Manganese-rich (Mn-rich) cathode chemistries attract persistent attention due to pressing needs to reduce the reliance on cobalt in lithium-ion batteries (LIBs)1,2. Recently, a disordered rocksalt material with reversible Mn2+/Mn4+ redox-pairs was proposed, promising extremely high capacity of >300 mAh g−1 and energy density of ~1000 Wh kg−1. Such new materials created opportunities for the next generation LIBs, but will inevitably encounter the decade-long challenge of Mn2+-dissolution in electrolytes, which has prevented the application of almost all Mn-rich materials3. Dissolution of transition-metal (TM) ions is closely associated with battery performance-degradation4,5,6,7,8,9,10,11, the accepted mechanism behind which has been overwhelmingly focused on interfacial TM-species on anode surface, resulting from dissolved TM-ions migrating from cathode and eventually depositing, in either elemental form or chelated TM-complexes, as part of the solid-electrolyte-interphase (SEI) on anode12,13,14,15,16,17. However, the role of soluble Mn2+-species in bulk electrolytes has been completely overlooked thus far. Given the continuous Mn2+-dissolution and its slow migration to the anode surface, Mn2+-species should accumulate to sufficiently high concentrations in bulk electrolyte, and it is of high interest to understand how the bivalent Mn2+ as a rival cation of Li+ competes for the solvation from both carbonate and anion. As established earlier by Xu and coworkers that Li+-solvation directly dictates interphasial chemistries in LIBs18,19, the competitive solvation between Li+ and Mn2+ should never be under-estimated.

Here in this work, using computation, spectroscopic, and electrochemical characterizations, we identify the dissolved Mn2+ as catalytic center that induce continuous electrolyte consumption at the expense of the cell performances. In comparison with Li+, the bivalent Mn2+ forms larger solvation sheath containing both PF6 and carbonate molecules, wherein Mn2+ readily activates these solvation members either for side reactions in the bulk electrolyte or for electrochemical reductions at anode surface. This destabilization becomes overwhelming at elevated temperatures, leading to significant change in both bulk electrolyte composition and interphasial chemistry. Such precise understanding of how soluble Mn-species affect battery performance constitutes critical knowledge to enable these Mn-rich cathode chemistries.


Mn2+-solvation structure in carbonate-based electrolyte

The ability of Mn2+ to compete for the solvation from carbonate solvents and anions and the resultant solvation sheath structure were calculated by density function theory (DFT) (Supplementary Fig. 1), in comparison with the interacting structures and energy of Li+. The calculated interaction energies of Mn2+ with ethylene carbonate (EC), dimethyl carbonate (DMC), ethyl methyl carbonate (EMC), diethyl carbonate (DEC), PF6, and bis(trifluoromethane sulfonyl)imide (TFSI) are −51.11, −41.49, −43.17, −43.97, −45.39, and −72.37 (with O in TFSI) kJ mol−1, respectively. Here TFSI, which does not contain chemically labile fluorine bonds and is intrinsically non-acidic, was used as a reference with the acidic anion PF6 typically used in state-of-the-art electrolytes.

The interaction energies of Mn2+ are found to be constantly higher (more negative) than those of Li+, which unambiguously indicate that the bivalent cation Mn2+ enjoys the privilege of being solvated by carbonate molecules or anions in competition with Li+ (Supplementary Fig. 1). Equally important is the preference of EC and TFSI by Mn2+ over the other investigated carbonate solvents (DMC, EMC, and DEC) and PF6 anion. A Mn2+-solvation sheath at equilibrium, therefore, should be mainly populated by EC and TFSI. Indeed, differing from Li+ (Fig. 1a), the radial distribution function obtained from molecular dynamic (MD) simulation reveals that the first solvation shell of Mn2+ is dominated by carbonyl O in EC, O in TFSI, and to a much lesser extent by F in PF6 and carbonyl O in DMC (Fig. 1b). Due to its higher charge density and roughly the same ionic radius (+2 and 80 pm for Mn2+ vs. +1 and 90 pm for Li+), Mn2+ requires higher solvation number than Li+ in order to remain soluble, hence its first solvation sheath is larger than Li+ as identified from MD simulations (Fig. 1c, d). It is worth mentioning that DFT calculations and MD simulations respectively identified N (Supplementary Fig. 1) or O (Fig. 1b, c) in TFSI as the main solvating site for Mn2+. MD simulation should be closer to reality, because with lower steric hindrance, O in TFSI is expected to be more accessible to Mn2+, which in turn generates a larger solvation sheath.

