Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Transforming carbon dioxide into jet fuel using an organic combustion-synthesized Fe-Mn-K catalyst


With mounting concerns over climate change, the utilisation or conversion of carbon dioxide into sustainable, synthetic hydrocarbons fuels, most notably for transportation purposes, continues to attract worldwide interest. This is particularly true in the search for sustainable or renewable aviation fuels. These offer considerable potential since, instead of consuming fossil crude oil, the fuels are produced from carbon dioxide using sustainable renewable hydrogen and energy. We report here a synthetic protocol to the fixation of carbon dioxide by converting it directly into aviation jet fuel using novel, inexpensive iron-based catalysts. We prepare the Fe-Mn-K catalyst by the so-called Organic Combustion Method, and the catalyst shows a carbon dioxide conversion through hydrogenation to hydrocarbons in the aviation jet fuel range of 38.2%, with a yield of 17.2%, and a selectivity of 47.8%, and with an attendant low carbon monoxide (5.6%) and methane selectivity (10.4%). The conversion reaction also produces light olefins ethylene, propylene, and butenes, totalling a yield of 8.7%, which are important raw materials for the petrochemical industry and are presently also only obtained from fossil crude oil. As this carbon dioxide is extracted from air, and re-emitted from jet fuels when combusted in flight, the overall effect is a carbon-neutral fuel. This contrasts with jet fuels produced from hydrocarbon fossil sources where the combustion process unlocks the fossil carbon and places it into the atmosphere, in longevity, as aerial carbon - carbon dioxide.


For more than a century our industrial society and humankind’s prosperity, wealth and well-being, have been based on the combustion of hydrocarbon fossil fuels. However, it is abundantly clear this has disturbed the natural environment by the emission of greenhouse gases, most notably carbon dioxide (CO2), nitrous oxide, and methane1. Nevertheless, the use of fossil fuels continues to grow with an expected annual increase of 1.3% to 20302, continually exacerbating this problem in the form of climate change Air transport, playing a significant role in the modern world in worldwide social contact, business and marketing, is a recognized source of high CO2 emissions3.

Jet fuel, the generic name for the aviation fuels used in gas-turbine powered aircraft has as its main components linear and branched alkanes and cycloalkanes with a typical carbon chain-length distribution of C8–to- C18, and where the ideal carbon chain length is C8–C164.

Given these recognised environmental concerns, it is now imperative to develop clean, energy-efficient technologies for producing sustainable or renewable aviation fuels5.

Converting CO2 into fuels and high value-added chemicals has attracted significant worldwide interest in the past few years, as it not only contributes to mitigating greenhouse gas emissions but also produces valuable chemical commodities6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24. As such, CO2 conversion and utilization should be taken both an integral and important part of greenhouse gas control and sustainable development.

Nevertheless, the activation of CO2 is extremely challenging; CO2 is a fully oxidized, thermodynamically stable and chemically inert molecule. Furthermore, hydrocarbon synthesis via the hydrogenation of CO2 usually favours the formation of short-chain, rather than desirable long-chain, hydrocarbons. Hence most of the research in this area have focused on the selective hydrogenation of CO2 to CH4, the oxygenates, CH3OH, HCOOH, and light olefins (C2–C4 olefins)22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41, There have been limited studies on producing liquid hydrocarbons of molecularity C5+42,43,44.

There are two ways to convert CO2 to liquid hydrocarbons; an indirect route, which converts CO2 to CO or methanol and subsequently into liquid hydrocarbons, or the direct CO2 hydrogenation route, which is usually described as a combination of the reduction of CO2 to CO via the reverse water gas shift (RWGS) reaction and the subsequent hydrogenation of CO to long-chain hydrocarbons via Fischer-Tropsch synthesis (FTS)45. Jet fuel can then be obtained from the products after industrially recognized treatments such as distillation or hydro-isomerization. The second, direct route is generally recognized as being more economical and environmentally acceptable as it involves fewer chemical process steps, and the overall energy consumption for the entire process is lower46.

The relevant chemical reactions for hydrocarbon fuel production are:

Hydrogenation of CO2:

$${\mathrm{CO}}_2 + 3{\mathrm{H}}_2 \rightleftarrows - \left( {{\mathrm{CH}}_2} \right) - + 2{\mathrm{H}}_2{\mathrm{O}}\left( {{\Delta} H_{298}^0 = - 125\;{\mathrm{kJ}}\;{\mathrm{mol}}^{ - 1}} \right);$$

The RWGS reaction:

$${\mathrm{CO}}_2 + {\mathrm{H}}_2 \rightleftarrows {\mathrm{CO}} + {\mathrm{H}}_2{\mathrm{O}}\left( {{\Delta} H_{298}^0 = + 41\;{\mathrm{kJ}}\;{\mathrm{mol}}^{ - 1}} \right),\,{\mathrm{and}}$$

The FTS reaction:

$${\mathrm{CO}} + 2{\mathrm{H}}_2 \rightleftarrows - ({\mathrm{CH}}_2) - + {\mathrm{H}}_2{\mathrm{O}}\left( {{\Delta} H_{298}^0 = - 166\;{\mathrm{kJ}}\;{\mathrm{mol}}^{ - 1}} \right)$$

The direct conversion of CO2 into fuels through these various reactions has attracted great attention in recent years, and a compilation of some of these investigations is highlighted in Table 1. However, there are few reports of the direct catalytic conversion of CO2 to jet fuel range hydrocarbons20,47. The key to advancing this process is to search for a highly efficient inexpensive catalyst, that can preferentially synthesise the target hydrocarbon range of interest48. Iron-based catalysts, widely used in both the RWGS and FTS reactions, are typically prepared by chemical co-precipitation routes, which unfortunately consumes significant amounts of water49,50,51,52.

Table 1 Some typical catalysts performance for the direct conversion of CO2 into hydrocarbon fuels; a brief literature overview.

In this investigation, we report the preparation of iron-based catalysts using the Organic Combustion Method (OCM) and determined their catalytic performance for the direct and efficient conversion of CO2 to jet fuel range hydrocarbons. In brief, the Fe–Mn–K catalyst shows a CO2 conversion of 38.2% and selectivity to C8–C16 hydrocarbons of 47.8% with a correspondingly low selectivity for CH4 and CO. In addition, the process also shows a high molar production ratio of olefin-to-paraffin for C2–C4 hydrocarbons.


The rising concerns over climate change and the stringent environmental regulations to deplete the utilization of fossil-derived fuels have generated great opportunities—and major scientific challenges—on the transformation of CO2 into sustainable, synthetic hydrocarbons fuels, particularly in the synthesis of renewable aviation fuels. At the heart of any progress in this area, the all-important conversion process is closely related to the development of advanced catalysts of high performance for the CO2 hydrogenation reaction. Therefore, the utilization of novel methods of catalyst preparation represents an important strategy to produce advanced catalytic formulations having high-performance levels. Among the catalyst synthesis methods, the so-called OCM is recognized as an energy-efficient and economically viable approach for the one-pot synthesis of a variety of nanostructured solid catalysts. In this method, the utilization of an organic fuel, having also a cation-complexation character, to yield a homogenous redox solution of the different metal precursors is highly advantageous. In addition, a relatively moderate self-sustaining exothermic reaction of the redox gel may be beneficial to produce the necessary nanostructured catalysts with an efficient promoter effect due to the well-controlled aqueous chemistry of the preparation route and ensuing combustion conditions.

The performance of Fe–Mn–K catalysts for the hydrogenation of CO2

In terms of the conversion of CO2 and H2 to hydrocarbons and CO, the product selectivities, the Anderson–Schulz–Flory (ASF) product distribution, together with the molar ratio of olefin-to-paraffin ratio for C2–C4 from the hydrogenation of CO2 using a Fe–Mn–K catalysts, is shown in Fig. 1; specifically, both the conversions and selectivities for CO2 hydrogenation are shown for a reaction time of 20 h over a variety of Fe-based catalysts. The GC-MS spectrum of the collected liquid products from the hydrogenation of CO2 on the catalyst Fe–Mn–K is also shown in Fig. 1g. The GC-FID chromatogram of the gaseous hydrocarbon products from CO2 hydrogenation for a reaction time of 20 h, using an example Fe–Mn–K catalyst, is presented in Supplementary Fig. 1.

Fig. 1: Catalyst performance for the hydrogenation of CO2 using a Fe–Mn–K catalyst.

a % conversion of CO2 and H2 as a function of reaction time for the hydrogenation of CO2. b Selectivity of various hydrocarbon products with reaction time for the hydrogenation of CO2. c Molar ratio of olefin-to-paraffin for the C2–C4 range with reaction time for the hydrogenation of CO2. d ASF plot and α values at reaction time of 20 h. e Conversion and CO selectivity of CO2 hydrogenation for a reaction time of 20 h over different catalysts. f Products selectivities of CO2 hydrogenation for a reaction time of 20 h over different catalysts. g GC-MS total ion chromatogram (TIC) of the hydrocarbon fuel from the hydrogenation of CO2 on a Fe–Mn–K catalyst. The jet fuel range hydrocarbons (C8 to C16) are shown.

