Abstract
It has been a challenging topic and perpetual task to design and synthesize covalent macrocycles with characteristic self-assembling behaviors and excellent host-guest properties in supramolecular chemistry. Herein, we present a family of macrocyclic diphenylamine[n]arenes (DPA[n]s, n = 3–7) consisting of methyldiphenylamine units through a facile one-pot synthesis strategy. Unlike many other reported macrocyclic arenes, the resultant non-planar DPA[n]s feature intrinsic π-π stacking interactions, interesting self-assembling behaviors and ethene/ethyne capture properties. Specifically, strong multiple intermolecular edge-to-face aromatic interactions in DPA[3] have been systematically investigated both in solid and solution states. The intriguing findings on the intermolecular edge-to-face stacking interaction mode in the macrocycle would further highlight the importance of noncovalent π-π interaction in supramolecular self-assembly. This study will also shed light on the macrocyclic and supramolecular chemistry and, we expect, will provide a direction for design and synthesis of covalent macrocycles in this area.
Similar content being viewed by others
Introduction
Macrocycles represent one of the most intriguing molecular entities that have been playing an essential role in the establishment and development of supramolecular chemistry. Design and synthesis of macrocycles featuring characteristic host-guest properties and self-assembling behaviors are always one of the cutting-edge research topics in the supramolecular chemistry1,2,3,4,5. The development of macrocyclic host-guest system is not only very conducive to exploring, explaining and understanding the non-covalent interactions but also endows the macrocycles with more recognition functions6,7,8,9,10,11,12,13,14,15,16,17,18. Meanwhile, the self-assembly of macrocycles into higher-order nanostructures such as columns and channels has found wide applications in the fields of supramolecular delivery systems and porous materials19,20,21. Normally, the intermolecular H-bonding and π–π stacking (often parallel stacking) interactions are the main driving forces employed to create such channel type macrocycles (Fig. 1a). For example, several well-developed macrocycles including cyclic peptides22,23,24,25, phenylacetylene macrocycles26,27,28, metal-organic coordination macrocycles29,30,31, aromatic oligoamide macrocycles32,33,34, bis-urea macrocycles21,35, etc. feature channel type self-assembling behavior and have demonstrated potential applications for the artificial transmembrane ion channels, separation, gas storage, and catalyst36,37 (Fig. 1c). Therefore, it is of high interest to efficiently prepare macrocycles possessing characteristic self-assembling behaviors, excellent host-guest properties, as well as some intriguing intermolecular non-covalent interactions.
Macrocyclic arenes, as one kind of important macrocycles, have always attracted much attention mainly on account of their easy preparation, convenient functionalization, interesting host-guest interaction, and enormous potential application in varieties of functional materials1,2,3,4,5,38. The self-assembly of macrocyclic arenes into columns or channels is believed to be an efficient approach to implement their practical applications in supramolecular delivery systems and porous materials36,37. However, not all the reported macrocyclic arenes seem to be able to stack into columns or channels. For example, without post-modification, some representative macrocyclic arenes, such as calix[n]arenes, pillar[n]arenes, corona[n]arenes and so on, do not favor channel-type molecular packing mainly because of their non-planar structural conformation or the lack of the robust intermolecular non-covalent forces39. Thus, it is of great challenge to construct macrocyclic arenes exhibiting unconventional self-assembling behaviors, as well as distinct recognition functions.
Under above premise, we herein present a family of macrocyclic diphenylamine[n]arenes (DPA[n]s, n = 3–7) consisting of methyldiphenylamine units, with alternative methylene and nitrogen bridges (Fig. 2). The idea of deliberately choosing methyldiphenylamine as building block is based on the following considerations: (a) the electron rich nature of N-substituted diphenylamine ensures that the dynamic Friedel-Crafts (FC) alkylation reaction can only occur at the para position, which is useful for the macrocycle formation; (b) the macrocycles with methylene and nitrogen bridges will display the well-tuned cavity and intrinsic conformation, which may produce interesting solid-state packing motif and self-assembling behavior; (c) lone pairs on nitrogen can participate in resonance and increase the electron density of DPA[n]s and consequently enhance the binding affinity towards the guest molecules. Thus, in this study, a series of DPA[n]s (n = 3–7) were successfully constructed via one-pot condensation reaction. Interestingly, it is found that the resultant non-planar DPA[3] and DPA[4] could maintain a pseudo three-dimensional cavity, as well as intrinsic π–π stacking interactions and interestingly unconventional self-assembling behaviors. Particularly, ideally and strong multiple intermolecular edge-to-face aromatic interactions have been observed in the crystal of DPA[3] (Fig. 1b). Consequently, the robust edge-to-face aromatic interactions facilitate its columnar self-assembling behavior which is elucidated by the indefinite isodesmic model. Moreover, DPA[3] with a guest accessible channel has displayed hosting ability to capture the guests like ethene and ethyne gases, indicating its tremendous potential in gas separation and adsorption in the future. To the best of our knowledge, there are few macrocyclic arenes capable of self-assembling into columns via the purely intermolecular edge-to-face aromatic interactions. Beside, DPA[3] capable of hosting both ethene and ethyne gases, which is directly confirmed by X-ray crystallography in this work, also represents a very rare host material in the area of gas storage and separation.
