Mechanism of Ψ-Pro/C-degron recognition by the CRL2FEM1B ubiquitin ligase

The E3 ligase-degron interaction determines the specificity of the ubiquitin‒proteasome system. We recently discovered that FEM1B, a substrate receptor of Cullin 2-RING ligase (CRL2), recognizes C-degrons containing a C-terminal proline. By solving several cryo-EM structures of CRL2FEM1B bound to different C-degrons, we elucidate the dimeric assembly of the complex. Furthermore, we reveal distinct dimerization states of unmodified and neddylated CRL2FEM1B to uncover the NEDD8-mediated activation mechanism of CRL2FEM1B. Our research also indicates that, FEM1B utilizes a bipartite mechanism to recognize both the C-terminal proline and an upstream aromatic residue within the substrate. These structural findings, complemented by in vitro ubiquitination and in vivo cell-based assays, demonstrate that CRL2FEM1B-mediated polyubiquitination and subsequent protein turnover depend on both FEM1B-degron interactions and the dimerization state of the E3 ligase complex. Overall, this study deepens our molecular understanding of how Cullin-RING E3 ligase substrate selection mediates protein turnover.

It has been recently reported that dedicated CRLs target specific protein sequences located at the N-termini and C-termini of proteins, termed N-and C-degrons 15 , to mediate substrate turnover.A degron is a transferable destabilizing signal that can recruit an E3 to mediate PolyUb and subsequent proteasomal proteolysis of the substrate 16 .The N-degron and C-degron pathways play important roles in a wide spectrum of cellular functions, including the cell cycle, DNA repair, and stress responses 15,17 .Previously, utilizing the genome-wide Global Protein Stability (GPS) assay, we and others reported that CRL2 APPBP2 , CRL2 FEM1A/C , CRL2 FEM1B , CRL2 KLHDC2/3/10 , CRL4 TRPC4AP and CRL4 DCAF12 serve as C-degron-binding E3s [17][18][19][20] .Subsequent structural studies revealed the underlying C-degron recognition mode of various SRs, including KLHDC2 21,22 , FEM1B 20 , DCAF12 23 , and APPBP2 19 .
FEM1B, an SR for a CRL2 E3 complex, is of special interest since we and others found that it is able to recognize the distinct substrates CDK5R1 and FNIP1 via the Arg/C-degron and the zinc-binding motif, respectively 20,24 .In addition, FEM1B demonstrates different substratebinding properties compared with its two close homologs, FEM1A and FEM1C 20 .Very recently, in a systematic screen to identify CRL substrates, CRL2 FEM1B was suggested to recognize several additional substrates bearing C-degrons, including those of CCDC89, CUX1, and PSMB5 25,26 .Intriguingly, none of these C-degrons contained a previously known FEM1B-binding motif; instead, most FEM1B substrates terminated with proline (Pro) were identified.However, how CRL2 FEM1B is assembled and recognizes these identified Pro/C-degrons is largely unknown.
Here, to unveil the molecular mechanism underlying C-degron recognition, we employ cryogenic electron microscopy (cryo-EM) to determine the structures of unmodified or neddylated CRL2 FEM1B bound with the C-degron of CCDC89.Unexpectedly, unmodified CRL2 FEM1B adopts two different dimerization states, with one symmetric and the other asymmetric.Upon neddylation, the asymmetric dimer is converted to a third dimerization state that likely represents the active form.Structural analysis reveals that FEM1B utilizes the Arg/C-degron binding site and a previously unidentified hydrophobic pocket to coordinately bind long, linear C-degrons composed of a C-terminal Pro and an aromatic reside located ~20 residues upstream.Biochemistry experiments and cellular protein stability assays demonstrated that disruption of CRL2 FEM1B dimerization or interaction between FEM1B and C-degron impairs the substrate PolyUb in vitro and ubiquitindependent protein turnover in vivo.This study not only provides structural insights into the recently identified C-degron pathway mediated by the CRL2 FEM1B dimer but also uncovers another potential druggable pocket of FEM1B for designing proteolysis-targeting chimeras (PROTACs) and molecular glues for targeted protein degradation (TPD).

Structure of the symmetric dimer of unmodified CRL2 FEM1B
To provide structural insight into the molecular mechanism underlying C-degron recognition by full-length FEM1B (FEM1B FL ), we purified the human FEM1B-elongin B (EB)-elongin C (EC) complex, as well as the CUL2Δ-RBX1 dimer.CUL2Δ is a variant of CUL2 with an intrinsically disordered region removed to prevent unwanted proteolysis that has been reported to retain its activity similar to that of its wild-type (WT) counterpart 19,27 .Hereafter, CUL2Δ reconstituted in the E3 complex was named CUL2 for simplicity.The FEM1B-EB-EC and CUL2-RBX1 complexes were mixed at a 1:1 ratio and further purified by gel filtration to obtain the CRL2 FEM1B quinary complex (Fig. 1a, Supplementary Fig. 1a).
An excess of the CCDC89 C-degron peptide was added to obtain the cryo-EM sample of the CRL2 FEM1B -CCDC89 complex.Following data acquisition and processing, our results indicate the presence of two distinct dimerization states for the particles.One state exhibits a symmetrical configuration, while the other adopts an asymmetrical conformation.The cryo-EM structures of the symmetric and asymmetric dimers of the CRL2 FEM1B heteropentamer (FEM1B-EB-EC-CUL2-RBX1) were solved at resolutions of 3.39 Å and 3.37 Å, respectively (Fig. 1b-e, Supplementary Fig. 2 and Supplementary Table 1).The maps of the two structures are of high quality, allowing us to build atomic models for most regions of the CRL2 FEM1B subunits.Hereafter, the symmetric dimer is referred to as dimer s (Fig. 1b, c), and the asymmetric dimer is designated as dimer a (Fig. 1d, e).The unmodified CRL2 FEM1B is referred to as un CRL2 FEM1B .
In each CRL2 FEM1B protomer, one FEM1B molecule interacts with an EB-EC dimer and a CUL2 molecule via the VB at the extreme C-terminus (Fig. 1b, c, Supplementary Fig. 4b).The overall architectures of the two CRL2 FEM1B protomers in the dimer s are almost identical, as evidenced by a root-mean-square deviation (RMSD) of 1.66 Å over 1600 main chain Cα atoms (Supplementary Fig. 4b).The VB of FEM1B, which encompasses α32-α33, adopts a helix-turn-helix conformation (Supplementary Fig. 4b) and interacts with EC and CUL2 through hydrophobic interactions (Fig. 2d).Specifically, Leu597 and Leu600 of FEM1B are buried into a large hydrophobic groove of EC formed by Val73, Tyr76, Phe77, Phe93, Ile95, and Leu103; Leu104 of EC is accommodated into a hydrophobic pocket of FEM1B composed of Leu620, Phe623, and Val624.Additional hydrophobic interactions were found between FEM1B Pro617 and CUL2 Pro5 and Val47 (Fig. 2d).
To understand the structural rearrangement in the asymmetric assembly of dimer a , we superimposed the two CRL2 FEM1B protomers on CUL2 and found that while EB and EC could be superimposed very well, FEM1B.p1shifted 19 Å, and RBX1.p1 rotated ~150°(Supplementary Fig. 4d).Taken together, our findings demonstrate that ANK9-10 plays a key role in mediating the asymmetric dimerization of FEM1B within dimer a .Furthermore, the observed subunit rearrangements endow CRL2 FEM1B with the ability to adopt two distinct dimerization modes.Interestingly, the two RBX1 molecules exhibit different orientations, likely to accommodate these varied assembly states.

