To date, little is known about the evolution of fern genomes, with only two small genomes published from the heterosporous Salviniales. Here we assembled the genome of Alsophila spinulosa, known as the flying spider-monkey tree fern, onto 69 pseudochromosomes. The remarkable preservation of synteny, despite resulting from an ancient whole-genome duplication over 100 million years ago, is unprecedented in plants and probably speaks to the uniqueness of tree ferns. Our detailed investigations into stem anatomy and lignin biosynthesis shed new light on the evolution of stem formation in tree ferns. We identified a phenolic compound, alsophilin, that is abundant in xylem, and we provided the molecular basis for its biosynthesis. Finally, analysis of demographic history revealed two genetic bottlenecks, resulting in rapid demographic declines of A. spinulosa. The A. spinulosa genome fills a crucial gap in the plant genomic landscape and helps elucidate many unique aspects of tree fern biology.
Land plants evolved 470 million years ago (Ma) from aquatic charophycean algae1 and have since transformed the terrestrial ecosystem. The body plan of land plants has undergone a series of developmental, biochemical and physiological adaptations, one of which is the appearance of vascular tissues. In seed plants, xylem, with thickened cell walls, provides the trunk with high water-conducting efficiency and strong structural support. Lignin is an essential component of xylem secondary cell walls—it not only gives mechanical support in fibre cells but also forms a hydrophobic surface in vessels to aid water transport2.
Outside of seed plants, the fern order Cyatheales is one of the few lineages having arborescent trunks. The fossil record of Cyatheaceae in Cyatheales is the richest in the Jurassic period, and the more recent diversification has given rise to an estimated 643 species in four genera3. Like most homosporous ferns, members of Cyatheaceae have large genomes (1C = 6.48–9.63 picogram) and a high chromosome base number (X = 69)4. However, in contrast to many other groups of ferns, recent polyploidy is rare in Cyatheaceae5,6.
Tree ferns also have high ornamental values and are regarded as a resource for natural products with pharmaceutical applications. Some metabolites have been identified as having anti-tumour and antibacterial activities in the tree fern Alsophila spinulosa (Cyatheaceae)7,8,9, but they probably represent only a small fraction of the total natural product diversity. Many tree fern species are also being overexploited, which, in combination with climate change, poses serious threats to their survival. A better understanding of their recent demographic history will help guide future conservation efforts.
In this study, we generated a chromosomal-scale genome assembly for the tree fern A. spinulosa. We characterized its genome in detail, including DNA methylation, repeat landscape and the history of whole-genome duplications (WGDs). We then carried out genome-powered investigations into vascular tissues and metabolic diversity in A. spinulosa. Finally, from genome resequencing data, we reconstructed the demographic history of A. spinulosa.
Results and discussion
Genome assembly and annotation
The genome of A. spinulosa (Fig. 1a) was estimated to be 6.23 Gb in size and had a heterozygosity of 0.28% (Extended Data Fig. 1). We conducted de novo genome assembly of A. spinulosa at a chromosome level based on 902 Gb (145× coverage) of corrected single-molecular real-time (SMRT) long reads, 386 Gb (62× coverage) of clean Illumina short reads and 399 Gb (63× coverage) high-throughput chromatin conformation capture (Hi-C) data (Supplementary Table 1). The assembled genome size was 6.27 Gb, with 6.23 Gb anchored to 69 pseudochromosomes, and N50 sizes were 1.80 Mb and 92.48 Mb, respectively, for contigs and scaffolds (Extended Data Fig. 1, Supplementary Table 2 and Supplementary Fig. 1). The mapping rates of Illumina and RNA-seq reads to the genome were 97.9% and 95.8%, respectively. Evaluation of the assembly based on the interspersed long terminal repeat (LTR) retrotransposons10 showed that the LTR assembly index score was 17.32, comparable to that of Arabidopsis (TAIR10). BUSCO (Benchmarking Universal Single-Copy Orthologs) assessment11 using the Eukaryota_odb10 database (10 September 2020) showed that 249 (97.6% of 255) complete BUSCO genes were covered in the assembly (Supplementary Table 3).
A total of 4.68 Gb was identified as repetitive sequences, with retrotransposons (2.52 Gb) as the main transposable elements (TEs). Within the LTR family, the Gypsy and Copia families were predominant, accounting for 24.91% and 12.47% of the genome (Supplementary Table 4). Gene prediction using the Geta pipeline on the repeat-masked genome resulted in 67,831 high-confidence protein-coding genes, of which 95.36% can be functionally annotated (Supplementary Tables 5 and 6). The average intron length was 11.46 times that in Arabidopsis thaliana (Supplementary Table 7). The predicted proteome included 72.1% complete and 21.6% fragmented BUSCO genes against the Eukaryota_odb10 database (Supplementary Table 3). We also performed small RNA sequencing in leaves and identified 182 known and 181 potentially new microRNAs (Supplementary Text).
Genome evolution and genomic features
Knowledge of DNA methylation in ferns is very limited12. Although angiosperm genomes generally exhibit high levels of gene body methylation (gbM), gbM in Selaginella and bryophytes is apparently rare12,13. Here our whole-genome bisulfite sequencing (WGBS) in A. spinulosa leaves revealed an extremely high level (88.87%) of mCG and a high level (66.83%) of mCHG (H = A, T, C). However, the mCHH level was 0.03%, much lower than that in other plant species studied previously14 (Fig. 1b). In addition, we found clear evidence of gbM in A. spinulosa, most of which is under the CG context (Fig. 1b). Although gbM in ferns has been documented previously15, our genome-wide data provide a much better picture of its prevalence. Centromeric and pericentromeric regions had higher CHG methylation levels than other regions, and mCG and mCHG levels in Copia, Gypsy and EnSpm were also high (Fig. 1b), suggesting that repeats and TEs were highly methylated in A. spinulosa. The A. spinulosa genome had six DNA methyltransferase genes, including one METHYLTRANSFERASE (MET), two CHROMOMETHYLASE (CMT) and three DOMAINS REARRANGED METHYLASE (DRM) genes (Supplementary Fig. 2). Phylogenetic analysis showed that the two A. spinulosa CMTs were in the hCMTα clade (Supplementary Fig. 3) and were not orthologous to CMT3, which is linked to gbM in angiosperms16. How gbM takes place in A. spinulosa without CMT3 requires further functional studies.
Gene family evolution
We constructed a phylogenetic tree of 12 species, including 4 seed plants, 3 ferns, 1 lycophyte, 3 bryophytes and 1 outgroup (Fig. 1c). A total of 23,833 orthologous groups, covering 301,746 genes, were circumscribed. Gene-family evolution analysis identified 1,737 families expanded and 5,228 families contracted along the branch leading to ferns. Gene Ontology (GO) and Kyoto Encyclopedia of Genes and Genomes (KEGG) analyses of the 7,035 expanded gene families in A. spinulosa compared with the water ferns (Azolla filiculoides and Salvinia cucullata) resulted in 334 significantly enriched GO terms and 63 KEGG pathways (Supplementary Data 1). These include those involved in the biosynthesis of secondary metabolites, such as flavonoids, phenylpropanoids and terpenoids, which might be related to the natural product diversity in tree ferns. Consistently, A. spinulosa had higher gene numbers in the 11 monolignol pathway enzyme families than A. filiculoides and S. cucullata (Supplementary Table 8), in which eight families, PAL, 4CL, HCT, CSE, CCR, CCoAOMT, CAD and C3H, had duplicated gene copies (Supplementary Table 9), implying that lignin biosynthesis is enhanced in A. spinulosa.
We observed a significant expansion in some transcription factor (TF) families, such as MYB, NAC, bHLH and MADS-box, compared with the two water ferns (Supplementary Table 10). However, compared with A. thaliana, the MADS-box genes involved in flowering (including FLC, SOC1, SEP, AP3/PI, AG and AP1/FUL) were absent in A. spinulosa (Supplementary Fig. 4). YABBY, which encodes a key TF regulating leaf morphogenesis in angiosperms, is absent in the water ferns17 and Selaginella moellendorffii18, but present in the lycophyte species Huperzia selago19 and hornworts20. We could not identify a YABBY orthologue in A. spinulosa, supporting the idea that YABBY has been lost at least three times in land plant evolution (in setaphytes, Selaginella and ferns). NOP10 is a crucial gene for female gametophyte formation in flowers21. This gene can be found in bryophytes and S. cucullata, but not in A. filiculoides, A. spinulosa or Ginkgo biloba (Supplementary Fig. 5), suggesting a dynamic evolutionary history. The genome assembly of A. spinulosa will aid future studies on gene family evolution across land plants.
History of WGD
Two putative WGD events were identified in A. spinulosa using a combination of methods, including synonymous substitutions per site (Ks), synteny analysis and phylogenetic reconciliation. Mixture modelling of the Ks data provided evidence for two separate WGD events with peaks centred on Ks = 0.3 and Ks = 1.5. Likewise, evidence from synteny provided a high degree of support for the more recent WGD with 7,766 genes in 264 collinear blocks with a median Ks between 0.2 and 0.5 (Fig. 1d,e and Extended Data Fig. 2).
Additional Ks plots constructed using transcriptome data from other tree fern species in Gymnosphaera and Sphaeropteris exhibited similar distributions to those made using the A. spinulosa genome. Thus, the most recent WGD event is probably shared between all members of Cyatheaceae. This ‘Cyatheaceae WGD’ event (N4) was corroborated by gene-tree species-tree reconciliation, verified by comparison with null and positive simulations of gene-tree evolution (Fig. 1d). Further analysis found similar support for a more ancient ‘Cyatheales WGD’ event in addition to the more recent WGD shared among Cyatheaceae (Extended Data Fig. 3).
