Abstract
Bicyclo[1.1.1]pentanes (BCPs) are important motifs in contemporary drug design as linear spacer units that improve pharmacokinetic profiles. The synthesis of BCPs featuring adjacent stereocenters is highly challenging, but desirable due to the fundamental importance of 3D chemical space in medicinal chemistry. Current methods to access these high-value chiral molecules typically involve transformations of pre-formed BCPs, and can display limitations in substrate scope. Here we describe an approach to synthesize α-chiral BCPs involving the direct, asymmetric addition of simple aldehydes to [1.1.1]propellane, the predominant BCP precursor. This is achieved by combining a photocatalyst and an organocatalyst to generate a chiral α-iminyl radical cation intermediate, which installs a stereocenter simultaneously with ring-opening of [1.1.1]propellane. The reaction proceeds under mild conditions, displays broad scope, and provides an array of α-chiral BCPs in high yield and enantioselectivity. We also present a theoretical model for stereoinduction in this mode of photoredox organocatalysis.
Similar content being viewed by others
Introduction
Bicyclo[1.1.1]pentanes (BCPs) have become established as useful bioisosteres for 1,4-disubstituted arenes1,2,3,4,5, alkynes6, and tert-butyl7 groups in the design of functional molecular scaffolds, particularly in drug discovery (Fig. 1a)8,9. Compounds containing this rigid three-dimensional motif, which often exhibit improved pharmacochemical profiles compared to their parent functionalities10, are most commonly accessed by ring-opening reactions of the inter-bridgehead bond of [1.1.1]propellane (1, tricyclo[1.1.1.01,3]pentane)11,12,13,14. Despite many recent advances in the preparation of BCPs15,16,17,18,19,20,21,22,23,24,25,26,27,28, the asymmetric synthesis of α-chiral variants (which would serve as surrogates for benzylic, propargylic, or neopentylic stereocenters) is highly challenging; current approaches entail lengthy synthetic routes involving chemical resolution processes29 or the use of stoichiometric chiral auxiliaries/reagents (Fig. 1b)17,18,30,31. Only two methods have been described that enable the catalytic asymmetric synthesis of α-chiral BCPs (Fig. 1c); these consist of a rhodium-catalyzed C–H insertion of α-diazoesters into the bridgehead C–H bond of 3-aryl-BCPs to give α-chiral BCP esters32, and an iridium-catalyzed asymmetric allylation of BCP-zinc complexes33 (formed in situ from addition of aryl Grignards to 1 at elevated temperatures)6 to form enantioenriched allyl-BCP derivatives.
The enantioselective synthesis of α-chiral BCPs via stereoselective ring-opening reactions with 1 represents an attractive route to access these high-value compounds. As the addition of radicals to 1 is typically highly efficient and proceeds under mild conditions21,23, we questioned whether a direct asymmetric radical addition could simultaneously generate the BCP motif and the adjacent stereocenter (Fig. 1d). Enantioselective α-carbonyl functionalizations of aldehydes through singly occupied molecular orbital (SOMO) activation have been shown to be highly selective and efficient radical reactions for a range of asymmetric transformations34,35. Furthermore, the combination of this strategy with photoredox catalysis enables these reactions to proceed with simple, unactivated coupling partners, and without the need for stoichiometric oxidants36,37,38,39. We envisaged that this type of multicatalytic strategy, employing a photocatalytically generated α-iminyl radical cation as a key intermediate36,40,41,42,43, could be utilized to access a wide variety of α-chiral BCPs directly from [1.1.1]propellane.
