Abstract
The 1,2-dicarbonyl motif is vital to biomolecules, especially natural products and pharmaceuticals. Conventionally, 1,2-dicarbonyl compounds are prepared via an α-keto acyl chloride. Based on the methods used in nature, a transition-metal-free approach for the synthesis of an α-ketothioester reagent via the combination of an α-hydroxyl ketone, elemental sulfur and a benzyl halide is reported. Mechanistic studies demonstrate that the trisulfur radical anion and the α-carbon radical of the α-hydroxy ketone are involved in this transformation. The dicarbonylation of a broad range of amines and amino acids, and importantly, cross couplings with aryl borates to construct dicarbonyl-carbon bonds are realized under mild conditions by employing this stable and convenient α-ketothioester as a 1,2-dicarbonyl reagent. The dicarbonyl-containing drug indibulin and the natural product polyandrocarpamide C, which possess multiple heteroatoms and active hydrogen functional groups, can be efficiently prepared using the designed 1,2-dicarbonyl reagent.
Similar content being viewed by others
Introduction
The 1,2-dicarbonyl motif is an important life-related structure that is ubiquitous in natural products1,2,3,4,5 and modern pharmaceuticals6,7,8,9,10. Licoagrodione, isolated from a Chinese herb, was found to exhibit antimicrobial activity2. Tanshinone IIA is a transcription factor inhibitor and was isolated from Salvia miltiorrhiza BUNGE3. Mansonone C, isolated from Mansonia altissima, displays antifungal activity against P. parasitica4. Sophoradione was isolated from the roots of S. flavescens and is cytotoxic to KB tumour cells (Fig. 1a)5. Since the dicarbonyl motif can bind to proteins in the body to increase their bioavailability, many well-known dicarbonyl-containing molecules have been turned into clinically used drugs, such as the anticancer drugs indibulin7 and biricodar8, the anti-HCV drug boceprevir9, and the dermatologic agent fluocortin butyl, a synthetic corticosteroid with high topical to systemic activites (Fig. 1b)10. Furthermore, dicarbonyl-containing compounds frequently serve as valuable synthetic intermediates and precursors in organic synthesis and materials science. For example, aromatic substituted quinoxalines, which possess broad applications as photoinitiators and fluorescence-based sensors, have been synthesized from dicarbonyl-containing compounds11,12,13,14. Conventionally, dicarbonyl compounds are prepared via Müller’s α-keto acyl chloride, but the compatibility is imperfect and side reactions can occur15,16,17,18. Based on the methods used in nature, ester bonds can be formed through the transesterification of thioesters, such as acetyl coenzyme A19, and native chemical ligation via peptide chemistry20. Thioesters, as active but stable esters, have been widely used as synthetic intermediates for acyl transfer reactions such as Corey-Nicolaou macrolactonizations (Fig. 2a)21. Due to the C–S bond possessing both weaker bond energy and relative stability at ambient conditions, we assume that an α-ketothioester will be an excellent 1,2-dicarbonyl-forming reagent and be broadly applicable in chemistry (Fig. 2b). Previously, we found that α-hydroxy ketones were efficient acylating reagents, and that they easily initiated radical formation at the α position22. As a continuation of our investigations of the transformations of inorganic sulfur compounds to organic sulfur structures23,24,25,26,27,28,29,30, we hypothesize that trisulfur radical anions can react at the α position of α-hydroxy ketones (Fig. 2c). Herein, a transition-metal-free approach for the synthesis of an α-ketothioester reagent via the combination of an α-hydroxyl ketone, elemental sulfur and a benzyl halide is reported. The dicarbonylation of a broad range of amines and amino acids, and cross couplings with aryl borates to construct dicarbonyl-carbon bonds are realized by employing this stable and convenient α-ketothioester as a 1,2-dicarbonyl reagent.
