About 45 years ago, pioneering studies led by Seymour Benzer identified dunce, the first learning mutant in any animal1, and established Drosophila as an important model to elucidate mechanisms of learning and memory2. Although flies execute a broad repertoire of learned behaviors3,4, associative odor learning remains the most widely studied type of learning in this organism5. In the aversive olfactory-conditioning paradigm, flies are presented with a pair of neutral odors in succession, one in the presence of electric shock and the other without. Subsequently, when flies encounter this odor again later in the absence of shock, the shock-paired odor elicits an avoidance response. A single training trial is sufficient to induce short-term odor-avoidance memory, which can last several hours6. Studies during the past decades identified dozens of protein-coding genes5 and a half-dozen microRNAs7 that are required for normal short-term memory (STM) formation.

Along with advances in Drosophila memory genetics, substantial progress has been made in deciphering the neuronal anatomy and circuits that underlie memory4,8. The mushroom bodies (MB) have been revealed as the higher-order brain center for associative learning9; intrinsic MB neurons called Kenyon cells (KC)10 receive olfactory signals from primary olfactory sensory neurons11,12 via the antennal lobe13,14. As in some vertebrate systems15, neuronal ensembles in the Drosophila MB are thought to represent odor-memory engrams that are continuously modified by the animal’s experience. More recent studies provided a higher functional resolution of MB compartments (lobes) with regards to various types of olfactory memory8. Moreover, clusters of dopaminergic neurons, such as PPL116 and PAM17,18 were found to innervate distinct MB lobes and provide instructive value to the perceived olfactory stimulus.

In our effort to identify additional factors that regulate memory, we were enticed by the “epitranscriptome”, the multitude of modified bases that exist beyond the standard RNA nucleotides. The most abundant and most well-studied internal modification of mRNA is N6-methyladenosine (m6A)19. While m6A has been recognized to exist in mRNA since the 1970s20,21, its functional significance has been elusive until recently. Key advances included (1) techniques to determine individual methylated transcripts, and in particular specific methylated sites, and (2) mechanistic knowledge of factors that install m6A (“writers”) and mediate their regulatory consequences (“readers”). The core m6A methytransferase complex acting on mRNA consists of the Mettl3 catalytic subunit and its heterodimeric partner Mettl14. These associate with other proteins that play broader roles in splicing, mRNA processing and gene regulation, but that are collectively required for normal accumulation of m6A19.

Downstream of the writers, various readers are sensitive to the presence or absence of m6A, and thereby mediate differential regulation by this mRNA modification22. The most well-characterized readers contain YTH domains, for which atomic insights reveal how a tryptophan-lined pocket selectively binds methylated adenosine and discriminates against unmodified adenosine23,24,25,26. In addition, some other proteins were proposed as m6A readers, based primarily on preferential in vitro binding to methylated vs. unmethylated RNA probes. In mammals, m6A readers confer diverse regulatory fates onto modified transcripts, including splicing27 and nuclear export28 via the nuclear reader YTHDC1, and RNA decay via cytoplasmic readers Ythdf1-329,30,31,32. Certain YTHDF33,34,35,36,37 and YTHDC238 were also reported to regulate translation via m6A under specific contexts.

Despite intense efforts into m6A mechanisms and genomics using cell systems, genetic analyses of the m6A pathway have only begun in earnest in the past few years, mostly in vertebrates. Notably, many studies have revealed sensitivity of the mammalian nervous system to manipulation of m6A factors39. Mutants in writer (Mettl3 and Mettl14), reader (primarily ythdf1), and eraser (FTO) factors have collectively been shown to exhibit aberrant neurogenesis and/or differentiation40,41,42,43,44,45. Moreover, these mutants impact neural function and behavior, including during learning and memory paradigms34,46,47,48,49,50. Overall, these observations may reflect some heightened requirements for m6A in neurons, perhaps owing to their unique architectures and/or regulatory needs.

Amongst invertebrates, Caenorhabditis elegans lacks the core m6A machinery51, but the presence of a Drosophila ortholog of Mettl3 (originally referred to as IME4) opened this model system52. While mammals contain multiple members of both nuclear and cytoplasmic YTH domain families, the fly system is simplified in containing only one of each, referred to as Ythdc1 (YT-521B or CG12076) and Ythdf (CG6422), respectively. Recently, the Soller, Roignant and Lai labs established biochemical, genetic, and genomic foundations for studying the m6A pathway in Drosophila53,54,55. Surprisingly, these studies jointly reported that knockout of all core m6A writer factors in Drosophila is compatible with viability and largely normal exterior patterning. Nevertheless, mutants of Mettl3, Mettl14, and Ythdc1 exhibit a common suite of molecular and phenotypic defects. These include several behavioral abnormalities as well as aberrant splicing of the master female sex determination factor Sex lethal (Sxl). The suite of locomotor and postural defects in Drosophila m6A mutants was again consistent with the notion that the nervous system might be especially sensitive.

However, a major open question from these studies concerns the regulatory and biological roles of the sole Drosophila cytoplasmic YTH factor, Ythdf. In contrast to other core m6A factors, we did not previously observe overt defects in our Ythdf mutants, nor did it seem to exhibit robust m6A-specific binding activity55. Here, we use proteomic analyses to reveal Ythdc1 and Ythdf as the major m6A-specific binders in Drosophila, and focused biochemical tests show that Ythdf prefers a distinct sequence context than tested previously. Hypothesizing that the nervous system might exhibit particular needs for the m6A pathway, we utilized a paradigm of aversive olfactory conditioning to reveal an m6A/Ythdf pathway that is important for STM in older animals. We complement these phenotypic data with high-stringency maps of methylated transcript sites from fly heads, and show that m6A does not impact transcript levels but is preferentially deposited on genes with lower translational efficiency. Nevertheless, functional tests reveal that Mettl3/Ythdf can enhance protein output. Finally, we show that physiological Mettl3/Ythdf function is explicitly required within mushroom body neurons to mediate normal conditioned odor memory during aging. Overall, our study provides insights into the in vivo function of this mRNA modification pathway for normal behavior.


Drosophila Ythdc1 and Ythdf bind m6A in A-rich contexts

In mammals, two general classes of m6A-binding proteins (“readers”) are recognized, based on whether they contain or lack a YTH domain22. Although evidence has been shown for preferential association to m6A vs. A for non-YTH proteins, the YTH domain is the only module for which the structural basis of selective m6A binding is known.

The Drosophila genome encodes single orthologs of nuclear (Ythdc1) and cytoplasmic (Ythdf) YTH factors. We previously tested capacities of their isolated YTH domains to associate preferentially with m6A, using RNA probes bearing GGm6ACU vs. GGACU contexts55. This motif represents the favored binding site for mammalian YTHDC1, which has explicitly been shown to prefer G and disfavor A at the −1 position26. Of note, however, mammalian YTHDF1 does not share this discriminatory feature25,56. We previously observed the YTH domain of Drosophila Ythdc1 exhibits robust and selective binding to this methylated probe, but the corresponding domain of Ythdf had only modest activity. From these tests, it was not clear whether the isolated YTH domain might not be fully functional, or perhaps prefers a distinct target site. We tested both of these notions.

We compared the binding of full-length Ythdc1 and Ythdf proteins to m6A vs. A using biotinylated RNA photoaffinity probes57. These probes contain diazirine-modified uridine (5-DzU) that can be cross-linked to protein upon UV irradiation (Fig. 1A). We have shown that 5-DzU does not interfere with protein binding at the modified nucleotide, and therefore enables high-efficiency detection of associated proteins57. We incubated cell lysates expressing tagged YTH proteins with beads conjugated to GGm6ACU/GGACU RNA probes, immunoprecipitated complexes with streptavidin, and performed Western blotting for YTH factors. We observed modestly enhanced association of Ythdc1 to GGm6ACU vs. GGACU, while Ythdf did not crosslink preferentially to this methylated probe (Supplementary Fig. 1).

Fig. 1: Ythdc1 and Ythdf are the major m6A-binding proteins in Drosophila.
figure 1

A RNA photoaffinity probes used in crosslinking assays. B and C Both nuclear (Ythdc1) and cytoplasmic (Ythdf) Drosophila YTH factors specifically recognize m6A within the AAm6ACU context. Point mutations of aromatic residues that line the m6A cage (3A variants) abolish selective binding to m6A probes. FT Flow through. Shown is one representative result from two repeats. D Proteomic profiling of S2 cells using m6A and A RNA photoaffiinity probes reveals Ythdc1 and Ythdf as the only preferentially bound (reader) proteins, and no strongly repelled proteins were found in these conditions. Background proteins are clustered together around the plot origin; threshold = 2X the interquartile range. Two biological replicates were plotted. E Selected values of fly homologs of mammalian m6A readers and repelled proteins expressed in S2 cells, as well as candidates of novel bound/repelled factors. Source data are provided as a Source Data file and Supplementary Dataset 1.

As our previous mapping suggested that Drosophila m6A modifications are biased to have upstream adenosines55, we next compared AAm6ACU/AAACU probes. Interestingly, both Ythdc1 and Ythdf exhibited clearly preferential binding to methylated adenosine in this context (Fig. 1B, C). Next, we tested variants in which three critical tryptophan/leucine residues in the m6A-binding pocket were mutated to alanine (Supplementary Fig. 1). Although “3A” mutant proteins accumulated to similar levels as their wild type counterparts, both Ythdc1-3A and Ythdf-3A failed to bind m6A (Fig. 1B, C), indicating that their specificity for methylated RNA requires intact YTH domains. Thus, Drosophila YTH proteins, in particular Ythdf, may prefer an A-rich context.

Ythdc1 and Ythdf are the dominant Drosophila proteins specifically bound to AAm6ACU probes

Having clarified that both fly YTH factors specifically discriminate between m6A and A, we sought to identify differential binders using an unbiased approach. Proteomic studies in mammalian cells reveal YTH factors as dominant proteins that preferentially associate with m6A compared to unmethylated probes, along with some other proteins (e.g. FMRP and LRPPRC), and reciprocally some factors that are repelled by this modification (e.g. stress granule factors such as G3BP1/2, USP10, CAPRIN1, and RBM42)57,58. As well, other methods were used to identify mammalian factors that appear to bind preferentially to m6A, such as Prrc2a59 and IGF2BP1-360.

We used our AAm6ACU/AAACU RNA photoaffinity probes to pull down endogenous proteins from S2 cell lysates, followed by mass spectrometry. We performed replicate proteomic assays, and plotted the ratios of peptide counts recovered from m6A and A probes (Fig. 1D and Supplementary Dataset 1). These experiments revealed Ythdc1 and Ythdf were strongly and reproducibly enriched with the m6A probe compared to the A probe. By contrast, we did not observe clearly differential association of any other factors, including all fly homologs of other mammalian proteins reported to preferentially bind or be repelled by m6A22 (Fig. 1D, E).

Overall, while conceivable that other target sequences or lysate sources might reveal additional differential binders, we subsequently focused on YTH domain factors as the major direct readers for m6A biology in Drosophila.