Results
Synthesis and characterization of DPA[n]s (n = 3–7)
The synthetic route to DPA[n]s is depicted in Fig. 2. The synthetic strategy is very similar to that of the reported pillar[n]arenes and calix[4]pyrroles, where a FC alkylation reaction is applied. The substrate N-methyldiphenylamine containing nitrogen atom facilitates the FC alkylation reaction that proceeds at the para-position, which is useful for the macrocycle formation. The effects of catalyst, solvent, reaction time and temperature on the yield of the product have been thoroughly investigated, and the synthetic reaction conditions were optimized (Supplementary Fig. 1 and Table 1). It was found that the catalyst is a pacing factor for the successful synthesis of the macrocycle, and FeCl3•6H2O catalyst leads to a better reproducibility and higher yield formation of the macrocycles. Moreover, it also revealed that only condensation reaction in dichloromethane or 1,2-dichloroethane could afford the desired DPA[n]s, which might be linked to the reaction mechanism (e.g., the stability of the reaction intermediate) or the solubility of the product DPA[n]s. Finally, a series of DPA[n]s including DPA[3] (yield 20%), DPA[4] (yield 10%), DPA[5] (yield 1%), DPA[6] (yield 0.5%), and DPA[7] (yield 0.3%) were prepared when the reaction was carried out in dichloromethane at room temperature for 6 h (Supplementary Fig. 1). Notably, the yield of DPA[3] could be significantly improved to 55% upon increasing the reaction time to 12 h. Moreover, with the change of the solvent from dichloromethane to 1,2-dichloroethane, the yield of DPA[3] could be further improved to 75%, which might be ascribed to the template effect of the solvent. The substituent effect of N-substituted diphenylamine on the macrocycle formation was also surveyed. The FC alkylation reaction of substrates bearing benzyl and methyl acetate groups afforded DPA[3]-a and DPA[3]-b, respectively, which are the derivatives of DPA[3], in good yield (Supplementary Table 1). In contrast, the preliminary results demonstrated that triphenylamine derivatives were unable to form macrocyclic arenes on this condition (Supplementary Table 1) probably because of the competing Scholl reaction40. All DPA[n]s were fully characterized by 1H NMR, 13C NMR, and mass spectrometry (Supplementary Figs. 56–76). In particular, DPA[3], DPA[4], DPA[3]-a, and DPA[3]-b were unambiguously confirmed by X-ray crystallographic analysis.
Crystal structures of DPA[n]
Single crystals suitable for X-ray crystallographic analysis were obtained for DPA[3] and DPA[4] by slow diffusion of methanol into chloroform solution (Fig. 3). In this study, DPA[n]s have even-numbered unsubstituted arenes and adopt non-planar conformation. All arene rings were found to alternately twist with two set of bridge angle, where the angle of nitrogen bridge is bigger than that of methylene bridge, which obviously differed from pillar[n]arenes composed of alkoxy substituted arenes and sole methylene bridge38,41. Consequently, DPA[3] exhibited a pseudo cylindrical configuration with three-dimensional cavity, where six benzene rings aligned alternately perpendicular and parallel to the macrocycle plane (Fig. 3a, b). In contrast, DPA[4] curved and adopted a saddle-shape conformation in the solid state (Fig. 3c, d).
Similar to many macrocyclic arenes39,41, DPA[3] also possessed a racemic mixture of enantiomers in its single crystal (Fig. 3b) attributed to the different orientation of the Ar-rings coupled to their non-symmetrical substitution which is similar to what has been observed in pillar[n]arenes38 and cycloparaphenylene6. The column separation of the two enantiomers was not applicable because of their rapid racemization at ambient temperature. As a consequence, we calculated the rotation barriers of DPA[3] whose transition state structure was obtained by the synchronous transit-guided Quasi-Newton (STQN) method with the QST3 option42,43, and the calculation results confirmed that the rapid interconversion of DPA[3] enantiomers for the free enthalpy change as small as 1.23 kcal/mol (Supplementary Fig. 2). What is more, the variable-temperature 1H NMR experiment likewise suggested that DPA[3] underwent rapid racemization even at very low temperature, which is caused from the flipping motion of the Ar-rings44 (Supplementary Figs. 3 and 4). By contrast, no enantiomer was found in DPA[4] because of the existence of a symmetry center (Fig. 3d and Supplementary Fig. 50). Therefore, the incorporation of nitrogen atom brings a significant impact on the conformation, cavity, electron density and even chirality of DPA[n]s.
