Skip to main content

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

# Multipurpose self-configuration of programmable photonic circuits

## Abstract

Programmable integrated photonic circuits have been called upon to lead a new revolution in information systems by teaming up with high speed digital electronics and in this way, adding unique complementary features supported by their ability to provide bandwidth-unconstrained analog signal processing. Relying on a common hardware implemented by two-dimensional integrated photonic waveguide meshes, they can provide multiple functionalities by suitable programming of their control signals. Scalability, which is essential for increasing functional complexity and integration density, is currently limited by the need to precisely control and configure several hundreds of variables and simultaneously manage multiple configuration actions. Here we propose and experimentally demonstrate two different approaches towards management automation in programmable integrated photonic circuits. These enable the simultaneous handling of circuit self-characterization, auto-routing, self-configuration and optimization. By combining computational optimization and photonics, this work takes an important step towards the realization of high-density and complex integrated programmable photonics.

## Introduction

Integrated photonics is evolving from discrete components to complete application-specific photonic integrated circuits (ASPICs) with ever increasing complexity1,2,3. Although ASPICs have been successfully used to demonstrate many applications, only in a few fields like transceivers and data centers, the fabrication volumes are high enough to compensate for the nonrecurring overhead costs4,5. Current time-to-market and time-for-development of photonic integrated circuit (PIC)-based systems is limited by post-fabrication custom processes and by large development periods that range from 12 to 24 months per design-fab-packaging-test iteration6. As in electronics, incorporating programmability and reconfigurability into PICs at an increasing pace will enable cost-effective and mass producible, almost-instant development times, negligible up-front nonrecurring engineering costs and upgradable components aided by software programming7,8,9.

Developing large-scale programmable integrated photonic (PIP) circuits is catalysing considerable research efforts as they are expected to find applications in a myriad of fields, where the flexibility brought by reconfigurability is a unique asset. PIP circuits enable broadband analog processing, which is of particular interest in two scenarios with the considerable impact expected in the short/midterm. The first includes applications where analog processing is required per se, like artificial intelligence, deep learning, and quantum information systems. The second includes applications, such as 5/6 G telecommunications, switching, data center interconnections, hardware acceleration, and sensors, where photonic analog processing can team up with high-speed digital electronic systems to overcome expected limitations arising from the demise of Moore’s law.

The processing power of programmable photonic waveguide meshes scales up dramatically with the number of Tunable Basic Units (TBUs) integrating phase actuators in interferometric cells. As shown in Fig. 1a, current state-of-the-art ranges from a few tens to a few hundreds of TBUs per chip10,11,12,13,14,15,16,17,18. However, medium/large-scale complexity PIPs will require many hundreds or even thousands of TBUs, and feasibility will only be possible if soft operations controlling the minimal use of physical resources, optimum circuit placement and configuration, dynamic adaptationm and self-healing are incorporated. This demands the ability to handle, monitor, and control hundreds or thousands of different variables. Computational optimization methods address the management and control of complex systems19,20,21. Tailoring and adapting these to PIPs can overcome many of their scalability limits. Furthermore, they provide information for compensating nonideal behavior of the components thereby relaxing the need for ideal operation conditions22.

Here, we develop two multipurpose methods for the self-configuration and optimization of large-scale fault-tolerant PIPs. The first requires data gathered from a periodic, automated pre-characterization routine to configure optical interconnections, delay lines, and optical circuits. The second is based on computational optimization routines that obtain iteratively, without prior pre-characterization, the optimum driving configurations to achieve a targeted functionality. We provide both statistical simulations and experimental verifications to demonstrate, for the first time to the best of our knowledge, the achievement of the targeted circuit configurations, the mitigation of fabrication yield distributed parasitic errors (nonuniform loss and optical crosstalk), and of the dynamic crosstalk arising from thermal and electrical effects through self-configuration. Successful parallel configuration of independent multitasking operations is also demonstrated. Finally, we discuss the impact of the work and comment on the future of this research.

## Results

### Circuit programming based on global algorithms and presets

To illustrate the proposed multipurpose self-configuration algorithms, we consider the core of a field programmable photonic gate array (FPPGA)23, as an example of programmable circuit. The FPPGA main architecture shown in Fig. 1b includes the core, several high-performance blocks (HPBs) and optical input/output ports. This configuration enables the synthesis and programming of PICs. The optical core shown in Fig. 1c, is implemented by means of a waveguide mesh. The specific case shown in Fig. 1c is a longitudinally parallel, flat general-purpose hexagonal waveguide mesh22, although other configurations can be considered16,24. Figure 1b illustrates a given operational scenario where two circuits (in red and green) are configured in the FPPGA.

Control and configuration protocols of the FPPGA have not been demonstrated to date. They can be potentially classified into different types, depending on the scope, the control strategy, and the hardware requirements in terms of number of optical readouts and their position in the circuit. In this work, all the reported methods employ the closed loop control system illustrated in Fig. 1d. It includes an electrical IC to read a signal proportional to the optical power at every external optical port in the circuit (Np), an electronic processor to run the algorithms and a driving circuitry to configure the phases at every TBU, described by the vector v. For most algorithms, we define an operation as the completion of a cycle involving the configuration of v, and the extraction of the full scattering matrix of the aforementioned circuit. In most of examples, only a portion of the scattering matrix is required. (For additional details, see “Methods” and Supplementary Note 1).

