Abstract
Microfluidics by soft lithography has proven to be of key importance for biophysics and life science research. While being based on replicating structures of a master mold using benchtop devices, design modifications are time consuming and require sophisticated cleanroom equipment. Here, we introduce virtual fluidic channels as a flexible and robust alternative to microfluidic devices made by soft lithography. Virtual channels are liquidbound fluidic systems that can be created in glass cuvettes and tailored in three dimensions within seconds for rheological studies on a wide size range of biological samples. We demonstrate that the liquidliquid interface imposes a hydrodynamic stress on confined samples, and the resulting strain can be used to calculate rheological parameters from simple linear models. In proofofprinciple experiments, we perform highthroughput rheology inside a flow cytometer cuvette and show the Young’s modulus of isolated cells exceeds the one of the corresponding tissue by one order of magnitude.
Similar content being viewed by others
Introduction
Phenotyping of cells utilizing intrinsic material properties, i.e., elasticity and viscosity, is increasingly being recognized to be of key relevance in basic and applied life science research^{1,2,3}. Early developments have mainly been driven by technologies like atomic force microscopy^{4}, micropipette aspiration^{5} as well as optical stretching^{6,7} and focused on the fundamental interplay between cytoskeletal protein structure and viscoelastic cell properties to combine physics and biology on a molecular as well as cellular scale^{8,9,10}. In this field, mechanosensitivity has been found as an essential mechanism of how cells respond to and communicate with their environment^{11}.
The great success of mechanical phenotyping to study cell function paved the way toward applications in translational research but required an elevated sample throughput that could not be reached by established methods. One answer to this challenge was found in microfluidic devices^{12,13,14}. Already decades ago, Hochmuth et al. utilized glass capillaries and highspeed video microscopy to study red blood cell deformation in flow^{15,16,17}. In their pioneering work they carried out an extensive characterization of erythrocyte shape, orientation and viscosity. Glass capillaries share the advantages of all microfluidic systems, i.e., highthroughput and serial sample processing capabilities, but lack the flexibility to design and implement sophisticated fluid flows.
The introduction of soft lithography as a rapid prototyping technology revolutionized the way of creating microfluidic structures^{18,19}. Using replicas of elastomers enabled benchtop production of labonachip devices to access the nano and microscale for single molecule and singlecell experiments^{20,21,22,23}. For example, Gossett et al. demonstrated highspeed mechanical phenotyping of various cell lines and showed for embryonic stem cells a discrimination of their pluripotent state with sufficient statistical power^{24}. The idea of stretching cells in an extensional flow has been expanded by Dudani et al. toward a pinchedflow geometry, where hydraulic circuit design is used to deform cells in multiple stretching modes^{25}. Recently, mechanical cell characterization has also been complemented with realtime data analysis^{26,27} as well as fluorescent labeling to combine the sensitivity of intrinsic material properties with the specificity of molecular markers^{28}.
While labonachip devices are nowadays routinely being used in translational research to assess viscoelastic properties, e.g., for studying the onset of infectious diseases^{29} and for monitoring patients’ status over time^{30,31}, the highthroughput analysis of this labelfree biomarker is currently limited to single cells and excludes multicellular structures. However, a detailed understanding of how mechanics impacts on tissue development and homeostasis would be highly relevant to establish 3D cell culture models that incorporate material properties into the field of tissue engineering^{32,33}. Despite some initial work on spheroids using atomic force microscopy and micropipette aspiration current approaches lack the potential of simultaneous highthroughput characterization of cells and tissues applying a single experimental method^{34,35}.
A suitable microfluidic system for highspeed mechanical phenotyping of spheroids is a glass cuvette. Having a diameter of several hundred of micrometers these cuvettes are the main entity in fluorescencebased flow cytometers, where translocating cells are analyzed by laser excitation and detection of the emitted as well as the scattered light^{36}. While providing sufficient confinement for spheroids, commercial flow cytometers are not capable to analyze single cells by their mechanical properties. One reason is found in the large crosssectional area of the cuvette, which is needed to reduce blocking by debris but also results in low hydrodynamic stress amplitudes. Since determination of elasticity and viscosity requires, first, exposure of cells to sufficient shear as well as normal stresses and, second, detection of the corresponding cellular deformation, the large cuvette diameter effectively inhibits mechanical measurements.
Here, we introduce virtual fluidic channels to create microfluidic constrictions of variable crosssections inside glass cuvettes of commercial flow cytometers. Virtual channels are liquidbound microfluidic devices and are formed by coflowing aqueous polymer solutions at low Reynolds numbers where a stabilizing sheath confines a sample flow between immiscible liquid phases. We demonstrate that virtual fluidic channel dimensions can be adjusted within seconds in realtime and enable highthroughput rheological measurements of biological samples of both, cells and spheroids.
Taking advantage of a simple scaling law defining a channel diameter, which depends on flow rates and viscosity but not on polymer composition, we investigate suspended cells in different degrees of virtual confinement. In contrast to bulletlike cells found in Poiseuille flows our results reveal a characteristic shape resembling an ellipsoid. This steadystate can be explained by a hydrodynamic stress originating from the viscosity mismatch at the liquid–liquid interface and we show its utilization for simple creepcompliance experiments that allow for an extraction of material properties.
We develop an analytical model and compare the interfacial stress to typical shear and normal stress distributions inside Poiseuille flows of laminar systems. Our results verify that cell deformation of small objects embedded in virtual channels inside large geometries, e.g., single cells in cuvettes, is governed by interfacial stress, while large objects, e.g., spheroids as a tissue model system in glass cuvettes, deform dominantly by shear stress.
We combine our technology with realtime deformability cytometry (RTDC) for highthroughput characterization of biological samples. In proofofprinciple experiments we show that virtual channels can be applied to perform mechanical cell assays and to identify cytoskeletal alterations labelfree. Finally, we investigate the role of singlecell mechanics for tissue stability. Virtual channels allow for direct comparison between the rheological properties of single cells and the corresponding tissues. Our results indicate that the elastic modulus of cells exceeds the one of tissue by an order of magnitude, while tissue stiffness increases with size.
Results
Virtual fluidic channels in microfluidic systems
Virtual channel formation is first demonstrated inside a polydimethylsiloxane (PDMS) microfluidic chip with a squared constriction of 30 µm × 30 µm crosssection and 300 µm length (Fig. 1a, upper half and Supplementary Fig. 1A). Confining a sample solution of 57 µM methylcellulose (MC) inside a sheath flow of 50 mM polyethylene glycol (PEG) 8000, both in PBS, leads to an interface, which is stable and immiscible on the experimental time scale (Supplementary Fig. 2 and Supplementary Movie 1). Inside the constriction both aqueous phases can be distinguished optically by a refractive index difference at the liquid–liquid interface that we use to define the width w of the virtual channel (Fig. 1a, top inset, white dashed line and Supplementary Movie 2). Finite element method (FEM) simulations of the full microfluidic geometry assuming a twophase Stokes flow reveal the same binary concentration distribution of MC and PEG (Fig. 1a, lower half).
While the greater dynamic viscosity of the PEG solution effectively impedes flow and acts as a liquid wall inside the PDMS geometry, the MC phase with its lower viscosity tunnels through this confinement (Fig. 1a, top inset). The velocity profile is described by the superposition of two parabolic functions, for the inner and outer aqueous phase (Fig. 1b, blue and red dashed line), respectively^{37}. The velocity gradient of the resulting piecewisedefined Poiseuille flow (Fig. 1b, black circles) is given by the viscosity mismatch of both polymer solutions (Fig. 1c) where the MC phase corresponds to an effective (virtual) channel size smaller than the crosssection of the PDMS chip.
We investigated the impact of flow rate and viscosity on virtual channel width as these parameters allow for a precise adjustment of the liquid–liquid interface. Analyzing different polymers of various chain lengths and concentrations we confirm a simple functional relationship reported earlier^{38,39}:
where Q_{sa} and Q_{sh} are the flow rates of sample as well as sheath, η_{sa} and η_{sh} are the corresponding viscosities and \(\tilde w\) is the channel width relative to the diameter of the PDMS constriction (see Methods). The viscosity of sample solution is derived from a power law utilizing experimental shear rates \(\dot \gamma\) while our sheath solution follows a Newtonian behavior (Fig. 1c, see Methods).
The fact, that the relative virtual channel width is only determined by the flow rate and viscosity ratios at the respective shear rates, qualifies welldefined flow conditions unconstrained by polymer length, concentration and the microfluidic chip (Fig. 1d). Considering the nonlinear rheological properties of MC revealing a pronounced shearthinning component, this simple relationship is unexpected in a complex hydrodynamic environment of coflowing aqueous phases.