With regard to the crystal packing, both two molecules were aligned into hollow column with infinite array, though their structural conformations were non-planar. Figure 4a illustrates the front and back view of two layers of the crystal packing in the ab-plane of DPA[3]. DPA[3] was aligned in a hexagonal packing perpendicular to the a–b plane, thereinto each layer containing two enantiomers with 1:1 ratio aligned alternatively along the c axis. Correspondingly, DPA[4] displayed a square arrangement that is also perpendicular to the a-b plane (Fig. 4b). Notably, these two macrocycles can be stacked to form continuous channels similar to cyclic peptides, phenylacetylene macrocycles, metal-organic coordination macrocycle, aromatic oligoamide, bis-urea macrocycles, etc., while the two macrocycles featuring distinct intermolecular aromatic π–π interactions. More specifically, an ideal edge-to-face π–π stacking geometry in DPA[3] was observed with a centroid-to-centroid distance of ~5 Å (Figs. 3a and 4c). Instead, offset π–π stacking geometry dominated the packing in DPA[4] with a longer centroid-to-centroid distance of ~5.5 Å (Figs. 3c and 4d). In contrast, ordered and multiple intermolecular π–π stacking interaction was rarely observed in the conventional non-planar macrocyclic arenes, e.g., pillararenes38,41, calixarene45,46,47,48, and cycloparaphenylene6,49, since their non-planar molecular conformations do not favor the intermolecular packing.
At the same time, single crystals suitable for X-ray crystallographic analysis were also obtained for DPA[3]-a and DPA[3]-b by slow diffusion of methanol into chloroform solution (Supplementary Figs. 53–55). Interestingly, besides the skeleton similarities, the edge to face π–π stacking motif and columnar self-assembling behaviors are also observed in the crystal of DPA[3]-a and DPA[3]-b in spite of their different substituents on nitrogen atom compared with DPA[3]. This finding implied that such edge to face π–π stacking might be an inherent property of DPA[3] and its derivatives. Consequently, the robustly intrinsic edge to face π–π interactions are the primary driving force to induce the columnar self-assembly of non-planar DPA[3].
DFT calculation on DPA[n]
All attempts to grow single crystals for the other DPA[n]s (n = 5–7) homologous have been unsuccessful. So, a computational prediction of their conformations was performed at B3LYP/cc-pVDZ level, which implied that DPA[n]s displayed size-dependent conformations in the solid state (Supplementary Fig. 5). The calculated conformations of DPA[3] and DPA[4] were well consistent with the results obtained from their X-ray crystallographic analysis, indicating the chosen calculated method herein was appropriate and correct. The calculated molecular geometries of the high-order DPA[n]s (n = 5–7) revealed that the macrocycles became further distorted with the increase of their size. Besides, the calculated HOMO electron density on the nitrogen bridge is notably higher than that on the methylene bridge, indicating that the lone pairs on nitrogen could likely participate in resonance and increase the electron density of DPA[n]s (Supplementary Fig. 6).
For the purpose of better understanding the molecular packing, DFT calculation based on B97D3/cc-pVDZ level was carried out to compare the binding energies of both DPA[3] and DPA[4] dimer, wherein their experimental dimer observed from single crystal packing and a few theoretically predicted packing dimers were calculated and compared. The binding energies of the selected dimers for DPA[3] and DPA[4] were listed in Fig. 5, Supplementary Tables 2 and 3. It should be noted that the theoretically predicted dimerized structures showed much lower binding energies than that of the dimer observed in single crystal, which indicated that the experimental packing is more stable than the theoretically predicted packing arrangements. The large binding energies of the dimers suggest the robustly intrinsic π–π stacking interactions in DPA[3] and DPA[4], which would facilitate their columnar self-assembling behavior. Therefore, these systems can be regarded as self-assembled nanotubes, in which DPA[n] units are held together by the intrinsic π–π stacking interactions.
Aggregation behavior of DPA[n]s
π–π stacking interaction as one kind of important weak non-covalent interactions refers to specific intermolecular attraction involving the π orbitals of aromatic rings. It is well-known that π–π stacking interactions are of high importance to the stability of secondary structure in nucleic acid polymers such as DNA50. Stacking interactions are also one of the most widely used driving forces for the self-assembly in supramolecular chemistry51,52. Several π–π stacking geometric configurations including face-to-face parallel stacking, offset parallel stacking, T-shaped edge-to-face stacking, and tilted T-shaped edge-to-face stacking have been observed in the crystals of macrocyclic arenes53,54. Among them, the parallel-stacked geometry is the most common configuration that dominates in the self-assembly of most planar aromatic molecules and macrocycles such as aforementioned phenylacetylene macrocycles, metal-organic coordination macrocycles, aromatic oligoamides, etc. Comparatively, the pure edge-to-face stacking modes in the self-assembly of macrocycles have never been investigated. Actually, edge-to-face interaction is energetically attractive about 1.5 kcal/mol and it is the most stable aromatic stacking of π–π interaction between neutral molecules53,54. However, ideal edge-to-face aromatic interactions are disfavored in solution, which can only be observed in solid state and are sensitive to temperature due to the restricted internal mobility53,54. Therefore, there is a high demand for the design of molecule possessing intrinsic intermolecular edge-to-face aromatic interactions. In view of the aforementioned crystallographic analysis and DFT calculation results, we envision that DPA[3] with the ideal edge-to-face π–π stacking geometry (Fig. 4c) should exhibit different self-assembling behavior compared with DPA[4] that possessed the offset π–π stacking geometry (Fig. 4d). And these findings direct our focus to study their self-assembly mechanism and behavior in detail.