Our design for this catalytic route to α-chiral BCPs first involves condensation of an aldehyde with a chiral organocatalyst to form an electron-rich enamine 2 (Fig. 2), which then undergoes single-electron oxidation by an excited-state photocatalyst to generate an α-iminyl radical cation 3 (refs. 36,40,41,42,43). This radical cation could undergo addition to the central C–C bond of 1 to construct the BCP and set the adjacent stereocenter in the same step (4). This process would depend critically on the SOMOphilic character of 1, as aside from heterodimerization of radicals generated from electron donor–acceptor complexes42,43, only activated alkenes (styrenes)36 or stable radicals (TEMPO)40,41 have been shown to react efficiently with chiral α-iminyl radical cations. To complete the organo- and photoredox catalytic cycles, a third process would be incorporated whereby the tertiary BCP radical 4 undergoes a reductive hydrogen atom transfer (HAT)37,44,45, affording the enantioenriched product 5 after hydrolysis of iminium ion 6. The radical derived from the HAT catalyst can then oxidize the photocatalyst, regenerating the ground state complex; the HAT catalyst would be reformed via protonation by a proton source such as the organocatalyst pyrrolidinium ion. It is crucial that these three catalytic cycles operate simultaneously and in a highly selective manner, as a number of undesirable side reactions could take place; these include reactions between the different catalysts (in particular, the HAT catalyst) and [1.1.1]propellane itself, and interception of the bicyclopentyl radical 4 by further equivalents of [1.1.1]propellane, leading to oligomeric bicyclo[1.1.1]pentanes (staffanes, 7)14. Here we describe the successful development of this methodology, which offers an efficient method for the direct asymmetric synthesis of α-chiral BCPs from ring-opening of [1.1.1]propellane. The reaction exhibits broad scope and affords excellent levels of enantioselectivity, enabling the synthesis of a range of previously inaccessible enantioenriched BCP products that are of high value for pharmaceutical research.
Results
Reaction optimization
Our investigations began with the reaction of aldehyde 8 and two equivalents of [1.1.1]propellane (as a solution in Et2O) in the presence of the photocatalyst Ir[(ppy)2(dtbbpy)]PF6 (2 mol%), organocatalyst 9 (25 mol%), and HAT catalyst 10 (10 mol%), with 1,2-dimethoxyethane (DME) as a co-solvent (2:1 DME:Et2O, 0.2 M). Under blue LED irradiation (LED strips), we were pleased to find that the desired BCP product 11 was obtained with high enantioselectivity (89% ee), albeit in low yield (Fig. 3a Table, Entry 1); reduction of the aldehyde product to the corresponding alcohol was carried out to facilitate purification and avoid potential epimerization of the newly formed stereocenter. Use of a more powerful 18 W blue LED lamp, and a lower reaction temperature (10 °C) dramatically improved the yield (Entry 2). An extensive survey of reaction variables was then carried out (entries 3–5 and panels b–d; see Supplementary Tables 1–7, for full details). We first found that thiols outperformed other classes of HAT catalysts (Fig. 3b, reactions run at 50 mol% loading of HAT catalyst), including several that have been widely used as H-atom sources in other radical reactions. Sterically hindered thiophenol 10 remained the optimal HAT catalyst from this screen; notably the thiol-BCP adduct resulting from the direct reaction of 10 with [1.1.1]propellane24 was not observed under the reaction conditions (see Supplementary Fig. 1). We next evaluated a range of organocatalysts (Fig. 3c, reactions run at 25 mol% loading of organocatalyst), which revealed that the size of the silyl ether substituent (OTMS), and the nature of the arene substitution (3,5-CF3) of the diarylprolinol were crucial for high yield and selectivity. The choice of photocatalyst (Fig. 3d) was also of key importance, with iridium complexes featuring a dtbbpy (4,4′-di-tert-butyl-2,2′-bipyridine) ligand proving most effective. The reaction performed well in ethereal solvents (Fig. 3d, 2:1 ratio of co-solvent to Et2O from [1.1.1]propellane solution), and a mixture of DME and Et2O (2:1 or 1:1) was identified as ideal to ensure solubility of the reactants (see Supplementary Table 5 for further discussion). Employing 1 as the limiting reactant led to an additional improvement in yield, while maintaining high enantioselectivity (Entries 6 and 7). A series of control experiments confirmed that all three catalysts were required, with no or only trace reaction observed with the omission of any catalyst (Entries 8–10). Under the optimized reaction conditions (Entry 7), we obtained the α-chiral BCP product 11 in 89% ee and 94% yield based on [1.1.1]propellane. As 1 is the most valuable component of the reaction system, and has the potential to undergo a number of side reactions, this efficiency is notable.