Fig. 1
figure 1

Electrolyte structures obtained from molecular dynamic simulation. Radial distribution function for Li+ (a) and Mn2+ (b) in electrolytes; The typical first solvation sheath structures of Mn2+ (c) and Li+ (d); Part of these structures that exist in liquid solutions can be detected by ESI-MS in gaseous state after partial desolvation of the cations

As TFSI is not a typical salt anion used in most commercial electrolytes and only introduced as a non-acidic anion reference to evaluate the decomposition effect of PF6, how PF6 and EC interact with Mn2+ is of primary interest. Surprisingly, the length of FP bond in PF6 increases from 1.62 to 1.77 Å (Supplementary Fig. 1) when interacting with Mn2+, as compared with 1.68 Å when interacting with Li+. Similar trend can also be obtained from MD simulations (Supplementary Fig. 2a), suggesting that Mn2+-dissolution into PF6-containing electrolyte would result in Mn2+-solvation sheaths where PF6 anion becomes rather activated as indicated by the longer P-F bond. The torn-apart PF6 subsequently generates PF5, an especially strong Lewis acid, which has been known to trigger a series of carbonate molecule decompositions20. In the reaction profile of EC (Supplementary Fig. 2b), the presence of PF5 greatly reduces the decomposition energy barrier by 39 kJ mol−1. Such catalytic effect would be exponentially accelerated at elevated temperatures.

Influence of dissolved Mn2+ on electrolyte thermostability

Experiments firmly support the above theoretical calculation regarding the unique solvation sheath structure of Mn2+ and how this structure destabilizes electrolyte components. Electrolytes containing both Li+ and Mn2+ cations with PF6 and TFSI anions were prepared and labeled Electrolytes 1 through 6 (Fig. 2a, b, and Supplementary Table 1), which were then subject to storage at 55 °C for 8 days, so that potential side reactions are accelerated in a visible manner. The color of LiPF6-free electrolytes (Fig. 2a, b, Electrolytes 1, 3, and 4) remain unchanged after such storage, indicating that neither Li+, Mn2+ nor TFSI will induce drastic decomposition. Under the same condition, the two electrolytes containing LiPF6 (Electrolytes 2 and 5) discolor slightly, identifying PF6 as the source that induces the side reactions of carbonate-based electrolyte to a moderate extent21,22, perhaps via the trace presence of PF5. In sharp contrast, significant color-change occurred when Mn2+ and PF6 coexist (Electrolyte 6), which directly confirms the destabilization of the electrolyte via the cooperation of both Mn2+ and PF6. The measured average H2O content for Electrolytes 1, 2, 3, 4, 5, and 6 before storage is 21, 24, 65, 70, 68, and 72 ppm, respectively. The TFSI-containing electrolytes (Electrolytes 4, 5, and 6) show higher moisture than the others due to the commercial TFSI-salts (both Li+ and Mn2+) which were synthesized via aqueous routes, and whose moisture level has always been an issue. However, it should be noted that the discoloration of Electrolyte 6 (containing combination LiPF6/Mn(TFSI)2) is significantly more obvious than both Electrolytes 4 and 5 (containing either Mn(TFSI)2 alone or combination of LiPF6/LiTFSI; Fig. 2b), despite their H2O contents being essentially the same within experimental error. This clear distinction decouples the discoloration of Electrolyte 6 from moisture content, and strongly suggests that the electrolyte degradation of number 6 should be ascribed to the catalytic effect of Mn2+ and its interaction with PF6 anion. To further validate this conclusion, 1000 ppm HF was injected into electrolytes and then stored at 55 °C for 8 days (Supplementary Fig. 3). The HF injection caused obvious discoloration as compared with the electrolyte without HF injection (Fig. 2b), indicating that HF indeed also causes electrolyte decomposition. However, the discoloration trend after storage (Supplementary Fig. 3) remains the same with that shown in Fig. 2b, with Electrolyte 6 being the most severe. This further confirms that the decomposition of Electrolyte 6 is firmly correlated with the co-existence of Mn2+ and PF6.