Structure of neddylated CRL2 FEM1B
It has been reported that Cullin neddylation induces conformational changes that activate CRLs by releasing the autoinhibited conformation of E3 31 .Consistently, in both unmodified CRL2 FEM1B ( un CRL2 FEM1B ) structures, the CUL2 WHB domains are all visible, and the potential lysine neddylation site (Lys689) is partially buried, suggesting that CUL2 Lys689 neddylation is compatible with neither dimer.To understand how CUL2 Lys689 neddylation affects the structure and activity of CRL2 FEM1B , we further reconstituted the neddylated CRL2 FEM1B ( N8 CRL2 FEM1B ) complex bound to the CCDC89 C-degron, in which Lys689 of CUL2 is modified by NEDD8 (Supplementary Fig. 1b, c).Although N8 CRL2 FEM1B still behaves as a dimer, the N8 CRL2 FEM1B particles display two dimerization states.While the architecture of one dimerization state (state 1) is similar to that of dimer s (Fig. 3a, b), the architecture of the other (state 2) is distinct from that observed in un CRL2 FEM1B (Fig. 3c, d).The two dimerization states of the N8 CRL2 FEM1B -CCDC89 complex, named dimer S1 and dimer S2 , were solved by cryo-EM at resolutions of 3.44 Å and 4.09 Å, respectively (Supplementary Fig. 6 and Supplementary Table 1).
The overall architecture of dimer S1 of N8 CRL2 FEM1B is similar to that of un CRL2 FEM1B dimer s except that the WHB domains of both CUL2 are invisible, suggesting their flexible orientation (Figs.1b, c and 3a, b).On the other hand, the dimer a of un CRL2 FEM1B is disrupted by CUL2 neddylation (Supplementary Fig. 5e, f).Conversely, the installed NEDD8 proteins induce a distinct symmetric dimerization state of N8 CRL2 FEM1B , named dimer S2 (Fig. 3c, d).
To obtain a higher-resolution structure to unveil the dimer S2 assembly, we collected another cryo-EM dataset for the N8 CRL2 FEM1B complex bound to the CDK5R1 C-degron and solved the dimer S2 structure of N8 CRL2 FEM1B -CDK5R1 at an overall resolution of 3.54 Å (Supplementary Fig. 7 and Supplementary Table 1).Given that the overall architectures of both dimer S2 structures are exactly the same (Fig. 3c-f), we used the higher resolution dimer S2 structure of N8 CRL2 FEM1B -CDK5R1 for structural analysis.The dimer S2 is symmetric and mediated by two NEDD8 molecules (Supplementary Fig. 8a), which display weaker density than the other complex subunits, allowing us to build only their main chains.Each NEDD8 molecule is located close to the FEM1B-CUL2 interface and likely forms hydrophobic interactions with the C-terminal hydrophobic patch of FEM1B (ANK9-10) via Ile44 (Supplementary Fig. 8b).In addition, the two RBX1 molecules, RBX1.p1 and RBX1.p2, interact with each other via symmetric hydrophobic interactions, with Trp35 and Ile37 from one RBX1 contacting Ile44, Trp87, and Val93 of the other (Supplementary Fig. 8c).
Given that the hydrophobic patch of FEM1B is involved in dimerization assembly in all solved structures, we proposed that mutation of the hydrophobic patch residues would affect the dimerization of CRL2 FEM1B .To this end, we reconstituted the N8 CRL2 FEM1B complex with the FEM1B F549D/V584D/I587D/L588D mutant (4D mutant) (Supplementary Fig. 1d).Consistent with the structural analysis, the static light scattering (SLS) experiment shows that the molecular weight of N8 CRL2 FEM1B is 325 kDa, indicating that it is a dimer in solution, while the N8 CRL2 FEM1B 4D mutant behaves as a monomer (molecular weight (MW): 171 kDa) (Supplementary Fig. 1e).Taken together, the C-terminal hydrophobic patch of FEM1B is critical for dimerization of the N8 CRL2 FEM1B complex.