Neural autonomous function of m6A supports olfactory learning

The expression of several m6A factors is elevated in the Drosophila nervous system, and mutants of m6A factors are viable, but some exhibit locomotor defects53,54,55. As this suggested preferential sensitivity of the nervous system to m6A, we examined phenotypic requirements of neural m6A in greater detail.

Recent studies reported that the m6A pathway is required for learning and memory in mice34,46. To investigate whether this is also true for flies, we used a classical aversive conditioning paradigm to test Drosophila m6A mutants for deficits in STM. To obtain time-resolved performance measurements, we employed a conditioning apparatus that we named the multi-fly olfactory trainer (MOT, Fig. 2A and Supplementary Fig. 2). Briefly, during olfactory training one odor is administered in the presence of a shock stimulus while the other odor is subsequently delivered in the absence of foot shock (Fig. 2B). Because shock is innately aversive, Drosophila will associate the odor given in the presence of shock with harm and will tend to avoid it during later encounters. During the test phase the flies are presented with both odors and the avoidance of the conditioned odor is quantified as a measure of aversive shock-odor memory.

Fig. 2: m6A pathway is required for short-term learning and memory (STM) in Drosophila.
figure 2

A Schematic of the multifly olfactory training (MOT) chamber apparatus used for behavioral measurements. B Paradigm for shock-associated odor avoidance assay for STM acquisition. C and D Hemizygote null conditions for Mettl3[null] and Mettl3[Δcat] both led to STM impairment. Mettl3[null]/Df (n = 216) vs. Mettl3[null]/+ (n = 132) = −0.23[95CI −0.4, −0.06] p = 0.033. Mettl3[Δcat]/Df (n = 168) vs. Mettl3[Δcat]/+ (n = 144) = −0.35[95CI −0.6, −0.14] p = 0.017. E and F Hemizygote null conditions for Mettl14[fs] and Mettl14[sk1] led to a mild STM impairment. Mettl14[sk1]/Df (n = 120) vs. Mettl14[sk1]/+ (n = 120) = −0.19[95CI −0.52, +0.14] p = 0.345. Mettl14[fs]/Df (n = 168) vs. Mettl14[fs]/+ (n = 168) = −0.15[95CI −0.37, +0.06] p = 0.505. G Pan-neuronal expression of UAS-Mettl3 using elav-Gal4 (elav-G4) in Mettl3[null] hemizygotes rescued their STM phenotype. Mettl3[null]/+ (n = 192) vs. elav-G4/w1118 (n = 168) = +0.02[95CI −0.17, +0.21] p = 0.647. Mettl3[null]/Mettl3[Δcat] (n = 180) vs. elav-G4/w[1118] (n = 168) = −0.33[95CI −0.57, −0.07] p = 0.085. Mettl3[null]/Mettl3[Δcat] + elav-G4 UAS-Mettl3 (n = 180) vs. elav-G4/w[1118] (n = 168) = +0.08[95CI −0.1, +0.22] p = 0.132. All assays in CF were conducted in 20-day-old flies. Bars present mean values. Each dot in the scatter plots represents a PI average of 12 flies. All control–test differences are displayed as effect sizes with error curves and 95% confidence intervals. No null-hypothesis significance testing was performed; two-tailed Mann–Whitney P values are shown for legacy purposes only. For multiple comparisons, several test groups were compared against a common control group. PI = performance index. Source data are provided as a Source Data file.

We used the respective heterozygotes as controls in following tests. To minimize background genetic effects, a frequent confound of behavioral assays, we compared these to trans-heterozygous or hemizygous (over deficiency) allelic combinations. In young flies, both writer mutants were essentially normal: we observed only a modest STM reduction in 10-day-old Mettl3 hemizygous nulls, while similarly aged Mettl14 mutants showed no impairment (Supplementary Fig. 3). However, at 20 days, both Mettl3[null] and Mettl3[∆cat] hemizygous nulls displayed a substantially stronger (ΔPI −0.2 to −0.3) STM impairment (Fig. 2C, D). Consistent with the role of Mettl14 as a cofactor for Mettl3, hemizygote Mettl14[fs], and Mettl14[SK1] mutants also exhibited comparable STM impairments in 20-day-old flies (Fig. 2E, F).

Assays of whole animal mutants did not resolve if the nervous system per se was involved in these behavioral defects. We addressed this using tissue-specific knockdown and rescue experiments. We first generated Mettl3[null] hemizygote animals bearing elav-Gal4 and UAS-Mettl3 transgenes, to drive their expression in all neurons. In this genetic background, all non-neuronal cells of the intact animal lack Mettl3. Strikingly, these flies exhibited normal STM (Fig. 2G), providing stringent evidence that the odor avoidance behavioral defect of m6A knockouts is strictly due to a cell-autonomous function of Mettl3 in neurons.

Ythdf, but not Ythdc1, is the functional effector of m6A during STM

We sought to elaborate the regulatory pathway underlying m6A in learning and memory. Prior genetic assays linked m6A writers Mettl3/Mettl14 in a pathway with nuclear reader Ythdc1 for locomotor and gravitaxis behaviors, as well as ovary development53,54,55. By contrast, our Ythdf mutants did not resemble other core m6A mutants, and overall seemed to lack substantial defects in these assays55.

The phenotypic discrepancy of these mutants was further emphasized by quantifying their lifespans. While mutations in Mettl3 and Ythdc1 led to severely shortened lifespan (>40 days), loss of Ythdf had only minor effects on lifespan (Fig. 3A–C and Supplementary Fig. 4a–c). As some behavioral effects of the m6A pathway are mediated by the nervous system54, we tested the effect of neuronal loss of Mettl3. After validating that a UAS-Mettl3-RNAi transgene was able to deplete both Mettl3 RNA and protein (Supplementary Fig. 5a, b), we tested the consequences of pan-neuronal depletion using elav-Gal4. Compared to controls, loss of neural Mettl3 caused modestly shorter (10 days) lifespan (Supplementary Fig. 4d). These data support the concept of a physiologically important role for nuclear readout of m6A via Ythdc1, with overt, nervous-system effects on longevity.

Fig. 3: Ythdf, but not Ythdc1, mediates the role of m6A in Drosophila STM.
figure 3

AC Lifespan measurements of m6A writer and reader mutants. Mutants of Mettl3 (A) and nuclear reader Ythdc1 (B) exhibit severely shortened lifespan, but mutants of cytoplasmic reader Ythdf (C) shows only a minor lifespan reduction. Mettl3[null]/Df (n = 72) vs. w[1118] (n = 106) = −34.2[95CI −42.1, −26.31] p < 1*10−4. Mettl3[null]/Mettl3[Δcat] (n = 88) vs. w[1118] (n = 106) = −43.3[95CI −50.66, −35.82] p < 1*10−4. Ythdc[ΔN]/Df (n = 91) vs. w[1118] (n = 106) = −50.5[95CI −57.53, −42.81] p < 1*10−4. Ythdf[NP3]/+ (n = 113) vs. w[1118] (n = 133) = −1.2[95CI −6.57, +4.24] p = 0.431. Ythdf[NP3]/Df (n = 133) vs. w[1118] (n = 133) = −14.7[95CI −19.37, −9.96] p < 1*10−4. DG STM measurements in 20-day flies. D Despite gross behavioral defects and short lifespan, Ythdc1 mutants exhibit normal STM. Ythdc[ΔN]/Df (n = 180) vs. Ythdc1[ΔN]/+ (n = 180) = +0.04[95CI −0.18, +0.25] p = 0.709. E Pan-neuronal knockdown of Ythdc1 using elav-Gal4 (elav-G4) also yields normal STM. Ythdc1[RNAi]/+ (n = 216) vs. elav-G4/+ (n = 168) = −0.03[95CI −0.25, +0.14] p = 0.717. Elav-G4/Ythdc1[RNAi] (n = 216) vs. elav-G4/+ (n = 168) = −0.09[95CI −0.26, +0.08] p = 0.568. F Ythdf hemizygotes recapitulate age-induced STM impairment seen in m6A writer mutants. Ythdf[NP3]/Df (n = 168) vs. Ythdf[NP3]/+ (n = 168) = −0.27[95CI −0.49, −0.04] p = 0.023. G Pan-neuronal knockdown of Ythdf compromised STM similar to the impairment observed in whole animal Ythdf mutants. Ythdf[RNAi]/+ (n = 144) vs. elav-G4/+ (n = 144) = +0.06[95CI −0.14, +0.28] p = 0.707. Elav-G4/Ythdf[RNAi] (n = 144) vs. elav-G4/+ (n = 144) = −0.21[95CI −0.4, +0.02] p = 0.053. STM assays in DG were conducted in 20-day-old flies. Bars  in D-G represent mean values. All control–test differences are displayed as effect sizes with error curves and 95% confidence intervals, two-tailed Mann–Whitney P values are shown for legacy purposes only. Source data are provided as a Source Data file.

In light of extensive locomotor defects and short lifespan of Ythdc1 mutants, we were surprised to find that Ythdc1 nulls had normal STM performance at 10 and 20 days of age (Supplementary Fig. 3D and Fig. 3D). We also depleted Ythdc1 using RNAi (Supplementary Fig. 5a), but pan-neuronal knockdown of Ythdc1 using elav-Gal4 in aged flies also did not affect STM (Fig. 3E). Thus, we were prompted to examine mutants of the cytoplasmic reader YTHDF more carefully. Excitingly, Ythdf hemizygotes exhibited age-related STM impairment (Fig. 3F), comparable to Mettl3 mutants. Since Ythdc1 mutants generally phenocopy other defects of m6A writer mutants, these data indicate a division of labor between the Drosophila YTH readers, downstream of m6A writers.

To test whether Ythdf was specifically required in the nervous system, we used a validated RNAi transgene (Supplementary Fig. 5a). 20-day-old elav-Gal4 > UAS-Ythdf[RNAi] flies also exhibited impaired STM (Fig. 3G). Altogether, these data indicate that cytoplasmic readout of m6A by Ythdf is required for normal function of memory-storing neurons in older flies.

Normal locomotor response and olfactory acuity in Mettl3 and Ythdf mutants

Since STM performance depends on locomotion and olfaction, we asked if the defects in Mettl3 and Ythdf mutants were specific to memory-related behavior. We note that a previous study reported adult walking defects in m6A mutants54; however, this was measured using a different assay in which the fly wings are removed and animals are provided visual landmarks to promote directional movements (Buridan’s paradigm). We examined the locomotor response of w[1118] and m6A mutants before, during, and after a shock stimulus in the MOT. Both Mettl3 and Ythdf locomotor responses to shock were very similar to controls (Supplementary Fig. 6a), indicating that m6A mutants do not exhibit shock sensitivity or locomotion defects in the MOT setup that might affect the memory measurements.