Fig. 2
figure 2

Presence of Mn2+ ions triggers thermal decomposition of electrolyte. Electrolyte discoloration before (a) and after (b) storage at 55 °C for 8 days; ESI-MS characterizations of Electrolytes 5 and 6 before (ce) and after (d, f) storage, where methanol was used as diluent solvent; DSC curves of fresh Electrolytes 2, 5, and 6 (g); charge/discharge voltage profiles of graphite/Li half-cells containing Electrolyte 6 before (upper, h) and after thermal storage (lower, h) at a current density of 74.5 mAh g−1 (0.2 C) between 0.005 to 2.5 V vs. Li/Li+

Electrospray ionization mass spectrometry (ESI-MS) was used to map the solvation sheath structures of both Li+ and Mn2+. While established earlier as a precise and quantitative tool that reveals the distribution of solvent molecules around Li+, it should be cautioned that the cation complexes as detected by ESI-MS in gaseous state actually already experienced partial desolvation during the flight under electric field, therefore, these charged species do not directly reflect the exact solvation sheaths in electrolyte solution. However, they do represent the most stable solvation species that should occur in the electrolyte solution18. It is apparent that in electrolyte containing only Li salts (Electrolyte 5), Li+ is preferentially solvated by EC molecules (Fig. 2c), as evidenced by the pronounced peaks at mass-charge ratios (m/e) of 95, 127, 183, and 358 that correspond to [Li(EC)]+, [Li(MeOH)(EC)]+, [Li(EC)2]+, and [Li(EC)4]+, respectively, despite that EC and DMC coexist at almost equimolar ratio (EC/DMC = 1.02). Methanol (MeOH) was used as diluent solvent in the ESI-MS experiments, hence solvation sheaths containing MeOH also persistently appears, showing that MeOH is a strong competitor against EC in solvating Li+. After this electrolyte underwent thermal storage, its ESI-MS still maintained a rather clean spectrum with almost identical patterns of these same solvation species (Fig. 2c, d), confirming the essential stability of electrolyte when PF6 was the only anion therein.

On the other hand, upon addition of Mn2+, a host of new species immediately appeared even before high temperature storage (Fig. 2e), as evidenced by the rather noisy background. Although it is difficult to identify all these new species, which are apparently the directly result from the electrolyte decomposition catalyzed by Mn2+ at room temperature, it is beyond doubt that extensive and chaotic reactions already occurred. Closer examination reveals that, aside from a few Li+ species (m/e 95, 127, 183), Mn2+-solvation species now exist, such as [Mn(EC)3(MeOH)]2+ (m/e 175.3), [Mn(EC)(DMC)(MeOH)4]2+ (m/e 180.5), and [Mn(EC)4]2+ (m/e 203.4). TFSI can also be observed in Mn2+-solvation as [MnTFSI (MeOH)3]+ (m/e 431) and [MnTFSI(EC)(MeOH)2]+ (m/e 487), whose presence, despite the low relative abundances, offers a firm support for the simulation result that TFSI anion is preferred by Mn2+. On the other hand, no Mn2+-solvation sheaths that contain PF6 anion can be detected in Fig. 2e, consistent with the calculation results PF6 in Mn2+-solvation sheath will be destabilized, leading to various fragments including F, PF5 or other degraded compounds. The presence of [Mn(F)(DMC)(MeOH)]+ at m/e 196 serves as a further evidence that PF6 reacts with Mn2+ even before storage.