CRL2 FEM1B assembles into a dimeric state in vivo
To investigate the oligomeric state of CRL2 FEM1B in vivo, we employed gel filtration chromatography on lysates extracted from cells stably expressing either WT FEM1B or the 4D mutant.In line with the structural data, the WT complex is eluted in higher MW fractions across all collected samples than the complex containing the FEM1B 4D mutant, suggesting that the WT protein forms oligomers in vivo, whereas the 4D mutation impairs this oligomerization process (Supplementary Fig. 9a, b).Next we used co-immunoprecipitation to further corroborate the in vivo dimerization of FEM1B.Cells co-expressing HA-and MYC-tagged WT or 4D mutant FEM1B were subjected to immunoprecipitation using an anti-HA antibody.Compared with those of the 4D mutant, significantly greater amounts of WT MYC-FEM1B coprecipitated with WT HA-FEM1B (Supplementary Fig. 9c), supporting the notion of enhanced dimerization between WT FEM1B proteins compared to dimerization-deficient mutant in vivo.Furthermore, there was greater co-precipitation of endogenous CUL2 from immunoprecipitated WT HA-FEM1B compared to the 4D mutant (Supplementary Fig. 9d), implying that FEM1B dimerization likely facilitates binding to CUL2 and stabilizes the CRL2 FEM1B complex.
Next, we superimposed the structures of RBX1-UBE2D2~Ub and N8 CRL2 FEM1B dimer S1 onto RBX1 (Supplementary Fig. 10b).The structure superposition indicates that CUL2 neddylation leads to the disassociation of the CUL2.p1WHB from CUL2.p2, leaving more space for Ub to contact RBX1.p1, which facilitates stronger competition of UBE2D2~Ub with CUL2.p2 for binding to RBX1.p1.CUL2 neddylation likely alleviates the inhibitory state of dimer s by leading to the release of the CUL2.p1WHB domain from CUL2.p2, which decreases the energy barrier for the interaction of UBE2D2~Ub with RBX1.

FEM1B binds to long C-degrons ending with proline
Recent work reported that CRL2 FEM1B E3 binds to the C-degrons of CCDC89, PSMB5, BEX2, CUX1 and MCRIP1 25 .Unlike previously identified FEM1B degrons, none of the C-degrons end with an Arg or contain a zinc-binding motif.Moreover, three out of five C-degrons (CCDC89, PSMB5, and BEX2) contained a proline at the C-terminus, and all contained an aromatic residue (Ψ) ~20 residues upstream (Fig. 4a), suggesting that the C-degron recognition mode by FEM1B FL is different from our previously reported Arg/C-degron recognition mode by FEM1B  , a shorter version of FEM1B that contains ANK1-7 and TPR1-3 (Fig. 1a).
To quantitatively examine the binding affinity between FEM1B and the above identified C-degrons, we expressed FEM1B with an EB/EC dimer to obtain a soluble ternary complex (FEM1B-EB-EC) (Supplementary Fig. 1f).The peaks of the purified WT and 4D mutant FEM1B-EB-EC complexes correspond to ~200 and 112 kDa, respectively (Supplementary Fig. 1g), suggesting that the majority of WT FEM1B-EB-EC behaves as a dimer in solution and that CUL2-RBX1 is not essential for CRL2 FEM1B dimer formation.We then examined the degron binding affinities of FEM1B-EB-EC by isothermal titration calorimetry (ITC).The binding data indicate that the FEM1B-EB-EC complex binds to the five C-degrons with K D s in the range of 1.4-6.8μM (Fig. 4a, b).