Second, we tested the olfactory acuity of aged m6A mutants. Given a choice between the MCH odor and clean air (in the absence of conditioning), w[1118], Mettl3, and Ythdf avoidance scores were all comparable (Supplementary Fig. 6b, c). This was true for both the same MCH concentration used in conditioning experiments, and a four-fold higher concentration. Thus, the olfactory acuity of m6A mutants appears normal.

Neither Mettl3 nor Ythdf can cross-rescue each other’s memory defects

We next asked whether overexpression of Ythdf in Mettl3 mutants, or the reciprocal genetic manipulation, would affect STM. Successful rescue could, for example, suggest that the reading function of Ythdf is not fully dependent on Mettl3 methylation, i.e. may somehow involve a parallel pathway. However, Mettl3 nulls supplemented with pan-neuronal Ythdf overexpression did not show STM improvement (Supplementary Fig. 7a). Similarly, overexpression of Mettl3 did not improve the STM impairment in Ythdf mutants (Supplementary Fig. 7b). Beyond serving as stringent negative controls for the cognate rescue experiments (Figs. 2 and 3), these results provide further credence to the notion that a linear, directional Mettl3/14 → Ythdf pathway underlies m6A-mediated function for STM.

Mapping the Mettl3-dependent m6A methylome in Drosophila

To link these brain-function defects to the underlying molecular landscape of RNA methylation, we sequenced m6A sites from polyadenylated transcripts using miCLIP61. Although we previously reported miCLIP datasets from Drosophila embryos55, we recognized that there can be background association in such data. Thus, individual sequencing “peaks” need to be interpreted cautiously. To provide a stringent basis to infer the existence of m6A at given sites, we analyzed companion input and miCLIP libraries from dissected heads, which are highly enriched for neurons, comparing wild-type and deletion mutants of Mettl3, which encodes the catalytic methyltransferase subunit essential for mRNA modification (e.g. Fig. 1 and Supplementary Dataset 2).

The miCLIP libraries from Mettl3 mutants proved especially valuable, because they allowed us to distinguish m6A-IP loci that were clearly genetically dependent on endogenous Mettl3 (Fig. 4A, Supplementary Fig. 8a). Reciprocally, numerous regions of the transcriptome were significantly enriched in miCLIP libraries compared to input, but whose signals persisted in Mettl3 mutants (Fig. 4B, Supplementary Fig. 8b). These might conceivably represent transcript regions modified by another factor62, but cannot at this point be easily distinguished from non-specific pulldown. In general, the Mettl3-independent peaks were globally present in weaker m6A peaks (Fig. 4C), suggesting they are functionally less relevant. Therefore, we applied stringent filtering to focus our attention on the rich set of clearly Mettl3-dependent peaks (Fig. 4A–C). In addition, as we employed strong selection for polyadenylated transcripts for input, we prioritized studies of annotated genes. Altogether, our analyses (see the “Methods” section) yielded 3874 Mettl3-dependent peaks from 1635 genes. Since a subset of these called regions contained clear local minima, we applied PeakSplitter63 to arrive at 4686 head m6A peaks (Supplementary Dataset 3).

Fig. 4: High stringency mapping of the Drosophila m6A methylome reveals new features.
figure 4

A IGV screenshots of genes that exemplify archetypal 5′ UTR miCLIP enrichment and the utility of wild type vs. Mettl3 mutant comparisons. The IGV tracks above the transcript model depict miCLIP and input libraries from wild type and Mettl3 female heads. Note the 5′ UTRs of all three genes (Atpalpha, nrv3, and fne) contain prominent Mettl3-dependent peaks (blue box). Other exonic regions sequenced in miCLIP libraries are not enriched above input libaries (e.g. gray box). B IGV screenshot of Non2 illustrates a 5′UTR Mettl3-independent peak (red box). C Heatmaps of Mettl3-dependent and -independent m6A peaks. Heatmaps of input normalized miCLIP signals at Mettl3-dependent and independent peaks. Each line represents miCLIP enrichment over input across a MACS2-called peak, as well as 500 nt flanking regions. Heatmaps on the left are all peaks including Mettl3-dependent and independent m6A peaks. Mettl3-independent m6A peaks are displayed in the right panels. Note that the scales are different for the heatmap panels. Approximate locations of Mettl3-independent m6A peaks within all peaks are indicated by a dashed box. D Metagene profiles of miCLIP and input signals along a normalized transcript using genes that contain high-confidence m6A peaks in head libraries. An overwhelming 5′ UTR enrichment is observed. E Metagenes of enrichment at high-confidence m6A peaks that have been group as 5′ UTR/start codon and 3′ UTR/CDS regions. Metagenes are produced by averaging signals from input normalized miCLIP from WT head. On average, stronger signals are observed at 5′ UTRs/start codons. Peak start and end are specified on the x-axis. Dashed lines include the start and end locations of peaks. F Pie chart depicting the fraction of m6A peaks in different transcript segments. G Nucleotide content surrounding CIMs located within the top 1000 Mettl3-dependent m6A peaks in head. Source data are provided as a Source Data file and Supplementary Dataset 3.

Drosophila m6A is highly enriched in 5′ UTRs within adenosine-rich contexts

Characterization of Drosophila Mettl3-dependent m6A peaks revealed fundamental similarities and differences with m6A patterns in other organisms. Mammalian (e.g. human and mouse) m6A is well-known to dominate at stop codons and 3′ UTRs19,64. In fish, m6A is also highly enriched at stop codons, but the predominant Mettl3-dependent signals localize to 5′ UTRs65. Previous work in Drosophila was conflicting, since low-resolution meRIP-seq suggested mostly CDS modification with a small minority in UTRs54, while our prior miCLIP data indicate dominant UTR modifications, preferentially in 5′ UTRs55. However, these maps were generated with different technologies, and neither was controlled against mutants.

Our miCLIP data provide a clearer perspective. Strikingly, while found at some level throughout the transcriptome, m6A predominates in 5′ UTRs in Drosophila. This can be observed at numerous individual loci (Fig. 4A and Supplementary Fig. 8) and via miCLIP metagene profiles (Fig. 4D). Overall, while we do observe some Mettl3-dependent coding sequence (CDS) and 3′ UTR miCLIP peaks (Fig. 4E, and Supplementary Fig. 8), these were overall rare, of generally lower ranks than 5′ UTR and start codon peaks (Fig. 4F), and not appreciably enriched in metagene profiles over companion mutant datasets (Fig. 4D).

We examined C-to-T crosslinking-induced mutations following adenosine residues (CIMs), which have been taken to represent individual m6A site in miCLIP data61,66. In particular, we focused on CIMs located within Mettl3-dependent m6A-IP peaks, which we took as bearing high-confidence RNA methylation sites (Supplementary Dataset 4). Within these, the sequence context of CIMs in Drosophila roughly resembles the DRAC context that has been observed in other species19. However, while a majority of sites fall into a GGACH context in vertebrates19, m6A sites in Drosophila prefer AAACD (Fig. 4G), correlating with the preferred binding sites of Ythdc1 and Ythdf in our assays of photocrosslinking-activated m6A probes (Fig. 1).

We validated our map by testing m6A-IP to IgG-IP samples for enrichment of m6A target transcripts using rt-qPCR (Supplementary Fig. 9). We validated a number of top m6A targets (e.g. aqz, Syx1A, fl(2)d, prosap, pum, futsch, gish) from whole female fly RNA (Fig. 5A). Still, recognizing that m6A-RIP-qPCR evaluates the presence of entire transcripts in pulldowns, we performed parallel experiments from Mettl3[null] female flies. All of these binding events, even loci with very modest enrichment in wild type (e.g. sky, Fig. 5A), were found to be Mettl3-dependent. By contrast, control loci lacking m6A peaks (fwe and CG7970) showed very little m6A-dependent IP signals, and these were unaltered in Mettl3[null] samples (Fig. 5A′). These data provide stringent validation of our m6A maps.

Fig. 5: Validation of Drosophila m6A targets and their association with readers.
figure 5

AA′ m6A-RIP-qPCR validation of m6A transcripts in w[1118] control and Mettl3[null] knockout whole female flies. Error bars, mean ± SD; n = 3 biological replicates. Two-tailed t-test, *p < 0.05, **p < 0.01. syx1A p = 0.012, aqz p = 0.005, fl(2)d p = 0.004, pum p = 0.009, prosap p = 0.016, futsch p = 0.009, gish p = 0.044, sky p = 0.010. n.s. non-significant, fwe p = 0.604, CG7970 p = 0.085. B and C RIP-qPCR of m6A targets in S2-S cells and transfected Ythdc1 (B) or Ythdf (C) constructs shows specific pulldown of several targets relative to GFP-RIP control, and the association of several of these is compromised by mutation of the YTH domain (3A versions). Shown is one representative result from three independent repeats. Source data are provided as a Source Data file.

Overall, our high-quality miCLIP data from the Drosophila head reveals that the position of m6A in this species appears distinct amongst metazoans (highly 5′ UTR specific) and occurs within a distinct adenosine-rich context.

Drosophila YTH factors associate with m6A targets in a YTH-dependent manner

We next assessed association of m6A targets with YTH factors using transfected constructs in S2-S cells, a derivative of S2 cells lacking viruses67. Although overexpression may affect the localization properties of YTH domain proteins31, we showed that ectopic Ythdc1 and Ythdf localize to the nucleus and cytoplasm of cultured cells, respectively55. In these tests, it is also relevant to consider that we are evaluating the association of the test proteins and target RNAs, which may or may not occur directly through the modified nucleotides. However, we can compare these to YTH-“3A” point-mutant counterparts that disrupt m6A selectivity (Fig. 1).

We immunoprecipitated tagged YTH wild-type or “3A” mutant factors and performed qPCR for validated m6A targets or negative control transcripts. By comparison to control GFP-IP, we observed preferential binding of Ythdc1/Ythdf on multiple m6A targets, compared to non-m6A transcripts (Fig. 5B, C). By testing companion “3A” mutant factors, we gained evidence for direct association of YTH factors on m6A targets. However, a clear picture of target selectivity did not emerge (Fig. 5B, C). Syx1A and aqz exhibited the most clearly differential association between wt and 3A forms of both Ythdc1 and Ythdf. We observed potentially selective association with other loci, in that gish was preferentially bound only by wt Ythdc1 while fl(2)d was preferentially bound only by wt Ythdf.

We bear in mind these were ectopic experiments, and thus cannot rule out non-physiological associations. Even though we observed many cases of YTH-dependent target association, both YTH-3A proteins still exhibited apparent enrichment compared to GFP. If these mutant YTH proteins are still capable of incorporating into RNA granules, this may conceivably indicate indirect interactions with transcripts. Nevertheless, these data provide evidence that YTH domain proteins, including Ythdf, associate with specific m6A target transcripts via their m6A-binding pocket in Drosophila cells.

m6A does not globally influence mRNA levels in Drosophila

There is diverse literature on linking mammalian YTHDF homologs to RNA decay and/or translational activation, while the function of Drosophila m6A/Ythdf has been little studied. The only prior study integrated MeRIP-seq peaks from S2R+ cells with RNA-seq data from m6A pathway depletions, and concluded that m6A correlated with slightly elevated levels of target mRNAs at steady state54. With our high-stringency m6A map from heads, we generated RNA-seq data from one- and three-week old heads using Mettl3, Ythdf heterozygotes, and transheterozygotes. The heterozygote samples provide matched genetic backgrounds for comparison, and the temporal series assesses CNS stages including an advanced setting during which behavioral phenotypes were apparent (Figs. 2 and 3).