The π–π stacking interactions of aromatic molecules usually produce additional ring-current effects. Consequently, their 1H NMR spectra are sensitive to concentration change, and the stacking of aromatic molecules results in upfield shifts of the protons. Thus, concentration-dependent 1H NMR spectroscopy as a method of choice could be employed to determine the strength of the self-assembly (association constant K) of our system55,56,57. As expected, the aromatic chemical shifts of DPA[n]s were very dependent on their concentrations rather than temperature, leading to distinct upfield shifts with the increase of concentration (Fig. 6a, Supplementary Figs. 9 and 12). Considering the unique packing motif of DPA[n]s, we here choose the indefinite isodesmic model (the EK model), which assumes that the addition of a molecule to a stack occurs with the same equilibrium constant KE as other molecules55 (Fig. 6b). The constants KE in this model were obtained by using nonlinear least-squares fitting (Fig. 6b, Supplementary Figs. 10 and 13), and the KE value as high as 4.18 × 103 and 1.53 × 103 M−1 were determined for DPA[3] and DPA[4], respectively57. Remarkably, the association constants for both two DPA[n]s are much higher than those of stacked planar macrocycles50,56, implying the considerable driving force for self-assembly in this study. The different KE values of DPA[3] and DPA[4] are likely to be associated with their different π–π stacking geometries, i.e., the slightly bigger KE of DPA[3] can be attributed to the edge-to-face π–π interaction that is more stable than offset π–π interaction53,54.
The distribution of the mole fraction of each oligomer57 for both DPA[3] and DPA[4] is also determined and shown in Fig. 7. As illustrated, the great majority of oligomers is present in the form of monomer under low concentration (0.1 mM) for both macrocycles. With the increase of concentration, the mole fractions of the higher stacked species (n > 10) rise dramatically, indicating their concentration-dependent self-assembling behavior. Besides, the data also revealed that, under the same concentration, the fractions of the high-order oligomers in DPA[3] are significantly more than those of DPA[4], which is in accordance with their unequal constants KE and different π–π stacking geometries. Because of the exponential relationship between the mole fraction and KE, small changes in KE value could result in relatively large changes in the mole fraction. Thus, the above qualitative and quantitative analytics disclosed that the robustly intrinsic π–π interactions are the primary driving force to induce the columnar self-assembly of non-planar DPA[n]s, markedly different from the conventional non-planar macrocyclic arenes. And also multiple intermolecular edge-to-face aromatic interactions in a macrocycle have been systematically investigated, and demonstrated that such interactions can function as the main driving forces for the macrocycle self-assembly.
Their self-assembling behavior was further studied by scanning electron microscope (SEM), atomic force microscope (AFM), 2-D diffusion-ordered spectroscopy (DOSY) and dynamic light scattering (DLS) experiments. The aggregates of both macrocycles formed under low concentration (0.1 mM) displayed an irregular clumpy morphology visualized by SEM (Supplementary Fig. 33) and AFM (Supplementary Figs. 31 and 32). In contrast, long flexible nanorod with uniform morphology can be observed at high concentration (1.0 mM) (Fig. 8a, b) similar to those of the most reported columnar assembled macrocycles25,29,33. The DOSY experiments of various concentrations of DPA[3] and DPA[4] in CDCl3 indicated that the diffusion coefficients D values of DPA[3] and DPA[4] progressively decreased from 6.31 × 10−9 to 1.00 × 10−9 m2 s−1 and 7.94 × 10−9 to 2.00 × 10−9 m2 s−1, respectively, with the increase of the concentration from 1.0 mM to 100 mM (Supplementary Figs. 15–30). In addition, in the same concentration, D values of DPA[3] are smaller than those of DPA[4]. Since the rate of diffusion is inversely proportional to the hydrodynamic size, the increase of the hydrodynamic size of macrocycles with the increase of their concentrations might provide the further support for their self-assembling behaviors in the solution state. In addition, DLS data revealed that the hydrodynamic diameter of DPA[3] and DPA[4] increased gradually from 0.674 to 413 nm and 0.655 to 10.1 nm, respectively, with the increase of the macrocycles concentration from 0.001 to 1.00 mM in CHCl3 (Fig. 8c, d). Meanwhile, under the same concentration, the aggregates of DPA[3] displayed a relatively bigger hydrodynamic diameter than that of DPA[4]. Thus, all these data further supported the different concentration-dependent self-assembling behaviors of DPA[3] and DPA[4] in the solution state.