The preservation of synteny following the most recent ‘Cyatheaceae WGD’ is remarkable given Cyatheaceae’s crown age of 108.63–170.86 Myr22—roughly the same period at which monocots and dicots diverged. Such preservation might be associated with the slow rate of evolution in tree ferns. Previous research has found a sudden decrease in chloroplast nucleotide substitution rate that is tied to the origin of arborescence in ferns23. Here we were able to further show that the deceleration is genome-wide in A. spinulosa and not restricted to the chloroplast genome (Extended Data Fig. 4). It is possible that arborescence might also be correlated with the extremely slow process of diploidization in A. spinulosa. Further investigation is required to determine whether gene order has been so strictly maintained in other members of the Cyatheaceae and other non-arborescent ferns. In any case, it is clear that genome evolution after WGD has followed quite different trajectories in A. spinulosa and angiosperms.
Divergent expression of homoeologues
To understand how duplicated gene pairs (that is, homoeologues) diverge in expression following WGD, we conducted differential expression analysis using RNA-seq data from stem, leaf, sorus and gametophyte tissues. We found that homoeologous gene pairs in A. spinulosa have undergone substantial differentiation in gene expression following duplication. Of the syntenic gene pairs resulting from the most recent WGD (Ks between 0.2 and 0.5), over half exhibit at least a fourfold difference in expression with regard to tissue type and/or mean expression level (Extended Data Fig. 3). This result is consistent with previous work demonstrating that WGD often precipitates large-scale shifts in gene expression24,25,26. Although we did not find evidence of expression bias between collinear blocks of genes on different chromosomes, our lack of information regarding the polyploid ancestor may obscure evidence of expression level dominance or homoeologue expression bias in A. spinulosa.
Development of vascular tissue in woody trunk of A. spinulosa
Anatomy of vascular tissue in stem
To investigate the development of woody trunk in tree ferns, we performed anatomical observations on the xylem, phloem and sclerenchymatic belt that comprise the vascular bundle in stems (Fig. 2a). The cells were segregated for these tissues, and under a microscope we could observe lignin only in xylem cells (based on the lignin stain safranine; Fig. 2b). We did not observe the perforation on the end walls, indicating that these cells are tracheids (Fig. 2b). The average length of the tracheids was 1.48 ± 0.18 cm, as measured by microscopy. Under scanning electron microscopy (SEM), tracheids exhibited scalariform thickening in their whole walls, and they were arranged next to each other (Fig. 2c,d). Using X-ray computed microtomography (microCT), we made three-dimensional reconstructions and observed that tracheids had irregular (crooked) shapes (Fig. 2e), consistent with the observations under SEM. These tracheids were bundled together closely, augmenting mechanical strength for support. The wall thickness of cells in the sclerenchymatic belt was measured as 1.86 ± 0.21 µm, about two times that of pith parenchyma cells (0.95 ± 0.12 µm) (Fig. 2f), indicating that the sclerenchymatic belt may also confer stem support.
Lignin accumulation in stems
Lignified cell walls provide superior structural support and are considered a key innovation during the evolution of vascular plants. Characterization of lignin structure in seed-free plants is limited27. We determined the lignin content and composition in stems using the classical Klason method, which detected a high lignin content in xylem, at a level of 39.92% of cell wall residue, the fraction of the biomass remaining after the removal of extractives by simple but extensive solvent extraction (Fig. 2g and Supplementary Table 11). Analytical thioacidolysis showed that xylem contained mainly guaiacyl (G) lignin units and only trace levels of p-hydroxyphenyl (H) and syringyl (S) lignins, as was confirmed by nuclear magnetic resonance (NMR) spectroscopy (Fig. 2h). Both thioacidolysis and NMR analysis detected very trace amounts of G and S lignin in phloem and the sclerenchymatic belt (Supplementary Table 11 and Supplementary Fig. 6), suggesting that the lignin contents in these tissues measured by the Klason method may be an artefact due to attributing to other similar compounds such as aromatics and protein residues28. Consistent with the segregation analysis (Fig. 2b), chemical composition analyses showed that G lignins were mainly accumulated in xylem.
The low level of S lignin in A. spinulosa is in stark contrast to what was found in the lycophyte Selaginella. Selaginella had independently evolved S lignin by recruiting enzymes that are not part of the canonical biosynthetic pathway29,30. Although S lignin is rich in Selaginella, it is in the cortex, and G lignin is predominantly deposited in the transporting tissues27,29,31. A broader survey of lignin composition in ferns and lycophytes, especially those with arborescent habits, is needed to better understand the adaptive roles of lignin outside of seed plants.
Genes associated with xylem development
We performed RNA-seq analysis and obtained 988 differentially expressed genes (DEGs) in xylem compared with pith, sclerenchymatic belt, phloem and leaf (greater than twofold change and q < 0.01), among which 64 were TFs (Supplementary Data 2). We first examined the lignin pathway genes in xylem. Among the 395 gene models in 11 enzyme families of monolignol biosynthesis (Fig. 3a and Supplementary Data 3), 79 genes were highly expressed in xylem, and 21 genes were significantly upregulated in xylem (Fig. 3b and Supplementary Data 4). Among the 21 genes, AspiPAL4, 4CL3, 4CL5, CAD1, CCR2a, COMT2, CSE1, HCT1b, C3H3, C4H2, C4H3, CCoAOMT1, CCoAOMT2 and CCoAOMT3a encode the orthologues of the essential enzymes of lignin biosynthesis in poplar (Supplementary Data 3), suggesting the roles of these 14 genes in lignin biosynthesis in xylem. Whether other xylem-differentially-expressed putative phenylpropanoid genes (Supplementary Data 4) are involved in lignin biosynthesis needs further investigations, such as enzyme assays. Quantitative PCR with reverse transcription on selected genes confirmed the RNA-seq results (Extended Data Fig. 5). All members in the CAld5H family, encoding key enzymes for S monolignol biosynthesis, were expressed at an extremely low level in xylem (Extended Data Fig. 5). RNA-seq analysis indicated that A. spinulosa shares with gymnosperms and angiosperms a conserved set of enzymes responsible for the formation of G lignin, and the trace of S lignins in xylem is due to the low expression of CAld5H genes. In G. biloba, S lignin is also absent in wood but can be detected in cell cultures32. Traces of S lignin in several tissues and lower expression levels of CAld5Hs in A. spinulosa indicate that CAld5H genes may be repressed in this species.
NAC-domain TFs have been identified as key regulators in the formation of vascular tissues33,34. In the moss Physcomitrella patens, which lacks vasculature, the differentiation of both hydroid cells and stereid cells is regulated by NAC proteins, demonstrating that NAC proteins contribute to the evolution of both water-conducting and supporting cells in moss gametophytes35. In A. thaliana, VASCULAR-RELATED MAC-DOMAIN (VND) proteins regulate vessel differentiation36,37,38, and NAC SECONDARY WALL THICKENING PROMOTING FACTOR (NST)/SECONDARY WALL-ASSOCIATED NAC DOMAIN PROTEIN (SND) proteins regulate fibre differentiation39. In Pinus taeda, four VNSs (VND, NST/SND and SMB-related) were identified to regulate the formation of tracheids40, the only type of cells with secondary cell wall thickening in xylem for both support and transport in gymnosperms. Here we found seven SMB orthologues and two VND orthologues in the A. spinulosa genome (Supplementary Fig. 7). Among the nine NACs, the two VNDs (Aspi01Gene53944 and Aspi01Gene03119), which had the highest similarity with AtVND6, were the only NACs that were significantly upregulated in xylem compared with phloem, pith and sclerenchymatic belt (Supplementary Fig. 7 and Supplementary Data 5). These two VNDs are therefore probably key regulators for the formation of tracheids that serve both support and transport functions in A. spinulosa’s arborescent trunks.
Lignin biosynthetic and pathway genes in spores
We also detected a higher content of lignin, exclusively composed of the guaiacyl units, in mature spores (Fig. 2g). As in xylem, all CAld5H members had an extremely low transcript abundance in spores (Extended Data Fig. 5), which was in agreement with the scarcity of S lignin. RNA-seq showed more monolignol pathway gene members expressed in spores than in xylem (Fig. 3b and Supplementary Data 6), indicating that additional genes participate in lignin biosynthesis. Some catalytic steps in the monolignol pathway apparently recruited the same enzyme between xylem and spores, such as AspiCOMT2 in the 5-O-methylation of phenolic hydroxyl groups on the aromatic ring. However, some steps involved different enzyme family members between xylem and spores, such as AspiC4H2 in xylem and AspiC4H1 in spores.
(±)-Alsophilin, a pair of hispidin–piceatannol heterodimers
We used the widely targeted metabolome method41 to better capture the diversity of secondary metabolites in A. spinulosa (Supplementary Text). A total of 187 secondary metabolites were identified, including flavonoids, phenylpropanoids and alkaloids from stems and leaves (Supplementary Text and Supplementary Fig. 8). We then carried out extraction and isolation of metabolites from stems and obtained 11 purified compounds. Ten compounds were identified as known phenolics by comparing their spectroscopic data with those in previous reports (Supplementary Text). One new compound was named alsophilin, and its structure was characterized by mass spectrometry (MS) and NMR (Supplementary Text and Supplementary Fig. 9). On the basis of their electronic circular dichroism spectra, the compound was identified as a racemic pair of heterodimer enantiomers, (−)-alsophilin and (+)-alsophilin (Extended Data Fig. 6). Quantification of alsophilin in leaves and different parts of stems suggested that it was primarily synthesized in xylem (Fig. 3c).