Transcriptome analyses revealed scores of differentially expressed genes in one- and three-week old mutants (Supplementary Dataset 5), a majority of which were uniquely misexpressed (Supplementary Fig. 10a, b). Most affected genes were not found to be common between m6A writer (Mettl3) and reader (Ythdf) mutants, although there were mild changes that gradually increased with tissue age (Supplementary Fig. 10c and d). Thus, there did not appear to be a clear signature of m6A/Ythdf regulation revealed by bulk gene expression.

We examined this more closely by directly examining the behavior of m6A targets. We reasoned that targets with systematically higher levels of methylation—that is, genes with increasing proportions of methylated transcripts—would be more sensitive to loss of the m6A pathway. However, while our miCLIP libraries provide Mettl3-dependent peaks and single nucleotide resolution mapping of m6A sites in the transcriptome, it is not possible to infer overall methylation levels. A solution to this limitation, grouping targets by number of sites/peaks, has been adopted by others31,68 and proposes that targets with increasing numbers of peaks/sites may have more individual transcripts with at least one m6A modification. Therefore, we binned genes by numbers of Mettl3-dependent m6A peaks.

In contrast to prior association of Drosophila m6A with increased steady-state levels of targets54, we did not observe many changes in our high-confidence m6A targets in Mettl3 (Fig. 6A) or Ythdf mutant CNS from any stage (Supplementary Fig. 10e–h). Paradoxically, even though all bins of m6A targets clustered closely with a log2 fold change of 0, Kolmogorov–Smirnov (KS) tests indicated statistical significance when comparing sets of m6A targets and background. While statistically different, our analyses failed to detect any directional gene expression changes in methylated transcripts under writer or reader loss (Fig. 6A and Supplementary Fig. 10).

Fig. 6: m6A mediates translational activation in Drosophila.
figure 6

A Steady-state RNA levels of m6A targets are not affected by loss of m6A. Differential gene expression analysis of 1-week-old Mettl3 heterozygote and mutant heads. No directional change was observed in any group of m6A targets, binned by increasing numbers of Mettl3-dependent m6A peaks. B m6A targets are not biased in their mRNA stability. The half-life of neural genes obtained from TU-decay measurements69 is plotted as cumulative distribution grouping target genes as in (A), based on number of peaks per target. C CRISPR/Cas9 mutagenesis of Mettl3 in S2-S cells. D Western blotting shows lines #3–5 and #4–3 lack Mettl3 protein; #3–3 was used as a control line. E Quantitative liquid chromatography–mass spectrometry (LC–MS) and absolute quantification confirms specific lack of m6A in Mettl3-KO cells. Error bars, mean ± SD; n = 3 biological replicates, two-tailed t-test, ***p < 0.001. m6A p = 5.87E−06. n.s. = non-significant, m5C p = 0.604, m5U p = 0.612. F qPCR of m6A-modified mRNAs shows they have similar half-lives in Mettl3-KO and wild-type cells. Error bars, mean ± SD; n = 3 biological replicates, two-tailed t-test, ns, not significant. G Translation efficiency (TE) measurements70 plotted as cumulative fractions for targets with different numbers of m6A peaks. m6A is preferentially deposited on genes with low TE. For panels A, B, and G, a bootstrap method generated the background distribution (None) using genes that lacked m6A peaks. To generate p-values, two-sided Kolmogorov–Smirnov (KS) tests were performed comparing the background distribution and each group of m6A target genes. Number of targets are included in parentheses. H Puromycin labeling (5′ in 5 µg/mL media, 50′ recovery) shows reduced global protein synthesis in Mettl3-KO cells. I Quantification of nascent protein synthesis in independent Mettl3-KO S2-S cells. Error bars, mean ± SD; n = 4 biological replicates, Two-tailed t-test, **p < 0.01. #3–5 p = 0.00441, #4–3 p = 0.00496. J aqz, a model m6A target. We assayed a wildtype aqz 5′ UTR reporter and a variant with two point mutations of m6A sites within the strongest Mettl3-dependent peak (aqz-M). K aqz-wt-Luc generates more reporter output than aqz-M-Luc in wildtype cells, but these have equivalent output in Mettl3-KO cells. Error bars, mean ± SD; n = 3 replicates (luciferase), n = 5 replicates (qPCR). Two-tailed t-test, **p < 0.01, ***p < 0.001. p = 0.0006, p = 0.0089. n.s. non-significant, F-Luc/R-Luc p = 0.278, mRNA F-Luc/R-Luc p = 0.326. This is one representative result from three independent repeats. LO Wing imaginal disks expressing tub-GFP (in green), ptc-Gal4 > UAS-HA-Ythdf wild type or 3A mutants or UAS-DsRed (HA/DsRed in red) and DAPI (blue). L Ectopic Ythdf has only marginal effects on the parental tub-GFP reporter. M DsRed does not affect the tub-aqz-5’UTR-GFP reporter. NO Wildtype Ythdf (N) but not Ythdf-3A (O) enhances GFP production from tub-aqz-5’UTR-GFP. Numbers of disks analyzed are labeled, and representative results are shown. Scale bar is 100 µM. Source data are provided as a Source Data file.

Since it was conceivable that some expression trends were masked in steady-state measurements, we examined a published dataset of in vivo mRNA decay rates generated using dynamic TU-tagging from the Drosophila CNS, obtained by pulse-chase labeling of pros-Gal4 > UAS-UPRT cells with 4-thiouridine69. We observed that, in aggregate, m6A-modified transcripts had identical mRNA half-lives as the background distribution (Fig. 6B). Thus, we were not able to discern global m6A regulatory impacts on transcript properties.

To test this further, we used CRISPR/Cas9 to delete the Mettl3 locus from S2-S cells. Western blotting validated absence of Mettl3 protein in multiple independent cell lines (Supplementary Fig. 11), including two lines that we used for further analysis (#3-5 and #4-3, Fig. 6C, D). Because #4–3 retained genomic material internal to the confirmed deletion, despite absence of Mettl3 protein (Supplementary Fig. 11), we generally relied on line #3-5 (Mettl3-KO). Moreover, we directly measured N6-m6A levels in Mettl3-KO cells using quantitative liquid chromatography–mass spectrometry (LC–MS). External calibration curves prepared with A and m6A standards determined the absolute quantities of each ribonucleoside. The mRNA m6A methylation levels in knockout cells were <5% of those in wild-type cells, whereas other modified ribonucleosides were unaffected (Fig. 6E).

Using Mettl3-KO cells, we performed RNA decay assays of validated m6A targets and control transcripts. Following inhibition of transcription using actinomycin D, we observed a range of transcript levels across different loci, but none of these were significantly different between wild-type and m6A-deficient cells (Fig. 6F). Overall, our analyses using S2 cells and intact nervous system indicate that mRNA stability of m6A-containing transcripts is neither substantially nor directionally influenced by loss of m6A in Drosophila, in contrast to m6A in mammals.

m6A is preferentially deposited on fly transcripts with lower translational efficiency

In light of these data, we examined the alternate possibility of m6A-dependent translational control. For this purpose, we utilized ribosome-profiling datasets from Drosophila heads70 to assess translational efficiencies of transcripts with or without m6A modifications. Strikingly, we found that genes with m6A had lower translational efficiency than the background distribution (Fig. 6G). The functional relevance of this observation was strengthened by the fact that the number of m6A peaks per transcript exhibited a progressive, inverse correlation with translational efficiency and contrasted with the lack of correlation of m6A modification with either steady-state transcript levels or RNA stability. Altogether, these results suggest that m6A mediates translational control. Moreover, as our miCLIP maps were generated from highly dT-selected RNAs, we infer that this may reflect modifications that are mostly present in cytoplasmic transcripts available for binding to Ythdf.

Drosophila m6A enhances target protein output

The dominant location of Drosophila m6A in 5′ UTRs, contrasting with the preferred residence of mammalian m6A in 3′ UTRs, is suggestive of a role in influencing translation. However, the above genomic analyses are correlational in nature, and do not directly connect m6A to gene regulation. One scenario is that m6A, being enriched amongst poorly translated mRNAs, is a suppressive mark. However, an alternative logic is that m6A is a positive mark that is preferentially deposited on transcripts that are inefficiently translated, which might make the potential impact of enhancement more overt. Such logic was proposed for mammalian YTHDC2 to enhance translation of low efficiency translated m6A targets38.

We first evaluated if m6A might exert global impact on translation. We exploited our Mettl3-KO S2-S cells and monitored newly synthesized proteins using puromycin incorporation71. Interestingly, we observe a difference between steady-state protein accumulation and nascent protein synthesis in wild-type and m6A-mutant cells. In particular, when analyzing similar amounts of total cellular protein, we observed that both Mettl3-KO cells (#3-5 and #4-3) consistently generated less newly synthesized bulk proteins than did control S2-S cells (Fig. 6H, I). Western blotting for tubulin, a non-m6A target, verified similar steady-state accumulation between wild-type and knockout cells, while Mettl3 blotting confirmed knockout cell status. These data suggested that m6A may enhance protein output.

We tested this further using a reporter assay. One of the most prominent m6A targets was aaquetzalli (aqz), whose 5′ UTR bore highly Mettl3-dependent miCLIP peaks with multiple CIMS (Fig. 6J), and whose modification we had validated (Fig. 5). Aqz is required for cell polarity and neural development72. We cloned its 5′ UTR upstream of firefly luciferase (aqz-wt-Luc), as well as a companion mutant version in which we mutated both identified m6A sites within the strongest miCLIP peak (aqz-M-Luc). We co-transfected these reporters with renilla control reporter into S2-S cells, and observed that the wildtype aqz reporter reliably yielded higher output (Fig. 6K). However, when we repeated these tests in Mettl3-KO cells, the wildtype and mutant aqz reporters were indistinguishable (Fig. 6K). Finally, we tested the transcript levels of the reporters by qPCR. While these measurements were more variable than the luciferase activity readouts, they were not significantly different between wt and mutant aqz reporters (Fig. 6K). These tests provide evidence that individual 5′ UTR m6A sites can confer activation in fly cells, and are consistent with translational regulation.

Drosophila Ythdf enhances output of an m6A reporter in a YTH-dependent manner

To test if Ythdf might be an effector of m6A-mediated target activation, we implemented a transgenic assay. We used a reporter backbone consisting of GFP under control of the tubulin promoter (tub-GFP), a transgene that is broadly and relatively evenly expressed in the animal73. In this genetic background, we can coexpress factors in a spatially defined subpattern, to assess regulatory impact on the transgene. When we stain wing imaginal disks bearing a naive reporter, and expressing UAS-HA-Ythdf along the anterior–posterior boundary (using ptc-Gal4), we do not observe substantially different GFP protein accumulation in cells co-expressing Ythdf, compared to non-Gal4 cells as internal control territories (Fig. 6L).