The data in Fig. 1 illustrate that the Fe–Mn–K catalyst exhibits high activity for the CO2 hydrogenation. The CO2 and H2 conversion increased rapidly with onset of reaction time in the first 5 h, reaching a stable value of around 40%. The methane selectivity decreased from 30 to 10% from the beginning of the reaction until 20 h, and decreased by a small amount after a further 20 h. In contrast, the light olefin selectivity (C2–C4 olefins) increased to an apparent limiting value of 25% at a reaction time of 10 h and above. The liquid product (C5+) selectivity was stable at around 60% and showed a small increase with reaction time. Similarly with FTS, the hydrocarbon products from CO2 hydrogenation on Fe–Mn–K generally follow the ASF distribution. Figure 1d shows a double ASF product distribution53, whose chain growth probabilities (αi) is 0.79 for α1 within the C1–C12 carbon range and α2 is 0.57 for C12+(i.e., heavy hydrocarbons). A high chain growth probability (α1) means a low methane selectivity whilst the chain growth decreases when the carbon number is above 12, indicating lower selectivity for higher (heavier) hydrocarbons.

Compared with the literature results in Table 1, the prepared Fe–Mn–K catalyst showed higher liquid products (C5+) yield, with the catalyst presenting both high CO2 conversion and high C5+ selectivity.

Interestingly, the methane selectivity decreased dramatically at the beginning of the reaction due to the main reaction being CO2 methanation over the catalyst active sites (χ-Fe5C2). They produced a high pressure of water and unconverted CO2 which, importantly, can then oxidize χ-Fe5C2 to Fe3O4. The CO produced via the RWGS reaction on Fe3O4 active site reacts with H2 (Fisher-Tropsch synthesis (FTS)), and the CO2 conversion increased rapidly (Fig. 1a). The product selectivity was then stable after a reaction time of 10 h.

The catalyst also showed a high selectivity for the production of light olefins versus alkanes, with molar ratios of ethylene -to -ethane, propylene-to-propane, and butane-to-butane of 5, 8.5, and 7, respectively (Fig. 1c). The GC-FID chromatograms (Supplementary Fig. 1) also show that olefins were the dominant products in the C2–C4 hydrocarbon fractions. Overall, the Fe–Mn–K catalyst showed high activity for CO2 hydrogenation reactions and high liquid hydrocarbon, and light olefin product selectivity.

The GC-MS spectrum of the collected liquid products clearly demonstrates that the Fe–Mn–K catalyst has high selectivity for jet fuel range hydrocarbons as liquid products; the total jet fuel range hydrocarbon selectivity is up to 47.8% among all hydrocarbons. The corresponding yield of jet fuel range hydrocarbons was 17.2% with a CO2 conversion of 38.2%.

Catalyst characterisation

The catalyst precursor was firstly activated in situ with syngas (H2:CO = 2:1) prior to catalytic performance evaluation, with a GHSV (gas hourly space velocity) conditions of 1000 mL g−1 h−1 at atmospheric pressure, a temperature of 320 °C and for 24 h duration. The powder X-ray diffraction (XRD) spectra of the catalyst precursor, together with the activated and used Fe–Mn–K catalysts are shown in Fig. 2 (a).

Fig. 2: XRD and XPS spectra of the Fe–Mn–K catalyst.

a Powder XRD spectra of the catalyst precursor and both the activated and the used catalyst. The corresponding JCPDS numbers are, for Fe2O3: 00-020-0508; χ-Fe5C2: 00-024-0081; Fe3O4: 03-065-3107; b XPS survey spectrum of the Fe–Mn–K catalyst; c High-resolution XPS spectra in the region of the Fe 2p peak on the Fe–Mn–K catalyst; d XPS spectra of the Mn 2p on the Fe–Mn–K catalyst; e XPS spectra of the O 1s on the Fe–Mn-K catalyst; f XPS spectra of the C 1s on the Fe–Mn–K catalyst.

It can be seen from Fig. 2a, that all the reflections from the catalyst precursor can be assigned to Fe3O4 but in contrast, and importantly, all reflections from the activated catalyst can be assigned to χ-Fe5C2, which indicated that the Fe3O4 is fully carburized to χ-Fe5C2 under the treatment with syngas (CO/H2 ratio of 1:2). The reflections in the powder diffractogram from the used catalyst phase were considerably more complex, consisting of mixtures of Fe3O4, Fe2O3, and χ-Fe5C2. Importantly, χ-Fe5C2 is widely acknowledged to be the active catalytic species in the in situ hydrogenation of CO and/or CO2 and this iron carbide phase plays a crucial role in the subsequent C–C chain growth reactions54,55,56,57.

We have observed that the catalyst precursor is almost fully converted to χ-Fe5C2 during the in situ activation process, whilst Fe3O4 is partially regenerated during the first hours of the catalytic reaction, hence explaining the increases in H2 and CO2 conversion during this period. This finding is perfectly consistent with the recognized “Tandem mechanism” in which these two catalytically active phases (χ-Fe5C2 and Fe3O4) are responsible for the conversion of CO2 and H2 to syngas and for the subsequent C–C chain growth step to produce jet fuel44,58,59,60.

The formation of Fe2O3 in the used catalyst probably arises from the oxidation of Fe3O4 by CO2 and/or water during the reaction, while the Fe2O3 was reduced to Fe3O4 in the presence of H2 (showed in Supplementary Fig. 24).

Crystallite sizes were calculated using the Scherrer equation for the Fe-based catalysts precursor and these are listed in Table 2. The crystallite size for the Fe–Mn–K catalyst is typically around 14 nm, which is reflected in the observed broad reflections in the XRD spectrum of the catalyst precursor (as shown in Fig. 2).

Table 2 Crystallite sizes of prepared catalysts (with different transition metal promoters) with the citric acid method.

Surface elemental compositions and the oxidation states of the metals were analyzed using XPS in the region 0–800 eV. The survey spectrum (Fig. 2b) clearly indicates that the sample contains Fe, Mn, K, and O. Figure 2c shows the XPS spectrum of the Fe 2p region, which can be fitted with two spin-orbit doublets corresponding to the Fe 2p3/2 and Fe 2p1/2 peaks with a binding energy gap of 13.7 eV and a shakeup satellite which is assigned to Fe3+, consistent with those for Fe3O461. The measured molar ratio of Fe2+ : Fe3+ is 1:2.38, which approximates to the stoichiometry of Fe3O4 (the ratio of Fe2+:Fe3+ for Fe3O4 is 1:2). In Fig. 2d we show the Mn 2p XPS spectra, which displayed a spin-orbit doublet of Mn 2p3/2 and Mn 2p1/2 peaks with a binding energy gap of 11.6 eV can be assigned to Mn2O3. In addition, in Fig. 2e we show the O 1s, XPS spectra with a main peak at 529.4 eV, clearly originating from the presence of metal-O bonds.

The XPS spectra of the C 1s present (Fig. 2f) showed that around 40% of C sp2 at a characteristic binding energy peak of 284.7 eV; some 15% C=O at a binding energy peak of 288.4 eV; and finally, 45% C sp3 at binding energy peak of 285.3 eV. The C sp2 is due to the carbon residue due to the calcination of citric acid, and the peak of C=O and C sp3 can be attributed to the citric acid residues which have not fully decomposed.

Temperature-programmed oxidation (TPO) results of Fe–Mn–K catalyst precursor prepared with citric acid combustion method shown in Supplementary Fig. 24 revealed a small amount (about 3.5 wt%) of carbon residue in the after calcination at 350 °C. The presence of this small amount of carbon in the catalyst is reported to be beneficial for a higher olefin product selectivity. Thus, previous work62,63 reported that the surrounding carbonaceous matter could indeed facilitate the formation of iron carbides during activation, hence improving the higher liquid products selectivity.

Scanning electron microscopy (SEM) images of both the catalyst precursor and the used catalysts are shown in Fig. 3. The precursor consists of closely packed, regular particles (Fig. 3a). Obvious changes take place in the morphology of the catalyst after reaction (Fig. 3b). STEM-BF images of the catalyst precursor and used catalyst were also recorded as shown in Fig. 4.

Fig. 3: SEM images of Fe–Mn–K catalyst.

a The Fe–Mn–K catalyst precursor; b the used Fe–Mn–K catalyst.

Fig. 4: STEM-BF images of the Fe–Mn–K at different nanoscales.

ac The Fe–Mn–K catalyst precursor; df the used Fe–Mn–K catalyst.

