is correspondingly noisier, but it clearly shows a concentration of the SNR on top of the target, as expected for a genuine signal. We highlight that it is precisely this point that the moon candidate of Kepler90 g failed to pass^{37}. On this basis, we find no evidence in the pixellevel data to suspect that the moonlike signature (1) is associated with a contaminating offset source, (2) is caused by a global dimming of the detector postage stamp pixels (for example due to stray light) or (3) is caused by a single pixel triggering a false positive through anomalous behaviour.
Centroid analysis of KIC7906827.01
From the KIC7906827 fits files, we extracted the fluxweighted centroid columns and inspected the timeseries behaviour of the X and Y positions within the vicinity of the two transit epochs of KIC7906827.01. Masking the transits themselves, and filtering on only data within six transit durations of the eclipses, we fitted a series of polynomials through the centroids of increasing complexity. Scoring with the BIC^{68}, we identified the most favourable model for each transit in both X and Y and used this to remove the longterm trend caused by pointing drift.
We then evaluated the mean position in and out of the transit event, using the s.d. to estimate uncertainty, to find that the centroids exhibit a {−0.52 ± 0.06, +0.62 ± 0.05} millipixel shift in the {X, Y} directions (Supplementary Fig. 4). Given the presence of nearby stars observed by Gaia, a centroid shift of some kind is not surprising but it can also indicate that the transit is not associated with the target^{39}—which would open the door to KIC7906827.01 being a falsepositive planet.
To investigate the possibility that one of the other known stars was in fact the host, we created and modelled difference images for the highSNR transit events in quarters 8 and 16 for KIC7906827. The results of this very strongly show that the observed transit signal cannot be due to any stars in the Gaia catalogue except the target star, KIC7906827.
We created the difference image as described in previous work^{39}. Assuming that all flux change is due to the transit event, the difference image will show a starlike image at the location of the transit signal source. For each quarter, cadences were chosen in the transit event and the pixel values were averaged over these cadences, creating an average intransit image. The same number of cadences was chosen on both sides of the transit event, and averaged to create an average outoftransit image. These observed images are compared in Supplementary Figs. 5 and 6. The similarity between the outoftransit and difference images very strongly indicates that KIC7906827 is the source of the transit.
Even greater confidence in this arrives via modelling of the point response function (PRF). We modelled the scene using the Kepler PRF and stars returned by a Gaia catalogue cone search with radius 12.8 arcsec as described in earlier work^{100}. This search returned five stars, as dim as gmag = 21.0. The Gaia proper motioncorrected positions of these stars are plotted in all figures. The stars are placed at pixel locations using Kepler’s raDec2Pix code (https://github.com/stevepur/KeplerRaDex2Pix).
Supplementary Figs. 7 and 8 compare the observed and modelled pixels, demonstrating the quality of the PRF modelling. Supplementary Figs. 9 and 10 compare the observed difference image (top left) with the modelled difference image assuming that the transit is on each of the five stars in the cone search. These simulated difference images were created by subtracting simulated scenes similar to Supplementary Figs. 7 and 8, with the intransit scene reducing the flux of the modelled star by a fitted depth.
It is clear from Supplementary Figs. 9 and 10 that a transit on the target star is the only one that remotely matches the observed difference image. The other stars in the Gaia catalogue cannot reproduce the observed signal.
While this analysis excludes the possibility that a different known star hosts the transit signal, it does not address the possibility of an unknown star blended with the target. To investigate this, we first measured the position of the target star by performing a multistar PRF MCMC fit to the average outoftransit image, and the position of the transit signal source by performing a singlestar PRF MCMC fit of the difference image. These fits computed the posterior distribution of pixel position and flux for each star consistent with the data, and used a Gaussian likelihood for each pixel with width given by the propagated perpixel uncertainty of the fitted image. These measurements are differenced to give the distance of the transit source from the target star. Measuring both the target star source and transit source with PRF fitting mitigates possible bias due to PRF error, because the same bias probably occurs for both stars.
The blend probability is computed using equation (14) of Morton’s earlier work^{101}, which gives the probability of a blend that can mimic any planet within 2 arcsec of the target star as a function of the star’s Galactic latitude and Kepler magnitude (caution: the columns in Table 1 of ref. ^{101}, which gives the coefficients for their equation (14), are reversed). For our star, the probability of a planetmimicking blend within 2 arcsec is 3.08 × 10^{−4}. We compute the 3σ radius of the target star on the basis of the 68thpercentile credible interval from the fit to the difference image, and scale the blend probability by the ratio of the 3σ circle to a 2 arcsec circle.
The results are summarized in Supplementary Table 3 for quarters 8 and 16. The transit depth is recovered by taking the ratio of the fitted fluxes of the difference image to the target star from the outoftransit image, demonstrating the success of the fit. The transit source is about 70 mas from the target star, which is just over 1σ. The resulting blend probability is about 2.6 × 10^{−6}.
Statistical validation of Kepler1708 b
Our centroid analysis establishes that the transit signal is associated with the target star and that a blend is highly improbable given current observations. This, in isolation, provides a compelling case that KIC7906827.01 is a genuine planet. This possibility, often dubbed PRF contamination, dominates the catalogue of known Kepler false positives; for example, 1,587 of the 1,859 false positives identified through ephemeris matching^{102} to known eclipsing binaries originate from PRF contamination^{56}. However, eclipsing binaries can also occasionally cause false positives without PRF contamination, via column anomalies, crosstalk and reflections^{102}. However, we note that KIC7906827.01 has already been tested for an eclipsing binary ephemeris match in the aforementioned work^{56} and no matches were found, further strengthening the case that KIC7906827.01 is a genuine planet. To finalize this, we took the shape of the transit light curve, in combination with the stellar parameters, to independently validate KIC7906827.01.
To this end, we used the vespa package developed for precisely this task^{40}. Here, the shape of the transit light curve is compared with a suite of models including both planet and falsepositive scenarios, to evaluate the statistical probability of each. The a priori probability of blending, on the basis of the star’s position and fundamental properties constrained from spectroscopy and Gaia, is used to weigh these scenarios appropriately in the final evaluation. One additional piece of information that can be helpful in this task is the existence and upper limit of an occultation event. A longperiod planet like this should not produce a detectable occultation, and so its existence would put pressure on the planet hypothesis.
An occultation event is generally expected to be of approximately the same duration as the transit, so we can exploit this feature to provide a nonparametric means of detrending all of the Kepler quarters. Specifically, we use a median filter where the bandwidth is set to three times the transit duration of KIC7906827.01, which essentially acts as a lowcut filter removing all variability on timescales greater than this threshold. The detrended light curve was then phase folded onto the ephemeris of the transiting planet modulo a halfperiod shift.
For a circularorbit planet, the occultation should occur at a folded time of precisely zero. However, orbital eccentricity effects cause the occultation to shift away from zero. Since the eccentricity is unknown, especially if we remain agnostic about whether the transit signal is truly associated with the target star, then the shift is also unknown. Accordingly, we created a uniform grid of possible times across the entire orbit, spaced by onetenth of the transit duration.