The structure of alsophilin represents an unprecedented phenolic compound derived from hispidin and piceatannol, which belong to the styrylpyrone and stilbene families, respectively. Two kinds of plant type III polyketide synthases (PKS III), styrylpyrone synthase (SPS) and stilbene synthase (STS), were reported to catalyse hydroxycinnamoyl-CoA reactions to synthesize styrylpyrone and stilbene, respectively42,43. We performed blastp searches using Piper methysticum SPS42 and Vitis vinifera STS43 as the queries, and both identified the same 103 genes, encoding PKS III in the A. spinulosa genome (Supplementary Fig. 10). From these 103 genes, we selected 8 that were highly expressed in xylem to produce recombinant proteins for in vitro enzyme assays using both p-coumaroyl-CoA and caffeoyl-CoA as substrates. Seven enzymes had detectable activities. The recombinant proteins AspiPKS4, 5, 6 and 7 could catalyse p-coumaroyl-CoA to bis-noryangonin and catalyse the conversion of caffeoyl-CoA to hispidin (Extended Data Fig. 7), demonstrating that these four proteins perform SPS functions of adding two molecules of malonyl-CoA to the two substrates. Three proteins, AspiPKS1, 2 and 3, not only displayed SPS activities (converting p-coumaroyl-CoA to coumaroyltriacetic acid lactone and bis-noryangonin) but also had chalcone synthase (CHS) activities owing to their synthesis of naringenin chalcone (Fig. 3a and Extended Data Fig. 7). We could not detect any STS activities for piceatannol synthesis. It is possible that Escherichia coli recombinant proteins lack post-translational modification as reported to be required for PKS activities44. A. spinulosa has more PKS III members than A. thaliana, implicating the abundance of related metabolites in A. spinulosa. We detected three AspiPKSs that had both SPS and CHS activities, supporting the notion that many enzymes are promiscuous45. It is accepted that gene duplication followed by sequence divergence is a key evolutionary mechanism to generate a new or specific enzyme functions45. Among the PKS III enzymes, STSs seem to have evolved from CHSs several times independently43. The evolution of PKS proteins in ferns needs further investigation.
The cross-coupling of hispidin and piceatannol probably requires an oxidase, many of which are available for oxidizing phenolics in lignification. Among the 988 DEGs in xylem (Supplementary Data 2), 17 genes encoded oxidases, including peroxidases and polyphenol oxidases, and are the prime candidates for future characterizations (Fig. 3d).
Resequencing of A. spinulosa populations
Genetic variation and population structure
To explore the genetic diversity and population structure, we resequenced 107 diverse A. spinulosa accessions from nine locations (Fig. 4a and Supplementary Data 7) and identified 93.86 million high-confidence variable sites, including 86,926,221 single nucleotide polymorphisms (SNPs), 3,657,912 insertions and 3,259,116 deletions, averaging 10.91 variants per kb (Supplementary Table 12). Our phylogenetic analysis clustered 107 accessions into six distinct groups (Fig. 4b). The population structures generated by phylogenetic analysis were supported by principal component analysis (PCA) and admixture analysis (Fig. 4c,d). A couple of intraspecific introgression events were detected; for instance, some individuals from Guangxi showed mixed components from Hainan and Xizang (Fig. 4d).
The ratios of non-synonymous to synonymous SNPs in these populations ranged from 1.43 to 1.75, and the nucleotide diversities (π) ranged from 6.46 × 10−5 to 6.29 × 10−4 (Supplementary Tables 13 and 14). The Yunnan population has the highest genetic diversity (π = 6.29 × 10−4 in Yunnan versus 1.42 × 10−4 on average in the other populations), suggesting that Yunnan province in China is probably a centre of diversity for this species and where future conservation efforts could focus.
Evolutionary history and selective sweeps
We investigated the demographic history of A. spinulosa by calculating historical effective population size (Ne) and identified two bottlenecks, occurring at about 35.6–34.5 and 2.5–0.7 Ma (Fig. 4e).
We identified 225.23 Mb of selectively swept genomic regions using θπ, Tajima’s D and composite likelihood ratio (CLR) analyses. These regions were randomly distributed across 69 chromosomes in A. spinulosa and contained 2,553 protein-coding genes. Functional annotation using GO showed that these genes were significantly enriched in a series of basic biological processes (q < 0.05), including phosphatidate phosphatase activity, glucose-6-phosphate dehydrogenase activity, mitochondrial genome maintenance and regulation of DNA recombination (Extended Data Fig. 8 and Supplementary Table 15). Three significantly enriched KEGG pathways were regulation of lipolysis in adipocytes, glutathione metabolism and glycerolipid metabolism (Extended Data Fig. 8 and Supplementary Table 15). To what extent these selectively swept genes contribute to adaptative evolution in A. spinulosa awaits future studies.
To summarize, in this study we assembled the genome of A. spinulosa at the chromosome level. Genome analyses demonstrate that its large genome may be due to two rounds of WGD and an abundance of TEs. Synteny has been remarkably conserved despite the antiquity of WGD. Characterization of secondary metabolites identified abundant phenylpropanoid-based compounds in xylem, including lignin, alsophilin and flavonoids. Lignin is an essential component to increase the stiffness and strength of plant cell walls and provides waterproofing to the cell wall. G lignins are mainly deposited in gymnosperm tracheids for both support and transport and in angiosperm vessels for transport31,46. Accumulations of G lignins in tracheids of A. spinulosa, plus the detailed cytological observation of tracheid patterning in xylem, suggest that G lignins contribute to the function of tracheids in both support and transport. We identified two VND genes as possible key regulators for secondary wall formation and G lignin biosynthesis in tracheids, providing the molecular basis for tracheid formation in A. spinulosa. Alsophilin is a phenolic heterodimer of hispidin and piceatannol, and in vitro assays showed that it had antioxidant activities (Supplementary Text and Extended Data Fig. 9). We found that alsophilin, hispidin and piceatannol were primarily synthesized in xylem, of which piceatannol has been reported incorporated into the lignins in palm47. On the basis of our RNA-seq and recombinant protein assays, we were able to characterize some of the pathway genes leading to these metabolites. Abundant enzyme members, including PKS III, cytochrome P450 monooxygenases and oxidases (laccase and peroxidase), were identified in the A. spinulosa genome, which might suggest that A. spinulosa could be a valuable resource for natural product discovery. Lastly, demographic history inferred from genome resequencing identified two genetic bottlenecks, resulting in a rapid demographic decline of tree ferns. Together, the A. spinulosa genome provides a unique reference for inferring the history of genetic diversity, secondary metabolite biosynthesis and evolution of tree ferns, for better protection and application of tree ferns in the future.
Young leaves were collected from an A. spinulosa tree in the National Germplasm Resources Center (29.90° N, 103.14° E) in Hongya County, Sichuan, China. DNA was extracted using a CTAB procedure48. For SMRT long-read sequencing, five 20-kb DNA insert libraries were constructed using a SMRTbell Template Prep Kit (PacBio) and sequenced on a PacBio sequel I/II. For Illumina sequencing, two short-read libraries (inserts of 270 bp and 500 bp) were constructed using TruSeq DNA Sample Prep Kits (Illumina) and 150 bp pair-end sequenced on the Illumina HiSeq X-10. Five Hi-C libraries49 were sequenced on an Illumina Novaseq 6000 with 150-bp paired-end reads.
PacBio read self-correction was performed using Canu (v.1.9)50 with the following parameters: -correct; saveOverlaps, true; minMemory, 50G; batMemory, 200G; genomeSize, 7g. Corrected PacBio data were assembled into contigs using SmartDenovo (https://github.com/ruanjue/smartdenovo). Hi-C reads were aligned to the contig assembly through Juicer51. Contigs were mapped to pseudochromosomes using the 3D-DNA pipeline52. Chromosome-length scaffolds were adjusted manually with Juicebox51. To improve the assembly, we used BWA-MEM53 to map Illumina DNA reads to the genome and used Samtools54 to sort BAM files. The UnifiedGenotyper module of Genome Analysis Toolkit (GATK)55 was used to correct SNPs and indels of the long-read assembly.
Illumina genomic and RNA-seq reads were aligned to the genome using BWA-MEM53 and HISAT2 (ref. 56), respectively, to calculate mapping rate. The LTR assembly index10 was used to assess continuity. We also performed BUSCO11 evaluation to examine completeness of the assembly with the Eukaryota_odb10 database.
RNA-seq, ISO-seq and small RNA-seq
Tissues, including leaf, stem and sorus at three developmental stages, and gametophyte cultured from spores57 were collected from three individual trees as biological replicates. Tissues of pith, phloem, xylem and sclerenchymatic belt in the stems were further separated. Total RNAs were extracted using CTAB58. RNA-seq libraries were constructed using the NEBNext Ultra RNA Library Prep Kit for Illumina (NEB) and sequenced on an Illumina HiSeq 4000 with a read length of 150 bp at both sides. DEGs were identified using DESeq2 (ref. 59). Quantitative PCR with reverse transcription was performed60 with specific primers (Supplementary Table 16). Three ISO-seq libraries of 1–2 kb, 2–3 kb and 3–6 kb were constructed using the RNAs of leaves and stems61 and sequenced on a PacBio Sequel. Three small RNA libraries were constructed using total RNAs from young leaves to identify microRNAs (Supplementary Text).
Tandem Repeats Finder v.4.09 (ref. 62) was used to scan the genome for tandem repeats with a period size >50 bp. We applied a combination of de novo and homology-based approaches at DNA and protein levels for TEs. A de novo repeat library was constructed using RepeatModeler v.2.0.1 (ref. 63) with a parameter of LTRStruct. RepeatMasker v.4.1.0 (ref. 64) was used to map our assembly against the TE sequences in the repeat library and the Repbase v.21.12 (ref. 65) database to classify TEs. WU-BLASTX was run against the TE protein database in RepeatProteinMask v.4.0.7 (ref. 64) to identify TEs at the protein level.
Annotation was conducted through homology-based, transcriptome-based and ab initio prediction methods. Homologies from six species (A. filiculoides17, S. cucullata17, S. moellendorffii18, S. tamariscina66, Ceratopteris richardii67 and Adiantum capillus-veneris L.) were used as protein evidence for predicted gene sets using GeneWise v.2.4.1 (ref. 68). Transcriptome data including RNA-seq and ISO-seq reads were mapped using HISAT2 (ref. 56) and minimap2 (ref. 69). Ab initio gene prediction was performed with AUGUSTUS, trained by the transcriptome data. The Geta pipeline (https://github.com/chenlianfu/geta) was used to integrate annotation from all homology-based, transcriptome-based and ab initio predictions to generate a comprehensive protein-coding gene set. Genes without support from hidden Markov models (HMMs), transcriptome prediction and homologous prediction were removed. Finally, a non-redundant, consensus protein-coding gene set was constructed. Additional gene functional annotation was performed by searching the NCBI nr, Swiss-Port, KOG, eggNOG70, InterPro, Pfam, GO and KEGG databases.
