Bacterial biofilms are formed on environmental surfaces and host tissues, and facilitate host colonization and antibiotic resistance by human pathogens. Bacteria often express multiple adhesive proteins (adhesins), but it is often unclear whether adhesins have specialized or redundant roles. Here, we show how the model biofilm-forming organism Vibrio cholerae uses two adhesins with overlapping but distinct functions to achieve robust adhesion to diverse surfaces. Both biofilm-specific adhesins Bap1 and RbmC function as a “double-sided tape”: they share a β-propeller domain that binds to the biofilm matrix exopolysaccharide, but have distinct environment-facing domains. Bap1 adheres to lipids and abiotic surfaces, while RbmC mainly mediates binding to host surfaces. Furthermore, both adhesins contribute to adhesion in an enteroid monolayer colonization model. We expect that similar modular domains may be utilized by other pathogens, and this line of research can potentially lead to new biofilm-removal strategies and biofilm-inspired adhesives.
Bacterial biofilms are surface-attached communities of bacterial cells enclosed in an extracellular matrix1. Biofilms represent an important lifestyle niche for bacteria in the environment as well as a serious threat to human health due to their role in persistent infections and contamination of medical devices2,3,4. One key evolutionary advantage provided by biofilm formation is surface adhesion, whereby bacteria physically associate with essential environmental and host surfaces to prioritize nutrient uptake and to resist environmental stressors5,6. Among the components of the biofilm matrix, exopolysaccharides and accessory proteins have been suggested to play predominant roles in biofilm adhesion to both biotic and abiotic surfaces7. However, how they function at the molecular level remains largely unknown. One major puzzle concerns what biochemistry makes these adhesins specific to the biofilm lifestyle: efforts in the field have focused on the initial stage, during which pili, flagella, and other adhesins contribute to the attachment of individual cells8. In contrast, little is known about how matrix-encased cells collectively adhere to surfaces in mature biofilms and to what extent this mechanism differs from the single-cell case. Such a mechanistic understanding is critically relevant for designing new biofilm removal strategies that target biofilm-surface interactions as an alternative to antibiotic treatments and for creating new biofilm-inspired materials9.
Here, we address these questions using Vibrio cholerae, the causal agent of pandemic cholera and a model biofilm-forming organism10,11. Biofilm formation has been shown to be important for V. cholerae adhesion to chitinous surfaces in the aquatic environment;11 although not absolutely essential for colonizing the mammalian intestine, biofilm formation provides advantages for V. cholerae to thrive in this niche12,13,14. Even though surface attachment can be achieved by several other adhesive factors that function at the individual cell level15,16,17,18, we focus here on the molecular mechanism of biofilm-specific surface adhesins. The major biofilm phenotype in V. cholerae is dependent on Vibrio polysaccharide (VPS)19, which possesses a unique tetrasaccharide repeating unit20 and plays the primary role in controlling the structural integrity of V. cholerae biofilms21.
In addition to VPS, V. cholerae possesses two putative surface adhesins that function specifically in the biofilm context, Bap1 and RbmC22, which were thought to be largely redundant. The double-deletion mutant shows significantly impaired colony rugosity, an inability to adhere to abiotic surfaces, and a colonization defect in Drosophila melanogaster22,23,24,25. Puzzlingly, immunolabeling results show that their spatial distribution within biofilms differs significantly: while the Bap1 signal is concentrated at the biofilm-substrate interface, RbmC forms envelope-like structures surrounding the biofilm together with VPS and Bap126. It is unclear if and how the two adhesins function differently and why they are biofilm specific as opposed to classical adhesins that function at a cellular level. To pinpoint the structural basis underlying the adhesion mechanism, we recently obtained crystal structures of Bap1 and a lectin domain of RbmC27,28. Here, we combine insights from prior structural work with functional assays to show how V. cholerae uses two biofilm-specific adhesins with overlapping but distinct functions to achieve robust, diverse surface adhesion.
Bap1 and RbmC contain modular and overlapping domains
Figure 1a illustrates the domain organization of the two biofilm adhesins based on the crystal structure of Bap1 (Fig. 1b) and homology modeling of RbmC. Both proteins contain a conserved β-propeller domain with eight blades (~70% sequence identity between RbmC and Bap1 β-propellers) containing a Velcro closure β-strand that holds the first and last blades together forming a ring. Both proteins incorporate at least one β-prism domain, a putative sugar-binding fold widely found in nature and particularly in plant lectins. Interestingly, Bap1 contains a single β-prism domain while RbmC contains two, and the sequence of Bap1’s β-prism (abbreviated as β-prismB) diverges from those of the two β-prisms in RbmC (abbreviated as β-prismCs)27. Most notably, β-prismB contains an additional 57-amino acid (aa) sequence whose structure and function are unknown; this 57aa loop needed to be removed to produce soluble Bap1 protein for structure determination28. RbmC additionally has two tandem N-terminal β/γ-crystallin domains. The relative and collective roles of the various domains of Bap1 and RbmC remain unknown. To test the differing contributions of the two adhesins and the function of their constituent domains, we generated V. cholerae mutants in which one or multiple domains of Bap1 and RbmC are deleted or modified in the native locus (Supplementary Fig. 1), and whenever possible, we purified the corresponding mutant proteins or domain(s) from E. coli attached to a GFPUV label29. To focus on the biochemical mechanisms of biofilm adhesion rather than the effects of gene regulation, we mainly use a strain locked in a high cyclic diguanylate level that constitutively produces biofilms30.
A conserved β-propeller domain anchors Bap1 and RbmC to VPS
We first asked the question of what makes Bap1 and RbmC biofilm-specific and hypothesized that the key lies in the connection between the adhesins and the main structural component of the V. cholerae biofilm, VPS, through the conserved β-propeller domain. To support this hypothesis, we used several complementary methods. First, we added E. coli-purified domain(s) from Bap1 to mature V. cholerae biofilms and observed that any construct containing an intact β-propeller domain shows a positive staining signal; this staining disappears upon deletion of vpsL, one of the key biogenesis genes necessary for VPS production (Fig. 2a). Second, we tagged Bap1 with a 3×FLAG tag at its C-terminus and performed immunostaining; consistent with the prior literature, we observed envelope-like structures surrounding the biofilm cluster (Fig. 2b) and notably, this staining pattern only requires the presence of the β-propeller domain (Supplementary Fig. 2a). These results confirm that the β-propeller binds to VPS, either directly or indirectly, but not to the V. cholerae cell surface, thus explaining why Bap1 and RbmC are involved in biofilm adhesion but not the initial attachment of cells to substrates11.
To further investigate this interaction, we attempted to generate a Bap1 mutant in V. cholerae without the β-propeller domain; unfortunately, this construct is not properly secreted (Supplementary Fig. 2b), so we pursued an alternative strategy. We reasoned that deleting the Velcro closure should result in a secretable Bap1 with a nonfunctional β-propeller domain interrupting VPS interactions. Indeed, this Bap1ΔVelcro mutant is successfully secreted, but defective in adhering V. cholerae biofilms to the surface (Supplementary Fig. 2c–f). Interestingly, immunostaining shows that the Bap1ΔVelcro mutant still properly localizes at the biofilm-glass interface, but in the bulk of the biofilm it forms puncta-like structures on the order of 250–550 nanometers (Fig. 2b, Supplementary Fig. 2g, h), in contrast to the envelope pattern formed by wild-type (WT) Bap126. These results confirm that the VPS-β-propeller interaction is important for proper functioning and spatial localization of Bap1.
To test if the binding between VPS and the β-propeller domain is direct or through other intermediate factors, we performed an electrophoretic mobility shift assay (EMSA) with purified VPS and various purified domains of Bap1 with a GFP-tag under non-denaturing conditions (Fig. 2c). For constructs that contain the β-propeller, we observe a decrease in the intensity of the unbound protein bands and simultaneously, the emergence of slower moving, high molecular weight bands that do not enter the gel, indicating the formation of large aggregates31. In contrast, the β-prismB and GFP-only negative controls do not show this behavior. We confirmed this same observation with RbmC’s β-propeller (Supplementary Fig. 2i). These results provide evidence of direct binding between VPS and the β-propeller, which underlies why the two adhesins are specific to the biofilm lifestyle.
