Abstract
Energy storage will be key to overcoming the intermittency and variability of renewable energy sources. Here, we propose a metric for the cost of energy storage and for identifying optimally sized storage systems. The levelized cost of energy storage is the minimum price per kWh that a potential investor requires in order to break even over the entire lifetime of the storage facility. We forecast the dynamics of this cost metric in the context of lithiumion batteries and demonstrate its usefulness in identifying an optimally sized battery charged by an incumbent solar PV system. Applying the model to residential solar customers in Germany, we find that behindthemeter storage is economically viable because of the large difference between retail rates and current feedin tariffs. In contrast, investment incentives for battery systems in California derive principally from a statelevel subsidy program.
Introduction
As the share of renewable energy in the overall energy mix increases, issues of intermittency and dispatchability of the electricity supply are emerging as central in the quest for a grid that is both stable and decarbonized^{1,2,3}. Cost effective energy storage is arguably the main hurdle to overcoming the generation variability of renewables. Though energy storage can be achieved in a variety of ways, battery storage has the advantage that it can be deployed in a modular and distributed fashion^{4}. This feature partly explains the recent growth in behindthemeter storage applications, for instance, when rooftop solar is combined with battery storage^{5,6,7,8,9,10,11}. Our analysis builds on recent studies that have sought to assess the economic viability of battery storage systems in conjunction with renewable power generation.
The Levelized Cost of Energy Storage (LCOES) metric examined in this paper captures the unit cost of storing energy, subject to the system not charging, or discharging, power beyond its rated capacity at any point in time. This power constraint effectively determines the average duration of the storage system, that is, the average amount of energy that can be stored per kilowatt of power capacity. For any given storage system, the significance of the LCOES metric is that it yields a minimum price that investors would require on average per kWh of electricity stored and subsequently dispatched in order to break even on their investments. In the 2019 market environment for lithiumion batteries, we estimate an LCOES of around twelve U.S. cents per kWh for a 4hour duration system, with this cost dropping to ten cents for a 6hour duration system.
Our analysis demonstrates the use of the LCOES measure in identifying the optimal size of a battery that is charged by an incumbent solar PV system. In the context of residential behindthemeter storage, the economic benefit of storage capacity is that it yields a price premium, given as the difference between the retail electricity price and the overage tariff that is obtained for surplus energy generated by the solar PV system but not selfconsumed. In contrast, the household does not derive additional revenues from reduced demand charges that frequently apply to corporate customers^{7,12}. To effectively complement an intermittent solar PV system with storage, an optimally sized battery system will be such that the price premium is equal to the LCOES evaluated at the duration corresponding to the last (marginal) power component. The actual duration of this marginal power component is determined jointly by the solar PV generation and the load consumption profile of the representative household.
We first apply this optimization framework in the context of German households where feedin tariffs for solar PV power have recently been reduced, yielding a timeinvariant price premium around 16 € cents per kWh. We find that this price premium is sufficient to incentivize the installation of a battery, as the levelized cost of storage for the optimally sized system is around 8.5 € cents per kWh, owing to a duration of ~7 h. A significant share of all existing behindthemeter storage installations in the U.S. are in California^{13}. This may seem surprising since California has reaffirmed its commitment to net metering. Taken by itself, net metering would effectively eliminate any price premium, yet the state effectively also created a price premium by imposing a nonbypassable surcharge on electricity consumed from the grid for customers with rooftop solar installations^{14,15}. We find that this surcharge in combination with the state’s rebate program, titled Self Generation Incentive Program (SGIP), and the federal Investment Tax Credit (ITC) is sufficient to incentivize substantial investments in behindthe meter battery storage. At the same time, the structure of the rebates under SGIP will result in battery systems with a relatively short duration but large power rating.
Results
The cost of energy storage
The primary economic motive for electricity storage is that power is more valuable at times when it is dispatched compared to the hours when the storage device is charged^{8,12,16,17,18}. These benefits will accrue over the entire lifetime of the storage system and must be weighed against the cost of acquiring a system capable of performing the storage service for a given number of charging/discharging events per year over the useful life of the system. A battery will be sized in the two dimensions of power and energy capacity. The size of the power component, measured in kW, governs the maximum rated electricity charge/discharge rate. The energy component determines the total capacity of electricity that can be stored. It is measured in kWh. Moreover, the ratio of energy capacity to rated power determines the duration for which the storage facility can provide the rated power. This is also the length of time needed to charge the battery given its power rating.
To capture the unit cost associated with energy storage, we introduce the Levelized Cost of Energy Storage (LCOES) which, like the commonly known Levelized Cost of Energy, is measured in monetary units (say U.S. $) per kWh. Similar to the LCOE that indicates the average revenue an investor would need in order to breakeven over the life cycle of a power generating facility^{19}, the LCOES measure captures the breakeven value for charging and discharging electricity on a per kWh basis.
Earlier studies on the cost of storage have usually fixed the duration of the storage system at some exogenous value, for instance, 4 h^{18,20}. In contrast, we first decompose the overall unit cost into the levelized cost of energy components, LCOEC (in $ per kWh), and the levelized cost of power components, LCOPC (in $ per kW). As shown in the Methods section, these levelized costs are obtained by dividing the system price of the power and energy components, respectively, by the total discounted number of charge/discharge occurrences that the battery performs the storage service in the course of its useful life. In particular, the number of charge/discharge events per year is multiplied by a factor that reflects the useful life of the battery, the cost of capital (discount rate), roundtrip efficiency losses and, finally, performance degradation over time. It is presumed that these cycling occurrences are not limited to only full capacity charging and discharging, rather, they would include partial charge/discharge events where the capacity of the battery is not fully charged or discharged.