Recognition of CCDC89 C-degron by FEM1B
Due to the limited resolution of C-degron peptides observed in all solved cryo-EM structures, we performed local refinement for the N8 CRL2 FEM1B dimer S1 to obtain a 3.55 Å resolution structure of the FEM1B-CCDC89 subcomplex (Supplementary Fig. 6 and Supplementary Table 1).Notably, the FEM1B-CCDC89 interface is conserved in all the CRL2 FEM1B -CCDC89 complexes.
For convenience, the peptide is numbered from the C-terminus, with the last Pro being Pro-1, the penultimate Ser being Ser-2, etc.Most residues of CCDC89 are visible in the structure except for the five central residues ( −12 RELNG −8 ), probably due to their intrinsic flexibility (Supplementary Fig. 11a).The C-terminal region of the peptide adopts a 3 10 helix structure and occupies the CDK5R1 Arg/C-degron binding site of FEM1B, which is formed by ANK3-4 (Fig. 5a and Supplementary Fig. 3).Pro-1 is accommodated by the same FEM1B pocket that has been reported to recognize the arginine at C-end.The main chain carbonyl group of Pro-1 is hydrogen bonded to the side chains of Ser122 and Arg126 of FEM1B, and its side chain forms hydrophobic interactions with Tyr84, Trp93, and Phe130 (Fig. 5b).The main chain carbonyl groups of Ser-2 and Leu-3 are hydrogen bonded to the side chains of Arg126 and Tyr84, respectively, with Leu-3 forming hydrophobic interactions with Ile160, Tyr163, and Phe193 (Fig. 5c).His-4 forms hydrophobic interactions with His185, and Arg-5 interacts with Tyr153 via cation-π interactions (Fig. 5d).In contrast to −5 RHLSP −1 , Leu-6 and Lys-7 make few contacts with FEM1B residues.
The N-terminal portion of the CCDC89 peptide, −22 KHSLDLLSKE −13 , adopts an α-helical conformation and interacts with TPR3, TPR4, and a 3 10 helix insertion in ANK8 (Supplementary Fig. 3).Specifically, His-21 is positioned in a hydrophobic pocket composed of Val391, Phe501, and His502.Additionally, the imidazole ring and main chain nitrogen group of His-21 form hydrogen bonds with the side chains of Gln394 and Asp356, respectively (Fig. 5e).
Next, we employed mutagenesis and ITC binding assays to evaluate the roles of C-degron residues in binding to FEM1B.The binding data demonstrated that while the P-1R mutant displayed binding affinity for FEM1B comparable to that of the WT peptide (K D s: 1.9 μM vs. 2.2 μM), as expected, the P-1A, P-1Q, and P-1L substitutions decreased the FEM1B binding affinity by 3-20-fold (K D s: 6.7-46 μM vs. 2.2 μM).Consistent with the suggested key role of CCDC89 H-21 in FEM1B binding, H-21A and H-21L reduced the binding affinity by >22fold (K D s: >50 μM vs. 2.2 μM) (Fig. 4c).Building upon our structural analysis that identified residues Asp356, Val391, Gln394, Phe501, and His502 of FEM1B as potential interaction points with His-21 of the CCDC89 C-degron (Fig. 5e), we further investigated the functional relevance of these residues.To this end, we purified the FEM1B-EB-EC complex containing a FEM1B quintuple mutant, D356A/V391A/Q394A/ F501A/H502A (5A mutant), and tested its binding to the CCDC89 C-degron.The binding data indicate that the affinity of the 5A mutant to CCDC89 is >22-fold weaker than that to WT FEM1B (K D s: >50 μM vs. 2.2 μM) (Fig. 4d).We further investigated the potential influence of CRL2 FEM1B dimerization on substrate recognition.ITC binding data revealed that the CCDC89 peptide exhibits comparable binding affinity to both the WT FEM1B protein and the 4D mutant (K D s: 2.6 vs. 2.2 μM) (Fig. 4d).Our findings collectively demonstrate that Pro and Arg are favored at the extreme C-terminus, and both Pro-1 and His-21 within the CCDC89 C-degron motif are critical residues for its interaction with FEM1B.Furthermore, our data indicate that the dimerization state of CRL2 FEM1B does not influence substrate recognition.
Our structural analyses suggest that the length of the C-degron might be critical for CCDC89 to engage the Ψ pocket and the Pro-1 binding pocket simultaneously, which inspired us to define the minimum distance between the two pockets.CCDC89-C-degron variants were generated by systematically deleting residues in the linker region ( −15 SKERELNGK −7 ), and their FEM1B binding affinities were examined (Supplementary Table 2).Although the deletion of up to five residues in the C-degron linker region does not disturb binding to FEM1B, the deletion of seven residues decreases the binding affinity by ~3.5-fold (K D s: 2.2 vs. 8.0 μM), and further deletion of two residues reduces the binding affinity by >20-fold (K D s: 2.2 vs. >50 μM) (Fig. 4e).This demonstrates that for the CCDC89 C-degron, the N-terminal histidine residue can be positioned between ~15 and 20 residues upstream of the C-terminus without compromising its binding affinity to FEM1B.

Recognition of the CUX1 C-degron by FEM1B
Although most of the identified FEM1B C-degrons bearing substrates contain a proline at the C-terminus 25 , some of them, including CUX1, do not end with a proline.To understand how the C-degron of CUX1 is recognized by FEM1B, we further solved the cryo-EM structure of un CRL2 FEM1B with CUX1.The CRL2 FEM1B -CUX1 dimer a and dimer s were solved at resolutions of 3.38 Å and 3.27 Å, respectively (Supplementary Fig. 12 and Supplementary Table 1).The two dimeric structures of the un CRL2 FEM1B -CUX1 complex are similar to those of the CRL2 FEM1B -CCDC89 complex (Supplementary Fig. 13).Local refinement was performed on the dimer a structure of un CRL2 FEM1B -CUX1 to obtain a 3.60 Å resolution structure of the FEM1B-CUX1 subcomplex (Supplementary Fig. 12 and Supplementary Table 1).
The overall architecture of the FEM1B-CUX1 complex exhibits a high degree of structural similarity to that of the FEM1B-CCDC89 complex (Fig. 5f).Two parts of the CUX1 peptide, −23 KFADHLHKFH −14 and −7 AAGDLWQ −1 , are visible, while the middle 6 residues, −13 ENDNGA −8 , are invisible (Supplementary Fig. 11c, d).The conformation of the CUX1 C-terminal fragment is slightly different from that of its counterpart in CCDC89.In contrast to the CCDC89 Pro-1 residue, the main chain carbonyl group of CUX1 Gln-1 is hydrogen bonded to the side chain of Ser122 in FEM1B.However, Gln-1 lacks residue-specific interactions with FEM1B itself.Trp-2 forms two hydrogen bonds with the side chain of FEM1B Arg126 via its main chain carbonyl group, with its side chain making π-π interactions with the aromatic ring of Tyr84; Leu-3 makes hydrophobic interactions with Tyr163 and Phe193; Asp-4 and Gly-5 make very few interactions FEM1B residues except that the main chain carbonyl group of Asp-4 is hydrogen bonded to Arg126; and Gly-5 makes hydrophobic interactions with Trp-2 to stabilize the CUX1 conformation (Fig. 5g).
The CUX1 N-terminal fragment adopts a helix similar to its counterpart in CCDC89.Phe-22 is snugly accommodated into the pocket that was identified earlier as the binding site for CCDC89 His-21.Phe-22 forms hydrophobic interactions with FEM1B Val391 and His502, π-π interactions with Phe501 and Trp367, and a main chain hydrogen bond with Asp356 (Fig. 5h).The favorable π-π interactions suggest that the pocket likely prefers aromatic residues, such as Phe, Tyr, and Trp, over other residues.However, as observed for CCDC89, a His could interact with the pocket residues with its imidazole ring and form a hydrogen bond with Gln394 (Fig. 5e), positioning it as another favorable residue for recognition by FEM1B.
To evaluate the roles of CUX1 C-degron residues in FEM1B binding, we generated several CUX1 mutants and examined their FEM1B binding affinities by ITC.While the Q-1A mutant binds FEM1B with a similar affinity to WT CUX1, the W-2A and L-3A mutations reduced the binding affinity by ~1.8-fold (K D s: 5.2 vs. 2.8 µM) and ~3.0-fold (K D s: 8.5 vs. 2.8 µM), respectively (Fig. 4f).F-22A decreased the binding affinity by > 170-fold (K D s: >500 vs. 2.8 µM) (Fig. 4f), suggesting that Phe-22 plays a critical role in binding to FEM1B.To understand whether the key roles of the C-terminal proline and upstream aromatic residue also apply to other identified C-degrons, we chose to examine the binding affinities of the variants of the PSMB5 C-degron because it contains both Pro-1 and Trp-21.In agreement with previous analysis, while P-1A reduced FEM1B binding by ~4.8-fold, W-21A abolished the binding (Fig. 4g).
Taken together, structural analysis of the C-degron-bound FEM1B complexes indicates that an upstream aromatic residue (Phe, Tyr, Trp) or a histidine is critical for binding to FEM1B.The C-terminal proline preference observed in most FEM1B C-degrons and its established role in substrate instability 25 suggest that the C-terminal proline is favored.However, it is less critical for binding, as some substrates, such as CUX1, do not end with a proline.Notably, when Pro-1 is absent, a penultimate hydrophobic residue, such as Trp-2, might compensate, as observed in the CUX1 C-degron.Therefore, we named the C-degron characterized here as Ψ-Pro/C-degron with Ψ indicating aromatic residues and His.
Our previous study reported that the Arg/C-degron of CDK5R1, which contains the last 10 residues, is sufficient to interact with FEM1B  . Intriuingly, sequence alignment with the last 23 amino acids of CDK5R1 demonstrated that CDK5R1 also contains the upstream aromatic residue Phe (Phe-22) (Fig. 4a).We then employed an ITC binding assay to examine the FEM1B binding affinities of the CDK5R1 C-degrons of varying lengths.The binding data indicate that the longer fragment of the CDK5R1 C-degron (23 aa) binds to FEM1B > 5-fold more strongly than the 10-aa fragment (K D s: 1.4 vs. 7.6 μM).In contrast, both C-degrons bind to the FEM1B Ψ pocket mutant (5A) with K D s in the range of 7.8-8.8μM (Fig. 4h).This finding suggests that Phe-22 could increase the binding affinity of CDK5R1 for FEM1B by contacting the Ψ pocket.A full recognition sequence of Ψ-Arg/C-degron is likely necessary for CDK5R1 to achieve optimal FEM1B binding affinity.

