Skip to main content

Thank you for visiting You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Photonic crystal for graphene plasmons


Photonic crystals are commonly implemented in media with periodically varying optical properties. Photonic crystals enable exquisite control of light propagation in integrated optical circuits, and also emulate advanced physical concepts. However, common photonic crystals are unfit for in-operando on/off controls. We overcome this limitation and demonstrate a broadly tunable two-dimensional photonic crystal for surface plasmon polaritons. Our platform consists of a continuous graphene monolayer integrated in a back-gated platform with nano-structured gate insulators. Infrared nano-imaging reveals the formation of a photonic bandgap and strong modulation of the local plasmonic density of states that can be turned on/off or gradually tuned by the applied gate voltage. We also implement an artificial domain wall which supports highly confined one-dimensional plasmonic modes. Our electrostatically-tunable photonic crystals are derived from standard metal oxide semiconductor field effect transistor technology and pave a way for practical on-chip light manipulation.


When light propagates in media with periodically varying optical properties, a collection of optical phenomena emerges which can be described under the notion of photonic crystal1. Photonic crystals support intriguing states of matter, including topological photonic states2,3,4,5, unidirectional edge modes6,7 and pseudo-magnetic fields for photons8. To date, photonic crystals have been fabricated exclusively in discrete media with built-in local electrodynamics responses9,10,11. Because the photonic crystal effect cannot be readily turned off, conventional systems typically have very limited tunability9.

A promising alternative platform for tunable photonic crystals can be constructed using two-dimensional (2D) van der Waals heterostructures. Unlike conventional materials, van der Waals heterostructures are widely tunable by a variety of readily attainable stimuli, including field-effect, optical pumping12, and mechanical pressure13. Specifically, in monolayer graphene heterostructures, electrostatic gating can be used to greatly modify the optical properties14,15. Under the illumination of infrared (IR) radiation, graphene heterostructures support low-loss surface plasmon polaritons (SPPs) modes that are hybrid excitations of IR photons and Dirac electrons14,16,17,18,19. At a laser frequency ω, the wavelength λp of graphene SPPs scales with the carrier density ns as \(\lambda _{\mathrm{p}} \propto \frac{{v_{\mathrm{F}}\sqrt {n_{\mathrm{s}}} }}{{{\it{\epsilon }}\omega ^2}}\), where \(v_{\mathrm{F}} = 10^6\;{\mathrm{m}}\;{\mathrm{s}}^{ - 1}\) is the Fermi velocity and ε is the dielectric constant for the environment surrounding the graphene layer. By varying ns through field effect, the propagation of SPP waves in graphene can be readily controlled12,20,21,22,23,24,25, making monolayer graphene heterostructures a suitable platform for implementing tunable photonic crystals.

Here, we propose, design and fabricate a tunable photonic crystal for SPPs out of a continuous graphene monolayer. The nanoscale spatial modulation of the graphene optical response is controlled by patterning a periodic structure in the SiO2 gate insulator layer26. Near-field imaging techniques reveal the formation of a complete plasmonic bandgap, in which SPPs propagation is prohibited. In the vicinity of the bandgap, plasmonic density of states shows strong spatial modulations and can be turned on/off and tuned by the applied gate voltage. An artificially designed domain wall in the photonic crystal supports highly confined one-dimensional (1D) plasmonic mode. Our graphene photonic crystal platform provides highly desired tunability for SPPs propagation, and is designed for on-chip in-operando light manipulation.