Substrate scope
We found that this asymmetric construction of α-chiral BCPs was successful with aldehyde substrates bearing a wide range of functional groups (Fig. 4a). The α-functionalized products were generally obtained in high yields, and with excellent levels of enantioselectivity. Simple alkyl aldehydes performed well in the reaction (12–15, 63–96%, 64–98% ee), including more sterically demanding substrates 13 and 14, although only modest selectivity was obtained when the aldehyde α-carbonyl substituent was a methyl group (12, 63%, 64% ee). Aldehydes bearing aryl (16–18, 72–99%, 90–96% ee), alkenyl (19, 70%, 90% ee), and alkynyl (20, 50%, 90% ee) moieties also afforded the corresponding BCP products in good yields and high selectivities. Substrates featuring various heteroatom functionalities, including thioethers, carbamates, halides, esters, and ethers were successful in the reaction, again delivering BCP products with high efficiency and enantioselectivity (11, 21–26, 83–99%, 86–97% ee). Particularly notable is the formation of enantioenriched BCP piperidine 25, a class of heterocyclic product that is of importance in pharmaceutical research. Substrates bearing heteroaromatic motifs were found to be more challenging: while furanyl-BCP 27 was obtained in 89% yield and 95% ee, the formation of thiophenyl and pyridinyl products 28 and 29 was lower yielding, albeit proceeding with excellent enantioselectivities (25–29%, 90–96% ee). The reaction can be successfully scaled up with no reduction in yield or enantioselectivity, with alcohol 16 prepared in 98% yield and 96% ee on a 1 mmol scale. To further expand the potential of this chemistry, we considered other methods to trap the bicyclopentyl radical resulting from addition of the α-iminyl radical cation to 1. Using N-(phenylthio)phthalimide instead of the HAT catalyst, we were able to obtain sulfur-substituted BCP product 30 in 50% yield and 88% ee; this reaction presumably proceeds by attack of the BCP radical on the S–N bond, leading to a phthalimidyl radical that is also capable of catalyst turnover (E°[Ir(III)/Ir(II)] = –1.51 V vs. SCE46; E°[SuccN•/SuccN–] of the related succinimidyl radical has been measured as +1.96 V vs. SCE)47. These results show that this methodology offers a versatile route to access α-chiral bicyclo[1.1.1]pentanes containing a wide variety of functional groups directly from [1.1.1]propellane and commercially available or easily accessible starting materials and catalysts.
Product derivatization
To demonstrate the utility of the α-chiral BCP products, we explored transformations of the enantioenriched aldehyde obtained directly from the photoredox reaction (Fig. 4b). Aldehyde 31 could be oxidized to the carboxylic acid without racemization of the stereocenter (32, 97%, 95% ee), and also underwent reductive amination with benzylamine to afford secondary amine 33 in 93% yield and 92% ee. The reaction of 31 with an aryl Grignard reagent proceeded with excellent diastereoselectivity, giving secondary alcohol 34 in 95% yield (94% ee, 14:1 dr) under Felkin-Anh control. Lastly, 31 could be homologated to alkyne 35, again without erosion of enantiopurity (97%, 96% ee). Such α-chiral BCP products are likely to be of high value for various applications.
Mechanistic studies and DFT calculations
As discussed above, we propose that the mechanism of this reaction involves initial oxidation of the enamine to the α-iminyl radical cation by the excited state Ir(III) complex (E°[Ir(III)*/Ir(II)] = +0.66 V vs. SCE46; E°[α-iminyl radical cation/propanal enamine] = +0.77 V vs. SCE48; ∆E° = –0.11 V). Stern-Volmer fluorescence quenching experiments reveal the enamine to be the most efficient quencher of this photoexcited Ir(III) complex, with a quenching constant of 83.4 M–1 – 10 times more efficient than the next-best quencher in the reaction (see Supplementary Information, Section 5). Addition of the α-iminyl radical cation to 1 leads to a bicyclopentyl radical, which abstracts a hydrogen atom from the thiol HAT catalyst to deliver the BCP product; the thiyl radical that results is a competent species for catalyst turnover (E°[PhS•/PhS–] = +0.16 V vs. SCE49; E°[Ir(III)/Ir(II)] = –1.51 V vs. SCE46; ∆E° = +1.67 V). Finally, the sulfide ion is reprotonated by an acid such as the pyrrolidinium ion derived from organocatalyst 9.