At each grid point, representing a possible time of occultation, we first evaluated the s.d. within an interval equal to the transit duration. This number was then divided by the square root of the number of data points minus one, and thus represents the achievable precision on an occultation event of similar duration to the transit as a function of orbital phase. Although this precision score exhibits fluctuations as a result of data gaps and sampling effects, we find that it centres around a value of 62 ppm. Repeating using the median deviation as a more robust variance estimator yields 59 ppm. If no occultation effect is detected then, we would estimate a 3σ limit of <180 ppm. For much shorterduration occultation events, this would be overly optimistic though, since the smaller number of data points would inflate the uncertainty. While this essentially approaches infinity for infinitesimalduration events, we adopt an upper limit of 10^{1/2} times shorter, which corresponds to <330 ppm.
The above explicitly assumes no occultation event, which we have to demonstrate. To this end, we took each grid point and evaluated the SNR of an occultation at 20 different trial durations (0.1 to 2.0 times the transit duration in 0.1 steps). From these, we select the highestSNR duration as the saved solution and continue to move through the grid of possible occultation times. In this way, a genuine detection would manifest as a highSNR bump within the grid, where we define the SNR as the mean outofoccultation minus the inoccultation intensity divided by the uncertainty on that mean (as computed using the s.d.).
For Kepler photometry, eclipses generally need to have SNR > 7 to be considered compelling^{38}, and we find no values near this level. The highest recorded SNR amongst 9,225 realized positions with more than two data points within the interval was 3.0. We thus find no evidence for an occultation event of KIC7906827.01. If KIC7906827.01 were a real planet, this would be the expected result, since its longperiod nature means it would be far too dim to be detected photometrically. From the grid, we can also estimate an upper limit on the occultation depth in an alternative way. Specifically, we evaluated max(δ_{occ}, 0) + 3σ_{occ} at each grid point, where δ_{occ} is the occultation depth and σ_{occ} is the uncertainty. We then evaluated the median of this array and added three times the s.d. of the array. This is technically overkill as a 3σ limit, since we have used a 3σ limit twice, but nevertheless it yields <350 ppm as an upper limit. This is in good agreement with our <330 ppm value from earlier and thus we adopt 350 ppm as a 3σ upper limit in what follows.
Using this constraint with the light curve, stellar atmosphere properties and Gaia parallax, we used vespa to calculate the statistical probability of a falsepositive scenario. Eclipsing binary, hierarchical eclipsing binary and blended eclipsing binary scenarios are all highly disfavoured and lead to a planet FPP of 1 in 4,237, or 0.024% (Supplementary Fig. 11). Combining this with the similar independent conclusion from the centroid analysis, we conclude that KIC7906827.01 is a genuine planet to high confidence and thus refer to it as Kepler1708 b in what follows.
Exploring the possibility of alternative astrophysical models for Kepler1708 bi
The case for an exomoon rests upon the lightcurve analysis of the Kepler photometry. In particular, the Bayes factor of 11.9 for the planet–moon model versus the planetonly model drives the exomoon candidacy, as it surpasses the strongevidence threshold of >10 adopted in this work and recommended by previous works^{27}. Bayes factors are influenced by the likelihood function and the priors. In this case, the priors do not have arbitrary bounds but rather well motivated physical limits (for example the longitude of the ascending node lives on a circle from 0 to 2π rad). Further, the case for an exomoon signal remains compelling when viewed in a purely likelihoodbased framework, with a Δχ^{2} = 23.2 improved fit, indicating a 4.8σ effect. On this basis, we argue that the likelihood function drives this result and is the place where we might rightfully apply sceptical interrogation.
The likelihood function can be wrong in two circumstances: (1) the forward model is wrong; (2) the noise model is wrong. We consider each of these in turn but in this section address the former.
Regarding the forward modelling, the models in question are those of a planet transiting a limbdarkened star versus a planet–moon transiting a limbdarkened star. We might well wonder if some other model is ignored that is truly responsible. In general, the asymmetric and shortterm timevariable nature of the transit shape is difficult to explain with some other localized astrophysical effect associated with the planet. For example, a ring system^{103} would need high obliquity, precession and many times greater physical extent than Saturn’s rings to explain the data. Further, such an extensive ring system would compellingly distort the lightcurvederived mean stellar density from the true value in a manner not observed here^{104}.
We performed an additional check to see if the timing of the two inferred moments of exomoon transit were suspicious or improbable. Exomoon transits should be located close to the planetary event, moving back and forth ostensibly randomly with a range governed by their semimajor axis around the planet. The probability distribution of times is expected to follow an arcsine distribution^{83}. Although we only have two such times available, it is possible to evaluate a P value (‘surprisingness’ score), which might indicate tension with our choice of model (that is, the planet–moon model). To investigate this, we took our maximum a posteriori planet–moon and regenerated the light curve but randomized the phase of the exomoon. Repeating 1,000 times, we were able to determine that the moon transits could have occurred up to ±0.25 d either side of the transit, with a spread broadly following the arcsine distribution as expected. This may be compared with the observed times of exomoon transit minima, of −0.226 d and +0.136 d. Adopting the arcsine distribution, we can evaluate the formal likelihood of obtaining the two observed times, which was \({{\mathrm{log}}}\,{{{\mathcal{L}}}}=1.82\). To put this number in some context, we repeated the above but drew two random times from the arcsine distribution, evaluated their likelihood and built up a distribution of likelihoods under the null hypothesis. The distribution is shown in Supplementary Fig. 12, where one can see that the real likelihood score sits very close to the centre of the expected distribution and is thus not remotely surprising. Accordingly, the timing of the observed moon transits does not appear suspicious or offer grounds to reject the planet–moon hypothesis.
Aside from a localized effect, the lightcurve model could be wrong if some other nonlocalized phenomena simply coincidentally occurred during the time of transit of Kepler1708 b. The most obvious example would be a second transiting planet in the system. Given the local window used of ±6.2 d, the probability of this occurring is min(12.4/P_{c}, 1) (depicted in Supplementary Fig. 13 by the green dashed line) and thus improbable for P_{c} ≫ 12.4 d. We note that there are no other known planetary candidates or even thresholdcrossing events^{56} reported for this source. Nevertheless, this remains a possibility if the hypothetical planet were simply too small to have been reliably detected by the Kepler pipeline. Given the depth of the observed deviations, the planet would need to be 2.6 R_{⊕} in radius at some unknown period—so how possible is it that such a planet is hiding in the existing Kepler data?
To explore this possibility, we first regressed a twoplanet transit model to the same data as used for the planetonly and planet–moon fits. Note that these data only locally detrend the time series to within ±6.2 d of the transit events—which we dub \({{{{\mathcal{D}}}}}_{{{{\rm{local}}}}}\) in what follows. We let the second planet have an unknown period with a loguniform prior from 10 to 1,000 d and uniform priors for impact parameters, transit time within the first epoch’s window, and ratio of radii. Using MultiNest to explore the parameter space, the bestfitting solution yielded a χ^{2} substantially lower than that of the planet–moon model, by Δχ^{2} = −16.2. Further, the twoplanet model is only modestly improved over the oneplanet model despite being a nested model with four additional free parameters (thus demanding an improved χ^{2}) with Δχ^{2} = +7.0. Indeed, this leads to the model having a worse marginal likelihood than the planetonly model, with \({{\mathrm{log}}}\,{{{{\mathcal{Z}}}}}_{{{{\rm{2planet}}}}}{{\mathrm{log}}}\,{{{{\mathcal{Z}}}}}_{{{{\rm{2planet}}}}}=0.94\). We note that this is well approximated by evaluating the AIC between the two models using the χ^{2} difference (yielding −1.05). Thus, we find that the local transit photometry, \({{{{\mathcal{D}}}}}_{{{{\rm{local}}}}}\), does not support the twoplanet hypothesis.