Since we had validated aqz as both an m6A target (Fig. 6K) and a Ythdf target (Fig. 5), we transferred its 5′ UTR into the tub-GFP reporter. The tub-aqz-5UTR-GFP transgene expressed GFP broadly and the levels were not noticeably different from the parent transgene. Its accumulation was not affected by co-expression of a UAS-DsRed transgene (Fig. 6M). However, when we introduced into the ptc > HA-Ythdf background, GFP was elevated specifically within the Ythdf-expressing domain (Fig. 6N). This was consistent with a role for Ythdf in enhancement of this m6A target.

To test if this was due to specific activity of Ythdf, we generated an HA-tagged transgene containing the three YTH pocket mutations, which we showed abrogates association to m6A in vitro (Fig. 1C) and to validate m6A-bearing transcripts in cells (Fig. 5C). HA-Ythdf-3A protein accumulated to a similar level as wild type, and was also similarly neutral as its wild-type counterpart when tested on the parent tub-GFP reporter. Moreover, mutant Ythdf-3A was unable to enhance GFP protein output from the tub-aqz-5UTR-GFP transgenic reporter (Fig. 6O). These data support the notion that Ythdf recognizes m6A-bearing 5′UTR targets for translational enhancement.

An autonomous, m6A-dependent, neural function for Ythdf in memory

The availability of wild-type and mutant Ythdf transgenes allowed us to conduct further genetic tests of the connection between m6A readout and STM. Overexpression of either Ythdf transgene, (e.g. with ptc-Gal4, ap-Gal4) did not substantially impair viability or developmental patterning; and pan-neuronal expression of Ythdf using elav-Gal4 did not affect lifespan (Supplementary Fig. 4). Therefore, even though we could detect a selective m6A-dependent impact of Ythdf on reporter transgenes, elevated Ythdf expression does not interfere with normal developmental programs, or has effects that are otherwise within the range of developmental compensation. This mirrors the lack of substantial consequences of removing Ythdf.

We moved to perform cell-type-specific transgenic rescue assays. Building on our observation that neural-knockdown of Ythdf phenocopied the STM defects seen in whole-animal mutations (Fig. 3G), we introduced elav-Gal4 and UAS-Ythdf-wt or UAS-Ythdf-3A transgenes into Ythdf hemizygous null backgrounds. The Ythdf mutants carrying elav-Gal4 had defective STM, indicating the Gal4 transgene does not improve this behavioral output (Fig. 7A). This was important to rule out, since at least some other Drosophila neuronal phenotypes are modified by Gal4 alone74,75. With this control background as reference, we found that the STM deficit of Ythdf nulls could be rescued by pan-neuronal restoration of Ythdf, thereby restoring normal STM (Fig. 7A). In contrast, elav > Ythdf-3A transgenes did not rescue normal STM capacity to Ythdf mutants (Fig. 7A). Thus, m6A binding is critical for neural Ythdf function during STM formation.

Fig. 7: An m6A/Ythdf pathway acts in the mushroom body to mediate STM.
figure 7

AC In vivo function of Ythdf during learning and memory requires m6A-binding capacity. A Pan-neuronal expression (using elav-Gal4, =G4) of wild-type Ythdf, but not Ythdf-3A, rescued STM defects in Ythdf hemizygote mutants at 20 days. Elav-G4; Ythdf[NP3]/Df vs. elav-G4/+ = −0.42[95CI −0.53, −0.31] p < 1*10−4. Elav-G4; UAS-Df1; Ythdf[NP3]/Df vs. elav-G4/+ = 0[95CI −0.13, +0.14] p = 0.684. Elav-G4; UAS-Df1-3A; Ythdf[NP3]/Df vs elav-G4/+ = −0.27[95CI −0.41, −0.17] p < 1*10−4. B Mushroom body (MB) expression (using MB247-Gal4) of Ythdf, but not Ythdf-3A, impairs STM in 20-day flies. MB247-G4; UAS-Ythdf −0.24[95CI −0.37, −0.12] p = 0.001. MB247-G4/+ vs. MB247-G4; UAS-Ythdf-3A (vs. MB247-G4/+ = +0.04[95CI −0.05, +0.15] p = 0.415. C Expression of Ythdf-wt/3A proteins does not affect locomotion behavior. D Depletion of Mettl3 in the MB phenocopied STM impairment seen in whole animal Mettl3 mutants (see Fig. 2). Mettl3[RNAi]/+ vs. MB247-G4/+ = +0.01[95CI −0.26, +0.27] p = 0.654. MB247-G4; UAS-Mettl3[RNAi] vs. MB247-G4/+ = −0.21[95CI −0.38, −0.02] p = 0.034. E MB-specific knockdown of Ythdf compromised STM, similar to what has been observed in whole animal Ythdf mutants (see Fig. 3). Ythdf[RNAi]/+ vs. MB247-G4/+ = +0.04[95CI −0.11, +0.2] p = 0.835. MB247-G4; UAS-Ythdf[RNAi] vs MB247-G4/ + −0.25[95CI −0.46, −0.05] p = 0.002. F Re-expression of Mettl3 only in MB neurons rescued STM defects in Mettl3 trans-heterozygous mutants. MB247-G4; UAS-Mettl3[null]/+ vs. MB247-G4/+ −0.04[95CI −0.23, +0.12] p = 0.86. Mettl3[null]/Mettl3[Δcat] vs. MB247-G4/+ = −0.28[95CI −0.45, −0.13] p = 0.004. MB247-G4/UAS-Mettl3; Mettl3[null]/Mettl3[Δcat] vs. MB247-G4/+ = +0.02[95CI −0.12, +0.17] p = 0.766. G Re-expression of Ythdf only in MB neurons improves STM defects in Ythdf hemizygous mutants. MB247-G4; Ythdf[NP3]/Df vs. MB247-G4/+ = −0.25[95CI −0.41, −0.09] p = 0.005. MB247-G4/UAS-Ythdf; Ythdf[NP3]/Df vs. MB247-G4/+ = −0.12[95CI −0.47, +0.03] p = 0.572. STM and locomotion assays were conducted in 20-day-old flies. Each dot in the STM scatter plots represents a PI average of 12 flies. All control–test differences are displayed as effect sizes with error curves and 95% confidence intervals. No null-hypothesis significance testing was performed; two-tailed Mann–Whitney P values are shown for legacy purposes only. For multiple comparisons, several test groups were compared against a common control group. H and I MB structural defects in Mettl3 (H) and Ythdf (I) mutants at 3 weeks. All panels depict GFP driven by MB247-Gal4. H Representative Mettl3 heterozygote (left) and trans-heterozygote mutant (right), showing fusion of β-lobes in the latter. I Representative Ythdf heterozygote (left) and hemizygote mutant (right), showing fusion of β-lobes in the latter. J Quantification of genotypes analyzed in H and I at 1 and 3 weeks; n sizes are labeled. Source data are provided as a Source Data file.

An m6A/Ythdf pathway functions specifically in MB to promote memory

In Drosophila, associative olfactory memory is stored in the intrinsic neurons of the MB9,76. Bearing in mind that Ythdf-mediated regulation has particular impact on STM, we evaluated the effects of its gain-of-function on wild-type MB neurons using MB247-Gal4. Strikingly, MB247-Gal4 > Ythdf flies exhibited compromised STM formation at 20 days, while MB247-Gal4 > Ythdf-3A flies were normal (Fig. 7B). This behavioral defect was relatively specific: flies overexpressing wild-type and mutant Ythdf exhibited similar locomotor activity when quantified over 60 s of tracking (Fig. 7C). Thus, ectopic Ythdf disrupts STM in an m6A-dependent manner.

These data prompted us to investigate the endogenous m6A/Ythdf pathway with respect to the MB more rigorously. Flies depleted of Mettl3 in the MB exhibited STM impairment (Fig. 7D), comparable to whole-animal Mettl3 null mutants (Fig. 2). Similarly, MB247-Gal4 > UAS-Ythdf[RNAi] flies exhibited substantial STM defects (Fig. 7E), comparable to Ythdf null animals (Fig. 3F, G). Thus, Mettl3 and Ythdf are specifically required in MB neurons to facilitate normal STM.

It was possible that these m6A factors act not only in MB neurons, but also in other neural populations, to promote STM. To address the sufficiency of the m6A/Ythdf pathway in MB neurons, we conducted further transgenic rescue tests. Recall that we were able to rescue Mettl3 null animals (Fig. 2G) and Ythdf null animals (Fig. 7A) by pan-neuronal expression of these factors. Now, we tested whether we could do so by expressing them only using MB247-Gal4. Indeed, this fully rescued the STM defects of Mettl3 mutants (Fig. 7F) and substantially improved those of Ythdf mutants (Fig. 7G). Therefore, even though m6A regulation undoubtedly impacts most cell types in the animal, the m6A/Ythdf pathway plays a cell-autonomous role in MB neurons to mediate STM.

To investigate whether this might be potentially associated with effects on MB structure, we introduced a UAS-GFP transgene into the MB247-Gal4, Mettl3[null] mutant background, which facilitated visualization of the mushroom-body lobes. In Mettl3 heterozyotes, the MB adopts its characteristic morphology: the left and right MB horizontal lobes are distinct (Fig. 7H, top left). However, a majority of Mettl3 mutants exhibit fusion of the MB β-lobes (Fig. 7H, top right). We did not observe comparable fusion of the γ-lobes or shortening of the α-lobes, indicating a spatially restricted effect. We initially conducted these tests at 3 weeks, to align with our functional tests of learning and memory. However, preferential fusion of Mettl3 mutant MB β-lobes was also detected at 1 week, even though their behavioral performance was normal at this time (Supplementary Fig. 3). Accordingly, we tested Ythdf heterozygous and hemizygous mutants, and similarly observed qualitatively similar fusion of MB β-lobes in mutants (Fig. 7I), at both 1 and 3 weeks. Our MB staining data of the two mutants at both timepoints are quantified in Fig. 7J.

At this point, it remains to be determined whether the MB structural defects are diagnostic and a more sensitive readout that precedes subsequent behavioral deficits, or whether these phenotypes occur in parallel. In either scenario, these tests provide substantial evidence that a Drosophila m6A/Ythdf pathway maintains MB structure, and operates cell-autonomously in the MB to mediate odor-avoidance learning.


Distinct local contexts, genic location, and regulatory impact for m6A in different metazoans

Despite tremendous interests in the regulatory utilities and biological impacts of mRNA methylation, there has been relatively little study from invertebrate models. Given that the m6A pathway seems to have been lost from C. elegans, Drosophila is an ideal choice for this. Since the initial report that Mettl3 mutants affect germline development52, we and others showed that Drosophila harbors an m6A pathway similar to that of mammals, but simplified in that it has a single nuclear and cytoplasmic YTH reader53,54,55. Nevertheless, Drosophila has proven to be a useful system to discover and characterize novel m6A factors54,55,77,78. Expanding the breadth of model systems can increase our appreciation for the utilization and impact of this regulatory modification.