Cell mechanical phenotyping in virtual channels
Next, we study the capability of virtual channels as a confining constriction for probing mechanical properties of suspended cells. Using the myeloid precursor cell line HL60, RTDC is performed in a standard PDMS chip of 20 µm × 20 µm crosssection^{26} and results are compared with measurements inside a virtual channel of 21 µm width formed in a larger 30 µm x 30 µm chip (see Methods). Mechanical phenotyping in both, plastic chip and virtual channel, reveals similar distributions in cell size and deformation (Fig. 2a, b), cells display the typical bullet shape (Fig. 2a, b, insets) and only slightly perturb the MCPEG interface (Fig. 2c).
Sensitivity of our system toward cytoskeletal modifications has been assessed by exposing HL60 cells to 1 µM cytochalasin D (CytoD, see Methods). For cells inside a PDMS channel the depolymerization of filamentous actin reveals the expected increase in deformation d from d = 0.062 ± 0.016 (median ± std. dev.) for the control sample and d = 0.062 ± 0.015 for the vehicle control of 0.25% (v/v) dimethyl sulfoxide (DMSO) to d = 0.080 ± 0.030 for the 1 µM CytoD treatment (Fig. 2a). Virtual channel measurements agree with these results and yield d = 0.059 ± 0.015 (control), d = 0.065 ± 0.015 (vehicle control of 0.25% (v/v) DMSO) as well as d = 0.087 ± 0.023 (1 µM CytoD) where flow rates have been adjusted to match the stress distribution on the cell surface inside the PDMS chips (Fig. 2b and Supplementary Fig. 3).
A statistical analysis of three experimental replicates summarizes more than 20,000 singlecell measurements and confirms in both systems the expected significant increase in cell deformation and decrease in Young’s modulus E relative to the vehicle control and control when cells are being exposed to 1 µM CytoD (Fig. 3, Supplementary Figs. 4 and 5). Importantly, we find no significant differences in deformation and Young’s modulus E comparing results in PDMS and virtual channels. In contrast, a significant decrease in cell size is found when cells are confined by a MCPEG interface. This observation can be attributed to the geometry of our microfluidic chip having a sheath current from two sides, both connected to the same inlet. The corresponding virtual channel is always aligned in the center of the constriction (Fig. 1a) confining the cells perpendicular to one direction of flow only and leaving the channel height of 30 µm unaltered (Fig. 1a, bottom inset).
Utilizing FEM simulations, we investigate the impact of a nonsquared channel crosssection on the hydrodynamic stress distribution. While a 20 µm × 20 µm PDMS channel leads to a mean shear stress on the cell surface of 970 Pa (Supplementary Fig. 3, left), we find 908 Pa for a virtual channel having 21 µm width and a 30 µm height (Supplementary Fig. 3, right). With a difference below 10% our calculations suggest comparable microfluidic conditions, a conclusion which is supported by experimental results (Fig. 3).
Cell mechanics in mesofluidic systems
In a following step, we transfer our experimental framework to mesoscopic geometries on the centimeter scale. This approach would facilitate microfluidic assays controlled by flow rates and viscosities, fully unconstrained by (soft) lithography and other fabrication techniques. As a proofofprinciple experiment we use a standard flow cytometer glass cuvette of 2 cm length (Fig. 4a and Supplementary Fig. 1b). Although exceeding dimensions of standard microfluidic chips by almost two orders of magnitude, a stable virtual channel of circular crosssection can be formed inside a squared constriction of 360 µm side length (Supplementary Fig 6). The existence of two steady coflowing aqueous solutions can be predicted from FEM simulations on the full flow profile (Fig. 4b) and has been confirmed by experimental data (Fig. 4c).
Adapting Eq. (1) to the cuvette geometry demonstrates that the virtual constriction can be controlled by sample and sheath flow rates as well as viscosities (see Methods):
where the channel diameter w can be adjusted between a few and more than one hundred micrometers (Fig. 4b, c). Here, \(\tilde w\) is determined relative to the side length of the cuvette crosssection.
Having a dynamic size range exceeding one order of magnitude our microfluidic system can be applied to mechanically characterize cells in their reference state, i.e., in large virtual channels at low hydrodynamic stress (Fig. 4c, top) and under a finite hydrodynamic stress in narrow virtual channels (Fig. 4c, bottom)^{27}. Interestingly, the sheath inside the constriction of the glass cuvette fully encloses the sample and enables a true threedimensional cell confinement (Fig. 4b and Supplementary Fig. 7) and a homogeneous stress distribution on the cell surface mimicking the axial symmetric velocity profile (Supplementary Fig. 7, left panel). This is in contrast to standard PDMS chips, where virtual channels are limited to 2.5 dimensions with fixed feature heights given by the planar geometry of the master mold (Fig. 1a, bottom inset and Supplementary Fig. 7, right panel; see Methods). The different sheath flow geometries in the cuvette and PDMS system also explain the different scaling in relative virtual channel width \(\tilde w\) of Eqs. (1) and (2).
Next, we ask if virtual channels inside a flow cytometer cuvette are suited to induce cell deformation. The answer is not obvious since cell surface stress scales with the velocity gradient between the maximum at channel center and zero velocity due to the noslip boundary condition at the glass surface (Fig. 1b). Assuming typical experimental values for a cuvette of side length 360 µm and 3 cm s^{−1} cell velocity this results in shear rates in the order of 10^{2} s^{−1}, which is in contrast to ~10^{4} s^{−1} for cells inside a 20 µm PDMS chip at a velocity of 10 cm s^{−1}.
Despite two orders in magnitude difference in shear rate we do not only find the majority of cells inside the virtual channel of a cuvette deforming but also observe an ellipsoidal steadystate shape (Fig. 4c, bottom and Fig. 5a, green contour), which clearly deviates from the bullet shape in PDMS systems (Fig. 2c and Fig. 5a, blue contour) and from the circular reference state (Fig. 4c, top and Fig. 5a, yellow contour). Aiming to understand the physical origin of the alternating cell shapes, we perform a Fourier decomposition of the cell contour analyzing the amplitude of the first ten Fourier components^{40}.
For cells inside a virtual channel of a glass cuvette the second shape mode dominates (Fig. 5a, green) while cells inside the virtual channel of a PDMS chip possess significant contributions of the third and fifth mode (Fig. 5a, blue). Looking at the total harmonic distortion of the first ten Fourier components we find no contribution of the odd modes to ellipsoidal cell shape (Fig. 5a, inset), which implies a deformation inside the cuvette perpendicular to the direction of flow, only.
The fundamental difference in Fourier spectra points toward stress distributions on the cell surface that originate from different physical principles. We speculate that, while cell deformation in narrow channels, i.e., (virtual channels in) micrometersized systems, is mainly driven by shear, cells inside virtual channels of a cuvette are deformed by an interfacial stress \(\sigma _{\mathrm{i}}\) originating from the liquid–liquid interface (Fig. 4b, left and Fig. 4c, bottom).
We investigate this hypothesis by calculating the hydrodynamic shear stress and normal stress on a cell surface inside a glass cuvette using FEM simulations (see Methods). Here, we assume a total flow rate of 1.02 µl s^{−1} (Q_{sh} = 1000 nl s^{−1}, Q_{sa} = 20 nl s^{−1}) and a constant viscosity of 11 mPa s. In geometries with a relative size \(\lambda = r_{{\mathrm{sphere}}}/R\), where r_{sphere} is the cell radius and R is the equivalent cuvette radius, peak stress increases with increasing \(\lambda\) for a fixed flow rate (Supplementary Fig. 8). While this relationship is valid for any laminar microfluidic system with a central spherical obstacle, we can show that virtual channels also possess a constant stress contribution at the interface resulting from the viscosity mismatch between the two coflowing aqueous polymer phases. This effect has been described previously for systems where an annular flow of low viscosity, surrounds a core of high viscosity, e.g., oil, to reduce friction at the oilwall interface for powereffective transportation in pipes^{41}. Under these conditions, \(\sigma _{\mathrm{i}}\) can be derived from the simple expression:
where \(\eta _{{\mathrm{sa}}}\left( {\dot \gamma } \right)\) is the viscosity of the sample flow at shear rate \(\dot \gamma\), w is the width of the virtual channel, u_{c} is the cell velocity inside the virtual channel and u_{a} the superficial velocity proportional to \(\frac{{Q_{{\mathrm{sh}}}}}{{\pi R^2}}\).