Bap1 possesses a unique 57aa loop with broad, nonspecific adhesion
We next probed the function of other domains in the two adhesins. To quantitatively assess the adhesive ability of Bap1 and RbmC mutants, we first performed a standard crystal violet assay for single and double deletions of bap1 and/or rbmC, and consistent with literature findings23,24, we observed a predominant contribution of Bap1 to adhesion to abiotic surfaces such as glass and plastics (Supplementary Fig. 3a, b). Therefore, we first focused on the contribution of Bap1’s different structural domains to surface adhesion in a ΔrbmC background. We grew biofilms of different mutants overnight on submerged glass surfaces and measured the fraction of adhered biomass remaining after vigorous washing for each mutant strain using confocal microscopy (Fig. 3a). To amplify differences in adhesion strength between the mutants, we challenged strains with increasing concentrations of Bovine Serum Albumin (BSA), as is commonly done to increase the stringency of washing in biochemical assays. We observe that the mutant missing the 57aa loop (bap1Δ57aa) is unable to remain adhered in the presence of BSA (open circles, Fig. 3a), consistent with its morphological differences compared to biofilms with a WT Bap1 (Supplementary Fig. 3c). On the other hand, a Bap1 construct in which we deleted the β-prismB and directly attached the 57aa loop to the β-propeller (bap1ΔprismB+57aa) is fully functional (closed circles, Fig. 3a). These results indicate that the 57aa loop, absent in RbmC, is the main contributor of biofilm adherence to abiotic surfaces in V. cholerae. Removal of both the β-prismB and the 57aa loop results in minimal adhesion (bap1ΔprismB, open squares, Fig. 3a). This behavior is reproducible on other abiotic surfaces such as polystyrene and modified glasses (Supplementary Fig. 3d). The loss of function in the defective mutants is unlikely due to changes in the production or secretion level of the mutant protein (Supplementary Fig. 4a–d), and in all defective strains the adhesion defects can be rescued by WT Bap1/RbmC expressed from a plasmid (Supplementary Fig. 4e).
To probe the underlying mechanism of these adhesion defects, we asked if our mutant constructs exhibited an altered localization pattern (Fig. 3b, c). Consistent with previous work, WT Bap1 is particularly concentrated at the biofilm-substrate interface while also forming envelope structures along with VPS around cell clusters23,24,26. In contrast, the Bap1Δ57aa mutant abolishes the immunosignal at the biofilm-glass interface while retaining staining at the periphery of the biofilm, suggesting that the mutant protein has a diminished tendency to adsorb to glass surfaces but has not lost its VPS-binding. The defect in adsorption likely underlies why Bap1Δ57aa is defective in anchoring biofilms to a substrate. Additionally, the Bap1ΔprismB+57aa mutant still exhibits a strong signal at the biofilm-substrate interface, consistent with its full function in adhesion assays. These observations reinforce the idea that the 57aa loop in Bap1 is the primary player in promoting V. cholerae biofilm adhesion to abiotic surfaces.
A closer look at the sequence of the 57aa loop reveals an abundance of aromatic and positively-charged residues (Fig. 3d) such as tyrosine (8.8%), tryptophan (8.8%), and lysine (12.7%). Both the function and the sequence of the 57aa loop is reminiscent of bivalve adhesion proteins: extensive work on adhesive mussel foot proteins (Mfps) highlights the importance of positively-charged residues, in conjunction with adjacent aromatic residues, in promoting adhesion to abiotic surfaces in aquatic environments32,33. The cap of the β-prismB domain adjacent to the 57aa loop also shares similar features, although to a lesser extent28. Therefore, we suggest that the β-prismB’s cap together with the 57aa loop may form a continuous, positively-charged and aromatic surface enabling Bap1 to adhere nonspecifically to environmental surfaces in a manner similar to Mfps.
To further demonstrate the adhesive properties of the 57aa loop, we chemically synthesized the 57aa peptide N-terminal labeled with fluorescein isothiocyanate (FITC) and developed a protocol to visualize and quantify its physical adsorption to microbeads using fluorescence (Fig. 3e, f, Supplementary Fig. 3e, f). Compared to the FITC control, we observed a strong tendency for the 57aa peptide to spontaneously coat silica beads. We repeated the adsorption assay with lipid-coated beads and observed an even stronger adhesion signal, suggesting that the 57aa loop may also allow V. cholerae to adhere to the plasma membrane of epithelial cell surfaces during infection. Indeed, the FITC-labeled 57aa stains the entire cell surface in human intestinal epithelial slices (Fig. 3g).
RbmC targets host cell surfaces via N-glycan and mucin-binding domains
Differences in the sequences of β-prismB and Cs lead us to hypothesize that RbmC and Bap1 will behave differently when interfacing with host surfaces that V. cholerae might encounter during infection. Our previous glycan array analysis indicated specific binding of β-prismCs to complex N-glycans prevalent on the surface proteins of host cells27. Subsequently, we showed that β-prismCs can bind to the core branch-region of N-glycans with nanomolar affinity, and we obtained crystal structures of N-glycan fragments bound to β-prismC227. Here, we first show that purified, GFP-tagged β-prismC1 and C2, but not β-prismB, shows specific binding to Caco-2 cells (Fig. 4a, Supplementary Fig. 5a). This binding is a direct consequence of N-glycan targeting because mutation of the key aspartate residue in the N-glycan binding pocket (for example D853 in β-prismC2) abolished Caco-2 cell binding (Fig. 4a). Consistent with the Caco-2 binding results, we also observed binding of the β-prismCs, but not β-prismB, to the surface of human small intestine jejunum cells (Supplementary Fig. 5b).
To test the glycan-binding ability of V. cholerae biofilms in vitro, we developed an assay by coating glass substrates with asialofetuin, an N-glycosylated protein34. Interestingly, the surface staining pattern of Bap1 and RbmC is reversed in the presence of asialofetuin compared to that on bare glass (Fig. 4b, c, Supplementary Fig. 6a): RbmC shows a strong signal concentrated at the surface of the asialofetuin-coated substrate, whereas Bap1 only shows a peripheral staining pattern around cell clusters, consistent with the different targets of these two proteins. The surface-concentrated RbmC signal on asialofetuin can be abolished by disrupting the N-glycan binding pocket (Supplementary Fig. 6b, c).
Besides differences in the β-prism domains outlined above, RbmC additionally contains two tandem β/γ crystallin domains (denoted as M1M2) at its N-terminus with homology to the C-terminal domain of StcE, a mucinase from E. coli (67.7% identity between M1 and M2, 58.5% identity between M1/M2 and StcE C-terminal domain)35,36. By staining human intestinal slices with fluorescently labeled proteins37, we find that both RbmCM1M2 and StcEC-term label the mucus layer surrounding the epithelial surface and especially Goblet cells that secrete mucus (Fig. 4d). Furthermore, the M1M2 signal largely colocalizes with that from a MUC2 antibody (Fig. 4e). A gel-shift assay similarly shows that both M1M2 and StcEC-term bind to commercially available bovine submaxillary mucin (Supplementary Fig. 5c). The mucus-targeting ability demonstrates another mechanism by which RbmC may contribute to biofilm adhesin during host colonization.
Bap1 and RbmC contribute to colonization in an enteroid monolayer model
To evaluate the validity of our findings in vivo, we employed a recently developed model of a two-dimensional intestinal epithelial (enteroid) monolayer38. This monolayer was derived from mouse jejunum crypts (Fig. 5a) and contains gut-like differentiated cell types including mucus-secreting goblet cells, crypt-like domains, and villus-like regions (Supplementary Fig. 7), therefore presenting biochemical features of the gut environment likely encountered by V. cholerae. The exposed apical surface allows us to study the encounter between V. cholerae and the enteroid monolayer with high-resolution imaging (Fig. 5b). With this setup, we found that the presence of the two adhesins (RbmC and Bap1) is critical for the adhesion of Vc biofilms to the model intestinal epithelia (Fig. 5c), and that the separate domains of RbmC and Bap1 contribute differently to biofilm adhesion. Specifically, by calculating the ratio of biomass on the monolayer before and after washing, we first show that the double mutant abolishes adhesion to the enteroid monolayer. Moreover, a single deletion of rbmC but not bap1 leads to a significant reduction in monolayer adhesion (Fig. 5d), suggesting that RbmC is the primary adhesin for colonizing enteroid monolayers (in contrast to results on abiotic surfaces). Furthermore, adhesion via rbmC depends on both the N-glycan targeting of the β-prismCs and the mucus-binding of M1M2, with the latter being the predominant factor (compare Δbap1, Δbap1 rbmCΔβ-prismC1C2, and Δbap1 rbmCΔM1M2 in Fig. 5d). Interestingly, the ΔvpsL mutant that makes no biofilm adheres at a comparable level to the parental strain. This indicates that other adhesive factors are functioning in the absence of VPS; however, when cells produce VPS in the biofilm state, assistance by biofilm-specific adhesins (mostly RbmC) is necessary to ensure proper adhesion to host surfaces.