For a storage system with a power rating of k_{p} kW and a storage capacity of k_{e} kWh, the corresponding average duration is defined as \(D \equiv \frac{{k_{\mathrm{e}}}}{{k_{\mathrm{p}}}}\) hours. The duration, D, indicates the number of hours that the system charges and discharges k_{p} kW of power per full cycle. On a lifetime basis, the cost of storing one kWh of electricity, and dispatching it at later hours of the same cycle is LCOES (D) = LCOEC + LCOPC · \(\frac{1}{D}\). Since D is stated in hours, LCOES(⋅) is expressed in $ per kWh. The following claim identifies the LCOES metric as the breakeven price per kWh for electricity storage services.
Claim: \({{\mathrm{LCOES}}\left({\frac{{k_{\mathrm{e}}}}{{k_{\mathrm{p}}}}} \right) = {\mathrm{LCOEC}} + {\mathrm{LCOPC}} \cdot \frac{{k_{\mathrm{p}}}}{{k_{\mathrm{e}}}}}\) is the breakeven price for storing and dispatching k_{e} kWh of energy in N charging/discharging events per year, subject to the maximum power charge (discharge) not exceeding k_{p} kW at any point in time.
The preceding claim is formally validated in the Methods section below. To calibrate the LCOES metric in the context of lithiumion, batteries, the following calculations are based on current U.S. market prices of $171 per kWh and $970 per kW for energy and power components, respectively, in the context of small residential applications (see Supplementary Figures 1, 2 and Supplementary Tables 1–3). In the context of lithiumion batteries, we expand the cost model in order to allow for certain costs related to installation to be entirely independent of the size of the battery, e.g., permitting, inspecting,and commissioning. In the locationspecific application of our model, these fixed costs are estimated to be $400 in the U.S. and $300 (€260) in Germany (see Supplementary Notes 1–6).
Assuming N = 365 charging/discharging events, a 10year useful life of the energy storage component, a 5% cost of capital, a 5% roundtrip efficiency loss, and a battery storage capacity degradation rate of 1% annually, the corresponding levelized cost figures are LCOEC = $0.067 per kWh and LCOPC = $0.206 per kW for 2019. The solid curve in Fig. 1 shows the corresponding LCOES for alternative duration values. In the presence of installation related fixed costs, LCOES then yields the breakeven price for covering the systems costs that do vary proportionally with either k_{e} or k_{p}; see Methods section for further details.
Consistent with the recent widespread installation of liion based batteries, the LCOES of such systems has dropped dramatically in recent years^{21,22,23}. The dotted curve shows the corresponding nominal LCOES figures back in 2013. Projecting into the future, the consensus forecast that emerges from various literature sources are annual percentage declines of 5.6% and 8.1% for the acquisition cost of the power and storage components, respectively, over the horizon 2018–2023. Assuming that this rate of improvement can indeed be maintained on average during those years, the dashed curve in Fig. 1 provides a forecast of where the LCOES of liion battery systems is expected to be in 2023 (see Supplementary Notes 2 and 4).
Our LCOES metric is a variant of existing storage cost measures^{18,20,24,25,26,27}. For energy generation, the familiar LCOE measure is frequently conceptualized as total (discounted) cash flows spent divided by total (discounted) energy delivered^{27,28}. Existing studies on the levelized cost of storage follow the same totalcostdividedbytotalenergy approach^{20,26,29,30}. While our LCOES measure is also calibrated as a breakeven measure, our metric departs from two individual levelized cost measure (power and energy) and then aggregates these two measures depending on the average duration of the system. This disaggregation will prove useful in characterizing optimally sized storage systems. In particular, the following section shows that the conditions for an optimally sized battery can be expressed succinctly in terms of the optimized duration. By optimizing the duration of the battery storage system, we obtain cost figures that are consistent with the recent widespread and increasing deployment of such storage systems. Earlier studies that arrived at substantially higher cost of storage have frequently fixed the duration at 2 or 4 h^{20,26}. It should also be noted that our LCOES concept only captures the cost per kWh of warehousing electricity on a daily basis, subject to the system’s power rating constraint. In contrast, some earlier studies also include the cost of generating the energy that is being dispatched^{26,29}.
Optimal battery size supplementing a solar PV system
We consider a representative household that has already installed a solar PV system and now faces the question whether behindthe meter storage adds additional value. To illustrate the basic economic tradeoff, we first consider a household for which both the consumption load and the solar generation profile are fairly constant across the seasons of the year. The solid curve in Fig. 2 depicts the average load profile and the bellshaped dotted curve depicts the average solar PV generation curve.
Absent any battery storage, the household will selfconsume the energy represented by the area marked I in Fig. 2, and buy the energy outside the time interval [t^{−}, t^{+}] at the going retail rate, denoted by p. The surplus energy from the solar system, i.e., the regions marked II and III, can possibly be sold back to the energy service provider at some overage tariff, OT which, in Germany, is given by the prevailing feedin tariff. If a battery system is added, the energy corresponding to the region marked as II in Fig. 2 would be discharged during times when household demand exceeds generation by the rooftop solar facility. Accordingly, region IV in Fig. 2 is equal to region II minus the roundtrip efficiency losses. The following derivation also maintains the implicit assumption that the demand represented by combined areas represented IV and V is sufficiently large to absorb the stored energy corresponding to II. Region V is residual demand that would not be met by the battery and must be met through purchases from the grid at the going retail rate p. The general case—which underlies our calculations and empirical findings—is presented in the Methods section.