Utilizing experimental values for HL60 cells moving at a flow rate of 1.015 µl s^{−1} (Q_{sh} = 1000 nl s^{−1}, Q_{sa} = 15 nl s^{−1}) inside a w = 14 μm virtual channel of a cuvette with a side length of 360 µm we obtain a velocity of \(u_c = 2.8\,{\mathrm{cm}}\,{\mathrm{s}}^{  1}\) and a stress at the liquid–liquid interface of \(\sigma _{\mathrm{i}} = 78\,{\mathrm{Pa}}\). In comparison to the hydrodynamic shear and normal stress, \(\sigma _{\mathrm{i}}\) dominates (Supplementary Fig. 8) thus inducing cell deformation predominantly perpendicular to the direction of flow (Fig. 4c, bottom). For the calculation, viscosity values of \(\eta _{{\mathrm{sa}}}\left( {\dot \gamma } \right) = 11\,{\mathrm{mPa}}\,{\mathrm{s}}\) were taken from FEM simulations and independently confirmed using calibration beads with a fixed elastic modulus of \(E = 1.5 \pm 0.5\,{\mathrm{kPa}}\) (see Methods)^{42}.
Since Eq. (3) allows to consider the ellipsoidal cell shape as the steadystate response to a simple creepcompliance experiment with a constant interfacial stress \(\sigma _{\mathrm{i}} = E\,\varepsilon _{\mathrm{c}}\), the Young’s modulus can directly be calculated from the area strain \(\varepsilon _{\mathrm{c}}\) of the cell (see Methods). Effectively, the liquid–liquid interface acts as a highfrequency liquid cantilever for probing global cell rheological properties on a millisecond time scale such that material properties can be extracted from simple linear models.
As a proofofprinciple experiment we characterize HL60 cells inside the virtual channel of a glass cuvette utilizing the parameters above. Assuming volume conservation the area strain can be calculated (see Methods) where a mean value of \(\bar \varepsilon _c = 0.10 \pm 0.03\) (mean ± std. dev.) is obtained analyzing more than two thousand cells (Fig. 5b, top). From the single strain values \(\varepsilon _{\mathrm{c}}\) the Young’s modulus of each cell can be derived (Fig. 5b, top inset). Here, the shaded area defines an exclusion zone of cells being smaller than the virtual channel diameter, which are not probed by the interfacial stress and excluded for rheological analysis.
In a final step we perform measurements on HL60 cells after cytoskeletal modifications where we apply the liquid–liquid interface to induce cell deformation. Analyzing three biological replicates, we compare the Young’s modulus of control cells (n = 2689), the corresponding DMSO control (0.25% (v/v); n = 3829), and cells after treatment with 1 µM CytoD (n = 3497). A statistical analysis reveals no difference between control (\(E = 1.00 \pm 0.06\,{\mathrm{kPa}}\) (mean ± SEM)) and vehicle (\(E = 0.97 \pm 0.03\,{\mathrm{kPa}}\)), but a significant reduction after treatment with CytoD (\(E = 0.74 \pm 0.03\,{\mathrm{kPa}}\)) compared with the control (p < 0.0065) and the DMSO control (p < 0.0006; Fig. 5b, lower graph and Supplementary Fig. 9).
For verification of our results, we adjust the virtual channel diameter inside the glass cuvette to w = 20 µm utilizing a total flow rate 1.02 µl s^{−1} (Q_{sa} = 20 nl s^{−1} and Q_{sh} = 1000 nl s^{−1}). With a mean diameter of HL60 cells smaller than w, cellular stress is governed by hydrodynamic shear and normal forces and not by the liquid–liquid interface. Analyzing more than 6000 cells, we find a median cell deformation d = 0.017 ± 0.007 (median ± std. dev.; Fig. 5c, top graph), which enables applying the analytical model published earlier to predict the Young’s modulus by solving the full flow profile around the cell inside the microfluidic chip^{27}. We obtain \(E = 1.37 \pm 0.55\,{\mathrm{kPa}}\) (Fig. 5c, top inset). A statistical analysis of three experimental replicates for control (n = 19,018 cells), DMSO vehicle (0.25% (v/v); n = 23,612), and 1 µM CytoD (n = 15,245) reveals no difference between the control (\(E = 1.5 \pm 0.1\,{\mathrm{kPa}}\) (mean ± SEM)) and the vehicle (\(E = 1.58 \pm 0.05\,{\mathrm{kPa}}\)), but a significant reduction in the elastic modulus for cells treated with CytoD (\(E = 1.25 \pm 0.06\,{\mathrm{kPa}}\)) compared with the control (p < 0.04) and the DMSO control (p < 0.0004; Fig. 5c, lower graph and Supplementary Fig. 10).
Highthroughput tissue mechanics
We reveal the full potential of virtual fluidic channels by studying the impact of singlecell mechanics on tissue properties. Such a comparative analysis is of high importance, e.g., to understand emergent effects in cellular coculture systems in regenerative medicine. This has so far only been possible using atomic force microscopy with its ability to bridge length scales from a few micrometers to a millimeter scale. Here, we aim to utilize the capability of virtual channels to modify the constriction diameter and to tailor the hydrodynamic stress distribution toward highthroughput characterization of HEK293T cells and spheroids inside the glass cuvette of a commercial flow cytometer.
Spheroids have been cultured for multiple days in agarose micromolds with an initial seeding density of ~30 cells per well. We observe an average spheroid diameter of 82 ± 23 µm (mean ± std. dev.; n = 5) at day 1, which increases to 134 ± 19 µm (n = 13) at day 4 (Fig. 6a, left). Approximating the number of cells inside the spheroids from the volume allows to fit an exponential growth curve to our data, where we find a doubling time of 32 h (Fig. 6a, right).
For studying the contribution of single cells to tissue stiffness we first adjust the diameter of the virtual channel inside the cuvette to w = 16 µm to probe single HEK293T cells by interfacial stress (Fig. 6b, left panel; 114 µM MC sample and 5 mM PEG40000 sheath) yielding \(\varepsilon _c = 0.09\pm0.03\) (median ± std. dev.; Fig. 6b, center panel and Supplementary Fig. 11). The cellular Young’s modulus E is calculated under steadystate conditions applying the interface model. Utilizing experimental parameters of u_{c} = 2.8 cm s^{−1} and \(\eta _{{\mathrm{sa}}} = 11\,{\mathrm{mPa}}\,{\mathrm{s}}\) yields an interfacial stress of \(\sigma _{\mathrm{i}} = 66\,{\mathrm{Pa}}\), which exceeds the stress originating from Poiseuille flow (Supplementary Fig. 8). From the stress–strain relationship we obtain a mean Young’s modulus of E = 0.73 ± 0.38 kPa for single HEK293T cells (Fig. 6b, right panel).
Finally, virtual fluidic channels are applied for highthroughput mechanical characterization of HEK293T spheroids as a 3Dtissue model. Cells are cultured into spheroids with a diameter of ~130 µm using agarose micromolds, where each spheroid contains an average of 650 cells (Fig. 6a, right, blue box plot; see Methods). Taking advantage of the simple relationship between Q_{sa}, Q_{sh}, η_{sa}, and η_{sh}, stable virtual channels of 190 µm mean diameter are established inside the constriction of the cuvette (Eq. (2) and Fig. 6c, left panel). While suspended spheroids slightly perturb the liquid–liquid interface during translocation, the low Reynolds number regime ensures a fast recovery within less than two spheroid diameters. The spheroids show the typical bulletlike shape with a mean deformation of 0.038 ± 0.027 (mean ± std. dev.; Fig. 6c, center panel), which is significantly higher than the undeformed reference state at 260 µm virtual channel width (Supplementary Fig. 12).
For estimating the elastic modulus of spheroids, we first calculate \(\sigma _{\mathrm{i}}\) from Eq. (3) utilizing experimental parameters Q_{sh} = 330 nl s^{−1}, u_{c} = 1.67 cm s^{−1}, and w = 190 µm as stated above. Assuming a viscosity \(\eta _{{\mathrm{sh}}} = 53\,{\mathrm{mPas}}\) from FEM simulations of the full hydrodynamic geometry yields an interfacial stress of \(\sigma _{\mathrm{i}} = 20\,{\mathrm{Pa}}\). With a magnitude much smaller than the hydrodynamic shear and normal stress, spheroid deformation is dominated by the parabolic flow profile and the elastic modulus is obtained from the analytical model published earlier^{27,43}. This yields \(E = 86 \pm 36\,{\mathrm{Pa}}\) (mean ± std. dev.; Fig. 6c, right panel). Analyzing three biological replicates of more than 700 spheroids and 2000 cells, we derive an apparent Young’s modulus of 84 ± 78 Pa (mean ± SEM), which is a factor of ten smaller than single cells cultured in a 2D plastic culture dish with 0.79 ± 0.06 kPa (Fig. 6c, right panel inset).