We find that the posterior distribution for P_{c} almost replicates the prior of a loguniform form. Thus, in any given log P window, we have approximately the same number of posterior samples. Exploiting this, we group the posterior into eight evenly spaced bins in log P space, with approximately 4,000 samples in each window. From these, we evaluate the maximumlikelihood solution amongst the subset. Since the AIC well approximates the marginal likelihood here, we use it to evaluate the Bayes factor as a function of log P at these eight grid points, which we then splineinterpolate to create a continuous function. The result is shown in Supplementary Fig. 13 (red dotted line), where we can see that longperiod solutions are in greatest tension with the \({{{{\mathcal{D}}}}}_{{{{\rm{local}}}}}\) data.
The above only uses the photometry local to the Kepler1708 b transits, but the broader complete Kepler time series would also be expected to exhibit transit signatures if the signal were caused by an interior transiting planet.
To support planet occurrence estimates from the DR25 Kepler planetcandidate catalogue^{56}, the sensitivity for detecting a planet of a given period and radius was previously measured in detail^{105,106}. The planet detection sensitivity was measured through Monte Carlo transit signal injection and recovery experiments^{107,108}. In previous work^{105}, a model was generated for planet detection sensitivity that depends on the stellar properties and noise characteristics of the Kepler flux time series based on fits to the database of transit signal injections. The planet detection sensitivity model can be calculated for any given Kepler target from the data products hosted by the NEA (https://exoplanetarchive.ipac.caltech.edu/docs/Kepler_completeness_reliability.html) and the accompanying KeplerPORTs Python software package (https://github.com/nasa/KeplerPORTs). Example uses of KeplerPORTs, in the context measuring planet occurrence rates, have been previously published^{109,110,111}.
To calculate a planet detection contour for Kepler1708, we use stellar parameters as updated in this study given in Supplementary Table 2. We adopt stellar limbdarkening parameters for Kepler1708 (0.428, 0.4356, −0.1019, −0.0394; fourparameter nonlinear limbdarkening parameterization) by adopting the limbdarkening values from the target with the closest match in stellar properties in the DR25 Kepler stellar catalogue^{54}. The photometric noise properties for Kepler1708 are provided as supplemental columns in the DR25 stellar catalogue. Kepler1708 was observed for 1,459 d with a duty cycle of 87%. The values of CDPP (combined differential photometric precision^{112}) slope at short and long durations (−0.70477, −0.3524, respectively^{105}) indicate a well behaved flux timeseries data series for Kepler1708 with minimal amounts of nonGaussian noise. The window function and 1σ depth function data^{113} for Kepler1708 were downloaded from the NEA.
The resulting planet detection contour from KeplerPORTs for Kepler1708 is shown in Supplementary Fig. 14. If an additional planet had the proper inclination to transit, the detection contour provides the probability that a particular signal of a given period and radius would have been classified as a planet candidate in the final DR25 Kepler planetcandidate catalogue. As expected, the detection contour degrades toward small planets, as they have smaller transit depths, and at long orbital periods, as fewer transits are available to stack and enhance the detection SNR. The standard version of KeplerPORTs publicly available represents the recoverability of planet signals due to the Kepler pipeline by itself. An additional reduced sensitivity to planet signals can result from the vetting procedure^{56,106,114}. The results shown in Supplementary Fig. 14 take into account the additional loss of sensitivity due to the vetting procedure. The vetting degradation was measured following a procedure similar to the description in section 4.2 of a previous analysis^{111}.
While Supplementary Fig. 14 depicts the entire range of possible radii, for this study we are most interested in the radius slice corresponding to that necessary to explain the exomoonlike signal, namely 2.6 R_{⊕}. Supplementary Fig. 13 (blue solid line) shows a slice in the detection contour plane at this radius as a function of orbital period. The discrete changes in detection probability (at 10, 60, 100, 200, 400 and 700 d) result because the pipeline detection probability and vetting recoverability probability are fitted independently over orbital period regions. The detection probability model fits are not required to be continuous across orbital period region boundaries.
The results described thus far can be combined to evaluate the overall probability that the observed moonlike deviations were caused by a second, previously undetected transiting planet. This is evaluated by taking the product of the three probabilities described thus far: (1) the probability that the second planet coincidentally transits during the local window used to regress Kepler1708 b, (2) the probability that the twoplanet model better explains the local data versus the oneplanet model (in a Bayesian sense) and (3) the probability that a second planet of the required radius evaded detection from the Kepler pipeline. This combined probability as a function of orbital period is shown in solid black in the righthand panel of Supplementary Fig. 13. As shown, the probability does not exceed 1% in the 10–1,000 d region considered. This result is somewhat overoptimistic in that does assign a prior probability for a such a planet existing in the first place and thus tacitly it is unity in the above calculation. On this basis, we find that the probability of a second transiting planet explaining the observed effects is ≲1%.
Noise properties of the detrended Kepler1708 b photometry
As discussed in the previous subsection, the likelihood function could be wrong if the forward model is wrong or the noise model is wrong. With the former investigated, we now turn to the latter. The data used to infer the exomoon candidate span ±6.2 d of the two transit events. These data were already prewhitened by virtue of the detrending process described earlier—specifically methodmarginalized detrending. Since our likelihood function assumes independent Gaussian noise, the likelihood function adopted (and thus inferences thereafter) would be technically wrong if the noise were not described by independent Gaussian noise.
In reality, no observations are ever purely Gaussian. The removal of instrumental and astrophysical trends cannot ever be a perfect process. However, we hope to reach a state where the nonGaussian component is much smaller than the Gaussian noise, and thus the likelihood function adopted can be treated as an excellent approximation. In this subsection, we thus investigate to what extent this appears to be true.
Using the methodmarginalized time series we excluded the data within ±0.55 d of the times of transit minima, to trim the region where the planet–moon transits occur. The remaining data should now be described by a normal distribution. One of the simplest tests of this is to plot a histogram of the normalized intensities (upper panel of Supplementary Fig. 15). On this same figure, we plot the probability density function of a normal distribution centred on unity with an s.d. governed by the measurement uncertainties (that is, this is not a fit). As expected for Gaussian noise, we find excellent agreement. Further, a Kolmogorov–Smirnov test of the Gaussianity reports a P value of 0.10—consistent with expectation. Finally, the χ^{2} of these data against a flatline model is equal to 1,073.8, in close agreement with the expected value given by the number of data points, 1,074. On this basis, the data do indeed appear normal.