Young leaves (~500 mg) were collected from three trees for WGBS. Genomic DNA was fragmented into 300 bp, end-repaired, A-tailed and ligated to methylated adapters. DNA fragments were size-selected (350–500 bp), treated with bisulfite and amplified by PCR. After purification, three WGBS libraries were sequenced on an Illumina HiSeq X-10 with 150-bp pair-end reads, generating 833.13 Gb of clean data. Clean reads were mapped using Bismark v.16.3 (ref. 71) (bismark -N -1 -2 -un --bowtie2 --path_to_bowtie --bam --samtools_path -o). Telomeres and centromeres were identified72,73. The number of methylated cytosines (CG-type, CHG-type and CHH-type) in the genome, repeat regions and gene bodies was normalized as methylation level values.
Eleven species were selected to construct a phylogenetic tree with A. spinulosa: two angiosperms (Amborella trichopoda74 and A. thaliana), two gymnosperms (G. biloba75 and Gnetum montanum76), two ferns (A. filiculoides and S. cucullata17), one lycophyte (S. tamariscina66), three bryophytes (P. patens77, Anthoceros angustus78 and Marchantia polymorpha79) and one charophyte (Chara braunii80). Protein sequences were filtered by removing short sequences (less than 50 amino acids) and choosing the longest isoform to represent each protein. OrthoFinder software81 (parameters ‘-M msa -S diamond’) was employed to cluster gene families. Single-copy orthologues were identified and used in the phylogenetic analysis. The single-copy genes were aligned by MAFFT82 and trimmed by trimAl83, and a maximum likelihood phylogenetic tree was constructed using modeltest-ng84 and RAxML-ng85, with C. braunii as the outgroup. The phylogenetic tree was visualized by iTOL86.
To model gene family expansion and contraction across the phylogeny, we used maximum likelihood in CAFE87 with a cut-off P value of 0.05. We used r8s88 to obtain the ultrametric tree with the following constraints: (1) 330.9–365 Ma for seed plants89, (2) 197.5–246.5 Ma for angiosperms89, (3) 91.3–98.8 Ma for Salviniales90, (4) 281.4–287.5 Ma for Salviniales + Cyatheales90 and (5) a fixed age for land plants at 500 Ma89.
Gene family analysis
We combined Hmmer and Blastp to identify gene family members. The HMM files of gene families from the Pfam protein family database were used to search genes in A. spinulosa using HMMER91. High-quality protein hits with an e value cut-off of 1 × 10−20 were aligned through MUSCLE92 to construct a specific HMM file for A. spinulosa using HMMER. This HMM file was employed to search the genome again to obtain proteins with an e value lower than 0.01. BLASTP was applied for the query proteins (Supplementary Table 17) to scan for homologues (e = 1 × 10−10), and RAxML93 was applied to construct phylogenetic trees. The candidate proteins were examined to confirm corresponding domains using Pfam, SMART and NCBI Conserved Domains databases.
To assess the history of WGD in A. spinulosa, an initial Ks distribution was obtained using a whole-paranome approach where genes were first clustered, followed by pairwise comparison and Ks estimation within clusters. Whole-paranome Ks estimation and subsequent mixture modelling were performed with the WGD package using the commands ksd and mix94.
Synteny was assessed using MCSCANX95 to identify collinear blocks of gene pairs. The resulting syntenic blocks were filtered by median Ks using a Python script to select collinear gene pairs that result from a specific duplication.
To place the inferred WGD events onto a phylogeny, fern transcriptomes were selected on the basis of their phylogenetic relatedness to A. spinulosa. Paired-end Illumina reads were from the Sequence Read Archive for Vandenboschia striata, Schizaea dichotoma, Azolla pinnata, Plagiogyria japonica, Dicksonia antarctica, Sphaeropteris lepifera, Gymnosphaera podopylla and Gymnosphaera gigantea96,97. The reads were assembled using SOAPdenovo-Trans98, and open reading frames were identified in TransDecoder (https://github.com/TransDecoder/TransDecoder). Multiple isoforms were collapsed using CD-HIT99 (with a similarity threshold of 99%), followed by clustering and gene tree construction using OrthoFinder81 (‘-M msa’ option).
Phylogenetic assessment was conducted by gene-tree species-tree reconciliation using MAPS100. An initial analysis of gene trees was produced by OrthoFinder. Multiple simulations were run using the simulateGeneTrees.3.0.pl script included with MAPS. For gene tree simulation, an ultra-metric species tree containing taxa from OrthoFinder was generated using the R package ape101. Node ages were calibrated using maximum and minimum ages22,102. Next, prior estimates of background rates of gene duplication and loss were obtained using R WGDgc103. Finally, 1,000 trees were simulated for the following scenarios: (1) no shared WGDs (null simulation) and (2) a single WGD in both Cyatheales and Cyatheaceae (positive simulation). Following the simulation, 100 randomly resampled sets of 200 gene trees were created for each scenario and subjected to MAPS. This method artificially inflates the number of subtrees containing a WGD near the root (Z. Li, personal communication), so a separate analysis was run with a reduced subset of taxa to resolve the WGD at the base of the Cyatheales. Transcriptomic sequences from V. striata, S. dichotoma, P. japonica, D. antarctica and A. spinulosa were used to build gene trees in OrthoFinder and subjected to MAPS as well as the null and positive simulations. A third analysis was run using V. striata, S. dichotoma, A. pinnata, P. japonica, D. antarctica and G. gigantea in place of A. spinulosa to ensure that the older Cyatheales event could still be detected with altered sampling of Cyatheaceae (Supplementary Fig. 11). Final comparisons of the experimental and simulated results were assessed for significance (Fischer’s exact test in R).
Differential expression of homoeologous genes was analysed using the RNA-seq data from four tissues: stem, leaf, sorus and gametophyte (Supplementary Text).
Substitution rates in Cyatheales were evaluated using protein-coding genes from A. spinulosa and transcriptomes of other Cyatheales genera, six representatives from the remaining leptosporangiate orders, and one from the eusporangiate order Marattiales104,105. The transcriptomes were assembled by Trinity106, and redundant sequences were removed by CD-HIT99. OrthoFinder81 was used to identify orthogroups. In each inferred orthogroup, we removed taxa with more than one sequence, probably due to gene duplication. We only analysed orthogroups that contained sequences longer than 300 bp and covered more than 75% of the taxon sampling. Each orthogroup was aligned on the basis of amino acid sequences using MAFFT82 (‘--maxiterate 16 --globalpair’). PAML107 was then used to detect substitution rate changes in Cyatheales. The input topology for baseml analyses was derived from PPG 1 (ref. 3). The significance of a rate change was inferred by a likelihood ratio test between two baseml models. One was set under a global clock with one rate, and another was under a local clock with two rates in which Cyatheales was set to have a different rate.
Light microscopic imaging
Four tissues (pith, sclerenchymatic belt, phloem and xylem) were separated from fresh stems and cut into pieces 1.5–2 cm long. The materials were boiled in water (20 min) and then soaked in 10% nitric acid and 10% chromic acid (v/v = 1:1) for 16 h to dissociate the cells. The mix was filtered through 200-mesh nylon and washed twice with dH2O. The materials were pounded by a glass rod and stored in 50% ethanol. The material was stained with 1% safranine for 2 min, washed with dH2O and observed under a light microscope (Olympus BX51).
SEM, TEM and microCT imaging
Fresh A. spinulosa stems were cut to proper size and fixed in 0.1 M phosphate buffer (pH 7.4) containing 4% (v/v) glutaraldehyde for 4 h at room temperature. The samples were washed three times with 0.1 M phosphate buffer and post-fixed with 2% osmium tetroxide (w/v) plus 1.5% potassium ferricyanide (w/v) in phosphate buffer for 2 h at 4 °C. Following three rounds of water washing, in-bloc staining with 2% uranyl acetate (w/v) was performed overnight at 4 °C. The samples were dehydrated through a graded ethanol series.
For SEM observation, the samples were dried in a critical point dryer (CPD300, Leica) and imaged in a ThermoFisher Quanta 450. For TEM observation, the samples were embedded in fresh resin and polymerized at 65 °C for 24 h. Sections (70 nm) were made using a Leica UC7 ultramicrotome and post-stained with uranyl acetate and lead citrate. Grids were imaged at 80 kV in a JEOL Jem-1400 TEM using a CMOS camera (XAROSA, EMSIS). The polymerized resin block was also used for microCT (SkyScan 1272, Bruker) imaging, and the microCT data were processed using Amira (v.2020.3) software.
Lignin content and composition determination
Samples were ground, lyophilized and extracted successively with chloroform/methanol (2:1, v/v), methanol and water at room temperature to remove extractives. The remaining cell wall residues were again lyophilized. Lignin content was determined by Klason108, and monolignol composition was determined by thioacidolysis109. Lignin structures were analysed by NMR110,111.
Metabolite characterizations and biological activity assays
Leaves and stems at three developmental stages were collected from three individual trees for a metabolomic screen41. Stem powders were extracted with a series of solvents, followed by column chromatography. Eleven purified metabolites were tested for antioxidant activities, in vitro cytotoxicity and anti-inflammation. The details of the metabolite characterization and biological activity assays are described in the Supplementary Text.