It is widely presumed, based on mammalian profiling, that metazoan m6A is enriched at stop codons and 3′ UTRs. However, our high-resolution maps indicate that 5′ UTRs are by far the dominant location of methylation in mature Drosophila mRNAs. Although further study is required, many of these m6A 5′ UTR regions coincide with our previous embryo miCLIP data (e.g. Supplementary Fig. 7), while other miCLIP CIMs calls located in other transcript regions55 proved usually not to be Mettl3-dependent. Thus, our data indicate a fundamentally different distribution of m6A in Drosophila mRNAs compared to mammals.

While mammalian m6A clearly elicits a diversity of regulatory consequences, depending on genic and cellular context and other factors, a dominant role is to induce target decay through one or more cytoplasmic YTH readers. This harkens back to classic observations that m6A is correlated with preferential transcript decay79, and more recent data that loss of m6A writers80,81,82 or cytoplasmic YTH readers29,32 results in directional upregulation of m6A targets. However, several lines of study did not yield convincing evidence for a broad role for the Drosophila m6A pathway in target decay. Instead, the dominant localization of m6A in fly 5′ UTRs is suggestive of a possible impact in translational regulation. Our genomic and genetic evidence support the notion that m6A is preferentially deposited in transcripts with overall lower translational efficiency, but that m6A/Ythdf may potentiate translation. However, we can rationalize a regulatory basis for these apparently opposite trends, if the greater modulatory window of poorly translated loci is utilized for preferred targeting by m6A/Ythdf.

As is generally the case for mammalian m6A, the choice of how appropriate targets are selected for modification, and which gene regions are preferentially methylated, remains to be understood. The minimal context for m6A is insufficient to explain targeting, and as mentioned also seems to be different between Drosophila and vertebrates. A further challenge for the future will be to elucidate a mechanism for m6A/Ythdf-mediated translational regulation. This will reveal possible similarities or distinctions with the multiple strategies proposed for translational regulation by mammalian m6A, which include both cap-independent translation via 5′ UTRs during the heat-shock response via eIF383 or YTHDF236; cap-dependent mRNA circularization via Mettl3-eIF3H84; and activity-dependent translational activation in neurons34.

Roles for the m6A/DF1 pathway in learning and memory

Recent studies have highlighted neuronal functions of mammalian m6A pathway factors39. There is a growing appreciation that mouse mutants of multiple components in the m6A RNA-modification machinery affect learning and memory34,46,48,49,50. Here, we provide substantial evidence that, in Drosophila, neural m6A is critical for STM. We specifically focused on STM as this paradigm has been extensively characterized in Drosophila. Mouse studies have almost exclusively examined effects on LTM, and these two memory phases are mechanistically distinct85,86. One main distinction is that LTM requires protein synthesis after training, while STM does not. So, while direct comparisons between the two systems are not possible, it is nevertheless instructive to consider the parallels and distinctions of how m6A facilitates normal memory function in these species. This is especially relevant given that both mouse and fly central nervous systems require a cytoplasmic YTH factor for memory.

In mice, the m6A writer Mettl3 enhance long-term memory consolidation, potentially by promoting the expression of genes such as Arc, c-Fos and others46. Another study found that Mettl14 is required for LTM formation and neuronal excitability49. Conversely, knockdown of the m6A demethylase FTO in the mouse prefrontal cortex resulted in enhanced memory consolidation48. Amongst mammalian YTH m6A readers, YTHDF1 was shown to induce the translation of m6A-marked mRNA specifically in stimulated neurons34. In cultured hippocampal neurons, levels of YTHDF1 in the PSD fraction were found to increase by ~30% following KCl treatment. This suggests that YTHDF1 concentration at the synapse could be critical for regulating the expression levels of proteins (such as CaMK2a) involved in synaptic plasticity87. Taken together, these studies suggest the m6A pathway is a crucial mechanism of LTM consolidation in mammals that optimizes animal behavioral responses.

Of note, the genetics and sample sizes possible in Drosophila permit comprehensive, stringent, and anatomically resolved analyses88. Thus, in our study, we systematically analyze all writer and reader factors, and reveal a notable functional segregation, suggesting that the cytoplasmic reader Ythdf is a major effector of Mettl3/Mettl14 m6A in memory. Given that Ythdf mutants otherwise exhibit few overt developmental or behavioral defects in normal or sensitized backgrounds (while Ythdc1 mutants generally phenocopy Mettl3/Mettl14 mutants) its role in STM is a surprising insight into the contribution of Ythdf to a critical adaptive function. Moreover, we can pinpoint the spatial requirements of m6A for STM, by showing that (1) neuronal-specific and MB-specific depletion of Mettl3/Ythdf can induce defective STM, and (2) neuronal and MB-specific restoration of Mettl3 or Ythdf to their respective whole-animal knockouts restores normal STM. Moreover, the fact that Ythdf gain-of-function in the MB can also disrupt STM, but does not generally alter other aspects of development or behavior, points to a homeostatic role of m6A regulation in Drosophila learning and memory.

We observed that STM defects in fly m6A mutants are age-dependent, which has not been reported in mammals. Although many physiological capacities decline with life history, the observed STM defects seem to be decoupled from other age-related phenotypes, since mutation of Ythdf or neural overexpression of Ythdf can interfere with STM but does not substantially impact lifespan or locomotion. In this regard, Mettl3 and Ythdf are different from classical memory genes such as rutabaga89 because STM impairment in m6A mutants was absent in young flies and only became apparent with progressing age.

One interpretation is that there is a cumulative effect of deregulated m6A networks that has a progressive impact specific to mushroom-body neurons. To gain further mechanistic insights, future studies will need to examine age-related changes in gene expression and/or translation, in a cell-specific manner. It remains to be seen whether specific deregulated targets downstream of Ythdf have large individual effects, or whether the STM deficits arise from myriad small effects on translation. Ythdf-CLIP and ribosome profiling from the CNS may prove useful to decipher this. Assuming that loss of translational enhancement of m6A/Ythdf targets mediates STM defects, one possibility, to be explored in future studies, is that some targets may already be known from prior genetic studies of memory5.


m6A reader constructs

We obtained full-length cDNAs obtained by PCR from a cDNA library for Ythdc1 (encoding Ythdc1-PA, 721aa), and Ythdf (encoding Ythdf-PA, 700aa) into pENTR vector. We then used site-directed mutagenesis (primers listed in Supplementary Dataset 6) to generate pENTR-Ythdc1-3A (w276A w327A L338A), and pENTR-Ythdf-3A (w404A-W459A-w464A). These were transferred into the Drosophila Gateway vector pAGW (N-terminal GFP fusion) and pAHW (N-terminal HA tag) to make all combinations of tagged wild-type and “3A” mutant versions for expression in Drosophila cell culture. We also cloned the Ythdf sequences into pTHW (N-terminal HA fusion) to generate UAS-HA-Ythdf and UAS-HA-Ythdf-3A for transgenes. For mammalian expression, we cloned wild-type and “3A” mutant versions of Ythdc1 and Ythdf into pcDNA5/FRT/TO with an N-terminal 3xFlag-tag.

m6A probe pulldown with fly Ythdf and Ythdc1

As we were unable to purify sufficient amounts of full-length Drosophila Ythdf and Ythdc1 proteins from Drosophila cell culture for in vitro characterization, we instead turned to purifying them from mammalian cells. For initial interaction tests of wild-type Flag-Ythdc1/DF with A/m6A RNA probes, we seeded 4 million HEK293T cells in a 10 cm dish 24 h prior to calcium phosphate transfection, and used 10 µg of plasmid DNA (pcDNA-3xFlag-Ythdc1/DF constructs) per 10 cm dish. Cells were harvested 24 h post transfection. Cells from one 10 cm dish and 0.6 mL of lysis buffer were used per condition. Cells were lysed in NP-40 lysis buffer (50 mM Tris–HCl pH 7.5, 150 mM NaCl, 0.5% NP-40, 5 mM MgCl2, EDTA-free protease inhibitor tablet (Roche), 1 mM PMSF) on ice. Clarified lysate was then incubated with A or m6A containing RNA probe (Supplementary Dataset 6) on ice at 1 µM concentration for 20 min. Reactions were then irradiated with 365 nm UV (Spectroline ML-3500S) on ice for 10 min. The reaction was then incubated with 60 µL of high capacity streptavidin agarose 50% bead slurry (Pierce #20357) at 4 °C on a rotatory wheel for 3 h. The beads were then washed with 1% SDS in TBS (3 × 1 mL), 6 M urea in TBS (3 × 1 mL), and TBS (3 × 1 mL). The RNA-bound proteins were eluted by boiling the beads in 50 µL of 1× Laemmli sample buffer (80 mM Tris–HCl pH 6.8, 2% SDS, 10% glycerol, 5% B-mercaptoethanol, 0.02% bromophenol blue) at 95 °C for 5 min. The input, flow-through, and eluates were separated by SDS–PAGE and analyzed by Western blotting using mouse α-Flag M2 (Sigma #F1804).

In the experiment where 3A mutants of Ythdf and Ythdc1 were tested, cells from two 10 cm dishes and 1.2 mL of lysis buffer were used per condition. The cross-linking and pull-down were performed as described above. AAACU and AA-m6A-CU sequences were used for this experiment.

Proteomic profiling of the fly m6A interactome

Mass spectrometry analysis

For proteomics experiments with Drosophila S2 cells, we adapted our previously described method57. S2 cells were lysed by cryomilling. The resulting cell powder (750 mg) was first extracted with 1.5 mL of low-salt extraction buffer (20 mM Tris–HCl pH 7.5, 10 mM NaCl, 2 mM MgCl­2, 0.5% Triton X-100, 10% glycerol, protease inhibitor tablet (Roche), and phosphatase inhibitor (Pierce)), and then 1 mL of high-salt extraction buffer (50 mM Tris–HCl pH 7.5, 420 mM NaCl, 2 mM MgCl­2, 0.5 % Triton X-100, 10% glycerol, protease inhibitor tablet (Sigma) and phosphatase inhibitor (Pierce)). Low-salt and high-salt extracts were pooled, and protein concentration was determined by Bradford assay. The pooled extract was diluted to 3 mg/mL if needed before proceeding to photo-crosslinking.