Storage at 55 °C significantly accelerates these decompositions, whose ESI-MS (Fig. 2f) becomes dominated by Mn2+-solvation species, in sharp contrast with the spectra before the storage (Fig. 2e) where Li+-solvation species still prevailed. More importantly, it now display a much more complicated background pattern that reflects extensive decomposition, among which the prominent species include the Mn-containing species consisting of the fragments of electrolyte components such as [MnF(DMC)]+ (m/e 164), [MnF(MeOH)2] + (m/e 137.9) and [MnF(DMC)(MeOH)2]+ (m/e 196), etc. Apparently, at this moment the bulk composition of the electrolyte is no longer what represented by the face formula of [1.0 M LiPF6 + 0.3 M Mn(TFSI)2 in EC/DMC]. Instead, it contains a high Mn2+-concentration accompanied by a series of decomposition products from PF6 anion, including F and other fragments resulting from the carbonate molecules. Aside from liquid phase, analysis was also performed on the gaseous products resulting from the electrolyte decomposition catalyzed by Mn2+-species. Thus, Electrolytes 5 and 6 were stored in pouch bags and left at 55 °C for 8 days, after which ~0.8 mL of gas samples were extracted from each bag. The co-existence of Mn2+ and PF6 (Electrolyte 6) apparently induced significant decomposition reactions (Supplementary Fig. 4), as evidenced not only by the numerous peaks with varying retention time, but also by the significant quantity as reflected by peak 7. While it is impossible to accurately identify each species due to the chaotic decomposition reactions, which are further complicated by the fragmentation process in MS, we can recognize diversified F-containing species that have origin from the carbonate esters. Most importantly, the detailed analysis on the low-retention time peaks (t < 7 min) identified a dominant species at m/e = 69, which should be attributed to [PF2]+, most likely originated from PF6 or PF5 by Mn2+ then fragmented during the bombardment in MS stage.

Differential scanning calorimetry (DSC) performed on electrolytes displays a major exothermic reaction at 64 °C for Electrolyte 6, which is ca. 42 °C lower than the other two electrolytes without Mn2+ (Electrolytes 2 and 5; Fig. 2g). This process should correspond to the spontaneous decomposition reactions initialized by Mn2+ and participated by PF6 anion and carbonate solvents. Although most LIBs operate at ambient temperatures, it should be mentioned here that the core temperature of the spirally wound cells could easily surpass 40 °C, while high rate drain drives such temperature even higher to the neighborhood of these above exothermic onset23. In other words, the above electrolyte decompositions induced by Mn2+ could exist universally. Unfortunately, this potentially critical failure mechanism has been overlooked thus far when evaluating how Mn dissolution induces performance degradations of LIBs.

Acidity measurement provides a supplemental way to quantify how electrolytes decompose, as it was well known that HF-content in an electrolyte is proportionate to PF5, which is more sensitive to hydrolysis by trace moisture than does PF6 anion24,25. This is exactly what Supplementary Fig. 5 indicates, i.e., high acidity arises from Mn2+-containing electrolyte after thermal storage. As the initial H2O contents of Electrolytes 5 and 6 are essentially the same within experimental error, the higher acidity of Electrolyte 6 after storage should be mainly ascribed to the decomposition of PF6 induced by the presence of Mn2+. Meanwhile, the Mn2+-presence significantly impacted the cycling stability of the LIB, as shown in Fig. 2h (upper) and Supplementary Fig. 6, where graphite/Li half-cells were assembled using Electrolyte 6 both before and after thermal storage. The reversible lithiation/delithiation of graphite could still be supported by Electrolyte 6 before high temperature storage, despite the significant decomposition of bulk electrolyte catalyzed by Mn2+-species as represented by the event at ~1.0 V vs. Li in the 1st lithiation process. This irreversible event could be more visually outstanding when overlaid with Electrolyte 5 that contains no Mn2+ (Supplementary Fig. 7), and should correspond to the electrochemical reduction of EC molecules activated in the Mn2+-solvation sheath. Thermal storage at elevated temperature further catalyzed these decomposition reactions to a point where the bulk electrolyte composition is no longer what the face formula represents, and the graphite cannot even be lithiated/de-lithiated for a single cycle now (Fig. 2h, lower). In fact, the delithiation process of graphite in Electrolyte 6 after storage displays a rather abnormally high “capacity” at a potential that positively deviates from the normal delithiation profile of graphite anode. This parasitic process was caused by the electrochemical reactivity of the side products generated by Mn2+-catalysis during the storage. Those impurities, most of which were captured by the ESI-MS for Electrolyte 6 after storage (Fig. 2f), react with both graphite anode and Li metal counter electrode. Especially during Li-deposition (or delithiation of graphite), the nascent Li-deposition presents a far more reactive surface on Li metal, inducing severe reductions. Such “asymmetry” creates a pseudo-excessive delithiation capacity as observed in Fig. 2h. Post-mortem analysis on graphite conducted by scanning electron microscope (SEM), elemental mapping and transmission electron microscope (TEM) confirm the massive electrolyte decomposition in Electrolyte 6, which leads to significant population of O-containing species that almost completely camouflaged the presence of C and Mn on the graphite surface (Supplementary Fig. 8).