Discussion
Microfluidics has shown great impact in fundamental and applied biochemical, biomedical as well as biophysical research^{21,30,44}. The possibility to control nanoliter sample volumes to perform quantitative molecular and cellular assays of highest sensitivity is one of the great promises of fluidic microtechnology and aims to replace bulk experimental assays^{23}. Recent examples include single molecule and protein sensing, chemical reactions for analyte diagnostics, fluorescence cytometry as well as mechanical cell characterization^{21,24,45,46}.
In the low Reynolds number regime laminar systems can be categorized into single and multiple phase flows^{47,48,49,50,51}. While single aqueous phases have mainly been used to study material properties of molecules and cells^{24,25,26,52}, multiphase flows allow to tailor the total reaction volume to the analyte of interest, e.g., to control diffusive processes or for spatiotemporal alignment of particles and cells^{21,38}. Interestingly, a combination of both approaches, i.e., modifying the system size and tailoring the hydrodynamic stress distribution to perform rheological characterization of biological matter across various scales, has not been achieved before.
The latter would be of high importance for the growing field of 3Dtissue assays. In contrast to twodimensional cell culture systems using plastic petri dishes, 3D models allow to mimic a physiological environment that can be used, e.g., for drug discovery^{53}, to study thrombi formation in vitro^{54} as well as cardiac tissue regeneration^{55}. While recent research was focusing on generation of 3D cell cultures, e.g., using hanging drop microplates or spheroid microplates with ultralow attachment coating, highthroughput characterization of tissue function mainly focused on molecular labels or genomics as well as transcriptomics potentially altering the sample^{56}.
In contrast to standard assays in cell biology, methods utilizing intrinsic material properties of tissues provide a labelfree access to biological function. Originally, these methods have been limited to single cells^{6,8} and were mainly based on the interaction between an acoustic, optical or physical probe^{57,58}. Recently, atomic force microscopy and micropipette aspiration have been extended toward 3Dtissue assays where they probe mechanical properties locally by integrating over a limited number of cells^{59}. However, a highthroughput assay able to impose a homogeneous stress distribution on a tissue that integrates cellcell and cellmatrix interactions into the stress–strain response remained elusive.
By introducing virtual fluidic channels, we establish a simple, fast and highly flexible method to perform microfluidic experiments independent of chip material and chip geometry. We demonstrate that only two parameters, volumetric flow rate and medium viscosity, are sufficient for onthefly modifications of channel crosssections resulting in constrictions with fluid dynamics comparable to systems built from soft lithography.
Virtual fluidic channels can be formed inside classic microfluidic systems, e.g., PDMS chips, but also inside mesoscopic geometries of centimeter size. Using a glass cuvette from a commercial flow cytometer, we show the formation of a stable liquidbound constriction with crosssections that can be changed from a few microns to hundreds of micrometers within seconds.
As one potential application we performed mechanical characterization of HL60 cells in both systems. Proofofprinciple experiments in PDMS chips using realtime deformability cytometry revealed an elasticity of 0.95 ± 0.01 kPa (mean ± SEM) and 0.92 ± 0.02 kPa for solid and fluid confinement, respectively, showing no significant differences. Next, we repeated our assay using virtual channels created in a large glass cuvette where we obtained a slightly elevated Young’s modulus of 1.5 ± 0.1 kPa. The observed differences potentially originate from different levels in deformation amplitudes present in both systems. In fact, the deformation inside the glass cuvette is so small that deviations of the initial cell shape from an ideal circle (circularity = 1) might impede application of the analytical model that requires finite cell shape changes in shear flow^{27,43}.
For solving this discrepancy, we demonstrate that the viscosity mismatch at the liquid–liquid interface leads to an interfacial stress resulting in a cellular strain that allows for extracting material properties from simple creepcompliance experiments. For HL60 cells probed by this liquid–liquid interface of a virtual channel inside a glass cuvette we obtain an elastic modulus of 0.97 ± 0.03 kPa, which is in good agreement not only with our PDMS results based on shear flow but also with data published earlier^{27,40}. In fact, our proofofprinciple experiments demonstrate that a virtual channel acts like a liquid cantilever that exposes biological samples to a homogeneous 3D stress distribution for probing biological matter on a millisecond scale. In contrast to atomic force microscopy or microconstrictions virtual fluidic channels enable a labelfree analysis without any cellwall interaction and at highthroughput.
We highlight further potential applications of virtual fluidic channels and provide the first highthroughput rheological characterization of spheroids inside the cuvette of a commercial flow cytometer. Spheroids have gained an increasing importance as in vitro 3D cell culture models in biology closely mimicking in vivo conditions during development^{10,32}. In addition, the mechanical microenvironment in a tissuelike structure might also be of importance to understand immunespecific cell response to external stimuli, e.g., during inflammation^{60}. While our data on this tissue model confirms previous studies of small sample size^{34,35}, virtual fluidic channels additionally enable comparative singlecell and tissue rheology of sufficient statistical power appropriate for largescale sample screenings.
In summary, virtual fluidic channels allow for onthefly generation of nearly arbitrary hydrodynamic environments inside large fluidic geometries, e.g., commercial glass cuvettes. We demonstrate that our method provides simultaneous access to material properties of biological samples across various length scales from single cells to tissues, which could be highly relevant for a functional evaluation of engineered tissue grafts in regenerative applications. Ultimately, our approach renders microfluidic experiments independent of soft lithography and extends the parameter space of classical fluorescencebased flow cytometry toward an unbiased cell and tissue analysis utilizing intrinsic material properties.
Methods
Sample and sheath fluid
Sample solution is used as cell as well as spheroid carrier and is made of methylcellulose (MC, approximate molecular weight 88 kDa, Sigma) in PBS−/− (without Mg^{2+} and Ca^{2+}). Briefly, MC concentrations of 0.5% (w/v), respectively, 57 µM, and 1.0% (w/v), respectively, 114 µM, are dissolved at room temperature by agitation overnight. The osmolarity of MC solutions is measured to be stable at a physiological range between 275 and 295 mOsm (Fiske 210 Osmometer). The sheath fluid is used to establish a liquid confinement of the sample and is made of polyethylene glycol (PEG) in PBS−/− with a molecular weight of 8000 Da (AppliChem) or 40,000 Da (Serva Electrophoresis). Experiments have been carried out at concentrations of 50 mM (PEG8000) and 2 mM as well as 5 mM (PEG40000).
The shearrate dependent viscosities of our buffers are obtained from a full rheological characterization using a rheometer in coneplate geometry (MCR502, Anton Paar). MC solutions reveal a concentrationdependent shearthinning behavior and the dynamic viscosities follow a simple power law (Fig. 1c):
where \(\eta _{{\mathrm{MC}}}\left( {\dot \gamma } \right)\) is the dynamic viscosity of 57 and 114 µM MC at the hydrodynamic shear rate \(\dot \gamma\), respectively. Here, n denotes a consistency parameter with n_{57 µM} = 0.078 Pa s and n_{114 µM} = 0.60 Pa s, m is the flow behavior index with m_{57 µM} = 0.79 and m_{114 µM} = 0.64, while \(\dot \gamma _0\) = 1 s^{−1} for reference.
All PEG solutions can be described by a Newtonian behavior (Fig. 1c) with a constant viscosity of η_{PEG8000 (50 mM)} = 0.106 Pa s, η_{PEG40000 (2 mM)} = 0.015 Pa s andη_{PEG40000 (5 mM)} = 0.154 Pa s over the entire relevant shearrate range from 100 to 50,000 s^{−1}.
All buffers are sterile filtered (pore size 0.2 µm, VWR) prior to experiments.
Virtual channel formation
We use two major geometries to establish virtual channels in fluidic devices: a microfluidic chip assembled from polydimethylsiloxane (PDMS) and sealed with a glass cover slide as well as a mesoscopic glass cuvette commonly used in commercial flow cytometers.
The microfluidic chip is produced using soft lithography (Zellmechanik Dresden) and consists of two inlets, which are connected to a syringe pump (NemeSys, Cetoni). An outlet is used for recollection of cells for potential downstream analysis. Prior to an experiment, two 1ml syringes (LuerLock syringe, BD) with MC solution (sample) and PEG solution (sheath) are assembled on the syringe pump system, which is controlled by the ShapeIn2 software (version 2.0.5, Zellmechanik Dresden). The PDMS chip is first filled with the MC buffer through the sample inlet at 100 nl s^{−1} and subsequently the PEG solution is added through the sheath inlet at 50 nl s^{−1} (Supplementary Fig. 1A). The virtual channel forms immediately inside the squared central constriction of 300 µm length and 30 µm × 30 µm crosssection, can be adjusted by controlling flow rates as well as buffer viscosities and is stable throughout the entire duration of the experiment.
In a second set of experiments, a standard flow cytometry glass cuvette (Sysmex) is used. With a length of 2 cm and a quadratic 360 µm × 360 µm crosssection the constriction of the cuvette exceeds the dimensions of our microfluidic chip by almost a factor of 100. In contrast to the planar geometry in the PDMS system, the sheath flow completely surrounds the sample and results in a threedimensional confinement (Fig. 4b, left panel). Both inlets are connected to a syringe pump (NemeSys, Cetoni) and 114 µM MC solution (1 ml LuerLock syringe, BD) as well as 5 mM PEG40000 solution (10 ml LuerLock syringe, BD) are used for sample and sheath, respectively (Supplementary Fig. 1B). For initiating experiments, the cuvette was simultaneously filled with MC at 200 nl s^{−1} through the sample inlet and PEG at 1000 nl s^{−1} through the sheath inlet. The virtual channel forms immediately upon contact and remains stable throughout the entire experiment. The sample flow is not in contact with the surface of the cuvette as it is completely surrounded and confined by sheath buffer.
Finite element method simulations
Numerical finite element method (FEM) simulations have been performed using Comsol Multiphysics (version 5.4, Comsol Group) and its computational fluid dynamics and transport packages. For the microfluidic chip the full layout is reconstructed, and one quadrant used for hydrodynamic simulations taking advantage of the two symmetry axes through the center line of the design (Fig. 1a and Supplementary Fig. 1A)^{40}. The layout of the glass cuvette is reconstructed following the manufacturer’s documentation, and one eighth of the entire structure is simulated utilizing the four symmetry axes through the center line of the design (Fig. 4a and Supplementary Fig. 1B).
FEM simulations are carried out using physicscontrolled meshes of an extra fine element size defined by the meshing algorithm. For the microfluidic chip this leads to a meshed volume of ~6 × 10^{6} elements with an average element radius of 1.2 µm, for the glass cuvette to ~1 × 10^{6} elements with an average element radius of 14.3 µm. For all experiments, the fluid is set to be incompressible and solid walls are defined by a noslip boundary condition. The fluid is modeled as a superposition of the respective MC and PEG solution material features, normalized to the local concentrations. While laminar inflow at sample and sheath inlet are assigned flow rates under constant pressure conditions, backflow is suppressed, reflecting experimental conditions. Parametric and material sweeps supporting the derivation of the scaling law in Eq. (1) are performed for all sample and sheath materials as well as flow rate combinations and channel geometries (Supplementary Table 1).
FEM simulations to determine the shear stress on a sphere’s surface are carried out by simulating a steadystate condition minimizing the difference of the integrated shear stress and the pressure acting on the sphere following ref. ^{27}. The whole system is set to move by the velocity of the interface u_{i} found in fullgeometry simulations. Simulation of surface stresses as a function of relative cell size \(\lambda\) is conducted in the very same manner using respective parameters (Supplementary Table 1).
Virtual channel characterization
In both major geometries, PDMS chip and glass cuvette, we use the squared grayscale intensity gradient to identify the interfaces between MC and PEG solutions in the focal plane of our brightfield images. Having a regionofinterest of 250 pixels in length and sufficient height, to capture the entire virtual channel, the mean pixel intensity is calculated for each pixel line. From this onedimensional intensity distribution perpendicular to the flow direction the squared intensity gradient is derived yielding two local maxima. These are identified as the optical interface position (Fig. 1a, top inset) and are chosen to coincide with the halfmaximum MC concentration found by FEM simulations (Fig. 1b) to describe the distinct phases accordingly:
or, equivalently:
with \( y_{{\mathrm{max}}} \le y \le y_{{\mathrm{max}}}\) and \(0 \le \tilde w \le 1\), \(c_{{\mathrm{MC}}}(y)\) is the methylcellulose concentration distribution while \( y_{{\mathrm{max}}}\) and \(y_{{\mathrm{max}}}\) are the lateral boundaries of the solid constriction inside the microfluidic chip or cuvette, respectively. The relative width \(\tilde w\) of the virtual channel is thus defined by the halfmaximum concentration \(\frac{1}{2}c_{{\mathrm{MC}},\,{\mathrm{max}}}\) (Fig. 1a, b).
A simple linear proportionality analysis allows to describe \(\tilde w\) in our PDMS chip (Fig. 1a, top inset)^{38}:
with the flow rates Q_{sa} and Q_{sh,} the dynamic viscosities \(\eta _{{\mathrm{sa}}}\) and \(\eta _{{\mathrm{sh}}}\), the crosssections of the aqueous phases A_{sa} and A_{sh}, the mean velocities u_{sa} and u_{sh}, and the linear proportionality factor B. We fit Eq. (7) to our experimental data (Fig. 1d) with an open parameter B yielding B = 0.994 ± 0.047 (99% confidence interval). Therefore, we safely set B = 1, which simplifies Eq. (7) to:
Interestingly, this simple equation is completely independent from the specific polymers, chain lengths, molecular weights, and concentrations.
An analysis of the entire flow rate and viscosity range for sample and sheath yields 0.05 < \(\frac{{Q_{{\mathrm{sa}}}}}{{Q_{{\mathrm{sh}}}}}\frac{{\eta _{{\mathrm{sa}}}}}{{\eta _{{\mathrm{sh}}}}}\) < 2, where a stable interface can be observed. Beyond this range either sample or sheath flow may completely dominate.
In a similar way, a description can be derived for a circular virtual channel inside a rectangular crosssection:
which simplifies to Eq. (2) for B = 1. Notably, Eqs. (2) and (8) show a quadratic behavior for the relative width due to the specific boundary conditions.
Characterization of interface stability has been done by analyzing the diffusion of both polymers, MC and PEG, in PBS. Diffusion coefficients of MC, PEG8000 and PEG40000 in PBS were measured by dynamic light scattering (DLS, Zetasizer NanoZS, Malvern Instruments). DLS analyzes the autocorrelation function of backscattered intensity fluctuations over time. The diffusion coefficients are D_{MC} = 8 × 10^{−12} m^{2} s^{−1}, D_{PEG8000} = 2 × 10^{−10} m^{2} s^{−1}, and D_{PEG40000} = 3 × 10^{−11} m^{2} s^{−1}, respectively. Measurements were carried out at 25 °C at a scatter angle of 173°. Average diffusive displacement of dissolved polymers can be calculated using the solution to Fick’s second law \({\mathrm{\Delta }}x = \sqrt {2Dt_{{\mathrm{passage}}}}\) and is <1 µm for each polymer (using typical time to traverse a microfluidic chip constriction t_{passage} = channel length/flow velocity ≈ 2 ms).
Cell culture
HL60 cells, a myeloid precursor cell line (courtesy of Dan and Ada Olins) are cultured in RPMI1640 medium (BioWest) with 10% FCS (Gibco), 1% penicillin/streptomycin (BioWest), and 2 mM LGlutamin (BioWest) in an incubator at 37 °C under 5% CO_{2} and 95% ambient air. Every 48 h cells are centrifuged at 200 × g for 5 min (Allegra X15R, Beckman Coulter), the supernatant is discarded, and cells are resuspended to a concentration of ~1.5 × 10^{5} cells per milliliter. Experiments are carried out ~36 h after splitting during logphase. Cells have been checked for Mycoplasma infection, and viability is assessed prior to experiments to ~95% using Trypan Blue.
HEK293T cells as a model system for adherent cells are cultured in DMEM high glucose medium (BioWest) with 10% FCS (Gibco) and 2 mM LGlutamine (BioWest) in an incubator at 37 °C under 5% CO_{2} and 95% ambient air. After reaching a confluency of 80%, cells are detached from T25 culture flasks enzymatically by exposure to 1× Trypsin (BioWest) for 2 min, centrifuged at 200 × g for 5 min (Allegra X15R, Beckmann Coulter), and the supernatant is discarded. Cells are resuspended in cell culture medium to a final amount of 0.8 × 10^{6} cells per flask. Cells have been checked for Mycoplasma infection and viability is assessed prior to experiments to ~95% using Trypan Blue.
Spheroid culture
HEK293T spheroids as a tissue model system are cultured in agarose micromolds following the manufacturer protocol (Microtissues). Briefly, after autoclaving the micromolds, 2% (w/v) agarose (Biozym Scientific) is dissolved in 0.9% (w/v) sterile saline and boiled in a microwave oven. After cooling to 60–70 °C, 500 µl molten agarose is added into a 12series micromold, removed after gelation and transferred to a 12well culture plate and equilibrated with medium.
Cells are initially grown in a T75 culture flask with a seeding density of 2 × 10^{6} cells. After reaching a confluency of 60–80%, cells are detached enzymatically by exposure to 1× Trypsin (BioWest) for 5 min, centrifuged at 200 × g for 5 min (Allegra X15R, Beckmann Coulter) and 7000 cells are resuspended in a total volume of 120 µl of cell culture medium inside the agarose micromold containing 256 wells. Cells are grown for 3 days reaching a mean spheroid diameter of ~130 µm inside the wells. Each spheroid consists of 650 single cells on average.
The agarose micromolds are flipped upside down and the spheroids are collected in a 12well plate submerged in PBS−/− and centrifuged at 50 × g for 5 min (Allegra X15R, Beckmann Coulter). After collection in a falcon tube and a further centrifugation at 50 × g for 5 min, the pellet is resuspended in MC buffer to a concentration of 1000 spheroids per 200 µl prior to experiments.
Realtime deformability cytometry
Realtime deformability cytometry (RTDC) is used for highthroughput mechanical cell and spheroid characterization. The system is built on a commercial solution (AcCellerator, Zellmechanik Dresden) consisting of an inverted microscope (Axio Observer A.1, Zeiss), a CMOS camera (MC1362, Mikrotron), a microsecondpulsed LED illumination (L1, Zellmechanik Dresden), and a dedicated syringe pump (NemeSys, Cetoni).
Either a microfluidic chip or a glass cuvette is assembled on the xystage of the microscope. Cells or spheroids translocate through a constriction and deform by hydrodynamic shear and normal stress^{26,27}. Image acquisition and analysis are performed in realtime with a throughput exceeding 1000 cells or 10 spheroids per second (depending on initial concentration) and deformation is quantified using the circularity of each particle:
Measurements on single cells are performed using a 40x objective (PDMS chip: Apochromat, Zeiss; glass cuvette: LD Plan Neofluar, Zeiss) with an optical resolution of 0.34 µm per pixel, and on spheroids using a 20x objective (LDC, Zeiss) with 0.68 µm per pixel.
Measurement protocol
Prior to RTDC experiments using microfluidic chips, the entire fluidic system is first filled via the sample inlet using 57 µM MC solution at a flow rate of 100 nl s^{−1}. Next, 50 mM PEG8000 solution is added through the sheath inlet at a flow rate of 50 nl s^{−1}. Upon contact of both aqueous phases in the entrance region of the constriction, a distinctive virtual channel forms immediately, which can be identified by the optical phase difference at the interface (Fig. 1a). After stabilizing the fluid flow for 3 min, sample and sheath are adjusted to the experimental flow rates and equilibrated for 2 min.
In a typical RTDC experiment, inlet tubing is detached after virtual channel formation and 100 µl of cell suspension in MC buffer at a concentration of ~10^{6} cells per milliliter are drawn using the syringe pump. The tube is reconnected and the experimental flow rates are applied. RTDC of single cells is performed as published^{26}. Briefly, deformation and size of several thousand single cells inside the virtual channel are analyzed. Measurements are carried out at flow rates of Q_{sa} = 10 nl s^{−1} and Q_{sh} = 30 nl s^{−1} (sample and sheath MC (57 µM), 20 µm × 20 µm crosssection PDMS chip), Q_{sa} = 90 nl s^{−1} (sample MC (57 µM)) and Q_{sh} = 4 nl s^{−1} (sheath PEG8000 (50 mM), virtual channel of 21 µm × 30 µm crosssection in the constriction of PDMS chip of 30 µm × 30 µm crosssection). In addition, a reservoir measurement, i.e., before entering the (virtual) channel, is taken for reference.
Prior to experiments using the glass cuvette, the full fluidic system is cleaned manually by flushing both inlets with 10 ml of 70% isopropanol and deionized water. This procedure also ensures a complete degassing of the system, which is an essential requirement for stable virtual channels. Next, the glass cuvette is simultaneously filled with 114 µM MC at 200 nl s^{−1} via the sample and 5 mM PEG40000 at 1000 nl s^{−1} via sheath inlet. Upon virtual channel formation inside the central constriction, the system is stabilized for 10 min before experimental flow rates are applied and then equilibrated for additional 2 min.
In a typical RTDC experiment, the sample is resuspended in 1 ml of 114 µM MC to a concentration of ~10^{6} cells per milliliter or 5 × 10^{3} spheroids per milliliter. Longterm virtual channel stability is achieved by preparing a biological sample solution in a separate syringe/tubing system and replacing the initial set manually. RTDC measurement are carried out 3 mm inside the constriction of the cuvette and by controlling the flow rates to tune the virtual channel to a diameter of 20 µm using flow rates Q_{sa} = 20 nl s^{−1} and Q_{sh} = 1000 nl s^{−1} (cells) and to a diameter of 190 µm using flow rates Q_{sa} = 330 nl s^{−1} and Q_{sh} = 200 nl s^{−1} (spheroids). In addition, a reservoir measurement is conducted in a virtual channel of 88 µm width for singlecell samples and of 260 µm width for spheroid samples as a reference. For each condition several thousand cells and hundreds of spheroids are analyzed, respectively.
Data acquisition, image analysis, and the control of the syringe pump are performed by using the ShapeIn2 software (version 2.0.5, Zellmechanik Dresden).
Compound treatment of HL60 cells
The HL60 cells were treated with cytochalasin D (CytoD) to inhibit filamentous actin polymerization (SigmaAldrich). Cell concentration was adjusted to 10^{6} cells in 100 µl of 57 µM MC and CytoD dissolved in dimethyl sulfoxide (DMSO; SigmaAldrich) was added to a final concentration of 1 µM^{61} . Prior to the experiment cells were incubated for 20 min at 37 °C (5% CO_{2} and 95% ambient air). During measurement DMSO and CytoD concentration is maintained constant to avoid the reversibility of the effect^{62}.
Analytical models for cell mechanical properties
For determining the elastic properties of cells and spheroids inside the glass cuvette we model the full virtual channel inside a crosssection of 360 µm side length. The relative diameter \(\tilde w\) of the virtual channel is obtained from experimental data (Fig. 1a, top inset), the velocity at the liquid–liquid interface is extracted from FEM simulations assuming Stokes flow and used as a moving wall boundary condition. Placing a sphere of radius r_{sphere}, representing either a cell or a spheroid, in the centre of the virtual channel allows for extracting a mean surface shear rate for all experimental conditions. The dynamic viscosity of the MC solution is then determined by using Eq. (4).
For deriving the elastic modulus of cells and spheroids, respectively, we provide two different analytical models.
The first approach is based on an analytical model introduced earlier^{27}. Briefly, for a moving object inside the (virtual) channel we assume a steadystate defined by the balance of shear and normal forces on its surface. Expansion of the Stokes equation in the appropriate geometry and coupling to linear elasticity theory allows to predict surface displacement of an initially round object. Our model shows for a given relative size \(\lambda = r_{{\mathrm{sphere}}}/R\), where r_{sphere} is the object’s radius and R is the (equivalence) radius of the constriction, that the characteristic stress scales with the viscosity of the surrounding medium as well as with object velocity and is a function of the surface position. Since deformation is governed by shear and normal forces originating from the Poiseuille flow inside the microfluidic channel, the steadystate object shape resembles a bullet with finite front radius, which is best characterized by its circularity. Assuming objects of varying bulk elastic modulus E, cell deformation can be predicted for a given characteristic stress and be used to generate a lookup table to solve the inverse problem, i.e., to predict E from cell deformation.
The second model is based on the reduction of viscous friction for material transport in pipes and is described by an interfacial stress \(\sigma _{\mathrm{i}}\) at the liquid–liquid interface of coflowing solutions^{41}. Here, we use \(\sigma _{\mathrm{i}}\) to impose a surface stress on objects confined in a virtual channel and to induce a deformation with an amplitude that depends on the elastic modulus of the object, its velocity, the virtual channel radius and medium viscosity (Eq. (3)). In contrast to the above model utilizing hydrodynamic shear and normal forces where deformation is quantified by circularity, the interfacial stress acts perpendicular to the direction of flow and leads to an ellipsoidal deformation, that can be described by an area strain.
The area strain \(\varepsilon _{\mathrm{c}}\) is calculated from the crosssectional area of the deformed cell A(t). Assuming volume conservation and a spherical reference cell shape the area of the undeformed cell A_{0} can be approximated and the strain obtained from:
The onedimensional elongation in the direction of flows allows to consider the shape as the steadystate strain in a Kelvin–Voigt model and the elastic modulus can be calculated from \(\sigma _{\mathrm{i}} = E\,\varepsilon _{\mathrm{c}}\).