The set of algorithms developed in this section require a prior knowledge of data, regarding the mesh architecture and full bias calibration information of every TBU behavior. The information involving the architecture itself, includes the interconnection scheme, and the physical features that define the TBUs, such as their basic unit length (BUL) and basic unit delay25. The information regarding the full control of every TBU includes the computation of the nonideal passive offsets of the phase of each TBU, the calibration curve (tuning response) of each phase shifter, estimated insertion loss, power consumption26,27, and the tuning crosstalk matrix that characterizes the undesired coupled effects of neighboring phase actuators. These requirements can be obtained by means of the periodic application of self-characterization routines based on iterative maximization and minimization methods28, and regression-based approximations (see implementation and detailed analysis in Supplementary Note 2).

Auto-routing and pathfinding algorithms are software routines capable of finding optimum optical paths or interconnections between any two connections of a FPPGA, with respect to a set of pre-defined figures of merit and the data gathered from the self-characterization stage. They can also be applied to define circuits or interconnections between programmed components and external HPBs, as shown in Fig. 1b. The circuit architecture is mapped into a graph (from graph theory), where optical nodes between programmable unit cells define the graph’s vertex and their connections define the graph’s edges. It is then possible to apply graph-based optimization algorithms to configure the targeted circuit. Each edge or interconnection is loaded with the associated key limiting factors or features (fi) gathered during the characterization stage in the form of a weighted sum called transmission distance (TD), as described in Eq. (1), and the accumulated penalties are then considered by the optimizer. To perform the auto-routing task, a shortest path tree algorithm with restrictions can be employed26,27. More information can be found in Supplementary Note 3.

$${\mathrm{TD}}_{xy} = c_1 \times f_1 + c_2 \times f_2 + c_3 \times f_3 + \ldots$$
(1)

The auto-routing algorithm can be combined with the self-characterization routines described in Supplementary Note 2 to dynamically configure the FPPGA core. Following the scheme described in Fig. 1d, our measurement setup consists of a multichannel electronic driver array subsystem based on a table-top multichannel current source along with an Optical Spectrum Analyzer as an optical monitor, with custom routines in Python being run on a standard personal computer, thus completing the entire feedback loop along with a processing unit. We employed the setup in a 7-hexagonal waveguide mesh with 30 TBUs with the circuit being reported in ref. 17.

To conduct the experiment, as shown in Fig. 2a, we first employed the self-characterization cycle to calibrate the responses of every phase actuator and TBU, and their power consumptions. Then, we used this information as input for the auto-routing algorithm to set up seven different circuit implementations, referred in Fig. 2b as configs. 1–7: a 10-TBU optical ring resonator (ORR), a 4-TBU imbalanced MZI, a simultaneous combination of a 6-TBU ORR working in parallel with a 2-TBU imbalanced MZI, a 6-TBU ORR, a second-order coupled resonator optical waveguide with cavity length of 6-TBU, a simultaneous combination of two delay line channels of 6 and 5 TBUs, and a 12-TBU ORR. Translating each circuit configuration to an array v, including the required electrical current value for each phase actuator in the arrangement and loading each at a time to the processor allows us to demonstrate the first dynamic reconfiguration of a multipurpose waveguide mesh arrangement. Figure 2b illustrates how the waveguide mesh arrangement functionality evolves over time. The precise spectral performance can be found in the lower insets. The tuning steps are limited to jumps of 5 mA to prevent undesired overshoots, to protect the circuit and to better illustrate the dynamic response between configurations. Each step can be done in <1 s, limited by the hardware of the control system employed and its USB connections, as well as the Serial Peripheral Interface.

### Circuit programming based on computational optimization

Algorithms requiring a previous knowledge and characterization routines can be employed, as shown above to control and program FPPGAs, and waveguide meshes. However, the periodic execution of self-characterization routines can be time and resource intensive when scaling FPPGA cores to a large-scale number of programmable units. Information gathering requirements for smart control techniques, addressing nonuniform loss distributions over the circuit, dynamic tuning crosstalk between actuators and optical crosstalk due to imperfect design and fabrication can render these methods inefficient. Ideally, programming, supervision, and control should be achieved without the need for prior knowledge and characterization.

Here, we propose, apply, and demonstrate a general scheme of computational optimization methods to program the FPPGA core, as shown in Fig. 1b. We illustrate it with two configuration examples, an all-cross TBU interconnection configuration and the automatic definition of optical filters (a third example dealing with a 1 × 8 beamsplitter can be found in Supplementary Note 5). In every case, we consider the control scheme architecture in Fig. 1d. However, as opposed to the previous approach, this method does not require prior information (pre-characterization). This time, we assume that the FPPGA core is a black box that returns the scattering matrix datasheet as a function of the chip´s passive and dynamic conditions, and the electrical driving. Then, the optical readout system extracts a portion of the scattering matrix and closes the feedback loop of the optimization system. This portion of the extracted matrix is employed to compute the cost function that is minimized when the targeted application is achieved. Each computational optimization algorithm employs different strategies to decide the new driving configuration to get closer to the targeted final operation through the minimization of a customized cost function. Thus, the definition of a cost function specific for each application is a non-straightforward task and different cost functions can be employed to define the same application, thereby achieving different convergence rates and compromising the success of the algorithm. In our results, we show both the sensitivity to different cost functions definitions, to their specific hyperparameters and the statistical behavior of the proposed methods.

