Abstract
When assembling individual quantum components into a mesoscopic circuit, the interplay between Coulomb interaction and charge granularity breaks down the classical laws of electrical impedance composition. Here we explore experimentally the thermal consequences, and observe an additional quantum mechanism of electronic heat transport. The investigated, broadly tunable testbed circuit is composed of a micronscale metallic node connected to one electronic channel and a resistance. Heating up the node with Joule dissipation, we separately determine, from complementary noise measurements, both its temperature and the thermal shot noise induced by the temperature difference across the channel. The thermal shot noise predictions are thereby directly validated, and the electronic heat flow is revealed. The latter exhibits a contribution from the channel involving the electrons’ partitioning together with the Coulomb interaction. Expanding heat current predictions to include the thermal shot noise, we find a quantitative agreement with experiments.
Introduction
Heating generally drives the crossover from quantum to classical behaviors; nevertheless, heat itself is ruled by quantum mechanics. In recent years, experimental explorations of quantum thermal phenomena have been emerging at a rising pace^{1,2,3}. In particular, the quantum of thermal conductance, a universal basic building block of heat quantum transport, is now firmly established for bosons^{1,4}, fermions^{5,6}, and quasiparticles that may be anyons^{7}, as well as up to macroscopic^{8} and room temperature^{9,10} scales. However, despite the strong influence of Coulomb interaction on electricity in small quantum circuits^{11,12,13,14}, its impact on the quantum transport of heat remains barely explored experimentally^{15,16,17}. In a first step for perfectly ballistic circuits, where there is no backscattering along any of the connected electronic channels, a recent observation^{16} was made of the predicted^{18} heat Coulomb blockade taking place without any concomitant reduction of the electrical conductance. In this limit and at low temperatures, the Coulomb interaction manifests itself as the systematic suppression of a single channel for the evacuation of heat from a small circuit node^{16,18}. Here we address elementary quantum circuits including one generic electronic channel of arbitrary electron transmission probability. An unexpected increase in the flow of heat is observed and quantitatively accounted for by an additional quantum heat transport mechanism, involving the association of shot noise and Coulomb interaction.
We obtain the heat current–temperature characteristics by controllably injecting a dc power into a small floating circuit node connecting a quantum channel to a linear resistance, and by monitoring in situ the resulting increase in the electrons’ temperature. A complication is that the partition of electrons in the generic channel breaks the Johnson–Nyquist proportionality between excess noise and node temperature increase^{19,20}, which was previously used for the thermometry of ballistic circuits^{5,6,7,16,17}. We overcome this difficulty with an experimental procedure involving complementary measurements of both the auto and crosscorrelations of electrical fluctuations. This provides us, separately, with the local electronic temperature in the metallic node, as well as with the thermal shot noise. The latter is found in good agreement with predictions derived within the scattering approach^{19,21}, in which Coulomb effects have been encapsulated in the temperaturedependent conductance (reduced by the dynamical Coulomb blockade^{11}). The node temperature increase, both in terms of injected power and electron transmission probability across the channel, exposes an additional heat current contribution involving thermal shot noise.
Results
Testbed for electronic channels in dissipative environments
An ebeam micrograph of the device is shown in Fig. 1a together with a schematic representation of the measurement setup. The small floating circuit node that is heated is materialized by the central micronscale metallic island (in brighter gray), of separately characterized selfcapacitance \(C\simeq 3.1\,{\mathrm{{fF}}}\). It is in essentially perfect electrical contact with a standard Ga(Al)As twodimensional (2D) electron gas underneath the surface. The 2D gas is immersed in a perpendicular magnetic field corresponding to the integer quantum Hall regime at filling factor two. In this regime, the current flows along two adjacent quantum Hall edge channels depicted by lines with arrows indicating the propagation direction. Three quantum point contacts (QPCs) are formed in the 2D electron gas by applying negative voltages on surface split gates coupled capacitively. A single (spinpolarized) short electronic channel of tunable transmission probability \(\tau \in [0,1]\) is implemented at the left QPC. The top and right QPCs are tuned to a different, ballistic regime: they are set to fully transmit, respectively, \({N}_{1}\) and \({N}_{2}\) channels forming together an adjustable linear resistance^{22,23}\(R={R}_{{\rm{K}}}/N\), with \({R}_{{\rm{K}}}=h/{e}^{2}\) the electrical resistance quantum (\(h\) the Planck constant and \(e\) the electron charge) and \(N={N}_{1}+{N}_{2}\). Further away, the quantum Hall channels are connected to large electrodes at base temperature \(T\simeq 8\, {\mathrm{{mK}}}\), represented in Fig. 1a by gray rectangles.
Electronic heat flow determination
The electrons within the central island are heated to \({T}_{\Omega }\) by dissipating a known Joule power \({P}_{{\rm{J}}}\simeq ({N}_{1}{V}_{1}^{2}+{N}_{2}{V}_{2}^{2})/2{R}_{{\rm{K}}}\), with \({V}_{1}\) (\({V}_{2}\)) the voltage applied to the top (right) large electrode (Methods). The island’s dc voltage is pinned to \(\langle {V}_{\Omega }\rangle =0\), by imposing \({N}_{1}{V}_{1}={N}_{2}{V}_{2}\), such that the generic channel experiences a pure temperature bias \({T}_{\Omega }T\) without dc voltage. As illustrated in Fig. 1b, energy conservation in the stationary regime implies \({P}_{{{J}}}={J}_{{{Q}}}^{{\rm{el}}}+{J}_{{{Q}}}^{{\rm{ph}}}\), with \({J}_{{{Q}}}^{{\rm{el}}}\) being the heat flow across the connected electronic channels and \({J}_{{{Q}}}^{{\rm{ph}}}\) the heat transferred from the electrons within the island to the phonons. In practice, electron–phonon heat transfers are negligible only for \({T}_{\Omega }\ {\lesssim}\ 20\,{\mathrm{{mK}}}\)^{16}. However, as \({J}_{{{Q}}}^{{\rm{ph}}}\) only depends on temperatures (\({T}_{\Omega }\), \(T\)), and not on the connected electronic channels (\(\tau\), \(N\)), it can be calibrated by tuning the circuit to the ballistic regime (\(\tau \in \{0,1\}\)). Using the previously established heat Coulomb blockade predictions for ballistic channels^{16,18}, we find that all the data with \(\tau \in \{0,1\}\), \(N\in \{2,3,4\}\) and \(T\in \{8,16\}\) mK can be accurately reproduced using the same \({J}_{{{Q}}}^{{\rm{ph}}}\simeq 2.7\times 1{0}^{8}\left({T}_{\Omega }^{5.7}{T}^{5.7}\right)\,{\mathrm{W}}\) (Methods). At intermediate transmission probability (\(0\ {<}\ \tau \ {<}\ 1\)), the unknown electronic heat flow is then obtained by subtracting the above \({J}_{{{Q}}}^{{\rm{ph}}}\) from the injected Joule power (\({J}_{{{Q}}}^{{\rm{el}}}={P}_{{{J}}}{J}_{{{Q}}}^{{\rm{ph}}}\)).