From Fig. 4a–c it is evident that the catalyst precursor consists of nanoparticles with sizes of ~15 nm. Interestingly, there was no obvious change in catalyst particle size following the hydrogenation reaction (Fig. 4d). In the catalyst precursor (Fig. 4b, c), the measured lattice spacings of 0.25 and 0.3 nm correspond to the (311) and (220) planes of Fe3O4, respectively. In addition to the Fe3O4 phase (Fig. 4e), a χ-Fe5C2 phase was also observed in the used catalysts (Fig. 4f). This has been proposed as the source of the catalytically active sites for CO and/or CO2 hydrogenation to hydrocarbons, as previously reported54,55,56,57.

The effects of transition metal promoters

Manganese compounds are widely utilised as promoters in iron-based catalysts for FTS where the addition of Mn typically improves activity, increases the surface basicity and enhances the carburization of the catalyst64,65. In addition to Mn, Zn66,67 and Cu43,68 have also been used as promoters for Fe-based catalysts for FTS. Thus, Fe–Zn–K and Fe–Cu–K catalysts were also prepared by the same method as the Fe–Mn–K catalyst. The catalytic performance for CO2 hydrogenation using these different catalysts are shown in Fig. 1e, f.

The data in Fig. 1e show that even the iron-catalyst without promoter showed high activity for CO2 hydrogenation, as reflected in the high conversion values. However, from Fig. 1f we can see the methane selectivity was very high, and reached 32.2% while the liquid product selectivity was very low.

In contrast, the promoter-added catalysts, Fe–Zn–K, Fe–Cu–K, and Fe–Mn–K showed high CO2 conversion and high jet fuel range hydrocarbon selectivity. There was no significant difference between the performances of these three catalysts, but the Fe–Mn–K catalyst showed slightly better selectivity for jet fuels synthesis (47.8%) than catalysts of Fe–Cu–K (40.8%) and Fe–Zn–K (45.1%).

Effects of base-metal promoters

The impact of potassium (K) compounds on the performance of Fe-based catalysts for FTS has been studied extensively69,70. K is known to promote the formation of longer-chain hydrocarbons, the carburization of surface Fe, and the suppression of CH4 formation, all of which are advantageous for liquid hydrocarbon synthesis. In addition to K, various base metal compounds of Na have also been used as promoters for FTS catalysts71,72. Therefore, these base metals have also been tested as promoters for the catalytic hydrogenation of CO2 and their various catalytic performance are summarised in Fig. 1e, f.

It is clear from the data in Fig. 1e, that Na, K, and Cs-based promoters all show both high activity for CO2 hydrogenation and high selectivity for hydrocarbons in the jet fuel range. However, the Li promoted catalyst showed high selectivity for methane formation but not for long-chain hydrocarbons (Fig. 1f). There are no large differences in the catalytic performance between the catalysts Fe–Mn–K, Fe–Mn–Na, and Fe–Mn–Cs. However, the Fe–Mn–K catalyst showed higher C8–C16 selectivity (47.8%) than Fe–Mn–Na (44.4%) or Fe–Mn–Cs (44.0%).

Crystallite sizes calculated using the Scherrer equation for the different base metal promoted catalysts precursor are listed in Table 3. The catalysts have different crystallite sizes ranging from 19 to 32 nm.

Table 3 Crystallite size of the various prepared catalysts (different base metal) with citric acid method.

Effects of organic fuel compounds

Recently, the Organic-Combustion Method (OCM), also known as the Solution Combustion Method, has been developed to prepare highly active metal catalysts for a variety of processes73. In order to investigate the fundamental, underlying efforts of organic fuel compounds, the catalyst prepared without fuel also been synthesised. It is clear that the catalyst prepared without fuel showed lower catalytic activity (CO2 conversion of 28.6%) compared with the catalyst prepared with citric acid (CO2 conversion of 38.2%). In addition to using citric acid as a fuel in the OCM catalyst preparation, we have also investigated other organic chemicals as potential fuel sources. A series of catalysts of the Fe–Mn–K type were therefore prepared with different organic compounds in the catalyst preparation by the combustion route and their catalytic performances for the hydrogenation of CO2 are listed in Table 4.

Table 4 Effect of organic (fuel) compounds on CO2 hydrogenation catalyst performance. All reactions were conducted at 1 MPa, 300 °C, GHSV 2400 ml g−1 h−1 and H2:CO2 (3:1) on Fe–Mn–K catalyst.

It is clear, therefore, that compared to the catalyst prepared without an organic fuel, all the Fe–Mn-K catalysts prepared with organic compounds generally showed both higher CO2 conversion and higher jet fuel range hydrocarbon selectivity. The catalysts prepared with EDTA, citric acid, oxalic acid, NTA, DTPA, Tartaric acid, HEDTA, and salicylic acid also exhibited good catalytic performance for both CO2 conversion and jet fuel selectivity. In general, all these organic fuels could also act as chelating agents and hence facilitating the formation of nanostructured catalysts.

The XRD spectra of various catalysts are shown in Supplementary Fig. 4. The catalyst prepared without fuel showed characteristic reflections assigned to Fe2O3. However, most of the catalysts prepared with organic fuel compounds showed Fe3O4 as the dominant crystalline phase which clearly indicates that part of Fe3+ present in Fe2O3 was partially reduced to Fe2+ in Fe3O4 during the catalyst preparation stage. The catalyst prepared with oxalic acid showed XRD reflections corresponding to Fe2O3 instead of Fe3O4. This implies that under the conditions applied in this investigation, oxalic acid did not reduce the Fe2O3 to Fe3O4 consistent with its low reducing power compared to the other organic fuels.

The crystallite sizes of catalysts calculated from the Scherrer equation are listed in Table 5. Importantly, catalysts prepared with a range of different organic compounds showed smaller crystallite sizes than the catalyst prepared without fuel. We attribute these differences in crystallite sizes as the possible origins of the higher activity of catalysts prepared with organic fuels.

Table 5 Crystallite size of catalysts prepared with different organic compounds.

Compared to the co-precipitation method, widely applied in the preparation of Fe-based catalysts49,50,51,52, we show that the OCM is a particularly facile production process where, in addition to high yields and selectivity for jet fuels, additional advantages are savings in both energy and time74.

An optimal organic compound in our catalyst preparation should act both as a reducing agent and should react with nitrates non-violently, produce nontoxic gases and also act as an effective chelating agent for metal cations.

The catalysts prepared using organic fuels showed high activity as stable organic chelate compounds formed with metal cations are particularly suited to the formation of uniform, highly dispersed metal oxide catalysts via the combustion method.

The gaseous products from the organic compound and nitrate combustion reactions are N2, CO2, and H2O. Using citric acid as an example, the stoichiometric reactions can be described as follows, according to the principle of propellant chemistry:

$$54\;{\mathrm{Fe}}\left( {{\mathrm{NO}}_3} \right)_3\,9{\mathrm{H}}_2{\mathrm{O}} + 46\;{\mathrm{C}}_6{\mathrm{H}}_8{\mathrm{O}}_7\,{\mathrm{H}}_2{\mathrm{O}} \\ \quad\to 18\;{\mathrm{Fe}}_3{\mathrm{O}}_4 + 81\;{\mathrm{N}}_2 + 276\;{\mathrm{CO}}_2 + 716\;{\mathrm{H}}_2{\mathrm{O}}$$
$$9\;{\mathrm{Mn}}\left( {{\mathrm{NO}}_3} \right)_2\,4{\mathrm{H}}_2{\mathrm{O}} + 5\;{\mathrm{C}}_6{\mathrm{H}}_8{\mathrm{O}}_7{\mathrm{H}}_2{\mathrm{O}} \\ \to 9\;{\mathrm{MnO}} + 9\;{\mathrm{N}}_2 + 30\;{\mathrm{CO}}_2 + 61\;{\mathrm{H}}_2{\mathrm{O}}$$

These combustion reactions are highly exothermic and lead to a rapid evolution of a large volume of gaseous products during the catalysts preparation process. This release of gas depletes the fuel combustion heat and hence limits the rapid temperature rise, thereby advantageously reducing any premature local partial sintering of the primary metals oxides particles. The gas evolution also results in limiting any extended crystal growth or inter particle contact, thereby contributing to smaller particle size catalysts75.

Although combustion was nominally carried out at 350 °C, the in situ flame temperature during combustion can be very high due to the combustion of gases produced during the decomposition of metal nitrates and the organic compounds. This high-temperature persists for a few minutes and disappears, producing a rapid quenching effect76. which is known to enhance the interaction between Fe3O4 and the promoter, further improving catalytic performance. It is interesting that most of redox gel when combusted at a calcining temperature of 350 °C, produces Fe3O4 without any apparent O2 participation from the atmosphere However, the main products are Fe2O3 when the calcination temperature increased to 500 °C, one presumes clearly as a consequence of the participation of atmospheric oxygen and/or the associated oxygens from the complexing ligands.