Host-guest properties of DPA[n]s
In view of the unique packing motif of DPA[3] with intrinsic edge-to-face π–π stacking interactions, well-defined cavity size in the solid state and accessible channels, we assume that DPA[3] could form host-guest complex with some guests containing π bonds such as ethene and ethyne. Notably, it has been very rare that the capture of ethene and ethyne by means of covalent macrocycles due to the lack of the binding sites58,59. As a consequence, the ethene and ethyne capture ability of DPA[3] was initially checked through thermogravimetric analysis (TGA). From the TGA curve of DPA[3] powder that was immersed in ethene atmosphere for 48 h, a ~4% weight loss was observed when temperature raised above 200 °C (Supplementary Fig. 35), while DPA[3] is stable under 400 °C (Supplementary Fig. 34). Similarly, the TGA curve of the ethyne-immersed DPA[3] powder exhibited about 3% weight loss when the temperature raised above 120 °C (Supplementary Fig. 36). The results implied that one DPA[3] may bind about one ethene or ethyne molecule, and resulting in the host-guest complex of DPA[3]⊃ethene and DPA[3]⊃ethyne. In addition, 1H NMR spectrum of the host-guest complexes exhibited the typical signal of ethene and ethyne proton at 5.40 and 1.91 ppm, respectively (Fig. 9a, b). The integration of the ethene and ethyne protons by NMR also supported the plausible gas capture ratio. What’s more, the NOESY spectra of the complexes revealed through-space NOEs between the internal aromatic proton (Hb) of DPA[3] and guest molecules’ protons of ethene and ethyne, while no through-space NOEs between the external methyl proton (Hd) and guest molecules’ proton was observed (Fig. 9c, d), which further implied that the guest molecules are likely to be absorbed in the cavity of macrocycle. Fortunately, we successfully obtained the single crystal of DPA[3]⊃ethene and DPA[3]⊃ethyne suitable for X-ray diffraction (Fig. 9e–h). From the single crystal, the ethene and ethyne molecule actually located in the cavity of DPA[3], which is in agreement with the NOESY results. However, the interaction between DPA[3] and guest molecules is uncertain because ethene and ethyne exhibit disorder in the crystal of DPA[3]⊃ethene and DPA[3]⊃ethyne. DFT calculations implied that DPA[3] favors binding to π-bonded ethene and ethyne rather than ethane which is a saturated hydrocarbon (Supplementary Fig. 39). In addition, 1H NMR investigations of host-guest complexes between DPA[3] and a series of small molecules indicated the existence of weak host-guest interaction between DPA[3] and alkenes and alkynes such as n-hexylene, n-hexyne, styrene and phenylacetylene (Supplementary Figs. 40–47). Thus, we infer that the formation of host-guest complex might be attributed to the weak CH-π or electrostatic interaction between DPA[3] and guest60,61,62. To the best of our knowledge, this is a very rare example to demonstrate that small covalent macrocycle is capable of hosting ethene and ethyne gas directly confirmed by X-ray crystallography63. It is likely that the inherent intermolecular edge-to-face aromatic interactions and unique channel type self-assembling behavior in DPA[3] are essential to facilitate the host-guest properties toward ethene and ethyne. The preliminary results also highlight that DPA[3] as porous material has potential applications of gas separation and adsorption in the future19,20.
Discussion
In summary, a series of non-planar DPA[n]s (n = 3–7) were successfully synthesized, and their structures and properties were well studied. Unlike many other reported macrocyclic arenes, the resultant non-planar DPA[n]s feature intrinsic π–π stacking interactions, interesting self-assembling behaviors and ethene/ethyne capture properties. Specifically, DPA[3] and DPA[4] could self-assemble into columns with well-defined channel on account of their robust π–π stacking interactions. Notably, strong multiple intermolecular edge-to-face aromatic interactions in DPA[3] have been systematically investigated both in solid and solution states. And the preliminary results also demonstrated that the edge-to-face aromatic interactions can function as the main driving force for the macrocycle self-assembly. Benefitting from the three-dimensional cavity, the inherent intermolecular edge-to-face aromatic interactions and columnar self-assembling behavior, the designed DPA[3] demonstrated its encapsulation toward ethene and ethyne molecules, thus implying its potential applications of gas separation and adsorption in the future. This study provides a direction for the design and self-assembly of functional non-planar macrocyclic arenes. Our work also sheds light on the fundamental mechanism of multiple intermolecular edge-to-face π–π stacking in macrocycles, that helps to better understand the importance of π–π stacking interaction in supramolecular self-assembly.
Methods
All solvents were dried according to the standard procedures and all of them were degassed under N2 for 30 min before use. All air-sensitive reactions were carried out under inert N2 atmosphere. 1H and 13C NMR spectra were recorded at 400 MHz with a Mercury plus 400 spectrometer at 298 K and tetramethylsilane (TMS) as an internal reference. The 1H and 13C NMR chemical shifts are reported relative to the residual solvent signals. Coupling constants (J) are denoted in Hz and chemical shifts (δ) in ppm. Multiplicities are denoted as follows: s = singlet, d = doublet. 2D NMR spectra (NOESY and DOSY) and variable-temperature 1H NMR spectra were recorded on Bruker 500 MHz Spectrometer. Mass spectra were recorded with Thermo Scientific LTQ XL spectrometer with methanol or acetonitrile as solvents. For the single crystals, the data sets were treated with the SQUEEZE program to remove highly disordered solvent molecules. The crystallographic formulae include the number of solvent molecules was suggested by the SQUEEZE program. Scanning electron microscopy (SEM) was performed on a Hitachi S-4800 microscope. The AFM samples were prepared by drop casting method using mica sheet as substrate. All the AFM images were obtained on a Dimension FastScan (Bruker), using ScanAsyst mode under ambient condition.