Timecorrelated noise can be difficult to identify using the tests described thus far and a better evaluation comes from looking at the temporal properties of the noise. Because of the jumps between each data segment, we split the data into four sections; epoch 1 pretransit, epoch 1 posttransit, epoch 2 pretransit and epoch 2 posttransit. The pretransit moon feature in epoch 1 corresponds to approximately eight cadences and thus we first tried a simple autocorrelation test at lag8 on these four sections, which finds no compelling autocorrelation (P values of 0.54, 0.11, 0.73 and 0.28). We next tried a classic root mean squared binning test, where we bin the data sections into progressively larger bins and evaluate how the scatter evolves. Supplementary Fig. 15 (lower panel) shows the results compared with the expected behaviour of independent Gaussian noise, where again we find no clear evidence for time correlation.
On this basis, we conclude that the detrended time series appears consistent with independent Gaussian noise and thus the adopted likelihood function is appropriate.
FPP of the exomoon signal Kepler1708 bi
An advantage of seeking exomoons is that the null hypothesis is well defined and can be injected into real photometric time series. Briefly, we can take the bestfitting planetonly model parameters, generate a template model and inject this into the SAP or PDC photometry as desired, and repeat the same detection process as outlined in this work. This allows us to directly calculate the FPP of detecting an exomoonlike signal.
We emphasize that this is not the same FPP as used earlier when validating Kepler1708 b. There, the reality of the transit signal was unambiguous, but the underlying cause was uncertain. Here, the situation is somewhat reversed. The reality of the exomoonlike signal is unclear—and the FPP in this section seeks to address this. However, the underlying cause of the signal (assuming it to be true) is not addressed by such a calculation. This has already been addressed earlier, where we concluded that a second unseen transiting planet was the most likely astrophysical false positive, but even this has a probability of ≲1% of explaining the observations. In what follows, we focus on the FPP of the signal itself being astrophysical. Although we refer to this as ‘astrophysical’ hereafter, this is technically somewhat of a misnomer since we are really addressing the probability of timecorrelated noise causing a false positive, which could in fact be considered astrophysical if due to stellar activity.
To inject fake planet signals, we took the maximum a posteriori parameters from the planetonly model fits of Kepler1708 b to define a nullhypothesis template. Quarters 1 to 17 longcadence data are available for KIC7906827 as possible times into which to inject the signal. In some of these quarters, we observed discontinuities in the SAP time series (for example, due to pointing tweaks) and we went through and located these, saving to a library file. We then injected two transits of Kepler1708 b, using the template with the only difference being that τ is randomized. The injection is performed by simply multiplying the SAP and PDC flux values by the template model (=1 outside transits and <1 inside). In this way, the timecorrelated noise structure of the data is preserved.
There are several cases where the injections were rejected and reattempted. For example, if one of the transits is injected into a data gap (for example between quarters) the realization was rejected and retried. Our specific criteria for a ‘good’ injection were the following.

1.
The injected transits must occur more than three transit durations away from the real transit (to avoid signal overlap).

2.
The injection has to occur at least half a transit duration after the beginning of a quarter’s start time, and at least half a duration before the end of a quarter’s start time.

3.
The trimmed (see below) transit epoch files have to contain at least 530 data points in each (ensuring injections have ≳90% of the data volume of the real signals).
The real transits were removed from the photometry, excluding data within two transit durations of the bestfitting transit times. The real analysis trimmed the photometry to within six transit durations of the central times, and thus we use the same trimming here. As with the original analysis, if a discontinuity occurs somewhere within the time series of interest, we only consider the continuous segments surrounding the transit in question. Finally, the number of 530 points was chosen since the original data have 591 (Q8) and 586 (Q16) points. We wish to ensure that the injections contain at least 90% of the smallest of these two (586), which in principle is 527 data points. However, we found that out outlier rejection algorithm rejects approximately 2% of the time series, and by this expectation we need 530 points to ensure the 90% threshold.
In total, we created 200 random injections (and thus 400 injected transits). We next applied the same methodmarginalized detrending algorithm to all 200, with the only difference being that the GP method was dropped for computational expediency. The methodmarginalization algorithm performs a final check for the Durbin–Watson statistic and root mean squared versus bin size behaviour, evaluating a P value against bootstrapped experiments. In some rare cases, this led to an epoch being rejected if none of the methods were able to produce sufficiently whitened time series. If this occurred, and fewer than two detrended transits were outputted, the realization was rejected and restarted with a new random seed.
The detrended light curves were then fitted using MultiNest coupled to LUNA, as before, trying both the planetonly and planet–moon models with identical priors (except that τ is shifted onto the new ephemeris). If the Bayes factor between the two models exceeded 10, denoting strong evidence, it was flagged as a possible candidate as with the real analysis, as shown in Fig. 3. For such cases, of which we found just three instances, the next step was to perform the negativemoonradius test. Two of the three aforementioned cases (injections 103 and 161) pass this test, and we consider these to be ‘false positives’ from the suite of 200 injections. Their signal shapes are shown in Supplementary Fig. 16.
By requiring these signals to be viable moon candidates, in other words signals that our planet–moon model can explain as being physically sound, not all dips and bumps in the light curve trigger a false positive, only the plausible ones. For example, Fig. 2 shows a small deviation around BJD 2456341 that was not interpretable by our fits as a moon signal and thus does not constitute a false positive by this definition.
On this basis, we conclude that the falsepositive rate of the exomoonlike signal of Kepler1708 b is \(1.{0}_{1.0}^{+0.7}\)% (uncertainty from counting statistics).
Interpreting the FPP
Given that we looked at 70 exoplanetary candidates in this survey, one success from 70 with a 1% falsepositive rate might at first seem to fully explain this event without invoking an exomoon. Certainly, this is a valid concern, and one we share. However, this tacitly assumes that the 1% falsepositive rate computed for Kepler1708 b holds for all of the exoplanetary candidates surveyed, which neither has been demonstrated nor can be reasonably assumed. Each case will have its own bespoke FPP dependent upon its specific timecorrelated noise properties. Further, 45 of the 70 surveyed objects have three or more transits (unlike Kepler1708 b) and thus have to also pass a TTV test, which would lower their falsepositive rates by virtue of the extra check.
However, let us assume that the FPP (as caused by timecorrelated noise) was indeed 1%, for the sake of making progress. In this case, it is important to stress that while one false positive is not an unexpected outcome, nor is zero false positives. Indeed, the likelihood ratio of the binomial distribution for n = 70 samples and P = 0.01 between X = 1 false positives and X = 0 false positives is 0.707. In other words, it is marginally more likely that a survey of 70 objects would produce no false positives than one. However, even this does not address what we really care about, which is the probability that this is an exomoon given the signal. Let us step back from the ensemble and look at Kepler1708 b in isolation once again.