Local temperature increase measurement
The island’s electronic temperature \({T}_{\Omega }\) is determined from the lowfrequency (MHz) current fluctuations measured on the top (1) and right (2) large electrodes (Methods). The excess auto and crosscorrelation spectral density, from which the zerobias offset is removed, are plotted in Fig. 1c versus \({V}_{1}\) for the illustrative configuration \({N}_{1}={N}_{2}=1\) at \(\tau \sim 0.5\). In a nutshell, combining these data gives us access separately to the current noise sources originating from the QPC hosting a single generic channel (\({S}_{{\rm{qpc}}}\)) and from the ballistic channels (\({S}_{{\rm{ball}}}\) per channel), both shown in Fig. 1d. This is possible because these two noise sources contribute with the same sign to the experimental autocorrelation signal, while with an opposite sign to the crosscorrelation (Methods). The temperature \({T}_{\Omega }\) is then obtained using solely the ballistic noise source \({S}_{{\rm{ball}}}\), directly resulting from the thermal fluctuations of the electronic states’ population in the baths. This robust connection manifests itself as a straightforward, and previously used^{5,6,7,16,17}, generalization of the fluctuationdissipation relation for the thermal noise \({S}_{{\rm{ball}}}=4{k}_{{\rm{B}}}\bar{T}/{R}_{{\rm{K}}}\), where \(\bar{T}=({T}_{\Omega }+T)/2\) is the average temperature^{19,24}. In practice, the excess noise data (with respect to \({V}_{1,2}=0\)) gives us access to the temperature increase \({T}_{\Omega }T\), while \(T\) is separately measured (Methods).
Shot noise induced by a temperature difference
Generic channels driven outofequilibrium are generally expected to exhibit, in addition to the average thermal noise, a shot noise induced by the electron partitioning into a transmitted electron and a reflected electron^{19,21}. In particular, the current noise spectral density at low frequencies (\(\omega \ll {k}_{{\rm{B}}}T/\hslash\)), for a single channel of transmission probability \(\tau\), reads^{19}:
with \({f}_{{\rm{T}},{{\rm{T}}}_{\Omega }}(E)\) the Fermi distributions in the connected baths at different temperatures and/or voltages. The average thermal noise and the shot noise are, respectively, the first and second term on the righthand side of Eq. (1). Whereas the shot noise induced by either a voltage difference or a frequency irradiation is experimentally well established (see references in ref. ^{19} and also ref. ^{25}), the thermal shot noise resulting from the partition of electrons in the sole presence of a temperature difference was observed only recently^{20}. Although convincing, this observation did not allow for a onetoone comparison of the individual data points with the theory, because the possibly multiple electronic channels were incompletely characterized by the measurement of their parallel conductance. In contrast, in the present work with a single generic channel, the QPC conductance \({G}_{{\rm{qpc}}} = \tau {e}^{2}/h\) completely determines the transmission probability \(\tau\). In Fig. 2a, following ref. ^{20}, we focus on the thermal shot noise \({\Delta} {S}_{{\rm{qpc}}}\) obtained by removing the average Johnson–Nyquist noise (\(\Delta {S}_{{\rm{qpc}}}={S}_{{\rm{qpc}}}{4k}_{{\rm{B}}}\bar{T}\tau /{R}_{{\rm{K}}}\)). The \(\Delta {S}_{{\rm{qpc}}}\) data at \({N}_{1}={N}_{2}=1\) (symbols) are plotted versus \({T}_{\Omega }\) for several gate voltage tunings of the singlechannel QPC. The predictions (continuous lines), calculated without any adjustable parameter using Eq. (1), closely match the data (for control experiments, see Supplementary Fig. 1 at other \(\{{N}_{1},{N}_{2}\}\) and Supplementary Fig. 2 at a larger base temperature \(T\simeq 16\) mK). Note that the simultaneously measured \({G}_{{\rm{qpc}}} = \tau {e}^{2}/h\) depends on the temperatures \(T\) and \({T}_{\Omega}\), because of the quantum backaction of the series \({\mathrm{{RC}}}\) circuit^{13} also referred to as the dynamical Coulomb blockade^{11}. Remarkably, we find that the effect of Coulomb interaction is accurately encapsulated, at experimental resolution, into the renormalized \(\tau\) injected in Eq. (1). Figure 2b directly reveals the partition origin of the shot noise induced by a temperature difference. The data points represent this experimental shot noise renormalized by the predicted, \(\tau\)independent temperature function \({\mathcal{F}}({T}_{\Omega },T)=(2/{R}_{{\rm{K}}})\int {\mathrm{d}}E\;{\left[{f}_{{{\rm{T}}}_{\Omega }}(E){f}_{{\rm{T}}}(E)\right]}^{2}\). The good agreement observed between \(\Delta {S}_{{\rm{qpc}}}/{\mathcal{F}}\) and \(\tau (1\tau )\) attests of the underlying partition mechanism.