Data availability
The data that support the findings of this study are available from the authors on reasonable request, see author contributions for specific data sets. The X-ray crystallographic coordinates for structures reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition numbers CCDC 1882113 (DPA[3]), 1948482 (DPA[4]), 1948483 (DPA[3]⊃ethene), 1975012 (DPA[3]⊃ethyne), 2015861 (DPA[3]-a), and 2011992 (DPA[3]-b). These data can be obtained free of charge from The Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif.
References
Cram, D. J. The design of molecular hosts, guests, and their complexes (Nobel Lecture). Angew. Chem. Int. Ed. Engl. 27, 1009–1020 (1988).
Lehn, J.-M. Supramolecular chemistry-scope and perspectives molecules, supermolecules, and molecular devices (Nobel Lecture). Angew. Chem. Int. Ed. Engl. 27, 89–112 (1988).
Stoddart, J. F. Mechanically interlocked molecules (MIMs)-molecular shuttles, switches, and machines (Nobel Lecture). Angew. Chem. Int. Ed. 56, 11094–11125 (2017).
Sauvage, J.-P. From chemical topology to molecular machines (Nobel Lecture). Angew. Chem. Int. Ed. 56, 11080–11093 (2017).
Rebek, J. Jr. Hydrogen-Bonded Capsules: Molecular Behavior In Small Spaces. (World Scientific Publishing, Singapore, 2015).
Jasti, R., Bhattacharjee, J., Neaton, J. B. & Bertozzi, C. R. Synthesis, characterization, and theory of [9]-, [12]-, and [18]cycloparaphenylene: carbon nanohoop structures. J. Am. Chem. Soc. 130, 17646–17647 (2008).
Lee, S., Chen, C.-H. & Flood, A. H. A pentagonal cyanostar macrocycle with cyanostilbene CH donors binds anions and forms dialkylphosphate [3]rotaxanes. Nat. Chem. 5, 704–710 (2013).
Ke, H. et al. Shear-induced assembly of a transient yet highly stretchable hydrogel based on pseudopolyrotaxanes. Nat. Chem. 11, 470–477 (2019).
Zhang, G.-W. et al. Triptycene-based chiral macrocyclic hosts for higly enan-tioselective recognition of chiral guests containing a trimethylamino group. Angew. Chem. Int. Ed. 55, 5304–5308 (2016).
Ryan, S. T. J. et al. Dynamic and responsive host in action: light-controlled molecular encapsulation. Angew. Chem. Int. Ed. 55, 16096–16100 (2016).
Bo, G. D., Dolphijn, G., McTernan, C. T. & Leigh, D. A. [2]Rotaxane formation by transition state stabilization. J. Am. Chem. Soc. 139, 8455–8457 (2017).
Wu, X. et al. Tetraurea macrocycles: aggregation-driven binding of chloride in aqueous solutions. Chem 5, 1210–1222 (2019).
He, Q. et al. Selective solid-liquid and liquid-liquid extraction of lithium chloride using strapped calix[4]pyrroles. Angew. Chem. Int. Ed. 57, 11924–11928 (2018).
Wang, W. et al. Organometallic rotaxane dendrimers with fourth-generation mechanically interlocked branches. Proc. Natl Acad. Sci. USA 112, 5597–5601 (2015).
Wang, X. Q. et al. Dual stimuli-responsive rotaxane-branched dendrimers with reversible dimension modulation. Nat. Commun. 9, 3190 (2018).
Zhang, C.-W. et al. Construction of supramolecular polymer gels cross-linked by two types of discrete well-defined metallacycles through self-sorting. Acta Polym. Sin. 1, 71–79 (2017).
Jiang, B. et al. Construction of π-surface-metalated pillar[5]arenes which bind anions via anion-π interactions. Angew. Chem. Int. Ed. 56, 14438–14442 (2017).
Li, B. et al. Terphen[n]arenes and quaterphen[n]arenes (n=3-6): one-pot synthesis, self-assembly into supramolecular gels, and iodine capture. Angew. Chem. Int. Ed. 58, 3885–3889 (2019).
Song, N. et al. Molecular-scale porous materials based on pillar[n]arenes. Chem 4, 2029–2053 (2018).
Jie, K., Zhou, Y., Li, E. & Huang, F. Nonporous adaptive crystals of pillararenes. Acc. Chem. Res. 51, 2064–2072 (2018).