While this sequence offers a viable pathway for product formation, our optimization work showed that the enantioselectivity of the reaction is dependent on a number of factors, including the nature of the aldehyde sidechain, the pyrrolidine organocatalyst substituents, and the photocatalyst. To rationalize this, we turned to computational analysis (for a full discussion of the methodology and models employed, see the Supplementary Information, Section 4). While enamine isomerization via the iminium ion is likely to be rapid, calculations on a model system revealed E/Z isomerization of the α-iminyl radical cation itself to be slow, with a barrier higher than the subsequent trapping of 1 (see Supplementary Fig. 3). Addition of 1 to either the E- or Z-α-iminyl radical cation can potentially occur from either the ‘open’ or ‘closed’ face (Fig. 5a), resulting in four pathways (Si-E, Re-E, Re-Z, and Si-Z) that lead to two diastereomers of the BCP radical product. However, stabilizing non-covalent interactions (NCIs) between the substrate sidechain and the electron-deficient diarylprolinol substituents enhance shielding of the closed face of the α-iminyl radical cation. While formation of the major enantiomer could thus occur through either a Si-E or Si-Z transition state (TS), the latter pathway is strongly disfavored due to both 1,3-allylic strain, and the abovementioned steric hindrance to closed-face attack, and therefore has a negligible contribution.
Due to the slow isomerization between the E- and Z-iminyl radical cations, the observed stereoselectivity could be influenced by the relative rates of (irreversible) oxidation of the two enamines, and/or by the facial selectivity of addition of 1 to the E-α-iminyl radical cation. In the case where addition to the closed face is highly disfavored due to substrate/diarylprolinol NCIs (such that reaction occurs only via the open face Si-E or Re-Z pathways), the enantiomeric ratio (er) is then equal to the ratio of observed enamine oxidation rates (k1,E/k1,Z, Case 1, Fig. 5a). This is defined by the ratio of intrinsic electron transfer rates, kSET,E/kSET,Z multiplied by the equilibrium constant for the E/Z enamine population (Keq = [E-enamine]/[Z-enamine]); in other words, (k1,E/k1,Z) ≪ (kSi-E/kRe-E). However, where weaker NCIs are present, the energy difference between open and closed face addition is less such that (k1,E/k1,Z) ≫ (kSi-E/kRe-E), and the observed er is approximated by the ratio of Si-E and Re-E rate constants (kSi-E/kRe-E, Case 2). If (k1,E/k1,Z) and (kSi-E/kRe-E) are similar in magnitude, the minor enantiomer will be formed through both the Re-Z and Re-E pathways.
To investigate these factors, we calculated the equilibrium constant (Keq) for the enamines derived from organocatalyst 9 and substrate 8′ – a methyl carbamate (Moc) analog of substrate 8 used for reaction optimization (94%, 89% ee) – and Si-E and Re-E TSs for the addition of 1 to the resulting E-iminyl radical cations. To obtain a model for each TS, the forming C–C distance was constrained to that obtained from calculations on a simplified system with a large basis set, followed by exhaustive conformational sampling to obtain the lowest energy transition states for the formation of each diastereomer of the product (for a validation of this approach see Supplementary Fig. 6). Keq was found to favor the E-enamine by ∆GE/Z = 3.9 kcal mol–1 (Keq = 989 at 283 K). The subsequent Si-E pathway is favored over the Re-E pathway by 4.9 kcal mol–1 (kSi-E/kRe-E = 5612 at 283 K), and as a result the stereoselectivity for this substrate is described by Case 1. The strong preference for open face addition arises from stabilizing C–H⋯F and C–H⋯O NCIs between the α-iminyl radical cation sidechain and the diarylprolinol substituents (Fig. 5b). Notably, polar functionality is not a prerequisite for high selectivity: a simple linear alkyl sidechain on the aldehyde also provides sufficient favorable dispersion and C–H⋯F interactions to avoid closed-face Re-E addition (see Supplementary Fig. 12), a finding that is consistent with the excellent ee observed for the reaction with octanal (97%, product 15).
When the trifluoromethyl groups of organocatalyst 9 are replaced with hydrogen atoms (i.e. a phenyl ring, 9-H), substrate–diarylprolinol NCIs are weakened. The major enantiomer still arises from open face Si-E attack (TS-8′-H, Fig. 5b), but closed face (Re-E) addition is disfavored by only 0.4 kcal mol−1 (kRe-E/kSi-E = 2.2 at 283 K, 34% eecalc), offering a low-energy pathway for the formation of the minor enantiomer. This predicted value supports the experimentally observed enantioselectivity using this organocatalyst (see Fig. 3c, 44% ee). Here the Si-E/Re-Z pathway competition, which is controlled by the k1,E/k1,Z ratio, becomes inconsequential (∆GE/Z = 4.8 kcal mol–1, Keq = 5092 at 283 K).