Bap1 and RbmC have overlapping function but distinct mechanisms and distributions in other Vibrio species
Integrating all the evidence presented above, we propose a model in which RbmC and Bap1 facilitate V. cholerae biofilm adhesion to divergent types of external surfaces with their non-conserved domains while sharing a conserved β-propeller domain that binds VPS, thereby acting as unique bacterial “double-sided tape” (Fig. 1c, d). Specifically, we propose that Bap1 specializes in sticking to lipids and abiotic surfaces via a mussel-like chemistry while RbmC specializes in recognizing host surfaces via N-glycan-binding pockets in its β-prismCs and mucin-binding M1M2 domains. Consequently, V. cholerae biofilms can adhere to a wide range of foreign surfaces with different chemical properties. While most results were presented in the rugose background, we have confirmed the validity of our key conclusions in the WT background (Supplementary Fig. 8).
To put our findings into an evolutionary perspective, we performed bioinformatic analyses of Bap1 and RbmC homologs in the Vibrio genus. We found four other species that contain RbmC homologs (V. tubiashii, V. coralliilyticus, V. anguillarum, and V. mimicus) among the 21 species analyzed, with two other species showing weak partial hits (Supplementary Fig. 9a). One species, V. anguillarum, has both a RbmC homolog and a Bap1 homolog. Interestingly, the phylogenetic tree based on protein sequences (Supplementary Fig. 9b) shows a significant deviation from the species tree generated from the whole genome analysis39, suggesting that Bap1 has likely evolved through a gene duplication event from RbmC and subsequently acquired new functionalities. This neofunctionalization idea is consistent with another interesting genomic feature: while RbmC (VC0930) is located between the two VPS biogenesis clusters along with the other matrix proteins, Bap1 (VC1888) is located outside these clusters and flanked by unrelated genes. The presence of RbmC and Bap1 homologs in these Vibrio species suggests that they may use similar adhesion strategies to attach to their host in the marine environment by producing an exopolysaccharide similar to VPS.
In this paper, we use a combination of microscopy, bacterial genetics, and biochemical approaches to delve into the fundamentals of biofilm adhesion. We find that the biofilm adhesins in V. cholerae adopt a modular approach that, through evolution, acquired specialized functionalities to attach to diverse surfaces while maintaining their affinity for the native exopolysaccharide. This feature makes them biofilm-specific in contrast to classical adhesins that rely on direct anchoring on bacterial cell surface40. On the other hand, the two adhesins differ in the adhesive properties of accessory domains that interface with the external environment. Through this functional redundancy and diverse surface targeting, we suggest a strategy for how V. cholerae biofilms use multiple mechanisms to attach to both biotic and abiotic surfaces. It will be interesting to see if the double-sided-tape-like design is generalizable to other biofilms that rely on a synergy between extracellular proteins and polysaccharides.
Our results address many questions regarding V. cholerae biofilm adhesion but also present new ones. For example, the VPS-β-propeller binding might explain the close juxtaposition of RbmC and VPS signals in super-resolution microscopy26. It is likely that VPS-β-propeller binding is multivalent: previous data from mechanical measurements suggest crosslinking of VPS by RbmC/Bap141, which requires one RbmC/Bap1 molecule to bind to two or more VPS monomers. Further experiments are necessary to confirm this hypothesis. Another intriguing question arises as to whether VPS synthesized by one Vibrio species can be recognized by the β-propeller in another species; such crosstalk has been seen in autoinducer recognition during bacterial communication42. Also, it is interesting to compare our findings with those from the other matrix protein RbmA that binds VPS using FnIII domains43,44, a completely different sugar-binding motif. Regarding interactions with abiotic surfaces through the 57aa loop, while we have tested various synthetic surfaces, an interesting question for further study is whether the conclusions can be extended to chitinous surfaces that V. cholerae often colonizes in the oceanic environment10,17.
The structural homology and similar functions of RbmCM1M2 and StcEC-term hint at a broad molecular strategy of mucus interactions. A BLAST search using the StcEC-term sequence reveals not only its presence in RbmC of other Vibrio species, many of which colonize and infect marine animals with exposed mucus layers, but also in a range of infectious species including Shigella, Salmonella, Streptococcus, and Listeria. This suggests that this domain may be a broadly utilized, yet not-well-characterized mucin-targeting mechanism in multiple pathogens36. Future structural, mutagenesis, and glycobiology work is needed to illuminate the exact glycopeptide epitope recognized by this mucus-binding domain.
In addition to the enteroid colonization assay, we also performed small intestinal colonization assays in infant mice;45 however, consistent with prior literature13,21, we did not find a statistically significant colonization defect of the Δbap1ΔrbmC mutant compared to WT. Whole-animal models are known to be imperfect for studying V. cholerae adhesins due to the dominant role of toxin-coregulated pili (TCP) in colonizing the host; TCP often masks the contribution of other adhesive factors, which have been shown to be important for host adhesion in cell culture systems46,47. Future work on visualizing the spatial distribution of the different mutants in mice may address this discrepancy. The successful colonization of the ΔvpsL mutant on enteroid monolayers is consistent with the involvement of other adhesive factors such as GbpA15,48 and OmpU46. However, our results emphasize that the colonization of the biofilm population relies critically on Bap1 and RbmC, because the VPS molecules surrounding the biofilm lack an adhesive property and may at the same time physically obstruct other adhesins from functioning. Because colonization of V. cholerae involves both planktonic and biofilm populations and the latter population is more infectious12,49, our results suggest that biofilm-specific adhesins can work synergistically with well-known classical adhesins to contribute to V. cholerae pathogenicity.
All V. cholerae strains used in this study were derivatives of the WT V. cholerae O1 biovar El Tor strain C6706str2 and listed in Supplementary Table 1. The rugose strain background harbors a missense mutation in the vpvC gene (vpvCW240R) that elevates intracellular c-di-GMP levels30. The rugose strains form robust biofilms and thus allow us to focus on the biochemical mechanisms governing biofilm adhesion rather than mechanisms involving gene regulation. Additional mutations were genetically engineered into this V. cholerae strain using the natural transformation (MuGENT) method50.
All strains were grown overnight in lysogenic broth (LB) at 37 °C with shaking. 1× M9 salts were filter sterilized and supplemented with 2 mM MgSO4 and 100 µM CaCl2 (abbreviated as M9 medium below). Biofilm growth was generally performed in M9 medium supplemented with 0.5% glucose. For complementation experiments, 100 µg/mL Kanamycin was used.
Linear PCR products were constructed using splicing-by-overlap extension (SOE) PCR as previously described and used as transforming DNA (tDNA) in chitin-dependent transformation reactions50. Briefly, SOE PCR was performed by amplifying an upstream region of homology and a downstream region of homology. The desired mutations were incorporated into the primers used in amplification. All primers used to construct and detect mutant alleles are listed in Supplementary Table 2. For chitin-dependent transformation, individual V. cholerae colonies were grown in LB media at 30 °C for 6 h to an OD600 = 0.8–1.0. Cells were washed with Instant Ocean (IO) solution and then incubated with chitin particles suspended in IO for 8–16 h at 30 °C before the tDNA was added. The cultures were then incubated at 30 °C for an additional 8–16 h. LB was added to the cultures and incubated at 37 °C for 2 h before plating on LB agar with the appropriate antibiotic. The desired mutants were selected by the emergence of new phenotype or colony PCR screening and confirmed by sequencing and complementation.