Effect of deposited Mn-species on electrolyte stability

Aside from its effect on the stability of bulk electrolyte components, Mn2+ also affects the interfacial reactions when its solvation sheath approaches the anode surface. Considering that the interaction energies of Mn2+ with both EC and PF6 are much higher (more negative) than Li+, it is logical to anticipate that Mn2+-solvation sheath alters how the Li+-solvation sheath structure dictates interphasial chemistry as established previously26. Specifically, in an electrolyte where PF6 is the only anion, the binding between the 4th EC solvent and [Mn2+(EC)3PF6] or between PF6 and [Mn2+(EC)4] is much stronger than those between EC and [Li+PF6] ion-pair or PF6 and [Li+(EC)] (Fig. 3a, b). Hence a Mn2+-solvation sheath would be much more difficult to desolvate than a Li+-solvation sheath. As consequence, the “kidnaped” anion may very likely be brought to the anode surface by Mn2+ and experience the low potential there. This would significantly raise the opportunity of anion-reduction and introduction of anion-originated species as part of the new interphase. The one-electron reduction activity of Li+ and Mn2+ solvation sheaths with and without PF6 anion were thus compared in Fig. 3c, d. The optimized structure of Mn2+ solvation sheaths before and after one electron reduction were shown in Supplementary Fig. 9, with the structures of Li+ solvation sheath already reported in our previous work26. The electron affinity energy of Mn2+-solvation sheath is found to be significantly higher (negative) than that of Li+-solvation sheath, indicating the former (Mn2+) should be the winner in the competition for electron from anode surface over the latter (Li+), in good agreement with the conclusion drawn earlier that Mn2+-presence in electrolyte accelerates the electrolyte reduction27.

Fig. 3
figure 3

Interaction energy and reduction activity of Mn2+ species. Interaction energy of EC solvent and PF6 with Li+ (a) and Mn2+ (b); Electron affinity energy of Li+ and Mn2+ solvation shells with (c) and without (d) PF6; Charge distribution of Mn2+ in solvation shells (e); Electron affinity energy of EC in various interacted structures (f)

Interestingly, for a Mn2+-solvation sheath without PF6, the gained electron prefers to associate with EC molecule instead of occupying the 3d orbital of Mn2+ (Fig. 3c), implying that EC will be preferentially reduced over Mn2+. If the Mn2+ solvation sheath contains PF6, however, the gained electron prefers to associate with PF6 (Fig. 3d), leading to a series of fluorides [PF5 and (MnF)+], which are even more reactive toward carbonate molecules than the salt anion itself. Considering that both types of Mn2+-solvation sheaths coexist as evidenced by ESI-MS data (Fig. 2e, f), the above processes should proceed simultaneously. In either case, the reductive pathway of Mn2+-species on anode surface does not generate Mn0, but instead catalyzes the reduction of the solvating members within the Mn2+-solvation sheath, be it carbonate molecules or anion. This conclusion agrees with the recent observations by Lu et al. and Jarry et al. respectively that TM cations retain their oxidation state on anode surface28,29,30, and directly rectifies the early belief that they will be reduced into elemental form on anode surface because of their higher redox potential (e.g., Mn/Mn2+ at 1.87 V vs. Li/Li+)4,27. We believe that this early misconception might have arisen because the critical role of solvation sheath was overlooked. As in the scenarios displayed by Xu and coworkers for Li+, these solvation sheaths serve as molecular-sized reaction vessels, in which the central cation activates their solvation member and directs how the reaction should proceed. Only when the solvation sheath starts to lose solvating members could the reduction of Mn2+ become possible (Fig. 3c), where the electron affinity energy of Mn2+ eventually approaches that of EC with decreasing solvation number. Hence the opportunity of Mn2+ reduction cannot be completely ruled out when anode potential is driven under certain threshold values, where strong electric field would strip Mn2+ off any solvent molecules or anions, and the low potential will force Mn2+ to reduce. This explains why metallic Mn was rarely detected on graphite surface, but occasionally evidences were still presented for their existence31,32,33. Alternative two-electron pathway was also considered, where the reduction activity and reduction structures of Mn2+ solvation sheath, in presence and absence of PF6, were shown in Supplementary Figs. 10 and 11. It can be further noted that the electron affinity energy of Mn2+ reduction is always lower (less negative) in comparison with the reductions of EC and PF6 in a solvation sheath, indicating that the possibility of Mn2+ to receive two electrons is even less likely than the scenario of one-electron reduction of Mn2+ (Fig. 3c, d). Similarly, reduction of PF6 anion remains the most thermodynamically favorable reaction.