Optimization methods can be classified according to different criteria: global and local search algorithms depending on their suitability to find the global maximum or their ability to converge rapidly to their closest minimum point; derivative and nonderivative methods depending on whether the computation of the gradient is employed for each iteration or not; deterministic or stochastic methods depending on the inclusion of random variables during the procedure; and individual or population approaches, depending on the number of search points employed during each iteration. In order to test the application of optimization methods for the control of large-scale programmable PICs, we employ first a performance estimator based on an induction method29. This allows us, in further sections, to introduce nonideal effects and to perform a progressive analysis. In addition, some of the results are experimentally verified with a real waveguide mesh PIC in the final section. See “Methods”, and Supplementary Note 1 and 4 for more details.

Self-configuration of all-cross function aims to configure every phase actuator so that all TBUs in the waveguide mesh are in cross-state. This function is particularly interesting for both calibration and characterization, as well as for setting an optimized initial point for some of the optimization methods described in this work and enhance their convergence. The cost function is just an example of a broad range of applications involving arbitrary routing of the optical signals between the optical ports.

In this example, illustrated in Fig. 3, the optical channels are described by the following port pairs: 12–23, 14–21, 10–1, 8–3, 13–6, 15–4, 17–2, 19–24, and 11–16, 9–18, 7–20, 5–22. Note that the last set of four pairs of ports is redundant and could be deleted from the cost function, as they do not incorporate additional TBUs. The new cost function is described as a weighted sum as in Eq. (1), with the following coefficient and feature definition. (See Supplementary Note 6 for a full parameter description and definitions):

$${\mathrm{CF}}_1^{{\mathrm{allcross}}} = \left\{ {\begin{array}{*{20}{c}} {c_1 = - 1,} \\ {f_1 = \frac{1}{N}\mathop {\sum}\limits_1^{\mathrm{{chs.}}} {\left( {\log \left( {\left| {H_{{\mathrm{chs.}}}} \right|} \right)} \right)} ,} \end{array}} \right.$$
(2)

where N is the number of optical channels incorporated in the optimization process and |Hchs.|, the maximum absolute value of the intensity of the electrical field measured for each optical channel listed before. To perform a qualitative analysis of the achieved performance, we monitor and define the output feature 1 as the average power transmission response in the targeted optical channels defining the all-cross operation. It is expressed in logarithmic units.

We performed the self-configuration process based on an evolutionary genetic algorithm (GA), a particle swarm optimization (PSO), and gradient descent with momentum. For each case, we performed a grid search with all the hyperparameters involved in the optimization to demonstrate their impact on the efficiency of the configuration process (see “Methods” and Supplementary Note 6). The sensitivity to the hyperparameters selection that configure the algorithms is mitigated through the use of adaptative values allowing the scheduling of the exploration and exploitation capabilities of the self-configuration task. It results in a robust statistical behavior, once we are close to the optimal set of hyperparameters that configure the algorithm. As shown in Fig. 3, we repeated 100 times the self-configuration routine and obtained an average error better than 3-dB in the 95% and 76.66% of cases for the GA and the PSO, respectively, in <3000 and 4000 operations. The PSO hyperparameters configuration included an adaptative inertia from 0.9 to 0.35, 108 particles, cognitive 0.7, and social 1.8. The GA employed a population of 144 particles, where the 20% mating and a 50% muting. A decay is scheduled for the muting weight. Finally, we performed a gradient descent with momentum approach, revealing that in the best case, it is possible to complete the task in 750 operations with a learning rate of 50 and a momentum coefficient of 0.5. A similar application example, the 1 × 8 optical beamsplitter is covered in the Supplementary Note 6.

Self-configuration of optical filters function enables programming the waveguide mesh arrangement to suppress a given spectral band while maintaining the minimum losses in the passband. Self-configuration automatizes this process and involves the selection between thousands of parameters, dealing with the mitigation of nonideal effects like optical crosstalk, tuning crosstalk, providing power consumption and reducing the hardware resources (TBUs) to perform the targeted function, and the optical losses. For the definition of the cost function, it is possible to consider many features, such as the insertion loss of the passband, the extinction ratio of the filter, the roll off, the optical power at the nontargeted ports, etc. In addition, one can define the targeted spectral mask of the filter and define a cost function feature considering the error between the obtained trace and the mask at each iteration. In this example, we show the self-reconfiguration capability employing only the mean square error in the spectral mask, although multiple objectives could be added to the cost function:

$${\mathrm{CF}}_1^{{\mathrm{O.Filter}}} = \left\{ {\begin{array}{*{20}{c}} {c_1 = 1,} \\ {f_1 = \frac{1}{{N_\lambda }}\mathop {\sum}\limits_\lambda ^ \cdot {\left( {M_\lambda - 20\log _{10}\left( {\left| {S_{4,1}\left( \lambda \right)} \right|} \right)} \right)^2,} } \end{array}} \right.$$
(3)

where Nλ is the number of wavelength points, Mλ is the value of the spectral mask at each wavelength point, and S4,1 is the value of the scattering matrix at the optical channel defined by ports 4 and 1 at a given wavelength. Note that this operation is equivalent to the average of the distance between the mask and the measured trace. See Fig. 3 for the location of the ports. To demonstrate the performance of the self-configuration method, we defined a set of different spectral maks (see Fig. 4).