Biofilm adhesion assay
Overnight cultures of the indicated strains constitutively expressing mNeonGreen were grown from individual colonies at 37 °C with shaking in 1.5 mL LB. 50 µL from each culture was used to inoculate 1.5 mL of M9 medium supplemented with 0.5% glucose and grown at 30 °C with shaking until the OD600 was between 0.1 and 0.3. The cultures were then diluted to an OD600 \(\cong\) 0.001. 100 μL of the regrown culture was aliquoted into the wells of a 96-well plate with a glass bottom (MatTek P96G-1.5-5-F) and incubated at 30 °C for 1 h. The wells were then washed twice with M9 medium and replaced with M9 medium with 0.5% glucose and 0, 0.2, 0.4, 0.6, 0.8, 1, or 1.2 mg/mL BSA. In the complementation experiment, the growth medium additionally contains 0.2% arabinose for PBAD-bap1. The lid was secured with a layer of parafilm and the 96-well plate was subsequently incubated at 30 °C for 16–24 h. Thus-prepared samples were imaged with a spinning disk confocal microscope (Nikon Ti2-E connected to Yokogawa W1) using a 60× water objective (numerical aperture = 1.20) and a 488 nm laser excitation. For each sample, several locations with 3 × 3 tiles where imaged and captured with a sCMOS camera (Photometrics Prime BSI). The x-y pixel size was 0.22 μm and the z-step size was 3 μm. The wells were then washed twice with M9 medium and re-imaged at the same locations. All images presented in this study are raw data rendered using the Nikon Elements software.
NaOH treatment of glass substrates
For a subset of experiments (Supplementary Fig. 3b,d), the surface of the 96-well plate was treated with NaOH to render it more hydrophilic and negatively charged51. Briefly, before adding the cell culture, 100 µL of 1 M NaOH aqueous solution was added to the wells and incubated at room temperature for 3 h, after which the wells were washed with DI water until the pH was neutral.
Quantification of adhesion assays
Image analysis was performed with built-in functions of the Nikon Elements software by thresholding each image layer-by-layer and measuring the total binarized area above the threshold in each layer. The binary area for each sample z-slice was then summed to give the total biovolume, and the ratio of the total biovolume after versus before the washing step was calculated.
Growth of WT V. cholerae biofilms
To verify our findings in the WT background, we generated all Bap1 mutants in the WT C6706 background. All strains were grown in LB medium at 30 °C with shaking overnight. 50 µL from each culture was used to inoculate 1.5 mL of M9 medium supplemented with 0.5% glucose and 0.5% casamino acids and grown at 30 °C with shaking until the OD600 was between 0.1 and 0.3. Growth of WT V. cholerae biofilms was performed according to a published protocol with modifications52. The inoculants previously described were introduced into microfluidic channels (channel dimensions: 1 cm in length, 400 µm in width, and 60 µm in height) through the outlet without inoculating the inlet. The cells were allowed 1 h to attach, after which sterile inlet and outlet polytetrafluoroethylene tubing was connected to the microfluidic chamber. M9 medium supplemented with 0.5% glucose and 0.5% casamino acids, with or without 0.4 mg/mL BSA, was flowed through the channel at a flow rate of 0.6 µL/min controlled by a syringe pump. After 16 h growth at 30 °C, the microfluidic channels were transferred to a spinning disk confocal microscope, with which the biomass was imaged and quantified using procedures similar to those described above. One exception was that the cell layer directly adhered to the glass surface was excluded from the analysis, because cells in this layer mostly attach to surfaces as individual cells via pili rather than as biofilms53,54.
Biofilm staining with purified proteins
V. cholerae biofilms from cells constitutively expressing mScarlet-I were grown as described above. After overnight biofilm growth, the growth media was replaced with 100 µL of M9 media containing 1 µM of purified GFP-tagged Bap1 domain constructs. The samples were incubated for 30 min at room temperature. The media containing protein was then removed and replaced with fresh M9 media. The samples were imaged with a spinning disk confocal microscope using a 60× water objective and a 488 nm laser excitation to observe protein localization and a 561 nm laser excitation to observe the biofilm, with the corresponding filters.
In situ biofilm immunostaining
Overnight cultures of the indicated strains with WT or mutated rbmC or bap1 tagged with 3×FLAG at the C-terminus and constitutively expressing mNeonGreen were grown following the same procedure as described above. The initial incubation time was 10 or 30 min when biofilms were grown in the presence of asialofetuin or BSA, respectively. The wells were washed twice with M9 medium; subsequently, 100 µL of M9 medium with 0.5% glucose and 1 mg/ml asialofetuin (Sigma-Aldrich A4781) or 0.5 mg/ml BSA (Sigma-Aldrich A9647) was added to the well. BSA and asialofetuin spontaneously coat the surface under these conditions. Both conditions included 2 µg/mL anti-FLAG antibody conjugated to Cy3 (Sigma-Aldrich A9594). The lid was secured with a layer of parafilm and incubated at 30 °C for 16–24 h for asialofetuin and 40–48 h for BSA samples. Thus-prepared samples were imaged with a spinning disk confocal microscope (Nikon Ti2-E connected to Yokogawa W1) using a 100× oil immersion objective (numerical aperture = 1.35) or a 60× water immersion objective (numerical aperture = 1.20) and a 488 nm laser excitation to observe the cells and a 561 nm laser excitation to observe protein localization, with the corresponding filters. The images were captured with a sCMOS camera (Photometrics Prime BSI) at a z-step size of 0.5 µm.
Quantification of protein distribution in biofilms
We used the in situ immunostaining image stacks for quantifying protein distribution using built-in functions of the Nikon Element software. First, background noise in the 561 nm channel was measured by taking images in locations without any biofilms and subtracted from the data. Next, a circular region of interest was manually defined that contains a single biofilm cluster. To be consistent, we only included biofilms of similar heights (25–30 µm) in the analysis. Subsequently, anti-FLAG-Cy3 signals at the glass surface ± 0.5 µm were added and the total signal over the entire biofilm height was integrated; the ratio between the two values was calculated to quantify the ability of the adhesin to preferentially localize at the biofilm-glass interface. The sizes of the puncta in the bap1ΔVelcro biofilms (Supplementary Fig. 2h) were manually measured using built-in tools in Nikon Element Software.
Crystal violet assay
The indicated V. cholerae strains were grown on LB agar plates at 37 °C, and individual colonies were picked to inoculate culture tubes with 3 mL LB and glass beads. The cultures were grown at 37 °C with shaking until exponential phase (OD600~0.5). 1 × 3-inch glass slides were cut into similar sizes, washed with ethanol, and flame sterilized before being inserted into sterile culture tubes containing 1 mL LB. Exponential phase cultures were used to inoculate the cell culture tubes with the glass slides at an OD600 = 0.01 (for example, 20 µL of a culture at OD600 = 0.5 was used to inoculate the tube containing 1.0 mL LB and a glass slide). The cultures were grown statically at 37 °C for 16 h. One at a time, the glass slides were carefully removed and washed 3 times with DI water, stained with 1.5 mL of a 0.1% crystal violet solution for 10 min, washed 3 times with DI water, and transferred to a fresh tube containing 1.5 mL of 30% acetic acid to dissolve the stain associated with the pellicles. The stained acetic acid solution was then transferred to a 1.5 mL cuvette to measure the OD550.
Western blots and secretion assay
V. cholerae strains encoding the indicated constructs with a C-terminal 3×FLAG tag were grown in culture tubes containing 3 mL LB and sterile glass beads overnight at 30 °C. The next day, cultures were vortexed to break up pellicles and cell clusters and the OD600 was measured. 1 mL of cell suspensions were transferred to a sterile 1.5 mL microcentrifuge tube and spun at 18,000 × g for 3 min. 500 μL of the cell supernatant was transferred to a fresh 1.5 mL microcentrifuge tube and the rest discarded from the pellet. The cell pellets were resuspended to an OD600 = 10 and lysed for 30 min using a lysis solution (1× Bugbuster solution, lysozyme (0.05-0.1 mg/mL), and benzonase (≥ 250 units/mL)). 30 μL of each cell suspension was combined with 10 μL of 4× SDS PAGE sample buffer (40% Glycerol, 240 mM Tris pH 6.8, 8% SDS, 0.04% Bromophenol Blue, 5% β-mercaptoethanol) and boiled for 10 min at 95 °C. Samples were run on a 4–15% Mini-PROTEAN TGX gel in 1× SDS PAGE running buffer (25 mM Tris, 192 mM Glycine, 1% SDS, pH 8.3) at 120 V for 70 min. The proteins were transferred to a PVDF membrane in 1× Transfer buffer (25 mM Tris, 192 mM Glycine, 10% methanol, pH 8.3) at 100 V for 1 h. The membranes were incubated in 5% milk in TBST overnight at 4 °C. The membranes were washed 3 × 10 min in 1× TBST. The membranes were blotted using α-DYKDDDDK (BioLegend 637311) at 0.1 μg/mL in TBST with 3% BSA for 1 h at room temperature and washed 3 × 10 min with 1× TBST. Blots were developed by incubation with Super Signal PLUS Pico West Chemiluminescent Substrate for 5 min and pictures taken using the BioRad Chemidoc-MP. Analysis of sample signal was performed in ImageJ.