Electronic heat flow from a small quantum circuit node
We now address the electronic flow of heat across the QPC and ballistic channels. In conductors, the thermal conductance \({G}_{{{Q}}}\) is frequently found to be directly proportional to the electrical conductance \({G}_{{\rm{el}}}\), through the socalled Wiedemann–Franz (WF) law \({G}_{{{Q}}}={\mathcal{L}}{G}_{{\rm{el}}}\) with \({\mathcal{L}}={\pi }^{2}{k}_{{\rm{B}}}^{2}/3{e}^{2}\) the Lorenz number. While this relation holds between the quantum of thermal and electrical conductances, it generally breaks down in quantum circuits assembled from several interconnected channels. In particular, it was shown that the thermal conductance from a small, heated circuit node connected by ballistic channels is reduced from the WF expectation by precisely one quantum of thermal conductance at low temperatures^{16,18}, whatever the total number of channels. With such a fixed reduction, the increment by \({\mathcal{L}}/{R}_{{\rm{K}}}\) of the thermal conductance when adding an extra ballistic channel (starting from at least one) nevertheless follows the WF relation. Is this also the case if the electrical conductance is increased continuously, by sweeping the transmission probability across an electronic channel from \(\tau =0\) to 1? The answer is no, as we will now show.
Figure 3a exhibits as symbols, versus \({T}_{\Omega }\), the experimental electronic heat flow \({J}_{{{Q}}}^{{\rm{el}}}\) normalized by the quantum limit per channel \({J}_{{{Q}}}^{{\rm{lim}}}={\pi }^{2}{k}_{{\rm{B}}}^{2}({T}_{\Omega}^{2}{T}^{2})/6h\), for different circuit settings spanning the full range of \(\tau\) at both \(N=2\) and \(N=3\) (see Supplementary Fig. 3b for \(N=4\), and Supplementary Fig. 4 for a control experiment at \(T\simeq 16\,{\mathrm{{mK}}}\)). The three thick black continuous lines display the full, temperaturedependent heat Coulomb blockade prediction for two (bottom), three (middle), and four (top) ballistic channels^{18} (Methods). Note the small, predicted deviations developing with temperature from the complete heat Coulomb blockade of a single channel (\({J}_{{{Q}}}^{{\rm{el}}}/{J}_{{{Q}}}^{{\rm{lim}}}=N1\)) that only applies in the limit of low temperatures \({T}_{\Omega },T\ll \hslash /{k}_{{\rm{B}}}RC\). Open and full circles (full diamonds) are data points obtained for \(N=2\) (\(N=3\)) ballistic channels, with different settings of the generic channel encoded by different colors. The dashed lines represent linear interpolations between ballistic predictions at \(N\) and \(N+1\) weighted, respectively, by \(1\tau\) and \(\tau\) measured for the compared data (same color). For example, the brown dashed line in the top part of Fig. 3a (closest to \({J}_{{{Q}}}^{{\rm{el}}}/{J}_{{{Q}}}^{{\rm{lim}}} \sim 2.5\)) is given by \(\tau ({T}_{\Omega })\) times the prediction for three ballistic channels (thick black line near \({J}_{{{Q}}}^{{\rm{el}}}/{J}_{{{Q}}}^{{\rm{lim}}} \sim 2\); Methods) plus \(1\tau ({T}_{\Omega })\) times the prediction for four ballistic channels (thick black line near \({J}_{{{Q}}}^{{\rm{el}}}/{J}_{{{Q}}}^{{\rm{lim}}} \sim 3\)), with \(\tau ({T}_{\Omega })\) the renormalized conductance simultaneously measured during the acquisition of the top brown data points of corresponding \({T}_{\Omega }\) (in practice a linear interpolation is performed between discrete measurements of \(\tau ({T}_{\Omega })\)). The difference between dashed lines and data points is particularly significant at intermediate \(\tau\). This shows that the thermal conductance increase does not reduce to a linear, WFlike, function of the electrical conductance. In contrast, quantitative predictions based on the Langevin approach in ref. ^{18} but including the partition noise from the generic channel (colored continuous lines, Methods) lie close to the data, without any adjustable parameter. At low temperatures \({T}_{\Omega },T\ll \hslash /{k}_{{\rm{B}}}RC\), the difference between theory (thy) predictions \({J}_{{{Q}}}^{{\rm{thy}}}\) and the WF extension (linear in \(\tau\)) of heat Coulomb blockade predictions for ballistic channels \((N+\tau 1)\times {J}_{{{Q}}}^{{\rm{lim}}}\), reads:
Note that \({J}_{{{Q}}}^{{\rm{thy}}}=0\) for \(N=0\) at low temperatures, whatever the value of \(\tau\) (see refs. ^{26,27,28} for the electrons’ state preservation concomitant to the absence of heat transfers). The \(\tau (1\tau )\) numerator attests of the role of electron partition in this additional heat transport mechanism. We also point out that this heat current contribution vanishes at higher temperatures, when Coulomb effects become negligible (Methods). This shows straightforwardly the essential role of Coulomb interaction, which combines with electron partition into a different form of quantum heat transport. Figure 3b provides direct experimental evidences for an underlying partition mechanism (see also Supplementary Fig. 3a, c), by subtracting from the renormalized electronic heat flow at \(N=2\) (symbols in Fig. 3a) the corresponding WF (linear) interpolation (dashed lines in Fig. 3a). Focusing here on the temperature range \({T}_{\Omega }\in [17,65]\) mK where measurements are most accurate (see error bars in Fig. 3a), a convincing agreement is found with \(\tau (1\tau )/(2+\tau )\) plotted as a continuous line versus \(\tau\).