A battery supplementing an existing solar rooftop system will add value only if the difference between the retail rate p and the overage tariff, OT, is sufficiently large to cover the levelized cost of the optimally sized battery. With a higher power rating, k_{p}, the amount of energy that can be stored will grow at a diminishing rate (Fig. 2). Referring to the power generation curve as G(⋅) and the household load curve as L(⋅), the area (energy) corresponding to region II in Fig. 2 becomes:
Our characterization of an optimally sized battery follows the standard microeconomic approach of an (household) investor that seeks to maximize the discounted value of future expected cash flows. As shown in Methods, the overall present value of all cash flows associated with the battery storage system (excluding any fixed costs that do not vary with the size of the battery) is proportional to the profit margin, PM, per cycle, given by:
Here, pp refers to the price premium, which is the timeaveraged difference between p and OT, adjusted for roundtrip efficiency losses and the temporal degradation of the energy discharged by the battery. Equation (2) shows that in order for a storage system to add value, the price premium, pp, must exceed the levelized cost of the energy component, LCOEC, yet this is not sufficient because of the need to cover the levelized cost of the power component, LCOPC. The marginal return to systems with a higher power rating is diminishing and therefore a storage system with positive netpresent value can be found if, and only if, the daily profit margin is positive for small values of k_{p}. The value of E^{+}(k_{p}) is approximately equal to k_{p}⋅(t^{+} − t^{−}) for small values of k_{p} (by L’Hospital’s rule). Therefore some storage system will be valuable for the representative household whenever [pp—LCOEC]⋅(t^{+} − t^{−}) − LCOPC > 0.
To identify an optimally sized battery system in this setting, we refer to \({\cal{I}}_ + (k_{\mathrm{p}})\) as the duration of the marginal power component, for a given power rating, k_{p}, of the battery. Formally, \({\cal{I}}^ + (k_{\mathrm{p}})\) is defined as the length of the time interval(s): I^{+}(k_{p}) ≡ {t∈[0,24]L(t) + k_{p} < G(t)}. For the battery storage system illustrated in Fig. 2 the duration of the marginal power component is (t^{*} − t_{*}) hours. In general, the duration of the marginal power component is the derivative of the function E^{+}(⋅) with respect to k_{p}. The firstorder optimality condition corresponding to (2) therefore is
with the optimal storage capacity determined by \(E^ + (k_{\mathrm{p}}^ \ast )\) according to Eq. (1). Thus the LCOES concept introduced above can be used to identify the size of the valuemaximizing battery system by equating the price premium and the LCOES evaluated at the duration of the marginal power component. To illustrate this criterion in the context of Fig. 2, suppose the investor is considering to add an additional kW of power capacity. That would enable the addition of at most another (t^{*} − t_{*}) kWh of storage capacity because the solar installation shown in Fig. 2 would make at most that many additional kWh of surplus energy available for charging. The incremental revenue of this addition would therefore be pp⋅(t^{*} − t_{*}) kWh, while the incremental levelized cost would be LCOPC + LCOEC ⋅(t^{*} − t_{*})⋅h. Optimality requires that the incremental cost be equal to the incremental revenue, or after dividing by (t^{*} − t_{*})⋅h, the optimality condition becomes pp = LCOES ((t^{*} − t_{*}) ⋅ h).
It should be noted that the average duration of the optimal battery storage system exceeds the duration of the marginal power component, because \(\frac{{\hat k_{\mathrm{e}}(k_{\mathrm{p}}^ \ast )}}{{k_{\mathrm{p}}^ \ast }} > {\cal{I}}^ + (k_{\mathrm{p}}^ \ast ).\) This inequality reflects that the optimal duration, \(\frac{{\hat k_{\mathrm{e}}(k_p^ \ast )}}{{k_{\mathrm{p}}^ \ast }}\), is the average of the durations of the inframarginal power components. In Fig. 2, these durations range from the lowest (t^{*} − t_{*})⋅h to the maximum value (t^{+} − t^{−})⋅h.
In Methods we present an extended version of the model that allows for both the solar generation and household electricity demand to vary across the different months of the year. Central to this extension is the variable E_{s}(k_{p}). For a given month (season), s, the energy quantity E_{s}(k_{p}) represents the maximum that can both be charged during the hours of the middle of the day with surplus solar power and discharged in the hours when the household’s load exceeds the available solar rooftop energy. The optimally sized battery will generally be oversized relative to the needs of a particular month and undersized in others. As a consequence, the battery will not be fully charged in certain months and therefore will not go through full charging/discharging events for parts of the year. Similarly, it will depend on the month whether the household is gridpositive in the sense that, on a daily basis, the household sells energy to the grid, yet does not buy power from the grid. In contrast, the battery storage system shown in Fig. 2 leaves the household a prosumer—selfproducer and gridconsumer of electricity—on account of regions III and V.
Our analysis is complementary to other studies that have explored residential solar PV coupled with storage. Some studies have sought to calculate the levelized cost of storage with solar PV, though with energy and power components the size of which is exogenously fixed rather than determined through an explicit optimization ^{20,31}. Some studies have determined optimal power and energy dimensions for storage systems of various technologies, though only in the context of a 1year simulation^{10}. Other studies rely on sensitivity analysis to find optimal solar PV plus storage newbuild combined systems without explicit consideration of the dimension of the power component or the corresponding lifecycle cost metric^{5,16}. Finally, some earlier studies have also focused on sizing a storage system when revenues are obtained through price arbitrage^{27}, though in contrast to our approach, these studies do not yield estimates for the optimized levelized cost of energy storage.
Locationspecific applications
Incentives for distributed energy generation in Germany have long been provided by feedin tariffs. For recent solar installations these tariffs have recently been reduced to ≈12 € cents per kWh^{32}. The current retail rates of near 30 € cents therefore create a substantial price premium. In contrast to other jurisdictions around the world, Germany provides only modest direct incentives for battery storage installations^{33}.
Table 1 shows the results of our model for a representative household in Munich. The calculations are based on a model with 12 representative days, one for each month of the year (see Supplementary Table 4 and Supplementary Note 7). For a k_{s} = 6 kW_{p} residential solar installation, we obtain an optimal battery size of \(k_{\mathrm{p}}^ \ast = 0.73\,{\mathrm{kW}}\) and \(k_{\mathrm{e}}^ \ast = 5.1\,{\mathrm{kWh}}\), yielding an average duration of about 7 h. The corresponding levelized cost of storage is LCOES = 8.5 € cents per kWh and, separately, the fixed cost is given as €260.