E. coli protein expression and purification
GFPUV-tagged proteins were cloned, expressed, and purified in E. coli27,28 with the exception of new clones listed in Supplementary Table 1. New constructs were made by PCR from V. cholerae genomic DNA or previously cloned genes using primers listed in Supplementary Table 2 and traditional sticky-end cloning into the GFPUV fusion vector pNGFP-BC55. RbmCβ-propeller was made using a two-step PCR stitching reaction with primers listed in Supplementary Table 2. Clones containing inserts were confirmed by DNA sequencing. For expression and purification, LB media supplemented with 100 μg/mL carbenicillin was inoculated with overnight cultures grown at 37 °C to an OD600 of 0.5–0.6, induced with 1 mM IPTG, and grown at 18 °C overnight. Cells were pelleted at 5462 × g in a Sorvall LYNX 6000 centrifuge (F9-6×1000 LEX rotor) for 15 min and lysed by passing three times through an Emulsiflex-C5 high-pressure homogenizer (Avestin, Inc.). Lysate was cleared at 41656 × g for 30 min at 4 °C (F20-12 × 50 LEX rotor). The resulting supernatant was loaded onto a 5 mL HisTrap Ni-NTA column (GE Healthcare) equilibrated in 1× TBS (20 mM Tris-HCl, pH 7.8, 150 mM NaCl) and washed with 1× TBS containing 40 mM imidazole. Protein was eluted with 15 mL of 1× TBS containing 250 mM imidazole. Protein samples were further purified over a Sepharose S6 10/300 size-exclusion column (GE Healthcare) preequilibrated with 1× TBS. Protein fractions were pooled after assessing purity using an SDS-PAGE gel.
Fluorescent labeling of RbmCM1M2
Purified RbmCM1M2 was fluorescently labeled by primary-amine chemistry using an Alexa Fluor 488 TFP ester reagent (Thermo Scientific A37570). Prior to labeling, purified RbmCM1M2 was buffer exchanged into 1× phosphate-buffered ½ saline (10 mM Na2HPO4, 1.8 mM KH2PO4, 2.7 mM KCl, and 75 mM NaCl, pH 8.3). For labeling, 1 mg/mL of RbmCM1M2 was used. While stirring, 100 μg of the dye (resuspended in 10 μL DMSO) was added to 600 μL of protein-containing solution and incubated for 1 h at room temperature. Unreacted dye was removed from labeled proteins by running over a Superose 6 10/300 size exclusion column equilibrated with 1× phosphate-buffered ½ saline.
Caco-2 cell culturing and staining
Human colonic epithelial Caco-2 cells (ATCC HTB-37) were obtained from ATCC and authenticated by ATCC based on morphology, doubling time, and STR profiling. Caco-2 cells were cultured in flasks containing Dulbecco’s Modified Eagle’s Medium (DMEM; Gibco) supplemented with 10% (v/v) heat-inactivated fetal bovine serum (FBS-HI; Gibco) at 37 °C in a humidified 5% CO2 incubator. After 72 h, cells were collected via dissociation using TrypLE Express (Gibco) and pelleted by centrifugation (300 rcf, 3 min, room temperature in 15 mL conical tubes (Corning); then 21,000 rcf, 2 min, room temperature in Eppendorf tubes). Cell pellets were stored at −80 °C prior to further analysis.
To stain Caco-2 cells with purified proteins, a frozen aliquot of Caco-2 cells as prepared above was gently thawed and then added to 1 mL of M9 medium containing 300 nM DAPI and incubated for 5 min at room temperature. 100 µL of this cell suspension was aliquoted to sterile 1.5 mL microcentrifuge tubes and spun at 10,000 × g for 3 min. The staining media were removed and replaced with 100 µL of M9 media containing 1 mg/mL BSA and 1 µM of purified GFP-tagged Bap1/RbmC β-prism domain constructs or GFP alone. The samples were incubated for 30 min at room temperature and then the media was replaced with 100 µL fresh M9 medium and transferred to the wells of a 96-well plate. The samples were imaged with a spinning disk confocal microscope using a 60× water objective and a 405 nm laser excitation to observe the Caco-2 cell nuclei and a 488 nm laser excitation to observe protein localization, with the corresponding filters.
All animal work was approved by Yale University’s Institutional Animal Care and Use Committee. CD1 (Charles River) mice of both sexes, aged 4-12 weeks were used in this study. CD1 IGS mice were purchased from Charles River Laboratories, Strain 022 and were bred for up to two generations within the Yale Animal Resource Center. Mice were maintained in ventilated Techniplast limit racks with ambient temperature of 22 °C and 50%±10% humidity in a barrier facility with 12 h light/dark cycles. They were given ad libitum access to food and water.
Enteroid monolayer generation and culture
96-well Black/clear plates (Corning 353219) were coated with 30 µL growth factor reduced Matrigel (Corning 356231) diluted 1:5 in Basal organoid medium. Plates were incubated at 37 °C for at least 1 h to allow Matrigel to polymerize. Basal organoid medium was comprised of: advanced DMEM/F12 (Thermo Fisher 12634010) supplemented with 1× N-2 supplement (Thermo Fisher 17502-048), 1× B-27 supplement (Thermo Fisher 17504044), 10 mM HEPES (AmericanBio AB6021-00100), 1× Glutamax (Thermo Fisher 35050061), 1 mM N-acetyl-cysteine (Sigma Aldrich A9165), and 1× Penicillin/Streptomycin (Thermo Fisher 15140-122).
Enteroid monolayers were generated as described previously38 with modifications. Briefly, ~4 cm of jejunum was removed from 4 to 12 week old mice, flushed with ice-cold PBS and cut open longitudinally to expose the epithelium. The tissue was scraped with a 22 × 22 mm coverslip to remove villi and placed in PBS + 3 mM EDTA at 4 °C with rotation for 30 min. The tissue was then manually shaken with forceps in a 6 cm petri dish to release villi. The PBS was replaced to deplete villar fractions. This process was repeated until the PBS contained mostly crypts by visual inspection. The solution containing crypts was strained through a 70 µm filter (Fisher) and centrifuged at 300 × g for 3 min to pellet crypts. Crypts were resuspended in 2D attachment media, which consisted of basal organoid media (above) supplemented with 50 ng/mL EGF (Thermo Fisher PMG8041), 100 nM LDN-193189 (Cayman, 11802), 1 µg/mL R-spondin 1 (R&D Systems, 3474-RS-050), 10 µM CHIR99021 (Cayman, 13122), and 10 µM Y27632 (Tocris, 1254). 100 µL of resuspended crypts were added to each Matrigel-coated well of a 96-well plate and incubated at 37 °C for 4 h. The wells were then washed 3 times with PBS and placed in supplemented ENR media for the remainder of the culture. Supplemented ENR media was comprised of basal organoid media plus 50 ng/mL EGF, 50 ng/mL Noggin (R&D Systems, 6057-NG-100), and 1 µg/mL R-spondin 1. Media was replaced every other day and put into antibiotic-free media the morning of the bacterial colonization experiments.
Staining and visualization of fixed monolayers
After four days of culture, monolayers were fixed for 10 min in 4% paraformaldehyde (PFA). After washing in 1× PBS, monolayers were incubated in blocking buffer (3% BSA, 5% NDS, 5% NGS, 0.2% Triton X-100 in PBS) for 45 min. Cells were incubated in primary antibody diluted in blocking buffer for 2 h at RT. Wells were washed with 1× PBS + 0.2% Triton X-100 and incubated for 5 min. This step was repeated three times. Secondary antibodies were diluted in blocking buffer and incubated on monolayers for 45 min. Primary antibodies used were as follows: CD44v6 1:100 (Invitrogen, BMS145), Villin 1:400 (BD Biosciences, 610358), Muc2 1:1000 (Abcam, ab272692). Secondary antibodies were all used at 1:200: Rhodamine Red X D anti Rt (Jackson Immunoresearch 712-295-153), Alexa Fluor 488 D anti Rb (Jackson Immunoresearch, 711-545-152), Alexa 647 D anti Rb (Jackson Immunoresearch, 711-605-152). DAPI was used 1:500 (Thermo Fisher, D1306). Stained monolayers were stored in 1× PBS and imaged on an inverted Leica Stellaris 5 using Leica LASX Version 220.127.116.1108 with white light laser using a 25×/0.95 HC Fluotar water immersion objective.