Results
Optimization and Synthesis of a 1,2-Dicarbonyl-forming Reagent
We commenced our studies by investigating the transformation of readily available 2-hydroxy-1-phenylethanone to the corresponding α-ketothioester in the presence of S8 and tetrabutylammonium bromide (TBAB) in cyclopentyl methyl ether (CPME) under an inert atmosphere. Unfortunately, desired α-ketothioester 2a was not obtained when the reaction was run with only base or water (Table 1, entries 1, 2). 2a could not be provided under the conditions of organic bases, regardless of whether water was added or not in the reaction (Table 1, entries 3–6). Encouragingly, dicarbonyl-forming reagent 2a was isolated in 71% yield when both potassium carbonate and water were added (Table 1, entry 7). When potassium hydrogen carbonate (KHCO3) was used instead of potassium carbonate (K2CO3), the yield increased to 86% (Table 1, entry 8). Decreasing the amount of water to 10 equivalents resulted in a lower yield (Table 1, entry 9). Increasing the equivalents of water did not improve the reaction outcome (Table 1, entry 10). TBAB was not necessary when DMF was used as the solvent, and the yield remained acceptable (Table 1, entry 11). When the reaction was carried out under air, the isolated yield of 2a decreased to 61%, which means that oxygen affects this type of radical (Table 1, entry 12). However, the efficiency of the reaction was dramatically lower in the absence of TBAB as a phase-transfer reagent (Table 1, entry 13). The effects of different solvents implied the unique importance of cyclopentyl methyl ether (CPME) (see the Supporting Information).
Finally, S8, KHCO3 and TBAB in CPME with H2O under a N2 atmosphere were chosen as the optimal conditions. The generality of the reaction was explored on a variety of α-hydroxy ketones, as illustrated in Table 2. α-Hydroxy ketones bearing electron-donating groups could be smoothly transformed into the desired products in moderate to good yields regardless of the position of their substituent (2a–2e). Notably, when the reaction was performed on a 10-mmol (1.36 g) scale of 1a, product 2a could still be obtained in a good yield (74%), which highlights the potential of α-ketothioesters as dicarbonyl transfer reagents. To our delight, α-hydroxy ketones bearing electron-withdrawing substituents on the aromatic ring gave moderate to good yields when DMF was used as the solvent (2f–2k), in which the generation rate and stability of S3·- radical and enolate radical anion can be improved in the high polar solvent. Sensitive groups, such as ester and hydroxy groups, were also tolerated (2k and 2l). Heteroaryl α-hydroxy ketones, such as 2-furyl and 2-benzofuryl derivatives, could also be converted to the corresponding α-ketothioesters in moderate yields (2m, 2n and 2o). With regard to alkyl bromides, both primary and secondary bromides were compatible with the reaction (2p–2y) as well terminal alkenes and alkynes (2p and 2r). Benzyl bromides bearing different functional groups could be used to quench the reaction, affording the desired products in good yields (2v–2y).
The desired α-ketothioester 2a could not be furnished when α-formyl ketones 1a′ was used as the substrate, which indicated that 1a′ is not the intermediate in this transformation (Fig. 3a). Radical-trapping experiments were conducted by investigating TEMPO under the standard conditions. The coupling product 2ab was afforded in 35% yield, which provided strong evidence of α-carbon radical being involved in this transformation (Fig. 3b). The coupling product 2ab was not observed in the absence of elemental sulfur under the standard conditions, which indicate that sulfur is enssential for radical generation (Fig. 3c). A plausible reaction pathway that backed by these experimental evidences is described in Fig. 3d. The elemental sulfur interacted with the base to provide the trisulfur radical anion31,32,33. The α-hydroxy ketone can also initiate a persistent radical at the α position with the help of a base. Radical intermediate I was generated in the presence of both the trisulfur radical anion and a base. Subsequent coupling of the two different radicals in the reaction system afforded intermediate II. The dissociation of II could afford compound III and release HSS-, which combines with the alkyl halide to produce a mixture of polysulfide compounds (BnSSnBn). Intermediate III can tautomerize to sulfur anion IV, a more nucleophilic conformation, which can then undergo an SN2 substitution to eventually form desired product 2.
Dicarbonylation with the Designed Reagents
α-Ketoamides are an important fragment in drug discovery both in biological activities and synthetic transformations. A dicarbonyl fragment can be efficiently transferred to various primary or secondary α-ketoamides in good yields (including both aliphatic and aryl amines) under simple conditions (Table 3). 2-Oxo-2-phenylacetamide (3a), which possesses a free -NH2 group, is an important intermediate in organic synthesis and showed various bioactivities. When ammonia gas was bubbled into a solution of 2a, 3a was obtained in 79% yield. Notably, L-phenyglycinol was successfully applied to the dicarbonylation protocol, and the hydroxyl group was tolerated (3b). Octadecylamine, a weak nucleophile, could be converted into the corresponding α-ketoamide in moderate yield (3c). In addition, the dicarbonylation of sterically hindered tert-butyl amine was successful, affording desired product 3f in 57% yield. Anilines bearing a broad range of electron-donating and electron-withdrawing substituents at the para and ortho positions, the reactions proceeded smoothly (3k-3n). Secondary anilines were also compatible with this transformation, but in lower yield (3o). Due to the simple reaction conditions, i.e., no base, no metal and at room temperature, the dicarbonylation of a series of amino acid esters could afford the corresponding dicarbonyl compounds without erosion of the stereogenic information ( > 99% ee) in good yields (3p-3x). Notably, triglycine smoothly underwent the desired reaction to provide ethyl (2-oxo-phenylacetyl)glycylglycylglycinate (3y), which shows the great potential of this method for the late-stage modification of drug molecules.