To compare between methods and cost functions, we analyzed also the evolution of two output features that account for the insertion loss in the passband (OF1) and the extinction ratio of the filter (OF2). We tested three approaches based on GA, PSO, and gradient descent with momentum. For each approach, we tested the sensitivity of the hyperparameters configuring the algorithms employing, for all cases, a grid search for the hyperparameters of a mask describing a 2-BUL interferometric free spectral range (FSR), illustrated in Fig. 4a–d. The GA–PSO approaches provide good hyperparameter combinations for convergence, whereas the gradient descent approach offered less and sometimes nonexistent convergence success. For the GA and PSO, the use of adaptative rates (mainly for mutation and inertia, respectively) provides better results in terms of convergence to an optimum configuration and shows less sensitivity to their selection. (See Supplementary Note 7 for extended results). In particular, we illustrate the behavior of a PSO based self-configuration maintaining a fix set of hyperparameters (adaptative linear inertia: 0.9–0.35 in 1000 iterations, cognitive: 0.7, social: 1.8). The figure plots different spectral masks, the average spectral response, standard deviation, and approximated 95% confidence interval, assuming gaussian distributions after 4000 operations. Results demonstrate that the self-configuring routine tunes the phase actuators to achieve the targeted mask successfully, thus creating the required interferometric patterns in the waveguide mesh arrangement. A broad range of filters with FSRs comprising of different TBU numbers have been considered in the trials. Also, a wide range of passband and stopband bandwidths, and extinction ratios are tested. We observed that some of the structures require a larger-scale mesh arrangement to provide the targeted higher-order filter masks, although the obtained results are by themselves remarkable (see Fig. 4e–x).

Self-configuration managing nonideal components: self-configuration in the presence of dynamic tuning crosstalk increases the complexity of the task due to the undesired thermal coupling between the phase actuators. To test the behavior of the proposed methods, we performed two statistical tests, with and without the presence of thermal crosstalk. In the latter, we loaded the performance model29 with a severe crosstalk matrix, where the crosstalk coefficients are obtained from a uniform distribution from 0 to 5% (see “Methods”). As shown in Fig. 4y–bb, the self-configuration routine considers the dynamic tuning crosstalk effect during the optimization procedure, thus obtaining the targeted spectral shape. We ran a second example with a different spectral mask and crosstalk from a uniform distribution up to 10%. Results are plotted in Fig. 4cc–ff. These scenarios are by far, more challenging than the ones experienced by a real system, where the crosstalk ranges from 2 to 3% and is decreasing as a function of the distance17,30,31. These results open the path for employing waveguide mesh arrangements with much higher integration density, reducing the distance between components22. See Supplementary Note 7, for extended results.

Self-configuration also enables fault-tolerant and self-healing circuits. While fabrication and component yields can completely discard a whole die in application-specific PICs, waveguide mesh arrangements offer potential fault-tolerant and self-healing capabilities. This advantage comes from the repetition, interconnection and cooperation of simple components in the mesh that enable the use of alternative circuit paths, when some parts of the circuit are damaged. To illustrate a demonstration example, we configured a filter specified by the spectral mask, appearing in Fig. 4gg–jj, where we decreased the performance of TBUs with a high probability of use (A6, B6, and C6, see Fig. 3a) by imposing 30 dB insertion loss to each one. After running the statistical test, the self-configuration process is able to provide an alternative layout in the available mesh space and maintain, most notably, the demanded response (for extended results, see Supplementary Note 7).

A final experiment, illustrated in Fig. 4kk–nn, demonstrated the ability of the self-configuration algorithm to program simultaneously two circuits. It employed two spectral masks with different characteristics and considered ports 1–4 (blue) and ports 23–21 (red). This result opens the path for the automated configuration of multitasking operations in multipurpose programmable PICs.

### Experimental demonstration of self-configuration methods

Finally, as illustrated in Fig. 5, we programmed several interferometric circuits experimentally in the 30-TBU waveguide mesh using PSO algorithm, following the same methodology and cost function as in the simulated examples. The spectral masks were obtained using previously obtained current presets. We limited the number of variables to be optimized to 13, as it was the number of current sources available for the experiment. In <416 operations, the algorithm returns the targeted spectral mask with average MSE errors of 0.542, 0.702, and 4.139 for configs. 1, 2, and 3, respectively. For additional details of the experimental setup, see Supplementary Note 8. For additional configurations, details of the architecture, optimization methods, and extended results, see Supplementary Note 9.