To further examine the previous belief that TM particles in elemental form (Mn0) catalyze the reduction of carbonate molecules on electrode surface, the ability of Mn0 and Mn2+ in activating EC for reduction is compared (Fig. 3f), with the corresponding optimized structures shown in Supplementary Fig. 12. The electron affinity of EC-Mn2+ is obviously higher (more negative) than other investigated complexes, Mn0 in particular, which implies that Mn2+ is more effective in inducing electrons from the anode and then mediate it to carbonate molecules for reduction. This should be apparently attributed to the stronger electron-withdrawing capability of Mn2+ than Mn0. The electron affinity of EC-Mn0, though, is still higher than the neat EC solvent, therefore the existence of metallic Mn indeed would activate EC for reduction, but should not constitute the major contribution when Mn2+ is present.

The similar trend can be derived from the energy profiles of EC decomposition in the absences or presences of Li+, Mn0, and Mn2+ (Fig. 4), respectively, with the optimized structures shown in Supplementary Figs. 13 and 14. The existence of Mn0 significantly lowers the EC decomposition activation energy (Fig. 4a) from 247.20 (TS1) to 33.69 (TS3) kJ mol−1. Interestingly, the decomposition activation energy of EC coordinated with Mn2+ (TS7) is lower than that of neat EC (TS1) by only 16.57 kJ mol−1. On the other hand, once receiving one electron, the reduced form of EC decomposition (TS10) becomes significantly easier than EC (TS1) before reduction. In consideration of the strong catalytic effect of Mn2+ on EC reduction (Fig. 3f), the reduced form of EC may dissociate from Mn2+ and then proceed with further cascade of decomposition (TS10) without Mn2+. The decomposition activation energy of reduced EC with Mn2+ (TS21) is about 9 kJ mol−1 higher than that of reduced EC (TS10), again indicating that after being receiving one electron, EC anion would dissociate from Mn2+. The leaving EC molecule would leave a coordination vacancy near Mn2+ for other incoming EC molecules. In an overall picture of the entire catalytic process (Fig. 4c), the Mn2+-solvation sheath, no matter in bulk electrolyte or on electrode surface, acts as the catalytic center, which continuously activates the carbonate molecules for reduction, leading to incessant electrolyte consumption and cell degradation. On atomic level, one would expect that such activation of solvation sheath members by the center TM cation should be directly related to the specific d-electron configuration of the latter. This realization carries significant importance to the understanding of the electrolyte destabilization mechanisms, and should be further explored.

Fig. 4
figure 4

Influence of Mn2+ species on the decomposition mechanism of electrolyte. Decomposition reaction profiles of EC with and without interacting with Li+, metallic Mn and Mn2+ before (a) and after one electron reduction (b) from DFT calculation; Catalytic mechanism of Mn2+ on the reduction decomposition of electrolytes (c)

Finally, it should be cautioned that the Mn-content deliberately added in this work is higher than an electrolyte could experience in actual battery, hence the effect of Mn-catalysis may have been exaggerated. However, for system of extreme complexity such as the electrolyte decomposition, exaggeration more often than not brings necessary simplicity that serves as starting point to derive a model that can be further perfected. The mechanism and fundamental understanding achieved in this work therefore help shed initial light on an issue that was under-investigated because of its difficulty.