Following the successful dicarbonylation of amines, the dicarbonylation of all-carbon aryl rings with borates for the construction of dicarbonyl-carbon bonds was studied. These reactions demonstrated the collective synthesis of dicarbonyl-containing derivatives via the current methodology (Table 4). The cross coupling of α-ketothioesters with a broad range of aryl borates was readily achieved to construct benzil derivatives. Aryl borates with substituents at different positions were all effective candidates, regardless of the electronic properties of the substituents and the presence of fused rings (5a-5i). Importantly, we demonstrated that 4-methoxyphenyl borates can be successfully coupled with various 1,2-dicarbonyl reagents, including 2-furyl and 2-benzofuryl derivatives (5j-5o). It should be noted that the alkyl borate could be compatible in this transformation as well (5p).
The dicarbonylation of alcohols and water for the construction of dicarbonyl-oxygen bonds was further studied. Benzyl alcohol was successfully applied to the dicarbonylation protocol providing the desired product 2aa in 73% yield. α-Ketothioester 2a could be hydrolysed to 2-oxo-2-arylacetic acid 2ac in the solution of sodium hydroxide. The common alcohols, such as ethanol and methanol, underwent smoothly affording the corresponding 2-oxo-2-arylacetate compounds in excellent yields (Fig. 4).
To further highlight the practical applicability of the 1,2-dicarbonyl-forming reagent, pharmaceutically relevant molecules and natural products were synthesized (Fig. 5). The anticancer drug indibulin could be prepared in a good yield from 1,2-dicarbonyl reagent 6a through the dicarbonylation of the corresponding amine. The natural product polyandrocarpamide C and a 9,10-phenanthrenequinone derivative34 were efficiently synthesized from 1,2-dicarbonyl reagents 6b and 6c, respectively, which represents a new synthetic route to these bioactive molecules.
Discussion
In conclusion, a practical protocol for the straightforward construction of α-ketothioesters via the radical coupling of α-hydroxy ketones and elemental sulfur, in which S8 was successfully introduced to a thioester, was disclosed. This method avoids the use of malodourous thiols. The application of practical α-ketothioester reagents for the dicarbonylation of amines and boroxine anhydride to afford α-ketoamide and benzil derivatives, respectively, was comprehensively achieved, and dicarbonyl motifs were successfully installed in these amino acid esters and peptides. These convenient reagents and procedures provide a potential method for the late-stage modification of drugs. Further studies on decarbonylations in drug discovery are ongoing in our laboratory.
Methods
General procedure for syntheses of 1,2-dicarbonyl-forming reagents 2
Under a N2 atmosphere, α-hydroxy ketones 1 (0.5 mmol), S8 (64.2 mg, 2 mmol), KHCO3 (100 mg, 1 mmol), TBAB (32.3 mg, 0.1 mmol), H2O (180 mg, 4 mmol) and CPME (4 mL) were added to a Schlenk tube. After stirring for 10 h at 90 oC (detect by TLC), RBr (0.75 mmol, 1.5 equiv) was added to this mixture. The resulting mixture was allowed to stir for 2 h at 90 oC. After completion of the reaction, water (5 mL) was added. The solution was extracted with ethyl acetate and organic layers were combined, dried over sodium sulfate before the organic phase was concentrated under vacuum. The residue was purified by column chromatography to give the corresponding product.
General procedure for the dicarbonylation of amines
α-Ketothioester 2 (0.2 mmol), amine (0.2 mmol) and THF (2 mL) were added to a reaction tube. After stirring for 12 h at room temperature (detect by TLC), the solvent was removed and the residue was purified by column chromatography to give the corresponding product 3.