Discussion
We have experimentally investigated the heat flow and thermally induced shot noise in an elementary quantum circuit composed of one small metallic node (island) connected by several ballistic channels and by one generic electronic channel of arbitrary electron transmission probability. Applying a temperature bias, without dc voltage across the generic channel, we measured the thermal shot noise^{20} and determined the overall electronic heat flow from the island. The former is found in direct quantitative agreement with thermal shot noise predictions computed using the known transmission probability^{19}. The latter displays an additional heat flow contribution. The underlying mechanism involves in particular the Coulomb charging energy of the island, which effectively freezes its total charge at low temperatures and thereby induces correlations between the heat carrying electrical current fluctuations propagating along the connected channels^{18} (Methods). In a fully ballistic circuit (without thermal shot noise), these correlations amount to the recently observed systematic blockade of a single channel for the flow of heat, independently of the total number of channels^{16,18}. Here, with a generic channel, a thermal shot noise is impinging on the island and fractionalized among all the outgoing channels by the frozen island charge imposed by Coulomb interaction^{29}. This combination of Coulomb interaction and thermal shot noise underpins the presently observed additional heat transport mechanism (Methods).
Advancing our understanding of the mechanisms of quantum heat transport and establishing the thermal shot noise contribution is essential for exploiting heat and noise to unveil exotic physics^{17,30,31}, and is bound to play a role in the thermal and signal to noise management of future quantum devices. The present work also demonstrates measurement strategies widening the range of experimental systems eligible for thermal explorations: by exploiting complementary auto and crosscorrelation measurements of the electrical fluctuations, we have shown that the different sources of noise can be accessed separately. We expect that such advanced combinations of fluctuation measurements will play an increasing role in the thermal and noise investigations of quantum circuits.
Methods
Sample
The Al(Ga)As 2DEG has an electron density of \(2.5\times 10^{11}\,{\mathrm{{cm}}}^{2}\), a mobility of \(1{0}^{6}\, {\mathrm{{cm}}}^2\,{\mathrm{V}}^{1}\,{\mathrm{s}}^{1}\) and is located 105 nm below the surface. The central island is formed from a metallic layering of nickel (30 nm), gold (120 nm), and germanium (60 nm), which is thermally annealed at 440 °C for 50 s to make an electrical contact with the 2DEG. The two quantum Hall edge channels at filling factor \(\nu =2\) are found in near perfect contact with the island, with a reflection probability below \(6\times 10^{3}\) (see Methods in ref. ^{14} for a detailed description of the characterization procedure). The short \({\sim} 1\ \upmu{\mathrm{m}}\) distance between metallic island and QPC combined with the low temperatures (\({T}_{\Omega }\ {\lesssim} \ 80\) mK) ascertains that the interaction between copropagating channels can be safely ignored (see e.g. ref. ^{32}), as in previous works with the same sample^{14,23,33,34,35}. The selfcapacitance of the island \(C\simeq 3.1\) fF (corresponding to a charging energy \({E}_{{\rm{C}}}={e}^{2}/2C\approx {k}_{{\rm{B}}}\times 0.3\,{\mathrm{K}}\)) is obtained from standard Coulomb diamond measurements (with all channels connected to the device tuned in the tunnel regime).
Noise measurement setup
The timedependent current fluctuations \(\delta {I}_{1}(t)\) and \(\delta {I}_{2}(t)\) impinging, respectively, on electrodes 1 and 2 are first amplified with a cryogenic amplifier located on the 4K stage of a dilution refrigerator, and with a room temperature amplifier. They are then digitized at 10 Mbit/s and sent to a computer. The Fourier auto and crosscorrelations analysis are performed over a 180 kHz bandwidth centered on \(0.855\) MHz (the resonant frequency of the \({\mathrm{{LC}}}\) oscillators shown in Fig. 1a). The amplification gains \({G}_{1,2}^{{\rm{amp}}}\) are separately calibrated from the same standard shotnoise vs voltage bias measurements used to determine the base temperature \(T\) (see corresponding section). We find that \({G}_{1,2}^{{\rm{amp}}}\) are stable along each run, but slightly different from cooldown to cooldown. Averaging 862 (2840) shot noise vs voltage bias sweeps, the statistical uncertainty on \({G}_{1,2}^{{\rm{amp}}}\) is below \(0.09 \%\) (\(0.04 \%\)) for the first (second) experimental run shown here. The crosscorrelation gain \({G}_{{\rm{X}}}^{{\rm{amp}}}\) is also impacted by the matching between the two resonators. For a perfect match, \({G}_{{\rm{X}}}^{{\rm{amp}}}=\sqrt{{G}_{1}^{{\rm{amp}}}{G}_{2}^{{\rm{amp}}}}\). In general, a correction factor \({c}_{12}\) needs to be introduced \({G}_{{\rm{X}}}^{{\rm{amp}}}=\sqrt{{G}_{1}^{{\rm{amp}}}{G}_{2}^{{\rm{amp}}}}\times {c}_{12}\). This factor \({c}_{12}\) is experimentally characterized at \(\tau =0\) (\({N}_{1,2}\,{\ne} \,0\)) from the robust relation \(\Delta {S}_{11}=\Delta {S}_{22}=\Delta {S}_{12}\), which directly results from the negligible charge accumulation on the island at the measurement frequencies. In practice, we find an essentially perfect resonators’ match (\({c}_{12}\approx 1.000\) and 0.993 for the first and second cooldown, respectively).
