Time-periodic corner states from Floquet higher-order topology

The recent discoveries of higher-order topological insulators (HOTIs) have shifted the paradigm of topological materials, previously limited to topological states at boundaries of materials, to include topological states at boundaries of boundaries, such as corners. So far, all HOTI realisations have been based on static systems described by time-invariant Hamiltonians, without considering the time-variant situation. There is growing interest in Floquet systems, in which time-periodic driving can induce unconventional phenomena such as Floquet topological phases and time crystals. Recent theories have attempted to combine Floquet engineering and HOTIs, but there has been no experimental realisation so far. Here we report on the experimental demonstration of a two-dimensional (2D) Floquet HOTI in a three-dimensional (3D) acoustic lattice, with modulation along a spatial axis serving as an effective time-dependent drive. Acoustic measurements reveal Floquet corner states with double the period of the underlying drive; these oscillations are robust, like time crystal modes, except that the robustness arises from topological protection. This shows that space-time dynamics can induce anomalous higher-order topological phases unique to Floquet systems.

Indicate the start and stop dates of data collection, noting the frequency and periodicity of sampling and providing a rationale for these choices. If there is a gap between collection periods, state the dates for each sample cohort. Specify the spatial scale from which the data are taken If no data were excluded from the analyses, state so OR if data were excluded, describe the exclusions and the rationale behind them, indicating whether exclusion criteria were pre-established.
Describe the measures taken to verify the reproducibility of experimental findings. For each experiment, note whether any attempts to repeat the experiment failed OR state that all attempts to repeat the experiment were successful.
Describe how samples/organisms/participants were allocated into groups. If allocation was not random, describe how covariates were controlled. If this is not relevant to your study, explain why.
Describe the extent of blinding used during data acquisition and analysis. If blinding was not possible, describe why OR explain why blinding was not relevant to your study.
Describe the study conditions for field work, providing relevant parameters (e.g. temperature, rainfall).
State the location of the sampling or experiment, providing relevant parameters (e.g. latitude and longitude, elevation, water depth).
Describe the efforts you have made to access habitats and to collect and import/export your samples in a responsible manner and in compliance with local, national and international laws, noting any permits that were obtained (give the name of the issuing authority, the date of issue, and any identifying information).
Describe any disturbance caused by the study and how it was minimized.
Describe all antibodies used in the study; as applicable, provide supplier name, catalog number, clone name, and lot number.
Describe the validation of each primary antibody for the species and application, noting any validation statements on the manufacturer's website, relevant citations, antibody profiles in online databases, or data provided in the manuscript.
State the source of each cell line used.
Describe the authentication procedures for each cell line used OR declare that none of the cell lines used were authenticated.
Confirm that all cell lines tested negative for mycoplasma contamination OR describe the results of the testing for mycoplasma contamination OR declare that the cell lines were not tested for mycoplasma contamination.
Name any commonly misidentified cell lines used in the study and provide a rationale for their use. Tick this box to confirm that the raw and calibrated dates are available in the paper or in Supplementary Information.

Ethics oversight
Note that full information on the approval of the study protocol must also be provided in the manuscript.

Animals and other organisms
Policy information about studies involving animals; ARRIVE guidelines recommended for reporting animal research Laboratory animals

Wild animals
Field-collected samples

Ethics oversight
Note that full information on the approval of the study protocol must also be provided in the manuscript.

Human research participants
Policy information about studies involving human research participants Population characteristics

Recruitment
Ethics oversight Note that full information on the approval of the study protocol must also be provided in the manuscript.

Clinical data Policy information about clinical studies
All manuscripts should comply with the ICMJEguidelines for publication of clinical research and a completedCONSORT checklist must be included with all submissions.

Clinical trial registration
Study protocol Data collection

Outcomes
Dual use research of concern Policy information about dual use research of concern Hazards Provide provenance information for specimens and describe permits that were obtained for the work (including the name of the issuing authority, the date of issue, and any identifying information). Permits should encompass collection and, where applicable, export.
Indicate where the specimens have been deposited to permit free access by other researchers.
If new dates are provided, describe how they were obtained (e.g. collection, storage, sample pretreatment and measurement), where they were obtained (i.e. lab name), the calibration program and the protocol for quality assurance OR state that no new dates are provided.
Identify the organization(s) that approved or provided guidance on the study protocol, OR state that no ethical approval or guidance was required and explain why not.
For laboratory animals, report species, strain, sex and age OR state that the study did not involve laboratory animals.
Provide details on animals observed in or captured in the field; report species, sex and age where possible. Describe how animals were caught and transported and what happened to captive animals after the study (if killed, explain why and describe method; if released, say where and when) OR state that the study did not involve wild animals.
For laboratory work with field-collected samples, describe all relevant parameters such as housing, maintenance, temperature, photoperiod and end-of-experiment protocol OR state that the study did not involve samples collected from the field.
Identify the organization(s) that approved or provided guidance on the study protocol, OR state that no ethical approval or guidance was required and explain why not.
Describe the covariate-relevant population characteristics of the human research participants (e.g. age, gender, genotypic information, past and current diagnosis and treatment categories). If you filled out the behavioural & social sciences study design questions and have nothing to add here, write "See above." Describe how participants were recruited. Outline any potential self-selection bias or other biases that may be present and how these are likely to impact results.
Identify the organization(s) that approved the study protocol.
Provide the trial registration number from ClinicalTrials.gov or an equivalent agency.
Note where the full trial protocol can be accessed OR if not available, explain why.
Describe the settings and locales of data collection, noting the time periods of recruitment and data collection.
Describe how you pre-defined primary and secondary outcome measures and how you assessed these measures.
Could the accidental, deliberate or reckless misuse of agents or technologies generated in the work, or the application of information presented in the manuscript, pose a threat to:

Experiments of concern
Does the work involve any of these experiments of concern: No Yes Demonstrate how to render a vaccine ineffective Confer resistance to therapeutically useful antibiotics or antiviral agents Enhance the virulence of a pathogen or render a nonpathogen virulent Confirm that both raw and final processed data have been deposited in a public database such as GEO.
Confirm that you have deposited or provided access to graph files (e.g. BED files) for the called peaks.

Data access links
May remain private before publication.

Files in database submission
Genome browser session For "Initial submission" or "Revised version" documents, provide reviewer access links. For your "Final submission" document, provide a link to the deposited data.
Provide a list of all files available in the database submission.
Provide a link to an anonymized genome browser session for "Initial submission" and "Revised version" documents only, to enable peer review. Write "no longer applicable" for "Final submission" documents.
Describe the experimental replicates, specifying number, type and replicate agreement.
Describe the sequencing depth for each experiment, providing the total number of reads, uniquely mapped reads, length of reads and whether they were paired-or single-end.
Describe the antibodies used for the ChIP-seq experiments; as applicable, provide supplier name, catalog number, clone name, and lot number.
Specify the command line program and parameters used for read mapping and peak calling, including the ChIP, control and index files used.
Describe the methods used to ensure data quality in full detail, including how many peaks are at FDR 5% and above 5-fold enrichment.
Describe the software used to collect and analyze the ChIP-seq data. For custom code that has been deposited into a community repository, provide accession details.

March 2021
Flow Cytometry Plots Confirm that: The axis labels state the marker and fluorochrome used (e.g. CD4-FITC).
The axis scales are clearly visible. Include numbers along axes only for bottom left plot of group (a 'group' is an analysis of identical markers).
All plots are contour plots with outliers or pseudocolor plots.
A numerical value for number of cells or percentage (with statistics) is provided.