## Discussion

Most reported state-of-the-art reconfigurable photonic circuits are configured manually or in a semiautomated manner by means of open-loop control, utilizing look-up tables that includes the pre-characterization of each tuning element and inter-element crosstalk17,32,33,34,35,36. Although a significant number of proof-of-concepts and standalone components have been demonstrated, this approach does not scale efficiently with the number of tuning elements in complex large-scale circuits, including hundreds or thousands of components and actuators. These circuits demand both a dedicated control system and a software layer to automate their configurations for two reasons. First, the complexity of the targeted operations and nonideal components would lead to configurations that cannot be predicted in terms of pre-characterized data or human experience. Secondly, agile programmable systems require a fast and reliable feedback mechanism to exploit their reconfiguration capabilities.

The former is only one of the many challenges to address in developing large-scale programmable photonic circuits. Limitations connected to fabrication defects, design deviations, passive parasitic effects, power consumption, thermal crosstalk, and robustness of phase shifters must be considered, in conjunction with others connected to reconfiguration speed and enhanced convergence of automated functions. Due to space restrictions, we specifically cover these in Supplementary Note 10. In addition, a significant challenge resides in the efficient management of control circuit complexity, the interfacing of a large number of electronic signals and the associated large number of variables and equations to be solved. Although different in application, recent published chips with similar requirements integrate a great number of optical power monitors and phase shifters. For example, two recent demonstrations integrate 900 optical power monitors and 448 phase shifters37 and 1024 phase shifters38, respectively, in footprints <300 mm2.

Equally important is the correct management of the complexity of optimization algorithms and circuit programming. Proposals have been reported to program PICs targeting specific applications. Examples of this include the configuration of multiport interferometers based on the individual control of tunable couplers and switches12,39,40, automated path scheduling and assessment of a complex wavelength-and-space-switch circuit41, automated bank filters42,43,44,45,46, reconfigurable all-pass filters47 and beamforming networks48. Large-scale and very large-scale PICs will find it difficult to rely on local feedback loops for controlling each tunable unit due to the excessive overhead caused by monitors and electronic access tracks.

The methods reported in this paper open a new direction toward an automated and reliable programming of complex multipurpose PICs. The best of two worlds can be exploited combining customized routines requiring data from automated pre-characterization routines and configuration strategies based on computational optimization methods. The first set provides a fast configuration response but does not solve tuning-based crosstalk problem, which is exacerbated in large-scale high-density circuits. In addition, the self-characterization routine needs to be applied periodically in order to compensate environmental variations. The second set combines creation of configuration-specific cost function definitions and optimization routines to self-configure complex circuits. Although we have provided a first demonstration of self-configuration functionality, results can be improved in terms of convergence speed. Further research is required to identify solutions incorporating more advanced optimization routines, cost function tailoring, and combination and scheduling of exploratory and local search methods, and machine-learning techniques21. Finally, the inclusion of multi-objective figure of merit opens the door to programming protocols embracing targeted performance, as well as additional features, such as power consumption and savings in the use-of-components. These can be optimized with multi-objective optimizers49. Regarding the configuration speed, an operation cycle is mainly limited by the time required to measure the desired portion of the scattering matrix. If this time is ~100 ms for 21 elements of the scattering matrix, a full reconfiguration process of 3000 operations would last ~5 min. These metrics can be improved enhancing the convergence and by combining both proposed configuration approaches to reduce the number of variables during the optimization process. Further details in this are in Supplementary Note 10. In this respect, the self-healing, fault-tolerant attributes of the reported work are expected to impact the methodology leading to the design and interaction with high integration density flexible and versatile multipurpose programmable PICs.

All in all, advances in photonic integration technologies, encapsulation, and novel designs and architectures pave the way for the development of a new class of multipurpose programmable PICs. Including hundreds or thousands phase actuators over a massively coupled arrangement of waveguides, these circuits potentially provide a flexible hardware framework to perform multiple and versatile applications. However, the absence of effective control and programming strategies limited the scalability of current demonstrations. In this work, we presented a control architecture and a set of control strategies to perform fault-tolerant self-configuration of the circuit to perform a targeted task. These algorithms are divided by configuration methods requiring pre-characterization routines, also presented, and advanced optimization methods that not only avoid this requirement but also overcome the presence of nonideal components with nonhomogeneous loss distribution, power consumptions, phase offsets, optical crosstalk, and tuning crosstalk. We proposed and developed the use of self-configuration routines based on stochastic population-based methods, such as GAs PSO for three applications, an all-cross router, a beamsplitter, and an optical filter configured for a wide variety of spectral masks. By combining computational optimization and photonics, this work makes important step toward a new paradigm in photonic integration: programmable photonics.

## Methods

### Architecture, variable space, and cost function definitions

The self-configuration algorithms proposed in this paper rely on the application and customization of optimization routines employed in a wide range of application fields. Optimization deals with the task of finding the optimal values for the variables of a system to maximize or minimize its output. An ideal optimizer should avoid stacking in local optima and explore efficiently the variable’s space to find the global optimum point, as well as converge efficiently when this is found.