Dissipated Joule power
The bulk of the Joule power dissipated within the electronic fluid in the metallic island is given by the expression \({P}_{{\rm{J}}}\simeq ({N}_{1}{V}_{1}^{2}+{N}_{2}{V}_{2}^{2})/2{R}_{{\rm{K}}}\). We also include the small additional contributions \({P}_{{\rm{J}}}^{{\rm{ac}}}\) due to the extra power dissipated from the small ac voltages \({V}_{1,2,3}^{{\rm{ac}}}\simeq 0.23\ \upmu {{\rm{V}}}_{{\rm{rms}}}\) applied (at different low frequencies) to the three source electrodes (to simultaneously measure with lockin the conductances across each of the three QPCs), as well as a separately characterized small triboelectric voltage from the pulse tube vibrations specifically developing on the source electrode 1 (feeding the top QPC) \({V}_{1}^{{\rm{tribo}}}\simeq 0.4\ \upmu {{\rm{V}}}_{{\rm{rms}}}\):
In practice, \({P}_{{\rm{J}}}^{{\rm{ac}}}\in [2,6]\) aW is below 1% of \({P}_{{\rm{J}}}\) at \({T}_{\Omega }\ {\gtrsim} \ 20\,{\mathrm{{mK}}}\). It corresponds to a temperature increase in the island of \({\sim} 0.3\,{\mathrm{{mK}}}\) at zero dc bias (see section Base electron temperature). Note that we avoid possible mismatch from the thermoelectric voltage developing along the measurement lines by applying a current dc bias. It is converted onchip into a voltage exploiting the welldefined quantum Hall resistance \({R}_{{\rm{K}}}/\nu\) connecting current biased electrodes and cold electrical grounds.
Base electron temperature
The base electronic temperature \(T\) is extracted from standard shotnoise measurements, applying a dc bias voltage directly to a QPC set to a transmission probability of one half, with the floating island bypassed using side gates (see Methods in ref. ^{34} for further details).
Due to the small \({P}_{{\rm{J}}}^{{\rm{ac}}}\) (see section Dissipated Joule power), the temperature of the floating island is slightly higher than \(T\) even in the absence of a dc voltage. This small temperature increase is obtained by measuring the crosscorrelations at zero dc bias \({V}_{1}={V}_{2}=0\) (carefully calibrating instrumental offsets just before and after each measurement sequence), from the relation:
which straightforwardly relies on the generalized fluctuationdissipation relation. Although there are deviations from the generalized fluctuationdissipation relation in the presence of a generic channel, as studied in this work, this approximation is excellent for small \({T}_{\Omega }({V}_{1,2}=0)T\ll T\) such as in the present case. We find \({T}_{\Omega }({V}_{1,2}=0)T \sim 0.3\, {\mathrm{{mK}}}\) (always below \(0.6\, {\mathrm{{mK}}}\)), consistent with expectations based on the value of \({P}_{{\rm{J}}}^{{\rm{ac}}}\) given by Eq. (3). This small temperature difference is included in the experimental determination of \({T}_{\Omega }\).
Excess electron temperature and shot noise
This section details how are obtained the excess electron temperature, \(\Delta {T}_{\Omega }={T}_{\Omega }{T}_{\Omega }({V}_{1,2}=0)\), and the resulting excess noise generated across the generic QPC, \({S}_{{\rm{qpc}}}^{{\rm{exc}}}=\langle \delta {I}_{{\rm{qpc}}}^{2}\rangle \langle \delta {I}_{{\rm{qpc}}}^{2}\rangle ({V}_{1,2}=0)\). A schematic representation of the circuit is shown in Fig. 4 with arrows indicating the chirality also corresponding to the convention used for positive currents. The large electrodes labeled \({E}_{{{n}}}\) (\(n\in \{1,2\}\)) include each a measurement electrode \({M}_{{{n}}}\) and a voltage biased source electrode \({S}_{{{n}}}\). The floating central metallic node is labeled \(\Omega\).
First, let us separately consider a current fluctuation \(\delta {I}_{{\rm{qpc}}}\) generated across the generic QPC (see Fig. 4), and determine the resulting current fluctuations \(\delta {I}_{{{M1}},{{M2}}}^{{\rm{qpc}}}\) impinging on the measurement electrodes \({M}_{1,2}\). As the corresponding charge accumulated in the island relaxes very fast compared to the measurement frequencies (\(1/{R}_{{\rm{K}}}C \sim 10\ {\rm{GHz}}\gg 1\,{\mathrm{{MHz}}}\)), the current \(\delta {I}_{{\rm{qpc}}}\) injected in the island is compensated by the outgoing current from the resulting voltage fluctuation \(\delta {V}_{\Omega }\) of the floating island. This reads \(\delta {I}_{{\rm{qpc}}}=(N+\tau )\delta {V}_{\Omega }/{R}_{{\rm{K}}}\) (for a treatment of charge relaxation at arbitrary frequencies see section Heat Coulomb blockade predictions). Then, \(\delta {I}_{{{M}}1(2)}^{{\rm{qpc}}}={N}_{1(2)}\delta {V}_{\Omega }/{R}_{{\rm{K}}}=\delta {I}_{{\rm{qpc}}}{N}_{1(2)}/(N+\tau )\). Consequently, the QPC noise’s contribution to the autocorrelation signal is
and its contribution to the crosscorrelation signal is