For protein staining, the samples were washed once with 1× PBS. After the wash, the samples were fixed with pre-warmed 4% PFA in 1× PBS for 10 min. The fixation solution was removed, and the samples incubated in 1× PBST containing 0.2% Triton X-100 for 10 min at room temperature. Monolayers were then blocked in 1% BSA in 1× PBS for 30 min with shaking, before being incubated in staining solution containing 300 nM DAPI, 1 mg/mL BSA, 0.66 μM Alexa Fluor 647 phalloidin (Invitrogen, A22287) and 1 μM of purified protein in 1× PBS. The monolayers were washed with 1× PBS twice before imaging. The samples were imaged with a spinning disk confocal microscope using a 60× water objective and a 405 nm laser excitation to observe monolayer nuclei, a 488 nm laser excitation to observe protein localization, and a 647 nm laser excitation to observe actin, with the corresponding filters.
Colonization of enteroid monolayers
The indicated V. cholerae strains constitutively expressing mNeonGreen were grown overnight at 30 °C on LB agar with the appropriate antibiotic. An isolated colony from each strain was used to inoculate 1.5 mL of LB with glass beads (4 mm, MP Biomedical) and grown with shaking for 16–18 h at 30 °C. For each strain, small glass beads (acid-washed, 425–500 μm, Sigma) were added to a 1.5 mL microcentrifuge tube up to the 100 µL line. 30 µL of each culture was added to 1.5 mL of M9 medium supplemented with 0.5% glucose and vortexed to mix. 500 µL of the culture was added to each microcentrifuge tube with acid-washed beads and grown with shaking for 16–18 h at 30 °C. The overnight culture was bead bashed using a Disruption Genie for 10 min at 3000 rpm. Once bashed, the cultures were left on the bench for 5 min to allow the beads to settle. The bashed liquid culture was then removed from the top of the beads and added to a fresh 1.5 mL microcentrifuge tube. The bead-bashing step is necessary to break up large biofilm clusters that may have emerged during overnight growth. Using the separated culture, the OD600 for each strain was measured. The remaining overnight culture was pelleted at 18,000 × g for 90 s. The cell supernatant was removed before the cells were resuspended to the original OD600 in pre-warmed DMEM. The resuspended cultures were diluted for colonization to an OD600 = 0.3 in 100 µL of DMEM.
To colonize the monolayers, the supernatant was carefully removed from each well with the selected monolayer and the bacterial culture was added slowly into the well. The bacteria were allowed to be in contact with the monolayers at 37 °C for 60–75 min to establish adhesion. Once the incubation period was complete, the samples were imaged with a spinning disk confocal microscope using a 60× water objective (N.A. = 1.20) and 488 nm laser excitation to observe bacterial localization and a brightfield camera to observe monolayer boundaries, with the corresponding filters. The samples were then carefully washed twice with pre-warmed DMEM and re-imaged at the same locations. Quantification of adhesion to monolayers was performed in a procedure similar to described above, with several modifications: The boundary of the monolayer was manually traced for each imaged area, and only biomass within the boundary was used for adhesion quantification. Additionally, the largest biofilm cluster was excluded from quantification for each sample to prevent large, floating clusters from artificially decreasing the adhesion quantification for each strain.
For actin staining of colonized monolayers, the monolayers were incubated for 30 min at room temperature with rocking in a staining solution of 1 μM DAPI and 0.66 μM Alexa Fluor 647 phalloidin (Invitrogen, A22287) in 1×PBS with 1 mg/mL BSA. Monolayers were carefully washed with 1×PBS twice. The samples were imaged with a spinning disk confocal microscope using a 60× water objective and a 405 nm laser excitation to observe monolayer nuclei, a 488 nm laser excitation to observe bacterial localization, and a 647 nm laser excitation to observe actin, with the corresponding filters.
Staining and visualization of jejunum tissue slices
Pre-fixed human jejunum tissue slices were obtained from Novus Biologicals (NBP2-30201). Prepared slides were deparaffinized according to the manufacturers protocol. Briefly, the slides were dried for 1 h at 60 °C and then soaked in xylene 5 × 4 min. The slides were then hydrated in 100%, 95%, and 75% ethanol 2 × 3 min and immersed in water for 5 min. Staining solutions containing 4 µg/mL FM 4-64, 300 nM DAPI, 1 mg/mL BSA and 1 μM of purified protein in 1×PBS were added to the slides and incubated for 30 min at room temperature. Slides were carefully washed twice with 1×PBS. The samples were imaged with a spinning disk confocal microscope using a 60× water objective and a 405 nm laser excitation to observe the intestinal cells’ nuclei, a 561 nm laser excitation to observed cell membranes, and a 488 nm laser excitation to observe the protein localization, with the corresponding filters.
For antibody staining, the slides were incubated with shaking in 1×PBS with 1 mg/mL BSA for 30 min at room-temperature. A staining solution of diluted primary antibody in 1×PBS with 1 mg/mL BSA was then added to the slides and slides were incubated with rocking for 1 h at room temperature. Slides were carefully washed three times with 1×PBS for 5 min each. After washing, the slides were incubated with rocking in a staining solution of diluted secondary antibody in 1×PBS with 1 mg/mL BSA for 1 h at room temperature. Slides were carefully washed three times with 1×PBS for 5 min each. Slides were then stained with relevant proteins following the protocol previously described. The samples were imaged with a spinning disk confocal microscope using a 10× objective and a 405 nm laser excitation to observe intestinal cells’ nuclei, a 488 nm laser excitation to observe M1M2-GFP localization, and a 647 nm laser excitation to observe MUC2 localization, with the corresponding filters.
Microbead adsorption assay
Chemically synthesized peptides (Atlantic Peptides) were dissolved and stored in DMSO at 150 µM and diluted 100× into M9 media immediately before the adsorption assay. 100 µL of M9 media containing 1.5 µM of FITC-labeled peptide or FITC and 0.01% (weight percent) 5 µm silica microspheres (Polysciences 25348) was shaken in Eppendorf tubes for 30 min at room temperature. The sample was then bath sonicated for 20 min with ice before transferring to a NaOH-treated 96-well plate with a glass bottom (MatTek P96G-1.5-5-F) and allowed to settle at room temperature for 5 min before imaging. Thus-prepared samples were imaged with a spinning disk confocal microscope (Nikon Ti2-E connected to Yokogawa W1) using a 60× oil objective (numerical aperture = 1.40) and a 488 nm laser excitation or bright field. For each sample, at least three locations were imaged and captured with a sCMOS camera (Photometrics Prime BSI). Each field of view contained roughly 100–150 beads.
Lipid-coated microbead adhesion assay
Silica microbeads were coated with lipid layers according to published protocols with modification56. Briefly, 75 mol% PC (Avanti Polar Lipids 840051), 25 mol% PI (Avanti Polar Lipids 840042), and >0.1 mol% L-α-phosphatidylethanolamine-N-(lissamine rhodamine B sulfonyl) (abbreviated as RhPE, Avanti Polar Lipids 810146) were mixed in chloroform in a glass vial prerinsed with chloroform. A light stream of nitrogen was used to remove excess solvent, followed by at least 2 h in a vacuum desiccator. Lipids were hydrated for 30 min at 37 °C at a final lipid concentration of 5 mM in buffer (20 mM Tris, pH 8.0, 300 mM KCl, and 1 mM MgCl2) with vortexing and agitation roughly every 5 min and probe sonicated to clarity (4 min, with intermittent breaks) to form small unilamellar vesicles (SUVs). SUVs were adsorbed onto 5 µm silica microspheres by mixing 50 nmol lipids with 440 mm2 of silica microspheres surface area in a final volume of 80 µL and 1 h rotary shaking at room temperature. Excess SUVs were removed by pelleting coated beads for 30 s at 862 × g followed by washing 4 times with excess buffer (100 mM KCl and 50 mM Tris, pH 8.0). 100 µL buffer (100 mM KCl, 50 mM Tris, pH 8.0, 0.1% methylcellulose (Sigma-Aldrich M7027), 0.1% BSA) with 1.5 µM of FITC-labeled peptide and 0.01% lipid-coated beads was transferred to a NaOH-treated 96-well plate with a glass bottom and incubated for at least 1 h at room temperature. Thus-prepared samples were imaged with a spinning disk confocal microscope (Nikon Ti2-E connected to Yokogawa W1) using a 60× water objective and a 488 nm laser excitation or a 561 nm laser excitation. For each sample, at least three locations were imaged and captured with a sCMOS camera (Photometrics Prime BSI). Each field of view contained roughly 100–150 beads.