Quantification of alsophilin, hispidin, resveratrol and piceatannol
Air-dried powders (60 mg, <60 mesh) of leaves, xylem, phloem, sclerenchymatic belt and pith were extracted with 400 µl of methanol by ultrasonication for 15 min. After filtering (0.22 µm), 10 µl of filtrate was analysed by UPLC (Waters) and MS (Thermo-Fisher) on an ACQUITY UPLC column (2.1 mm × 50 mm, C18) with a flow rate of 0.4 ml min−1 and a gradient of solvent A (acetonitrile) and solvent B (H2O). Alsophilin was detected under a t-SIM model (gradient: 0 min, 10% A; 6 min, 90% A; 7 min, 10% A; 9 min, 10% A; selected positive ion at m/z 163.0386). Hispidin, resveratrol and piceatannol were detected under a PRM model (gradient: 0 min, 10% A; 7 min, 90% A; 9 min, 10% A; selected negative ion at m/z 159.0440, 185.0598 and 159.0440, respectively).
The full-length coding regions of PKS genes were cloned into pGEXKG-1 for protein expression in E. coli BL21 (DE3). The primers are shown in Supplementary Table 16. The enzyme assays were performed in a 100 μl volume containing 1 μl of 10 mM p-coumaroyl-CoA or caffeoyl-CoA, 3 μl of 10 mM malonyl-CoA, 90 μl of 50 mM Tris-HCl buffer (pH 7.5) and purified PKS enzymes at a final concentration of 1 mg ml−1. The reactions were incubated overnight at 30 °C or 37 °C and stopped by the addition of methanol to 50%. The products were analysed by LC–MS on a LCMS-2020 (Shimadzu) with a Shim-pack GIST column (5 μm, 2.1 mm × 100 mm) monitor at 310 nm and 30 °C, in negative ionization mode with a full scan range of 100–500 m/z. The mobile phases were solvent A (water) and solvent B (methanol), with a flow rate of 0.3 ml min−1 and a gradient of 0 min, 10% B; 10 min, 30% B; 20 min, 60% B; 30 min, 100% B.
Resequencing and population analysis
Read mapping and variant calling
We collected leaves from 107 A. spinulosa trees from nine populations in Southeast Asia, with A. costularis as the outgroup. DNA libraries with 200–400-bp inserts were constructed and pair-end sequenced on MGISEQ2000. After quality control by FastQC, the raw reads were filtered to remove adaptors, contaminants and low-quality reads using Trimmomatic112. We generated 8,755.59 Gb of sequence, with an average depth of 13.2× genome coverage per accession. The clean reads were mapped using Bowtie2 (ref. 113) with the default parameters. SAMtools54 was used to remove duplicate reads. We evaluated the rate of uniquely aligned reads that were obtained from BWA114. We used Realigner Target Creator and Indel Realigner from the GATK package55 for global realignment of reads around indels from the sorted BAM files. HaplotypeCaller was used to estimate the SNPs and indels for putative diploids using the default parameters. The distribution of calling depths (DP) of each raw variant was estimated as a criterion for variant filtering to reduce false positives. Low depths and repetitive variants were removed from the raw VCF file if they had DP < 2 or DP > 45, minQ < 30. Variants with more than 15% missing data were removed. These filtering strategies reduced the raw unfiltered set of 160,416,579 variants (SNPs and indels) to a working set of 93.86 million. SnpEff (v.3.6c)115 was used to assign variants on the basis of gene models from A. spinulosa annotation. The variant sites were annotated as SNPs and indels, as well as intergenic and genic regions (including synonymous, non-synonymous, intronic, upstream and downstream variants).
Genome-wide genetic diversity estimation
To identify selective sweeps, we calculated the genome-wide distribution of Tajima’s D and nucleotide diversity θπ values using VCFtools116 with a 20-kb sliding window. SweeD117 analysis was conducted on the basis of the CLR to identify selected loci, and the CLR of each sliding window with a size of 20 kb was calculated. Both CLR and θπ analysis used the top 5% scoring regions. Tajima’s D used the top and bottom 2.5% scoring regions as cut-off values to infer candidate selective sweeps. Regions that were supported by both approaches were considered high-confidence.
Bi-allelic and polymorphic SNPs (58,177,625) were used to reconstruct phylogenetic relationships among the 107 accessions. Before tree construction, we filtered and pruned the SNPs with minor allele frequency < 0.2, missing rate > 0.15 and linkage disequilibrium threshold = 0.2. Finally, 263,712 SNPs located in single-copy genes were selected for constructing the tree. The multiple consensus sequences were aligned using MAFFT82. Maximum likelihood trees were constructed using RAxML93. iTOL86 was used to visualize the tree.
The GCTA software118 was employed to conduct PCA on 263,712 filtered variants. The input PLINK binary files were transformed from the filtered VCFs file using VCFtools116 and PLINK119. The top three principal components were used for assigning the 107 accessions and downstream population structure.
Population genetic structure
We used Admixture120 to infer ancestral population stratification among the 107 accessions. The optimal ancestral population structure was estimated from the same variant set with STRUCTURE121 using ancestral population sizes K = 2–9 and choosing the population with the lowest cross-validation error. The standard errors were estimated using bootstrapping (100 replicates) during the admixture analyses.
The demographic history was queried on the basis of the site-frequency spectrum (SFS) inferred from alignment of population resequencing. Low-quality mapping was first removed with the parameters (‘-only_proper_pairs 1 -uniqueOnly 1 -remove_bads 1 -minQ 20 -minMap 30’) implemented in ANGSD122. The site allele-frequency likelihood was calculated using -doSaf for each resequenced accession on the basis of individual genotype likelihoods. We used the realSFS with the expectation-maximization algorithm to calculate the folded SFS on the basis of the estimation of maximum likelihood. After that, stairway-plot-2 (ref. 123) was used to present the historical effective population size (Ne) with an estimated mutation rate of 1.77 × 10−9 per generation and a 100-year generation time, derived from previous studies124,125,126.
Further information on research design is available in the Nature Research Reporting Summary linked to this article.
The genome assemblies of A. spinulosa have been deposited to the Genome Sequence Archive at the National Genomics Center under BioProject no. PRJCA006485. Whole-genome sequencing, RNA-seq, resequencing, WGBS and small RNA sequencing data were deposited to the GSA database (http://gsa.big.ac.cn/) under accessions CRA005445, CRA005406, CRA005447, CRA005463, CRA005407 and CRA005430. The genome assembly and annotation files are available at Figshare (https://doi.org/10.6084/m9.figshare.19075346), and all phylogenetic trees in newick formats and with bootstrap values are deposited in Figshare (https://doi.org/10.6084/m9.figshare.19125641). Source data are provided with this paper.
All custom codes are available for research purposes from the corresponding authors upon request.
Delwiche, C. & Cooper, E. The evolutionary origin of a terrestrial flora. Curr. Biol. 25, R899–R910 (2015).
Sarkanen, K. V. & Ludwig, C. H. Lignins: Occurrence, Formation, Structure and Reactions (Wiley-Interscience, 1971).
Schuettpelz, E., Schneider, H., Smith, A. R. & Kessler, M. A community-derived classification for extant lycophytes and ferns. J. Syst. Evol. 54, 563–603 (2016).
Clark, J. et al. Genome evolution of ferns: evidence for relative stasis of genome size across the fern phylogeny. N. Phytol. 210, 1072–1082 (2016).
Dong, S. Y. & Zuo, Z. Y. On the recognition of Gymnosphaera as a distinct genus in Cyatheaceae. Ann. Mo. Bot. Gard. 103, 1–23 (2018).
Nakato, N. Cytological studies on the genus Cyathea in Japan. J. Jpn. Bot. 64, 142–146 (1989).
Longtine, C. & Tejedor, A. Antimicrobial activity of ethanolic and aqueous extracts of medicinally used tree ferns Alsophila cuspidata and Cyathea microdonta. Acta Bot. Malacit. 42, 119 (2017).
Gong, J., Chen, F. & Li, S. Primary discussion on the bacteriostatic activity of Alsophila spinulosa leaves and stems. J. Anhui Agric. Sci. 35, 10566–10568 (2007).
Cheng, Y. & Chen, F. Z. Isolation of three chemical constituents from Alsophila spinulosa stalks for the first time. Med. Plant 2, 5–7 (2011).
Ou, S., Chen, J. & Ning, J. Assessing genome assembly quality using the LTR assembly index (LAI). Nucleic Acids Res. 46, e126 (2018).
Simão, F. A., Waterhouse, R. M., Ioannidis, P., Kriventseva, E. V. & Zdobnov, E. M. BUSCO: assessing genome assembly and annotation completeness with single-copy orthologs. Bioinformatics 31, 3210–3212 (2015).
Szovényi, P., Gunadi, A. & Li, F. W. Charting the genomic landscape of seed-free plants. Nat. Plants 7, 554–565 (2021).
Zemach, A., Mcdaniel, I. E., Silva, P. & Zilberman, D. Genome-wide evolutionary analysis of eukaryotic DNA methylation. Science 328, 916–919 (2010).
Bartels, A. et al. Dynamic DNA methylation in plant growth and development. Int. J. Mol. Sci. 19, 2144 (2018).
Takuno, S., Ran, J. H. & Gaut, B. S. Evolutionary patterns of genic DNA methylation vary across land plants. Nat. Plants 2, 15222 (2016).
Bewick, A. J. et al. On the origin and evolutionary consequences of gene body DNA methylation. Proc. Natl Acad. Sci. USA 113, 9111–9116 (2016).
Li, F.-W. et al. Fern genomes elucidate land plant evolution and cyanobacterial symbioses. Nat. Plants 4, 460–472 (2018).
Banks, J. A. et al. The Selaginella genome identifies genetic changes associated with the evolution of vascular plants. Science 332, 960–963 (2011).
Evkaikina, A. I. et al. The Huperzia selago shoot tip transcriptome sheds new light on the evolution of leaves. Genome Biol. Evol. 9, 2444–2460 (2017).
Li, F.-W. et al. Anthoceros genomes illuminate the origin of land plants and the unique biology of hornworts. Nat. Plants 6, 259–272 (2020).
Li, L. et al. Arabidopsis thaliana NOP10 is required for gametophyte formation. J. Integ. Plant Biol. 60, 723–736 (2018).