Validation of the FEM1B mode of substrate recognition utilizing in vitro and in vivo assays
To study how the FEM1B-C-degron interaction and FEM1B-mediated dimerization and neddylation affect the E3 activity of CRL2 FEM1B , we employed an in vitro ubiquitination assay to examine the PolyUb of CCDC89 by CRL2 FEM1B and its variants.First, we compared the activity of un CRL2 FEM1B and its neddylated form.The assay showed that the activity of un CRL2 FEM1B was ~60% that of its neddylated counterpart (Supplementary Fig. 14a, b).This finding implies that CUL2 neddylation serves as an activation mechanism for E3 activity.Next, we introduced three single point mutations in CCDC89, namely, P-1A, L-3E, and H-21A.These mutations resulted in a 50-70% reduction in PolyUb by the E3 complex (Supplementary Fig. 14c-f), underscoring the important roles of these C-degron residues in FEM1B binding.Consistent with the ITC data, mutations of the FEM1B residues involved in Pro-1 or His-21 binding also diminished the activity of CRL2 FEM1B E3 (Supplementary Fig. 14e-h).Notably, the FEM1B dimerization mutant (4D), which does not affect CCDC89 binding, slightly weakened E3-mediated PolyUb (Supplementary Fig. 14i, j), suggesting a potential role for CRL2 FEM1B dimerization in facilitating Ub transfer rather than in substrate recognition.Altogether, the results of the ubiquitination assay indicated that both the C-terminal and upstream aromatic/His residues act as the key C-degron residues interacting with FEM1B, and the assembly of the CRL2 FEM1B homodimer is required to achieve maximal E3 activity toward C-degron-bearing substrates.
To validate the functional role of the C-degron-binding residues in FEM1B in vivo, we constructed a series of FEM1B mutants in a lentiviral expression vector and tested their activity in a cell-based system termed GPS profiling 32 .GPS is a fluorescence-based reporter system that measures protein stability in live cells.This system is based on a bicistronic lentiviral expression vector that encodes DsRed, which serves as an internal expression reference for the lentiviral cassette, and a GFP fusion that is translated from an internal ribosome entry site (IRES).In this method, the GFP/DsRed ratio serves to determine the effect of the fusion partner on the stability of GFP (Supplementary Fig. 15a) 17,32 .
For cell-based assays, we first generated HEK293T FEM1B knockout (KO) cells using CRISPR/Cas9.We then transduced the KO cells with lentiviral constructs encoding WT or mutant FEM1B cDNA, followed by recovery and a second transduction with GPS peptide substrates (Fig. 6a).As examples of FEM1B substrates, we constructed GPS reporters encoding the 23 C-terminal residues ("23-mers") of PSMB5 and CCDC89 harboring Ψ-Pro/C-degrons.Additionally, a control reporter containing the C-terminus of CDK5R1, which features an Arg/ C-degron motif, was also constructed.
Consistent with the structural analysis and in vitro ubiquitination assays, mutations disrupting the Pro-1 binding pocket (R126A and Y84A/F130A) and the aromatic binding pocket failed to restore substrate degradation, as shown in Fig. 6b.Likewise, the aromatic binding pocket mutant displayed impaired turnover of the Arg/C-degron substrate CDK5R1 (Fig. 6c), corroborating the ITC data (Fig. 4h).Notably, immunoblot analysis confirmed comparable expression levels of the mutants and WT FEM1B (Fig. 6d).The activity of FEM1B toward Ψ-Pro/C-degrons was dependent on the two substrate binding pockets; P-1A or H-21A substitutions resulted in substrate stabilization to a similar extent as that observed in FEM1B KO cells, and FEM1B cDNA expression failed to promote substrate degradation (Supplementary Fig. 15b).Altogether, the GPS cell-based assay demonstrated the importance of the FEM1B C-degron binding pockets in Ψ-Pro/C-degron recognition in vivo.
Finally, we employed the FEM1B 4D mutant, the dimerization mutant, to assess the functional significance of CRL2 FEM1B dimerization for C-degron binding and substrate turnover.While exhibiting slightly reduced E3 activity in vitro (Supplementary Fig. 14i, j), the 4D mutant displayed impaired in vivo degradation of GFP-fusion substrates harboring either Ψ-Pro/C-degrons (Fig. 6b) or the Arg/C-degron (Fig. 6c).These data suggest that CRL2 FEM1B dimerization is essential for substrate PolyUb and subsequent turnover of substrates bearing Ψ-Pro/Cdegron or Arg/C-degrons.