For case 1 (substrate 8 or 8′/organocatalyst 9), we initially expected the rates of E- and Z-enamine oxidation to be approximately equal such that only Keq affects the enantioselectivity. However, this scenario leads to a predicted ee of 99.8% for the reaction with substrate 8’. The experimentally observed ee of 89% appears to suggest that oxidation of the Z-enamine is ~50 times faster than the E-enamine (kSET,E/kSET,Z = 0.017) – a phenomenon that could explain the variation in enantioselectivity with the photocatalyst, as the oxidation rates of the Z- and E-enamines would depend on the exact nature of the photocatalyst used. A more rapid oxidation of the Z-enamine may indeed be a reasonable expectation, as upon oxidation its C = C bond lengthens by 0.05 Å, which relieves 1,3-allylic strain. A similar analysis of the origins of the low observed enantioselectivity for the reaction with propanal (64% ee) reveals that while NCIs between its methyl sidechain and diarylprolinol are weakened compared with 8′ or octanal (Supplementary Fig. 11), closed face addition is still disfavored (∆∆E‡Si-E/Re-E = 3.6 kcal mol–1, kSi-E/kRe-E = 631 at 283 K). Selectivity is again predicted to be determined by the E/Z enamine equilibrium (∆GE/Z = 3.1 kcal mol–1, Keq = 246 at 283 K, case 1) and subsequent oxidation.
Collectively, these results show that both strongly favoring the E-enamine geometry and the formation of hydrogen bonds/dispersion interactions between the substrate sidechain and the diarylprolinol substituents are essential to achieve high enantioselectivity. These effects act synergistically, increasing the bias for formation of the E-iminyl radical cation and its subsequent attack by [1.1.1]propellane 1 from the open face of the radical cation.
In conclusion, we have developed an efficient and enantioselective synthesis of α-chiral bicyclo[1.1.1]pentanes, exploiting a multicatalytic system that incorporates photoredox, organo-, and HAT catalysis. The reaction tolerates substrates bearing saturated and unsaturated carbon chains, heterocyclic motifs, aryl and heteroaryl groups, and heteroatoms, and offers a general means to synthesize enantioenriched α-chiral BCPs directly from [1.1.1]propellane. The products obtained can then be easily diversified, allowing the synthesis of valuable chiral BCP building blocks that were previously impossible or difficult to obtain, and highlighting the potential for this protocol to be employed in a wide variety of synthetic applications. We have also developed a kinetic model that rationalizes stereochemical outcomes in this reaction class, where non-covalent interactions play a crucial role in achieving high enantioselectivity.
Methods
Typical procedure for asymmetric addition of aldehydes to [1.1.1]propellane
To a flame-dried vial was added Ir[(ppy)2(dtbbpy)]PF6 (3.7 mg, 4.0 µmol, 0.02 equiv.), 2,4,6-tri-tert-butylbenzenethiol 10 (5.6 mg, 0.02 mmol, 0.1 equiv.), (S)-α,α-bis[3,5-bis(trifluoromethyl)phenyl]-2- pyrrolidinemethanol trimethylsilyl ether 9 (30 mg, 0.050 mmol, 0.25 equiv.), and aldehyde (0.30 mmol, 1.5 equiv., if solid). The vial was sealed with a rubber septum and Et2O, DME, distilled water (7.2 μL, 0.40 mmol, 2.0 equiv.) were then added (taking into account Et2O from the solution of [1.1.1]propellane (tricyclo[1.1.1.01,3]pentane) 1), final reaction concentration = 0.2 M with a 1:1 ratio of Et2O:DME). The vial was then cooled in an ice bath (0 °C) and the solution was degassed by sparging with argon for 15 min. The vent needle was removed and [1.1.1]propellane 1 (1.0 equiv.) and aldehyde (1.5 equiv., if liquid) were then added. The vial was then capped and double-sealed with parafilm. The reaction mixture was then placed in a cooling bath at 10 °C and irradiated with blue LEDs for 24 h. The reaction mixture was then concentrated in vacuo. MeOH (5 mL/mmol of 1) and CH2Cl2 (5 mL/mmol of 1) were added to the vial and the reaction mixture cooled to –78 °C. NaBH4 (5.0 equiv.) was added and the reaction mixture was stirred for 30 min to 1 h at –78 °C. The reaction was quenched by addition of NH4Cl (aq., sat., 5 mL/mmol of 1) and water (5 mL/mmol of 1). The phases were separated, and the aqueous phase was extracted with CH2Cl2 (×3). The combined organic extracts were dried (Na2SO4) and concentrated in vacuo. The residue was purified by flash column chromatography (pentane/ether eluent). The enantiomeric excesses (% ee) were determined by derivatization of the alcohol product as a 4-dimethylaminobenzoate ester, which was analyzed by high-performance liquid chromatography using chiral stationary phases (CHIRALPAK IB or IC column).