In most of the applications and algorithms demonstrated in this paper, the system to be optimized is the general-purpose PIC. We consider the PIC as a black box whose response is given by the full scattering matrix of the circuit. The scattering matrix contains the spectral response of every optical port combination. Although a real system contains amplitude and phase response, we employ the overall amplitude response in our current methods. The overall system is modified through the application of a set of electrical signals that modify the optical properties locally in the circuit. This set of variables is defined by the vector v. When dealing with a real system, this vector can represent the electrical signal feeding each phase actuator or photonic actuator in general, whereas we employ phase shifts for the performance estimator that includes a model of the nonideal performance of every component29.

In this work, we apply both stochastic and derivative optimization techniques. In all cases, the optical system response is given by the settings applied to each phase actuator (v), the initial hardware conditions such as nonuniform loss distributions per TBU in the system, as well as the passive conditions (Cp). These nonideal effects coming from fabrication deviations of the waveguide geometry and environmental conditions modify the system performance, are considered to be unknown and random, and are selected from a normal distribution of mean 0.15 dB and std of 0.05 dB, and from a normal distribution between 0 and 2л, respectively, unless otherwise specified. For each wavelength, we obtain the scattering matrix of the circuit that represents the optical response for every input and output port combination as So,i.

$$S\left( {v,\lambda ,C_{\mathrm{p}}} \right) = \left( {\begin{array}{*{20}{c}} {S_{11}} & {S_{12}} & {...} & {S_{1P}} \\ {S_{21}} & \ddots & {\,} & \vdots \\ \vdots & {\,} & \ddots & \vdots \\ {S_{P1}} & \cdots & \cdots & {S_{PP}} \end{array}} \right)_\lambda = f\left( {v,\lambda ,C_{\mathrm{p}}} \right).$$
(4)

With the scattering matrix information, or a portion of it, we compute the cost function that is dependent of the application to be optimized. A process of cost function engineering requires the search of a function that is minimized when the targeted application is achieved. Once the cost function is computed, the optimization algorithm computes the next vector of variables for the driving system. Thus, the optimizers deal with finding the optimum values for the individual phase actuators in the circuit to minimize a cost function and get the desired response of the optical processor, even in the presence of nonideal conditions. The full cycle of driving, and monitoring is defined as an operation along this paper. The self-configuration algorithms proposed require the computation of a certain number of operations per iteration, so we rescale to number of operations to compare their performance (for additional details see Supplementary Note 1).

Understanding, simulating, and modeling thermal crosstalk: when tuning one phase actuator, for example a thermo-optic actuator, the physical effect causing the tuning in the desired waveguide can spread to the neighboring waveguides producing an undesired tuning effect. In the worst cases, even at distances >10 mm the tuning crosstalk effect can be appreciated17,50. The tuning crosstalk can be modeled by a constant that reflects the percentage of phase shift occurred in the nontargeted waveguide compared to the one experienced by the targeted waveguide. Simulations and experimental works result in a crosstalk coefficient between 1 and 3% at several hundreds of micrometers30,31. If extended to a system with multiple phase shifters, this effect can be modeled by a system of equations relating the effective phase shifts with the phase shifts set by the algorithm or the user.

$${\Delta}\phi _{{\mathrm{effective}}} = \left( {\begin{array}{*{20}{c}} 1 & {{\mathrm{CT}}_{12}} & \cdots & \cdots & {{\mathrm{CT}}_{1N}} \\ {{\mathrm{CT}}_{21}} & 1 & {\,} & {\,} & {{\mathrm{CT}}_{2N}} \\ {{\mathrm{CT}}_{31}} & {\,} & 1 & {\,} & \vdots \\ \vdots & {\,} & {\,} & \ddots & {{\mathrm{CT}}_{1N - 1}} \\ {{\mathrm{CT}}_{N1}} & {{\mathrm{CT}}_{N2}} & \cdots & \cdots & 1 \end{array}} \right)\left( {\begin{array}{*{20}{c}} {{\Delta}\phi _1} \\ {{\Delta}\phi _2} \\ \vdots \\ {\,} \\ {{\Delta}\phi _N} \end{array}} \right).$$
(5)

### Computational optimization methods

Genetic algorithm, also known as evolutionary algorithms, resemble natural selection and reproduction processes governed by rules that assure the survival of the fittest individuals in large populations. Individuals (points) are associated with identity genes that define a fitness measure (objective function value). A set of individuals form a population, which adapts and mutates following probabilistic rules that utilize the fitness function. In this case, our individuals are defined by v. For each generation, we select a percentage of the population that achieves the lowest cost function for matting between them and apply a mutation value that will decrease exponentially over each generation. In general, is classified as a global-search algorithm.

Particle swarm algorithm is a population-based algorithm that maintains at each iteration a swarm of particles (set of points) with a velocity vector associated with each particle. At each iteration, it generates a new set of particles from the previous swarm combining random and inherited parameters (inertia, cognition, and social). It is typically classified as a global-search algorithm.

Both of them are nonderivative methods. For additional details and derivative methods included, see Supplementary Note 4.

## Data availability

All data are available from the corresponding author upon reasonable request.

## Code availability

All codes are available from the corresponding author upon reasonable request.