We demonstrated in this work that, besides interfacial Mn-species, the once overlooked Mn2+ in bulk electrolyte solution significantly contributes to destabilize the carbonate-based electrolytes. In comparison with Li+, the bivalent Mn2+ generates larger solvation sheath containing both PF6 and carbonate molecules, with cyclic EC preferred over acyclic DMC. Within such intimate distance confined by the solvation sheath, Mn2+ readily destabilizes both carbonate molecules and anion, either for side reactions in the bulk or for electrochemical reduction at anode surface. The destabilization of bulk electrolyte become rather pronounced at elevated temperatures, which could have significantly changed the bulk electrolyte composition. In particular, at the anode surface, Mn2+-solvation sheath activates its solvating members (carbonate molecule, anion) for reduction, rather than being reduced into Mn0. The presence of Mn2+ in bulk electrolyte or on anode surface serves as catalytic centers that induce continuous electrolyte consumption at the expense of the cell performances.


Molecular dynamic simulations

The electrolyte was modeled with the nonpolarizable force-field from refs. 34,35 for Li+, PF6, EC, DMC, and TFSI, and Bradbrook et al.36 for Mn2+. The starting configurations were prepared utilizing fftool37 and packmol38. The initial setup electrolytes were equilibrated at 393 K and 1 atm for 2 ns in NPT ensemble. The production runs were generated in NVT ensemble at 393 K and had a length of 168.4 ns for the system with Mn2+ and 20 ns for simulations without Mn2+. Nose Hoover thermostat was adopted to control the temperature39 having a coupling constant of 200 fs. The van der Waals and real space Ewald short-range interactions were calculated within a 12 Å spherical cut off. The electrostatic interactions were calculated utilizing Ewald method40 and particle mesh scheme41 for the reciprocal part. The coordination numbers around ions were calculated at the following distances (encompassing most of the first peak in rdf) ion-O = 2.4 Å, ion-P = 4.4 Å, ion-F = 2.8 Å.

The simulation cell was cubic and had 3D periodicity. The simulated systems consisted of 306 molecules of DMC and 312 molecules of EC (1:1 weight ratio), 48 ionic pairs of LiPF6 and 6 ionic pairs of Mn(TFSI)2.

Density functional theory calculations

All DFT calculations were performed with the Gaussian 09 software42. B3LYP/6-311 + + G (d) method was adopted to optimize the investigated solvents and complexes26,43. Frequency analysis was applied with the same method to verify that each obtained optimized structure was at the energy minimum point. The energy shown in this work were calculated at 298.15 K. Solvent effects were considered with the application of polarized continuum models using a dielectric constant of 20.5 (Acetone solvent). Charge distributions were analyzed by nature population analysis according to natural bond orbital (NBO) theory. 3d5 was chosen as the outmost electrons in DFT calculation for Mn2+.

Sample preparation

Battery-grade ethylene carbonate (EC), dimethyl carbonate (DMC) and lithium hexafluorophosphate (LiPF6) were provided by Guangzhou Tinci Materials Technology Co. Ltd., China. Lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) (99%) and manganese (II) bis(trifluoromethanesulfonyl)imide (Mn(TFSI)2) (>98%) were provided by Aladdin. The above electrolyte components were used without further refinement. A base solvent, EC/DMC (1/1 in weight) was formulated. 1.0 M LiPF6, 0.6 M LiTFSI, 0.3 M Mn(TFSI)2, [1.0 M LiPF6 + 0.6 M LiTFSI] and [1.0 M LiPF6 + 0.3 M Mn(TFSI)2] were applied in the base solvent to obtain electrolyte of 2, 3, 4, 5, and 6 respectively, see Supplementary Table 1. The preparation of the electrolyte is carried out in the glove box (MBraun, Germany) filled with argon, in which the O2 and H2O contents were lower than 10 and 0.1 ppm, respectively. The H2O content of electrolytes were measured by Karl-Fisher 798 GPT Titrino (Metrohm, Switzerland). The H2O content shown in this paper were the average of three parallel tests.