In general, the Fe–Mn-K catalysts synthesised with carboxylic acids and polycarboxylic acids as fuels showed superior catalytic performances than those prepared using urea and sugar (glucose) and the catalyst prepared without fuel. Our assertion is that this trend probably derives from two crucial roles (i.e., both a chelating agent and fuel) that these organic molecules play in the organic-combustion approach. The first role can enhance the homogeneity of the solution through the intimacy between the constituent metal (Fe, Mn, K) precursors, hence hindering their precipitation or aggregation during the gel formation, whilst the second (fuel) function can closely control the severity of the combustion reaction and hence the aggregation of the nanostructured catalysts. Obviously, this leads to changes in the crystallite sizes that show the Fe–Mn–K catalysts with particle sizes between 7 and 28 nm and usually prepared by carboxylic acid-type fuels are significantly more active and selective than the catalysts with larger crystallite sizes (i.e., 56–74 nm).

Finally, we have also examined commercial sugar and flour powders as possible fuels in the catalyst preparation process. Catalysts prepared with these fuels also showed high CO2 hydrogenation activity and jet fuel range hydrocarbon selectivity. The catalytic performance for CO2 hydrogenation of catalysts prepared with different fuels are shown in Supplementary Figs. 1022.

The reaction scheme

Hägg carbide (χ-Fe5C2) is widely accepted to be the active catalytic species in the FTS and this iron carbide phase plays a crucial role in the C–C chain growth reactions54,55,56,57. The χ-Fe5C2 usually prepared by activation of hematite under syngas atmosphere at temperature of 200–450 °C, the whole activation process contains a three-step reduction process of Fe2O3 to iron (Fe2O3 → Fe3O4 → FeO → Fe) and then followed by carburisation of Fe to χ-Fe5C277. In our experiments, the χ-Fe5C2 was reduced and carburized from Fe3O4, in the process of magnetite (Fe3O4) → wüstite (FeO) → iron metal (Fe) → Hägg carbide (χ-Fe5C2). Wei et al.44 have proposed a comprehensive reaction scheme where χFe5C2 is involved in the hydrogenation of CO2 to gasoline fuel range hydrocarbons, using a Na-Fe3O4/Zeolite multifunctional catalyst. We believe that a related, but slightly different, reaction scheme is operating here for the hydrogenation of CO2 to aviation jet fuel and this is illustrated schematically in Fig. 5.

Fig. 5: Reaction scheme for CO2 hydrogenation to jet fuel range hydrocarbons.

The CO2 hydrogenation to jet fuel range hydrocarbons process through a Tandem Mechanism in which the Reverse-Water Gas Shift reaction (RWGS) and Fischer-Tropsch synthesis (FTS) reaction are catalysed by Fe3O4 and χ-Fe5C2 respectively.

In contrast to the report by Wei et al.44 who described catalysts prepared by a one-pot synthesised Na-Fe3O4 catalyst with zeolite, we have prepared catalysts using the direct OCM route which showed higher liquid products yield on CO2 hydrogenation. Thus the Fe3O4 catalyst precursor is fully carburized to χ-Fe5C2 during our catalyst activation (reduction) process, whilst Fe3O4 is partially regenerated from the oxidation of χ-Fe5C2 by CO2 /water in the first hours of the catalytic reaction. Jet fuel synthesis via CO2 hydrogenation initially takes place by the RWGS reaction (CO2 + H2 → CO + H2) on the catalytically active sites of Fe3O4, and subsequently by the FTS reactions (CO + H2 → CnHm + H2O) on catalytically active sites on χ-Fe5C254,55,56,57.

Using iron-based catalysts for FT synthesis a fast and reversible exchange of Fe3O4 to FexCy carbides and vice versa can occur under appropriate reaction conditions. This relatively facile and reversible phase transformation makes possible the incorporation of carbon atoms from the carbide surface into the reaction products via Mars-van Krevelen mechanism as was determined by Gracia et al.78 through a computational study of the CO hydrogenation on an iron carbide surface. Remarkably, this Mars-van Krevelen-like mechanism on supported Fe catalysts rationalised the enhanced reactivity of highly dispersed iron carbide particles in the initiation of chain growth in F-T synthesis79.

As far as we know, there is not a single report in the scientific literature of the Mars-van Krevelen mechanism operating in the CO2 hydrogenation reaction on Fe catalysts. Obviously, this reaction is more challenging than conventional FT synthesis since the catalyst must have an excellent balance of active sites (phases) to catalyse—in tandem mode—the reverse-water gas shift reaction (or CO2 partial hydrogenation) and also the CO hydrogenation via the FT reaction to produce Jet Fuel. Our tandem mechanism through the participation of Fe3O4 and χ-Fe5C2 can easily rationalise the jet fuel formation and give a wider picture of the evolution of the gas, liquid and solid phases during the catalytic reaction. Further work is needed to gain further insight into the possible occurrence of Mars-van Krevelen-like mechanism in the FT stage through carbon isotopic labelling studies. In a flowing gas system these will clearly be experimentally—and financially (!)—challenging.

The carbide phase detected by powder-XRD diffraction was χ-Fe5C2 which plays a principal role in the formation of hydrocarbons via FT reaction54,55,56,57. According to the literature and our own results, the carburization process of Fe nanoparticles during the catalytic reaction forms the Fe carbide phase, which through a FT pathway favours the C–C condensation reactions to produce large hydrocarbons within the range of aviation fuel. In our experiments, the χ-Fe5C2 was formed during the catalyst activation/reduction process, in the beginning of the reaction what it is happening is mainly CO2 methanation reaction on χ-Fe5C2, the relatively high pressure of water can then oxidize on χ-Fe5C2 to Fe3O4, and the Fe3O4 was simultaneously carburized by CO80. In model experiments, Fe2O3 was produced from the oxidation of Fe3O4 by CO2/H2O, and Fe2O3 was steadily reduced to Fe3O4 by H2 in the reaction system (Supplementary Fig. 23). Thus Fe3O4, χ-Fe5C2, and Fe2O3 co-exist during the reaction. Using Mn compounds as a promoter noticeably improved the catalyst FTS activity, increased the catalyst surface basicity and enhanced the carburization of the catalyst64,65. The addition of K compounds promoted the formation of longer-chain hydrocarbon molecules, the carburization of surface Fe, and the suppression of CH4 formation, which strongly favours liquid hydrocarbon synthesis69,70. We also find that the addition of both Mn and K as promoters improved the Fe-catalyst performance, directly converting CO2 into jet fuel range hydrocarbons with high efficiency.

Renewable jet fuels and the circular economy

The Circular Economy (CE) is an attractive, holistic concept gradually and steadily positioning itself as an alternative and reliable alternative to the present, “Business-as-Usual”, unsustainable Linear Economy (LE) based on the “Take, make and dispose” paradigm71. Nowadays, researchers have risen to the challenge of climate change and advanced the concept of the so-called “CO2 Circular Economy”, which directly integrates CO2 capture from the air (Direct Air Capture, DAC) and converts CO2 into value-added products81,82,83,84. This CO2 Circular Economy is a valid and highly powerful alternative route to simply burying huge volumes of captured CO2 underground and one in which future generations will surely expect us to have formed a major aspect of sustainable CO2 management.

Renewable jet fuels offer considerable potential in the worldwide drive for a future Sustainable Circular Economy Future for the aviation industry. The vision centres on CO2 conversion as an integral part of carbon recycling. The advances reported here offer a route out of the current, worldwide LE for jet fuels, based on the (present) Production-Consumption- Disposal/Emission structure, where the valuable natural resource, crude oil, is extracted, shipped across oceans, transformed into jet fuel and then combusted, with the combustion product either emitted into the atmosphere, or trapped and buried underground (through Carbon Capture and Storage). On the other hand, the CE approach is based on fundamentally—different Production—Consumption—Recycling/Recovery structure or Carbon Capture and Utilization, where, in this case, CO2 is indeed recognized as a powerful “Resource” to be recirculated using renewable energy to yield carbon-neutral jet aviation fuel.

Obviously, our advance can contribute significantly to more sustainable fuel production process if we input renewable energy into the chain for transforming CO2 into aviation jet fuel as an additional driving force for the inevitable and urgently required transition toward a circular fuel economy centred on renewable CO2 utilization.

Within a Jet Fuel CO2 Circular Economy, the “Goods” (here the Jet Fuel) are continually reprocessed in a closed environment, which saves the natural fossil resources and preserves the environment, whilst also, of course, creating significant numbers of new jobs, new economies and new markets.

In Fig. 6, we attempt to show a comparison of the Aviation Jet Fuel Linear Economy and the Aviation Jet Fuel Circular Economy. For the latter, Green H2 is derived from renewable energy, and CO2 is directly converted to Aviation Jet Fuel using our novel catalysts with CO2 captured from the atmosphere (“Air Capture”). Note the fundamental difference between the Jet Fuel Linear Economy, as compared to the CO2 to Jet Fuel Circular Economy, where the entire latter process is a closed loop and hence a CO2 neutral process. This CO2 Circular Economy for aviation can surely empower worldwide momentum toward not only major economic development for countries but also achieving the UN’s sustainable development goals.