Data availability
The authors declare that the data supporting the findings of this study are available within the paper and its Supplementary Information files. All other requests for materials and information should be addressed to the corresponding authors.
References
Stepan, A. F. et al. Application of the Bicyclo[1.1.1]pentane Motif as a Nonclassical Phenyl Ring Bioisostere in the Design of a Potent and Orally Active γ-Secretase Inhibitor. J. Med. Chem. 55, 3414–3424 (2012).
Goh, Y. L., Cui, Y. T., Pendharkar, V. & Adsool, V. A. Toward resolving the resveratrol conundrum: synthesis and in vivo pharmacokinetic evaluation of BCP-resveratrol. ACS Med. Chem. Lett. 8, 516–520 (2017).
Measom, N. D. et al. Investigation of a Bicyclo[1.1.1]pentane as a Phenyl Replacement within an LpPLA2 Inhibitor. ACS Med. Chem. Lett. 8, 43–48 (2017).
Auberson, Y. P. et al. Improving nonspecific binding and solubility: Bicycloalkyl groups and cubanes as para-phenyl bioisosteres. ChemMedChem 12, 590–598 (2017).
Mykhailiuk, P. K. Saturated bioisosteres of benzene: where to go next? Org. Biomol. Chem. 17, 2839–2849 (2019).
Makarov, I. S., Brocklehurst, C. E., Karaghiosoff, K., Koch, G. & Knochel, P. Synthesis of Bicyclo[1.1.1]pentane Bioisosteres of Internal Alkynes and para-Disubstituted Benzenes from [1.1.1]Propellane. Angew. Chem. Int. Ed. 56, 12774–12777 (2017).
Westphal, M. V., Wolfstädter, B. T., Plancher, J.-M., Gatfield, J. & Carreira, E. M. Evaluation of tert-butyl isosteres: Case studies of physicochemical and pharmacokinetic properties, efficacies, and activities. ChemMedChem 10, 461–469 (2015).
Meanwell, N. A. Improving drug design: an update on recent applications of efficiency metrics, strategies for replacing problematic elements, and compounds in nontraditional drug space. Chem. Res. Toxicol. 29, 564–616 (2016).
Locke, G. M., Bernhard, S. S. R. & Senge, M. O. Nonconjugated hydrocarbons as rigid-linear motifs: isosteres for material sciences and bioorganic and medicinal chemistry. Chem. Eur. J. 25, 4590–4647 (2019).
Lovering, F., Bikker, J. & Humblet, C. Escape from flatland: increasing saturation as an approach to improving clinical success. J. Med. Chem. 52, 6752–6756 (2009).
Sterling, A. J., Dürr, A. B., Smith, R. C., Anderson, E. A. & Duarte, F. Rationalizing the diverse reactivity of [1.1.1]propellane through σ–π-delocalization. Chem. Sci. 11, 4895–4903 (2020).
Turkowska, J., Durka, J. & Gryko, D. Strain release – an old tool for new transformations. Chem. Commun. 56, 5718–5734 (2020).
Dilmaç, A. M., Spuling, E., de Meijere, A. & Bräse, S. Propellanes—from a chemical curiosity to “explosive” materials and natural products. Angew. Chem. Int. Ed. 56, 5684–5718 (2017).
Levin, M. D., Kaszynski, P. & Michl, J. Bicyclo[1.1.1]pentanes, [n]Staffanes, [1.1.1]Propellanes, and Tricyclo[2.1.0.02,5]pentanes. Chem. Rev. 100, 169–234 (2000).
Nugent, J. et al. Synthesis of all-carbon disubstituted bicyclo[1.1.1]pentanes by iron-catalyzed kumada cross-coupling. Angew. Chem. Int. Ed. 59, 11866–11870 (2020).
Zhang, X. et al. Copper-mediated synthesis of drug-like bicyclopentanes. Nature 580, 220–226 (2020).
Kondo, M. et al. Silaboration of [1.1.1]propellane: a storable feedstock for bicyclo[1.1.1]pentane derivatives. Angew. Chem. Int. Ed. 59, 1970–1974 (2020).