Second, we separately consider a current fluctuation \(\delta {I}_{{\rm{j}}}^{\Omega \to }\) emitted from the island, by the thermal fluctuations of electronic states’ population at \({T}_{\Omega }\), into a ballistic channel \(j\). From the fast charge relaxation of the island pointed out in the previous paragraph, one obtains \(\delta {V}_{\Omega }/{R}_{{\rm{K}}}=\delta {I}_{{\rm{j}}}^{\Omega \to }/(N+\tau )\). On the one hand, the current fluctuation measured on the electrode \({M}_{1}\) if the channel \(j\) propagates toward the electrode \({M}_{2}\) (\(j\in {M}_{2}\)) is then \(\delta {I}_{{\rm{M1}}}^{\Omega \to 2}={N}_{1}/(N+\tau )\delta {I}_{{\rm{j}}\in {\rm{M}}2}^{\Omega \to }\). The corresponding autocorrelation signal on \({M}_{1}\), resulting from the thermal current fluctuations emitted toward \({M}_{2}\) (summing all \(j\in {M}_{2}\)) therefore reads:
where the unimportant channel index \(j\) is omitted in \(\langle {(\delta {I}^{\Omega \to })}^{2}\rangle \equiv \langle {(\delta {I}_{{\rm{j}}}^{\Omega \to })}^{2}\rangle\) (independent of \(j\)). On the other hand, the current fluctuation measured on the electrode \({M}_{1}\) if the channel \(j\) is also connected to the electrode \({M}_{1}\) (\(j\in {M}_{1}\)) includes both the direct term \(\delta {I}_{{\rm{j}}\in {\rm{M}}1}^{\Omega \to }\) and the smaller \(\delta {V}_{\Omega }\) contribution: \(\delta {I}_{{\rm{M}}1}^{\Omega \to 1}=\left[1{N}_{1}/(N+\tau )\right]\delta {I}_{{\rm{j}}\in {\rm{M}}1}^{\Omega \to }\). As a result
and
Summing up the independent contributions from the QPC (\(\delta {I}_{{\rm{qpc}}}\)) and from all ballistic channels (emitted \(\delta {I}_{{{j}}}^{\Omega \to }\) and absorbed \(\delta {I}_{{{j}}}^{{E}_{n}\to }\)), one straightforwardly obtains for the autocorrelation signal:
with \({S}_{{\rm{offset}}1(2)}\) a noise offset mostly corresponding to the amplification chain, and also including the thermal noise along the \(2{N}_{1(2)}\) reflected channels and along the \(2\) quantum Hall channels propagating from measurement (M) to source (S) contacts (for the experimental bulk filling factor \(\nu =2\); see Fig. 4). Similarly, one gets for the crosscorrelation signal:
Focusing on the excess signal with respect to \({V}_{1,2}=0\), one obtains from Eqs. (10) and (11):
with \({S}_{{\rm{ball}}}^{{\rm{exc}}}=\langle {(\delta {I}^{\Omega \to })}^{2}\rangle \langle {(\delta {I}^{\Omega \to })}^{2}\rangle ({V}_{1,2}=0)\) the excess noise generated across one ballistic channel. From the Johnson–Nyquisttype relation well established in the ballistic case^{5,6,7,16,17,18} \(\langle {(\delta {I}^{\Omega \to })}^{2}\rangle =2{k}_{{\rm{B}}}{T}_{\Omega }/{R}_{{\rm{K}}}\), the excess island’s temperature reads:
Solving Eqs. (10) and (11) also provides \({S}_{{\rm{qpc}}}^{{\rm{exc}}}\):
Heat Coulomb blockade predictions
In this section we derive the predictions shown as continuous lines in Fig. 3 and Supplementary Figs. 3 and 4, for the electronic flow of heat \({J}_{{{Q}}}^{{\rm{el}}}\) in the presence of a generic quantum channel. We follow the Langevin approach developed for ballistic systems in ref. ^{18}, and expand it to the case where the current is partially reflected with a probability \(1\tau\) on a QPC inserted along one of the channels (the other channels remaining ballistic, see schematic in Fig. 4). The three main differences with ref. ^{18} are: (i) the symmetry between channels is broken, (ii) a partition noise emerges at the generic QPC, (iii) the transmission probability \(\tau\) depends on the temperatures due to dynamical Coulomb blockade.
The heat flow \({J}_{{{Qj}}}^{\to }\) propagating in one direction (\(\to\)) along one electronic channel ( \(j\)) is obtained from the timedependent electrical current fluctuations \(\Delta {I}_{{{j}}}^{\to }\) propagating in the same direction at the considered location^{18}:
with \({\langle \rangle }_{{\rm{vacuum}}}\) referring to the vacuum fluctuations at zero temperature.
If \(\Delta {I}_{{{j}}}^{\to }\) directly originates from the large, voltage biased electrodes (\({S}_{1,2,3}\) in \({E}_{1,2,3}\)), then it only includes the emitted thermal current fluctuation \(\delta {I}_{{{j}}}^{{E}_{n}\to }\) (see Fig. 4). These thermal fluctuations are assumed uncorrelated (\(\langle \delta {I}_{{{j}}}^{{E}_{{{n}}}\to }\delta {I}_{{{k}}}^{{E}_{{{m}}}\to }\rangle =0\) for \(j\,{\ne} \,k\) even at \(m=n\)) and of variance given by the usual thermal noise expression at the base temperature \(T\)^{18}:
Note the factor two difference with the standard lowfrequency expression \(2{k}_{{\rm{B}}}T/{R}_{{\rm{K}}}\), in which the contribution at positive and negative frequencies are added. Injecting Eq. (16) into Eq. (15), one obtains the usual expression \({J}_{{{Qj}}}^{\to }={(\pi {k}_{{\rm{B}}}T)}^{2}/6h\).