To calibrate our findings, we note that the ratio of k_{s} to \(k_{\mathrm{e}}^ \ast\) aligns with residential battery system sizes observed in Germany^{34}. While our calculations identify the battery capacity yielding the highest netpresent value from a pure arbitrage perspective, the household could essentially double the size of the battery and still breakeven on the investment. Specifically, the netpresent value would still be nonnegative if k_{p} = 1.6 kW and k_{e} = 8 kWh. That energy capacity is, in fact, close to the observed average capacity installation in Germany for 2017^{34}. Depending on the specific application of the battery system and the frequency of short duration highpower loads, it may be advantageous to opt for a higher power capacity and additional grid purchases.
The optimally sized battery will be fully charged on representative days during five months of the year. Thus \(k_{\mathrm{e}}^ \ast = 5.1 \le E_s(k_{\mathrm{p}})\). In the remaining 7 months there is either insufficient supply of solar power (November–February) or there is insufficient demand in the after sunset hours (June–August). The household will be gridpositive during average days in June, July, and August in the sense that the energy stored in the battery is sufficient to meet the household’s electricity load. Formally, \({\mathrm{min}}\{ k_{\mathrm{e}}^ \ast ,E_s(k_{\mathrm{p}})\} = A_s\) during those months.
Under current rules, solar PV systems in Germany exhaust their feedin tariff support after 20 years. At that point in time, the household would probably not receive more than the average wholesale rate (around 3 € cents per kWh) for any surplus energy sold back to the energy service provider. For such older solar PV systems, the financial return from adding a battery system would at that point increase further because the price premium would then effectively be at least 27 € cents per kWh. Under this scenario, it would be economical to install a larger power rating (over 4 kW) and coupled larger energy capacity (between 8 €kWh and 11 kWh).
In contrast to Germany, California may at first glance not appear ideally suited for behindthemeter storage installations. The state’s continued commitment to the policy of net metering effectively allows both residential and commercial customers to sell any temporal surplus electricity back to their energy service providers at the same rate at which the customer acquires electricity from the grid. From the perspective of the customer, this policy effectively enables free energy storage. In the context of the above model, the price premium for storage systems in California would therefore be zero. It should be noted, though, that in confirming the state’s commitment to net metering, California utilities were nonetheless allowed to impose a nonbypassable charge for all electricity consumed by customers with residential solar PV installations. The average nonbypassable charge rate is 2.7¢ per kWh. This surcharge thus becomes an effective price premium because any energy fed back to the grid from the solar facility will only be credited at the basic electricity retail rate.
For new storage installations in California, investors are eligible for both federal and statelevel support programs. At the federal level, battery installations in the U.S. qualify for an Investment Tax Credit, ITC, provided the battery can be classified as solar equipment^{35}. Specifically, this requires that the energy storage capability of the battery does not exceed the total energy generated by the solar PV system. As detailed further in Methods, the battery would otherwise only be eligible for a share of the maximum ITC, which amounts to 30% of the acquisition cost.
In addition to the federal support for battery storage systems installed in conjunction with solar PV systems, California has adopted the socalled SelfGeneration Incentive Program (SGIP) for behindthemeter storage systems (see Supplementary Note 8). This program ultimately explains why the majority of residential battery storage systems installed to date in the U.S. are in fact located in California. In its current form, SGIP offers a rebate on the expenditure for energy storage components. Thus it is stated in $ per kWh and effectively reduces the acquisition cost of energy storage components, that is, the parameter v_{e}.
The specific amount to be rebated depends on the duration of the storage system. Normalizing k_{p} at 1 kW, the investor is entitled to a rebate of $400 for the first two kWh of energy storage, an additional rebate of $250 for the next two kWh, and a final rebate of $100 for the next two kWh, up to a duration of 6 h. Additional energy storage components corresponding to the initial 1 kW power rating do not receive any subsidy. For a power component of k_{p} kW, the rebate amounts to $400 for each kWh of energy storage provided the duration of the system does not exceed 2 h^{36}. For systems with longer durations, the rebate per kWh steps down as indicated above, such that no additional support is given to systems with a duration exceeding 6 h. These rebates are available in addition to the federal 30% investment tax credit (ITC) for batteries that qualify as solar equipment.
Table 2 shows the results of our model applied to Los Angeles (see Supplementary Table 5 and Supplementary Note 9). Given a 4.85 kW_{p} residential solar installation, we obtain an optimal battery size of \(k_{\mathrm{p}}^ \ast = 2.45\,{\mathrm{kW}}\) and \(k_{\mathrm{e}}^ \ast = 9.8\,{\mathrm{kWh}}\). The optimal duration is D^{*} = 4 h with a corresponding LCOES of 0.6¢ per kWh and, separately, the fixed cost is given as $400.
In contrast to our findings for Germany, the optimally sized battery in California would be charged to capacity effectively every month other than December and January (there is only a small amount of slack of 0.02 kWh in July). At the same time, the representative household will be gridpositive only in the month of June, as in every other month the household will have to continue purchasing power after acquisition of the optimally sized battery. Since the effective price premium is 2.7¢ per kWh, such a system creates value for the investing party under current conditions. Absent any federal or statelevel incentives, the LCOES would be 12.8¢ per kWh. The ITC covers 3.8¢(≈0.3 · 12.8¢), while SGIP contributes the remaining 8.4¢.
The fact that the optimal duration in California is exactly 4 h is not a coincidence. It rather reflects that under SGIP the incremental rebate for systems with a duration exceeding 4 h drops from $200 to $100 per kWh. In conjunction with the federal ITC, the California rebate is sufficiently large so as to incentivize a duration between 4 and 6 h, even in the absence of any price premium. The only reason a California household would not install an arbitrarily large storage system is that the full federal tax credit would no longer be available once the energy storage capability exceeds 12.2 kWh, which is the annual average daily production from the solar installation.