Shimizu, L. S., Salpage, S. R. & Korous, A. A. Functional materials from self-assembled bis-urea macrocycles. Acc. Chem. Res. 47, 2116–2127 (2014).
Ghadiri, M. R. et al. Self-assembling organic nanotubes based on a cyclic peptide architecture. Nature 366, 324–327 (1993).
Gauthier, D., Baillargeon, P., Drouin, M. & Dory, Y. L. Self-assembly of cyclic peptides into nanotubes and then into highly anisotropic crystalline materials. Angew. Chem. Int. Ed. 40, 4635–4638 (2001).
Scanlon, S. & Aggeli, A. Self-assembling peptide nanotubes. Nano Today 3, 22–30 (2008).
Hamley, I. W. Peptide nanotubes. Angew. Chem. Int. Ed. 53, 6866–6881 (2014).
Moore, J. S. Shape-persistent molecular architectures of nanoscale dimension. Acc. Chem. Res. 30, 402–413 (1997).
Shetty, A. S., Zhang, J. & Moore, J. S. Aromatic π-stacking in solution as revealed through the aggregation of phenylacetylene macrocycles. J. Am. Chem. Soc. 118, 1019–1027 (1996).
Lahiri, S., Thompson, J. L. & Moore, J. S. Solvophobically driven π-stacking of phenylene ethynylene macrocycles and oligomers. J. Am. Chem. Soc. 122, 11315–11319 (2000).
Frischmann, P. D., Guieu, S., Tabeshi, R. & MacLachlan, M. J. Columnar organization of head-to-tail self-assembled Pt4 rings. J. Am. Chem. Soc. 132, 7668–7675 (2010).
Li, Y. et al. Giant, hollow 2D metalloarchitecture: stepwise self-assembly of a hexagonal supramolecular nut. J. Am. Chem. Soc. 138, 10041–10046 (2016).
Shi, B. et al. Spontaneous formation of a cross-linked supramolecular polymer both in the solid state and in solution, driven by platinum(II) metallacycle-based host-guest interactions. J. Am. Chem. Soc. 141, 6494–6498 (2019).
Yuan, L. et al. Highly efficient, one-step macrocyclizations assisted by the folding and preorganization of precursor oligomers. J. Am. Chem. Soc. 126, 11120–11121 (2004).
Yang, Y. et al. Strong aggregation and directional assembly of aromatic oligoamide macrocycles. J. Am. Chem. Soc. 133, 18590–18593 (2011).
Li, X. et al. Liquid-crystalline mesogens based on cyclo[6]aramides: distinctive phase transitions in response to macrocyclic host-guest interactions. Angew. Chem. Int. Ed. 54, 11147–11152 (2015).
Dawn, S. et al. Self-assembled phenylethynylene bis-urea macrocycles facilitate the selective photodimerization of coumarin. J. Am. Chem. Soc. 133, 7025–7032 (2011).
Si, W., Li, Z.-T. & Hou, J.-L. Voltage-driven reversible insertion into and leaving from a lipid bilayer: tuning transmembrane transport of artificial channels. Angew. Chem. Int. Ed. 53, 4578–4581 (2014).
Ogoshi, T., Takashima, S. & Yamagishi, T.-A. Photocontrolled reversible guest uptake, storage, and release by azobenzene-modified microporous multilayer films of pillar[5]arenes. J. Am. Chem. Soc. 140, 1544–1548 (2018).
Ogoshi, T., Yamagishi, T.-a & Nakamoto, Y. Pillar-shaped macrocyclic hosts pillar[n]arenes: new key players for supramolecular chemistry. Chem. Rev. 116, 7937–8002 (2016).
Wu, J.-R. & Yang, Y.-W. New opportunities in synthetic macrocyclic arenes. Chem. Commun. 55, 1533–1543 (2019).
Grzybowski, M., Skonieczny, K., Butenschön, H. & Gryko, D. T. Comparison of oxidative aromatic coupling and the Scholl reaction. Angew. Chem. Int. Ed. 52, 9900–9930 (2013).
Xue, M. et al. Pillararenes, a new class of macrocycles for supramolecular chemistry. Acc. Chem. Res. 45, 1294–1308 (2012).
Peng, C. & Schlegel, H. B. Combining synchronous transit and quasi-newton methods to find transition states. Isr. J. Chem. 33, 449–454 (1993).
Peng, C., Ayala, P. Y., Schlegel, H. B. & Frisch, M. J. Using redundant internal coordinates to optimize equilibrium geometries and transition states. J. Comp. Chem. 17, 49–56 (1996).
Omachi, H., Segawa, Y. & Itami, K. Synthesis and racemization process of chiral carbon nanorings: a step toward the chemical synthesis of chiral carbon nanotubes. Org. Lett. 13, 2480–2483 (2011).
Nimse, S. B. & Kim, T. Biological applications of functionalized calixarenes. Chem. Soc. Rev. 42, 366–386 (2013).
Kim, S. K. & Sessler, J. L. Calix[4]pyrrole-based ion pair receptors. Acc. Chem. Res. 47, 2525–2536 (2014).