Quantification of bead adsorption assay
The background signal due to the camera in the 488 nm channel was measured by taking images of M9 medium and quantifying it with built-in functions of the Nikon Element software. After subtracting the background signal, the signal intensity per unit area in the adsorption layer of the beads and in the solution was calculated using MATLAB and the difference was determined to give the excess surface signal.
VPS purification was performed according to a published protocol with several modifications20. First, a rugose ΔrbmAΔbap1ΔrbmCΔpomA strain was used as the starting strain for easier separation of cells and VPS and to avoid confounding factors due to matrix proteins. This strain was grown in LB at 30 °C overnight. 50 µL of this inoculum was added into 3 mL of LB liquid medium containing glass beads, and the cultures were grown with shaking at 30 °C for 3–3.5 h. 50 µL of this inoculum was applied to an agar plate containing M9 medium with 0.5% glucose and 0.5% casamino acids and shaken with glass beads to enable growth of a biofilm covering the entire plate. Plates were incubated at 30 °C for 2 days to form a continous bacterial lawn. For each purification batch, 10 plates were used. The biofilms were scraped off the agar plates carefully and resuspended in 1× PBS. Biofilm cells were collected by centrifugation (5000 × g, 4 °C, 45 min). The supernatant was clarified with additional centrifugation (8000 × g, 4 °C, 45 min) and dialyzed for 2 days against distilled water using a dialysis cassette (10 kDa MWCO) with repeated water changes. The dialyzed sample was lyophilized to prepare crude VPS extract. The crude extract was dissolved in 10 mM Tris buffer at 1.5 mg/mL, treated with DNAse and RNAse (37 °C, 24 h), and then Proteinase K (37 °C, 48 h), followed by ultracentrifugation at 100,000 × g for 1 h to remove lipopolysaccharide. This solution was dialyzed against water for 3 days and lyophilized to provide VPS for the binding assay. For each purification batch, typically 10 mg of VPS was obtained as a white powder after the final lyophilization step. The VPS solutions were heated at 95 °C for 10 min to denature Proteinase K before use.
VPS or BSM binding assays
Gels were prepared with a final concentration of 10% acrylamide (Bio-Rad) in the running gel and 5% in the stacking gel. The native running buffer contained 25 mM Tris-HCl, pH 8.3, and 192 mM glycine. The native loading buffer was made with 62.5 mM Tris-HCl, pH 6.8, 25% glycerol and 1% bromophenol blue dye. Samples for the gel-shift assay were prepared with 5 μg of protein per sample. For the VPS gradient, 0, 0.0625, 0.125, 0.25, 0.50, 1, and 5 µg of VPS was preincubated with the representative protein for 5 min. For the BSM gradient, 0, 0.5, 1, 2, 4, 6, 8, and 10 μg of BSM was preincubated with RbmCM1M2 for 5 min. For the GFP control, the highest amount of VPS or BSM was used. For testing different polysaccharides, 5 µg (highest amount used in the VPS concentration gradients) was preincubated with the Bap1Δ57aa (5 μg) for 5 min. Gel electrophoresis was performed at 85 V for 4 h in an ice bath. Images were acquired on gels (still encapsulated in glass) with an excitation wavelength of 492 nm and an emission wavelength of 513 nm using a Typhoon FLA 9000 imaging system (GE Healthcare).
Bap1 or RbmC protein sequences from V. cholerae were used as a query to BLAST against each of the 20 genomes of Vibrio species39. BLAST hits with an E-value lower than 1e‒15 and alignment coverage (fraction of overlapping positions over the sequence alignment length) higher than 80% of the query were recorded as significant hits - the query gene is recovered in the target genome. Blast hits with an E value higher than 1e‒15 but lower than 1e‒5 were recorded as potential hits of the query gene with low conservation. A protein sequence alignment containing significant hits and the query sequence was manually examined to confirm the recovery of the query gene. The Bap1 protein with a 6aa insertion in V. cholerae O16 str. 877-163 was recovered from a BLAST search against NCBI nr database.
Statistics and reproducibility
Error bars correspond to standard deviations from measurements taken from distinct samples. Standard t-tests were used to compare treatment groups and are indicated in each figure legend. Tests were always two-tailed, unpaired, and used Welch’s correction, as demanded by the details of the experimental design. All statistical analyses were performed using GraphPad Prism software. Microscopy images were shown from representative results from at least three independent experiments.
Further information on research design is available in the Nature Portfolio Reporting Summary linked to this article.
Source data are provided with this paper.
All bacterial strains constructed as part of this work will be provided to the community upon request in a timely fashion and shipped in accordance with biosafety standards and regulations.
Ghannoum, M., Parsek, M., Whiteley, M. & Mukherjee, P. Microbial Biofilms. (ASM Press, 2015).
Hall-Stoodley, L., Costerton, J. W. & Stoodley, P. Bacterial biofilms: From the natural environment to infectious diseases. Nat. Rev. Microbiol. 2, 95–108 (2004).
Costerton, J. W., Stewart, P. S. & Greenberg, E. P. Bacterial biofilms: A common cause of persistent infections. Science 284, 1318–1322 (1999).
Flemming, H.-C. et al. Biofilms: an emergent form of bacterial life. Nat. Rev. Microbiol. 14, 563–575 (2016).
Wong, G. C. L. et al. Roadmap on emerging concepts in the physical biology of bacterial biofilms: from surface sensing to community formation. Phys. Biol. 18, 1478–3975 (2021).
Jiang, Z., Nero, T., Mukherjee, S., Olson, R. & Yan, J. Searching for the secret of stickiness: How biofilms adhere to surfaces. Front. Microbiol. 12, 1642 (2021).
Flemming, H.-C. & Wingender, J. The biofilm matrix. Nat. Rev. Microbiol. 8, 623–633 (2010).
Dufrêne, Y. F. & Persat, A. Mechanomicrobiology: How bacteria sense and respond to forces. Nat. Rev. Microbiol. 18, 227–240 (2020).
Huang, J. et al. Programmable and printable Bacillus subtilis biofilms as engineered living materials. Nat. Chem. Biol. 15, 34–41 (2019).
Nelson, E. J., Harris, J. B., Morris, J. G., Calderwood, S. B. & Camilli, A. Cholera transmission: The host, pathogen and bacteriophage dynamic. Nat. Rev. Microbiol. 7, 693–702 (2009).
Teschler, J. K. et al. Living in the matrix: assembly and control of Vibrio cholerae biofilms. Nat. Rev. Microbiol. 13, 255–268 (2015).
Gallego-Hernandez, A. L. et al. Upregulation of virulence genes promotes Vibrio cholerae biofilm hyperinfectivity. Proc. Natl. Acad. Sci. USA 117, 11010–11017 (2020).
Barrasso, K. et al. Impact of a human gut microbe on Vibrio cholerae host colonization through biofilm enhancement. eLife 11, e73010 (2022).
Zhu, J. & Mekalanos, J. J. Quorum sensing-dependent biofilms enhance colonization in Vibrio cholerae. Dev. Cell 5, 647–656 (2003).
Kirn, T. J., Jude, B. A. & Taylor, R. K. A colonization factor links Vibrio cholerae environmental survival and human infection. Nature 438, 863–866 (2005).
Thelin, K. H. & Taylor, R. K. Toxin-coregulated pilus, but not mannose-sensitive hemagglutinin, is required for colonization by Vibrio cholerae O1 El Tor and O139 strains. Infect. Immun. 64, 2853–2856 (1996).
Adams, David., Stutzmann, W., Stoudmann, C. & Blokesch, M. DNA-uptake pili of Vibrio cholerae are required for chitin colonization and capable of kin recognition via sequence-specific self-interaction. Nat. Microbiol. 4, 1545–1557 (2019).
Kitts, Giordan et al. A conserved regulatory circuit controls large adhesins in Vibrio cholerae. mBio 10, e02822–19 (2019).
Yildiz, F. H. & Schoolnik, G. K. Vibrio cholerae O1 El Tor: Identification of a gene cluster required for the rugose colony type, exopolysaccharide production, chlorine resistance, and biofilm formation. Proc. Natl. Acad. Sci. USA 96, 4028–4033 (1999).