In contrast to the voltage biased electrodes, the floating metallic node’s electrochemical potential exhibits fluctuations \(\delta {V}_{\Omega }\) (related to charge fluctuations as, e.g., in the voltage probe and dephasing probe models, see ref. ^{19} and references therein). These result in the emission of identical current fluctuations \(\delta {V}_{\Omega }/{R}_{{\rm{K}}}\) in all outgoing channels^{18,19}. Such current fluctuations add up with the thermal emission \(\delta {I}_{{\rm{j}}}^{\Omega \to }\) of electrons from the central node: \(\Delta {I}_{{{j}}}^{\Omega \to }=\delta {I}_{{{j}}}^{\Omega \to }+\delta {V}_{\Omega }/{R}_{{\rm{K}}}\), with \(\langle \delta {I}_{{{j}}}^{\Omega \to }\delta {I}_{{{k}}}^{\Omega \to }\rangle =0\) for \(j\,{\ne} \,k\) and a variance \(\langle {(\delta {I}_{{{j}}}^{\Omega \to })}^{2}\rangle\) given by the same Eq. (16) but with the island temperature \({T}_{\Omega }\) instead of \(T\). The integrand in Eq. (15) therefore includes such correlations as \(\langle \delta {I}_{{\rm{j}}}^{\Omega \to }\delta {V}_{\Omega }\rangle\). These can be obtained from the connection to the island’s charge fluctuations \(\delta Q=C\delta {V}_{\Omega }\) (\(\delta Q=Q\langle Q\rangle\) with \(Q\) the overall charge of the island, and \(C\) its selfcapacitance), which obey the charge conservation relation:
where we separated in the second equality the generic channel labeled with the index \(q\) (first line) from the \(N\) ballistic channels (second line). In channel \(q\), the incoming current fluctuations toward the island \(\Delta {I}_{{{q}}}^{\to \Omega }\) include three contributions:
with the third term corresponding in the Langevin description to an uncorrelated noise source induced by the electrons’ partition at the QPC. At equilibrium (\(T={T}_{\Omega }\)), the Johnson–Nyquist relation at low frequencies imposes \(2\langle {(\delta {I}_{{{q}}}^{{\rm{sn}}})}^{2}\rangle =\tau (1\tau )\times 4{k}_{{\rm{B}}}T/{R}_{{\rm{K}}}\) (the factor two is because positive and negative frequencies are included for this comparison). In the nonequilibrium regime (\(T\,{\ne} \,{T}_{\Omega }\)), the information needed on \(\delta {I}_{{{q}}}^{{\rm{sn}}}\) for the heat current will be directly obtained from energy flow conservation at the input and output of the QPC (see below). Note that we neglect in Eq. (18) the small time delay associated with the round loop path islandQPCisland (a delay of about \(20\) ps using a typical velocity of \(1{0}^{5}\) m/s), and that the transmission probability \(\tau\) is taken as a frequency independent value (that depends on \(T\) and \({T}_{\Omega }\) due to dynamical Coulomb blockade, see e.g. ref. ^{23}). Combining Eqs. (17) and (18) allows us to write \(\delta Q\) as a function of uncorrelated noise sources:
where we introduced \({\tau }_{\Omega }\) defined as the sum of the transmission probabilities of the channels connected to the island:
This straightforwardly makes it possible to formulate the integrands \(\langle {(\Delta {I}_{{{q}}}^{\to \Omega })}^{2}\rangle\) and \(\langle {(\Delta {I}_{{{q}}}^{\Omega \to })}^{2}\rangle\) as functions of uncorrelated noise sources (independently of \(\delta {V}_{\Omega }\)). As an illustration, we obtain for the latter:
where the arbitrary index \(j\) is omitted. The only missing ingredient is \(\delta {I}_{{{q}}}^{{\rm{sn}}}\). As pointed out above, the required information can be obtained most robustly from global heat conservation at the QPC: \({J}_{{{Qq}}}^{{E}_{3}\to }+{J}_{{{Qq}}}^{\Omega \to }={J}_{{{Qq}}}^{\to {E}_{3}}+{J}_{{{Qq}}}^{\to \Omega }\), with \({J}_{{{Qq}}}^{{E}_{3}\to }\) the flow of heat from the large electrode \({E}_{3}\) toward the QPC, \({J}_{{{Qq}}}^{\Omega \to }\) the flow of heat from the island toward the QPC, \({J}_{{{Qq}}}^{\to {E}_{3}}\) the flow of heat from the QPC toward \({E}_{3}\), and \({J}_{{{Qq}}}^{\to \Omega }\) the flow of heat from the QPC toward the island. Using Eq. (15), this equality reads:
Summing up the contributions of all channels and performing the integration in Eq. (15), we obtain for the net heat flow from the metallic island:
with the function \(\Im\) given by
with \(\psi (z)\) the digamma function. Equation (23) was used to calculate the predictions shown as continuous lines in Fig. 3a, Supplementary Fig. 3b and Supplementary Fig. 4.
At \(\tau =0\) or 1, Eq. (23) reduces to the expression derived for a ballistic system^{18} (see Methods in ref. ^{16} for a similar formulation). At high temperatures, Eq. (23) reduces to the noninteracting result matching the widespread Wiedemann–Franz law (without additional contribution from the partition noise):
At low temperatures, Eq. (23) simplifies into:
In this case, in addition to the systematic blockade of one ballistic channel (\(1\)) with respect to the noninteracting case (\({\tau }_{\Omega }\)), we find an additional contribution to the flow of heat whose partition character is signaled by the characteristic \(\tau (1\tau )\) dependence.
Electron–phonon heat transfers
The Fig. 5 displays the amount of heat transferred from electrons in the metallic island to cold phonons at base temperature \(T\simeq 8\, {\mathrm{{mK}}}\). It is obtained by subtracting from the injected Joule power \({P}_{{{J}}}\) the known electronic heat flow \({J}_{{{Q}}}^{{\mathrm{el}}}\) when the circuit is tuned in the ballistic regime (for the subtracted expression of \({J}_{{{Q}}}^{{\rm{el}}}\), see Eq. (23) with \(\tau \in \{0,1\}\) or refs. ^{16,18}). The data from all ballistic configurations (\(N\in \{2,3,4\}\), \(\tau \in \{0,1\}\)) collapse on the same curve, fitted by \({J}_{\,{Q}}^{\mathrm{ph}}\,=\Sigma ({T}_{\Omega }^{\alpha }{T}^{\alpha })\) with \(\Sigma =2.752\times 10^{8}\ {{\rm{W}}\,{\rm{K}}}^{\alpha }\) and \(\alpha =5.709\). We checked that this power law also precisely accounts for \({J}_{\,{Q}}^{\mathrm{ph}}\) at the larger temperature \(T\simeq 16\,{\mathrm{{mK}}}\) (data not shown).
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Schwab, K., Henriksen, E., Worlock, J. & Roukes, M. Measurement of the quantum of thermal conductance. Nature 404, 974–977 (2000).
Giazotto, F. & MartínezPérez, M. J. The Josephson heat interferometer. Nature 492, 401–405 (2012).
Ronzani, A. et al. Tunable photonic heat transport in a quantum heat valve. Nat. Phys. 14, 991–995 (2018).
Timofeev, A. V., Helle, M., Meschke, M., Möttönen, M. & Pekola, J. P. Electronic refrigeration at the quantum limit. Phys. Rev. Lett. 102, 200801 (2009).
Jezouin, S. et al. Quantum limit of heat flow across a single electronic channel. Science 342, 601–604 (2013).