Modeling of graphene SPP band structure

A schematic of our tunable photonic crystal is shown in Fig. 1a, with a fully encapsulated graphene monolayer on top of a patterned SiO2 gate insulator layer. Due to the presence of the patterned substrate underneath, the graphene carrier density is enhanced at the location of the pillars compared to regions above the voids in SiO2 (Fig. 1a inset and Supplementary Fig. 8). To plan our experimental inquiries into SPPs traveling through gate-tunable photonic crystals, we have numerically explored the SPP dispersion for the platform in Fig. 1a (Supplementary Note 6 and Supplementary Figs. 68). In the photonic crystal areas, SPPs undergo Bragg reflections due to the periodic pattern of ns(r)22, which prompts the formation of a 2D Brillouin zone (BZ) and of plasmonic band structure27,28. In the specific case of graphene, the SPP dispersion critically depends on the gate voltage Vg and the attendant average carrier density \(\bar n_{\mathrm{s}}\). Therefore, we augmented the canonical representation of the SPP dispersion in frequency and wave-vector coordinates (ωk) into a third dimension given by average carrier density \(\bar n_{\mathrm{s}}\) or, equivalently, by the gate voltage Vg (Fig. 1b). A vertical cut parallel to the ωk plane (back panel in Fig. 1b) gives a snapshot of the plasmonic band structure for a specific carrier density \(\bar n_{\mathrm{s}}\). At carrier density \(\bar n_{\mathrm{s}} = 5.4 \times 10^{12}\;{\mathrm{cm}}^{ - 2}\), our simulations predict the opening of a complete plasmonic bandgap around laser frequency 904 cm−1. Provided the carrier density is increased to \(\bar n_{\mathrm{s}} = 6.4 \times 10^{12}\;{\mathrm{cm}}^{ - 2}\), the entire plasmonic band structure shifts toward higher frequencies (Supplementary Fig. 7), so that the plasmonic bandgap frequency becomes 920 cm−1. A horizontal cut parallel to the \(\bar n_{\mathrm{s}} - {\mathbf{k}}\) plane (bottom panel in Fig. 1b) shows the plasmonic wave-vector k as a function of carrier density \(\bar n_{\mathrm{s}}\) at a given laser frequency ω = 904 cm−1. In this latter representation, the plasmonic bandgap is evident for \(\bar n_{\mathrm{s}} = 4.9 - 5.9 \times 10^{12}\;{\mathrm{cm}}^{ - 2}\). At slightly lower carrier density, e.g. \(\bar n_{\mathrm{s}} = 4.5 \times 10^{12}\;{\mathrm{cm}}^{ - 2}\), SPPs reside in the upper plasmonic band but propagating mode is only supported along M direction in the BZ. At slightly higher carrier density, e.g. \(\bar n_{\mathrm{s}} = 6.4 \times 10^{12}\;{\mathrm{cm}}^{ - 2}\), the lower band SPPs only propagate along K direction. The \(\bar n_{\mathrm{s}} - {\mathbf{k}}\) representation is particularly instructive because experimentally we tune the carrier density to explore the SPP band structure at a fixed IR laser frequency (Figs. 2 and 3).

Fig. 1

Graphene photonic crystal. a Schematic of a photonic crystal comprised of a graphene monolayer fully-encapsulated by hexagonal boron nitride on top of an array of SiO2 pillars. Inset, simulated carrier density map ns(r) at average carrier density \(\bar n_{\mathrm{s}} = 4.5 \times 10^{12}\;{\mathrm{cm}}^{ - 2}\), showing two hexagonal-patterned domains separated by an artificial lattice dislocation (domain wall). The lattice periodicity a = 80 nm. The photonic crystal unit cell is marked by a white dashed hexagon. b Calculated plasmonic band structure as a function of wave-vector k and average carrier density \(\bar n_{\mathrm{s}}\). A vertical cut parallel to the \(\omega - {\mathbf{k}}\) plane (back panel) generates the plasmonic band structure at fixed carrier density \(\bar n_{\mathrm{s}} = 5.5 \times 10^{12}\;{\mathrm{cm}}^{ - 2}\). The dashed lines mark the range of a complete plasmonic bandgap. A horizontal cut parallel to \(\bar n_{\mathrm{s}} - {\mathbf{k}}\) plane (bottom panel) generates the plasmonic dispersion as a function of average carrier density \(\bar n_{\mathrm{s}}\) and wave-vector k, at laser frequency ω = 904 cm−1; a complete bandgap is evident for carrier density around \(\bar n_{\mathrm{s}} = 5.5 \times 10^{12}\;{\mathrm{cm}}^{ - 2}\)