In principle both, the interfacial stress model and the Stokes equation in combination with linear elasticity theory, can be used to extract elastic properties from RTDC measurements. Our results suggest that the applicability depends on the relative object size \(\lambda\) inside the constriction. While for large \(\lambda\), e.g., cells inside a PDMS channel, surface stress is dominated by the hydrodynamic shear and normal forces originating from Poiseuille flow, deformation in geometries with small \(\lambda\) is governed by the interfacial stress only and shear stress can be neglected.
We investigate the dependency of hydrodynamic shear and interfacial stress on λ by performing FEM simulations for different flow rates of 0.53 and 1.02 µl s^{−1} and the corresponding viscosities of 53 and 11 mPa s for spheroid and cell measurements, respectively (Supplementary Fig. 8). While the interfacial stresses (dashed lines) do not depend on \(\lambda\), we find an increasing peak stress for increasing relative object size. Here, \(\sigma _{\mathrm{i}}\) has been derived from Eq. (3) utilizing typical experimental parameters of w = 14 µm, u_{c} = 2.8 cm s^{−1}, and u_{a} = 0.8 cm s^{−1} for single HL60 cells (blue dotted line) and w = 190 µm, u_{c} = 1.67 cm s^{−1}, and u_{a} = 0.38 cm s^{−1} for spheroids (black dotted line), respectively. For single cells, we find that \(\sigma _{\mathrm{s}}\, > \, \sigma _{\mathrm{i}}\) for \(\lambda \, > \, 0.9\), where \(\sigma _{\mathrm{s}}\) is the hydrodynamic shear stress, while for spheroids we obtain \(\sigma _s \, > \, \sigma _i\) for \(\lambda \, > \, 0.5\).
For choosing a relative size ratio where \(\sigma _{\mathrm{i}}\) dominates, we postulate that the interfacial stress has to exceed the hydrodynamic stress by a factor of 10 or higher. Applying the experimental conditions stated above this results into a threshold of \(\lambda \, < \, 0.4\) for single cells while spheroid deformation is always governed by shear stress.
Viscosity calibration
Viscosity calibration was performed by using beads of fixed elastic modulus \(E = 1.5 \pm 0.5\,{\mathrm{kPa}}\)^{42}. Measuring cell deformation inside a virtual channel of w = 16 µm and utilizing the stress–strain relationship \(\sigma _{\mathrm{i}} = E\varepsilon _{\mathrm{c}}\) allows to calculate \(\eta _{{\mathrm{sa}}}\) from Eq. (3).
Statistical data analysis
Statistical significance is calculated based on independent experimental replicates using linear mixed models^{63}. Here, a pairwise comparison between two groups is utilized to attribute differences in an observable to random and fixed effects, respectively. Random effects represent systematic and stochastic measurement bias, e.g., alterations in virtual channel width, while fixed effects account for the actual effect size, i.e., the increase or decrease in an experimental quantity. Statistical significance is obtained assuming two models, one with and one without the fixed effect and the maximum likelihoods are calculated. Using the likelihood ratio and applying Wilks’ theorem, stating that the distribution of the test statistic −2 log (likelihood ratio) approaches a \(\chi ^2\) distribution with a number of degrees of freedom corresponding to the dimensionality difference of the two models, the corresponding pvalues are determined^{64}.
Sample pairing is performed by utilizing experimental replicates from different measurement days or, if carried out at the same day, linear mixed model analysis is combined with a permutation test of all samples where the pvalue with the lowest significance is reported. Multiple comparisons are not corrected for as parameters are not analyzed in parallel.
All experiments have been repeated at least three times independently with a sample size of n > 100 for spheroids and n > 1000 for cell measurements. The corresponding pvalues are reported in Supplementary Table 2.
Reporting summary
Further information on research design is available in the Nature Research Reporting Summary linked to this article.
Data availability
The datasets generated in this study are available from the corresponding author upon reasonable request. The file formats of the raw rata are AVI for videos, TDMS and RTDC (HDF5) for RTDC data, and MPH for Comsol Multiphysics simulations.
Code availability
Statistical data analysis was performed using the software ShapeOut (version 0.8.7, Zellmechanik Dresden, https://github.com/ZELLMECHANIKDRESDEN/ShapeOut) and Matlab (version R2017a, Mathworks). The source code for FEM simulations and analysis (Comsol Multiphysics, version 5.4 and Matlab version R2017a, Mathworks) is available from the corresponding author upon reasonable request.
References
Di Carlo, D. A mechanical biomarker of cell state in medicine. J. Lab. Autom. 17, 32–42 (2012).
Ayad, N. M. E., Kaushik, S. & Weaver, V. M. Tissue mechanics, an important regulator of development and disease. Philos. Trans. R. Soc. B Biol. Sci. 374, 20180215 (2019).
Ganai, N., Buscher, T., Gompper, G. & Elgeti, J. Mechanics of tissue competition: Interfaces stabilize coexistence. N. J. Phys. 21, 063017 (2019).
Haase, K. & Pelling, A. E. Investigating cell mechanics with atomic force microscopy. J. R. Soc. Interface 12, 20140970 (2015).
Hochmuth, R. M. Micropipette aspiration of living cells. J. Biomech. 33, 15–22 (2000).
Guck, J. et al. The optical stretcher: a novel laser tool to micromanipulate cells. Biophys. J. 81, 767–784 (2001).
Lincoln, B. et al. Deformabilitybased flow cytometry. Cytom. A 59, 203–9 (2004).
Trepat, X. et al. Universal physical responses to stretch in the living cell. Nature 447, 592–595 (2007).
Pelling, A. E. & Horton, M. A. An historical perspective on cell mechanics. Pflug. Arch. 456, 3–12 (2008).
Trepat, X. & Sahai, E. Mesoscale physical principles of collective cell organization. Nat. Phys. 14, 671–682 (2018).
Janmey, P. A. & McCulloch, C. A. Cell mechanics: integrating cell responses to mechanical stimuli. Annu. Rev. Biomed. Eng. 9, 1–34 (2007).
Stone, H. A., Stroock, A. D. & Ajdari, A. Engineering flows in small devices. Annu. Rev. Fluid Mech. 36, 381–411 (2004).
Zheng, Y. & Sun, Y. Microfluidic devices for mechanical characterisation of single cells in suspension. Micro Nano Lett. 6, 327 (2011).
Weaver, W. M. et al. Advances in highthroughput singlecell microtechnologies. Curr. Opin. Biotechnol. 25, 114–23 (2014).
Hochmuth, R., Marple, R. & Sutera, S. Capillary blood flow—1. Erythrocyte deformation in glass capillaries. Microvasc. Res. 2, 409–419 (1970).
Sutera, S., Seshadri, V., Croce, P. & Hochmuth, R. Capillary blood flow—2. Deformable model cells in tube flow. Microvasc. Res. 2, 420–433 (1970).
Sheshadri, V., Hochmuth, R., Croce, P. & Sutera, S. Capillary blood flow— 3. Deformable model cells compared to erythrocytes in vitro. Microvasc. Res. 2, 434–442 (1970).
Xia, Y. & Whitesides, G. M. Soft Lithography. Annu. Rev. Mater. Sci. 28, 153–184 (1998).
Qin, D., Xia, Y. & Whitesides, G. M. Soft lithography for micro and nanoscale patterning. Nat. Protoc. 5, 491–502 (2010).
Agresti, J. J. et al. Ultrahighthroughput screening in dropbased microfluidics for directed evolution. Proc. Natl Acad. Sci. USA 107, 4004–4009 (2010).
Dudani, J. S., Go, D. E., Gossett, D. R., Tan, A. P. & Di Carlo, D. Mediating millisecond reaction time around particles and cells. Anal. Chem. 86, 1502–1510 (2014).
Pagliara, S. et al. Auxetic nuclei in embryonic stem cells exiting pluripotency. Nat. Mater. 13, 638–644 (2014).
Sackmann, E. K., Fulton, A. L. & Beebe, D. J. The present and future role of microfluidics in biomedical research. Nature 507, 181–189 (2014).
Gossett, D. R. et al. Hydrodynamic stretching of single cells for large population mechanical phenotyping. Proc. Natl. Acad. Sci. USA https://doi.org/10.1073/pnas.1200107109 (2012).
Dudani, J. S., Gossett, D. R., Tse, H. T. K. & Di Carlo, D. Pinchedflow hydrodynamic stretching of singlecells. Lab Chip 13, 3728–34 (2013).
Otto, O. et al. Realtime deformability cytometry: onthefly cell mechanical phenotyping. Nat. Methods 12, 199–202 (2015).