Loiseau, O. et al. Slowly but surely: gradual diversification and phenotypic evolution in the hyper-diverse tree fern family Cyatheaceae. Ann. Bot. 125, 93–103 (2020).
Korall, P., Schuettpelz, E. & Pryer, K. M. Abrupt deceleration of molecular evolution linked to the origin of arborescence in ferns. Evolution 64, 2786–2792 (2010).
Sigel, E. M., Der, J. P., Windham, M. & Pryer, K. M. Expression level dominance and homeolog expression bias in recurrent origins of the allopolyploid fern Polypodium hesperium. Am. Fern J. 109, 224–247 (2019).
Wu, J. et al. Homoeolog expression bias and expression level dominance in resynthesized allopolyploid Brassica napus. BMC Genomics 19, 586 (2018).
Buggs, R. J. et al. Tissue-specific silencing of homoeologs in natural populations of the recent allopolyploid Tragopogon mirus. N. Phytol. 186, 175–183 (2010).
Logan, K. J. & Thomas, B. A. Distribution of lignin derivatives in plants. N. Phytol. 99, 571–585 (1985).
Bunzel, M., Schüssler, A. & Saha, G. T. Chemical characterization of Klason lignin preparations from plant-based foods. J. Agric. Food Chem. 59, 12506–12513 (2011).
Weng, J. K., Akiyama, T., Bonawitz, N. D., Li, X. & Chapple, C. Convergent evolution of syringyl lignin biosynthesis via distinct pathways in the lycophyte Selaginella and flowering plants. Plant Cell 22, 1033–1045 (2010).
Weng, J. K., Akiyama, T., Ralph, J. & Chapple, C. Independent recruitment of an O-methyltransferase for syringyl lignin biosynthesis in Selaginella moellendorffii. Plant Cell 23, 2708–2724 (2011).
Zhou, C., Li, Q., Chiang, V. L., Lucia, L. A. & Griffis, D. P. Chemical and spatial differentiation of syringyl and guaiacyl lignins in poplar wood via time-of-flight secondary ion mass spectrometry. Anal. Chem. 83, 7020–7026 (2011).
Uzal, E. N., Ros, L., Pomar, F., Bernal, M. A. & Barceló, A. The presence of sinapyl lignin in Ginkgo biloba cell cultures changes our views of the evolution of lignin biosynthesis. Physiol. Plant. 135, 196–213 (2010).
Ohtani, M., Akiyoshi, N., Takenaka, Y., Sano, R. & Demura, T. Evolution of plant conducting cells: perspectives from key regulators of vascular cell differentiation. J. Exp. Bot. 68, 17–26 (2017).
Fukuda, H. & Ohashi-Ito, K. Vascular tissue development in plants. Curr. Top. Dev. Biol. 131, 141–160 (2019).
Xu, B. et al. Contribution of NAC transcription factors to plant adaptation to land. Science 343, 1505–1508 (2014).
Kubo, M. et al. Transcription switches for protoxylem and metaxylem vessel formation. Genes Dev. 19, 1855–1860 (2005).
Yamaguchi, M. et al. VASCULAR-RELATED NAC-DOMAIN6 and VASCULAR-RELATED NAC-DOMAIN7 effectively induce transdifferentiation into xylem vessel elements under control of an induction system. Plant Physiol. 153, 906–914 (2010).
Tan, T. T. et al. Transcription factors VND1–VND3 contribute to cotyledon xylem vessel formation. Plant Physiol. 176, 773–789 (2018).
Zhong, R., Demura, T. & Ye, Z. H. SND1, a NAC domain transcription factor, is a key regulator of secondary wall synthesis in fibers of Arabidopsis. Plant Cell 18, 3158–3170 (2006).
Akiyoshi, N. et al. Involvement of VNS NAC-domain transcription factors in tracheid formation in Pinus taeda. Tree Physiol. 40, 704–716 (2020).
Chen, W. et al. Genome-wide association analyses provide genetic and biochemical insights into natural variation in rice metabolism. Nat. Genet. 46, 714–721 (2014).
Pluskal, T. et al. The biosynthetic origin of psychoactive kavalactones in kava. Nat. Plants 5, 867–878 (2019).
Parage, C., Tavares, R., Réty, S., Baltenweck-Guyot, R. & Hugueney, P. Structural, functional, and evolutionary analysis of the unusually large stilbene synthase gene family in grapevine. Plant Physiol. 160, 1407–1419 (2012).
Gao, L., Cai, M., Shen, W., Xiao, S. & Zhang, Y. Engineered fungal polyketide biosynthesis in Pichia pastoris: a potential excellent host for polyketide production. Microb. Cell Fact. 12, 77 (2013).
Luca, V. D. & Mandrich, L. Enzyme promiscuous activity: how to define it and its evolutionary aspects. Protein Pept. Lett. 27, 400–410 (2020).
Myburg, A. A., Lev-Yadun, S. & Sederoff, R. R. Xylem Structure and Function (eLS, 2013).
Río, J. D., Rencoret, J., Gutiérrez, A., Kim, H. & Ralph, J. Hydroxystilbenes are monomers in palm fruit endocarp lignins. Plant Physiol. 174, 2072–2082 (2017).
Porebski, S., Bailey, L. G. & Baum, B. R. Modification of a CTAB DNA extraction protocol for plants containing high polysaccharide and polyphenol components. Plant Mol. Biol. Rep. 15, 8–15 (1997).
Xie, T. et al. De novo plant genome assembly based on chromatin interactions: a case study of Arabidopsis thaliana. Mol. Plant 8, 489–492 (2015).
Sergey et al. Canu: scalable and accurate long-read assembly via adaptive k-mer weighting and repeat separation. Genome Res. 27, 722–736 (2017).
Durand, N. et al. Juicer provides a one-click system for analyzing loop-resolution Hi-C experiments. Cell Syst. 3, 95–98 (2016).
Dudchenko, O. et al. De novo assembly of the Aedes aegypti genome using Hi-C yields chromosome-length scaffolds. Science 356, 92–95 (2017).
Li, H. Aligning sequence reads, clone sequences and assembly contigs with BWA-MEM. Preprint at arXiv https://arxiv.org/abs/1303.3997 (2013).
Li, H. et al. The sequence alignment/map format and SAMtools. Bioinformatics 25, 2078–2079 (2009).
Mckenna, A. et al. The Genome Analysis Toolkit: a MapReduce framework for analyzing next-generation DNA sequencing data. Genome Res. 20, 1297–1303 (2010).
Kim, D., Langmead, B. & Salzberg, S. L. HISAT: a fast spliced aligner with low memory requirements. Nat. Methods 12, 357–360 (2015).
Kuo, L.-Y. et al. Organelle genome inheritance in Deparia ferns (Athyriaceae, Aspleniineae, Polypodiales). Front. Plant Sci. 9, 486 (2018).
Lorenz, W. W., Yu, Y. S. & Dean, J. An improved method of RNA isolation from loblolly pine (P. taeda L.) and other conifer species. J. Vis. Exp. 36, 1751 (2010).
Love, M. I., Huber, W. & Anders, S. Moderated estimation of fold change and dispersion for RNA-seq data with DESeq2. Genome Biol. 15, 550 (2014).
Li, Q. et al. Down-regulation of glycosyltransferase 8D genes in Populus trichocarpa caused reduced mechanical strength and xylan content in wood. Tree Physiol. 31, 226–236 (2011).
Li, H., Chen, G., Pang, H., Wang, Q. & Dai, X. Investigation into different wood formation mechanisms between angiosperm and gymnosperm tree species at the transcriptional and post-transcriptional level. Front. Plant Sci. 12, 698602 (2021).
Gary, B. Tandem repeats finder: a program to analyze DNA sequences. Nucleic Acids Res. 27, 573–580 (1999).
Flynn, J. M., Hubley, R., Rosen, J., Clark, A. G. & Smit, A. F. RepeatModeler2 for automated genomic discovery of transposable element families. Proc. Natl Acad. Sci. USA 117, 201921046 (2020).
Tarailo‐Graovac, M. & Chen, N. Using RepeatMasker to identify repetitive elements in genomic sequences. Curr. Protoc. Bioinform. 25, 4.10.1–4.10.14 (2009).
Jurka, J. et al. Repbase Update, a database of eukaryotic repetitive elements. Cytogenet. Genome Res. 110, 462–467 (2005).
Xu, Z. et al. Genome analysis of the ancient tracheophyte Selaginella tamariscina reveals evolutionary features relevant to the acquisition of desiccation tolerance. Mol. Plant 11, 983–994 (2018).
Marchant, D. B., Sessa, E. B., Wolf, P. G., Heo, K. & Soltis, D. E. The C-Fern (Ceratopteris richardii) genome: insights into plant genome evolution with the first partial homosporous fern genome assembly. Sci. Rep. 9, 18181 (2019).
Birney, E., Clamp, M., & Durbin, R. GeneWise and Genomewise. Genome Res. 14, 988–995 (2004).
Li, H. Minimap2: fast pairwise alignment for long DNA sequences. Bioinformatics 34, 3094–3100 (2017).
Jaime, H. C. et al. eggNOG 5.0: a hierarchical, functionally and phylogenetically annotated orthology resource based on 5090 organisms and 2502 viruses. Nucleic Acids Res. 47, D309–D314 (2018).
Andrews, S. R. Bismark: a flexible aligner and methylation caller for bisulfite-seq applications. Bioinformatics 27, 1571–1572 (2011).
Zhang, J., Zhang, X., Tang, H., Zhang, Q. & Ming, R. Allele-defined genome of the autopolyploid sugarcane Saccharum spontaneum L. Nat. Genet. 50, 1565–1573 (2020).
Vanburen, R. et al. Single-molecule sequencing of the desiccation-tolerant grass Oropetium thomaeum. Nature 527, 508–511 (2015).
Amborella Genome Project. The Amborella genome and the evolution of flowering plants. Science 342, 1241089 (2013).