We note that an implication of the model is that SGIP could result in economic storage systems (i.e., PM(k_{p}) ≥ 0) with an oversized power rating, relative to what is needed to store the peak production surplus from solar generation. The largest system that would be economical to install has the dimensions of k_{p} = 2.9 kW and k_{e} = 11.6 kWh. In order to maintain a relatively short duration and thereby qualify for a correspondingly high rebate under SGIP, the household will acquire a power component that is 20% larger than optimal. To witness, the duration of the optimally sized battery in California is about half of that in Germany. This conclusion needs to be qualified by the observation that our analysis has employed average hourly load data that do not reflect shortterm spikes in power consumption. If such spikes occur with sufficient frequency (e.g., electric vehicle charging, simultaneous clothes drying, and air conditioning operation), the household could be left with a tradeoff between greater autonomy resulting from a more powerful battery and additional electricity purchases from the grid.
Discussion
In order to achieve the renewable energy goals articulated by many jurisdictions around the world, energy storage will need to provide a sizable buffer against the variability and intermittency that is inherent to power generation from wind and solar energy. A frequently articulated concern about energy storage is the common perception of high cost. This paper argues that the cost of storage is driven in large part by the duration of the storage system. Duration, which refers to the average amount of energy that can be (dis)charged for each kW of power capacity, will be chosen optimally depending on the underlying generation profile and the price premium for stored energy. The economies of scale inherent in systems with longer durations apply to any energy storage system. In comparison to battery storage, we would expect these scale economies to be more pronounced for hydrogen storage. There the levelized cost of the electrolyzer that converts electricity and water into hydrogen and oxygen is arguably larger than the levelized cost of the power component of a battery system^{37}. In contrast the LCOEC for hydrogen storage is likely to be smaller than that of liion cells if the hydrogen is stored in tanks or underground caverns^{37}.
For lithiumion batteries, we find that, depending on the duration, an effective upper bound on the current unit cost of storage would be about 27¢ per kWh under current U.S. market conditions. Such a high cost would be obtained for a system with a duration of 1 h, that is, 1 kWh of energy that can be charged, or discharged, in 1 h (k_{p} = 1). In that case, the levelized cost of storage in the current U.S. market would amount to LCOES = LCOPC + LCOEC = 20.6 + 6.7¢ per kWh. At the same time, our analysis shows that a household in the German setting that seeks to optimize the size of its behindthemeter storage facility, so as to complement a rooftop solar installation, would find it optimal to adopt a 7 h duration system. Not only will that would reduce the LCOES to 8.5 € cents per kWh, such a larger duration system would experience relatively few full cycling events, prolonging operational life^{38,39}. Furthermore, within the Germany case, if the recent trend in the system prices for lithiumion batteries continues, we project this levelized cost of storage figure to decrease to about 6.5 € cents per kWh within another four years.
For an incumbent solar installation, the levelized cost of energy storage concept is useful in order to identify an optimally sized behindthemeter battery system. The key observation for storage in conjunction with a solar PV system is that for each additional kW of power capacity, the additional number of hours that the system can absorb energy is diminishing. This leads to the simple optimality condition that the available price premium will be equal to the LCOES evaluated at the duration corresponding to the last power component. This model framework yields new predictions for the storage systems that residential solar customers in both Germany and California would want to adopt. In both jurisdictions, investments in battery storage are now emerging as financially advantageous provided the storage system is sized and configured optimally. Yet, the economic fundamentals differ substantially due to the different regulatory regimes in place.
The incentives to invest in battery storage in Germany are principally driven by the sizable difference between retail rates and feedin tariffs. The resulting price premium for energy that is self generated and stored of about 16 € cents per kWh generates a tangible profit margin in comparison to the optimized LCOES value of about 8.5 € cents per kWh. The prospect of further reductions in battery acquisition costs in the future as well as the policy trend towards lower feedin tariffs for residential solar PV power is likely to strengthen the incentives for installing behindthe meter storage devices in the future.
Our explanation for the recent growth in residential storage capacity in California is based primarily on the combination of the state’s rebate program in conjunction with the federal investment tax credit that is available for storage devices that qualify as solar equipment. In contrast to Germany, the price premium is modest under California’s netmetering policy. As the acquisition cost of storage modules continues to decline, the state of California is likely to adjust the current rebate program. Our analysis suggests that a more cost effective approach for the rebate program would lessen the incentive for storage systems with a relatively short duration, such as the 4 h that emerge as most profitable for the household in our calculations.
There are several promising avenues for extending the analysis in this paper. First, while the analysis in this paper has viewed the adoption of the solar PV system as exogenous and given, many commercial and residential investors will in the future view distributed generation and storage as a simultaneous investment decision. Depending on the overage tariff that is available for energy that is fed to the grid, the availability of cost effective behindthemeter storage will provide incentives for a larger PV system, which, in turn, is likely to increase the size of the optimally sized battery system^{11,12,40}. Secondly, our framework is also readily extended to commercial rather than residential electricity customers. An additional financial motive to invest in battery storage for commercial customers is the avoidance of demand charges and peak pricing charges under timeofuse pricing. In the U.S., these features are becoming increasingly important in the tariff structures for many commercial customers. Such tariff structures provide additional incentives for behindthemeter storage installations.
Methods
LCOES as the breakeven value
We first demonstrate that \(\mathrm{LCOES} \left( {\frac{{k_{\mathrm{e}}}}{{k_{\mathrm{p}}}}} \right) = {\mathrm{LCOEC}} + {\mathrm{LCOPC}}\cdot\frac{{k_{\mathrm{p}}}}{{k_{\mathrm{e}}}}\) is the breakeven value per kWh for investing in an energy storage system. At first, we suppose that all system cost scale linearly with the size of the battery storage system. Specifically, suppose a household or an external service provider invests in a system that is capable of storing and dispatching k_{e} kWh of energy per cycle, subject to the maximum power charge (or discharge) not exceeding k_{p} kW at any point in time. Suppose further that there are N cycles per year and the unit revenue for storage is $p^{o} per kWh. We follow the standard approach in economics that posits that the investing party (household) will seek to optimize the discounted value of future cash flows (NPV) resulting from investment in a storage system:
with the input variables shown in the following table Table 3.