Srivastav, S. et al. Universal quantized thermal conductance in graphene. Sci. Adv. 5, eaaw5798 (2019).
Banerjee, M. et al. Observed quantization of anyonic heat flow. Nature 545, 75–79 (2017).
Partanen, M. et al. Quantumlimited heat conduction over macroscopic distances. Nat. Phys. 12, 460 (2016).
Mosso, N. et al. Heat transport through atomic contacts. Nat. Nanotechnol. 12, 430–433 (2017).
Cui, L. et al. Quantized thermal transport in singleatom junctions. Science 355, 1192–1195 (2017).
Grabert, H. & Devoret, M. (eds) Single Charge Tunneling (Plenum, New York, 1992).
Likharev, K. Singleelectron devices and their applications. Proc. IEEE 87, 606–632 (1999).
Parmentier, F. D. et al. Strong backaction of a linear circuit on a single electronic quantum channel. Nat. Phys. 7, 935–938 (2011).
Jezouin, S. et al. Controlling charge quantization with quantum fluctuations. Nature 536, 58–62 (2016).
Dutta, B. et al. Thermal conductance of a singleelectron transistor. Phys. Rev. Lett. 119, 077701 (2017).
Sivre, E. et al. Heat Coulomb blockade of one ballistic channel. Nat. Phys. 14, 145–148 (2018).
Banerjee, M. et al. Observation of halfinteger thermal Hall conductance. Nature 559, 205–210 (2018).
Slobodeniuk, A., Levkivskyi, I. & Sukhorukov, E. Equilibration of quantum Hall edge states by an Ohmic contact. Phys. Rev. B 88, 165307 (2013).
Blanter, Y. & Büttiker, M. Shot noise in mesoscopic conductors. Phys. Rep. 336, 1–166 (2000).
Lumbroso, O., Simine, L., Nitzan, A., Segal, D. & Tal, O. Electronic noise due to temperature differences in atomicscale junctions. Nature 562, 240–244 (2018).
Martin, T. & Landauer, R. Wavepacket approach to noise in multichannel mesoscopic systems. Phys. Rev. B 45, 1742–1755 (1992).
Jezouin, S. et al. TomonagaLuttinger physics in electronic quantum circuits. Nat. Commun. 4, 1802 (2013).
Anthore, A. et al. Circuit quantum simulation of a TomonagaLuttinger liquid with an impurity. Phys. Rev. X 8, 031075 (2018).
Blanter, Y. M. & Sukhorukov, E. V. Semiclassical theory of conductance and noise in open chaotic cavities. Phys. Rev. Lett. 84, 1280–1283 (2000).
Reydellet, L.H., Roche, P., Glattli, D. C., Etienne, B. & Jin, Y. Quantum partition noise of photoncreated electronhole pairs. Phys. Rev. Lett. 90, 176803 (2003).
Duprez, H. et al. Transmitting the quantum state of electrons across a metallic island with Coulomb interaction. Preprint at https://arXiv.org/abs/1902.07569 (2019).
Idrisov, E., Levkivskyi, I. & Sukhorukov, E. Dephasing in a MachZehnder Interferometer by an Ohmic Contact. Phys. Rev. Lett. 121, 026802 (2018).
Clerk, A., Brouwer, P. & Ambegaokar, V. Interactioninduced restoration of phase coherence. Phys. Rev. Lett. 87, 186801 (2001).
Idrisov, E., Levkivskyi, I. & Sukhorukov, E. Quantum ammeter. Preprint at https://arXiv.org/abs/1906.10902 (2019).
Altimiras, C. et al. Chargeless heat transport in the fractional quantum hall regime. Phys. Rev. Lett. 109, 026803 (2012).
Inoue, H. et al. Proliferation of neutral modes in fractional quantum Hall states. Nat. Commun. 5, 4067 (2014).
leSueur, H. et al. Energy relaxation in the integer quantum Hall regime. Phys. Rev. Lett. 105, 056803 (2010).
Iftikhar, Z. et al. Twochannel Kondo effect and renormalization flow with macroscopic quantum charge states. Nature 526, 233–236 (2015).
Iftikhar, Z. et al. Primary thermometry triad at 6 mK in mesoscopic circuits. Nat. Commun. 7, 12908 (2016).
Iftikhar, Z. et al. Tunable quantum criticality and superballistic transport in a ‘charge’ Kondo circuit. Science 360, 1315–1320 (2018).
Acknowledgements
This work was supported by the French RENATECH network, the national French program Investissements d’Avenir (Labex NanoSaclay, ANR10LABX0035) and the French National Research Agency (projects QuTherm, ANR16CE300010, and SIMCIRCUIT, ANR18CE47001401). We thank Y. Jin for providing the cryogenic HEMTs used for the noise measurements, and E. Sukhorukov for fruitful discussions.
Author information
Authors and Affiliations
Contributions
E.S. and H.D. performed the experiment with inputs from A. Aassime, A. Anthore, and F.P.; A. Anthore, E.S., F.P. and H.D. analyzed the data and expanded the theory with help from A. Aassime; F.D.P. fabricated the sample using developments from A. Anthore; A.C., A.O., and U.G. grew the 2DEG; F.P. led the project and wrote the manuscript with contributions from A. Aassime, A. Anthore, E.S., H.D., and U.G.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks Tomonori Arakawa, Liliana Arrachea and Elke Scheer for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Sivre, E., Duprez, H., Anthore, A. et al. Electronic heat flow and thermal shot noise in quantum circuits. Nat Commun 10, 5638 (2019). https://doi.org/10.1038/s41467019135668
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467019135668
This article is cited by

Direct determination of the topological thermal conductance via local power measurement
Nature Physics (2023)

Quasiparticle Andreev scattering in the ν = 1/3 fractional quantum Hall regime
Nature Communications (2023)

LowTemperature Thermally Induced Noise in the Presence of an AC Voltage Bias
Journal of Low Temperature Physics (2023)

Electric field control of radiative heat transfer in a superconducting circuit
Nature Communications (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.