Fig. 6

llustrating the differences between (a) an Aviation Jet Fuel Linear Economy and (b) an Aviation Jet Fuel Circular Economy.


A series of Fe-based catalysts were prepared by the OCM for the conversion of carbon dioxide into jet fuel range hydrocarbons. This synthetic process can be used to produce homogeneous, ultrafine and high-purity crystalline metal oxide powder catalysts. The as-prepared catalysts, following activation, showed high carbon dioxide hydrogenation activity and high jet fuel range selectivity as a consequence of the small (ca. 15 nm) nanoparticle size and the presence of two catalytically active Fe phases that operate in tandem. The first phase corresponds to Fe3O4 which catalyses the conversion of carbon dioxide to CO via the RWGS reaction whilst the second active Fe phase (χ-Fe5C2) catalyses the hydrogenation of CO through the Fischer-Tropsch process.

This catalytic process provides an attractive route not only to mitigate carbon dioxide emissions but also to produce renewable and sustainable jet fuel. The recycling of carbon dioxide as a carbon source for both fuels and high-value chemicals offers considerable potential for both the aviation and petrochemical industries. It also represents a significant social advance; thus, instead of consuming fossil crude oil, jet aviation fuels and petrochemical starting compounds are produced from a valuable and renewable raw material, namely, carbon dioxide. These advances highlight carbon dioxide recycling and resource conservation as an important, pivotal aspect of greenhouse gas management and sustainable development. This, then, is the vision for the route to achieving net-zero carbon emissions from aviation; a fulcrum of a future global zero-carbon aviation sector.


Catalyst preparation

Catalysts were prepared by the OCM method; citric acid was used as the organic compound. Typically, a Fe–Mn–K catalyst was prepared from citric acid monohydrate (99%, Sigma-Aldrich), Iron (III) Nitrate nonahydrate (98%, Sigma-Aldrich), Manganese(II) nitrate tetrahydrate (97%, Sigma-Aldrich) and potassium nitrate (99%, Sigma-Aldrich), in a molar ratio of citric acid: (Fe(or Co) + Mn + K) = 2, and a weight ratio of (Fe- and Mn- and K-precursors + citric acid)/water = 2:1. This initial mixture was stirred to form a homogeneous aqueous solution and heated at 50 °C for 1–2 h to obtain a citric acid-based slurry. This paste was then ignited at 350 °C in the air for 4 h to produce a carbon-free powder.

Catalyst samples with different first-row transition metal (Mn, Cu, Zn) promoters were also prepared using the same method; Fe–Cu–K and Fe–Zn–K catalysts were prepared using copper (II) nitrate trihydrate (99–104%, Sigma-Aldrich), and zinc nitrate hexahydrate (98%, Sigma-Aldrich) as transition metal precursors respectively. Similarly, catalysts with different Fe–Mn–Li, Fe–Mn–Na, and Fe–Mn–Cs base metal promoters were prepared using lithium carbonate (99%, Sigma-Aldrich), sodium carbonate (99.6%, Acros Organics) and cesium carbonate (99%, Sigma-Aldrich), respectively. Typically, the molar ratio of Fe: transit metal: base metal used was 10:1:1.

Fe–Mn-K catalysts were also prepared using other organic compounds other than citric acid, specifically; urea (Bio-Reagent, Sigma-Aldrich), tannic acid (ACS reagent, Sigma-Aldrich), Ethylenediamine Tetraacetic Acid (EDTA, 99.5%, Fisher Scientific), oxalic acid (99.0%, Sigma-Aldrich), Nitrilotriacetic acid (NTA, 99%, Sigma-Aldrich), Diethylenetriaminepentaacetic acid (DTPA, 98%, Sigma-Aldrich), tartaric acid (99.5%, Sigma-Aldrich), N-(2-Hydroxyethyl) ethylenediamine-N,N’,N’-triacetic acid (HEDTA,98%, Sigma-Aldrich), salicylic acid (99.0%, Sigma-Aldrich). In all discussions catalysts were prepared with citric acid as the organic compound unless otherwise stated.

Catalysts performance evaluation

CO2 hydrogenation experiments were carried out in a stainless steel fixed bed reactor with an inner diameter of 1.0 cm (Zhixiang Blue Evaluation Equipment Technology) with a typical 2.0 g catalyst load. Prior to the reaction, the catalyst was in situ reduced with syngas (H2:CO = 2:1) at atmospheric pressure, with a GHSV (gas hourly space velocity) of 1000 mL g−1 h−1, at 320 °C for 24 h. Following reactor cooling to below 50 °C, a mixture of gas with an H2/CO2 ratio of 3 and N2 (as an internal standard gas) was introduced at a gas flow of 40 mL min−1 (GSVH = 2400 mL g−1 h−1). The reactor was then heated at a rate of 2 °C/min to 300 °C. The reaction pressure was fixed at 10 bar (1 MPa) using a back pressure regulator. The effluent gaseous products were analysed using an online Gas Chromatograph (Perkin Elmer Clarus 580 GC) with flame ionization (FID) and thermal conductivity detectors (TCD), and the collected liquid products were analysed by Gas Chromatograph Mass Spectrometry (SHIMADZU GCMS-QP2010 SE).

The CO2 and H2 conversion and product selectivity’s were calculated from the following relationships:

$${\mathrm{CO}}_2\;{\mathrm{conversion}} = \frac{{{\mathrm{CO}}_{2,\;{\mathrm{inlet}}} - \frac{{{\mathrm{N}}_{2\;inlet}}}{{{\mathrm{N}}_{2\;outlet}}} \times {\mathrm{CO}}_{2,\;{\mathrm{outlet}}}}}{{{\mathrm{CO}}_{2,\;{\mathrm{inlet}}}}} \times 100\%$$
$${\mathrm{H}}_2\;{\mathrm{conversion}} = \frac{{{\mathrm{H}}_{2\;inlet} - \frac{{{\mathrm{N}}_{2\;inlet}}}{{{\mathrm{N}}_{2\;outlet}}} \times {\mathrm{H}}_{2\;outlet}}}{{{\mathrm{H}}_{2\;inlet}}} \times 100\%$$
$${\mathrm{CO}}\;{\mathrm{yield}} = \frac{{\frac{{{\mathrm{N}}_{2\;inlet}}}{{{\mathrm{N}}_{2\;outlet}}} \times {\mathrm{CO}}_{{\mathrm{outlet}}}}}{{{\mathrm{CO}}_{2,\;{\mathrm{inlet}}}}} \times 100\%$$
$${\mathrm{CO}}\;{\mathrm{selectivity}} = \frac{{{\mathrm{CO}}\;{\mathrm{yield}}}}{{{\mathrm{CO}}_2\;{\mathrm{conversion}}}} \times 100\%$$
$${\mathrm{C}}_{\mathrm{n}}{\mathrm{H}}_{\mathrm{m}}\;{\mathrm{yield}} = \frac{{{\mathrm{n}} \times \frac{{{\mathrm{N}}_{2\;inlet}}}{{{\mathrm{N}}_{2\;outlet}}} \times {\mathrm{C}}_{\mathrm{n}}{\mathrm{H}}_{\mathrm{m}}{\mathrm{outlet}}}}{{{\mathrm{CO}}_{2,\;{\mathrm{inlet}}}}} \times 100\% \;\left( {{\mathrm{n}} = 1,2,3,4} \right)$$
$${\mathrm{C}}_{5 + }\;{\mathrm{yield}} = \left({\mathrm{CO}}_2\;{\mathrm{conversion}} - {\mathrm{CO}}\;{\mathrm{yield}} - \mathop {\sum}\limits_{n = 1}^4 {{\mathrm{C}}_{\mathrm{n}}{\mathrm{H}}_{\mathrm{m}}\;{\mathrm{yield}}} \right) \times 100\%$$
$${\mathrm{selectivity}}\;{\mathrm{in}}\;{\mathrm{hydrocarbons}} = \frac{{{\mathrm{C}}_{\mathrm{n}}{\mathrm{H}}_{\mathrm{m}}\;{\mathrm{yield}}}}{{{\mathrm{CO}}_2\;{\mathrm{conversion}} \times \left( {1 - {\mathrm{CO}}\;{\mathrm{selectivity}}} \right)}} \times 100\%$$

The selectivity of oxygenates (mainly alcohols) was not further considered in this study as it was below 1.0%.

Catalyst characterization

Powder XRD analyses of catalysts used a Cu Kα (0.15418 nm) X-ray source (25 kV, 40 mA) in a Bruker D8 Advance diffractometer. Diffraction patterns were recorded over a 10–80° 2θ angular range using a step size of 0.02°.