General procedure for the dicarbonylation of aryl borates
Under a N2 atmosphere, α-ketothioester 2 (0.1 mmol), aryl borate 4 (0.1 mmol), Pd2(dba)3 (0.0025 mmol, 2.5 mol%), 4,4’-dimethoxy-2,2’-bipyridine (0.01 mmol, 10 mol%), CuTc (0.1 mmol, 1 equiv), K2CO3 (0.15 mmol), anhydrous Na2SO4 (0.15 mmol) and DMF (1 mL) were added to a Schlenk tube. After stirring for 12 h at 45 oC (detect by TLC), the mixture was cooled to room temperature and water (5 mL) was added. Then the mixture was extracted with ethyl acetate and organic layers were combined, dried over sodium sulfate before the organic phase was concentrated under vacuum. The residue was purified by column chromatography to give the corresponding product.
Data availability
The X-ray crystallographic coordinates for the structures reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition number CCDC 1895971 (2j). These data can be obtained free of charge from the Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif. The authors declare that all other data supporting the findings of this study are available within the article and Supplementary Information files and are also available from the corresponding author on reasonable request.
References
Staunton, J. Biosynthesis of Erythromycin and Rapamycin. Chem. Rev. 97, 2611–2630 (1997).
Li, W., Asada, Y. & Yoshikawa, T. Antimicrobial flavonoids from glycyrrhiza glabra hairy root cultures. Planta Med. 64, 746–747 (1998).
Jang, S.-I. et al. Tanshinone IIA from Salvia miltiorrhiza inhibits inducible nitric oxide synthase expression and production of TNF-α, IL-1β and IL-6 in activated RAW 264.7 cells. Planta Med. 69, 1057–1059 (2003).
Bettòlo, G. B. M., Casinovi, C. G. & Galeffi, C. A new class of quinones: sesquiterpenoid quinones of Mansonia Altissima. Tetrahedron Lett. 52, 4857–4864 (1965).
Shen, C.-C. et al. Phenolic Constituents of the Roots of Sophora flavescens. J. Nat. Prod. 69, 1237–1240 (2006).
Otto, H.-H. & Schirmeister, T. Cysteine proteases and their inhibitors. Chem. Rev. 97, 133–172 (1997).
Knaack, M. et al. Synthesis and characterization of the biologically active 2-[1-(4-chlorobenzyl)-1H-indol-3-yl] -2-oxo-N-pyridin-4-yl acetamide. Eur. J. Org. Chem. 2001, 3843–3847 (2001).
Armistead, M. D., Harding, W. M., Saunders, J. O. & Boger, S. J. Biologically active acylated amino acid derivatives. United States Patent. US 5723459 (1998).
Bacon, B. R. et al. Boceprevir for previously treated chronic HCV genotype 1 infection. N. Engl. J. Med. 364, 1207–1217 (2011).
Hartley, T. F. et al. Efficacy and tolerance of fluocortin butyl administered twice daily in adult patients with perennial rhinitis. J. Allergy Clin. Immunol. 75, 501–507 (1985).
Ashton, T. D., Jolliffe, K. A. & Pfeffer, F. M. Luminescent probes for the bioimaging of small anionic species in vitro and in vivo. Chem. Soc. Rev. 44, 4547–4595 (2015).
Wang, L. et al. Palladium-catalyzed oxidative cycloaddition through C-H/N-H activation: Access to benzazepines. Angew. Chem. Int. Ed. 52, 1768–1772 (2013).
Chen, C.-T. et al. Doubly ortho-linked quinoxaline/diphenylfluorene hybrids as bipolar, fluorescent chameleons for optoelectronic applications. J. Am. Chem. Soc. 128, 10992–10993 (2006).
Sessler, J. L., Cho, D.-G. & Lynch, V. Diindolylquinoxalines: effective indole-based receptors for phosphate anion. J. Am. Chem. Soc. 128, 16518–16519 (2006).
Srinivasan, N. S. & Lee, D. G. Preparation of 1,2-diketones: oxidation of alkynes by potassium permanganate in aqueous acetone. J. Org. Chem. 44, 1574–1574 (1979).
Floyd, M. B., Du, M. T., Fabio, P. F., Jacob, L. A. & Johnson, B. D. The oxidation of acetophenones to arylglyoxals with aqueous hydrobromic acid in dimethyl sulfoxide. J. Org. Chem. 50, 5022–5027 (1985).
Merkul, E., Dohe, J., Gers, C., Rominger, F. & Müller, T. J. J. Three-component synthesis of ynediones by a glyoxylation/Stephens–Castro coupling sequence. Angew. Chem. Int. Ed. 50, 2966–2969 (2011).
Boersch, C., Merkul, E. & Müller, T. J. J. Catalytic syntheses of N-heterocyclic ynones and ynediones by in situ activation of carboxylic acids with oxalyl chloride. Angew. Chem. Int. Ed. 50, 10448–10452 (2011).
Stephanopoulos, N. & Francis, M. B. Choosing an effective protein bioconjugation strategy. Nat. Chem. Biol. 7, 876–884 (2011).
Dawson, P. E., Muir, T. W., Clark-Lewis, I. & Kent, S. B. Synthesis of proteins by native chemical ligation. Science 266, 776–779 (1994).
Waldvogel, S. R. Strategic applications of named reactions in organic synthesis. Background and detailed mechanisms. By Laszlo Kürti and Barbara Czako. Angew. Chem. Int. Ed. 44, 5005–5006 (2005).
Liu, H., Dong, C., Zhang, Z., Wu, P. & Jiang, X. Transition-metal-free aerobic oxidative cleavage of C-C bonds in α-hydroxy ketones and mechanistic insight to the reaction pathway. Angew. Chem. Int. Ed. 51, 12570–12574 (2012).
Xiao, X., Xue, J. & Jiang, X. Polysulfurating reagent design for unsymmetrical polysulfide construction. Nat. Commun. 9, 2191 (2018).
Wang, M., Qiao, Z., Zhao, J. & Jiang, X. Palladium-catalyzed thiomethylation via a three-component cross-coupling strategy. Org. Lett. 20, 6193–6197 (2018).
Li, Y., Wang, M. & Jiang, X. Controllable sulfoxidation and sulfenylation with organic thiosulfate salts via dual electron- and energy-transfer photocatalysis. ACS Catal. 7, 7587–7592 (2017).
Wang, M., Chen, S. & Jiang, X. Construction of functionalized annulated sulfone via SO2/I exchange of cyclic diaryliodonium salts. Org. Lett. 19, 4916–4919 (2017).
Wang, M., Wei, J., Fan, Q. & Jiang, X. Cu(II)-catalyzed sulfide construction: both aryl groups utilization of intermolecular and intramolecular diaryliodonium salt. Chem. Commun. 53, 2918–2921 (2017).
Xiao, X., Feng, M. & Jiang, X. New design of a disulfurating reagent: facile and straightforward pathway to unsymmetrical disulfanes by copper-catalyzed oxidative cross-coupling. Angew. Chem. Int. Ed. 55, 14121–14125 (2016).
Qiao, Z. et al. Efficient access to 1, 4-benzothiazine: palladium-catalyzed double C-S bond formation using Na2S2O3 as sulfurating reagent. Org. Lett. 15, 2594–2597 (2013).
Liu, H. & Jiang, X. Transfer of sulfur: from simple to diverse. Chem. Asian J. 8, 2546–2563 (2013).
Chivers, T. Ubiquitous trisulphur radical ion S3·-. Nature 252, 32–33 (1974).
Chivers, T. & Elder, P. J. W. Ubiquitous trisulfur radical anion: fundamentals and applications in materials science, electrochemistry, analytical chemistry and geochemistry. Chem. Soc. Rev. 42, 5996–6005 (2013).
Wang, M., Fan, Q. & Jiang, X. Transition-metal-free diarylannulated sulfide and selenide construction via radical/anion-mediated sulfur-iodine and selenium-iodine exchange. Org. Lett. 18, 5756–5759 (2016).
Trosien, S. & Waldvogel, S. R. Synthesis of highly functionalized 9,10-phenanthrenequinones by oxidative coupling using MoCl5. Org. Lett. 14, 2976–2979 (2012).
Acknowledgements
The authors are grateful for the financial support provided by The National Key Research and Development Program of China (2017YFD0200500), NSFC (21722202, 21672069; 21871089 for M.W.), S&TCSM of Shanghai (Grant 18JC1415600), Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learning, and the National Program for Support of Top-notch Young Professionals.
Author information
Authors and Affiliations
Contributions
X.J. conceived the idea and supervised the whole project. M.W. and Z.D. designed and carried out the experiments. X.J. and M.W. discussed the results, contributed to the writing of the manuscript, and commented on the manuscript. All authors approved the final version of the manuscript for submission.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Journal peer review information: Nature Communications thanks Qazi Ahmed, Peng–Fei Xu and other anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Wang, M., Dai, Z. & Jiang, X. Design and application of α-ketothioesters as 1,2-dicarbonyl-forming reagents. Nat Commun 10, 2661 (2019). https://doi.org/10.1038/s41467-019-10651-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-019-10651-w
This article is cited by
-
Nitroalkanes as thioacyl equivalents to access thioamides and thiopeptides
Nature Communications (2023)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.