Finally, \({\mathrm{Rev}}_i^N(k_{\mathrm{p}},k_{\mathrm{e}})\) denotes the revenue that can be obtained from the storage service for each cycle in year i:
with p^{o} denoting the unit revenue (possibly the price premium) per kWh stored. The discounted value of cash flows obtained from such a battery storage investment can be rewritten as Γ ⋅ PM(k_{p}, k_{e}) where Γ denotes a proportionality factor given by \(\Gamma \equiv N \cdot \eta \cdot \mathop {\sum}\nolimits_{i = 1}^T {x_i \cdot \gamma ^i}\), and PM denotes the profit margin per charging/discharging event:
Here, LCOEC and LCOPC are the levelized costs of the energy and power components of the storage system, respectively:
\({\mathrm{LCOPC}} = \frac{{v_{\mathrm{p}}}}{\Gamma }\quad \quad \quad \quad {\mathrm{LCOEC}} = \frac{{v_{\mathrm{e}}}}{\Gamma }.\)
In order for the unit revenue, p^{o}, to be a breakeven price, the profit margin per charging/discharging event must be zero, or \(p^{\mathrm{o}} = {\mathrm{LCOES}}\left( {\frac{{k_{\mathrm{e}}}}{{k_{\mathrm{p}}}}} \right)\). Thus the LCOES at the duration \(D = \frac{{k_{\mathrm{e}}}}{{k_{\mathrm{p}}}}\) is the breakeven price per kWh. If there are fixed costs, FC, that are unrelated to the size of the battery, e.g., installation related costs such as permitting and inspection, then:
and the breakeven value for a zero netpresent value becomes
Optimal battery size with one representative day
In connection with a residential solar PV system and a constant unit revenue for electricity stored, there is, for any given k_{p} and k_{e} no loss of generality in assuming that the system goes through daily charging and discharging events (N = 365), even though the battery may not be fully charged. This will generally be the case when there are significant seasonal variations in the household’s load and generation profiles. Absent any seasonal variations, an efficient battery system will size the power rating so as to absorb k_{e} kWh of energy with minimal power. The relation between k_{e} and k_{p} is therefore determined by the household’s electricity load L(⋅) and the generation profile of the solar PV system, G(⋅), as illustrated in Fig. 2. Formally, we again have
and
An optimally sized battery system maximizes the profit margin per cycle PM (k_{p}, k_{e}), with p^{o} given by the levelized price premium:
Here, p denotes the retail price of electricity and OT denotes the applicable overage tariff that the customer can obtain for surplus energy fed to the grid. These gains must be adjusted for roundtrip energy losses. Thus, an optimal storage system maximizes the daily profit margins (averaged across the years):
where E(k_{p}) = min{E^{+}(k_{p}), E^{−}(k_{p})}. Thus E_{s}(k_{p}) represents the maximum that can both be charged during the hours of the day with surplus solar power and discharged during the hours when the household’s load exceeds the available solar rooftop energy.We note that E(k_{p}) is concave because the minimum of the two concave functions E^{+}(k_{p}) and E^{−}(k_{p}) is concave. The derivative of E(k_{p}) is given by \({\cal{I}}^ + (k_{\mathrm{p}})\) if E^{+}(k_{p}) < E^{−}(k_{p}), while this derivative is given by \({\cal{I}}^  (k_{\mathrm{p}}^ \ast )\), defined as the length of the time intervals I^{−}(k_{p}) ≡ {t∈[0, 24]L(t) − k_{p} > G(t)}, if E ^{+}(k_{p}) > E^{−}(k_{p}). To characterize the power rating of the optimally sized battery system, there are three possible candidates. First if the power capacity \(k_{\mathrm{p}}^1\) given by:
is such that \(E^ + (k_{\mathrm{p}}^1) \le E^  (k_{\mathrm{p}}^1)\), then \(k_{\mathrm{p}}^1\) is the optimal power rating. Secondly, if the \(k_{\mathrm{p}}^2\) given by:
is such that \(E^  (k_{\mathrm{p}}^2) \le E^ + (k_{\mathrm{p}}^2)\), then \(k_{\mathrm{p}}^2\) is the optimal power rating. If neither of these scenarios apply, there is a unique value \(k_{\mathrm{p}}^3\) between \(k_{\mathrm{p}}^1\) and \(k_{\mathrm{p}}^2\) such that \(E^ + (k_{\mathrm{p}}^3) = E^  (k_{\mathrm{p}}^3)\). This \(k_{\mathrm{p}}^3\) must be the optimal value because, if the first two scenarios do not apply, the function PM (k_{p}) = (pp − LCOEC) · min{E^{+}(k_{p}), E^{−}(k_{p})} − LCOPC · k_{p} must be increasing up to \(k_{\mathrm{p}}^3\) and decreasing thereafter.
Optimal battery size with seasonal variations
To incorporate the effect of seasonal variations in both solar PV generation and household consumption, we divide the year into n different seasons, with one representative day for each season. Let Δ_{s} represent the share of days out the total 365 days of the year. Thus the Δ_{s} sum up to one. The functions E^{+}(k_{p}) and E^{−}(k_{p}) in Eqs (9) and (10) are then indexed by 1 ≤ s ≤ n, i.e., \(E_s^ + (k_{\mathrm{p}})\) and \(E_s^  (k_{\mathrm{p}})\) Correspondingly, let \(E_s(k_{\mathrm{p}}) = {\mathrm{min}}\{ E_s^ + (k_{\mathrm{p}}),E_s^  (k_{\mathrm{p}})\}\). Taking seasonal variations into account, the daily profit margin can be stated as:
This objective function reflects that in each season the maximum energy that can be stored is the lower of two values: the energy capacity of the battery and the energy that can effectively be charged and discharged in one day during that particular season, given the power rating, k_{p}. If there is only one season, then k_{e} = E(k_{p}). With seasonal variations, the optimal energy capacity will need to balance the value that storage creates in different seasons.