AAACU or AA-m6A-CU oligo probe was added to 2 mL of extract to a final concentration of 1 µM. The reactions were incubated on ice for 20 min prior to photo-cross-linking. The reactions were then irradiated with 365 nm UV (Spectroline ML-3500S) on ice for 15 min. The reaction was then incubated with 60 µL of high capacity streptavidin agarose 50% bead slurry (Pierce #20357) at 4 °C on a rotatory wheel for 3 h. The beads were then washed with 1% SDS in TBS (3 × 1 mL), 6 M urea in TBS (3 × 1 mL), and TBS (3 × 1 mL). The RNA-bound proteins were eluted with RNase cocktail (Thermo Fisher) in RNase elution buffer (10 mM Tris–HCl pH 7.5, 40 mM NaCl, 1 mM MgCl2) at 37 °C for 30 min with periodic agitation.

The proteomics files were searched against Drosophila melanogaster database downloaded from UniProt ( To plot the mass spectrometry data (Fig. 1d), we first removed 242 proteins that were not consistently recovered in both replicate datasets, leaving 353 proteins. To calculate enrichment ratios for proteins identified by only one probe, we added 1 to all spectral count values. Proteins that do not exhibit differential binding to the A/m6A probes cluster around the plot origin, and we thresholded at 2.0× the interquartile range.

Analysis of m6A by liquid chromatography-coupled mass spectrometry

Total RNA was extracted from Drosophila S2 cells and whole female fly (one-week old) using TRIzol reagent and subjected to DNase treatment (Thermo Fisher #AM1907). The mRNA was then isolated through two rounds of poly-A selection using the oligo-d(T)25 beads (NEB #S1419S). The RNA was digested with nuclease P1 (Wako USA #145-08221) and dephosphorylated with Antarctic phosphatase (NEB #M0289S). Briefly, 1 µg of RNA was digested with 2 units of nuclease P1 in buffer containing 7 mM NaOAc pH 5.2, 0.4 mM ZnCl2 in a total volume of 30 µL at 37 °C for 2 h. 3.5 µL of 10× Antarctic phosphatase buffer and 1.5 µL of Antarctic phosphatase was then directly added to the reaction and incubated at 37 °C for another 2 h.

Quantitative LC–MS analysis of m6A was performed on an Agilent 1260 Infinity II HPLC coupled to an Agilent 6470 triple quadrupole mass spectrometer in positive ion mode using dynamic multiple reaction monitoring (DMRM). The ribonucleosides in the digested RNA samples were separated by a Hypersil GOLD™ C18 Selectivity HPLC Column (Thermo Fisher #25003-152130; 3 µm particle size, 175 Å pore size, 2.1 × 150 mm; 36 °C) at 0.4 mL/min using a solvent system consisting of 0.1% formic acid in H2O (A) and acetonitrile (B) based upon literature precedent90. The operating parameters for the mass spectrometer were as follows: gas temperature 325 °C; gas flow 12 L/min; nebulizer 20 psi and capillary voltage 2500 V, with fragmentor voltage and collision energy optimized for each different nucleoside. The nucleosides were identified based on the transition of the parent ion to the deglycosylated base ion: m/z 282 → 150 for m6A and m/z 268 → 136 for A. Calibration curves were constructed for each nucleoside using standards prepared from commercially available ribonucleosides. The level of m6A was determined by normalizing m6A concentration to A concentration in the sample.

Drosophila stocks

Ythdf[NP3], FRT40A and Mettl14[sk1]/Tb-RFP cyo,w+ were previously described55. Ythdc1[∆N]/Dfd-YFP, TM3; Mettl3[∆cat]/TM6C, Mettl3[null]/TM6C, Mettl14[fs]/Tb-RFP cyo,w+; UAS-Mettl3-HA were a gift of Jean-Yves Roignant54. All of these were genotyped in trans to deficiencies (see Supplementary Dataset 6) to confirm the absence of the wild-type allele. Other stocks were obtained from the Bloomington Drosophila Stock Center. Deficiency lines: Df(3R)Exel6197 (BL-41590, removes Mettl3), Df(3L)ED208 (BL-34627, removes Ythdc1), Df(3R)BSC461 (BL-24965, removes Ythdf) and Df(3R)BSC655 (BL-26507, removes Ythdf). TRiP knockdown lines: Mettl3 (BL-41590), Mettl14 (BL-64547), Ythdc1 (BL-34627) and Ythdf (BL-55151). Gal4 lines: elav-gal4 (BL-8765), elav[C155]-Gal4 (BL-458), ptc-Gal4 (BL-2017), tub-Gal4 (BL-5138), da-Gal4 (BL-55851), ap-Gal4 (BL-3041), MB247-Gal4 (mef2-Gal4, BL-50742).

To generate the tub-aqz-GFP reporter, we cloned the aqz 5′UTR (chr3R:8,818, 731-8,820,682) into the 5′UTR position of the tub-GFP vector (KpnI/BamHI). tub-aqz-GFP, UAS-HA-Ythdf and UAS-HA-Ythdf-3A (described above) were injected into w[1118] with ∆2-3 helper plasmid to obtain transformants (Bestgene, Inc.)

Flies were raised on standard cornmeal-based food medium containing 1.25% w/v agar, 10.5% w/v dextrose, 10.5% w/v maize, and 2.1% w/v yeast at 60% relative humidity.

Survival experiments

All Drosophila survival experiments were performed with mated female flies at 23 °C. Throughout the lifespan assessment, flies were kept in vials in groups of 10 and transferred to a new food vial every second or third day. The number of surviving flies was counted after each transfer. Average lifespan was calculated using the DABEST estimation statistics package91. The data were plotted to compare the average survival of each tested genotype against the average survival of the w[1118] control stock that was assayed in parallel.


The MOT apparatus was designed to allow the monitoring of Drosophila behavior throughout olfactory conditioning in a controlled environment16. Flies were assayed in conditioning chambers, whereby the arena of each chamber was 50 mm long, 5 mm wide, and 1.3 mm high (Supplementary Fig. 2a). The floor and ceiling of each chamber was composed of a glass slide printed with transparent indium tin oxide electrodes (Walthy, China). Each side of the electrode board was sealed by a gasketed lid that formed a seal around the gap between the electrode board and the chamber wall. Facilitated by carrier air, the odors entered the chamber via two entry pipes and left the chamber through two vents that were located in the middle of the chamber. Up to four MOT chambers were stacked onto a rack which was connected to the odor and electric shock supply (Supplementary Fig. 2b). Chambers were illuminated from the back by two grids of infrared LEDs. Behavior inside the chambers was recorded with an AVT F-080 Guppy camera (Allied Vision) that was connected to a video acquisition board (PCI-1409, National Instruments). Electric shock during odor presentation is delivered when the animals walk on the electrode contacts. Olfactory preference was measured by tracking the movement of individual flies and scored automatically by using a custom tracking and control program (CRITTA)92.

Odor delivery and odor concentrations

Odor delivery in the MOT was done as previously described16, with some protocol modifications. The rack with stacked conditioning chambers was connected to an olfactometer that was used to deliver precisely timed odor stimuli (Supplementary Fig. 2b). The conditioning odors methylcyclohexanol (MCH) and 3-octanol (OCT) were carried by dry, compressed air and routed through mass flow controllers (MFC; Sensirion AG). Carrier air flow was controlled with two 2 L/min capacity MFCs and pushed through a humidifying gas washing bottle containing distilled water (Schott Duran) at 0.6 L/min. Odor streams were controlled with 500 mL/min MFCs and pushed through glass vials containing pure liquid odorants (either MCH or OCT, respectively). Prior to conditioning, the odor concentrations were adjusted to ensure that flies did not display a strong preference for one of the odors over the other prior to training. Odor administration was carried out with the following MFC settings: OCT left side 25–35 mL/min; OCT right side 30–40 mL/min; MCH left side 50–60 mL/min; MCH right side 50–60 mL/min. Odor presentation at the behavioral chamber arms was switched with computer-controlled solenoid valves (The Lee Company, USA). The MFCs were regulated via CRITTA (LabView software). At ad hoc intervals between experiments, odor concentrations were measured with a photoionization detector (PID, RAE systems; PGM-7340). The experiments were performed with a relative concentration of 14–16 parts per million (ppm) for MCH and 6–8 ppm for OCT in the chambers. A relative humidity of 70–75% was maintained via regulation of the air flow; this was monitored (ad hoc, between experiments) by using a custom humidity sensor with a custom LabVIEW code (National Instruments, USA).

Olfactory conditioning and data visualization

Classical olfactory conditioning has been described previously5,6,16. Before each experiment, flies were briefly anesthetized on ice and six flies were loaded into each conditioning chamber (Supplementary Fig. 2A–B). Each conditioning experiment began with an acclimatization (baseline test) phase where Drosophila were exposed to both odors in the absence of a shock stimulus. Subsequently, in the first stage of training the chambers were flushed with carrier air and flies were exposed to either MCH or OCT in the presence of a shock stimulus (12 shocks at 60 V during a 60–s time interval). During the second stage of training the shock-paired odor was removed and the flies were exposed to the other odor in the absence of shock. After removal of the odor and air-puff agitation, flies were tested for shock-odor avoidance. The flies were given a choice between the two odors and average shock-odor avoidance was quantified for the last 30 s of the 2 min-long testing phase. The main stages of the conditioning protocol are summarized in Fig. 2b. The full conditioning protocol is presented in Supplementary Fig. 2d. The shock-odor avoidance of flies for each conditioning trial was expressed as a performance index (PI)6; however, instead of a single endpoint, counting was performed on individual video frames over the final 30 s of the testing period. Each trial produced a half PI against the respective conditioned odor (either MCH or OCT) and two half PI’s from consecutive experiments (with different conditioning odors) were combined to a full PI (full PI = half PI OCT + half PI MCH). For data visualization, the distribution of full PI’s was plotted with a 95% CI error presenting a ΔPI between control and test genotypes by using the DABEST estimation-statistics package91.

Behavioral data analysis

Analyses of STM and survival experiments were performed with estimation statistics93,94,95. The rationale for the estimation framework was described previously91,96. For data analysis and visualization, the individual values of full PIs were plotted with standard-deviation lines; to describe the differences between control and test genotypes, the distributions of ∆PI with 95% confidence intervals were plotted with the DABEST estimation package ( Using this approach, we avoid null-hypothesis significance testing97,98 in favor of estimation plots, which show the relevant effect sizes and comprehensive distributional information of both observed and inferred values, focusing on the intervention effect size. For legacy purposes only, the two-group comparison permutation P values are listed in the respective legends for each figure. The sample size of at least 72 flies per group for behavioral experiments was based on precision planning to accommodate an average target margin of error of 0.33 standardized effect-size units94. This is equivalent to 80% power to detect a 0.5 SD effect size (

Drosophila immunostaining

We performed immunostaining as previously described99, by fixing dissected tissues in PBS containing 4% formaldehyde and incubating with the following primary antibodies: mouse α-HA (1:1000, Santa Cruz), and guinea pig α-Mettl3 (1:2000, gift of Cintia Hongay, Clarkson University). Alexa Fluor-488, and -568 secondary antibodies were from Molecular Probes and used at 1:1000. Tissues were mounted in Vectashield mounting buffer with DAPI (Vector Laboratories). Images were captured with a Leica SP5 confocal microscope; endogenous GFP signals were monitored.

m6A individual-nucleotide-resolution cross-linking and immunoprecipitation (miCLIP)

miCLIP libraries were prepared by subjecting RNA samples to the established protocol66 with the minor changes described below. Briefly, total RNA was collected from <1-week-old w1118 (wild type) and Mettl3[null] (mutant) female heads using TRIzol RNA extraction. Poly(A) + RNA was enriched using two rounds of selection. RNAs were fragmented, incubated with α-m6A (202 003 Synaptic Systems) and crosslinked twice in a Stratalinker 2400 (Stratagene) using 150 mJ/cm2. Crosslinked RNAs were immunoprecipitated using Protein A/G magnetic beads (Thermo) and washed under high salt conditions to reduce non-specific binding. Samples were radiolabeled with T4 PNK (NEB), ligated to a 3′ adaptor using T4 RNA Ligase I (NEB), and purified using SDS–polyacrylamide gel electrophoresis (SDS–PAGE) and nitrocellulose membrane transfer. RNA fragments containing crosslinked antibody peptides were recovered from the membrane using proteinase K (Invitrogen) digestion.