Let E stand for ‘has a Kepler1708 bilike exomoon’ (and \(\bar{E}\) means it does not), and Q denotes ‘passes our battery of tests’ (and \(\bar{Q}\) does not). With this notation, we can express the probability we seek as
where Pr(E) is the a priori probability of an exoplanetary candidate in our sample having a Kepler1708 bilike exomoon (that is, the underlying occurrence rate of such moons in the target sample). The denominator can be expanded as
where we have denoted the FPP and truepositive probability (TPP) explicitly. With some rearranging, we can show
The TPP is essentially the completeness, and an accurate assessment is challenged by defining what we even mean by a ‘Kepler1708 bilike exomoon’. However, given that the signal had a 4.8σ significance, we should generally expect a high TPP for such signals (TPP ≃ 1). Put another way, it would be odd if we missed these. A detailed calculation of the TPP is beyond the scope of this work and we argue largely unnecessary for the reasons stated above, as well as the fact that Pr(E) dominates our uncertainty in the calculations. If we set TPP → 1, then we have
From this, we estimate that \(\Pr (E Q) > \Pr (\bar{E} Q)\) if Pr(E) > FPP. Here, then, if 1% or more of our sample host Kepler1708 bilike exomoons, we should expect that the detected signal is most probably a real exomoon rather than a false positive. This calculation reveals the catch22 conundrum facing the interpretation of this detection. In isolation, it is not possible to reliably assess the odds that it is real since we do not know the underlying occurrence rate of similarly sized moons around cold Jupiters.
Zooming back out to the ensemble, the total number of detections of Kepler1708 bilike exomoons should be
In principle, we could define a likelihood function from this to infer Pr(E) based on our one success and see if it is consistent with zero—which would favour Kepler1708 bi being a false positive. However, assuming TPP_{i} ≃ 1 for all 70 is not well motivated here due to the different noise properties of each source, and similarly the FPPs will be distinct, as already discussed.
As this section establishes then, an accurate calculation of the probability of Kepler1708 bi being genuine is marred with challenges, stemming from the unknown occurrence rate of exomoons and the individual target FPP/TPP properties. This also extends to considerations of specific parameters of our retrieved fit versus falsepositive scenarios. In principle, the FPPs and TPPs could be determined with far more extensive computational runs than done here, although we highlight that this study has already taken several years to complete and leveraged supercomputing time throughout (although not continuously). The enormous computational challenge, human time and CO_{2} production associated with such an endeavour has to be weighed against the benefits, or the simple act of just reobserving Kepler1708 b in the future to more straightforwardly (and less ambiguously) address this question.
In conclusion, in considering the exomoonlike signal associated with Kepler1708 b, we can find no firm grounds to reject it as a candidate at this time. Future supporting evidence could be found by detecting TTVs, predicted in the main text to have an amplitude between 1.2 and 77.0 min (95% confidence). In isolation, this would not be sufficient to confirm the moon due to the possibility of perturbing planets. In practice, we argue that the only real way to confirm/deny the existence of the moon convincingly would be highprecision transits of several future epochs, with the next event due on 24 March 2023 (BJD 2460027.86).
Data availability
The data that support the plots within this paper and other findings of this study are made available at https://doi.org/10.5061/dryad.18931zcz9; or from the corresponding author upon reasonable request. Source data are provided with this paper.
Code availability
The MultiNest regression algorithm^{80} is publicly available at https://github.com/farhanferoz/MultiNest. The vespa software package^{40,101} is publicly available at https://github.com/timothydmorton/VESPA. The isochrones software package^{72} is publicly available at https://github.com/timothydmorton/isochrones. The KeplerPORTs software package^{105,107,113} is publicly available at https://github.com/nasa/KeplerPORTs. The raDec2Pix software package is publicly available at https://github.com/stevepur/KeplerRaDex2Pix.
References
Naef, D. et al. HD 80606 b, a planet on an extremely elongated orbit. Astron. Astrophys. 375, L27–L30 (2001).
Gillon, M. et al. Seven temperate terrestrial planets around the nearby ultracool dwarf star TRAPPIST1. Nature 542, 456–460 (2017).
Morbidelli, A. & Raymond, S. N. Challenges in planet formation. J. Geophys. Res. Planets 121, 1962–1980 (2016).
Heller, R. et al. Formation, habitability, and detection of extrasolar moons. Astrobiology 14, 798–835 (2014).
Brown, T. M., Charbonneau, D., Gilliland, R. L., Noyes, R. W. & Burrows, A. Hubble Space Telescope timeseries photometry of the transiting planet of HD 209458. Astrophys. J. 552, 699–709 (2001).
Kipping, D. M., Bakos, G. Á., Buchhave, L., Nesvorný, D. & Schmitt, A. The Hunt for Exomoons with Kepler (HEK). I. Description of a new observational project. Astrophys. J. 750, 115–134 (2012).
Sartoretti, P. & Schneider, J. On the detection of satellites of extrasolar planets with the method of transits. Astron. Astrophys. Suppl. 134, 553–560 (1999).
Szabó, G. Y. M., Szatmáry, K., Divéki, Z. S. & Simon, A. Possibility of a photometric detection of ‘exomoons’. Astron. Astrophys. 450, 395–398 (2006).
Kipping, D. M. Transit timing effects due to an exomoon. Mon. Not. R. Astron. Soc. 392, 181–189 (2009).
Beatty, T. G. & Gaudi, S. B. Predicting the yields of photometric surveys for transiting extrasolar planets. Astrophys. J. 686, 1302–1330 (2008).
Namouni, F. The fate of moons of closein giant exoplanets. Astrophys. J. Lett. 719, L145–L147 (2010).
Barnes, J. W. & O’Brien, D. P. Stability of satellites around closein extrasolar giant planets. Astrophys. J. 575, 1087–1093 (2002).
Wang, J. et al. Planet hunters. VIII. Characterization of 41 longperiod exoplanet candidates from Kepler archival data. Astrophys. J. 816, 127–146 (2015).
Uehara, S., Kawahara, H., Masuda, K., Yamada, S. & Aizawa, M. Transiting planet candidates beyond the snow line detected by visual inspection of 7557 Kepler objects of interest. Astrophys. J. 822, 2–12 (2016).
ForemanMackey, D., Morton, T. D., Hogg, D. W., Agol, E. & Schölkopf, B. The population of longperiod transiting exoplanets. Astron. J. 152, 206–223 (2016).
Wheeler, A. & Kipping, D. M. The weird detector: flagging periodic, coherent signals of arbitrary shape in timeseries photometry. Mon. Not. R. Astron. Soc. 485, 5498–5510 (2019).
Kawahara, H. & Masuda, K. Transiting planets near the snow line from Kepler. I. Catalog. Astron. J. 157, 218–234 (2019).
Canup, R. M. & Ward, W. R. A common mass scaling for satellite systems of gaseous planets. Nature 441, 834–839 (2006).
Kipping, D. et al. The Hunt for Exomoons with Kepler (HEK): V. A survey of 41 planetary candidates for exomoons. Astrophys. J. 813, 14–30 (2015).
Teachey, A., Kipping, D. & Schmitt, A. R. HEK VI: on the dearth of Galilean analogs in Kepler and the exomoon candidate Kepler1625b I. Astron. J. 155, 36–55 (2018).
Teachey, A., Kipping, D. & Schmitt, A. R. Evidence for a large exomoon orbiting Kepler1625b. Sci. Adv. 4, 1784–1788 (2018).