Fig. 2

Gate-tunable plasmonic response of a graphene-based photonic crystal. a Schematic of the photonic crystal structure with an engineered domain wall in the middle, highlighted in orange. Color contrast represents carrier density modulation n1,2 in graphene. A gold antenna in the left serves as a plasmon launcher. The scanned area in panel c is marked with a dashed box. K/M directions in BZ are marked with arrows. b Simulated LDOS maps for upper and lower plasmonic bands. c Experimental near-field images s(r,ω) acquired at different gate voltages at T= 60 K and laser frequency ω = 904 cm−1. At Vg = −40 V, only faint plasmonic fringes are observed. At Vg = −60 V, a hexagonal pattern of dark spots emerges. At Vg = −70 V, a 1D domain wall state appears in the middle of the image. At Vg = −90 V, propagating plasmons are launched by the gold antenna on the left. This latter image also reveals a hexagonal pattern of bright spots. Black solid line marks the location of the line profiles in panel d. Scale bar: 400 nm. d Line profiles s(r,ω) taken in the photonic crystal region away from the domain wall. Dotted lines display the corresponding line profiles in un-patterned region. The systematic increase of SPP wavelength λp with carrier density ns matches the expected scaling: \(\lambda _{\mathrm{p}} \propto \frac{{v_{\mathrm{F}}\sqrt {n_{\mathrm{s}}} }}{{{\it{\epsilon }}\omega ^2}}\)

Fig. 3

Gate dependence of the 1D plasmonic domain wall state. a Stacked near-field images (analogous to Fig. 2c) and detailed voltage-dependent contrast across the artificial domain wall (vertical panel) collected at ω = 904 cm−1. Scale bar: 400 nm. b The same data as panel a vertical panel, displayed in 2D false color map of near-field signal s as a function of gate voltages Vg and position x across the domain wall. c Simulated voltage-dependent measurement based on point dipole model. \(\bar n_{\mathrm{s}}\) is the averaged carrier density. The position of the domain wall is marked by an arrow. The lattice periodicity a = 80 nm. d 1D plasmonic dispersion simulation for the structure shown in Fig. 2a. Gray region corresponds to 2D plasmonic modes. The blue solid line highlights the 1D domain wall state

Near-field imaging of surface plasmon polaritons

We employed low-temperature near-field optical microscopy to visualize both propagating and localized SPPs in our photonic crystals. In these experiments, a metallic tip of an atomic force microscope (AFM) is illuminated by focused IR radiation from a laser source. The tip acts as an optical antenna which resonantly enhances the electric field at the apex29. The tip-scattered light is registered by a detector and the amplitude s(r,ω) and phase ϕ(r,ω) of the corresponding near-field signal are extracted by a proper demodulation scheme (Methods). We analyze the near-field amplitude images s(r,ω) (Figs. 2 and 3) which can be viewed as maps of local electric field Ez with ~10 nm spatial resolution. We performed the near-field measurements at T = 60 K to minimize plasmonic losses due to electron–phonon coupling in the graphene layer, thus obtaining SPPs with ballistic propagation18.

Near-field images of SPPs in the photonic crystal are shown in Fig. 2. The scanned area is marked with a dashed box in Fig. 2a. We engineered a domain wall in the middle of this field of view by introducing a shift dislocation of the hexagonal lattice. At gate voltage Vg = −90 V, we observed SPPs launched by the gold antenna on the left and propagating along the photonic crystal (Fig. 2c) (Supplementary Fig. 5). The SPPs have wavelength λp = 160 nm and falls in the lower plasmonic band in Fig. 1b. Propagating SPPs weaken as the gate voltage is lowered down to Vg = −70 V, where we approach the bandgap. At even lower gate voltage Vg = −60 V, we enter the upper plasmonic band. In this latter regime, we observe dark spots forming a hexagonal pattern with the same periodicity as the superlattice. Our analysis below will show that these spots originate from the tip coupling to localized SPPs (Fig. 2b). SPPs are not allowed to propagate along K direction of BZ at Vg = −60 V. At Vg = −40 V, faint plasmon fringes are detected (Fig. 2d). The evolution of SPPs with gate voltage in the photonic crystal regions is summarized in Fig. 2d (Supplementary Figs. 13). Notably, SPPs amplitude in the photonic crystal region is strongly suppressed at Vg = −50 V~−70 V, while their propagation is supported in all other gate voltages (Fig. 2d solid line). Un-patterned regions reveal SPPs fringes at all gate voltages (Fig. 2d dotted line). Our observations together with the simulation in Fig. 1b attest to the opening of a complete plasmonic bandgap at Vg = −60 V~−70 V.