X-ray photoelectron spectroscopy (XPS) of samples was performed using a Thermo Fisher Scientific Nexsa spectrometer. Samples were analysed using a micro-focused monochromatic Al X-ray source (72 W) over an area of ~400 × 200 µm2. Data were recorded at pass energies of 150 eV for survey scans and 40 eV for high-resolution scans with 1 and 0.1 eV step sizes respectively. Charge neutralisation was achieved using a combination of low energy electrons and argon ions. The resulting spectra were analyzed using Casa XPS peak fitting software and sample charging corrected using the C 1s signal at 284.8 eV as a reference.

Thermogravimetric analysis (TGA) was used to characterise the resulting carbon depositions in our catalyst samples. A TPO was carried out to determine the thermal stability of the produced carbons. The sample was heated from room temperature to 1000 °C at a heating rate of 10 °C/min under an air atmosphere with a flow rate of 100 ml/min.

The catalyst morphology was characterised using scanning electron microscopy (SEM JEOL 840F) at an accelerating voltage of 6.0 kV.

High-resolution scanning transmission electron microscopy (STEM) annular dark field (ADF) and bright field (BF) images were obtained using a probe corrected JEOL ARM200F at the David Cockayne Centre for Electron Microscopy operated at 200 kV with ADF inner and outer detector angles of 28–104.36 mrad, respectively, a 13.20 mrad BF outer angle, and a 14 mrad convergence semi-angle.

Reporting summary

Further information on research design is available in the Nature Research Reporting Summary linked to this article.

Data availability

The authors declare that the main data supporting the findings of this study are contained within the paper and its associated Supplementary Information. All other relevant data are available from the corresponding author upon reasonable request.


  1. 1.

    Tian, H. et al. The terrestrial biosphere as a net source of greenhouse gases to the atmosphere. Nature 531, 225 (2016).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  2. 2.

    Bello, B. Captured CO2 to grow microalgae for bio-jet fuel production. (UKCCSC Winter School, University of Cambridge, Cambridge, UK, 2012).

  3. 3.

    Hari, T. K., Yaakob, Z. & Binitha, N. N. Aviation biofuel from renewable resources: routes, opportunities and challenges. Renew. Sust. Energ. Rev. 42, 1234–1244 (2015).

    Article  Google Scholar 

  4. 4.

    Kallio, P., Pásztor, A., Akhtar, M. K. & Jones, P. R. Renewable jet fuel. Curr. Opin. Biotechnol. 26, 50–55 (2014).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  5. 5.

    Liu, G., Yan, B. & Chen, G. Technical review on jet fuel production. Renew. Sust. Energ. Rev. 25, 59–70 (2013).

    CAS  Article  Google Scholar 

  6. 6.

    Gnanamani, M. K. et al. Hydrogenation of carbon dioxide over Co–Fe bimetallic catalysts. ACS Catal. 6, 913–927 (2016).

    CAS  Article  Google Scholar 

  7. 7.

    Jiang, Z., Xiao, T., Kuznetsov, V. á & Edwards, P. P. Turning carbon dioxide into fuel. Phil. Trans. R. Soc. A 368, 3343–3364 (2010).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  8. 8.

    Li, S. et al. Tuning the selectivity of catalytic carbon dioxide hydrogenation over iridium/cerium oxide catalysts with a strong metal–support interaction. Angew. Chem. Int. Ed. 56, 10761–10765 (2017).

    CAS  Article  Google Scholar 

  9. 9.

    Schneidewind, J., Adam, R., Baumann, W., Jackstell, R. & Beller, M. Low‐temperature hydrogenation of carbon dioxide to methanol with a homogeneous cobalt catalyst. Angew. Chem. Int. Ed. 56, 1890–1893 (2017).

    CAS  Article  Google Scholar 

  10. 10.

    Song, Q.-W., Zhou, Z.-H. & He, L.-N. Efficient, selective and sustainable catalysis of carbon dioxide. Green Chem. 19, 3707–3728 (2017).

    CAS  Article  Google Scholar 

  11. 11.

    Wang, W., Wang, S., Ma, X. & Gong, J. Recent advances in catalytic hydrogenation of carbon dioxide. Chem. Soc. Rev. 40, 3703–3727 (2011).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  12. 12.

    Yang, H. et al. A review of the catalytic hydrogenation of carbon dioxide into value-added hydrocarbons. Catal. Sci. Technol. 7, 4580–4598 (2017).

    CAS  Article  Google Scholar 

  13. 13.

    Zhang, X. et al. Product selectivity in plasmonic photocatalysis for carbon dioxide hydrogenation. Nat. Commun. 8, 14542 (2017).

    ADS  CAS  PubMed  PubMed Central  Article  Google Scholar 

  14. 14.

    Asadi, M. et al. Nanostructured transition metal dichalcogenide electrocatalysts for CO2 reduction in ionic liquid. Science 353, 467–470 (2016).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  15. 15.

    Buelens, L. C., Galvita, V. V., Poelman, H., Detavernier, C. & Marin, G. B. Super-dry reforming of methane intensifies CO2 utilization via Le Chatelier’s principle. Science 354, 449–452 (2016).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  16. 16.

    Choi, Y. H. et al. Carbon dioxide Fischer-Tropsch synthesis: A new path to carbon-neutral fuels. Appl. Catal. B 202, 605–610 (2017).

    CAS  Article  Google Scholar 

  17. 17.

    Kattel, S., Ramírez, P. J., Chen, J. G., Rodriguez, J. A. & Liu, P. Active sites for CO2 hydrogenation to methanol on Cu/ZnO catalysts. Science 355, 1296–1299 (2017).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  18. 18.

    Klankermayer, J. & Leitner, W. Love at second sight for CO2 and H2 in organic synthesis. Science 350, 629–630 (2015).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  19. 19.

    Mariano, R. G., McKelvey, K., White, H. S. & Kanan, M. W. Selective increase in CO2 electroreduction activity at grain-boundary surface terminations. Science 358, 1187–1192 (2017).

    ADS  CAS  PubMed  Article  PubMed Central  Google Scholar 

  20. 20.

    Satthawong, R., Koizumi, N., Song, C. & Prasassarakich, P. Bimetallic Fe–Co catalysts for CO2 hydrogenation to higher hydrocarbons. J. CO2 Util.J. CO2 Util. 3, 102–106 (2013).

    Article  CAS  Google Scholar 

  21. 21.

    Dowson, G. R. & Styring, P. Demonstration of CO2 conversion to synthetic transport fuel at flue gas concentrations. Front. Energy Res. 5, 26 (2017).

    Article  Google Scholar 

  22. 22.

    Michailos, S., McCord, S., Sick, V., Stokes, G. & Styring, P. Dimethyl ether synthesis via captured CO2 hydrogenation within the power to liquids concept: a techno-economic assessment. Energy Convers. Manag. 184, 262–276 (2019).

    CAS  Article  Google Scholar 

  23. 23.

    Vogt, C. et al. Understanding carbon dioxide activation and carbon–carbon coupling over nickel. Nat. Commun. 10, 5330 (2019).

    ADS  PubMed  PubMed Central  Article  Google Scholar 

  24. 24.

    Wang, L. et al. Silica accelerates the selective hydrogenation of CO2 to methanol on cobalt catalysts. Nat. Commun. 11, 1033 (2020).

    ADS  CAS  PubMed  PubMed Central  Article  Google Scholar 

  25. 25.

    Chen, L., Zhang, L., Xia, S. & Sun, F. Entropy generation minimization for CO2 hydrogenation to light olefins. Energy 147, 187–196 (2018).

    CAS  Article  Google Scholar 

  26. 26.

    Hu, B. et al. Selective hydrogenation of CO2 and CO to useful light olefins over octahedral molecular sieve manganese oxide supported iron catalysts. Appl. Catal. B 132, 54–61 (2013).

    Article  CAS  Google Scholar 

  27. 27.

    Hu, S. et al. Hydrothermally stable MOFs for CO2 hydrogenation over iron-based catalyst to light olefins. J. CO2 Util. 15, 89–95 (2016).

    CAS  Article  Google Scholar 

  28. 28.

    Liang, B. et al. Mn decorated Na/Fe catalysts for CO2 hydrogenation to light olefins. Catal. Sci. Technol. 9, 456–464 (2019).

    CAS  Article  Google Scholar 

  29. 29.

    Zhang, J. et al. Selective formation of light olefins from CO2 hydrogenation over Fe–Zn–K catalysts. J. CO2 Util. 12, 95–100 (2015).

    Article  CAS  Google Scholar 

  30. 30.

    Boutin, E. et al. Aqueous Electrochemical Reduction of Carbon Dioxide and Carbon Monoxide into Methanol with Cobalt Phthalocyanine. Angew. Chem. Int. Ed. (2019).