Heller, R., Rodenbeck, K. & Bruno, G. An alternative interpretation of the exomoon candidate signal in the combined Kepler and Hubble data of Kepler1625. Astron. Astrophys. 624, 95–102 (2019).
Kreidberg, L., Luger, R. & Bedell, M. No evidence for lunar transit in new analysis of Hubble Space Telescope observations of the Kepler1625 system. Astrophys. Lett. 877, L15–L20 (2019).
Teachey, A., Kipping, D., Burke, C. J., Angys, R. & Howard, A. W. Loose ends for the exomoon candidate host Kepler1625b. Astron. J. 159, 142–157 (2020).
Hansen, B. M. S. Formation of exoplanetary satellites by pulldown capture. Sci. Adv. 5, 8665–8669 (2019).
Moraes, R. A. & Vieira, N. E. Exploring formation scenarios for the exomoon candidate Kepler 1625b I. Mon. Not. R. Astron. Soc. 495, 3763–3776 (2020).
Kass, R.E. & Raftery, A.E. Bayes factors. J. Am. Stat. Assoc. 90, 773–795 (1995).
Domingos, R. C., Winter, O. C. & Yokoyama, T. Stable satellites around extrasolar giant planets. Mon. Not. R. Astron. Soc. 373, 1227–1234 (2006).
Gong, Y.X., Zhou, J.L., Xie, J.L. & Wu, X.M. The effect of planet–planet scattering on the survival of exomoons. Astron. J. Lett. 769, L14–L18 (2013).
Dawson, R.I., MurrayClay, R.A. & Johnson, J.A. The photoeccentric effect and protohot Jupiters. III. A paucity of protohot Jupiters on supereccentric orbits. Astrophys. J. 798, 66–85 (2015).
Schmitt, J.R., Jenkins, J.M. & Fischer, D.A. A search for lost planets in the Kepler multiplanet systems and the discovery of the longperiod, Neptunesized exoplanet Kepler150 f. Astron. J. 153, 180–188 (2017).
Ziegler, C. et al. Measuring the recoverability of close binaries in Gaia DR2 with the RoboAO Kepler Survey. Astron. J. 156, 259–269 (2018).
Ziegler, C. et al. RoboAO Kepler Survey. V. The effect of physically associated stellar companions on planetary systems. Astron. J. 156, 83–101 (2018).
SanchisOjeda, R. et al. Alignment of the stellar spin with the orbits of a threeplanet system. Nature 487, 449–453 (2012).
McQuillan, A., Mazeh, T. & Aigrain, S. Rotation periods of 34,030 Kepler mainsequence stars: the full autocorrelation sample. Astrophys. J. Suppl. 211, 24–37 (2014).
Kipping, D. LUNA: an algorithm for generating dynamic planet–moon transits. Mon. Not. R. Astron. Soc. 416, 689–709 (2011).
Kipping, D. et al. The possible moon of Kepler90g is a false positive. Astrophys. J. Lett. 799, L14–L18 (2014).
Christiansen, J. et al. Measuring transit signal recovery in the Kepler pipeline. I. Individual events. Astrophys. J. Suppl. 207, 35–46 (2013).
Bryson, J. et al. Identification of background false positives from Kepler data. Publ. Astron. Soc. Pac. 125, 889–923 (2013).
Morton, T. et al. False positive probabilities for all Kepler objects of interest: 1284 newly validated planets and 428 likely false positives. Astrophys. J. 822, 86–100 (2016).
Chen, J. & Kipping, D. Probabilistic forecasting of the masses and radii of other worlds. Astrophys. J. 834, 17–29 (2017).
Teachey, A. & Kipping, D. Evidence for a large exomoon orbiting Kepler1625b. Sci. Adv. 4, 1784–1792 (2018).
Mayor, M. & Queloz, D. A Jupitermass companion to a solartype star. Natur. 378, 355–359 (1995).
Kreidberg, L., Luger, R. & Bedell, M. No evidence for lunar transit in new analysis of Hubble Space Telescope observations of the Kepler1625 system. Astrophys. J. Lett. 877, L15–L20 (2019).
Hut, P. Tidal evolution in close binary systems. Astron. Astrophys. 99, 126–140 (1981).
Quarles, B., Li, G. & RosarioFranco, M. Application of orbital stability and tidal migration constraints for exomoon candidates. Astrophys. J. Lett. 902, L20–L27 (2020).
Ni, D. Empirical models of Jupiter’s interior from Juno data. Moment of inertia and tidal Love number k_{2}. Astron. Astrophys. 613, 32–40 (2018).
Leconte, J., Chabrier, G., Baraffe, I. & Levrard, B. Is tidal heating sufficient to explain bloated exoplanets? Consistent calculations accounting for finite initial eccentricity. Astron. Astrophys. 516, 64–76 (2010).
Szulágyi, J., Mayer, L. & Quinn, T. Circumplanetary discs around young giant planets: a comparison between coreaccretion and disc instability. Mon. Not. R. Astron. Soc. 464, 3158–3168 (2017).
Cilibrasi, M. et al. Satellites form fast & late: a population synthesis for the Galilean moons. Mon. Not. R. Astron. Soc. 480, 4355–4368 (2018).
Inderbitzi, C., Szulágyi, J., Cilibrasi, M. & Mayer, L. Formation of satellites in circumplanetary discs generated by disc instability. Mon. Not. R. Astron. Soc. 499, 1023–1036 (2020).
Shabram, M. & Boley, A. The evolution of circumplanetary disks around planets in wide orbits: implications for formation theory, observations, and moon systems. Astrophys. J. 767, 63–71 (2013).
Akeson, R. L. et al. The NASA Exoplanet Archive: data and tools for exoplanet research. Publ. Astron. Soc. Pac. 125, 989–999 (2013).
Mathur, S. et al. Revised stellar properties of Kepler targets for the Q1–17 (DR25) transit detection run. Astrophys. J. Suppl. 229, 30–47 (2017).
Kipping, D. Binning is sinning: morphological lightcurve distortions due to finite integration time. Mon. Not. R. Astron. Soc. 408, 1758–1769 (2010).
Thompson, S. E. et al. Planetary candidates observed by Kepler. VIII. A fully automated catalog with measured completeness and reliability based on Data Release 25. Astrophys. J. Suppl. 235, 38–86 (2018).
Thompson, S. E. et al. Kepler Data Release 25 Notes Kepler Science Document KSCI19065002 (2016).
Morris, R.L., Jenkins, J.M. & Twicken, J. Removal of cosmic rayinduced noise from Kepler data. In Annual Meeting for Division for Planetary Sciences DPS 44 113.17 (American Astronomical Society, 2012).
Smith, J. C. et al. Kepler presearch data conditioning II—a Bayesian approach to systematic error correction. Publ. Astron. Soc. Pac. 124, 1000–1014 (2012).
Jenkins, J. M. et al. Initial characteristics of Kepler long cadence data for detecting transiting planets. Astrophys. J. Lett. 713, L120–L125 (2010).
Walker, G. A. H. et al. The differential rotation of κ^{1} Ceti as observed by MOST. Astrophys. J. 659, 1611–1622 (2007).