Plasmonic images and local density of states

The spotted near-field images in Fig. 2c can be interpreted as maps of the localplasmonic density of states (LDOS). Formally, LDOS is defined as the imaginary part of the Green’s function \({\mathrm{LDOS}}\left( {{\mathbf{r}},\omega } \right) = {\mathrm{Im}}\{ G({\mathbf{r}},\omega )\}\)26,30 and quantifies the response of the system when driven by a dipole source at frequency ω and position r. The notion of LDOS is commonly employed to describe the various aspects of light-matter interaction including the rate of spontaneous emission28,31,32,33,34. In regions with enhanced LDOS, the dipole source from a near-field tip couples stronger to SPPs, prompting enhanced near-field signal (Supplementary Fig. 11). At the lowest gate voltage Vg = −40 V, the SPPs reside away from the plasmonic bandgap, resulting in near-constant LDOS and therefore near uniform nano-infrared signal. At intermediate gate voltages Vg = −60 V, SPPs occupy the upper plasmonic band with energy proximate to the bandgap (Fig. 1b). Under the latter setting, LDOS at the location of the SiO2 dielectric pillars is suppressed (Fig. 2b top panel), leading to dark spots above the dielectric pillars in near-field images (Fig. 2c). At gate voltage Vg = −70 V, SPPs inhabit inside the plasmonic bandgap but still show lower LDOS on top of the dielectric pillars, due to finite damping rate of graphene SPPs. At the highest attainable gate voltage Vg = −90 V, SPPs reside in the lower plasmonic band (Fig. 1b). Simulation shows a factor of 16 enhancement of the LDOS at the pillar locations (Fig. 2b bottom panel) which is attested by a bright hexagonal contrast in experimental images (Fig. 2c).

It is worth pointing out that the evolution of the local contrast with gate voltages cannot be explained solely by the variation of local conductivity in graphene. The image taken at Vg = −40 V (Fig. 2c) is nearly uniform, even though there is still a variation of local conductivity due to the patterned dielectric layer. Likewise, the image taken at Vg = −90 V (Fig. 2c) shows very weak contrast, even though the variation in conductivity is maximized at the highest gate voltage. The most prominent contrast observed close to the plasmonic bandgap at Vg = −50 V~−70 V confirms that the nano-infrared contrast in our patterned devices is rooted in the variation of LDOS. This conclusion is further attested by simulations that also link the spotted contrast to the variations in the LDOS (Fig. 2b and Supplementary Figs. 9 and 10).

The observed LDOS enhancement factor of 16 is limited in our structures by plasmonic damping rate and could reach even higher values in plasmonic media with suppressed electron-phonon scattering and enhanced quality factor. At low temperature, our plasmonic devices have a plasmonic damping rate around 10 cm−1, which corresponds to quality factor Q= 100 and SPP propagation length 4 um18. When temperature is raised to room temperature, the quality factor decreases down to Q= 25 due to electron-phonon interaction. Thus, the performance of our devices at ambient is not fully satisfactory. Nevertheless, we wish to point out that the plasmonic/photonic platform proposed in our work is universal and should work with other 2D materials that do not suffer from strong electron-phonon scattering at room temperature.

Near-field imaging of plasmonic domain walls

Apart from the 2D SPPs discussed above, we also observed a 1D plasmonic mode confined to the domain wall that we introduced in the middle of the field of view in Fig. 2c. These 1D plasmons have not been previously observed in graphene-based structures and are activated when the gate voltage resides within the plasmonic bandgap, at Vg = −65V for our devices (Supplementary Fig. 2).