Yu, S., Jing, C., Noble, A. & Aggarwal, V. K. 1,3-difunctionalizations of [1.1.1]propellane via 1,2-metallate rearrangements of boronate complexes. Angew. Chem. Int. Ed. 59, 3917–3921 (2020).
Kim, J. H., Ruffoni, A., Al-Faiyz, Y. S. S., Sheikh, N. S. & Leonori, D. Divergent strain-release amino-functionalization of [1.1.1]propellane with electrophilic nitrogen-radicals. Angew. Chem. Int. Ed. 59, 8225–8231 (2020).
VanHeyst, M. D. et al. Continuous flow-enabled synthesis of bench-stable bicyclo[1.1.1]pentane trifluoroborate salts and their utilization in metallaphotoredox cross-couplings. Org. Lett. 22, 1648–1654 (2020).
Nugent, J. et al. A general route to bicyclo[1.1.1]pentanes through photoredox catalysis. ACS Catal. 9, 9568–9574 (2019).
Trongsiriwat, N. et al. Reactions of 2-Aryl-1,3-dithianes and [1.1.1]propellane. Angew. Chem. Int. Ed. 58, 13416–13420 (2019).
Caputo, D. F. J. et al. Synthesis and applications of highly functionalized 1-halo-3-substituted bicyclo[1.1.1]pentanes. Chem. Sci. 9, 5295–5300 (2018).
Bär, R. M., Kirschner, S., Nieger, M. & Bräse, S. Alkyl and aryl thiol addition to [1.1.1]propellane: scope and limitations of a fast conjugation reaction. Chem. Eur. J. 24, 1373–1382 (2018).
Lopchuk, J. M. et al. Strain-release heteroatom functionalization: development, scope, and stereospecificity. J. Am. Chem. Soc. 139, 3209–3226 (2017).
Kanazawa, J., Maeda, K. & Uchiyama, M. Radical multicomponent carboamination of [1.1.1]propellane. J. Am. Chem. Soc. 139, 17791–17794 (2017).
Ma, X. & Nhat Pham, L. Selected topics in the syntheses of bicyclo[1.1.1]pentane (BCP) analogues. Asian J. Org. Chem. 9, 8–22 (2020).
Kanazawa, J. & Uchiyama, M. Recent advances in the synthetic chemistry of bicyclo[1.1.1]pentane. Synlett 30, 1–11 (2019).
Pellicciari, R. et al. (S)-(+)-2-(3’-Carboxybicyclo[1.1.1]pentyl)-glycine, a structurally new group I metabotropic glutamate receptor antagonist. J. Med. Chem. 39, 2874–2876 (1996).
Wong, M. L. J., Mousseau, J. J., Mansfield, S. J. & Anderson, E. A. Synthesis of enantioenriched α-chiral bicyclo[1.1.1]pentanes. Org. Lett. 21, 2408–2411 (2019).
Ni, S. et al. A general amino acid synthesis enabled by innate radical cross-coupling. Angew. Chem. Int. Ed. 57, 14560–14565 (2018).
Garlets, Z. J. et al. Enantioselective C–H functionalization of bicyclo[1.1.1]pentanes. Nat. Catal. 3, 351–357 (2020).
Yu, S., Jing, C., Noble, A. & Aggarwal, V. K. Iridium-Catalyzed Enantioselective Synthesis of α-Chiral Bicyclo[1.1.1]pentanes by 1,3-Difunctionalization of [1.1.1]Propellane. Org. Lett. 22, 5650–5655 (2020).
Beeson, T. D., Mastracchio, A., Hong, J.-B., Ashton, K. & Macmillan, D. W. Enantioselective organocatalysis using SOMO activation. Science 316, 582–585 (2007).
Mečiarová, M., Tisovský, P. & Šebesta, R. Enantioselective organocatalysis using SOMO activation. New J. Chem. 40, 4855–4864 (2016).
Capacci, A. G., Malinowski, J. T., McAlpine, N. J., Kuhne, J. & MacMillan, D. W. C. Direct, enantioselective α-alkylation of aldehydes using simple olefins. Nat. Chem. 9, 1073–1077 (2017).
Skubi, K. L., Blum, T. R. & Yoon, T. P. Dual catalysis strategies in photochemical synthesis. Chem. Rev. 116, 10035–10074 (2016).
Zou, Y.-Q., Hörmann, F. M. & Bach, T. Iminium and enamine catalysis in enantioselective photochemical reactions. Chem. Soc. Rev. 47, 278–290 (2018).
Silvi, M. & Melchiorre, P. Enhancing the potential of enantioselective organocatalysis with light. Nature 554, 41–49 (2018).
Yoon, H.-S. et al. N719 dye-sensitized organophotocatalysis: enantioselective tandem michael addition/oxyamination of aldehydes. Org. Lett. 14, 3272–3275 (2012).
Yasu, Y., Koike, T. & Akita, M. Sunlight-driven synthesis of γ-diketones via oxidative coupling of enamines with silyl enol ethers catalyzed by [Ru(bpy)3]2+. Chem. Commun. 48, 5355–5357 (2012).
Arceo, E., Jurberg, I. D., Álvarez-Fernández, A. & Melchiorre, P. Photochemical activity of a key donor–acceptor complex can drive stereoselective catalytic α-alkylation of aldehydes. Nat. Chem. 5, 750–756 (2013).
Bahamonde, A. & Melchiorre, P. Mechanism of the stereoselective α-alkylation of aldehydes driven by the photochemical activity of enamines. J. Am. Chem. Soc. 138, 8019–8030 (2016).
Capaldo, L. & Ravelli, D. Hydrogen atom transfer (HAT): a versatile strategy for substrate activation in photocatalyzed organic synthesis. J. Eur. J. Org. Chem. 2017, 2056–2071 (2017).
Breder, A. & Depken, C. Light-driven single-electron transfer processes as an enabling principle in sulfur and selenium multicatalysis. Angew. Chem. Int. Ed. 58, 17130–17147 (2019).
Lowry, M. S. et al. Single-layer electroluminescent devices and photoinduced hydrogen production from an ionic iridium(III) complex. Chem. Mater. 17, 5712–5719 (2005).
Lind, J., Jonsson, M., Eriksen, T. E., Merenyi, G. & Eberson, L. One-electron reduction potential and ring opening of the succinimidyl radical in water. J. Phys. Chem. 97, 1610–1614 (1993).
Li, Y., Wang, D., Zhang, L. & Luo, S. Redox property of enamines. J. Org. Chem. 84, 12071–12090 (2019).
Larsen, A. G., Holm, A. H., Roberson, M. & Daasbjerg, K. Substituent effects on the oxidation and reduction potentials of phenylthiyl radicals in acetonitrile. J. Am. Chem. Soc. 123, 1723–1729 (2001).
Acknowledgements
M.L.J.W. and A.J.S. thank the EPSRC Centre for Doctoral Training in Synthesis for Biology and Medicine for studentships (EP/L015838/1), generously supported by AstraZeneca, Diamond Light Source, Defence Science and Technology Laboratory, Evotec, GlaxoSmithKline, Janssen, Novartis, Pfizer, Syngenta, Takeda, UCB, and Vertex. E.A.A. thanks the EPSRC for support (EP/S013172/1). A.J.S. and F.D. thank the EPSRC Centre for Doctoral Training for Theory and Modelling in Chemical Sciences (EP/L015722/1) for providing access to the Dirac cluster at Oxford. This work used the Cirrus UK National Tier-2 HPC Service at EPCC (http://www.cirrus.ac.uk) funded by the University of Edinburgh and EPSRC (EP/P020267/1). We thank K. G. Leslie for assistance with the photophysical studies.
Author information
Authors and Affiliations
Contributions
M.L.J.W. and E.A.A. conceived the work. M.L.J.W. designed and carried out the synthetic experiments. A.J.S. and F.D. designed and carried out the theoretical work. A.J.S. and M.L.J.W. designed and carried out the photophysical experiments. M.L.J.W., A.J.S., J.J.M., F.D., and E.A.A. analyzed the data, and discussed and co-wrote the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Wong, M.L.J., Sterling, A.J., Mousseau, J.J. et al. Direct catalytic asymmetric synthesis of α-chiral bicyclo[1.1.1]pentanes. Nat Commun 12, 1644 (2021). https://doi.org/10.1038/s41467-021-21936-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-021-21936-4
This article is cited by
-
Programmable late-stage functionalization of bridge-substituted bicyclo[1.1.1]pentane bis-boronates
Nature Chemistry (2024)
-
Iodopentafluorosulfanylation of [1.1.1]propellane and further functionalizations
Science China Chemistry (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.