Liu, H. et al. The nearly complete genome of Ginkgo biloba illuminates gymnosperm evolution. Nat. Plants 7, 748–756 (2021).
Wan, T. et al. A genome for gnetophytes and early evolution of seed plants. Nat. Plants 4, 82–89 (2018).
Lang, D., Ullrich, K. K., Murat, F., Fuchs, J. & Rensing, S. A. The Physcomitrella patens chromosome-scale assembly reveals moss genome structure and evolution. Plant J. 93, 515–533 (2017).
Zhang, J., Fu, X. X., Li, R. Q., Zhao, X. & Chen, Z. D. The hornwort genome and early land plant evolution. Nat. Plants 6, 107–118 (2020).
Bowman, J. L., Kohchi, T., Yamato, K. T., Jenkins, J. & Schmutz, J. Insights into land plant evolution garnered from the Marchantia polymorpha genome. Cell 171, 287–304 (2017).
Nishiyama, T. et al. The chara genome: secondary complexity and implications for plant terrestrialization. Cell 174, 448–464.e424 (2018).
Emms, D. M. & Kelly, S. OrthoFinder: solving fundamental biases in whole genome comparisons dramatically improves orthogroup inference accuracy. Genome Biol. 16, 157 (2015).
Kazutaka, Katoh & Daron, Standley MAFFT multiple sequence alignment software version 7: improvements in performance and usability. Mol. Biol. Evol. 30, 772–780 (2013).
Capella-Gutierrez, S., Silla-Martinez, J. M. & Gabaldon, T. trimAl: a tool for automated alignment trimming in large-scale phylogenetic analyses. Bioinformatics 25, 1972–1973 (2009).
Darriba, D. et al. ModelTest-NG: a new and scalable tool for the selection of DNA and protein evolutionary models. Mol. Biol. Evol. 37, 291–294 (2020).
Kozlov, A. M., Darriba, D., Flouri, T., Morel, B. & Stamatakis, A. RAxML-NG: a fast, scalable, and user-friendly tool for maximum likelihood phylogenetic inference. Bioinformatics 35, 4453–4455 (2019).
Letunic, I. & Bork, P. Interactive Tree Of Life (iTOL) v5: an online tool for phylogenetic tree display and annotation. Nucleic Acids Res. 49, W293–W296 (2021).
Bie, T. D., Cristianini, N., Demuth, J. P. & Hahn, M. W. CAFE: a computational tool for the study of gene family evolution. Bioinformatics 22, 1269–1271 (2006).
Sanderson, M. J. r8s: inferring absolute rates of molecular evolution and divergence times in the absence of a molecular clock. Bioinformatics 19, 301–302 (2003).
Morris, J. L. et al. The timescale of early land plant evolution. Proc. Natl Acad. Sci. USA 115, E2274–E2283 (2018).
Testo, W. & Sundue, M. A 4000-species dataset provides new insight into the evolution of ferns. Mol. Phylogenet. Evol. 105, 200–211 (2016).
Eddy, S. R. & Pearson, W. R. Accelerated profile HMM searches. PLoS Comput. Biol. 7, e1002195 (2011).
Edgar, R. C. MUSCLE: multiple sequence alignment with high accuracy and high throughput. Nucleic Acids Res. 32, 1792–1797 (2004).
Stamatakis, A. RAxML version 8: a tool for phylogenetic analysis and post-analysis of large phylogenies. Bioinformatics 30, 1312–1313 (2014).
Zwaenepoel, A., Van de Peer, Y. & Hancock, J. wgd—simple command line tools for the analysis of ancient whole-genome duplications. Bioinformatics 35, 2153–2155 (2019).
Wang, Y. et al. MCScanX: a toolkit for detection and evolutionary analysis of gene synteny and collinearity. Nucleic Acids Res. 40, e49–e49 (2012).
Dong, S., Xiao, Y., Kong, H., Feng, C. & Kang, M. Nuclear loci developed from multiple transcriptomes yield high resolution in phylogeny of scaly tree ferns (Cyatheaceae) from China and Vietnam. Mol. Phylogenet. Evol. 139, 106567 (2019).
Hui, S. et al. Large scale phylogenomic analysis resolves a backbone phylogeny in ferns. Gigascience 7, 1–11 (2018).
Xie, Y. et al. SOAPdenovo-Trans: de novo transcriptome assembly with short RNA-Seq reads. Bioinformatics 30, 1660–1666 (2014).
Fu, L., Niu, B., Zhu, Z., Wu, S. & Li, W. CD-HIT: accelerated for clustering the next-generation sequencing data. Bioinformatics 28, 3150–3152 (2012).
Zheng, L., Tiley, G. P., Galuska, S. R., Reardon, C. R. & Barker, M. S. Multiple large-scale gene and genome duplications during the evolution of hexapods. Proc. Natl Acad. Sci. USA 115, 201710791 (2018).
Paradis, E. & Schliep, K. ape 5.0: an environment for modern phylogenetics and evolutionary analyses in R. Bioinformatics 35, 526–528 (2019).
Rothfels, C. et al. The evolutionary history of ferns inferred from 25 low‐copy nuclear genes. Am. J. Bot. 102, 1089–1107 (2015).
Rabier, C. E., Ta, T. & Ane, C. Detecting and locating whole genome duplications on a phylogeny: a probabilistic approach. Mol. Biol. Evol. 31, 750–762 (2014).
Wang, J. et al. Allopolyploid speciation accompanied by gene flow in a tree fern. Mol. Biol. Evol. 37, 2487–2502 (2020).
Qi, X., Kuo, L. Y., Guo, C., Li, H. & Ma, H. A well-resolved fern nuclear phylogeny reveals the evolution history of numerous transcription factor families. Mol. Phylogenet. Evol. 127, 961–977 (2018).
Grabherr, M. G., Haas, B. J., Yassour, M., Levin, J. Z. & Amit, I. Trinity: reconstructing a full-length transcriptome without10.1038/s41477-022-01146-6a genome from RNA-seq data. Nat. Biotechnol. 29, 644–652 (2013).
Yang, Z. PAML 4: a program package for phylogenetic analysis by maximum likelihood. Mol. Biol. Evol. 24, 1586–1591 (2007).
Sluiter, A. et al. Determination of Structural Carbohydrates and Lignin in Biomass NREL Laboratory Analytical Procedures (National Renewable Energy Laboratory, 2008).
Lapierre, C., Pollet, B. & Rolando, C. New insights into the molecular architecture of hardwood lignins by chemical degradative methods. Res. Chem. Intermediat. 21, 397–412 (1995).
Kim, H., Ralph, J. & Akiyama, T. Solution-state 2D NMR of ball-milled plant cell wall gels in DMSO-d 6. Org. Biomol. Chem. 8, 576–591 (2010).
Mansfield, S. D., Kim, H., Lu, F. & Ralph, J. Whole plant cell wall characterization using solution-state 2D NMR. Nat. Protoc. 7, 1579–1589 (2012).
Bolger, A. M., Marc, L. & Bjoern, U. Trimmomatic: a flexible trimmer for Illumina sequence data. Bioinformatics 30, 2114–2120 (2014).
Langmead, B. & Salzberg, S. L. Fast gapped-read alignment with Bowtie 2. Nat. Methods 9, 357–359 (2012).
Li, H. & Richard, D. Fast and accurate short read alignment with Burrows–Wheeler transform. Bioinformatics 25, 1754–1760 (2009).
Cingolani, P. et al. A program for annotating and predicting the effects of single nucleotide polymorphisms, SnpEff: SNPs in the genome of Drosophila melanogaster strain w1118; iso-2; iso-3. Fly 6, 80–92 (2012).
Danecek, P. et al. The variant call format and VCFtools. Bioinformatics 27, 2156–2158 (2011).
Pavlidis, P., Živkovic, D., Stamatakis, A. & Alachiotis, N. SweeD: likelihood-based detection of selective sweeps in thousands of genomes. Mol. Biol. Evol. 30, 2224–2234 (2013).
Yang, J., Lee, S. H., Goddard, M. E. & Visscher, P. M. GCTA: a tool for genome-wide complex trait analysis. Am. J. Hum. Genet. 88, 76–82 (2011).
Purcell, S. et al. PLINK: a tool set for whole-genome association and population-based linkage analyses. Am. J. Hum. Genet. 81, 559–575 (2007).
Alexander, D. H., Novembre, J. & Lange, K. Fast model-based estimation of ancestry in unrelated individuals. Genome Res. 19, 1655–1664 (2009).
Evanno, G. S., Regnaut, S. J. & Goudet, J. Detecting the number of clusters of individuals using the software STRUCTURE: a simulation study. Mol. Ecol. 14, 2611–2620 (2005).
Korneliussen, T. S., Albrechtsen, A. & Nielsen, R. ANGSD: analysis of next generation sequencing data. BMC Bioinform. 15, 356 (2014).
Liu, X. & Fu, Y. X. Stairway Plot 2: demographic history inference with folded SNP frequency spectra. Genome Biol. 21, 280 (2020).
Ash, J. Demography of Cyathea hornei (Cyatheacee), a tropical fern from Fiji. Aust. J. Bot. 35, 331–341 (1988).
Zhong, B., Fong, R., Collins, L. J., McLenachan, P. A. & Penny, D. Two new fern chloroplasts and decelerated evolution linked to the long generation time in tree ferns. Genome Biol. Evol. 6, 1166–1173 (2014).
Lynch, M. Evolution of the mutation rate. Trends Genet. 26, 345–352 (2010).