The voltage dependence of the 1D plasmons is revealed by scanning the same line across the domain wall while tuning the gate voltage (Fig. 3b). The characteristic bright contrast only appears in a narrow gate range of Vg = −63 V~−70 V, which matches well with the gate voltage of the plasmonic bandgap (Fig. 2c). Near-field simulations based on the point dipole model detailed in Supplementary Note 6 are displayed in Fig. 3c. Our simulations (Fig. 3c) reproduced the emergence of strong plasmonic response localized to the domain wall at Vg = −65 V, and dark spots contrast outside the domain wall (Fig. 3b). We repeated the gate dependence measurements at multiple laser frequencies (Supplementary Fig. 4). These latter data along with the simulations of the 1D plasmonic dispersion (Fig. 3d), allow us to attribute the 1D plasmonic mode to the domain wall state residing within the plasmonic bandgap.


The graphene photonic crystal investigated in this work is unique in multiple ways. First, our photonic crystal system is readily tunable through solid state gating effect. Light-matter interaction in the photonic crystal can be turned on and off using gate voltage. We found that the plasmonic LDOS can be varied by as much as 16-fold by tuning the gate voltage across the bandgap. Second, the pristine nature of the graphene is preserved despite close proximity to the patterned superlattice dielectric. Finally, our devices support 1D plasmonic modes confined to an engineered domain wall. Notably, these domain wall states are valley polarized (helical), in the sense that the state from one valley of the plasmonic band propagates only in one direction. Experimental verification of the valley polarization requires a chiral launcher that selectively couples to a single plasmonic valley and is beyond the scope of this study. Provided the photonic crystal breaks inversion symmetry, these domain wall states can become topologically-nontrivial, protected by valley Chern number27.

Our gate-imprinted platform paves the way to the design of more elaborate infrared circuits that host valley plasmons27,35,36,37,38,39, topological edge states40,41,42,43 and adds to the toolkit of photonic-crystal-controlled light-matter interactions44,45. The top–down fabrication technique for the photonic crystal presented here is fully compatible with the state-of-the-art MOSFET devices, making our system a viable candidate for future electrostatically-reconfigurable plasmonic integrated circuits46. Our patterned dielectric arrays also modify the electronic properties of graphene26 and the interplay between electronic and plasmonic properties would be of interest to future exploration.


Cryogenic near-field imaging techniques

Cryogenic near-field imaging is accomplished using a home-built scattering-type scanning near-field optical microscope (s-SNOM)29. The system is coupled to a continuous-wave CO2 laser (Access Laser). The s-SNOM setup is based on a taping mode AFM operating in ultra-high vacuum (UHV) and cryogenic temperatures. The incoming laser beam is focused on the AFM tip using a high-NA off-axis parabolic mirror inside the UHV chamber. The metallic AFM tip is tapped at a frequency of ~250 kHz. A pseudo-heterodyne interferometric detection module is implemented to extract both near-field amplitude s(r,ω) and phase ϕ(r,ω) from the tip-scattered light. The images showed are the near-field amplitude s(r,ω) normalized to the gold contact next to graphene. Thermally evaporated gold serves as a good reference for the detected signal. To properly suppress background contributions to the near-field signal, we demodulate at the third harmonic of the tip tapping frequency.

Sample fabrication

The hexagonal pillar patterned dielectric superlattices (PDSLs)26 were fabricated by plasma etching the SiO2 using a thin PMMA mask. Si substrates with thermally grown SiO2 of thickness 285 nm were spin coated with a layer of 495 A2 PMMA of thickness 50 nm. The hexagonal pattern was written by e-beam lithography in a Nanobeam nB4 system at a current of 300–400 pA. SiO2 pillars were etched in an Oxford Plasmalab 80 Plus system using a mixture of CHF3 gas (40 sccm) and Ar gas (5 sccm) to a height of ~50 nm. The PMMA mask was removed through an O2 plasma etch and the PDSL cleaned by piranha chemical etching. The resulting superlattice is an array of pillars with 46 nm diameter and 58 nm height that form a hexagonal lattice with a period of 80 nm. A graphene and hexagonal boron nitride heterostructure was placed onto the PDSL by mechanical transfer. The heterostructures consisted of a top h11BN of 7 nm, a layer of graphene, and a bottom h11BN layer of 4 nm. Metal contacts and launchers were deposited using standard e-beam lithography processes. All the reported back-gate voltages are measured from charge neutrality point of the devices.