Mietke, A. et al. Extracting cell stiffness from realtime deformability cytometry: theory and experiment. Biophys. J. 109, 2023–2036 (2015).
Rosendahl, P. et al. Realtime fluorescence and deformability cytometry. Nat. Methods 15, 355 (2018).
Koch, M. et al. Plasmodium falciparum erythrocytebinding antigen 175 triggers a biophysical change in the red blood cell that facilitates invasion. Proc. Natl Acad. Sci. USA 114, 4225–4230 (2017).
Guck, J. & Chilvers, E. R. Mechanics meets medicine. Sci. Transl. Med. 5, 212fs41 (2013).
Toepfner, N. et al. Detection of human disease conditions by singlecell morphorheological phenotyping of blood. Elife 7, e29213 (2018).
Eyckmans, J. & Chen, C. S. 3D culture models of tissues under tension. J. Cell Sci. 130, 63–70 (2017).
Zuppinger, C. 3D Cardiac cell culture: a critical review of current technologies and applications. Front. Cardiovasc. Med. 6, 1–9 (2019).
Jaiswal, D. et al. Stiffness analysis of 3D spheroids using microtweezers. PLoS One 12, e0188346 (2017).
Blumlein, A., Williams, N. & McManus, J. J. The mechanical properties of individual cell spheroids. Sci. Rep. 7, 7346 (2017).
Adan, A., Alizada, G., Kiraz, Y., Baran, Y. & Nalbant, A. Flow cytometry: basic principles and applications. Crit. Rev. Biotechnol. 37, 163–176 (2016).
Li, J., Sheeran, P. S. & Kleinstreuer, C. Analysis of multilayer immiscible fluid flow in a microchannel. J. Fluids Eng. 133, 111202 (2011).
Knight, J. B., Vishwanath, A., Brody, J. P. & Austin, R. H. Hydrodynamic focusing on a silicon chip: Mixing nanoliters in microseconds. Phys. Rev. Lett. 80, 3863–3866 (1998).
Wu, Z. & Nguyen, N. T. Hydrodynamic focusing in microchannels under consideration of diffusive dispersion: Theories and experiments. Sens. Actuators, B Chem. 107, 965–974 (2005).
Fregin, B. et al. Highthroughput singlecell rheology in complex samples by dynamic realtime deformability cytometry. Nat. Commun. 10, 415 (2019).
Ullmann, A. & Brauner, N. Closure relations for the shear stress in twofluid models for coreannular flow. Multiph. Sci. Technol. 16, 355–387 (2004).
Girardo, S. et al. Standardized microgel beads as elastic cell mechanical probes. J. Mater. Chem. B 6, 6245–6261 (2018).
Mokbel, M. et al. Numerical simulation of realtime deformability cytometry to extract cell mechanical properties. ACS Biomater. Sci. Eng. 3, 2962–2973 (2017).
Amini, H., Lee, W. & Di Carlo, D. Inertial microfluidic physics. Lab Chip 14, 2739–61 (2014).
Bell, N. A. W. & Keyser, U. F. Digitally encoded DNA nanostructures for multiplexed, singlemolecule protein sensing with nanopores. Nat. Nanotechnol. 11, 645–651 (2016).
Blasi, T. et al. Labelfree cell cycle analysis for highthroughput imaging flow cytometry. Nat. Commun. 7, 10256 (2016).
Dittrich, P. S. & Manz, A. Labonachip: microfluidics in drug discovery. Nat. Rev. Drug Discov. 5, 210–8 (2006).
Vanapalli, S. A., Duits, M. H. G. & Mugele, F. Microfluidics as a functional tool for cell mechanics. Biomicrofluidics 3, 12006 (2009).
Teixeira, A. G. et al. Emerging biotechnology applications of aqueous twophase systems. Adv. Healthc. Mater. 7, 1–19 (2018).
Zhao, C. X. & Middelberg, A. P. J. Twophase microfluidic flows. Chem. Eng. Sci. 66, 1394–1411 (2011).
Song, Y., Sauret, A. & Shum, H. C. Allaqueous multiphase microfluidics. Biomicrofluidics 7, 1–12 (2013).
Shaqfeh, E. S. G. The dynamics of singlemolecule DNA in flow. J. NonNewton. 130, 1–28 (2005).
Langhans, S. A. Threedimensional in vitro cell culture models in drug discovery and drug repositioning. Front. Pharm. 9, 1–14 (2018).
Paniccia, R., Priora, R., Liotta, A. A. & Abbate, R. Platelet function tests: a comparative review. Vasc. Health Risk Manag 11, 133–148 (2015).
Hansen, A. et al. Development of a drug screening platform based on engineered heart tissue. Circ. Res. 107, 35–44 (2010).
Frey, O., Misun, P. M., Fluri, D. A., Hengstler, J. G. & Hierlemann, A. Reconfigurable microfluidic hanging drop network for multitissue interaction and analysis. Nat. Commun. 5, 4250 (2014).
Kollmannsberger, P. & Fabry, B. Linear and nonlinear rheology of living cells. Annu. Rev. Mater. Res. 41, 75–97 (2011).
Nijenhuis, N., Zhao, X., Carisey, A., Ballestrem, C. & Derby, B. Combining AFM and acoustic probes to reveal changes in the elastic stiffness tensor of living cells. Biophys. J. 107, 1502–1512 (2014).
DizMuñoz, A., Weiner, O. D. & Fletcher, D. A. In pursuit of the mechanics that shape cell surfaces. Nat. Phys. 14, 648–652 (2018).
Tietze, S. et al. Spheroid culture of mesenchymal stromal cells results in morphorheological properties appropriate for improved microcirculation. Adv. Sci. https://doi.org/10.1002/advs.201802104 (2019).
Golfier, S. et al. Highthroughput cell mechanical phenotyping for labelfree titration assays of cytoskeletal modifications. Cytoskeleton 74, 283–296 (2017).
Stevenson, B. R. & Begg, D. A. Concentrationdependent effects of cytochalasin D on tight junctions and actin filaments in MDCK epithelial cells. J. Cell Sci. 107, 367–375 (1994).
Herbig, M., Mietke, A., Müller, P. & Otto, O. Statistics for realtime deformability cytometry: clustering, dimensionality reduction, and significance testing. Biomicrofluidics 12, 042214 (2018).
Wilks, S. S. The largesample distribution of the likelihood ratio for testing composite hypothesis. Ann. Math. Stat. 9, 60–62 (1938).
Acknowledgements
We thank Paula Büttner, Sophie Schilling and Patrick Bohn for experimental support and are grateful for valuable discussions with Mihaela Delcea. We kindly thank Jochen Guck for the glass cuvette loan. We gratefully acknowledge financial support from the German Federal Ministry of Research and Education (ZIK grant to O.O. under grant agreement 03Z22CN11) and the German Center for Cardiovascular Research (postdoc startup grant 81X3400107 to O.O.). This work has also been funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) 231396381/GRK1947.
Author information
Authors and Affiliations
Contributions
O.O. conceived the project. F.C. developed the experimental setup. F.C. performed finite element method simulations. F.C. and M.H.P. carried out rheological buffer characterization. P.N. analyzed interface stability. F.C., M.H.P., B.F. and D.B. designed and performed experiments on HL60 and HEK293T cells. V.A.D. and R.H.P. developed the spheroid assay. F.C. and M.H.P. carried out cell and spheroid experiments. Y.K. performed compound treatment. F.C., M.H.P., B.F. and O.O. performed statistical data analysis. O.O. supervised the project. F.C. and O.O. wrote the manuscript. All authors reviewed the manuscript.
Corresponding author
Ethics declarations
Competing interests
M.H.P., P.N., V.A.D., D.B., R.H.P., and Y.K. declare no competing interest. O.O. is shareholder of Zellmechanik Dresden GmbH distributing realtime deformability cytometry. F.C., B.F., and O.O. filed a patent application for virtual fluidic channels (Applicant: University Greifswald; inventors: Fabian Czerwinski, Bob Fregin, and Oliver Otto; PCT Application; application number: PCT/EP2018/075605).
Additional information
Peer review information Nature Communications thanks Dino Di Carlo and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Panhwar, M.H., Czerwinski, F., Dabbiru, V.A.S. et al. Highthroughput cell and spheroid mechanics in virtual fluidic channels. Nat Commun 11, 2190 (2020). https://doi.org/10.1038/s41467020158139
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467020158139
This article is cited by

Fluorescence imaging deformability cytometry: integrating nuclear structure with mechanical phenotyping
MedX (2023)

Comparative Study of Two Common In Vitro Models for the Pancreatic Islet with MIN6
Tissue Engineering and Regenerative Medicine (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.