The optimal energy capacity for any given power rating k_{p} maximizes the objective function in (15) with regard to k_{e}. To that end, we denote by (m(1), ...., m(n)) a permutation of the integers (1, ..., n) such that E_{m(1)}(k_{p}) ≤ ..., ≤ E_{m(n)}(k_{p}). According to the objective function in (15), adding another energy unit to the battery makes sense only to the extent that this additional kWh can be put to use in sufficiently many seasons so that the corresponding revenues collectively outweigh the incremental cost of LCOEC. Formally, for any given k_{p}, the optimal energy capacity \(k_{\mathrm{e}}^ \ast (k_{\mathrm{p}})\) is given by E_{m(u)}(k_{p}), where 1 ≤ u ≤ n is determined as the unique integer satisfying the inequalities:
The final step now identifies the optimal power capacity, \(k_{\mathrm{p}}^ \ast\) as the maximizer of:
Federal policy support mechanisms
Germany only provides modest incentives for battery storage installations^{33}. Yet, as shown above, our calculations indicate that the large difference between retail rates and feedin tariffs makes subsidies are no longer necessary for further deployment of behindthemeter residential storage.
Battery installations in the U.S. qualify for an Investment Tax Credit, ITC, provided the battery can be classified as solar equipment. Formally, the federal tax credit can be represented as:
where \(\bar G\) denotes the total energy generated on an average day by the solar PV system, that is,
and
provided \(\frac{{\bar G}}{{k_{\mathrm{e}}}} \ge .75\), while \(A(k_{\mathrm{e}}\bar G) = 0\) otherwise. Thus, the partial tax credit under the ITC drops to zero if more than 25% of the battery’s energy storage capacity would be available after absorbing the entire energy generated by the incumbent solar PV system. On a levelized basis, the ITC then modifies the daily profit margin so that:
Provided the battery storage system is not oversized relative to the incumbent solar PV system, the ITC will simply scale both LCOPC and LCOEC by the factor .7 (i.e., .7 = 1−.3).
California’s SGIP
California’s SelfGeneration Incentive Program (SGIP) offers investors a rebate for battery storage systems. The amount to be rebated depends on the duration of the storage system. For a (k_{p}, k_{e}) battery system, the daily profit margin in California, denoted by PM^{c}, then becomes:
Here, LS^{c}(k_{p}, k_{e}) denotes the levelized subsidies available in California for a (k_{p}, k_{e}) battery storage system that qualifies as solar equipment under the ITC rules.
with:
Data availability
The source data underlying Fig. 1, Tables 1 and 2, and Supplementary Figs. 1 and 2 are provided as a Source Data file.
Code availability
Computational code is available upon request to the corresponding author.
References
 1.
Braff, W. A., Mueller, J. M. & Trancik, J. E. Value of storage technologies for wind and solar energy. Nat. Clim. Change 6, 964–969 (2016).
 2.
Hernandez, R. R., Hoffacker, M. K. & Field, C. B. Efficient use of land to meet sustainable energy needs. Nat. Clim. Change 5, 353–358 (2015).
 3.
Chu, S., Cui, Y. & Liu, N. The path towards sustainable energy. Nat. Mater. 16, 16–22 (2017).
 4.
Bumpus, A. G. & Comello, S. D. Emerging clean energy technology investment trends. Nat. Clim. Change 7, 382–385 (2017).
 5.
Hoppmann, J., Volland, J., Schmidt, T. S. & Hoffmann, V. H. The economic viability of battery storage for residential solar photovoltaic systems—a review and a simulation model. Renew. Sustain. Energy Rev. 39, 1101–1118 (2014).
 6.
Behrangrad, M. A review of demand side management business models in the electricity market. Renew. Sustain. Energy Rev. 47, 270–283 (2015).
 7.
Wu, D., KintnerMeyer, M., Yang, T. & Balducci, P. Economic analysis and optimal sizing for behindthemeter battery storage. In 2016 IEEE Power and Energy Society General Meeting: Boston, Massachusetts, United States of America (PESGM) 1–5 (2016).
 8.
Merei, G., Moshövel, J., Magnor, D. & Sauer, D. U. Optimization of selfconsumption and technoeconomic analysis of pvbattery systems in commercial applications. Appl. Energy 168, 171–178 (2016).
 9.
Burger, S. P. & Luke, M. Business models for distributed energy resources: a review and empirical analysis. Energy Policy 109, 230–248 (2017).
 10.
Hesse, H. C. et al. Economic optimization of component sizing for residential battery storage systems. Energies http://www.mdpi.com/19961073/10/7/835 (2017).
 11.
O’Shaughnessy, E., Cutler, D., Ardani, K. & Margolis, R. Solar plus: optimization of distributed solar pv through battery storage and dispatchable load in residential buildings. Appl. Energy 213, 11–21 (2018).
 12.
Stephan, A., Battke, B., Beuse, M., Clausdeinken, J. H. & Schmidt, T. S. Limiting the public cost of stationary battery deployment by combining applications. Nat. Energy 1, 160–179 (2016).
 13.
GTM Research. U.S. energy storage monitor: Q2 2018 full report. Tech. Rep., Greentech Media (GTM) Research (Boston, Massachusetts, United States of America, 2018).
 14.
CPUC. Decision adopting successor to net energy metering tariff. http://docs.cpuc.ca.gov/PublishedDocs/Published/G000/M158/K181/158181678.pdf (2016). California Public Utilities Commission Ruling R.1407002.
 15.