This work was supported by the Fundamental Research Funds of Chinese Academy of Forestry (grant no. CAFYBB2017ZY001 to Q.L.); the National Natural Science Foundation of China (grant no. 32071787 to Q.L.); start-up funding for polyploid poplar research from the Beijing Advanced Innovation Center for Tree Breeding by Molecular Design, Beijing Forestry University (to H.W.); CAMS Innovation Fund for Medical Sciences (grant no. CIFMS2021-I2M-1-029 to P.Z. and T.G.); PUMC Disciplinary Development of Synthetic Biology (grant no. 201920100801 to P.Z.); and the DOE Great Lakes Bioenergy Research Center (DOE BER Office of Science, grant no. DE-SC0018409 to J.R.). We acknowledge the research team of X. Chen and Q. Hou, Department of Pharmacology of our Institute, for the cytotoxic and anti-inflammation bioassays. We thank Y. Fang for providing the gene annotations in A. capillus-veneris. We also thank H. Liu, K. Dipak and S. Shi for helping in resequencing the sample collections, and Y. Cao (State Key Laboratory of Tree Genetics and Breeding, Chinese Academy of Forestry) and H. Zhang (the Core Facilities of Life Sciences at Peking University) for assistance with the microscopic observations.
The authors declare no competing interests.
Peer review information
Nature Plants thanks the anonymous reviewers for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
(a) Estimation of genome size and heterozygosity based on 23-mer frequency distribution analysis using the GenomeScope software. The genome of A. spinulosa was estimated as 6.23 Gb with the heterozygosity of 0.28%. (b) Assembly strategy of A. spinulosa genome. PacBio long reads were assembled into contigs by the Smartdenovo software. Illumina short reads were used to correct contigs. Hi-C-based scaffolding was generated using 3D-DNA pipeline, and 69 pseudo-chromosomes were obtained. The final chromosome-level assembled genome size was 6.23 Gb with scaffold N50 size of 92.48 Mb. (c) Genome-wide interaction heat map of Hi-C links among chromosome groups (69 chromosomes). Each chromosome has higher intensity of interactions with itself than any other chromosomes (Darker red color means stronger interactions).
Synteny was assessed using the MCSCANX program to identify collinear blocks of syntenic gene pairs. The resulting syntenic blocks were filtered by median Ks using a custom Python script to select collinear gene pairs that were the result of a specific duplication event. Blocks of syntenic genes show conservation of genes order following WGD. Synteny regions are color coded by Ks value.
(a) Summary of second MAPS analysis focusing on the WGD event common to all Cyatheales. Shaded area shows the standard deviation for gene tree simulations. The dark lines in the center of the shaded regions represent the average values for null and positive gene tree simulations. (b) GO enrichment of syntenic homoeologs. The first histogram shows GO enrichment of all syntenic pairs from the most recent WGD event (0.2<Ks<0.5) compared to genomic background. The second histogram shows GO enrichment of differentially expressed genes relative to a background of all syntenic gene pairs from the most recent WGD event. P-values were obtained using an one-sided hypergeometric test. (c) Gene pairs plotted according to log2 fold change (L2F) as calculated for gene 1 (x-axis) and gene 2 (y-axis) in DESeq2. Each point represents one gene pair with pairs colored according to the difference in L2F values (diffL2F = |L2F_1 - L2F_2|) to visualize the arbitrary cutoffs of diffL2F = 2 and diffL2F = 4. Blue dashed lines represent zero difference expression between homoeologs. St: stem; So: sorus; Le: leaf; Ga: gametophyte. (d) Upset plot showing overlap in the number of homoeologous gene pairs that are differentially expressed between various comparisons.
(a) Phylogenetic tree generated by OrthoFinder depicts the relationships of 14 species from eight orders, including Cyatheales, Polypodiales, Salviniales, Schizeales, Gleicheniales, Hymenophyllales, Osmundales and Marattiales. The branch lengths within Cyatheales are shorter than those in other orders, suggesting deceleration of substitution rate in Cyatheales. (b) Genome-wide substitution rate variation in Cyatheales (N is the number of nuclear protein-coding genes). Among the 941 single-copy nuclear genes from Cyatheales, a majority (92%) showed reduced substitution rates, and the reduction in 30% genes was statistically significant (p <0.005). By contrast, <1% of genes had significant elevated rates. Upper bound of each box (Q3) represents the 75th percentile, lower bound of each box (Q1) represents the 25th percentile, the midline of each box is the median, and each whisker represents the highest or lowest point within Q3 + 1.5*IQR or Q1 - 1.5*IQR, respectively (IQR = Q3 - Q1). P-values were calculated using an one-sided likelihood-ratio test.
Extended Data Fig. 5 Expression patterns of monolignol biosynthetic genes in different tissues of A. spinulosa.
(a) The first heat map shows FPKM values of 17 monolignol biosynthetic genes in pith (Pi), sclerenchymatic belt (Sb), xylem (Xy), and phloem (Ph) by RNA-seq analysis and their transcript abundance by qRT-PCR analysis. The second heat map shows FPKM values of 17 monolignol biosynthetic genes in St1 (stem stage 1), So1 (sorus stage 1), Le1 (leaf stage 1) by RNA-seq analysis and their transcript abundance by qRT-PCR analysis. Transcript abundance and FPKM values were normalized using the Z-score method. (b) Heat map shows FPKM values of five CAld5H genes in different tissues of A. spinulosa. Pi1/2/3 (pith stage 1/2/3), SPX1/2/3 (wavy structure stage 1/2/3), So1/2/3 (sorus stage 1/2/3), St1/2/3 (stem stage 1/2/3), Le1/2/3 (leaf stage 1/2/3), Ga (gametophyte). All gene accession numbers are shown in Supplementary Data 3.
(a) HPLC analysis of (±)-alsophilin, (−)-alsophilin, and (+)-alsophilin on a C18 OSAKA SODA CAPCELL PAK column (150 × 4.6 mm I.D., 5 µm) using water (solvent A) and acetonitrile (solvent B) as gradient eluent (0-30 min, 10%-50% B; 30-35 min, 50%-100% B), flow rate 1 ml/min, at 382 nm. (b) HPLC analysis of (±)-alsophilin, (−)-alsophilin, and (+)-alsophilin on a chiral column Daicel Chiralpak IC column (250 × 4.6 mm I.D., 5 µm) using isopropyl and hexane as eluent (60:40) at a flow rate of 1 ml/min. (c) Circular dichroism (CD) spectra of (±)-alsophilin, (−)-alsophilin, and (+)-alsophilin in MeOH, measured using JASCO J-815 CD spectro polarimeters. (d) Comparison of the calculated ECD spectra for (7′S,8′S)-alsophilin and (7′R,8′R)-alsophilin with the experimental spectra of (−)-alsophilin and (+)-alsophilin in MeOH. Energies of the conformers of (+)-alsophilin at B3LYP/6-311g (d,p) in MeOH are shown in Supplementary Table 20.
Extended Data Fig. 7 In vitro enzyme activity assays of seven PKS III proteins, including AspiPKS1/2/3/4/5/6/7.
(a) Assays were conducted using p-coumaroyl-CoA and malony-CoA as substrates, and products were analyzed using LC-MS extracted ion chromatograms (XICs). Naringenin chalcone and coumaroyltriacetic acid lactone (CTAL) (271.20 m/z) and bis-noryangonin (229.20 m/z) are products for AspiPKS1, 2 and 3. Bis-noryangonin (229.20 m/z) and peak 4 (471.20 m/z) are products for AspiPKS4, 5, 6 and 7. (b) Assays were conducted using caffeoyl-CoA and malony-CoA as substrates. CTAL-type lactone (287.15 m/z) and hispidin (245.20 m/z) are products for AspiPKS1, 2, and 3. Hispidin is the product for AspiPKS4, 5, 6, and 7.
(a) GO enrichment of the protein-coding genes that undergo nature selection. (b) KEGG enrichment of the protein-coding genes that undergo nature selection. (c) Genome-wide distribution of CLR, θπ, and Tajima’s D values of 107 populations along 69 chromosomes in A. spinulosa genome. The blue dashed line represents the threshold of the top 5% CLR, the bottom 5% θπ, and the bottom 2.5% Tajima’s D, the red dashed line represents the threshold of the top 2.5% Tajima’s D. (d) The different ancestral population structures are estimated from the same variants set with STRUCTURE software using ancestral population sizes K=2-9. The parameter standard errors are estimated using bootstrapping (100 replicates).
Extended Data Fig. 9 Chemical structures and antioxidant activities of 11 secondary metabolites isolated from A. spinulosa stems.
(a) Chemical structure and hypothetical biosynthetic pathway of one new compound (1) and ten known compounds (2-11). compound 1: (±)-alsophilin; compound 2: 3,4-dihydroxybenzalacetone; compound 3: protocatechnic aldehyde; compound 4: vanillic acid; compound 5: piceatannol; compound 6: cyperusphenol B; compound 7: cinnamtannin B-1; compound 8: jezonodione; compound 9: davallialactone; compound 10: cyathenosin A; compound 11: 4-O-β-D-glucopyranosyl-p-coumaric acid. (b) Antioxidant effects on MDA production of pure compounds at 10−5 M, using curcumin as the positive control. compound 1a: (−)-alsophilin; compound 1b: (+)-alsophilin. (c) Antioxidant effects on MDA production of (±)-alsophilin, (−)-alsophilin, and (+)-alsophilin at 10−4, 10−5, and 10−6 M, respectively, using curcumin as positive control. The data of inhibition rates in b and c are presented as means ±SD of three independent experiments.
Statistical source data for Fig. 1b,d.
Statistical source data for Fig. 2g.
Statistical source data for Fig. 3b–d.
Statistical source data for Extended Data Fig. 3a–d.
Statistical source data for Extended Data Fig. 4b.
Statistical source data for Extended Data Fig. 5a,b.
Statistical source data for Extended Data Fig. 9b,c.
About this article
Cite this article
Huang, X., Wang, W., Gong, T. et al. The flying spider-monkey tree fern genome provides insights into fern evolution and arborescence. Nat. Plants 8, 500–512 (2022). https://doi.org/10.1038/s41477-022-01146-6
This article is cited by
GAGE is a method for identification of plant species based on whole genome analysis and genome editing
Communications Biology (2022)
Nature Plants (2022)
Nature Plants (2022)