Recovered fragments were subjected to library preparation. First-strand cDNA synthesis was performed using SuperScript III (Life Technologies) and iCLIP-barcoded primers, which contain complementarity to the 3′ adaptor on the RNA. cDNAs were purified using denaturing PAGE purification, circularized using CircLigase II (EpiCentre), annealed to the iCLIP Cut Oligo, and digested using BamHI (Thermo). To generate libraries for sequencing, the resulting linear cDNAs were amplified using Accuprime SuperMix I (Invitrogen) and P5 and P3 Solexa primers, and purified using Agencourt AMPure XP beads (Beckman Coulter).

For input libraries, poly(A) + RNAs were fragmented and directly subjected to radiolabelling and 3′ adaptor ligation. All subsequent steps are as listed above. Libraries were paired-end sequenced on an Illumina HiSeq2500 instrument at the New York Genome Center (NYGC).

miCLIP bioinformatic analyses

Read processing, mutation calling, and annotation of CIMs was performed as described66. Briefly, to prepare libraries for mapping, adapters and low-quality reads were trimmed using flexbar v2.5. Next, the FASTQ files were de-multiplexed using the script from the pyCRAC suite. Random barcodes were removed from sequencing reads and appended to sequence IDs using an awk script and PCR duplicates were removed using the pyCRAC script. Paired end reads were merged and mapped to the Drosophila reference genome sequence (BDGP Release 6/dm6) using Novoalign (Novocraft) with parameters –t 85 and −l 16.

Mutations were called using the CIMS software package100. To identify putative m6A sites, C-to-T transitions with preceding A nucleotides were extracted and filtered such that the number of mutations that support the mismatch (m) > 1 and 0.01 < m/k < 0.5, where k is the number of unique tags that span the mismatch position.

Peaks were called by adapting the model-based analysis for ChIP-Seq (MACS) algorithm101. Mettl3-dependent peaks for head libraries were determined using miCLIP versus input, comparing wild type and Mettl3 libraries and the MACS2 differential binding events program (bdgdiff) with parameters −g 20 and −l 120. Lastly, peaks were split using PeakSplitter (version 1.0,

To generate nucleotide content plots, filtered C-to-T transitions with preceding A nucleotide (as mentioned above) that mapped within the top 100 or 1000 Mettl3-dependent peaks were chosen to describe the nucleotide content surrounding CIMs. Sequences were obtained using the Drosophila reference genome sequence (dm6) and fed to WebLogo version 2.8.2 with the frequency setting102.

Custom scripts were used to generate metagene plots. Briefly, to prepare mapped data, each miCLIP bam file was converted to bedGraph format with span of 1 nucleotide. To prepare features, for each gene, the longest transcript model was selected and divided into 5′ UTR, CDS and 3′ UTR segments according to Ensembl transcript models for BDGP6.94. Next, miCLIP read depth mapping to transcripts were selected and scaled such that each 5′ UTR, CDS and 3′ UTR were 200, 1000, and 300 nts. To normalize, the score at each scaled nucleotide was divided by the total score across all 1500 nucleotides. Finally, to yield metagene score across each feature (UTRs and CDS), genes of interest were selected and means were calculated for each nucleotide position. Smoothing functions from the ggplot2 package103 were used to visualize metagene analysis.

Pie charts were obtained by mapping peaks to Ensembl transcript models for BDGP 6.94. Since transcript features occasionally overlap, the following order was used to bin peaks into different categories: other (not mapping transcript models), introns, start codons, 5′ UTRs, 3′ UTRs, and CDS. Finally, the ggplot2 function geom_bar was used to plot the accounted annotations into a pie chart.

Input normalized miCLIP tracks along with described peaks were used to generate heatmaps using deepTools2 functions computeMatrix and plotHeatmap104.

RNA-seq analysis

Flies of the specified genotypes(w;;Mettl3[null]/+, w;;Mettl3[null]/Mettl3[cat], w;;Df(3R)BSC461/ + , w;;Ythdf[NP3]/Df(3R)BSC461, were aged to 1 or 3 weeks at 25 °C. Female heads were dissected and collected for total RNA extraction using TRIzol reagent. Sequencing libraries were prepared using the TruSeq Stranded Total RNA Sequencing Kit (Illumina) following the manufacturer’s protocol. Sequencing was performed on a HiSeq 2500 System in paired end read mode, with 100 bases per read at the Integrated Genomics Operation (IGO) at Memorial Sloan Kettering Cancer Center.

RNA sequencing libraries were mapped to the Drosophila reference genome sequence (BDGP Release 6/dm6) using HISAT2105 under the default settings. Gene counts were obtained by assigning and counting reads to the Ensembl transcript models for BDGP6.94 using Rsubread106. Differential gene expression analysis was performed with comparisons as listed in Supplementary Dataset 5 using the R package DESeq2107 and applying a strict adjusted p-value cutoff of 0.05.

CRISPR/Cas9 deletion of Mettl3 in S2-S cells

We used CRISPR/Cas9-mediated mutagenesis as described67 to generate Mettl3-KO S2 cell lines. Guide RNA sequences are listed in Supplementary Dataset 6. We analyzed 11 candidate clonal lines obtained from subcloning of two initial low-complexity mixed cell populations, and kept the deletions #3-5 and #4-3 as described in Supplementary Fig. 11.


We adapted a protocol from our recent study55. Plasmids of 5 µg were transfected into 6 × 10[6] S2 cells using Effectene (Qiagen) and incubated for 3 days. Cells were washed with PBS and lysed with IP lysis buffer (30 mM HEPES, pH 7.5, 150 mM KOAc, 2 mM Mg(OAc)2, 5 mM DTT, 0.1% NP40) supplied with Complete, EDTA-free Protease Inhibitor and 40 U mL−1 SUPERase•In RNase Inhibitor (Ambion) on ice for 30 min, followed by 2 × 10 min centrifugation at 20,000×g at 4 °C. 10% of the cleared cell lysate were kept as input and the rest was incubated with 15 µL Dynabeads™ Protein G (Thermo Fisher,10004D) (with HA or GFP antibody) for 4 h at 4 °C. RNase I (Invitrogen, AM2294) was added to the sample for RNase treatment at 0.2 U final concentration. The beads were washed three times using IP lysis buffer and then resuspended in 100 mL lysis buffer. To elute RNA, the beads were mixed with 900 mL of Trizol, vortexed for 1 min and incubated at RT for 50 with rotation. RNA extracted and treated were Turbo DNase (Ambion) for 30 min before cDNA synthesis using SuperScript III (Life technology) with random hexamers. PCRs were done using fusion high-fidelity polymerase (ThermoFisher Scientific).

For m6A-RIP-qPCR, the mRNAs were immunoprecipitated using α-m6A according to the procedure shown above. The IP-mRNAs were then reverse transcribed and amplified following the same protocol. The enrichment of m6A was quantified using qPCR as reported. The sequences of qPCR primers are listed in Supplementary Dataset 6.

RNA degradation assay

S2 cells were seeded as 3 × 106 cells per well. Actinomycin-D (Gibco, 11-805-017) was added to a final concentration of 5 μM, and cells were collected before or 5 h after adding actinomycin-D. Then the cells were processed as described in ‘RT–qPCR’, except that the data were normalized to the t = 0 time point.

SUnSET assay and Western blotting

For each assay, we incubated 3 × 10[6] cells in 1 mL Schneider’s medium including 10% FBS for 5 min at 25 °C with or without 5 μg/mL puromycin (Gibco™ Sterile Puromycin Dihydrochloride). Cells were then washed twice with cold PBS, and lysed with 100 µL lysis buffer (10 mM Tris–HCl, pH 7.5, 300 mM NaCl, 1 mM EDTA, 1% Triton X-100, Protease Inhibitor Cocktail Roche). The cell pellet was resuspended by pipetting and incubated on ice for 30 min, then centrifuged at 16,000×g for 10 min at 4 °C. Protein concentration was measured using Bio-Rad Protein Assay Dye (500–0006) and 2.5 µg proteins were separated on SDS–PAGE and transferred to Immobilon-P membranes. Membranes were blocked for 1 h in TBS containing 5% nonfat milk and 0.1% Tween-20, followed by incubation with mouse α-puromycin (1:1000) overnight at 4 °C. Appropriate secondary antibodies conjugated to HRP (Jackson) were used at 1:5000 for 1 h at room temperature, then visualized using chemiluminescence detection (Amersham ECL Prime Western Blotting Detection Reagent). Mouse α-puromycin (2A4, 1:1000) and mouse α-ß-tubulin (E7, 1:1000) were from DSHB; guinea pig α-Mettl3 (1:5000) was a gift from Cintia Hongay.

Luciferase sensory assays

To generate the pAc5.1-aqz-wt-luc reporter, we cloned the aqz 5′ UTR (chr3R:8,818,731–8,820,682) into the 5′ UTR pAc5.1-luc vector encoding Firefly Luciferase (KpnI/EcoRI). We then used site-directed mutagenesis (primers listed in Supplementary Dataset 6) to generate pAc5.1-aqz-M-luc (8820387A, 8820401A into T).

To assay luciferase reporter activity and mRNA levels, 106 S2 cells were seeded per well of 12-well plate and transfected with 150 ng pAc5.1-Renilla, and 150 ng pAc5.1-aqz-wt-luc, or pAc5.1-aqz-M-luc constructs. Luciferase activities were measured 3 days after transfection using Dual Glo luciferase assay system (Promega) and Cytation5 (BioTek) from 100 µL cell from each well of the 12-well plate. We calculated the ratio between Firefly and Renilla luciferase activities. The remaining cells in the 12-well plate were processed to extract total RNA (DNase I digested) by TRIzol® reagent (Invitrogen), followed by RT-qPCR quantification. The level of F-luc mRNA was normalized by that of R-luc mRNA.

Reporting summary

Further information on research design is available in the Nature Research Reporting Summary linked to this article.