Kumari, H., Deakyne, C. A. & Atwood, J. L. Solution structures of nanoassemblies based on pyrogallol[4]arenes. Acc. Chem. Res. 47, 3080–3088 (2014).
Pochorovski, I. & Diederich, F. Development of redox-switchable resorcin[4]arene cavitands. Acc. Chem. Res. 47, 2096–2105 (2014).
Majewski, M. A. & Stępień, M. Bowls, hoops, and saddles: synthetic approaches to curved aromatic molecules. Angew. Chem. Int. Ed. 58, 86–116 (2019).
Šponer, J., Riley, K. E. & Hobza, P. Nature and magnitude of aromatic stacking of nucleic acid bases. Phys. Chem. Chem. Phys. 10, 2595–2610 (2008).
Wu, J. et al. Controlled self-assembly of hexa-peri-hexabenzocoronenes in solution. J. Am. Chem. Soc. 126, 11311–11321 (2004).
Gazit, E. A possible role for π-stacking in the self-assembly of amyloid fibrils. FASEB J. 16, 77–83 (2002).
Martinez, C. R. & Iverson, B. L. Rethinking the term “π-stacking”. Chem. Sci. 3, 2191–2201 (2012).
Jennings, W. B., Farrell, B. M. & Malone, F. J. Attractive intra-molecular edge-to-face aromatic interactions in flexible organic molecules. Acc. Chem. Res. 34, 885–894 (2001).
Martin, R. B. Comparisons of indefinite self-association models. Chem. Rev. 96, 3043–3064 (1996).
Chen, Z., Lohr, A., Saha-Moller, C. R. & Wurthner, F. Self-assembled π-stacks of functional dyes in solution: structural and thermodynamic features. Chem. Soc. Rev. 38, 564–584 (2009).
Matsuno, T., Kogashi, K., Sato, S. & Isobe, H. Enhanced yet inverted effects of π-extension in self-assembly of curved π-systems with helicity. Org. Lett. 19, 6456–6459 (2017).
Liao, P.-Q., Zhang, W.-X., Zhang, J.-P. & Chen, X.-M. Efficient purification of ethene by an ethane-trapping metal-organic framework. Nat. Commun. 6, 8697 (2015).
Li, L. et al. Ethane/ethylene separation in a metal-organic framework with iron-peroxo sites. Science 362, 443–446 (2018).
Shibasaki, K., Fujii, A., Mikami, N. & Tsuzuki, S. Magnitude and nature of interactions in benzene-X (X = ethylene and acetylene) in the gas phase: significantly different CH/π interaction of acetylene as compared with those of ethylene and methane. J. Phys. Chem. A 111, 753–758 (2007).
Tekin, A. & Jansen, G. How accurate is the density functional theory combined with symmetry-adapted perturbation theory approach for CH-π and π-π interactions? A comparison to supermolecular calculations for the acetylene-benzene dimer. Phys. Chem. Chem. Phys. 9, 1680–1687 (2007).
Majumder, M., Mishra, B. K. & Sathyamurthy, N. CH-π and π-π interaction in benzene-acetylene clusters. Chem. Phys. Lett. 557, 59–65 (2013).
Thallapally, P. K. et al. Acetylene absorption and binding in a nonporous crystal lattice. Angew. Chem. Int. Ed. 45, 6506–6509 (2006).
Acknowledgements
X.S. acknowledges the financial supports sponsored by Shanghai Sailing Program (19YF1412900) and the Fundamental Research Funds for the Central Universities. J.W. thanks to Austrian Science Fund (FWF): M 2709-N28. We thank Yan-Fei Niu, Tan Ji, Yi Qin, Ji-Chuang Shen, Wei-Jian Li, and Xi Liu for their help in collecting experimental data. We thank the staffs from BL17B beamline of National Facility for Protein Science in Shanghai (NFPS) at Shanghai Synchrotron Radiation Facility, for assistance during data collection.
Author information
Authors and Affiliations
Contributions
X.S. and L.M. conceived the project, analyzed the data, and wrote the manuscript. L.M. performed the most of experiments. X.-L.Z. conducted single crystal analyses. J.W. carried out DFT calculation. Y.H., Q.T., W.-L.J., W.W., and D.Y. helped in experiments and data analyses. All authors discussed the results and commented on the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Mao, L., Hu, Y., Tu, Q. et al. Highly efficient synthesis of non-planar macrocycles possessing intriguing self-assembling behaviors and ethene/ethyne capture properties. Nat Commun 11, 5806 (2020). https://doi.org/10.1038/s41467-020-19677-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-020-19677-x
This article is cited by
-
Applications of macrocycle-based solid-state host–guest chemistry
Nature Reviews Chemistry (2023)
-
Effect of substituents on self-assembling behaviors and charge transport properties of nonplanar heterocycloarenes
Science China Chemistry (2023)
-
Hexnut[12]arene and its derivatives: Synthesis, host-guest properties, and application as nonporous adaptive crystals
Science China Chemistry (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.