  31. 31.

    Gusain, R., Kumar, P., Sharma, O. P., Jain, S. L. & Khatri, O. P. Reduced graphene oxide–CuO nanocomposites for photocatalytic conversion of CO2 into methanol under visible light irradiation. Appl. Catal. B 181, 352–362 (2016).

    CAS  Article  Google Scholar 

  32. 32.

    Kothandaraman, J., Goeppert, A., Czaun, M., Olah, G. A. & Prakash, G. S. Conversion of CO2 from air into methanol using a polyamine and a homogeneous ruthenium catalyst. J. Am. Chem. Soc. 138, 778–781 (2016).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  33. 33.

    Frontera, P., Macario, A., Ferraro, M. & Antonucci, P. Supported catalysts for CO2 methanation: a review. Catalysts 7, 59 (2017).

    Article  CAS  Google Scholar 

  34. 34.

    Wang, F. et al. Active site dependent reaction mechanism over Ru/CeO2 catalyst toward CO2 methanation. J. Am. Chem. Soc. 138, 6298–6305 (2016).

    CAS  PubMed  PubMed Central  Article  Google Scholar 

  35. 35.

    Xu, J. et al. Influence of pretreatment temperature on catalytic performance of rutile TiO2-supported ruthenium catalyst in CO2 methanation. J. Catal. 333, 227–237 (2016).

    CAS  Article  Google Scholar 

  36. 36.

    Liu, B. et al. Novel sour water gas shift catalyst (SWGS) for lean steam to gas ratio applications. Fuel Process. Technol. 134, 65–72 (2015).

    CAS  Article  Google Scholar 

  37. 37.

    Upadhye, A. A. et al. Plasmon-enhanced reverse water gas shift reaction over oxide supported Au catalysts. Catal. Sci. Technol. 5, 2590–2601 (2015).

    CAS  Article  Google Scholar 

  38. 38.

    Bahruji, H. et al. Hydrogenation of CO2 to dimethyl ether over Brønsted acidic PdZn catalysts. Ind. Eng. Chem. Res. 57, 6821–6829 (2018).

    CAS  Article  Google Scholar 

  39. 39.

    Birdja, Y. Y. et al. Advances and challenges in understanding the electrocatalytic conversion of carbon dioxide to fuels. Nat. Energy 4, 732–745 (2019).

  40. 40.

    Xia, C. et al. Continuous production of pure liquid fuel solutions via electrocatalytic CO2 reduction using solid-electrolyte devices. Nat. Energy 4, 1–10 (2019).

  41. 41.

    Ye, R.-P. et al. CO2 hydrogenation to high-value products via heterogeneous catalysis. Nat. Commun. 10, 5698 (2019).

    ADS  CAS  PubMed  PubMed Central  Article  Google Scholar 

  42. 42.

    Gao, P. et al. Direct conversion of CO2 into liquid fuels with high selectivity over a bifunctional catalyst. Nat. Chem. 9, 1019 (2017).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  43. 43.

    Wang, W., Jiang, X., Wang, X. & Song, C. Fe–Cu bimetallic catalysts for selective CO2 hydrogenation to olefin-rich C2+ hydrocarbons. Ind. Eng. Chem. Res. 57, 4535–4542 (2018).

    CAS  Article  Google Scholar 

  44. 44.

    Wei, J. et al. Directly converting CO2 into a gasoline fuel. Nat. commun. 8, 15174 (2017).

    ADS  PubMed  PubMed Central  Article  Google Scholar 

  45. 45.

    Yao, B. et al. Thermodynamic study of hydrocarbon synthesis from carbon dioxide and hydrogen. Greenhouse Gas. Sci. Technol 7, 942–957 (2017).

    CAS  Article  Google Scholar 

  46. 46.

    Marlin, D. S., Sarron, E. & Sigurbjörnsson, Ó. Process advantages of direct CO2 to methanol synthesis. Front. Chem. 6, 446 (2018).

    ADS  CAS  PubMed  PubMed Central  Article  Google Scholar 

  47. 47.

    Vogt, C., Monai, M., Kramer, G. J. & Weckhuysen, B. M. The renaissance of the Sabatier reaction and its applications on Earth and in space. Nat. Catal. 2, 188–197 (2019).

    CAS  Article  Google Scholar 

  48. 48.

    Xiao, T. et al. The Catalyst Selectivity Index (CSI): a framework and metric to assess the impact of catalyst efficiency enhancements upon energy and CO2 footprints. Top. Catal. 58, 682–695 (2015).

    CAS  Article  Google Scholar 

  49. 49.

    Alayat, A., Mcllroy, D. & McDonald, A. G. Effect of synthesis and activation methods on the catalytic properties of silica nanospring (NS)-supported iron catalyst for Fischer-Tropsch synthesis. Fuel Process. Technol. 169, 132–141 (2018).

    CAS  Article  Google Scholar 

  50. 50.

    Beasley, C., Gnanamani, M. K., Hamdeh, H. H., Martinelli, M. & Davis, B. H. Effect of gallium additions on reduction, carburization and Fischer–Tropsch activity of iron catalysts. Catal. Lett. 148, 1920–1928 (2018).

    CAS  Article  Google Scholar 

  51. 51.

    Ding, M. et al. Study on reduction and carburization behaviors of iron phases for iron-based Fischer–Tropsch synthesis catalyst. Appl. Energy 160, 982–989 (2015).

    CAS  Article  Google Scholar 

  52. 52.

    Mirzaei, A. A., Sarani, R., Azizi, H. R., Vahid, S. & Torshizi, H. O. Kinetics modeling of Fischer–Tropsch synthesis on the unsupported Fe-Co-Ni (ternary) catalyst prepared using co-precipitation procedure. Fuel 140, 701–710 (2015).

    CAS  Article  Google Scholar 

  53. 53.

    Nakhaei Pour, A., Khodabandeh, H., Izadyar, M. & Housaindokht, M. R. Mechanistic double ASF product distribution study of Fischer–Tropsch synthesis on precipitated iron catalyst. J. Nat. Gas Sci. Eng. 15, 53–58 (2013).

    CAS  Article  Google Scholar 

  54. 54.

    Yang, C., Zhao, H., Hou, Y. & Ma, D. Fe5C2 nanoparticles: a facile bromide-induced synthesis and as an active phase for Fischer–Tropsch synthesis. J. Am. Chem. Soc. 134, 15814–15821 (2012).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  55. 55.

    Liu, B. et al. Unravelling the new roles of Na and Mn promoter in CO2 hydrogenation over Fe3O4-based catalysts for enhanced selectivity to light α-olefins. ChemCatChem 10, 4718–4732 (2018).

    CAS  Article  Google Scholar 

  56. 56.

    Liu, J. et al. Direct transformation of carbon dioxide to value-added hydrocarbons by physical mixtures of Fe5C2 and K-modified Al2O3. Ind. Eng. Chem. Res. 57, 9120–9126 (2018).

    CAS  Article  Google Scholar 

  57. 57.

    Zhai, P. et al. Highly tunable selectivity for syngas-derived alkenes over zinc and sodium-modulated Fe5C2 catalyst. Angew. Chem. Int. Ed. 55, 9902–9907 (2016).

    CAS  Article  Google Scholar 

  58. 58.

    Liang, B. et al. Effect of Na promoter on Fe-based catalyst for CO2 hydrogenation to alkenes. ACS Sustain. Chem. Eng. 7, 925–932 (2018).

    Article  CAS  Google Scholar 

  59. 59.

    Ronda-Lloret, M., Rothenberg, G. & Shiju, N. R. A critical look at direct catalytic hydrogenation of carbon dioxide to olefins. ChemSusChem 12, 3896–3914 (2019).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  60. 60.

    Wang, S. et al. Iron–potassium on single-walled carbon nanotubes as efficient catalyst for CO2 hydrogenation to heavy olefins. ACS Catal. 10, 6389–6401 (2020).

  61. 61.

    Wilson, D. & Langell, M. XPS analysis of oleylamine/oleic acid capped Fe3O4 nanoparticles as a function of temperature. Appl. Surf. Sci. 303, 6–13 (2014).

    ADS  CAS  Article  Google Scholar 

  62. 62.

    Bahome, M. C., Jewell, L. L., Hildebrandt, D., Glasser, D. & Coville, N. J. Fischer–Tropsch synthesis over iron catalysts supported on carbon nanotubes. Appl. Catal., A 287, 60–67 (2005).

    CAS  Article  Google Scholar 

  63. 63.

    Lu, Y. et al. Fischer–Tropsch synthesis of olefin-rich liquid hydrocarbons from biomass-derived syngas over carbon-encapsulated iron carbide/iron nanoparticles catalyst. Fuel 193, 369–384 (2017).

    CAS  Article  Google Scholar 

  64. 64.