Kallinger, T., Hekker, S., García, R. A., Huber, D. & Matthews, J. M. Precise stellar surface gravities from the time scales of convectively driven brightness variations. Sci. Adv. 2, e1500654 (2016).
Carter, J. A., Winn, J. N., Gilliland, R. & Holman, M. J. Nearinfrared transit photometry of the exoplanet HD 149026b. Astrophys. J. 696, 241–253 (2009).
Durbin, J. & Watson, G. S. Testing for serial correlation in least squares regression, I. Biometrika 37, 409–428 (1950).
Mazeh, T. & Faigler, S. Detection of the ellipsoidal and the relativistic beaming effects in the CoRoT3 lightcurve. Astron. Astrophys. 521, L59–L62 (2010).
Waldmann, I. P. et al. Groundbased nearinfrared emission spectroscopy of HD 189733b. Astrophys. J. 744, 35–45 (2012).
Kipping, D. M. et al. The Hunt for Exomoons with Kepler (HEK): II. Analysis of seven viable satellitehosting planet candidates. Astrophys. J. 770, 101–130 (2013).
Schwarz, G. E. Estimating the dimension of a model. Ann. Stat. 6, 461–464 (1978).
Sandford, E. & Kipping, D. Know the planet, know the star: precise stellar densities from Kepler transit light curves. Astron. J. 154, 228–246 (2017).
Dotter, A. et al. The Dartmouth Stellar Evolution Database. Astrophys. J. Suppl. 178, 89–125 (2008).
Luri, X. et al. Gaia Data Release 2. Using Gaia parallaxes. Astron. Astrophys. 616, 9–27 (2018).
Morton, T. D. isochrones: stellar model grid package. Astrophysics Source Code Library ascl:1503.010 (2015).
Berger, T. D. et al. The Gaia–Kepler Stellar Properties Catalog. I. Homogeneous fundamental properties for 186,301 Kepler stars. Astrophys. J. 159, 280–297 (2020).
Mandel, K. & Agol, E. Analytic light curves for planetary transit searches. Astrophys. J. 580, L171–L175 (2002).
Kipping, D. Efficient, uninformative sampling of limb darkening coefficients for twoparameter laws. Mon. Not. R. Astron. Soc. 435, 2152–2160 (2013).
Kipping, D. & Tinetti, G. Nightside pollution of exoplanet transit depths. Mon. Not. R. Astron. Soc. 407, 2589–2598 (2010).
Kipping, D. M. Transiting planets—lightcurve analysis for eccentric orbits. Mon. Not. R. Astron. Soc. 389, 1383–1390 (2008).
Kipping, D., Dunn, W. R., Jasinski, J. M. & Manthri, V. P. A novel method to photometrically constrain orbital eccentricities: Multibody Asterodensity Profiling. Mon. Not. R. Astron. Soc. 421, 1166–1188 (2012).
Porter, S. B. & Grundy, W. M. Postcapture evolution of potentially habitable exomoons. Astrophys. J. Lett. 736, L14–L19 (2011).
Feroz, F., Hobson, M. P. & Bridges, M. MultiNest: an efficient and robust Bayesian inference tool for cosmology and particle physics. Astrophys. J. Lett. 398, 1601–1614 (2009).
Kipping, D. How to weigh a star using a moon. Mon. Not. R. Astron. Soc. 409, L119–L123 (2010).
Simon, A. E., Szabó, Gy. M., Kiss, L. L. & Szatmáry, K. Signals of exomoons in averaged light curves of exoplanets. Mon. Not. R. Astron. Soc. 419, 164–171 (2012).
Heller, R. Detecting extrasolar moons akin to solar system satellites with an orbital sampling effect. Astrophys. J. 787, 14–28 (2014).
Carrera, D., Raymond, S. N. & Davies, M. B. Planet–planet scattering as the source of the highest eccentricity exoplanets. Astron. Astrophys. 629, L7–L12 (2019).
Kipping, D. Investigations of approximate expressions for the transit duration. Mon. Not. R. Astron. Soc. 407, 301–313 (2010).
Dawson, R. I. & Johnson, J. A. The photoeccentric effect and protohot Jupiters. I. Measuring photometric eccentricities of individual transiting planets. Astrophys. J. 756, 122–134 (2012).
Barnes, J. W. Effects of orbital eccentricity on extrasolar planet transit detectability and light curves. Publ. Astron. Soc. Pac. 119, 986–993 (2007).
Burke, C. J. Impact of orbital eccentricity on the detection of transiting extrasolar planets. Astrophys. J. 679, 1566–1573 (2008).
Kipping, D. Bayesian priors for the eccentricity of transiting planets. Mon. Not. R. Astron. Soc. 444, 2263–2269 (2014).
Kipping, D. Parametrizing the exoplanet eccentricity distribution with the beta distribution. Mon. Not. R. Astron. Soc. 434, L51–L55 (2013).
Ford, E. B. Improving the efficiency of Markov chain Monte Carlo for analyzing the orbits of extrasolar planets. Astrophys. J. 642, 505–522 (2006).
Anderson, R. L. et al. WASP30b: a 61 M_{Jup} brown dwarf transiting a V = 12, F8 star. Astrophys. J. Lett. 726, L19–L23 (2011).
Dickey, J. M. The weighted likelihood ratio, linear hypotheses on normal location parameters. Ann. Stat. 42, 204–223 (1971).
Kipping, D. Characterizing distant worlds with asterodensity profiling. Mon. Not. R. Astron. Soc. 440, 2164–2184 (2014).
Kipping, D. The exomoon corridor: half of all exomoons exhibit TTV frequencies within a narrow window due to aliasing. Mon. Not. R. Astron. Soc. 500, 1851–1857 (2021).
Kipping, D. An independent analysis of the six recently claimed exomoon candidates. Astrophys. J. Lett. 900, 44–55 (2020).
Béky, B., Holman, J., Kipping, D. & Noyes, R. W. Stellar rotation–planetary orbit period commensurability in the HATP11 system. Astrophys. J. 788, 1 (2014).
Béky, B., Kipping, D. & Holman, J. SPOTROD: a semianalytic model for transits of spotted stars. Mon. Not. R. Astron. Soc. 442, 3686–3699 (2014).
Akaike, H. A new look at the statistical model identification. IEEE Trans. Autom. Control 19, 716–723 (1974).
Bryson, S. T. & Morton, T. D. Planet Reliability Metrics: Astrophysical Positional Probabilities for Data Release 25 KSCI19108001 (2017).
Morton, T. & Johnson, J. A. On the low false positive probabilities of Kepler planet candidates. Astrophys. J. 738, 170–181 (2011).
Coughlin, J. L. et al. Contamination in the Kepler field. Identification of 685 KOIs as false positives via ephemeris matching based on Q1–Q12 data. Astrophys. J. 147, 119–130 (2014).
Barnes, J. W. & Fortney, J. J. Transit detectability of ring systems around extrasolar giant planets. Astrophys. J. 616, 1193–1203 (2004).
Zuluaga, J. I., Kipping, D. M., Sucerquia, M. & Alvarado, J. A. A novel method for identifying exoplanetary rings. Astrophys. J. Lett. 803, L14–L20 (2015).
Burke, C. J. & Catanzarite, J. Planet Detection Metrics: PerTarget Detection Contours for Data Release 25 Kepler Science Document KSCI19111002 (2017).
Christiansen, J. L. et al. Measuring transit signal recovery in the Kepler pipeline. IV. Completeness of the DR25 planet candidate catalog. Astron. J. 160, 159–168 (2020).
Burke, C. J. & Catanzarite, J. Planet Detection Metrics: PerTarget FluxLevel Transit Injection Tests of TPS for Data Release 25 Kepler Science Document KSCI19109002 (2017).
Christiansen, J. L. et al. Planet Detection Metrics: PixelLevel Transit Injection Tests of Pipeline Detection Efficiency for Data Release 25 Kepler Science Document KSCI19110001 (2017).
Burke, C. J. et al. Terrestrial planet occurrence rates for the Kepler GK dwarf sample. Astrophys. J. 809, 8–15 (2015).
Mulders, G. D., Pascucci, I., Apai, D. & Ciesla, F. J. The Exoplanet Population Observation Simulator. I. The inner edges of planetary systems. Astron. J. 156, 24–43 (2018).
Bryson, J. L. et al. A probabilistic approach to Kepler completeness and reliability for exoplanet occurrence rates. Astron. J. 159, 279–311 (2020).
Christiansen, J. L. et al. The derivation, properties, and value of Kepler’s combined differential photometric precision. Publ. Astron. Soc. Pac. 124, 1279–1302 (2012).
Burke, C. J. & Catanzarite, J. Planet Detection Metrics: Window and OneSigma Depth Functions for Data Release 25 Kepler Science Document KSCI19101002 (2017).
Coughlin, J. L. et al. Planetary candidates observed by Kepler. VII. The first fully uniform catalog based on the entire 48month data set (Q1–Q17 DR24). Astrophys. J. Suppl. 224, 12–36 (2016).
Acknowledgements
D.K. thanks donors M. Sloan, L. Sanborn, D. Daughaday, A. Jones, E. West, T. Zajonc, C. Wolfred, A. de Vaal, M. Forbes, C. Souter, J. Rockett, S. Hannum, T. Donkin and M. Elliott. D.K. acknowledges support from NASA grant 80NSSC21K0960. J.S. acknowledges financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant 948467). Analysis was carried out in part on the NASA Supercomputer PLEIADES (grant HECSMD171386), provided by the NASA HighEnd Computing (HEC) Program through the NASA Advanced Supercomputing (NAS) Division at Ames Research Center. This Article includes data collected by the Kepler Mission. Funding for the Kepler Mission is provided by the NASA Science Mission Directorate. This work has made use of data from the European Space Agency (ESA) mission Gaia (https://www.cosmos.esa.int/gaia), processed by the Gaia Data Processing and Analysis Consortium (DPAC, https://www.cosmos.esa.int/web/gaia/dpac/consortium). Funding for the DPAC has been provided by national institutions, in particular the institutions participating in the Gaia Multilateral Agreement.
Author information
Authors and Affiliations
Contributions
D.K. performed the data reduction, analysis and interpretation and wrote the majority of the text. S.B. performed the centroid analysis and interpretation. C.B. performed the KeplerPORTs analysis. J.C. and K.H.U. performed the vespa validation. B.Q., B.H. and J.S. wrote the formation and evolutionary interpretation sections. A.T. consulted with the authors on falsepositive calculations and signal morphologies.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Astronomy thanks David Martin, Daniel Fabrycky and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Extended data
Extended Data Fig. 1 Probability distribution of the cool giant’s eccentricities.
Left: We extract a random draw from the eccentricity posterior distribution of each planet and apply a smooth kernel density estimator (KDE) to the sample with a Gaussian kernel. Each line represents 1 of 100 such realisations. Right: Credible intervals evaluated using 10^{5} such samples as computed in the left panel.
Extended Data Fig. 2 Transit light curves of KIC8681125.01 for the first (left) and second (right) epochs.
Top: Each panel shows the method marginalised detrended photometry centred on the times of transit, with the maximum likelihood planet–moon fit overlaid in solid black. Model comparison statistics are provided within the inset box. Bottom: Same as above but for a model with a single planet and variable blend factor between the two epochs. This model substantially outperforms the planet–moon model.
Extended Data Fig. 3 Transit light curves of KIC5351250.06/Kepler150f for the first (left) and second (right) epochs.
Each row shows a different model fit to the same data. Whilst the planet–moon model is clearly a better fit than the planetonly model, a 2spot model is able to outperform either and is well motivated from the activity levels observed in the outoftransit light curve.
Extended Data Fig. 4 Detrended transit light curves of KIC7906827.01 for the first (left) and second (right) epochs.
Each row shows a different combination of light curve detrending method and input data, which are combined to build the method marginalised product. For each, we overlay the maximum a posteriori planet–moon model as conditioned upon the method marginalised light curve, and a comparison of how much better it matches the data versus the planetonly model, in a chisquared sense.
Extended Data Fig. 5 Pixellevel comparison the two transits of KIC7906827.01.
Left: Pixel logintensity is shown for the postage stamp downloaded for KIC7906827 from the Kepler spacecraft, for epochs 1 (top) and 2 (bottom). The black solid outline shows the optimal aperture selected by the Kepler pipeline. Middle: Same as the left, except we show the signal to noise ratio (SNR) of the planetary transit signal in each pixel. As expected, the transit signal is colocated with the brightest source in view. Right: Same as the middle, except we show the chisquared improvement of the planet–moon model over the planetonly model in each pixel light curve after local detrending. As expected, the moon signal appears colocated with the target.
Supplementary information
Supplementary Information
Supplementary Figs. 1–16 and Table 3.
Supplementary Table 1
Initial (columns 2–4) and secondary (columns 5–7) exomoon candidacy tests applied to the 70 cool giants (column 1) in our survey. For each, we simply mark whether the test was passed/failed with a tick or cross. The dagger symbol denotes that the circularity test was only failed for the planet–moon model.
Supplementary Table 2
Fundamental stellar parameters inferred for the coolgiant host stars in our sample using an isochrone analysis. Values quoted define the median and surrounding 68.3% confidence interval of the posterior distributions.
Source data
Source Data Fig. 1
Individual eccentricity constraints.
Source Data Fig. 2
Detrended photometry of KIC7906827.
Source Data Fig. 3
Injected planetonly realization results.
Source Data Extended Data Fig. 1
Population eccentricity constraints.
Source Data Extended Data Fig. 2
Detrended photometry of KIC8681125.
Source Data Extended Data Fig. 3
Detrended photometry of KIC5351250.
Source Data Extended Data Fig. 4
Multimethod detrended photometry of KIC7906827.
Source Data Extended Data Fig. 5
Pixellevel data for KIC7906827.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kipping, D., Bryson, S., Burke, C. et al. An exomoon survey of 70 cool giant exoplanets and the new candidate Kepler1708 bi. Nat Astron 6, 367–380 (2022). https://doi.org/10.1038/s41550021015391
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1038/s41550021015391