## References

1. Chrostowski, L. & Hochberg, M. Silicon Photonics Design (Cambridge University Press, 2015).

2. Lin, Y. et al. Characterization of hybrid InP-TriPleX photonic integrated tunable lasers based on silicon nitride (Si 3N4/SiO2) microring resonators for optical coherent system. IEEE Photonics J. 10, 1400108 (2018).

3. Bogaerts, W. et al. Proc. Integrated Design for Integrated Photonics: from the Physical to the Circuit Level and Back (SPIE Optics and Optoelectronics, Prague, Czech Republic, 2013).

4. Inniss, D. & Rubenstein, R. Silicon Photonics: Fueling the Next Information Revolution (Elsevier Science, 2016).

5. Streshinsky, M. et al. The road to affordable, large-scale silicon photonics. Opt. Photonics News 24, 32–39, (2013).

6. Carrol, L. et al. Photonic packaging: transforming silicon photonic integrated circuits into photonic devices. Appl. Sci. 6, 426 (2016).

7. Capmany, J. & Pérez, D. Programmable Integrated Photonics (Oxford University Press, 2019).

8. Lyke, J. et al. An introduction to reconfigurable systems. Proc. IEEE 103, 291–317 (2015).

9. Capmany, J., Gasulla, I. & Pérez, D. The programmable processor. Nat. Photonics 10, 6–8 (2015).

10. Carolan, J. et al. Universal linear optics. Science 349, 711 (2015).

11. Ribeiro, A. et al. Demonstration of a 4×4-port universal linear circuit. Optica 3, 1348–1357 (2016).

12. Annoni, A. Unscrambling light—automatically undoing strong mixing between modes. Light Sci. Appl. 6, e17110 (2017).

13. Shen, Y. et al. Deep learning with coherent nanophotonic circuits. Nat. Photonics 11, 441–446 (2017).

14. Mennea, P. L. et al. Modular linear optical circuits. Optica 5, 1087–1090 (2018).

15. Zheng, D. et al. Low-loss broadband 5×5 non-blocking Si3N4 optical switch matrix. Opt. Lett. 44, 2629–2632 (2019).

16. Zhuang, L. et al. Programmable photonic signal processor chip for radiofrequency applications. Optica 2, 854–859 (2015).

17. Pérez, D. et al. Multipurpose silicon photonics signal processor core. Nat. Commun. 8, 636 (2017).

18. Zhang, W. & Yao, J. Photonic integrated field-programmable disk array signal processor. Nat. Commun. 11, 406 (2020).

19. Eberhart, J. K. R. A new optimizer using particle swarm theory. In MHS'95. Proceedings of the Sixth International Symposium on Micro Machine and Human Science (IEEE, Nagoya, Japan, 1995).

20. Whitley, D. A genetic algorithm tutorial. Stat. Comput. 4, 65–85 (1994).

21. Zibar, D., Wymeersch, H. & Lyubomirsky, I. Machine Learning under the spotlight. Nat. Photonics 11, 749–751 (2017).

22. Pérez, D. Programmable integrated silicon photonics waveguide meshes: optimized designs and control algorithms. In IEEE Journal of Selected Topics in Quantum Electronics, Vol. 26 (IEEE, 2019).

23. Pérez, D., Gasulla, I. & Capmany, J. Field-programmable photonic arrays. Opt. Express 26, 27265–27278 (2018).

24. Pérez, D., Gasulla, I., Soref, R. & Capmany, J. Reconfigurable lattice mesh designs for programmable photonic processors. Opt. Express 24, 12093–12106 (2016).

25. Pérez-López, D., Sánchez, E. & Capmany, Y. J. Programmable true time delay lines using integrated waveguide meshes. J. Lightwave Technol. 36, 4591–4601 (2018).

26. López, A. et al. Auto-routing algorithm for field-programmable photonic gate arrays. Opt. Express 28, 737–752 (2020).

27. Chen, X. & Boggaerts, W. A graph-based design and programming strategy for reconfigurable photonic circuits. In IEEE Photonics Society Summer Topical Meeting Series (SUM) (IEEE, Fort Lauderdale, FL, USA, 2019).

28. Pérez, D., López, A., DasMahapatra, P. & Capmany, J. Field-Programmable Photonic Array for multipurpose microwave photonic applications. In IEEE International Topical Meeting on Microwave Photonics (MWP) (IEEE, Ottawa, Canada, 2019).

29. Pérez, D. & Capmany, J. Scalable analysis for arbitrary photonic integrated waveguide meshes. Optica 6, 19–27 (2019).

30. Yegnanarayanan, S. et al. Automated initialization of reconfigurable silicon-nitride (SiNx) filters. In Conference on Lasers and Electro-Optics (IEEE, San José, CA, 2018).

31. Milanizadeh, M. et al. Cancelling thermal cross-talk effects in photonic integrated circuits. J. Light. Tech. 37, 1325–1332 (2019).

32. Xie, Y., Zhuang, L. & Lowery, A. J. Picosecond optical pulse processing using a terahertz-bandwidth reconfigurable photonic integrated circuit. Nanophotonics 7, 837–852 (2018).

33. Guan, B. et al. CMOS compatible reconfigurable silicon photonic lattice filters using cascaded unit cells for RF-photonic processing. IEEE J. Sel. Top. Quantum Electron. 20, 359–368 (2014).