Discussion
CRL2 FEM1B was previously shown to recognize distinct Arg/C-degrons and Cys-dependent degrons.Two recent studies revealed that FEM1B additionally targets an additional class of C-terminal proline-ending degrons and some degrons containing the internal WxxYL motif 25,26 .Here, we present cryo-EM structures of CRL2 FEM1B in complex with various degron peptides, including those derived from both unmodified and neddylated CRL2 FEM1B , to elucidate the mechanisms underlying FEM1B's degron specificity and CRL2 FEM1B complex activation.
Unexpectedly, unmodified CRL2 FEM1B is a homodimer exhibiting symmetric and asymmetric dimerization states, dimer a and dimer s , respectively.Neddylated CUL2 retains the ability to form dimers in two distinct conformations.While the overall architecture of the dimers is preserved between the unmodified state (dimer s ) and the neddylated symmetric state (dimer S1 ), the WHB domains are not visible in the latter structure.The conjugation of NEDD8 disrupts the dimer a assembly by introducing potential steric clashes, causing structural rearrangement to form a different dimeric assembly, dimer S2 (Supplementary Fig. 16).At the molecular level, the binding of E2~Ub leads to potential steric clashes in all solved structures, suggesting that the conformation of RBX1 must change, including its dissociation from the current ligand, to interact with E2~Ub.NEDD8 facilitates RBX1 accessibility to E2~Ub by displacing the WHB domain (Supplementary Fig. 10).Thus, the likely role of CUL2 neddylation is to lower the energy barrier for the interaction of E2~Ub with RBX1.
Despite the different dimeric states in un CRL2 FEM1B and N8 CRL2 FEM1B , there are several common shared structural features in all solved structures.First, the intact assembly of CRL2 FEM1B protomers is maintained in all dimeric structures.For each protomer, FEM1B interacts with EC and CUL2 via major and minor sites through hydrophobic interactions.Second, a hydrophobic patch located towards the C-terminus of FEM1B is required for the dimerization of CRL2 FEM1B in all states.Third, the C-degrons of CCDC89 and CUX1 interact with both the N-and C-arms of FEM1B, suggesting that both the Ψ and Probinding pockets are critical for docking this class of C-degrons to FEM1B.
To compare the various FEM1B-degron binding modes, we superimposed the structures of FEM1B-CCDC89, FEM1B-CUX1, FEM1B-CDK5R1 (PDB: 7CNG), and FEM1B-FNIP1 (PDB: 7ROY) (Supplementary Fig. 17a, b).All ligands, except FNIP1, represent C-degrons, with most of their C-terminal residues binding to the same pocket of FEM1B.Their binding preference follows the order Arg-1 > Pro-1 > Gln-1 (Supplementary Fig. 17c-e).While Arg-1 forms both cation-π and hydrogen bonding interactions with the pocket residues and Pro-1 makes extensive hydrophobic interactions with the pocket residues (Supplementary Fig. 17c, d), Gln-1 does not form any residue-specific interactions with FEM1B (Supplementary Fig. 17e).In contrast, no FNIP1 residues are engaged in the pocket accommodating C-terminal residues; instead, they form intermolecular zinc fingers with FEM1B (Supplementary Fig. 17f).FEM1B recognizes the Arg/C-degron of CDK5R1 similarly to CCDC89 and CUX1.In all three cases, an aromatic residue (Phe-22 in CDK5R1 and CUX1, His-21 in CCDC89) provides additional interactions with the Ψ pocket of FEM1B (Supplementary Fig. 17g, h).Notably, for CCDC89 and CUX1, these interactions likely compensate for the weaker binding affinity caused by the lack of a C-terminal arginine.The flexibility of FEM1B in substrate recognition might be required for regulating the turnover of diverse substrates in distinct pathways.
Another intriguing feature of CRL2 FEM1B is that although dimerization does not affect its binding to these identified Cdegrons, dimerization does have an impact on the degradation of substrates.Two potential mechanisms for CRL2 FEM1B -mediated protein ubiquitination have been proposed.In trans-acting mode, C-degron binding by one CRL2 FEM1B protomer could facilitate ubiquitin transfer catalyzed by RBX1 of the other protomer.Alternatively, the two CRL2 FEM1B protomers might cooperate to catalyze the ubiquitination of an oligomeric substrate.Notably, two potential FEM1B substrates, CCDC89 and CDK5R1, are known to form dimers or higher-order oligomers 33,34 .In addition, in vivo, monomeric CRL2 FEM1B might exhibit enhanced susceptibility to disruption by negative regulators, including deubiquitinases (DUBs) and deneddylation-associated factors, such as CSN complexes and CAND1.Further study is required to understand whether CRL2 FEM1B dimerization also impacts its E3 activity towards other substrates in vivo.Overall, the present study reveals the assembly modes of CRL2 FEM1B , as well as its ability to recognize distinct C-degrons, with implications in PROTAC design for future TPD.