Yildiz, F., Fong, J., Sadovskaya, I., Grard, T. & Vinogradov, E. Structural characterization of the extracellular polysaccharide from Vibrio cholerae O1 El-Tor. PLoS ONE 9, e86751 (2014).
Fong, J. C. N., Syed, K. A., Klose, K. E. & Yildiz, F. H. Role of Vibrio polysaccharide (vps) genes in VPS production, biofilm formation and Vibrio cholerae pathogenesis. Microbiology 156, 2757–2769 (2010).
Fong, J. C. N. & Yildiz, F. H. The rbmBCDEF gene cluster modulates development of rugose colony morphology and biofilm formation in Vibrio cholerae. J. Bacteriol. 189, 2319–2330 (2007).
Absalon, C., Van Dellen, K. & Watnick, P. I. A communal bacterial adhesin anchors biofilm and bystander cells to surfaces. PLoS Pathog. 7, e1002210 (2011).
Yan, J., Sharo, A. G., Stone, H. A., Wingreen, N. S. & Bassler, B. L. Vibrio cholerae biofilm growth program and architecture revealed by single-cell live imaging. Proc. Natl. Acad. Sci. USA 113, e5337–e5343 (2016).
Purdy, A. E. & Watnick, P. I. Spatially selective colonization of the arthropod intestine through activation of Vibrio cholerae biofilm formation. Proc. Natl. Acad. Sci. USA 108, 19737–19742 (2011).
Berk, V. et al. Molecular architecture and assembly principles of Vibrio cholerae biofilms. Science 337, 236–239 (2012).
De, S., Kaus, K., Sinclair, S., Case, B. C. & Olson, R. Structural basis of mammalian glycan targeting by Vibrio cholerae cytolysin and biofilm proteins. PLOS Pathog. 14, e1006841 (2018).
Kaus, K. et al. The 1.9 Å crystal structure of the extracellular matrix protein Bap1 from Vibrio cholerae provides insights into bacterial biofilm adhesion. J. Biol. Chem. 294, 14499–14511 (2019).
Crameri, A., Whitehorn, E. A., Tate, E. & Stemmer, W. P. C. Improved green fluorescent protein by molecular evolution using DNA shuffling. Nat. Biotechnol. 14, 315–319 (1996).
Beyhan, S. & Yildiz, F. H. Smooth to rugose phase variation in Vibrio cholerae can be mediated by a single nucleotide change that targets c-di-GMP signalling pathway. Mol. Microbiol. 63, 995–1007 (2007).
Nero, T. M. et al. ComM is a hexameric helicase that promotes branch migration during natural transformation in diverse Gram-negative species. Nucleic Acids Res. 46, 6099–6111 https://doi.org/10.1101/2021.12.28.21268436 (2018).
Lee, B. P., Messersmith, P. B., Israelachvili, J. N. & Waite, J. H. Mussel-inspired adhesives and coatings. Annu. Rev. Mater. Res. 41, 99–132 (2011).
Gebbie, M. A. et al. Tuning underwater adhesion with cation–π interactions. Nat. Chem. 9, 473–479 (2017).
Yet, M. G., Chin, C. C. & Wold, F. The covalent structure of individual N-linked glycopeptides from ovomucoid and asialofetuin. J. Biol. Chem. 263, 111–117 (1988).
Nason, R. et al. Display of the human mucinome with defined O-glycans by gene engineered cells. Nat. Commun. 12, 4070 (2021).
Yu, A. C. Y., Worrall, L. J. & Strynadka, N. C. J. Structural insight into the bacterial mucinase StcE essential to adhesion and immune evasion during enterohemorrhagic E. coli infection. Structure 20, 707–717 (2012).
Shon, D. J. et al. An enzymatic toolkit for selective proteolysis, detection, and visualization of mucin-domain glycoproteins. Proc. Natl. Acad. Sci. USA 117, 21299 (2020).
Thorne, C. A. et al. Enteroid monolayers reveal an autonomous WNT and BMP circuit controlling intestinal epithelial growth and organization. Dev. Cell 44, 624–633.e4 (2018).
Lin, H., Yu, M., Wang, X. & Zhang, X.-H. Comparative genomic analysis reveals the evolution and environmental adaptation strategies of Vibrios. BMC Genomics 19, 135 (2018).
Foster, T. J., Geoghegan, J. A., Ganesh, V. K. & Hook, M. Adhesion, invasion and evasion: the many functions of the surface proteins of Staphylococcus aureus. Nat. Rev. Microbiol. 12, 49–62 (2014).
Yan, J. et al. Bacterial biofilm material properties enable removal and transfer by capillary peeling. Adv. Mater. 30, 1804153 (2018).
Papenfort, K. & Bassler, B. L. Quorum sensing signal-response systems in Gram-negative bacteria. Nat. Rev. Microbiol. 14, 576–588 (2016).
Smith, D. R. et al. In situ proteolysis of the Vibrio cholerae matrix protein RbmA promotes biofilm recruitment. Proc. Natl. Acad. Sci. USA 112, 10491–10496 (2015).
Fong, J. C. et al. Structural dynamics of RbmA governs plasticity of Vibrio cholerae biofilms. eLife 6, e1002210 (2017).
Klose, K. E. The suckling mouse model of cholera. Trends Microbiol. 8, 189–191 (2000).
Sperandio, V., Girón, J. A., Silveira, W. D. & Kaper, J. B. The OmpU outer membrane protein, a potential adherence factor of Vibrio cholerae. Infect. Immun. 63, 4433–4438 (1995).
Cont, A., Rossy, T., Al-Mayyah, Z. & Persat, A. Biofilms deform soft surfaces and disrupt epithelia. eLife 9, e56533 (2020).
Bhowmick, R. et al. Intestinal adherence of Vibrio cholerae involves a coordinated interaction between colonization factor GbpA and mucin. Infect. Immun. 76, 4968–4977 (2008).
Tamayo, R., Patimalla, B. & Camilli, A. Growth in a biofilm induces a hyperinfectious phenotype in Vibrio cholerae. Infect. Immun. 78, 3560–3569 (2010).
Dalia, A. B., McDonough, E. & Camilli, A. Multiplex genome editing by natural transformation. Proc. Natl. Acad. Sci. USA 111, 8937–8942 (2014).
Hau, W. L. W., Trau, D. W., Sucher, N. J., Wong, M. & Zohar, Y. Surface-chemistry technology for microfluidics. J. Micromech. Microeng. 13, 272–278 (2003).
Tai, J.-S. B. et al. Social evolution of shared biofilm matrix components. Proc. Natl. Acad. Sci. USA 119, e2123469119 (2022).
Floyd, K. A. et al. c-di-GMP modulates type IV MSHA pilus retraction and surface attachment in Vibrio cholerae. Nat. Commun. 11, 1549 (2020).
Yan, J., Nadell, C. D. & Bassler, B. L. Environmental fluctuation governs selection for plasticity in biofilm production. ISME J. 11, 1569–1577 (2017).
Kawate, T. & Gouaux, E. Fluorescence-detection size-exclusion chromatography for precrystallization screening of integral membrane proteins. Structure 14, 673–681 (2006).
Bridges, A. A., Jentzsch, M. S., Oakes, P. W., Occhipinti, P. & Gladfelter, A. S. Micron-scale plasma membrane curvature is recognized by the septin cytoskeleton. J. Cell Biol. 213, 23–32 (2016).
J.Y. holds a Career Award at the Scientific Interface from the Burroughs Wellcome Fund. J.Y. acknowledges support from National Institutes of Health (DP2GM146253). Additional support was provided to R.O. by Wesleyan University Grants in Support of Scholarship funds. W.L.N. acknowledges support from National Institutes of Health (R01AI121337). We thank Drs. Herbert Waite and Günter Wagner for the helpful discussions. We thank Dr. Stavroula Hatzios for providing the Caco-2 cells. We thank Drs. Weimin Zhong, Christopher Waters, and Carey Nadell for suggestions on the manuscript.
Some content of the manuscript (regarding the 57aa) has been included in a provisional patent application, US Application Number: 63/376,414 (pending). Name of Inventors: J.Y. and R.O.; The remaining authors declare no competing interests.
Peer review information
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Huang, X., Nero, T., Weerasekera, R. et al. Vibrio cholerae biofilms use modular adhesins with glycan-targeting and nonspecific surface binding domains for colonization. Nat Commun 14, 2104 (2023). https://doi.org/10.1038/s41467-023-37660-0