34. Doylend, J. K. et al. Hybrid III/V silicon photonic source with integrated 1D free-space beam steering. Opt. Lett. 37, 4257–4259 (2012).

35. Burla, M. Advanced integrated optical beam forming networks for broadband phased array antenna systems, Telecommunication Engineering Faculty of Electrical Engineering, Mathematics and Computer Science. PhD. Thesis, University of Twente (2013).

36. Wang, J. et al. Reconfigurable radio-frequency arbitrary waveforms synthesized in a silicon photonic chip, Nat. Commun. 6, 5957 (2015).

37. Dumais, P. et al. Silicon photonic switch subsystem with 900 monolithically integrated calibration photodiodes and 64-fiber package. J. Lightwave Technol. 36, 233–238 (2018).

38. Tanizawa, K. et al. 32×32 strictly non-blocking Si-wire optical switch on ultra-small die of 11×25 mm2. In Optical Fiber Communications Conference (IEEE, Los Angeles, CA, USA, 2015).

39. Miller, D. A. B. Perfect optics with imperfect components. Optica 2, 747–750 (2015).

40. Gazman, A. et al. Tapless and topology agnostic calibration solution for silicon photonic switches. Opt. Express 26, 347241 (2018).

41. Cheng, Q. et al. First demonstration of automated control and assessment of a dynamically reconfigured monolithic 8 × 8 wavelength-and-space switch. IEEE J. Opt. Commun. Netw. 7, 388–395 (2015).

42. Tait, A. N. et al. Continuous calibration of microring weights for analog optical networks. IEEE Photonics Technol. Lett. 28, 887–890 (2016).

43. Carolan, J. et al. Scalable feedback control of single photon sources for photonic quantum technologies. Optica 6, 335–341 (2019).

44. Tait, A. N. et al. Multi-channel control for microring weightbanks. Opt. Express 24, 8895 (2016).

45. Jiang, H. et al. Chip-based arbitrary radio-frequency photonic filter with algorithm-driven reconfigurable resolution. Opt. Lett. 43, 415–418 (2018).

46. Jayatilleka, H. Automatic configuration and wavelength locking of coupled silicon ring resonators. J. Lightwave Technol. 36, 210–218 (2018).

47. Choo, G. Automatic monitor-based tuning of reconfigurable silicon photonic APF-based pole/zero filters. J. Lightwave Technol. 36, 1899–1911 (2018).

48. Choo, G. Automatic monitor-based tuning of an RF silicon photonic 1X4 asymmetric binary tree true-time-delay beamforming network. J. Lightwave Technol. 36, 5263–5275 (2018).

49. Bin Mohd Zain, M. Z. et al. A multi-objective particle swarm optimization algorithm based on dynamic boundary search for constrained optimization. Appl. Soft Comput. 70, 680–700 (2018).

50. Pérez, D. et al. Thermal tuners on a silicon nitride platform. Preprint at https://arxiv.org/abs/1604.02958 (2016).

Download references

## Acknowledgements

D.P.L. acknowledges funding through the Spanish MINECO Juan de la Cierva program. J.C. acknowledges funding from the ERC Advanced Grant ERC-ADG-2016-741415 UMWP-Chip and ERC-2019-POC-859927. Authors also acknowledge funding from Future MWP technologies and applications PROMETEO/2017/103, Advanced Instrumentation for World Class Microwave Photonics Research IDIFEDER/2018/031, EUIMWP CA16220, Infraestructura para caracterización de Chips Fotónicos EQC2018-004683-P.

## Author information

Authors

### Contributions

D.P.L. and A.L. conceived the control and configuration routines. D.P.L. and J.C. conceived the processor design. D.P.L. designed the chip. D.P.L. and A.L. conceived the experiments, and performed the simulations and measurements. D.P.L. and P.D. supervised the experiments. D.P.L., A.L., and J.C. analyzed the data and wrote the paper. D.P.L., P.D., and J.C. managed, coordinated, and supervised the project.

### Corresponding author

Correspondence to Daniel Pérez-López.

## Ethics declarations

### Competing interests

The authors declare no competing interests.

## Additional information

Peer review information Nature Communications thanks Zhoufeng Ying, Yifei Zhang and Leimeng Zhuang for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

## Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

Reprints and Permissions

## About this article

### Cite this article

Pérez-López, D., López, A., DasMahapatra, P. et al. Multipurpose self-configuration of programmable photonic circuits. Nat Commun 11, 6359 (2020). https://doi.org/10.1038/s41467-020-19608-w

Download citation

• Received:

• Accepted:

• Published:

• DOI: https://doi.org/10.1038/s41467-020-19608-w

## Further reading

• ### A ferroelectric multilevel non-volatile photonic phase shifter

• Jacqueline Geler-Kremer
• Felix Eltes
• Stefan Abel

Nature Photonics (2022)

• ### Thermo-optic phase shifters based on silicon-on-insulator platform: state-of-the-art and a review

• Shengping Liu
• Junbo Feng
• Jin Guo

Frontiers of Optoelectronics (2022)

## Comments

By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.

## Search

### Quick links

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing