Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

# Real-time terahertz imaging with a single-pixel detector

## Abstract

Terahertz (THz) radiation is poised to have an essential role in many imaging applications, from industrial inspections to medical diagnosis. However, commercialization is prevented by impractical and expensive THz instrumentation. Single-pixel cameras have emerged as alternatives to multi-pixel cameras due to reduced costs and superior durability. Here, by optimizing the modulation geometry and post-processing algorithms, we demonstrate the acquisition of a THz-video (32 × 32 pixels at 6 frames-per-second), shown in real-time, using a single-pixel fiber-coupled photoconductive THz detector. A laser diode with a digital micromirror device shining visible light onto silicon acts as the spatial THz modulator. We mathematically account for the temporal response of the system, reduce noise with a lock-in free carrier-wave modulation and realize quick, noise-robust image undersampling. Since our modifications do not impose intricate manufacturing, require long post-processing, nor sacrifice the time-resolving capabilities of THz-spectrometers, their greatest asset, this work has the potential to serve as a foundation for all future single-pixel THz imaging systems.

## Introduction

The information obtained from imaging with THz radiation has generated a great body of research showing potential applications in very diverse areas, see refs. 1,2,3,4 and references therein. Non-invasive THz inspections of semiconductor wafers5 have yielded insight into the photocarrier dynamics of organic solar cells6, observed crystal quality degradation in perovskites under UV illumination7, and measured the conductivity of graphene8 and indium-tin-oxide9 samples. Further, the THz transparency of many common materials has been exploited to reveal sub-subsurface defects in carbon-fiber reinforced composites10 and sub-structures of paintings11. In addition, clinical use of THz imaging is a highly sought after goal as the high-water sensitivity of these non-ionizing waves gives a label-free imaging contrast between healthy and cancerous tissue12 and other afflictions13.

THz-imaging technology, despite showing great application potential, is yet to be employed in the real-world most notably due to high equipment costs and/or needing highly trained operators. The reason for this is, unlike the visible domain where there are megapixel imaging arrays in all modern smartphones, the construction of a THz pixelated-detector array is problematic simply due to a lack of suitable materials; thus most current multipixel THz-detector arrays are narrowband or require cryogenic temperatures14,15, although microbolometer arrays offer great potential as they can detect large bandwidths at room temperature16. In fact, microbolometer arrays have been used to obtain amplitude and phase images at a single THz frequency via the use of digital holography17,18. However, spectral images would require taking multiple images at different frequencies and would not achieve the sub-picosecond temporal resolution granted by THz-spectrometers, a capacity needed for observing ultra-fast dynamics. Although one can use electro-optic THz detection combined with an optical CCD array to map out a THz image19 and circumvent the above problems, this requires a low-repetition rate regenerative amplified Ti:Sapphire laser rendering the entire system expensive, bulky and inflexible.

Recent advances in spatial light modulators have opened the door to alternative imaging technologies, notably the use of single-element detectors in conjunction with spatial encoding masks20,21,22,23,24. In this imaging modality, one encodes a beam of light with a time-varying spatial mask and records the transmission (or reflection) from an object with a single-element detector. Then knowledge of the spatial patterns and the detector readouts are combined to reconstruct an image of the object20,25. Not only THz single-pixel cameras have gathered recent attention26,27,28 as they offer a viable path towards cheap and robust, no-moving-parts THz-imaging systems, thus eliminating the need for linear xy-stages used in other interference-based THz-imaging setups such as reference29, but also because they have been used to study various systems at sub-wavelength resolutions30,31. Namely, a single-pixel THz camera that was used to perform near-field studies of graphene32, revealed micron-sized circuitry defects hidden by silicon33 and even made it possible to study sub-wavelength sized biological matter34. However, these works have all had slow imaging speeds: there is yet to be an explicit investigation into the modulation depth, switch-speeds and software design of such THz single-pixel imaging systems.

Here, we consider and optimize the factors that affect the efficiency of operation in this THz-imaging scheme. We experimentally show the most efficient geometry for the spatial modulator to be a total internal reflection (TIR) configuration. Then, by considering the temporal response of the system, we show that with post-processing one can reach a mask modulation rate of 20 kHz, only limited by the visible-light spatial modulator where otherwise physical phenomena limit us to 6–8 kHz. We further optimize the system by applying a carrier-wave modulation and adjusting the equations for further gains in signal-to-noise without needing a lock-in amplifier. To conclude, we deliberate image undersampling methodologies with fast image reconstruction to reduce the total acquisition time, culminating to the acquisition of a THz video with 32 × 32 resolution and 6 frames per second displayed in real-time using a single-pixel detector. This significantly improves up on the current state-of-the-art which achieved 8 × 8 resolution at 1 frames per second26.

## Results

### Imaging with a spatial THz modulator

To obtain an image with a spatial modulator and some single-pixel detector the following is performed: a beam of radiation is patterned with a time-varying mask and the transmission (or reflection) is simultaneously recorded through an object with a single-element detector. Then knowledge of the temporal-variation of the mask is combined with the temporal-readout of the detector to reconstruct an image of object as follows; if our object has a spatial transmission function ψ(xy) and if at time t our mask had a spatial response described by a(txy), then our detector readout at this time is y(t) = ∫∫ψ(xy)a(txy)dxdy. This idea is most elegantly expressed as a matrix equation

$$Y=A\Psi ,$$
(1)

where the ith entry of Y is our ith detector readout, the ith row of A is the spatial mask a(tixy) reshaped into a 1D vector and Ψ is the 1D vector version of our object’s image. The image is obtained via matrix inversion methods21,23,25,33, and is compatible with compressed sensing algorithms where there are fewer measurements than the number of pixels in the image24,31,35. These ideas are thoroughly discussed in section Undersampling, and the images in “Software Optimization” section were obtained with a fully sampled Paley type-I Hadamard matrix.

For the above idea to be implemented, spatial modulation of a beam of radiation is needed. The most common THz modulators employ conductivity changes in some material for the control of THz radiation. For example, in high resistivity silicon, the Drude plasma frequency is below the THz regime yielding a dielectric material response. However, upon intense optical excitation, the increase of charge carriers moves the Drude plasma frequency above the THz frequencies switching the material response to that of a poor-conductor28,33,36. Further, by spatially patterning the optical pump beam, one can create a spatial THz modulator as the illuminated regions are rendered conductive and the other regions are left transparent. Alternatively, electrical injection/depletion of charge carriers can also be used to this effect37,38. Although an electrical modulator would be preferable as it would not need an optical pump source, hence reducing the system size, and the switch rates would be limited by electronics as opposed to other physical processes (with appropriate design), an optical pump spatial THz modulator is yet easier to be implemented with current technology. In any case, the ideas and methods described in the rest of this work are equally applicable for both electrically and optically controlled THz modulators. However, readers need to be aware that we use an optically controlled THz modulator; high resistivity silicon (>2000 Ω cm, 500-μm-thick) illuminated by a 450 nm continuous-wave (CW) laser diode.

Note, in this work we use a commercial THz time-domain spectrometer (MENLO K15), which uses a pair of fiber-coupled photoconductive antennae as the emitter-receiver pair. An optical delay line changes the temporal arrival times of the femtosecond pulses incident onto the emitter and receiver allowing the measurement of the temporal THz waveform. A DAQ card (NI-USB 6351) reads out the detector and bias state of the emitter instead of the built-in Lock-In amplifier.

### Modulation geometry

Our modulation relies on controlling the conductivity of a material, however the angle of incidence onto the controlled material is also important. Liu et al., derived the Fresnel coefficients for an infinitely thin conductive layer, conductivity σ, in-between two materials of refractive indices n1,237,39:

$${r}_{s}=\frac{{n}_{1}\cos {\theta }_{{i}}-{n}_{2}\cos {\theta }_{{{t}}}-{Z}_{0}\sigma }{{n}_{1}\cos {\theta }_{{{i}}}+{n}_{2}\cos {\theta }_{{{t}}}+{Z}_{0}\sigma },$$
(2a)
$${t}_{s}=\frac{2{n}_{1}\cos {\theta }_{{\rm{i}}}}{{n}_{1}\cos {\theta }_{{{i}}}+{n}_{2}\cos {\theta }_{{{t}}}+{Z}_{0}\sigma },$$
(2b)

where Z0 is the free-space impedance (377 Ω) and θi,t are the incident and transmitted angles, respectively, related to each other via Snell’s law. Here, we only show the s—polarization equations although the p—polarization takes a similar form39. It is obvious that the reflection case can go to zero more easily due to the subtraction of Z0σ in the numerator of Eq. (2a), whereas Eq. (2b) requires much larger changes in Z0σ to make ts tend to zero. With this in mind, an experimental investigation into this phenomenon needs to be carried out.

We study three different modulation geometries: transmission, ordinary reflection and total internal reflection (TIR) as shown in Figs. 1a–c with the angles of incidence on the conductive layer being 8.5°, 8.5° and 30°, respectively. Figure 1d shows our results for the modulation depth, defined as $$M=\frac{{\sum }_{\omega }| {\mathscr{F}}\{{E}_{{\rm{ref}}}(t)-{E}_{{\rm{mod}}}(t)\}| }{{\sum }_{\omega }| {\mathscr{F}}\{{E}_{{\rm{ref}}}(t)\}| }$$, where Eref,mod(t) is our reference and modulated THz fields (Supplementary Note 1) and $${\mathscr{F}}$$ is the Fourier transform, for different excitation powers. Note that the same silicon wafer used in the reflection and transmission measurements was placed on top of the silicon prism for truthful comparison. Overall, as expected all modulation geometries achieve higher modulations with increasing pump power, however they all appear to be saturating at high pump powers (>500 mW cm−2) with transmission, reflection and TIR reaching a maximum modulation of 0.77, 0.57 and 0.91, respectively. The discrepancy between modeling and experiment regarding the saturation behavior is discussed later.

TIR outperforms the other geometries with ordinary reflection being the least efficient for all pump powers. Although from Eqs. (2a) and (2b) one would expect transmission to be the worst, this is not the case because ordinary reflection suffers from the largest insertion losses. In particular, if we have a silicon wafer, as in Fig. 1b, then the first silicon interface will create a preliminary reflection that will be measured as can be seen in Supplementary Fig. 1. This preliminary reflection is not influenced by the photoexcitation of the top silicon interface, hence it appends a large unmodulated THz signal onto our detector. Although we can remove this preliminary reflection in the time-domain, doing so would be misleading in regards to the overall efficiency. Experimental removal of this unwanted pulse by using a thick silicon wafer that spatially separates these two pulses is possible, however this increases insertion losses. Another idea is to modulate this first reflection (i.e. photoexcite the bottom silicon interface in Fig. 1b), however one would be wasting all of the power transmitted into the silicon. The best solution to reducing these insertion losses is to simply change the angle of incidence so that the THz-wave is totally internally reflected at the photoexcited interface. For a silicon-to-air interface, the critical angle is 16.9°, which is not attainable simply by changing the angle of incidence onto a flat silicon wafer. Therefore, we use a silicon prism to achieve the desired angle of incidence as shown in Fig. 1c. This is why TIR performs best: it has the same insertion losses as transmission while achieving a larger modulation depth as predicted by Eq. (2). Although these equations provide an intuitive explanation of the observed phenomenon, they do not provide a complete description of our phenomenon.

We photoexcite charge carriers in silicon with a CW source, and these carriers will diffuse inside the semiconductor with a characteristic length around  ~0.3 mm rendering the infinitely thin conductive layer approximation invalid. Therefore, we split our silicon into a multi-layer structure40, calculate the carrier concentration in each layer taking into account carrier diffusion and then use the Drude-model to calculate the permittivity of each layer (see Supplementary Note 2 for mathematical details). Although we have accounted for most of the relevant physics, we have not taken into account charge-carrier saturation mechanisms such as carrier-carrier screening and increased carrier collision rates at high concentration densities41. This is why modeling predicts higher modulation depths at higher pump powers than observation. A detailed discussion of these photocarrier saturation phenomena would detract from the main aim of this work, namely optimize single-pixel THz-imaging methodologies. Therefore here it is sufficient to acknowledge that they will exacerbate further gains in modulation depth by increasing the pump fluence.

Knowing that the highest modulation depths are achieved in a TIR geometry, we construct our single-pixel THz camera accordingly as shown in Fig. 2; a collimated THz beam passes through an object and an image of the object is projected on the top interface of a silicon prism. Simultaneously we project, via a digital micromirror device (DMD), a spatially patterned 450 nm laser light beam on this silicon interface. As discussed previously, this imparts the spatial pattern in the 450 nm beam to the THz beam, and finally the THz is detected by a single-pixel photoconductive antenna.

### Software optimization

The software part of the system needs to model the temporal response of the physical components and significantly improve the overall SNR preferably without needing long post-processing times. Least-squares fitting algorithms are very fast and they can be used to fit our measured signals to the equations describing the physics of our system. This allows us to adequately account for the component or process with the slowest temporal response associated with it, whether it is the detector response time, the modulator switch rate or the amplification electronics bandwidth for example. In our case, it is switching the silicon’s material response from dielectric to conductor via the photoexcitation of electron–hole pairs, with all other processes and components ignored as they were instantaneous compared to the response of the photocarrier lifetimes. The carrier concentration is described by $$N(t)=B{e}^{-t/\tau }\mathop{\int}\nolimits_{-\infty }^{t}G(t^{\prime} ){e}^{t^{\prime} /\tau }{\rm{d}}t^{\prime}$$ for carrier lifetime τ, carrier generation rate G(t) and arbitrary amplitude constant B. If we say that we switch on our light at t = 0 and turn it off at time t = T, then we get

$$N(t)=\left\{\begin{array}{ll}B(1-{e}^{-t/\tau })\hfill&{\text{for}}\,0\le t\le T\\ B(1-{e}^{-T/\tau}){e}^{-(t-T)/\tau }&\hskip -1.2pc {\text{for}}\,t\, > \, T\end{array}\right..$$
(3)

Knowledge of this needs to be combined when processing Eq. (1) in order to reconstruct our image. The usual processing of Eq. (1) requires the length of Y to equal the number of rows in A, namely one measurement for each projected spatial mask. Given that we change the masks at regular periods T then the temporal response for each mask will be given by Eq. (3). Therefore, we can fit this equation to our measurement using B as the fitting parameter, as we know τ, obtaining an estimate for the mask amplitude-value at t τ. This estimated value can then be inputted into Eq. (1) for image reconstruction. For this, we need to find all the B values that describe the temporal-segments of each individual mask (see Supplementary Note 3 for fast calculation methodologies). The calculation of these values takes into account the system’s time-response, therefore compared with an averaging or integrating processing approach this method will give a better estimate when the masks have been switched at a rate comparable to τ.

In Fig. 3a, we show the signals measured with our DAQ card and the reconstructed least-squares fits to those signals for mask switch rates of 2, 5, 10 and 20 kHz, noting that the optical delay line was kept fixed at the max of the THz field cycle. The silicon used had a lifetime of τ = 250 μs resulting in a switch rate limit of around 3–5 kHz, thus only the 2 kHz switch rate reached a near-stable value as can be seen in Fig. 3a. To test our algorithm’s ability to predict the final-equilibrium value while measuring on timescales shorter than τ, we compare the reconstructed images using the values from our algorithm and averaging the signals over each mask duration. We image two metallic lines placed in the middle of a Gaussian THz-beam profile. The resulting signal-to-noise ratio (SNR), defined as the mean value of the transmissive areas divided by the standard deviation of the opaque areas (Supplementary Fig. 2), is shown in Fig. 3b as a function of mask switch rate. The least-squares fitting algorithm and the averaging approach both start off with similar SNRs, however as the switch rate increases the averaging approach experiences a much sharper decrease in SNR compared to the least-squares algorithm. Fitting S = aRb to the SNR, S, and switch rate, R, reveals a = 40(60) and b = 0.91(0.44) for the averaging (least-squares) approaches. In other words, if the mask projection periods are on timescales comparable to the system’s temporal response, taking the mean signal-value during each mask periods results in a linear drop in SNR with switch rate. Whereas mathematically accounting for the temporal behavior results in a square-root decrease. In the end, our proposed technique demonstrates that we can obtain an image at a 20 kHz mask modulation rate, only limited by the DMD switch-speeds, whereas averaging approaches are limited to a maximum modulation rate of 6–8 kHz due the physical processes in our system. However, it needs to be mentioned that this is only meant to demonstrate how to use post-processing to overcome switch rate limitations imposed by physical phenomena as the actual signals used were an average of 16 measurements to remove the various noise sources in our system. Applying a carrier-wave modulation to the emitter and modifying the equations can be used to reduce noise, as shown in Supplementary Note 5.

### Undersampling

Undersampling techniques are often used in single-pixel imaging modalities to reduce the acquisition time. Compressed sensing35 is a technique used to reduce the number of measurements needed to image an object, i.e. undersample the object. It works by directly measuring a sparse representation of an object and trying to recover the image with optimization algorithms, which typically require computational times that prevent real-time display of the images. Fortunately, quick-image reconstruction techniques from undersampled data do exist. Namely, partially measuring the Fourier spectrum of an object by projecting sinusoidal stripes of known spatial frequency, and then obtaining the image via inverse Fourier Transform22,24,42. Alternatively, one can calculate a pseudoinverse matrix A−1, store it in memory and obtain the image via fast matrix multiplication Ψ = A−1Y43.

The Fourier transform undersampling technique22,24,42 has the benefit that most images of interest are sparse in the spatial frequency domain, thus accurate image recovery is obtained from a small number of Fourier coefficients. However, measuring the coefficients requires the projection of sinusoidal stripes, in other words masks with greyscale values. DMDs are inherently limited to being either on or off, 1s and 0s, where the projection of greyscale values is obtained by temporal dithering at the expense of reducing the mask switch rate24,44. Spatial dithering to achieve values between 1 and 0 introduces quantization errors42,44, thus this method is not optimal when implemented with DMDs.

Pre-calculating a reconstruction matrix and obtaining the image via fast matrix multiplication allows free selection of the projected masks. However, simply calculating the pseudoinverse creates undersampling artefacts and lower stability with noise. Fortunately, Czajkowski et al.43 developed a theory that allows for the calculation of a pseudoinverse matrix that also includes a set of spatial filters that regularize the image, resulting in images of similar quality to the slow L1 minimization algorithms43.

THz modulators are still in their infancy of being developed prior to commercialization. Here, as demonstrated in “Modulation geometry” section, THz modulation is achieved via the generation of charge carriers in silicon via the photoexcitation of silicon and a DMD is used to spatially pattern the optical pump beam. Therefore we need to use binary masks to achieve the quickest acquisition rates. Masks derived from the Hadamard transform have been shown to have higher noise robustness compared to random masks in the THz regime33, and are inherently binary. Their noise robustness arises as they are orthogonal and have the property of minimizing the mean squared error in all the image pixels25. Although this noise robustness property is also shared with the Fourier masks, we chose the Hadamard basis due to its binary nature.

Hadamard matrices have values of either +1 or −1 with the property that the rows are orthogonal to one another. Usually one uses the Sylvester construction to create a Hadamard matrix, which yields masks of different spatial frequencies as shown in Supplementary  Note 6. It is then necessary not to omit important low spatial-frequency masks, which requires prior knowledge of the imaging scene. Fortunately, alternative construction techniques of Hadamard matrices exist; namely the Paley construction method. Here a cyclic construction is used where each row is obtained by shifting the row above it45. This results in masks that are simply shifted from one another as shown in Supplementary Fig. 4. Therefore, all these masks have similar spatial frequencies, hence no need for special selection of the important masks.

We use masks constructed from a Paley type-I Hadamard matrix which has values of 1s and −1s, whereas we can only project 1s and 0s. Adding a secondary differential measurement for each mask allows the correct encoding to be obtained, as shown in ref. 46, which does increase the SNR at the expense of doubling the number of measurements33. In Fig. 4, we compare the performance of [1 0] and [1 −1] masks by plotting the similarity structure index (SSIM) as we increase the sampling to image-pixels ratio. Looking at the [1 0] masks, we see that the SSIM begins to rise with some oscillations and then saturates at a value around 0.7 once the sampling ratio becomes above 40%. The reason for this saturation is that adding more measurements becomes unnecessary to construct a better image, however noise in the measurements prevent the SSIM from improving. The differential [1 −1] masks reach a higher SSIM in the end, however the undersampling oscillations occur until a sampling ratio of 80% is reached. The increase in SNR at the end is due to the differential measurement having superior noise robustness, however doubling the measurements means the undersampling artifacts last for twice as long. These results show that the use of [1 0] masks with 40% sampling ratio is the optimum for our system.

### Application

The culmination of the ideas in this work, namely the modulation geometry, software processing and undersampling, pave the way for a rapid THz spectroscopic imaging system without incurring great cost or complexity. In the Supplementary Video 1, we show the real-time THz image reconstructed as we move a metal line around the field-of-view (the delay line was fixed at the peak of the THz field). The displayed image has a resolution of 32 × 32 pixels, and the achieved number of frames per second is around 6. The mask switch rate was 4 kHz, meaning with a 40% sampling ratio we should expect around 10 frames per second; however, for each image there is  ~50 ms of waiting time needed to synchronize the DMD, DAQ card and the THz delay line. This waiting time can be eradicated with a more integrated system design.

To ensure that our approach does not obstruct the ability of measuring spectroscopic THz images, in Supplementary Note 7 we image an object consisting of four materials: air, metal, 210 μm and 420-μm-thick plastic. For spectroscopic imaging, however, the full temporal waveform at each image pixel needs to be recorded, or equivalently images need to be acquired at every temporal point of the THz-pulse cycle. This results in 3D data, two xy-dimensions and one temporal dimension, which is shown in the Supplementary Video 2 (time of the image is shown as the vertical dashed line on the THz pulse below the image). From these data, the obtained transmission and phase delay values are what we expect as shown in the Supplementary Note 7. Therefore, this confirms that the undersampling and data processing do not have any negative effects on spectroscopic THz imaging. See ref. 5 for a basic overview on THz data analysis. Note that this does increase the total acquisition time due to the necessity of recording images at many temporal points, with the increase being linearly proportional to the number of time points needed to be sampled. This unfortunately makes the acquisition of a spectroscopic THz image in real-time more difficult, however temporal undersampling of the THz waveform47 reduces this problem.

To demonstrate an application of this technique we track hydration changes in a leaf, from an Achyranthes aspera plant, as it is illuminated by an intense white-light source without access to water. As the illumination is too strong for the leaf, it experiences high oxidative stress resulting in a loss of chlorophyll48. The loss of chlorophyll after the experiment can clearly be seen in Fig. 5a. In Fig. 5b–h (i–o), we show the THz transmission (phase delay) images as the leaf experiences photo-damage. In the first transmission and phase delay images, Fig. 5b, i, we can see the main leaf vein, which appears as white/green color in the transmission and the phase delay images, corresponding to low transmission and large phase delay. The reason is that the leaf veins are thicker than the rest of the leaf and also transport water, thus the increased absorption and phase delay. Then, as the leaf becomes photo-damaged, we can see the phase delay decrease and the transmission increase in the photo-damaged area. This is because the damaged area becomes thinner under photo-oxidative damage, which results in lower phase delay and increased transmission. The thinning of the leaf is because under intense optical illumination, the chloroplasts inside the cell collapse reducing the overall plant size49. Comparing the transmission and phase images, we see that the phase images give clearer contrast of the veins. This suggests that there is higher water content near the veins whereas the leaf thickness remains the same. Finally, the phase delay inside the vein also decreases over time. This is because the leaf is running out of water causing the leaf to shrink50. This shows we are able to track very subtle hydration changes in vivo.

## Discussion

This work optimizes single-pixel THz cameras, where a photoconductive THz emitter and detector pair was used, and the spatial THz modulator shines spatially patterned visible light on silicon. The spatial control of THz is of critical importance, thus we show that a total internal reflection modulation geometry achieves the lowest insertion losses and highest modulation depth. This relaxes the modulator parameters, which allows for a reduction in total cost without reducing the efficiency. Every system has a temporal response, which can be exploited to our advantage. In our system, the photoexcitation of silicon with a CW source has the slowest response, hence we decrease noise by fitting our measurements to the relevant photocarrier equations. With the fitting approach, we are able to demonstrate successful imaging with a modulation speed of 20 kHz, only limited by the DMD switch-speeds, compared to 8 kHz for an averaging approach. Next, we further improve acquisition speeds by undersampling, however the typical compressed sensing algorithms involve complex minimization algorithms preventing real-time image display. For this reason, we use a partially sampled Hadamard matrix along with a regularized image reconstruction matrix to reduce computational times, finding a 40% sampling ratio using [1 0] Hadamard masks to be optimum here. This work executes alternative ideas to the previously demonstrated single-pixel THz imaging works achieving 32 × 32 resolution with  ~6 frames per second, greatly outperforming the previous state-of-the-art of 8 × 8 resolution at 1 frame per second26. We demonstrate a possible biological application where we are able to track photo-induced damage in a leaf as well as subtle hydration changes in the non-damaged regions in vivo.

Future work will focus on obtaining sub-wavelength resolution by limiting carrier diffusion via the creation of micro-sized silicon pillars and putting the object in the near-field regime. Simultaneously, there will be an effort to reduce noise by employing a secondary photodiode to measure the fiber-laser power fluctuations. Further increases in acquisition speeds will be obtained by exploiting the temporal sparsity of THz pulses for further undersampling as well as achieving more efficient synchronization between the system’s components. This works opens up the possibility of rapid THz-spectroscopy imaging systems at commercially viable prices without any complex manufacturing or by having to sacrifice the spectroscopic capacities of THz–TDS systems. Further, the work presented here could be used to design no-moving parts imaging systems that are based on the self-interference properties of THz quantum cascade lasers, such as those in reference29, by replacing the linear xy-stage with a spatial light modulator.

## Data availability

The raw experimental data, in MATLAB data format, and relevant MATLAB processing scripts needed to reproduce Fig. 4 can be obtained on Figshare https://doi.org/10.6084/m9.figshare.11955327. The data and scripts for any other results shown in this work can be obtained by contacting the corresponding author.

## References

1. 1.

Mittleman, D. M. Twenty years of terahertz imaging [Invited]. Opt. Express 26, 9417–9431 (2018).

2. 2.

Guerboukha, H., Nallappan, K. & Skorobogatiy, M. Toward real-time terahertz imaging. Adv. Opt. Photonics 10, 843–938 (2018).

3. 3.

Jepsen, P. U., Cooke, D. G. & Koch, M. Terahertz spectroscopy and imaging—modern techniques and applications. Laser Photonics Rev. 5, 124–166 (2011).

4. 4.

Jansen, C. et al. Terahertz imaging: applications and perspectives. Appl. Opt. 49, E48–E57 (2010).

5. 5.

Ulbricht, R., Hendry, E., Shan, J., Heinz, T. F. & Bonn, M. Carrier dynamics in semiconductors studied with time-resolved terahertz spectroscopy. Rev. Mod. Phys. 83, 543–586 (2011).

6. 6.

Lane, P. A., Cunningham, P. D., Melinger, J. S., Esenturk, O. & Heilweil, E. J. Hot photocarrier dynamics in organic solar cells. Nat. Commun. 6, 7558 (2015).

7. 7.

Sun, Q. et al. Highly sensitive terahertz thin-film total internal reflection spectroscopy reveals in situ photoinduced structural changes in methylammonium lead halide perovskites. J. Phys. Chem. C 122, 17552–17558 (2018).

8. 8.

Docherty, C. J. & Johnston, M. B. Terahertz properties of graphene. J. Infrared Millim. Terahertz Waves 33, 797–815 (2012).

9. 9.

Chen, X., Parrott, E. P. J., Huang, Z., Chan, H.-P. & Pickwell-MacPherson, E. Robust and accurate terahertz time-domain spectroscopic ellipsometry. Photonics Res. 6, 768–775 (2018).

10. 10.

Dong, J. et al. Visualization of subsurface damage in woven carbon fiber-reinforced composites using polarization-sensitive terahertz imaging. NDT E Int. 99, 72–79 (2018).

11. 11.

Dong, J. et al. Terahertz frequency-wavelet domain deconvolution for stratigraphic and subsurface investigation of art painting. Opt. Express 24, 26972–26985 (2016).

12. 12.

Yu, C. C., Fan, S., Sun, Y. & Pickwell-MacPherson, E. The potential of terahertz imaging for cancer diagnosis: a review of investigations to date. Quatit. Imag. Med. Surg. 2, 33–45 (2012).

13. 13.

Son, J.-H. Terahertz Biomedical Science & Technology (CRC Press, Boca Raton, 2014).

14. 14.

Escorcia, I., Grant, J., Gough, J. & Cumming, D. R. S. Uncooled CMOS terahertz imager using a metamaterial absorber and pn diode. Opt. Lett. 41, 3261–3264 (2016).

15. 15.

Rogalski, A. & Sizov, F. Terahertz detectors and focal plane arrays. Opto-Electron. Rev. 19, 346–404 (2011).

16. 16.

Amanti, M. I., Scalari, G., Beck, M. & Faist, J. Stand-alone system for high-resolution, real-time terahertz imaging. Opt. Express 20, 2772–2778 (2012).

17. 17.

Locatelli, M. et al. Real-time terahertz digital holography with a quantum cascade laser. Sci. Rep. 5, 13566 (2015).

18. 18.

Yamagiwa, M. et al. Real-time amplitude and phase imaging of optically opaque objects by combining full-field off-axis terahertz digital holography with angular spectrum reconstruction. J. Infrared Millim. Terahertz Waves 39, 561–572 (2018).

19. 19.

Usami, M. et al. Development of a THz spectroscopic imaging system. Phys. Med. Biol. 47, 3749–3753 (2002).

20. 20.

Edgar, M. P., Gibson, G. M. & Padgett, M. J. Principles and prospects for single-pixel imaging. Nat. Photonics 13, 13–20 (2019).

21. 21.

Sun, B. et al. 3D computational imaging with single-pixel detectors. Science 340, 844–847 (2013).

22. 22.

Zhang, Z. et al. Simultaneous spatial, spectral, and 3D compressive imaging via efficient Fourier single-pixel measurements. Optica 5, 315–319 (2018).

23. 23.

Welsh, S. S. et al. Fast full-color computational imaging with single-pixel detectors. Opt. Express 21, 23068–23074 (2013).

24. 24.

Zhang, Z., Ma, X. & Zhong, J. Single-pixel imaging by means of Fourier spectrum acquisition. Nat. Commun. 6, 6225 (2015).

25. 25.

Harwit, M. & Sloane, N. J. A. Hadamard Transform Optics (Academic Press, 1979).

26. 26.

Watts, C. M. et al. Terahertz compressive imaging with metamaterial spatial light modulators. Nat. Photonics 8, 605–609 (2014).

27. 27.

Chan, W. L. et al. A single-pixel terahertz imaging system based on compressed sensing. Appl. Phys. Lett. 93, 121105 (2008).

28. 28.

Shrekenhamer, D., Watts, C. M. & Padilla, W. J. Terahertz single pixel imaging with an optically controlled dynamic spatial light modulator. Opt. Express 21, 12507–12518 (2013).

29. 29.

Lim, Y. L. et al. Coherent imaging using laser feedback interferometry with pulsed-mode terahertz quantum cascade lasers. Opt. Express 27, 10221–10233 (2019).

30. 30.

Chen, S.-C. et al. Terahertz wave near-field compressive imaging with a spatial resolution of over λ/100. Opt. Lett. 44, 21–24 (2019).

31. 31.

Stantchev, R. I. et al. Compressed sensing with near-field THz radiation. Optica 4, 989–992 (2017).

32. 32.

Hornett, S. M., Stantchev, R. I., Vardaki, M. Z., Beckerleg, C. & Hendry, E. Subwavelength terahertz imaging of graphene photoconductivity. Nano Lett. 16, 7019–7024 (2016).

33. 33.

Stantchev, R. I. et al. Noninvasive, near-field terahertz imaging of hidden objects using a single-pixel detector. Sci. Adv. 2, e1600190 (2016).

34. 34.

Stantchev, R. I. et al. Subwavelength hyperspectral THz studies of articular cartilage. Sci. Rep. 8, 6924 (2018).

35. 35.

Eldar, Y. C. & Kutyniok, G. Compressed Sensing: Theory and Applications (Cambridge University Press, Cambridge, 2012).

36. 36.

Alius, H. & Dodel, G. Amplitude-, phase-, and frequency modulation of far-infrared radiation by optical excitation of silicon. Infrared Phys. 32, 1–11 (1991).

37. 37.

Liu, X. et al. Graphene based terahertz light modulator in total internal reflection geometry. Adv. Opt. Mater. 5, 1600697 (2017).

38. 38.

Sun, Y. et al. Graphene-loaded metal wire grating for deep and broadband THz modulation in total internal reflection geometry. Photonics Res. 6, 1151–1157 (2018).

39. 39.

Liu, X., Parrott, E. P. J., Ung, B. S.-Y. & Pickwell-MacPherson, E. Exploiting total internal reflection geometry for efficient optical modulation of terahertz light. APL Photonics 1, 076103 (2016).

40. 40.

Furman, Sh. A. & Tikhonravov, A. V. Basics of Optics of Multilayer Systems (Frontière, Gif-sur-Yvette, 1992).

41. 41.

Hendry, E., Koeberg, M., Pijpers, J. & Bonn, M. Reduction of carrier mobility in semiconductors caused by charge-charge interactions. Phys. Rev. B Condens. Matter Mater. Phys. 75, 233202 (2007).

42. 42.

Zhang, Z., Wang, X., Zheng, G. & Zhong, J. Hadamard single-pixel imaging versus Fourier single-pixel imaging. Opt. Express 25, 19619–19639 (2017).

43. 43.

Czajkowski, K. M., Pastuszczak, A. & Kotyński, R. Real-time single-pixel video imaging with Fourier domain regularization. Opt. Express 26, 20009 (2018).

44. 44.

Zhang, Z., Wang, X., Zheng, G. & Zhong, J. Fast Fourier single-pixel imaging via binary illumination. Sci. Rep. 7, 12029 (2017).

45. 45.

Paley, R. E. A. C. On orthogonal matrices. J. Math. Phys. 12, 311–320 (1933).

46. 46.

Davis, D. S. Multiplexed imaging by means of optically generated Kronecker products: 1 The basic concept. Appl. Opt. 34, 1170–1176 (1995).

47. 47.

He, Y., Parrott, E. P. & Pickwell-Macpherson, E. Adaptive sampling for terahertz time-domain spectroscopy and imaging. IEEE Trans. Terahertz Sci. Technol. 7, 118–123 (2017).

48. 48.

Havaux, M., Bonfils, J.-P., Lütz, C. & Niyogi, K. K. Photodamage of the photosynthetic apparatus and its dependence on the leaf developmental stage in the npq1 Arabidopsis mutant deficient in the xanthophyll cycle enzyme violaxanthin de-epoxidase. Plant Physiol. 124, 237–284 (2000).

49. 49.

Izumi, M., Ishida, H., Nakamura, S. & Hidema, J. Entire photodamaged chloroplasts are transported to the central vacuole by autophagy. Plant Cell 29, 377–394 (2017).

50. 50.

Scoffoni, C., Vuong, C., Diep, S., Cochard, H. & Sack, L. Leaf shrinkage with dehydration: coordination with hydraulic vulnerability and drought tolerance. Plant Physiol. 164, 1772–1788 (2014).

## Acknowledgements

This work was partially supported by the Research Grants Council of Hong Kong (Project Numbers 14206717, 14201415 and AoE/M-05/12), The Hong Kong Innovation and Technology Fund (Project Number ITS/371/16), The Engineering and Physical Sciences Research Council (Grant Number EP/S021442/1), National Natural Science Foundation of China (project number 51777023) and the Royal Society Wolfson Merit Award (E.P.M.). We thank Xudong Liu for providing suitable silicon samples and helpful discussions along with Edward P. J. Parrot.

## Author information

Authors

### Contributions

R.I.S., T.B. and E.P.-M. conceived the idea. R.I.S. created the experimental setup and programmed all equipment. T.B. designed the least-squares fitting algorithm. X.Y. designed the undersampling procedures. R.I.S. performed the experiments and data analysis. R.I.S. wrote the manuscript and all other authors provided editorial input.

### Corresponding author

Correspondence to Rayko Ivanov Stantchev.

## Ethics declarations

### Competing interests

The authors declare no competing interests.

Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

## Rights and permissions

Reprints and Permissions

Stantchev, R.I., Yu, X., Blu, T. et al. Real-time terahertz imaging with a single-pixel detector. Nat Commun 11, 2535 (2020). https://doi.org/10.1038/s41467-020-16370-x

• Accepted:

• Published:

• ### Improving the performance of ghost imaging via measurement-driven framework

• Hanqiu Kang
• , Yijun Wang
• , Ling Zhang
•  & Duan Huang

Scientific Reports (2021)

• ### Preface to the special issue on “Terahertz Science and Applications”

• Xinliang Zhang
•  & Xiaojun Wu

Frontiers of Optoelectronics (2021)