The injection of 1000 ppm HF, whose effect was shown in Supplementary Fig. 3, was prepared in two steps. At first 2.1 mL 20 M L−1 HF solution was injected into 40 mL Electrolyte 1 to obtain HF-containing baseline. Then 3 μL HF-containing baseline was respectively injected into 3 mL Electrolytes 1, 2, 3, 4, 5, and 6 to obtain the samples with 1000 ppm HF.

Graphite slurry was obtained by mixing artificial graphite (80 wt%, offered by Dongguan Kaijin New Energy Technology Co., Ltd, China), acetylene carbon black (10 wt%) and poly(vinylidene fluoride; 10 wt%) in N-methyl-pyrrolidone. The above slurry was then coated on Cu current collector and dried at 80 and 120 °C for 2 and 12 h in vacuum drying oven, respectively, to obtain graphite electrode. The graphite electrode was rolled before used. Lithium plate was used as counter and reference electrode in CR2025-type graphite/Li half-cells with Celgard 2400 membrane separator. Cell assembly was completed in the glove box.

Electrolyte storage

The prepared electrolytes were initially stored in polyethylene bottles sealed with an air-tight lid, which was further sealed with teflon tape and cellophane tape to ensure the good sealing (see Supplementary Fig. 15). This sealing has been adopted by some electrolyte companies when shipping solvents and electrolytes. The polyethylene bottles were transferred subsequently to the vacuum dryer for storage. After 8 days of storage at high temperature, the plastic bottles were transferred to the glove box again. And the stored electrolytes were finally transferred into glass bottles for photograph because the polyethylene bottles are opaque.

To further verify the airtightness/moisture-exclusiveness of the plastic bottles and sealing, we measured the H2O content of electrolyte 1 (solvents only, with no influence from salts) before and after 8-day storage in the vacuum dryer, which turned out to be 20 and 21 ppm, respectively, confirming that the manner that electrolytes are sealed and stored could effectively exclude the permeation of moisture from ambient.

Electrochemical measurements

The room-temperature cyclic stability of Li/graphite half-cells were tested between 0.005 and 2.5V with LAND system (CT2001A, Wuhan, China). After 3 cycles of activation at 0.1C, the Li/graphite half-cells were performed at 0.2C (1C = 372.6 mA g−1) for the subsequent cycles.

Physical characterization

The electrospray ionization mass spectrometries (ESI-MS) of electrolyte before and after storage at 55 °C were executed on TSQ Quantum Ultra. The spray voltage was +3 kv while the capillary temperature was 300 °C. The sheath gas and aux gas flow rates were 30 and 5 arb, respectively. Methanol was used as a co-solvent during the ESI-MS characterization. The date ranging from m/e = 50–1000, were available. Thermal stability of electrolytes in the temperature range of 25–300 °C was investigated using differential scanning calorimeter (DSC, PerkinElmer DSC 4000, Hetherlands) with 10 °C min−1 heating rate.

Ex-situ scanning electron microscope (SEM) and transmission electron microscope (TEM) characterization were performed on JEOL-5900 SEM and JEM-2100HR (Japan), respectively. All electrode samples were vacuum transferred to the test equipment. The acidity of electrolytes after storage were measured by precise PH test papers (PH:1.4–3.0, Q/GHSC) which were provided by Shanghai SSS Reagent CO. LTD, Shanghai China. Gaseous products of electrolyte decomposition during storage were investigated by Gas chromatography mass spectrometry (GC-MS) QP2010 Ultra Shimadzu. Approximately 10 mL Electrolytes 5 and 6 were stored in pouch bags made from the same foil materials used to assemble pouch cells (see Supplementary Fig. 16).

After 8-day storage at 55 °C, ~0.8 mL gas sample was extracted from the bags with a syringe through the pre-installed valves and then injected into a DB-5 capillary column (30 m × 0.25 mm inner diameter, 0.25 μm film thickness). Carrier gas, Helium, was used at a flow rate of 1.47 mL min−1. The inlet temperature was 150 °C, while the column temperature was initially set at 30 °C for 10 mins, then increased to 150 °C with 10 °C min−1 and maintained for another 5 mins. The mass spectrometer was operated with electron impact (EI) mode (0.1 kV) at the rate of 1250 amu s−1. Full-scan mass spectra were obtained from 20 to 100 m/e. The MS results were shown in Supplementary Fig. 4.