Cloning, protein expression and purification
All proteins are of human origin.All genes used in this study for protein expression and purification, except for UBA1, were amplified by PCR from a complementary DNA library.FEM1B, UBA1, CDC34, ubiquitin and UBE2M were cloned and inserted into modified pET28a vectors fused with the open reading frame of the yeast SMT3 gene.EB-EC (residues 17-112) was cloned and inserted into the pRSFDuet-1 vector.APPBP1-UBA3 were cloned and inserted into the pETDuet-1 vector.NEDD8 and FLAG-CCDC89 were cloned and inserted into the His 6 -pGEX 4T-1 vector.The C-term 23-mer peptides CCDC89, CUX1, PSMB5, BEX2, CDK5R1 and MCRIP1 were cloned and inserted into the pET28a-SUMO vector via overlap extension PCR to obtain SUMO fusion peptides, which were fused via a (Gly-Gly-Gly-Ser) 2 linker.The CUL2Δ•RBX1 construct (CUL2Δ: Δ117-134) was a kind gift from Dr. Xing Liu at Purdue University.
All recombinant proteins were overexpressed in Escherichia coli BL21(DE3) cells.FEM1B and EB-EC were co-transformed with two vectors.The cells were grown in LB media at 37 °C until the optical density (OD 600 ) reached approximately 0.8.Protein expression was induced with 0.2 mM β-d-1-thiogalactopyranoside for 20 h at 16 °C.The cells were collected by centrifugation at 3600 × g for 10 min at 4 °C, after which the pellets were resuspended in lysis buffer containing 20 mM Tris, 400 mM NaCl, and 2 mM imidazole (pH 7.5).Recombinant proteins were purified by Ni-NTA (GE Healthcare), and eluted with 20 mM Tris, 400 mM NaCl, 500 mM imidazole, pH 7.5.
Fractions containing target proteins were incubated overnight at 4 °C with TEV protease to cleave the tag and further purified by size-exclusion chromatography in 25 mM HEPES, 150 mM NaCl, pH 7.5, and 1 mM DTT.The CUL2Δ•RBX1 complex was neddylated by mixing 0.2 µM NAE1 (APPBP1-UBA3), 1 µM UBE2M, 12 µM CUL2-RBX1, and 25 µM NEDD8 in 25 mM HEPES (pH 7.5), 150 mM NaCl, 10 mM MgCl 2 , and 1 mM ATP.The reaction was performed at 37 °C.Neddylation was quenched after 10 min by the addition of 10 mM DTT. Neddylated CUL2-RBX1 was purified by size-exclusion chromatography in 25 mM HEPES, 150 mM NaCl, pH 7.5, and 1 mM DTT. Fractions containing Sumo fusion peptides were incubated overnight at 4 °C with ULP1 protease to cleave the tag and further purified by anion exchange chromatography using a HiTrap Q HP column or a HiTrap S HP column (Cytiva Life Sciences).Proteins for ITC were purified by size-exclusion chromatography in 20 mM Tris, 200 mM NaCl, pH 7.5, and 1 mM EDTA.All variants of FEM1B, CCDC89, PSMB5 and CUX1 were generated using PCR and verified by sequencing.All variants were purified in the same way as the WT protein.ITC experiments were performed on a MicroCal iTC200 calorimeter (GE Healthcare) at 25 °C by titrating 2 μl of peptides (0.5-1 mM) into cells containing 50 μM proteins, with a spacing time of 120 s and a reference power of 5 μCal s −1 .Control experiments were performed by titrating peptides (0.5-1 mM) into buffer, and the concentrations were subtracted during analysis.Binding isotherms were plotted, analyzed and fitted based on a one-site binding model by MicroCal PEAQ-ITC analysis software (Malvern Panalytical).The SUMO fusion peptides used for ITC experiments are summarized in Supplementary Table 2.The original ITC binding data are shown in Supplementary Fig. 18.

Multiangle static light scattering (MALS)
The molecular mass analysis of the N8 CRL2 FEM1B WT and the variants was performed on an AKTA Pure system (GE Healthcare) coupled with a DAWN HELEOS 8+ instrument (Wyatt Technology).One hundred microliters of protein sample (5 mg/ml) was loaded into a Superose 6 Increase 10/300 GL column (GE Healthcare) pre-equilibrated in 25 mM HEPES, pH 7.5, 150 mM NaCl, and 1 mM DTT.The data were analyzed with ASTRA software (Wyatt).
The electron micrographs for all datasets were acquired on a 300 kV FEI Titan Krios electron microscope equipped with a K3 Summit direct electron camera (Gatan).Automated data acquisition for all datasets was performed using EPU software (Thermo Fisher) at a magnification of 105,000× (corresponding to a calibrated sampling of 0.82 Å per pixel).A total of 4,472 micrographs of the CRL2 FEM1B -CCDC89 complex, 4,223 micrographs of the N8 CRL2 FEM1B -CCDC89 complex, 4,232 micrographs of the N8 CRL2 FEM1B -CDK5R1 complex, and 8,112 micrographs of the un CRL2 FEM1B -CUX1 complex were collected.The cumulative dose used was 57.6 e − Å −2 , which was fractionated into 30 frames.Target defocus values typically ranged from −1.5 to −2.9 μm.

Image processing
All image processing and analyses were performed with cryoSPARC.Movies were aligned using patch motion correction followed by contrast transfer function (CTF) estimation in cryoSPARC.The particles were picked manually via automatic picking.All classifications and refinements were conducted in cryoSPARC.For the unmodified CRL2 FEM1B -CCDC89 complex, a total of 1,577,333 particles were autopicked and extracted in cryoSPARC, and then the extracted particles were subjected to 2D classification, with good classes selected for 3D classification.A total of 1,171,468 particles were used for ab initio 3D reconstruction in cryoSPARC into four classes.Classes exhibiting CUL2 and FEM1B density were subjected to heterogeneous refinement in cryoSPARC.Then, nonuniform refinement together with local and global CTF refinement was performed with the two good classes, yielding two maps with 3.37 Å resolution from 470,742 particles and 3.39 Å resolution from 236,621 particles.
For the N8 CRL2 FEM1B -CCDC89 complex, the image processing steps are similar to those described above, finally yielding maps with 4.09 Å resolution from 102,432 particles and 3.44 Å resolution from 84,450 particles.The final map of the FEM1B-CCDC89 complex was obtained by local refinement with a resolution of 3.55 Å.
For the N8 CRL2 FEM1B -CDK5R1 complex, the map of the N8 CRL2 FEM1B -CCDC89 complex was used as a template for particle picking and heterogeneous refinement in cryoSPARC, yielding a map with 3.54 Å resolution from 447,970 particles.
For the un CRL2 FEM1B -CUX1 complex, the 3.27 Å resolution map of the dimer a and the 3.38 Å resolution map of the dimer s , were obtained from 420,437 and 206,765 particles, respectively.The structure of FEM1B-CUX1 was achieved by local refinement with a resolution of 3.51 Å. Map resolution was estimated by the "gold standard" Fourier shell correlation (FSC) at the 0.143 criterion.Local resolutions were estimated using the Local Map Estimation program in cryoSPARC, with the local resolution map depicted by UCSF Chimera 35 .

Model building and refinement
The sharpened maps were generated by cryoSPARC.The atomic models for model building, including those of FEM1B, EB, EC, CUL2, and RBX1, were obtained from AlphaFold2 36 .The degron peptides were fitted into the map after the other CRL2 FEM1B subunits were built by using COOT 0.8.9.2 37 and were further refined in Phenix 1.19.2 by using real-space refinement 38 .The refined structures were evaluated with MolProbity in Phenix 1.19.2 38 .The refinement statistics are summarized in Supplementary Table 1.PyMOL 1.7.0.1 (https://pymol.org/)and UCSF Chimera 1.11.2 35 were used for figure preparation.

Mammalian expression plasmids
To express FEM1B in mammalian cells, cDNA for FEM1B was obtained from the Ultimate ORF Clone collection (Thermo Fisher Scientific) and subcloned and inserted into the lentiviral pHAGE-Flag-HA Gateway Destination vector or MYCx5 Gateway Destination vector via an LR recombination reaction (Thermo Fisher Scientific, #11791020).Mutations of key residues in the degron binding pocket or the dimerization interface of FEM1B were generated by PCR-mediated site-directed mutagenesis using the QuikChange Lightning Kit (Agilent, #210518) according to the manufacturer's protocol.All mutations were confirmed by Sanger sequencing.The primer sets used to generate FEM1B mutants for expression in mammalian cells are listed in Supplementary Table 3.

Fig. 1 |
Fig. 1 | Overall structure of un CRL2 FEM1B .a Domain architecture of individual subunits in the CRL2 FEM1B complex, with each subunit denoted by a distinct color.Maps of the un CRL2 FEM1B dimer s bound to the CCDC89 C-degron, with protomer 1 colored

Fig. 4 |
Fig. 4 | Binding affinities of FEM1B-EB-EC and its variants towards various C-degrons.a Sequence alignment of the C-degrons of CCDC89, CUX1, MCRIP1, PSMB5, BEX2 and CDK5R1, with Ψ indicating the specific aromatic residue or His.b ITC curves for the binding of the FEM1B-EB-EC ternary complex to different SUMO fusion C-degrons.c ITC curves for WT FEM1B-EB-EC binding to the CCDC89 C-degron and its variants.d ITC curves for CCDC89 C-degron binding to the FEM1B-EB-EC complex WT and the 5A or 4D mutants.e ITC curves for WT FEM1B-EB-EC binding to the CCDC89 C-degron and its deletion variants.f ITC curves for WT FEM1B-EB-EC binding to the CUX1 C-degron and its variants.g ITC curves for WT FEM1B-EB-EC binding to the PSMB5 C-degron and its variants.h ITC curves for the binding of 23-aa and 10-aa CDK5R1 C-degrons to FEM1B-EB-EC WT and the 5A mutant.

Fig
Fig. | Ψ-Pro/C-degron recognition by FEM1B.a Overall structure and cryo-EM map of the FEM1B-CCDC89 complex.FEM1B and the CCDC89 peptide are shown in cyan and yellow cartoons, respectively, with the invisible peptide region indicated by dashes.Close-up views of FEM1B recognition of Pro-1 (b), Ser-2 and Leu-3 (c), His-4 and Arg-5 (d), and His-21 (e).f Overall structure and cryo-EM map of the FEM1B-CUX1 complex.FEM1B and the CUX1 peptide are shown in cyan and salmon cartoons, respectively, with the invisible peptide region indicated by dashes.Close-up views of FEM1B recognition of Gln-1, Trp-2, Leu-3, Asp-4, Gly-5 (g), and Phe-22 (h).

Fig. 6 |
Fig. 6 | GPS assay to validate FEM1B residues critical for degron binding and dimerization of the E3 complex.a Overview of the GPS experiment used to investigate the effect of WT and mutant FEM1B proteins on the stability of GFPfused substrates bearing C-degrons.The figure was created with BioRender.com.Stability analysis of the indicated GFP-fused 23-mers bearing a Ψ-Pro/C-degron (b) or Arg/C-degrons (c) in various genetic backgrounds.The GFP/DsRed ratio was used to indicate the stability of the GFP-fused C-degron and was analyzed by flow cytometry.In each case, GFP-fused degron instability was rescued in cells expressing the WT but not the mutant FEM1B proteins.Control KO cells (cells transfected with sgRNA targeting AAVSI) expressing GPS substrate served as the reference for substrate instability.d The abundance of exogenously expressed FEM1B protein, WT or the indicated mutants, as assessed by immunoblotting (IB) using an anti-HA antibody.GAPDH was used as a loading control.Source data are provided as a Source Data file.