Ossenbrink, J., Finnsson, S., Bening, C. R. & Hoffmann, V. H. Delineating policy mixes: Contrasting topdown and bottomup approaches to the case of energystorage policy in california. Res. Policy. http://www.sciencedirect.com/science/article/pii/S0048733318300957 (2018).
 16.
Weniger, J., Tjaden, T. & Quaschning, V. Sizing of residential pv battery systems. Energy Procedia 46, 78–87, http://www.sciencedirect.com/science/article/pii/S1876610214001763 (2014).
 17.
DufoLópez, R. & BernalAgustín, J. L. Technoeconomic analysis of gridconnected battery storage. Energy Convers. Manag. 91, 394–404 (2015).
 18.
Belderbos, A., Delarue, E., Kessels, K. & D’haeseleer, W. Levelized cost of storage – introducing novel metrics. Energy Econ. 67, 287–299 (2017).
 19.
Comello, S. & Reichelstein, S. Cost competitiveness of residential solar pv: the impact of net metering restrictions. Renew. Sustain. Energy Rev. 75, 46–57 (2017).
 20.
Lazard. Lazard’s levelized cost of storage analysis. Version 4.0. Tech. Rep. (Lazard Ltd., 2018).
 21.
Curry, C. Lithiumion battery costs and market: squeezed margins seek technology improvements & new business models. Tech. Rep. (Bloomberg New Energy Finance, 2017).
 22.
Schmidt, O., Hawkes, A., Gambhir, A. & Staffell, I. The future cost of electrical energy storage based on experience rates. Nat. Energy https://www.nature.com/articles/nenergy2017110 (2017).
 23.
Kittner, N., Lill, F. & Kammen, D. Energy storage deployment and innovation for the clean energy transition. Nat. Energy https://doi.org/10.1038/nenergy.2017.125 (2017).
 24.
Pawel, I. The cost of storage—how to calculate the levelized cost of stored energy (lcoe) and applications to renewable energy generation. Energy Procedia 46, 68–77, http://www.sciencedirect.com/science/article/pii/S1876610214001751 (2014).
 25.
Julch, V. Comparison of electricity storage options using levelized cost of storage (lcos) method. Appl. Energy 183, 1594–1606 (2016).
 26.
Lazard. Lazard’s levelized cost of storage analysis. Version 3.0. Tech. Rep. (Lazard Ltd. 2017).
 27.
Lai, C. S. & McCulloch, M. D. Levelized cost of electricity for solar photovoltaic and electrical energy storage. Appl. Energy 190, 191–203 (2017).
 28.
Obi, M., Jensen, S., Ferris, J. & Bass, R. Calculation of levelized costs of electricity for various electrical energy storage systems. Renew. Sustain. Energy Rev. 67, 908–920 (2017).
 29.
World Energy Resources. Estorage: shifting from cost to value for wind and solar applications (London, United Kingdom, 2016).
 30.
Mundada, A. S., Shah, K. K. & Pearce, J. Levelized cost of electricity for solar photovoltaic, battery and cogen hybrid systems. Renew. Sustain. Energy Rev. 57, 692–703 (2016).
 31.
Tervo, E. et al. An economic analysis of residential photovoltaic systems with lithium ion battery storage in the United States. Renew. Sustain. Energy Rev. 94, 1057–1066 (2018).
 32.
BMWi. Eeg 2017 feedin tariff.://www.reslegal.eu/searchbycountry/germany/single/s/rese/t/promotion/aid/feedintariffeegfeedintariff/lastp/135/ (2017).
 33.
KfW. KfWProgramm Erneuerbare Energien “Speicher” (2015).
 34.
Figgener, J. et al. Wissenschaftliches messund evaluierungsprogramm solarstromspeicher 2.0. jahresbericht 2018. Tech. Rep. (Institut fur Stromrichtertechnik und Elektrische Antriebe RWTH Aachen and Speicher Monitoring, 2018).
 35.
Denholm, P., Eichman, J. &Margolis, R. Evaluating the technical and economic performance of pv plus storage power plants. Tech. Rep. NREL/TP6A2068737. (National Renewable Energy Laboratory, 2017).
 36.
CPUC. 2017 selfgeneration incentive program handbook v3. Tech. Rep. (California Public Utilities Commission, 2017).
 37.
Glenk, G. & Reichelstein, S. Economics of converting renewable power to hydrogen. Nat. Energy. https://doi.org/10.1038/s4156001903261 (2019).
 38.
Dietrich, A. & Weber, C. What drives profitability of gridconnected residential pv storage systems? a closer look with focus on germany. Energy Econ. 74, 399–416 (2018).
 39.
Xu, B., Oudalov, A., Ulbig, A., Andersson, G. & Kirschen, D. S. Modeling of lithiumion battery degradation for cell life assessment. IEEE Trans. Smart Grid 9, 1131–1140 (2018).
 40.
Neubauer, J. & Simpson, M. Deployment of behindthemeter energy storage for demand charge reduction. Natl Renew. Energy Lab. Tech. Rep. NREL/TP540063162 (2015).
Acknowledgements
The authors gratefully acknowledge financial support from the Sustainable Energy Initiative at the Stanford Graduate School of Business and the SteyerTaylor Center for Energy Policy and Finance at Stanford University. We are grateful to Gunther Glenk, Felix Baumgarte and three anonymous reviewers for helpful comments and feedback.
Author information
Affiliations
Contributions
Both authors contributed equally to the development of the research question, approach, and manuscript development. S.R. took the lead in developing the model framework; S.C. took the lead with the empirical analysis.
Corresponding author
Correspondence to Stephen Comello.
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Journal peer review information: Nature Communications thanks Rodica Loisel, Kelsey Horowitz and other anonymous reviewer(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Comello, S., Reichelstein, S. The emergence of cost effective battery storage. Nat Commun 10, 2038 (2019) doi:10.1038/s4146701909988z
Received
Accepted
Published
DOI
Further reading

Energy balance of an airlift bioreactor used for electrical power generation in energy storage
Chemical Engineering Science (2019)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.