The monoisotopic h11BN single crystals were synthesized by metal flux method. High purity elemental 11B (99.41 at%) was first mixed with Ni and Cr powders in a weight ratio of 1:12:12. These materials were then loaded into an alumina crucible and heated to a molten state with a flowing mixture of N2 (95%) and hydrogen (5%) at 1550 °C. The h11BN crystals were precipitated on the flux surface by slowly cooling (1 °C/h) to 1500 °C. After the growth process, it was quickly quenched to room temperature. The crystal flakes were obtained from the solidified flux with tape47. Optical properties of the h11BN single crystals were measured using broadband Fourier-transform infrared spectroscopy method (Supplementary Fig. 6).

Data availability

The data that support the findings of this study are available from the corresponding author upon reasonable request.


  1. 1.

    Joannopoulos, J. J. D., Johnson, S., Winn, J. N. J. & Meade, R. R. D. Photonic Crystals: Molding The Flow Of Light 2nd edn. (Princeton University Press, 2008).

  2. 2.

    Barik, S. et al. A topological quantum optics interface. Science 359, 666–668 (2018).

    CAS  ADS  MathSciNet  Article  Google Scholar 

  3. 3.

    Karzig, T., Bardyn, C. E., Lindner, N. H. & Refael, G. Topological polaritons. Phys. Rev. X 5, 1–10 (2015).

    Google Scholar 

  4. 4.

    Yang, Y. et al. Realization of a three-dimensional photonic topological insulator. Nature 565, 622–626 (2019).

    CAS  ADS  Article  Google Scholar 

  5. 5.

    Lu, L. et al. Experimental observation of Weyl points. Science 349, 622–624 (2015).

    CAS  ADS  MathSciNet  Article  Google Scholar 

  6. 6.

    Wang, Z., Chong, Y., Joannopoulos, J. D. & Soljačić, M. Observation of unidirectional backscattering-immune topological electromagnetic states. Nature 461, 772–775 (2009).

    CAS  ADS  Article  Google Scholar 

  7. 7.

    Xiang, Y. et al. Observation of chiral zero mode in inhomogeneous three-dimensional Weyl metamaterials. Science 363, 148–151 (2019).

    ADS  MathSciNet  Article  Google Scholar 

  8. 8.

    Szameit, A. et al. Strain-induced pseudomagnetic field and photonic Landau levels in dielectric structures. Nat. Photon. 7, 153–158 (2012).

    Google Scholar 

  9. 9.

    Nucara, L., Greco, F. & Mattoli, V. Electrically responsive photonic crystals: a review. J. Mater. Chem. C 3, 8449 (2015).

    CAS  Article  Google Scholar 

  10. 10.

    D’souza, N. M. & Mathew, V. Tunable filter using ferroelectric-dielectric periodic multilayer. Appl. Opt. 54, 2187 (2015).

    ADS  Article  Google Scholar 

  11. 11.

    Gan, X. et al. High-contrast electrooptic modulation of a photonic crystal nanocavity by electrical gating of graphene. Nano Lett. 13, 691–696 (2013).

    CAS  ADS  Article  Google Scholar 

  12. 12.

    Ni, G. X. et al. Ultrafast optical switching of infrared plasmon polaritons in high-mobility graphene. Nat. Photon. 10, 244–247 (2016).

    CAS  ADS  Article  Google Scholar 

  13. 13.

    Yankowitz, M. et al. Tuning superconductivity in twisted bilayer graphene. Science 363, 1059–1064 (2019).

    CAS  ADS  Article  Google Scholar 

  14. 14.

    Basov, D. N., Fogler, M. M., Lanzara, A., Wang, F. & Zhang, Y. Colloquium: graphene spectroscopy. Rev. Mod. Phys. 86, 959–994 (2014).

    CAS  ADS  Article  Google Scholar 

  15. 15.

    Li, Z. Q. et al. Dirac charge dynamics in graphene by infrared spectroscopy. Nat. Phys. 4, 532–535 (2008).

    CAS  Article  Google Scholar 

  16. 16.

    Fei, Z. et al. Gate-tuning of graphene plasmons revealed by infrared nano-imaging. Nature 487, 82–85 (2012).

    CAS  ADS  Article  Google Scholar 

  17. 17.

    Chen, J. et al. Optical nano-imaging of gate-tunable graphene plasmons. Nature 487, 77–81 (2012).

    CAS  ADS  Article  Google Scholar 

  18. 18.

    Ni, G. X. et al. Fundamental limits to graphene plasmonics. Nature 557, 530–533 (2018).

    CAS  ADS  Article  Google Scholar 

  19. 19.

    Woessner, A. et al. Highly confined low-loss plasmons in graphene-boron nitride heterostructures. Nat. Mater. 14, 421–425 (2015).

    CAS  ADS  Article  Google Scholar 

  20. 20.

    Sunku, S. S. et al. Photonic crystals for nano-light in moiré graphene superlattices. Science 362, 1153–1156 (2018).

    CAS  ADS  MathSciNet  Article  Google Scholar 

  21. 21.

    Lundeberg, M. B. et al. Tuning quantum nonlocal effects in graphene plasmonics. Science 357, 187–191 (2017).

    CAS  ADS  Article  Google Scholar 

  22. 22.

    Woessner, A. et al. Electrical 2π phase control of infrared light in a 350-nm footprint using graphene plasmons. Nat. Photon. 11, 421–424 (2017).

    CAS  ADS  Article  Google Scholar 

  23. 23.

    Basov, D. N., Fogler, M. M. & García De Abajo, F. J. Polaritons in van der Waals materials. Science 354, aag1992 (2016).

    Article  Google Scholar 

  24. 24.

    Shi, Z. et al. Observation of a Luttinger-liquid plasmon in metallic single-walled carbon nanotubes. Nat. Photon. 9, 515–519 (2015).

    CAS  ADS  Article  Google Scholar 

  25. 25.

    Gerber, J. A., Berweger, S., O’Callahan, B. T. & Raschke, M. B. Phase-resolved surface plasmon interferometry of graphene. Phys. Rev. Lett. 113, 055502 (2014).

    ADS  Article  Google Scholar 

  26. 26.

    Forsythe, C. et al. Band structure engineering of 2D materials using patterned dielectric superlattices. Nat. Nanotechnol. 13, 566–571 (2018).

    CAS  ADS  Article  Google Scholar 

  27. 27.

    Jung, M., Fan, Z. & Shvets, G. Midinfrared plasmonic valleytronics in metagate-tuned graphene. Phys. Rev. Lett. 121, 086807 (2018).

    CAS  ADS  Article  Google Scholar 

  28. 28.

    Silveiro, I., Manjavacas, A., Thongrattanasiri, S. & García De Abajo, F. J. Plasmonic energy transfer in periodically doped graphene. New J. Phys. 15, 3042 (2013).

  29. 29.

    McLeod, A. S. et al. Nanotextured phase coexistence in the correlated insulator V2O3. Nat. Phys. 13, 80–86 (2017)

  30. 30.

    Shahbazyan, T. V. Local density of states for nanoplasmonics. Phys. Rev. Lett. 117, 207401 (2016).

  31. 31.

    Poddubny, A., Iorsh, I., Belov, P. & Kivshar, Y. Hyperbolic metamaterials. Nat. Photon. 7, 958–967 (2013).

    ADS  Article  Google Scholar 

  32. 32.

    Belacel, C. et al. Controlling Spontaneous Emission with Plasmonic Optical Patch Antennas. Nano Lett. (2013).

  33. 33.

    Susumu, N., Masayuki, F. & Takashi, A. Spontaneous-emission control by photonic crystals and nanocavities. Nat. Photon. 1, 449–458 (2007).

  34. 34.

    Guo, Q. et al. Efficient electrical detection of mid-infrared graphene plasmons at room temperature. Nat. Mater. 17, 986–992 (2018).

    CAS  ADS  Article  Google Scholar 

  35. 35.

    Yang, Y., Jiang, H. & Hang, Z. H. Topological valley transport in two-dimensional honeycomb photonic crystals. Sci. Rep. 8, 1–7 (2018).

    ADS  Article  Google Scholar 

  36. 36.

    Dong, J. W., Chen, X. D., Zhu, H., Wang, Y. & Zhang, X. Valley photonic crystals for control of spin and topology. Nat. Mater. 16, 298–302 (2017).

    CAS  ADS  Article  Google Scholar 

  37. 37.

    Gao, F. et al. Topologically protected refraction of robust kink states in valley photonic crystals. Nat. Phys. 14, 140–144 (2018).

    CAS  Article  Google Scholar 

  38. 38.

    Wu, X. et al. Direct observation of valley-polarized topological edge states in designer surface plasmon crystals. Nat. Commun. 8, 1304 (2017).

    ADS  Article  Google Scholar 

  39. 39.

    Qiu, P. et al. Topologically protected edge states in graphene plasmonic crystals. Opt. Express 25, 22587 (2017).

    CAS  ADS  Article  Google Scholar 

  40. 40.

    Jin, D. et al. Infrared topological plasmons in graphene. Phys. Rev. Lett. 118, 1–6 (2017).

    Article  Google Scholar 

  41. 41.

    Pan, D., Yu, R., Xu, H. & García De Abajo, F. J. Topologically protected Dirac plasmons in a graphene superlattice. Nat. Commun. 8, 1243 (2017).

    ADS  Article  Google Scholar 

  42. 42.

    Qiu, P. et al. Pseudospin dependent one-way transmission in graphene-based topological plasmonic crystals. Nanoscale Res. Lett. 13, 113 (2018).

    ADS  Article  Google Scholar 

  43. 43.

    Fan, Z. et al. Electrically defined topological interface states of graphene surface plasmons based on a gate-tunable quantum Bragg grating. Nanophotonics 8, 1417–1431 (2019).

    CAS  Article  Google Scholar 

  44. 44.

    Lee, B. et al. Electrical tuning of exciton−plasmon polariton coupling in monolayer MoS 2 integrated with plasmonic nanoantenna lattice. Nano Lett. 17, 3 (2017).

    Google Scholar 

  45. 45.

    Zhang, L., Gogna, R., Burg, W., Tutuc, E. & Deng, H. Photonic-crystal exciton-polaritons in monolayer semiconductors. Nat. Commun. 9, 713 (2018).

    ADS  Article  Google Scholar 

  46. 46.

    Bowers, J. E. et al. Recent Advances In Silicon Photonic Integrated Circuits (eds Li, G. & Zhou, X.) 9774, 977402 (International Society for Optics and Photonics, 2016).

  47. 47.

    Liu, S. et al. Single crystal growth of millimeter-sized monoisotopic hexagonal boron nitride. Chem. Mater. 30, 6222–6225 (2018).

    CAS  Article  Google Scholar 

Download references


Research at Columbia is supported as part of Programmable Quantum Materials, an Energy Frontier Research Center funded by the U.S. Department of Energy (DOE), Office of Science, Basic Energy Sciences (BES), under award DE-SC0019443. M.M.F. is supported by ONR-N000014-18-1-2722. Theoretical interpretation of the confinement of domain wall modes (E.J.M.) was supported by the DOE Office of Basic Energy Sciences under grant DE-FG02-ER45118. The hBN crystal growth was supported by the National Science Foundation, award CMMI #1538127.

Author information




L.X., A.S.M., and S.S.S. performed the nanoscale infrared measurements and characterizations. C.F., S.L., J.H.E., and C.R.D. designed and created the device structures. L.X., M.J., E.J.M., M.M.F., and G.S. provided theoretical calculations. L.X., Y.M.S., G.X.N., and A.J.S. performed far-field optical spectroscopy measurements and characterizations. D.N.B. supervised the project. L.X., C.F., M.J., and D.N.B. co-wrote the manuscript with input from all co-authors.

Corresponding author

Correspondence to D. N. Basov.

Ethics declarations

Competing interests

The authors declare no competing interests.

Additional information

Peer review information Nature Communications thanks Hui Deng, Daniel Schall and the other, anonymous, reviewer(s) for their contribution to the peer review of this work.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Xiong, L., Forsythe, C., Jung, M. et al. Photonic crystal for graphene plasmons. Nat Commun 10, 4780 (2019).

Download citation

Further reading


By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.


Quick links

Nature Briefing

Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.

Get the most important science stories of the day, free in your inbox. Sign up for Nature Briefing