    Han, L., Wang, C., Zhao, G., Liu, Y. & Lu, Y. Microstructured Al-fiber@ meso-Al2O3@ Fe-Mn-K Fischer–Tropsch catalyst for lower olefins. AIChE J. 62, 742–752 (2016).

    CAS  Article  Google Scholar 

  65. 65.

    Li, T. et al. Effect of manganese on an iron-based Fischer–Tropsch synthesis catalyst prepared from ferrous sulfate. Fuel 86, 921–928 (2007).

    CAS  Article  Google Scholar 

  66. 66.

    Gao, X. et al. Effects of zinc on Fe-based catalysts during the synthesis of light olefins from the Fischer-Tropsch process. Chinese J. Catal. 37, 510–516 (2016).

    CAS  Article  Google Scholar 

  67. 67.

    Yang, S. et al. Linear α-olefin production with Na-promoted Fe–Zn catalysts via Fischer–Tropsch synthesis. RSC Adv. 9, 14176–14187 (2019).

    CAS  Article  Google Scholar 

  68. 68.

    Chernavskii, P. A. et al. Influence of copper and potassium on the structure and carbidisation of supported iron catalysts for Fischer–Tropsch synthesis. Catal. Sci. Technol. 7, 2325–2334 (2017).

    CAS  Article  Google Scholar 

  69. 69.

    Lohitharn, N. & Goodwin, J. G. Jr Effect of K promotion of Fe and FeMn Fischer–Tropsch synthesis catalysts: analysis at the site level using SSITKA. J. Catal. 260, 7–16 (2008).

    CAS  Article  Google Scholar 

  70. 70.

    Yang, Y., Xiang, H.-W., Xu, Y.-Y., Bai, L. & Li, Y.-W. Effect of potassium promoter on precipitated iron-manganese catalyst for Fischer–Tropsch synthesis. Appl. Catal., A 266, 181–194 (2004).

    CAS  Article  Google Scholar 

  71. 71.

    An, X. et al. Comparative study of iron-based Fischer–Tropsch synthesis catalyst promoted with potassium or sodium. Catal. Commun. 8, 1957–1962 (2007).

    CAS  Article  Google Scholar 

  72. 72.

    Wu, X. et al. Li-decorated Fe-Mn nanocatalyst for high-temperature Fischer–Tropsch synthesis of light olefins. Fuel 257, 116101 (2019).

    CAS  Article  Google Scholar 

  73. 73.

    González-Cortés, S. L. & Imbert, F. E. Fundamentals, properties and applications of solid catalysts prepared by solution combustion synthesis (SCS). Appl. Catal., A 452, 117–131 (2013).

    Article  CAS  Google Scholar 

  74. 74.

    Toniolo, J. C., Lima, M. D., Takimi, A. S. & Bergmann, C. P. Synthesis of alumina powders by the glycine–nitrate combustion process. Mater. Res. Bull. 40, 561–571 (2005).

    CAS  Article  Google Scholar 

  75. 75.

    Purohit, R., Sharma, B., Pillai, K. & Tyagi, A. Ultrafine ceria powders via glycine-nitrate combustion. Mater. Res. Bull. 36, 2711–2721 (2001).

    CAS  Article  Google Scholar 

  76. 76.

    Zhang, Z. et al. Synthesis and catalytic properties of Ce0.6Zr0.4O2 solid solutions in the oxidation of soluble organic fraction from diesel engines. Appl. Catal. B 76, 335–347 (2007).

    CAS  Article  Google Scholar 

  77. 77.

    Park, H. et al. Selective formation of Hägg iron carbide with g–C3N4 as a sacrificial support for highly active Fischer–Tropsch synthesis. ChemCatChem 7, 3488–3494 (2015).

    CAS  Article  Google Scholar 

  78. 78.

    Gracia, J. M., Prinsloo, F. F. & Niemantsverdriet, J. W. Mars-van Krevelen-like mechanism of CO hydrogenation on an iron carbide surface. Catal. Lett. 133, 257 (2009).

    CAS  Article  Google Scholar 

  79. 79.

    Ordomsky, V., Legras, B., Cheng, K., Paul, S. & Khodakov, A. The role of carbon atoms of supported iron carbides in Fischer–Tropsch synthesis. Catal. Sci. Technol. 5, 1433–1437 (2015).

    CAS  Article  Google Scholar 

  80. 80.

    Kirchner, J., Baysal, Z. & Kureti, S. Activity and structural changes of Fe‐based catalysts during CO2 hydrogenation towards CH4–a mini review. ChemCatChem 12, 981–988 (2020).

    CAS  Article  Google Scholar 

  81. 81.

    Goeppert, A., Czaun, M., Jones, J.-P., Prakash, G. S. & Olah, G. A. Recycling of carbon dioxide to methanol and derived products–closing the loop. Chem. Soc. Rev. 43, 7995–8048 (2014).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  82. 82.

    Nocito, F. & Dibenedetto, A. Atmospheric CO2 mitigation technologies: carbon capture utilization and storage. Curr. Opin. Green Sustain. Chem. 21, 34–43 (2020).

    Article  Google Scholar 

  83. 83.

    Ampelli, C., Perathoner, S. & Centi, G. CO2 utilization: an enabling element to move to a resource-and energy-efficient chemical and fuel production. Phil. Trans. R. Soc. A 373, 20140177 (2015).

    ADS  PubMed  Article  CAS  PubMed Central  Google Scholar 

  84. 84.

    Falcinelli, S. Fuel production from waste CO2 using renewable energies. Catal. Today 348, 95–101 (2020).

    CAS  Article  Google Scholar 

  85. 85.

    Wei, J. et al. New insights into the effect of sodium on Fe3O4-based nanocatalysts for CO2 hydrogenation to light olefins. Catal. Sci. Technol. 6, 4786–4793 (2016).

    CAS  Article  Google Scholar 

  86. 86.

    Wei, J. et al. Catalytic hydrogenation of CO2 to isoparaffins over Fe-based multifunctional catalysts. ACS Catal. 8, 9958–9967 (2018).

    CAS  Article  Google Scholar 

  87. 87.

    Albrecht, M. et al. Unexpectedly efficient CO2 hydrogenation to higher hydrocarbons over non-doped Fe2O3. Appl. Catal. B 204, 119–126 (2017).

    CAS  Article  Google Scholar 

  88. 88.

    He, Z. et al. Synthesis of liquid fuel via direct hydrogenation of CO2. Proc. Natl Acad. Sci. USA 116, 12654–12659 (2019).

    CAS  PubMed  Article  PubMed Central  Google Scholar 

  89. 89.

    Fujiwara, M., Kieffer, R., Ando, H. & Souma, Y. Development of composite catalysts made of Cu-Zn-Cr oxide/zeolite for the hydrogenation of carbon dioxide. Appl. Catal., A 121, 113–124 (1995).

    CAS  Article  Google Scholar 

  90. 90.

    Wang, X. et al. Synthesis of isoalkanes over a core (Fe–Zn–Zr)–shell (zeolite) catalyst by CO2 hydrogenation. Chem. Commun. 52, 7352–7355 (2016).

    CAS  Article  Google Scholar 

Download references


The authors thank EPSRC (Grant EP/N009924/1), Rolls-Royce and KACST, Saudi Arabia for financial support and encouragement. EPSRC grant code, EP/K040375/1, for the South of England Analytical Electron Microscope. XPS data collection was performed at the EPSRC National Facility for XPS (‘HarwellXPS’), operated by Cardiff University and UCL, under contract No. PR16195.

Author information




B.Y. wrote the manuscript with input from all the authors. B.Y., T.X., and P.P.E. conceived this study. B.Y. designed the experiments, performed the catalysts synthesis, catalysts evaluation, and X-ray diffraction and data analysis. O.A.M performed the STEM, X.J. performed the TEM, S. G. performed the XPS. B.Y., T.X., O.A.M., X.J., S. G-C., S. G., A.I.K., J.R.D., H.A.A., S.M.A., P.J.D., G.P.O., J.M.T. and P.P.E. contributed to analysis and discussion on the data, revising the article for intellectual content. T.X. and P.P.E. supervised the research. We dedicate this contribution to the memory of Sir John Meurig Thomas, FRS.

Corresponding authors

Correspondence to Tiancun Xiao or Peter P. Edwards.

Ethics declarations

Competing interests

The authors (B.Y., T.X., and P.P.E.) have a patent application: Iron-manganese based catalyst, catalyst precursor and catalytic process, WO 2020/201749, B.Y., P.P.E., and T.X., related to this research. All other authors declare no competing interests.

Additional information

Peer review information Nature communications thanks Vitaly Ordomsky, and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Yao, B., Xiao, T., Makgae, O.A. et al. Transforming carbon dioxide into jet fuel using an organic combustion-synthesized Fe-Mn-K catalyst. Nat Commun 11, 6395 (2020).

Download citation


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing