Abstract
Pathogens face varying microenvironments in vivo, but suitable experimental systems and analysis tools to dissect how threedimensional (3D) tissue environments impact pathogen spread are lacking. Here we develop an Integrative method to Study Pathogen spread by Experiment and Computation within Tissuelike 3D cultures (INSPECT3D), combining quantification of pathogen replication with imaging to study singlecell and cell population dynamics. We apply INSPECT3D to analyze HIV1 spread between primary human CD4 Tlymphocytes using collagen as tissuelike 3Dscaffold. Measurements of virus replication, infectivity, diffusion, cellular motility and interactions are combined by mathematical analyses into an integrated spatial infection model to estimate parameters governing HIV1 spread. This reveals that environmental restrictions limit infection by cellfree virions but promote cellassociated HIV1 transmission. Experimental validation identifies cell motility and density as essential determinants of efficacy and mode of HIV1 spread in 3D. INSPECT3D represents an adaptable method for quantitative timeresolved analyses of 3D pathogen spread.
Introduction
In molecular biology, reconstituting complex machinery by assembling its different components to a functional unit in vitro serves as ultimate proof for the achievement of overarching understanding. Intense efforts in all the life sciences aim at gaining similarly comprehensive insight into complex physiological processes involving large numbers of heterogenous cells and tissues. Building on knowledge derived from in vivo analyses, one approach is to use ex vivo tissue explants as physiological surrogates^{1}. Since organotypic cultures often remain largely refractory to experimental manipulation of tissue organization and composition, parallel and complementary efforts aim at reconstituting complex physiology by assembly of components ex vivo^{2}. These novel culture systems allow studying physiological processes at the molecular, singlecell and cell population level. Dissecting the contribution of individual processes on different complexity levels to the overall dynamics requires a systems level understanding of the factors involved. Mathematical and computational models have proven indispensable for connecting experimental data that are generally limited in spatial and/or temporal resolution in order to reveal and quantify physiological dynamics within multicellular systems. These approaches are intensively developed and applied in, e.g., cancer and immunology research^{3,4}, but have been much less adopted by other areas such as infectious disease research.
Pathogen spread in the infected host is a particular complex example for multifaceted interactions that can, depending on the balance between key parameters, result in disease or asymptomatic host control. Particularly for obligate intracellular pathogens such as viruses, but also cellassociated stages of many bacteria and parasites, intrinsic host cell behavior and local tissue environment likely present important determinants for the efficacy of pathogen spread. However, little information is available on such environment–pathogen interactions. In the case of human immunodeficiency virus type 1 (HIV1), many molecular aspects governing replication in isolated target cells, as well as innate and adaptive immune mechanisms of the host and viral evasion mechanisms have been elucidated^{5}. In contrast, little is known about (i) the impact the 3D environment exerts on these processes in different physiological target tissues and (ii) whether and how the virus adapts its replication and transmission strategies to such varying environments^{6}. HIV1 spread was initially thought to occur mostly via cellfree virus particles. More recently, it was revealed in in vitro cell culture models that cellassociated transmission modes via physical contact between infected donor and uninfected target cells are more efficient^{7,8,9,10,11}. For cellassociated transmission, donor and target cells typically engage in a close cell–cell contact referred to as virological synapses (VS) for the polarized release of virus particles^{12}. How tissue environments impact on virus spread and the modes of viral transmission remains to be established.
These gaps in our understanding of fundamental principles governing HIV1 spread in the host reflect the difficulty to dissect physiological mechanisms in currently available experimental systems or from clinical data. Studies in HIV1 patient cohorts or experimental infection of continuously improving animal models or target tissue explants allow establishing correlations to characterize important determinants of pathogenesis^{6,13}. However, key parameters such as cell density or biophysical properties and composition of target tissue remain largely refractory to experimental control or modification. On the other hand, standard twodimensional (2D), monotypic cell culture systems offer experimental control of many parameters but lack tissue heterogeneity and organization. For example, such experimental systems neglect that CD4 T cells are highly motile in vivo^{14}, and do not allow assessing the impact of HIVinduced reduction of T cell motility on infection spread^{15,16,17}. In addition, gravity rapidly converts standard suspension cultures of CD4 T cells into monolayers with dense cell packing. Within the concept of cellassociated HIV1 transmission, culturing cells in such high density likely overrides the requirement for motility of donor and target cells to form cell–cell contacts for virus transmission. Importantly, Tcell motility is also the main reason why observations of successful transfer of viral material between motile cells could not be coupled to analyzing whether this transfer leads to productive infection: by the time viral gene expression in the target cell can be detected, donor and target cells have moved away from the disassembled VS, precluding identification of the causative contact^{11,17,18}.
To overcome these experimental barriers for studying pathogen spread in physiological conditions we introduce here INSPECT3D, an Integrative method to Study Pathogen spread by Experiment and Computation in Tissuelike 3D cultures, and apply its stepwise protocol to the analysis of HIV1 spread (Fig. 1a). We establish 3D collagen matrices as a synthetic and tunable experimental system for analyzing HIV1 spread ex vivo in primary human CD4 T lymphocytes within a defined 3D environment (step 1). Experimental quantification of critical parameters over 3 weeks characterizes virus spread on the level of the bulk cultures (step 2), as well as individual pathogen (step 3) and cell dynamics (step 5) by single particle and cell tracking. Since the complexity of relevant parameters defining the spread of infection precludes their comprehensive experimental analysis, the experimental data is used to parametrize mathematical models describing population dynamics (step 4) and singlecell motility (step 6). Combining both models into an integrated spatial infection model (step 7) allows predicting previously unrecognized key parameters governing HIV1 spread, such as cellcontact requirements and target cell motility, which are validated experimentally (step 8). Applying INSPECT3D to HIV1 replication in 3D collagen cultures of T lymphocytes reveals that the 3D environment restricts infection with cellfree HIV1 but promotes the formation of longlasting cell contacts for transmission of cellassociated HIV1. In addition, these analyses provide a quantitative, timeresolved understanding of the infection dynamics. The approach is vital for gaining insight into pathogen spread in multicellular systems and is adaptable to a broad range of viral, bacterial, and parasitic pathogens.
Results
Ex vivo 3D cultures for HIV1 spread in primary CD4 T cells
As a first step toward investigating HIV1 spread in tissuelike environments (step 1, Fig. 1a), we established cultures of human CD4 T lymphocytes in a 3D matrix in which individual experimental parameters can be controlled and compared with standard suspension culture conditions. Collagen was used as 3D matrix because of the following characteristics: Collagen I is the most abundant fibrous protein in healthy interstitial tissue^{19} and can be polymerized into matrices of different densities. Collagen cultures are wellestablished to study T lymphocyte motility and function in 3D^{20,21} but are not frequently used in infectious disease research. These cultures are amenable to livecell imaging^{15,22,23} and provide a scaffold for Tcell migration, but—based on the spacing of filaments—should not hinder diffusion of cellfree HIV1 particles. Moreover, collagen can be dissolved by collagenase to retrieve cells for phenotypic characterization^{24,25}.
Human peripheral blood mononuclear cells (PBMCs) from healthy blood donors were activated by a combination of PHA and antiCD3 antibody (see Methods) to result in ~95% primary human CD3 T cells of which typically 72–76% were CD4 T cells and 18–22% were CD8 T cells. The amount of CD8 T cells present in the culture served as overall indicator of cell health and enabled to monitor CD8 Tcell expansion which is also observed during acute and chronic HIV1 infection in patients^{26,27}. These cultures were infected with either wildtype HIV1 NL4.3 or with the replicationcompetent HIV1 variant NL4.3DispYFP (Supplementary Fig. 1a). The latter encodes for all viral proteins and in addition expresses membraneassociated EYFP at the surface of virus producing cells. Sorting of infected cells via DispYFP using antibodycoupled magnetic beads turned out to be more efficient than other tags and can be achieved without the need for operating specialized equipment such as cell sorters under elevated biosafety conditions (Fig. 1b, Supplementary Fig. 1a, b). First round infected and uninfected cells were mixed in defined amount and ratio, and cultured in suspension or embedded in 3D collagen at a density of 1×10^{5} cells per 100 µl (Fig. 1b). While culturing T cells in suspension leads to high cell density at the bottom of the culture dish, embedding the same number of cells in 3D collagen resulted in welldefined cell spacing. Under these 3D culture conditions, cells remained viable for up to 3 weeks (Supplementary Fig. 1c). Analysis of the cell culture supernatant and matrix allowed for quantification of virus production over time, and cells could be reisolated from the collagen matrix for phenotypic characterization of cell and virus populations (e.g., determination of relative and absolute numbers of specific cell populations by flow cytometry) (Fig. 1c, see gating strategy in Supplementary Fig. 1d). In addition, the good optical properties of collagen allow for quantification of virus diffusion, cell migration, as well as formation of cell–cell contacts between infected and differentially labeled donor and uninfected target cells by livecell microscopy. The analysis of pathogen spread in 3D collagen cultures therefore provides quantitative information on the entire cell and pathogen population, but also at the level of single cells and pathogens (Fig. 1a, c).
3D culturing affects HIV1 spread kinetics
Quantification of HIV1 replication on the level of the bulk culture (step 2, Fig. 1a) indicated robust virus replication and active viral spread characterized by continuous production of virus particles (Fig. 1d). Virus replication was compared with cultures treated with the HIV1 fusion inhibitor T20 from day 0 to limit virus production to cells that were infected during the initial round of infection. Replication kinetics in collagen were markedly delayed relative to suspension, reached similar maximum titers 1 week later (Fig. 1d, Supplementary Fig. 2a), and showed overall reduced virus replication (Supplementary Fig. 2b). The delayed replication kinetics in 3D collagen was reflected in a delayed increase in infected CD4 T cells (Fig. 1e, Fig. S1 Supplementary Fig. 2c), was associated with a moderate reduction in overall infection in most donors (Supplementary Fig. 2d), and resulted in markedly delayed CD4 Tcell depletion with less pronounced overall loss of CD4 T cells over the course of the experiment (Fig. 1f, Supplementary Fig. 2e). The delay of HIV1 spread by the 3D environment was not caused by a general impairment of T cell permissivity to HIV1 infection, as cells cultured in collagen were even slightly more susceptible to HIV1 infection than cells in parallel suspension cultures (Supplementary Fig. 2f–h). 3D collagen environments thus strongly affect the kinetics of HIV1 spread.
HIV1 particle diffusion and infectivity in 3D collagen
In search for explanations of the delay in HIV1 spread in 3D collagen we developed approaches to address if 3D collagen affects the availability of cellfree virus particles for infection (step 3, Fig. 1a). Since infection of target cells by cellfree virus requires their diffusion in the culture, we first determined the diffusion properties of fluorescently labeled HIV1 particles (pcHIV^{GFP} or pcHIV^{mcherry}) in medium (suspension) or upon incorporation into 3D collagen (Fig. 2a) by spinning disc confocal microscopy. Images were subjected to automated probabilistic particle tracking, resulting in trajectories of individual HIV1 particles that were used for mean square displacement (MSD) analysis. Subsequent curve fitting revealed the ability of HIV1 particles to diffuse in 3D collagen without accumulation at, e.g., collagen fibers and quantified viral diffusion (Fig. 2a, b)^{28}. Normal diffusion was observed for virions in suspension (linear MSD curve, diffusion exponent α = 1.03) and the obtained diffusion coefficient D = 3.18 µm² s^{−1} was comparable to theoretical expectations based on the used media conditions (D = 4.38 µm² s^{−1}, Stokes–Einstein equation for virions of 150 nm diameter at 37 °C in water) (Fig. 2c, d). We typically started our experiments with 5% (1 out of 20) infected donor cells and hence considered how much time virions spend to reach the 19 nearest neighbors of a virus producing cell. Based on the determined diffusion rate, this would require about 2.2 min in the dense packing of suspension cultures (Fig. 2e). In collagen, however, diffusion occurred at reduced rates (anomalous diffusion exponent α = 0.86, Fig. 2c, d) and indicated a pattern of subdiffusion, which is typical for solute transport in porous media^{29}. Considering the cell spacing in 3D collagen, diffusion of virions from a producer cell to the 19 nearest neighbors would require almost 1 day (22.6 h). Based on the halflife of HIV1 particle infectivity of 17.9 h^{30}, this would be associated with 58% loss of infectivity (Fig. 2e). In addition, singleparticle tracking revealed that within an observation time of 5 min considerably more viral particles underwent transient phases of low mobility in collagen than in suspension (7.4% of all particles in collagen compared with 1.08% in suspension, Fig. 2f). Since we did neither observe longlasting virion–collagen interactions resulting in decoration of collagen fibers nor aggregation of virions, these phases of low virion mobility likely represent transient contacts with collagen fibers. Considering these frequent immobilization events detected within this short observation window, it can be assumed that within the infectivity halflife of 17.9 h, virtually all particles will encounter collagen fibers. Although such physical contact with collagen fibers did not alter the halflife of RT activity (Supplementary Fig. 3a), collagen severely compromised the infectivity of HIV1 particles, both for virus produced and virus directly embedded within the matrix (14.0+/−13.6% and 6.7+/−2.9%, respectively, relative to suspension at 100% relative infectivity, Fig. 2g). Finally, virus production as determined by released RT activity was significantly reduced in collagen compared with suspension cultures (41.3+/−18.9% relative to suspension, Supplementary Fig. 3b). Together, these results revealed that a 3D collagen environment reduces virion diffusion rates and restricts particle infectivity as well as production. 3D environments can thus pose a significant barrier to cellfree HIV1 infection.
HIV1 spread in 3D collagen of different densities
To better dissect the impact of different environments on HIV1 spread, we further exploited the versatility of collagen as matrix for ex vivo culture systems and compared matrices with different collagen concentrations and crosslinking that display high or low confinement (dense and loose collagen), and hence represent a range of heterogeneous tissues. These 3D cultures do not reflect the precise heterogeneity and architecture of a specific target tissue. However, Tcell density and migration speeds are reminiscent of nonlymphoid peripheral, mucosal tissue^{31,32}. Surprisingly, we found that loose collagen was more restrictive to HIV1 spread than dense collagen and allowed only for an initial increase in the production of virus particles that remained at a moderate basal level (Fig. 3a, b, see Supplementary Fig. 4a and 4b for viral replication curves including mock and T20 controls and statistical analysis of results obtained from 10 experiments with individual donors, respectively). This moderate efficacy of virus replication in loose relative to dense collagen was paralleled by low levels of productively infected cells (Fig. 3b) and only subtle depletion of CD4 T cells (Fig. 3c).
A mathematical model to analyze HIV1 spread in 3D collagen
The results above revealed that 3D environments shape the efficacy and dynamics of virus spread and individual virion infectivity. However, limitations in either spatial resolution (populationbased measurements, step 2, Fig. 1a) or temporal extent (imaging, step 3, Fig. 1a) impair the direct and simultaneous experimental assessment of the relative contribution of individual parameters, such as cellfree and cellassociated viral transmission, to the overall infection dynamics. Overcoming these limitations, mathematical models can provide a systematic and quantitative understanding of the interactive processes within such multicellular systems and represent a tool to quantify parameters that are not directly experimentally accessible (step 4, Fig. 1a). We therefore conducted indepth mathematical modeling of virus spread kinetics in suspension and 3D collagen to disentangle the effects of replication efficacy, cell motility and contact times on the infection dynamics. Particularly we determined to which extent cellfree and cellassociated viral transmission modes are influenced by the specific environments. Extending previous standard models for viral dynamics (reviewed in ref. ^{33}), we developed a kinetic mathematical model based on ordinary differential equations (ODEmodel) that describes the dynamics of CD8 cells, uninfected and infected CD4 cells, as well as the concentration of viral particles and their production by infected cells (Fig. 3d). In particular, our mathematical model discriminated infection by cellfree and cellassociated viral transmission^{30,34}, distinguished between viral concentrations in matrix and supernatant, and additionally accounted for an “adaptation phase” characterized by delayed proliferation that cells experience after transfer into their environment. Using a stepwise approach by combining our mathematical model with additionally obtained experimental data (see Methods), we were able to reliably quantify the parameters describing cellular turnover and infection kinetics within the different environments (Table 1).
Specifically, our model explains the observed dynamics for all different components measured, including amounts of infected as well as total CD4 T cells, CD8 T cells and virus titers in the cell culture supernatant and the matrix (Fig. 3e, Supplementary Fig. 5a, b). We found that the different environments neither affect the proliferation of CD4 target cells (λ^{S}_{CD4} = 0.60 [0.36, 1.02] d^{−1} vs. λ^{L}_{CD4} = 0.78 [0.36, 1.29] d^{−1} vs. λ^{D}_{CD4} = 0.59 [0.32, 0.89] d^{−1}), nor the rate at which infected cells die (δ^{S}_{I} = 0.42 [0.40, 0.44] d^{−1} vs. δ^{L}_{I} = 0.48 [0.46, 0.50] d^{−1} vs. δ^{D}_{I} = 0.52 [0.51, 0.56] d^{−1}_{,} numbers in brackets represent 95%confidence intervals of estimates) (see Table 1). All three environments have a similar maximum capacity for total CD3 T cells (Τ^{S}_{C} = 3.11 [2.72, 3.56] × 10^{5} cells well^{−1} vs. Τ^{L}_{C} = 3.53 [2.80, 4.52] × 10^{5} cells well^{−1} vs. Τ^{D}_{C} = 4.28 [3.15, 6.37] × 10^{5} cells well^{−1}). Thus, the high depletion of CD4 T cells in suspension cultures is compensated by a higher proliferation rate of CD8 cells in this environment (λ^{S}_{CD8} = 1.13 [0.74, 1.74] d^{−1} vs. λ^{L}_{CD8} = 0.58 [0.24, 1.01] d^{−1} vs. λ^{D}_{CD8} = 0.29 [0.12, 0.56] d^{−1}). Importantly, our model robustly inferred the contribution of cellfree and cellassociated infections to viral spread in suspension and 3D cultures (Fig. 3f, g). In suspension, virus spread was found to be mainly driven by cellfree infection, since no contribution of cellassociated infection was required to explain the experimental data (Fig. 3f, g). In contrast, HIV1 spread in collagen relied to a large extent on cellassociated modes of virus transmission with a maximum of only 22% [possible range between 0.0% and 27.0%] and 37% [possible range from 0.0% to 44.2%] of infections resulting from cellfree transmission in loose and dense collagen, respectively (numbers in brackets define the 95%confidence intervals of estimates). The probability for infection of cells by cellassociated transmission is estimated to be more than ~7 and ~4fold higher in loose and dense collagen, respectively, compared with suspension (Supplementary Fig. 5c). Our kinetic model thus indicated that 3D environments exert strong selection pressures toward the use of cellassociated modes of HIV1 transmission.
Singlecell motility and contact analysis
The kinetic mathematical model indicated a comparable or even slightly higher contribution of cell–cell transmission in loose than in dense collagen cultures and cellfree infectivity was equally impaired by dense and loose collagen. The slower virus spread observed in loose collagen therefore suggested that cell–cell transmission is particularly inefficient under this culture condition. Due to the spacing between donor and target cells in 3D, cell motility is a prerequisite for cellassociated virus spread in these 3D environments. Understanding the kinetics of virus spread in 3D hence required analyzing cell motility and cell–cell interactions at the singlecell level. We therefore employed livecell widefield microscopy to analyze the motility of infected and uninfected cells in 3D (step 5, Fig. 1a). In dense collagen (Fig. 4a), elevated constriction confined cell motility that resulted in frequent turning and moderate cell speeds (Fig. 4b–d). Consistent with previous observations in vitro and in vivo^{15,16,17,35}, HIV1 infection impaired Tcell migration leading to reduced cell velocities (mock: 5.6+/−2.0 µm min^{−1}, HIV1: 43.2% reduction in cell speed to 3.2+/−1.6 µm min^{−1}, Fig. 4d, Supplementary Movie 1) and longer arrest phases (Fig. 4e). In comparison, lower constriction in loose collagen (Fig. 4f) allowed for overall enhanced cell migration, resulting in more even and extended migration tracks (Fig. 4g, h). Overall migration was also faster (mock: 8.9+/−3.8 µm min^{−1}, HIV1: 31.6% reduction to 6.1+/−4.07 µm min^{−1}, Fig. 4i), since cells underwent less arrest phases than in dense collagen (Fig. 4j, compare 24.7+/−28.4% in loose to 34.9+/−28.5% for mock cells in dense collagen, Fig. 4e, Supplementary Movie 2). With a 2.1 and 2.5fold increase in arrest coefficient for dense and loose collagen, respectively, the reduction of Tcell motility by HIV1 infection was comparable for both collagen densities (Fig. 4e, j). However, less constriction in loose collagen resulted in overall higher migration efficiencies for both infected and uninfected cells.
As cellassociated transmission was identified to dominate HIV1 spread, livecell imaging was used to investigate cell–cell contact formation. Green and red cell dyes were used to label HIV1 infected and uninfected T cells, respectively, and to monitor cell contacts between both cell types after mixing. Analyzing contact parameters in a quantitative manner required the implementation of customized advanced segmentation and tracking algorithms in Ilastik with subsequent manual track correction with the Image J plugin MaMut (Fig. 4k). Cell tracking resulted in cell trajectories with potentially multiple circular spots per cell and per time point. The true cell contour was then approximated by the convex hull of all spots of a given cell (Fig. 4l), such that the cell shape could be followed over time. Cell–cell contacts were then detected as overlapping cells, which were identified by mutually overlapping convex hulls (exemplary illustrated in Fig. 4m for a red target cell in contact with a green infected cell. See Methods for details on the contact analysis). As expected, faster migration in loose collagen resulted in a higher frequency of cell–cell contacts for both uninfected target (target) and infected donor (donor) cells than observed in dense collagen (Fig. 5a–c). However, cell contacts between donor and target cells in dense collagen occurred more frequently within very compact and stable aggregates, while contacts were more dynamic and shortlived in loose collagen (Fig. 5a, c, d, Supplementary Movie 3). Formation of stable cell–cell contacts (arbitrarily defined as lasting at least 7 min) was approximately three times more frequent between donor and target cells than between two target cells in both collagen environments (Fig. 5d). Importantly, such stable donortarget cell contacts were over three times more frequent in dense than in loose collagen (Fig. 5d) and donortarget cell contacts lasting for at least 10 min were observed exclusively in dense collagen (Supplementary Fig. 6a). For contacts between two target cells, the cumulative cellcontact duration was similar between loose and dense collagen with only a minority of cells engaged in cell–cell contacts for more than 20% of the observation period (Supplementary Fig. 6b). Shorter contact duration was therefore compensated by a higher partner frequency in loose collagen. While a similar pattern was observed for donortarget cell contacts in loose collagen, >30% of donor cells were in contact with target cells for more than 30% of the observation period (Supplementary Fig. 6c). This resulted in a 2.4fold higher cumulative contact duration between donor and target cells in dense collagen than in loose collagen (Supplementary Fig. 6d). Livecell imaging and individual cell tracking thus revealed that fast migration in loose collagen is associated with short contact duration and that more efficient virus spread in dense collagen is associated with extended contact duration between donor and target cells.
An in silico integrated spatial model for HIV1 spread
Determining how singlecell motilities and contact kinetics obtained from timerestricted livecell imaging relate to overall population dynamics requires an integrative method that is able to examine multicellular dynamics over long time periods. Computational models that follow the collective dynamics of individual cells provide such a framework. We developed a cellular Potts model (CPM) that provides a computational simulation of cell motion accounting for biophysical properties of individual cell types^{3,36} (step 6, Fig. 1a). In contrast to the kinetic ODEmodel developed above, the CPM allows us to directly simulate cellassociated virus transmission between cells migrating in collagen matrices by reflecting the spatial details of individual cell migration and contact dynamics. As loose collagen conditions were most restrictive to infection, we recapitulated these conditions by using an automated parallelized computing method to adapt the CPM to the experimentally observed motility characteristics of infected and uninfected cells obtained from timelapse imaging (Fig. 6a, Supplementary Movie 4). The obtained parameterization closely mimicked important parameters of motility of individual cells, such as cell velocity, arrest and MSD (Fig. 6b–d). Moreover, corroborating the appropriateness of the obtained parameterization, the CPM adjustment resulted in simulated rates of partner encounters for uninfected and infected cells (Fig. 6e) and percentages of longlasting contacts between infected and uninfected cells (3.4% (sim) vs. 3.1% (exp) of all contacts) (Fig. 6f) that were in good agreement with our experimental data. To investigate the influence of various cellcontact requirements on the longterm infection dynamics, the CPM adjusted to the individual cell motility characteristics could now be extended to recapitulate the experimental infection assays. To this end, we incorporated a cell–cell infection process into our CPM and accounted for the particular processes and rates deduced by our kinetic ODEmodeling approach (Table 1). These parameters included an estimated viral eclipse phase in which cellassociated transfer from infected to target cells does not yet occur and cell proliferation rates, as well as a maximal cell density that can be reached in the culture system (culture capacity) (see Methods for the specific details of recapitulating experimental conditions). Following this approach allowed us to assemble dynamic and timeresolved information from populationbased and singlecell measurements in an integrative spatial infection model to dissect the dynamics of pathogen spread (step 7, Fig. 1a). Within this model we could vary the minimal contact duration required for productive cell–cell virus transmission from donor to target cell and extrapolate infection kinetics. These analyses predicted that loose collagen conditions would be well permissive to HIV1 spread if productive infection would only require 15 min. This suggested that (i) longer lasting cell contacts are required for productive HIV transmission and thus (ii) only a fraction of contacts defined above as longlasting (more than 7 min) lead to productive infection of target cells. Expanding the minimal contact duration required for productive HIV transmission to 25 min approximated experimental infection kinetics (Fig. 6g). Thus, our computational procedures identified ~25 min as the lower threshold for the duration of cell–cell contacts leading to productive HIV1 transmission in 3D collagen.
Experimental validation of the in silico infection model
If faithfully reflecting the dynamic processes governing pathogen spread in 3D, the integrative spatial infection model should predict important parameters that govern the spread of infection (step 8, Fig. 1a). To test this, we sought to dissect the relevance of cell density on virus spread and simulated cell–cell interactions using a constant amount of infected cells mixed with a 2, 5 and 10fold increased number of uninfected target cells (Fig. 7a). As expected, increased target cell densities were generally predicted to expand the time that infected donor cells spend in contact with uninfected target cells, as contacts become more frequent (Fig. 7b–d). A twofold higher target cell concentration only led to moderate changes in the contact characteristics. In contrast, a fivefold higher number of target cells substantially increased the cumulative time an infected cell spent in contact (average cumulative contact time per infected cell per hour: 16.3 min or 27% of the time (1×); 21.4 min/36% (2×); 38.3 min/64% (5×)) (Fig. 7c) as well as the frequency of different partners that are detected during this time period (Fig. 7b, d). Although the fraction of longlasting contacts between infected and uninfected cells was predicted to be unaltered by this fivefold increase in target cell density (Fig. 7e), simulating the longterm infection dynamics for different multiplicities of target cells suggested that under these conditions, HIV1 spreads efficiently in loose collagen (Supplementary Fig. 7a, b). Substantially higher target cell concentrations (10×) leading to densely packed environments even increased this efficiency by additionally affecting cell contact characteristics (Fig. 7d, e). These results suggested that limited average durations of individual donortarget cell contacts can be compensated by an enhanced frequency of cell–cell contacts. To test this assumption experimentally, we compared the infection dynamics within suspension (Fig. 7f–i) and loose collagen (Fig. 7j–m) using the standard and fivefold higher concentration of target cells (data with T20 and mock controls plotted to compare suspension vs. collagen at the same target cell multiplicity in Supplementary Fig. 7c–j). In suspension, virus production over time (Fig. 7g), the percentage of infected cells (Fig. 7h) and CD4 Tcell depletion (Fig. 7i) followed the same dynamics for both cell densities, indicating that the target cell concentration does not affect efficient viral spread in suspension. In contrast, enhancing target cell density in loose collagen, and thus creating an environment that is reminiscent of local T cell accumulation at foci of SIV infection within the macaque vaginal mucosa^{37}, increased the abundance of infected cells (Fig. 7l). As predicted by the CPM, this increase in target cell density induced efficient virus spread that was significantly enhanced compared with the basal replication observed at lower cell density as assessed by virus production (Fig. 7k) and CD4 Tcell depletion (Fig. 7m). This experimental validation of the integrative spatial infection model underscores that by applying the full INSPECT3D analysis, quantitative and timeresolved understanding was achieved of key parameters that govern HIV1 spread in tissuelike microenvironments. Together, these results establish environmental impact on cellassociated modes of HIV1 transmission and cell density as central determinants of virus spread in 3D cultures.
Discussion
Studying pathogen spread in complex cell systems to understand the factors determining the observed dynamics requires an integrative approach combining experimental observations from different complexities and resolutions with imaging and computational analyses. Here we introduce INSPECT3D as a method for the quantitative analysis and mechanistic dissection of pathogen spread in tissuelike 3D cultures. As a first element, 3D cultures of primary human CD4 T cells are introduced as synthetic ex vivo model system to quantitatively study pathogen spread in welldefined and tunable microenvironments of varying characteristics. This culture system provides experimental control over a wide range of parameters including cell vs. matrix density and cell migration speeds. Furthermore, it allows quantitative and timeresolved analysis of pathogen diffusion, infectivity and replication dynamics, livecell imaging of cell motility and cell–cell interactions, as well as phenotypic characterization of donor and target cells. INSPECT3D thus yields quantitative and timeresolved information on single cell/pathogen as well as the population level. To facilitate the analysis of these complex imaging datasets, advanced image segmentation and tracking represents a second essential element of INSPECT3D. Finally, mathematical modeling is fundamental to process these complex experimental datasets to quantify parameters that are not experimentally accessible and to disentangle the influence of many independent processes on the complex dynamics of pathogen spread. These mathematical analyses are required to connect the individual observations from different spatial and temporal resolution within an integrative framework to get a systematic and quantitative understanding of the processes involved in pathogen spread. As a third element of INSPECT3D, we therefore performed iterative cycles of mathematical analyses and experiments to identify and quantify key parameters governing virus spread efficacy (Fig. 1a). Combined analyses of livecell imaging data and measurements of longterm infection dynamics with mathematical models allowed addressing the infection dynamics at a cell population level. In combination with the spatiallyresolved description of individual cell dynamics, we were able to generate an integrated in silico spatial HIV1 infection model, which allowed assessing the impact of motility and interaction patterns of individual cells on virus spread.
Herein, we customized INSPECT3D to the analysis of HIV1 spread in 3D cultures of primary human T lymphocytes, but this approach will be a rich resource for the entire infectious disease community. Considering the profound impact of the 3D environment on virus spread, culturing T lymphocytes in 3D collagen should be considered as a novel and easy to implement standard culture system for ex vivo replication studies of HIV1 but also any other lymphocytetropic pathogen. The experimental part of INSPECT3D can readily be applied to other important Tcell tropic pathogens including viruses (e.g., measles virus^{38}, human Tcell leukemia virus^{39}, dengue virus^{40}, and vaccinia virus^{41}) or parasites (e.g., Toxoplasma gondii)^{42}. Adaptation to B celltropic pathogens such as murine leukemia virus^{43} or EpsteinBarr virus^{44}, including antigenpresenting cell such as dendritic cells or macrophages to allow studying, e.g., intracellular bacteria (e.g., Listeria, Salmonella^{45}), or studies of coinfections with multiple lymphotropic pathogens only requires minor modifications in the cell purification protocol. Since penetration through the dense collagenous tumor interstitium has been found limiting for therapeutic success of oncolytic adenoviruses^{46} and cancer cells have more plasticity in 3D than in 2D, INSPECT3D can also be applied to optimize such intervention strategies. For these applications, the mathematical models developed here need to be adapted to the pathogenspecific replication and transmission characteristics.
We aimed at establishing and quantitatively characterizing a 3D culture system amenable to experimental variation of key parameters for studying HIV1 spread in a tissuelike environment. As in any reconstitution attempt of complex biological processes, this prototype model system does not recapitulate all aspects relevant to HIV1 spread in an infected individual as it lacks, e.g., adaptive and cellular immune responses with their corresponding cytokine milieus, does not reflect the precise tissue architecture and cell heterogeneity/density characteristic for individual target organs, and relies on nonphysiological activation stimuli to render CD4 T cells permissive to HIV1 infection. In addition to expanding the pathogen portfolio subjected to INSPECT3D analysis, future efforts will therefore focus on sequentially incorporating more aspects of in vivo physiology (e.g., antigenpresenting cells to deliver virus concomitant with antigenmediated activation of CD4 T cells) in this ex vivo 3D culture model. The precise steps required to enhance the complexity of this 3D ex vivo model will depend on the nature of the target tissue to be simulated, warranting independent efforts to develop surrogates, e.g., mucosal or lymphoid tissue. These developments will be paralleled by enhanced imaging approaches to track cell motility and interaction in 3D as well as corresponding computational efforts to model these more complex scenarios to faithfully reconstitute pathogen spread in distinct target organs ex vivo and in silico.
Despite these differences to in vivo physiology, this new ex vivo 3D culture system recapitulated the motility speeds of CD4 T lymphocytes and their reduction upon HIV1 infection observed in humanized mice^{17}. This allowed us for the first time to take into account the impact of cell motility on the efficacy of HIV1 spread and provided important new insights into the mechanisms that govern HIV1 spread in a 3D environment that are likely important for virus spread in vivo. Most importantly, our analysis revealed a potent influence of the 3D environment itself as it suppressed the infectivity of cellfree HIV1 particles and posed significant barriers to virion diffusion as well as cell motility. The current view on barriers to HIV1 spread in infected individuals is primarily focused on cellular, adaptive, and cellintrinsic mechanisms^{5,47}. Our results suggest that extracellular microenvironments can pose similar restrictions to virus spread. This interference does not require pathogen recognition or adaptive immune responses but is an intrinsic physical property of the extracellular matrix, for which we propose the term environmental restriction. Since cellfree infection is markedly impaired by the environmental restriction in 3D cultures, HIV1 spread depends to much larger extend on cellassociated transmission. The latter transmission mode is promoted by dense 3D environments that induce longlasting cell–cell contacts and possibly select for virus variants with efficient cell–cell transmission properties. While the molecular mechanisms underlying the restriction to cellfree and promotion of cellassociated infection remain to be established, our results suggest that infection by cellfree HIV1 particles is only a minor contributor to virus dissemination in the infected host and imply that cellassociated modes of HIV1 transmission largely predominate in tissue. The predominant use of cellassociated transmission would explain how blocking the exit of CD4 T cells from lymph nodes interferes with HIV1 spread^{17} and the microanatomical clustering of virus variants in humanized mice^{18}. Finally, these analyses also revealed two novel key characteristics of HIV1 cell–cell transmission in 3D: (i) individual cell–cell contacts need to last at least 25 min for productive transfer of HIV1 to target cells and (ii) increasing the target cell density is sufficient to drive HIV1 replication in a 3D environment in which elevated cell motility precludes formation of a sufficient number of longlasting cell–cell contacts. Live cell imaging revealed transfer of HIV1 proteins from donor to target cells for an average time of ~60 min, including shorter transfer periods of 20 min^{11,18,48}, but could not define whether such transfer events result in productive target cell infection. Our results reveal such relative short cell–cell contacts to be indeed sufficient for productive virus transmission. This has important implications for the conditions at which HIV1 can efficiently spread in tissue: While 3D environments facilitate cellassociated virion transfer by restricting cellfree infection, environmentdetermined parameters can also have negative effects on HIV1 cell–cell transmission. Elevated cell migration speeds such as in loose relative to dense collagen may reduce the efficacy of cellassociated HIV1 transmission, possibly reflecting that arrest for VS formation^{43} is more difficult for highly motile cells. Of note, increasing target cell density restored HIV1 spread in loose collagen by increasing the total number of permissive cell–cell contacts, thus generating a critical population size of infected cells sufficient for infection spread. This requirement for optimized matrix and target cell density for HIV1 spread in tissue is consistent with the elevated T cell density in SIV infected foci observed in vivo^{37}. In addition, the lack of sufficiently long permissive contacts could be compensated for by a series of shorter cell–cell contacts. This scenario resembles the mechanism of triggering Tcell receptor signaling at the immunological synapse, which occurs in the context of a longlasting, stable synapses formed by stationary cells or via repeated short interactions of motile cells (kinapse)^{49,50}. In analogy to the immunological kinapse, sequential interactions between the same target and one or more donor cells (virological kinapse) may result in expanded cumulative contact duration required for productive HIV1 transmission. The benefit of such virological kinapses may be the sequential accumulation of sufficient virus material without requiring full motility arrest. In addition, initial waves of transmitted virions might saturate target cell restriction factors to facilitate infection by particles transmitted via subsequent contacts.
This proofofconcept study illustrates the usefulness of engineered 3D environments coupled to mathematical modeling to further our understanding of pathogen spread dynamics in the infected host and to enable the dissection of underlying mechanisms. Applied to HIV1 spread in CD4 T cells, their use revealed (i) the motility of donor and target cells as important parameters governing the efficacy of HIV1 spread in 3D, (ii) tissuelike microenvironments as important regulator of mode and efficacy of HIV1 spread, and (iii) allowed to gain a quantitative and spatiotemporal understanding of HIV1 spread dynamics in 3D. INSPECT3D provides the infectious disease community with a framework to exploit the full potential of ex vivo tissue engineering for the analysis of pathogen spread.
Methods
Cell lines
HEK293T cells (ATCC, CRL3216) and TZMbl indicator cells (NIH AIDS repository^{51}, Cat# 8129; RRID: CVCL_B478) were maintained at 37 °C with 5% CO_{2} in DMEM medium supplemented with 10% fetal calf serum (FCS) and 1% penicillin/streptomycin (Gibco). OKT3 hybridoma cells (ATCC, CRL8001) were maintained in IMDM (ATCC) supplemented with 20% heatinactivated FCS and 1% penicillin/streptomycin. Cells were passaged every 2–3 days at 70% confluency.
Primary human T cell isolation and culture
Human peripheral blood mononuclear cells (PBMC) were isolated from buffy coats from healthy individuals, as anonymously provided by the Heidelberg University Hospital Blood Bank in accordance with regulations of the ethics committee of the Medical Faculty of Heidelberg University. Cells were purified by Ficoll gradient centrifugation and washed in PBS. For activation, PBMC were split into three fractions that were individually stimulated with 0.5 µg ml^{−1} PHA, 5 µg ml^{−1} PHA and surfaceimmobilized antiCD3 mAb (OKT3 hybridoma supernatant) for 72 h at 3 × 10^{6} cells per ml in RPMI 1640 supplemented with 10% FCS and 1% penicillin/streptomycin (Gibco), all in the presence of 10 U ml^{−1} IL2. Subsequently, cells were pooled in highIL2 medium (10 ng ml^{−1}) and subjected to spininfection. This procedure resulted in ~95% of CD3 T lymphocytes with typically 70–80% CD4 T cells and 20–30% CD8 T cells. For infection with sortable HIV1 NL4.3.Disp.YFP, three donors were pooled and depleted of CD8 cells according to manufacturer’s protocol (Miltenyi Biotec) prior to activation.
Viruses
Virus stocks of replicationcompetent HIV1 strains (pNL4.3 SF2 Nef, pNL4.3.Disp.YFP) were prepared from transient transfection of 25 µg plasmid DNA into HEK239T cells (subconfluent 15 cm dish) with JetPei (50 µl, Peqlab) or linear polyethyleneimine (PEI, 142 µl of 1 mg ml^{−1}, Sigma Aldrich). For singleround HIV1 (pNL4.3 Δenv VSVG), 22 µg of pNL4.3 Δenv and 3 µg of VSVG were used. Two to three days after transfection, supernatants were harvested, filtered (0.45 µm), concentrated via ultracentrifugation through a 20% (w/w) sucrose cushion, gently suspended in PBS, and stored in aliquots at −80 °C. All virus preparations were handled in a Biosafety Level 3 (BSL3) containment laboratory in accordance with proper BSL3 safety procedures.
Virus cloning
The proviral plasmid coding for sortable HIV1, pNL4.3IRES.Display.YFP (pNL4.3Disp.YFP), is based on pNL4.3IRES.eGFP^{52}. Briefly, eGFP was replaced with Display.YFP based on pDisplay Vector (Catalog No. V66020, Invitrogen) using NcoI and XmaI. While the sortable tag (Display.YFP) allows isolation of infected cells (see below), it is lost after multiple rounds of infection.
Virus titer quantification by SGPERT
One step PCRenhanced reverse transcriptase assay (SGPERT) was used as a sensitive quantification tool for HIV virus titers and was performed as previously described^{53}.
Briefly, concentrated virus stocks were first diluted 1:100 in PBS, whereas culture supernatants were directly lysed in 2× lysis buffer (50 mM KCl, 100 mM TrisHCl pH 7.4, 40% glycerol, 0.25% Triton X100) supplemented with 40 mU per µl RNase Inhibitor for 10 min at room temperature. Lysed virus samples were diluted 1:10 in dilution buffer (5 mM (NH_{4})_{2}SO_{4}, 20 mM KCl, 20 mM TrisHCl pH 8). Ten microliters of diluted virus sample and 10 µl of a serial dilution of virus standard (HEK293T cell supernatant of pCHIV at 5.088 × 10^{9} pU per µl) were mixed with 10 µl 2× reaction buffer (1× dilution buffer, 10 mM MgCl_{2}, 2× BSA, 400 µM each dATP, dTTP, dGTP, dCTP, 1 pmol each RT forward and reverse primer, 8 ng MS2 RNA, SYBR Green 1:10,000) supplemented with 0.5 U of GoTaq Hotstart Polymerase. RTPCR reactions were performed and read in a realtime PCR detector (CFX 96, Biorad) using the following program: (1) 42 °C for 20 min; (2) 95 °C for 2 min; (3) 95 °C for 5 s; (4) 60 °C for 5 s; (5) 72 °C for 15 s; 80 °C for 7 s; repeat 3–6 for 40 cycles, (7) melting curve. Primer sequences were the following: RT fwd primer: TCCTGCTCAACTTCCTGTCGAG, RT rev primer: CACAGGTCAAACCTCCTAGGAATG.
Infectivity assay using TZMbl reporter cells
Subconfluent TZMbl cells were infected with serial dilutions of virus stocks or virus containing culture supernatant. After 48–72 h, cells were fixed with 3% PFA/PBS and incubated with βGal supplemented with 200 µg ml^{−1} XGal for subsequent counting of blue cells. Relative infectivity was calculated by dividing the infectivity by the used RT activity as determined by SGPERT (see above).
Spininfection of primary T cells
Activated PBMC (2 × 10^{5} cells well^{−1}) were resuspended with concentrated virus yielding 2 × 10^{4} blue cell units (MOI = 0.1) in a final volume of 50 µl in a 96well plate (Ubottom or Vbottom) in the presence of 4 µg ml^{−1} Polybrene. Plates were centrifuged at 2000 rpm for 90 min at 37 °C and transferred to the incubator for 4–6 h. Polybrene was washed out and cells were cultured for 72 h in RPMI medium supplemented with 10 ng ml^{−1} IL2 before analysis or setting up of collagen cultures.
Sorting of NL4.3.Disp.YFP infected human T cells
Activated and CD8depleted PBMC were sorted 72 h post infection with pNL4.Disp.YFP. Cells were resuspended in cold MACS buffer (PBS, 2 mM EDTA, 0.5% inactivated FCS) and mixed with antiGFP beads (1:30, Miltenyi Biotec, 130091125) for 15 min in the refrigerator. Unbound beads were removed by centrifugation and infected cells were purified twice using MS columns within an OctoMACS magnet (both Miltenyi Biotec) according to the manufacturer’s instructions. Isolation efficiency was monitored by flow cytometry on samples collected during isolation. Typically, this procedure yielded 90–96% positive cells after the second magnetic column.
Flow cytometry
To compare infection kinetics and depletion in collagen and suspension cultures, cultures were first treated with collagenase I (100 U, Worthington) for 30 min at 37 °C to yield cell suspensions. Cells were washed in PBS and stained with fixable viability dye 450 (eBioscience, 1:1000 in PBS) for 30 min at 4 °C, were washed in MACS buffer (PBS, 2 mM EDTA, 0.5% inactivated FCS) and subsequently stained with antiCD8PE Vio770 (1:100, Miltenyi Biotec, 130096556) and antiCD3PE (1:100, biolegend, 317308) for 30 min at 4 °C. After washing, cells were fixed in 3% PFA/PBS for 90 min. To detect intracellular p24, cells were permeabilized and stained with antip24FITC (1:100 KC57 Beckmann Coulter, 6604665) in 0.1% TritonX100/PBS for 30 min at 4 °C. Cells were washed in MACS buffer and for absolute cell quantification cell counting beads (biolegend) were added prior to analysis with a FACSVerse (BD) and FlowJo software (Tree Star). CD4 T cells were identified as CD3 positive/CD8 negative cells. Relative depletion was calculated by correlating the frequency of CD4 T cells in the respective sample to the frequency of CD4 T cells in T20 controls, which was set to 100%.
Proliferation assay by PKH26 dye dilution
For proliferation assays in parallel to infection kinetic experiments, a fraction of cells was stained with PKH26 in Diluent C (both Sigma Aldrich), according to manufacturer’s instructions (2.5 × 10^{7} cells in a total volume of 4 ml Diluent C with 2 µM PKH26 for 2 min at room temperature). Labeling reaction was stopped by adding equal volumes of heatinactivated FCS for 1 min, followed by centrifugation and further washing steps in serum containing medium. Cells were then cultured in suspension or collagen for 0, 2, 4, and 7 days. At these time points cells were processed for flow cytometry (viability dye, CD8 PEVio770, CD3 PE, no permeabilization, see above), fixed and analyzed with FACSVerse. The sample at day 0 served to verify uniform labeling and to identify the parent population. Generations were modeled using ModFit LT (Verity Software).
Generation of 3D collagen gels
Cellcontaining (1 × 10^{5} cells per 100 µl gel) collagen gels were prepared as described^{22}. Dense collagen gels (3.3–4.6 mg ml^{−1}) were prepared by mixing highly concentrated rat tail collagen I (BD) with bicarbonatebuffered MEM on ice (15 µl 10× MEM, 17 µl 7.5% NaHCO_{3} (both Gibco) and 120 µl rat collagen I). This buffered collagen was mixed 1:1 with cells (2 × 10^{6} cells per ml media, yielding a final concentration of 1×10^{5} cells per 100 µl gel), was transferred to 96 wells (100 µl well^{−1}) for longterm cultures or ibidi angiogenesis slides (10 µl well^{−1}) for microscopy and allowed to polymerize within 30 min at 37 °C. Loose collagen gels (1.6 mg ml^{−1}) were prepared correspondingly by mixing 750 µl bovine collagen I (PureColl, Nutacon) with bicarbonatebuffered Mem (50 μl 7.5% NaHCO_{3} and 100 μl 10× MEM) and combining it 2:1 with cells (3 × 10^{6} cells per ml media, yielding again a final concentration of 1 × 10^{5} cells per 100 µl gel mix) and allowed to prepolymerize at 37 °C for 5 min depending on the volume used. The collagencell mix was transferred to the respective well format and allowed to polymerize at 37 °C within 30–45 min. Polymerized gels were overlaid with prewarmed medium (RPMI 1640, FCS, PenStrep, 10 ng ml^{−1} IL2). Where indicated, both gels and this supernatant were further supplemented with fusion inhibitor T20 (100 µM, Roche).
Confocal reflection microscopy of collagen gels
Collagen matrix architecture was visualized by confocal reflection microscopy using the 488 nm laser and ×40 oil immersion objective of a Leica TCS SP5 microscope. A 10 µm stack of optical sections (zstack) was acquired in 0.5 µm slices, which were subjected to maximum projections using the LAS AF software.
Virus diffusion in 3D collagen
Fluorescent viral particles (HIV^{GFP} or HIV^{mcherry}) generated by cotransfection of HEK293T cells with pCHIV and pCHIV^{EGFP} or pCHIV^{mCherry}^{54} were incorporated into loose or dense collagen or suspended in medium. Movement of viral particles was recorded by a spinning disc microscope (UltraView ERS6 spinning disc confocal microscope, Perkin Elmer) at 37 °C at maximum speed (200 ms) for 5 min and was automatically tracked (see below).
Virus particle tracking and motility analysis
Automatic tracking of multiple fluorescent HIV1 particles was performed using a probabilistic particle tracking approach which is based on Bayesian filtering and probabilistic data association^{55}. This approach exploits multiple measurements and combines Kalman filtering with particle filtering. For particle detection, a LaplacianofGaussian filter was used. The tracking method yields trajectories of individual HIV1 particles.
Based on the computed trajectories, the motility of HIV1 particles under different 3D collagen conditions and suspension was analyzed and the motion type was determined. We performed a mean square displacement (MSD) analysis^{56}. MSD was computed as a function of the time interval Δt for each trajectory of a tracked HIV1 particle with a minimum time duration of 0.8 s (corresponding to five time steps). The MSD functions for all trajectories under one condition were averaged. An anomalous diffusion model \({\mathrm{MSD}} = 4\Gamma \Delta t^\alpha\) was fitted to the calculated MSD values which yielded the anomalous diffusion exponent α and the transport coefficient \(\Gamma \left[ {{\upmu {\mathrm{m}^2}}\,{\mathrm{s}}^{  \alpha }} \right]\)^{56}. We used MSD values from \(0{\mathrm{s}} \le \Delta t \le 7{\mathrm{s}}\). The motion was classified into confined diffusion (α ≤ 0.1), obstructed diffusion (0.1 < α < 0.9), and normal diffusion (α ≥ 0.9)^{57}. We also fitted the normal diffusion model \({\mathrm{MSD}} = 4\Gamma \Delta t\)^{56} to the MSD values to determine the diffusion coefficient D = Γ[μm^{2}s^{−1}].
In addition, based on the tracking result, events of particle interaction with the collagen structure were identified (sticking events). For all tracked HIV1 particles the velocities were computed and represented in a velocity histogram. From the histogram we determined a velocity threshold of \(v_{{\mathrm{Th}}} = 1.0\;\upmu {\mathrm{m}}\;{\mathrm{s}}^{  1}\) to distinguish different subpopulations. The interaction time of an HIV1 particle with the collagen structure was calculated as the time duration for which a particle yielded velocities below v_{Th}. For a consistent comparison of interaction times between different collagen conditions, we considered trajectories with a time duration of up to 15 s (corresponding to 76 time steps).
Livecell imaging in 3D collagen
Cells infected with HIV1 NL4.3DispYFP were purified by magnetic isolation as described above. Control CD4 cells from uninfected cultures were purified correspondingly with antiCD4 magnetic beads (Miltenyi Biotec, 130045101). Infected and uninfected cells were either embedded separately in collagen or were stained with PKH cell dyes as for proliferation assays to enable distinction between infected (green, PKH67) and target cells (red, PKH26) in cocultures. Cells within collagen gels were monitored in angiogenesis slides (ibidi) using bright field, and for stained cells, green and red channels of an inverse light microscope (×10 objective, Nikon TiE), equipped with climatisation control maintaining 37 °C and 5% CO_{2} (Perkin Elmer). For the duration of up to 3 h, micrographs were taken in 30 s to 1 min intervals.
Cell segmentation and tracking
To obtain cell trajectories we applied the trackingbydetection method available in ilastik^{58}. In this trackingbydetection method, the cells need to be segmented first. To do so, we employ a convolutional neural network to predict foreground probabilities for each pixel. More specifically, we use a Unet^{59} in its standard configuration using four stages of pooling to downsample, pixel replication for upscaling, skip connections, dropout in the convolutional layers, ReLU activation functions and batch normalization. We trained it to use the three available channels as input, using 10 manually annotated images as ground truth. Training data were augmented by applying elastic transformations. We ran 129 epochs of training until the loss seemed to have converged, and the resulting weights are employed to predict the foreground probability of all frames in all videos. The cell segmentation hypotheses are then given as connected components after thresholding these foreground probabilities.
Cell trajectories are reconstructed by finding the most probable configuration of a graphical model spanning the whole video^{60} where detections are assigned to detections in adjacent frames. To deal with occasional segmentation errors, where two seemingly overlapping cells are falsely combined in a single segment, the used tracking model allows for detections to be shared between multiple object tracks. Local evidence about these merged detections is injected into the model via an object count classifier that predicts the number of objects contained in every segment based on intensity and shape features computed from raw data and segmentation. The object count classifier itself was trained by manually annotating a few instances of single cells and mergers of different sizes on two datasets, and then applied to all videos. By solving an integer linear program, we find the globally most probable configuration of how many cells are contained in every segment and where they move in consecutive frames. In a postprocessing step, any merged detections are split using a Gaussian mixture model, with the number of components given by inference in the probabilistic graphical model.
The tracking results are then exported to the ImageJplugin MaMuT^{61} for manual corrections of the tracks, where also cell identity (infected if green, notinfected if red) is manually annotated.
Track analysis
Cell segmentation, automated tracking and subsequent manual track correction in the ImageJplugin MaMuT can for some tracks result in the identification of multiple spots per cell and time frame. Therefore, we first calculated centerofmass coordinates. Based on this data we calculate the instantaneous cell velocity, the fraction of mobile cells, the arrest coefficient (between 0 and 1 for a cell which is mobile or immobile for all time steps, respectively), the confinement ratio, the mean turning angle, and the mean squared displacement (MSD)^{3}. As a threshold to classify cells as mobile, we used 2 µm min^{−1} instantaneous velocity, as a wellaccepted threshold in the field of lymphocyte migration^{62}. To identify cell–cell contacts, we computed the convex hull as an estimator for the cell contour for each cell track at each time point. A cell–cell contact is then defined by mutually overlapping convex hulls at a given time point. From these data we then extracted contact frequency (fraction of time spent in contact with another cell) and partner frequency (how many different cells are contacted per time). Since the cells migrate in 3D collagen environments, but we record only a 2D projection as a single plane in widefield microscopy, we filtered out false positive cell–cell contacts that are displaced in zdirection. We tried various approaches and found the difference between maximal intensity values of cells to be a good discriminator to detect such false positives. The threshold for this difference was manually evaluated and contacts exceeding this threshold were excluded as false positive contacts from further analysis.
Modeling of cell proliferation and infection dynamics
We used a stepwise approach to analyze the experimental data for determining the contribution of cellfree and cellassociated transmission to viral spread in the different environments. Mathematical models of increased complexity based on ordinary differential equations (ODE) were combined with corresponding experimental measurements in order to quantify cell proliferation, viral turnover, and the infection dynamics.
Quantifying Tcell proliferation in uninfected cultures
Transferred CD8, T_{CD8}, and CD4, T_{CD4}, positive T cells are assumed to die with rates δ_{CD8} and δ_{CD4}, respectively, and to undergo competing proliferation with maximal proliferation rates λ_{CD8} and λ_{CD4} until a total capacity of T_{c} cells is reached. In addition, an adaptation phase, τ, which was fixed to 2.5 days, was included that accounts for the time transferred cells need to adapt to their new environments at the start of each experiment. During this time cells are lost according to their corresponding death rates. Tcell dynamics within the different environments can then be described by the following system of ordinary differential equations:
For parameter estimation, obtained T cell counts at day 0 were used as initial conditions.
Quantification of virus dynamics under T20 treatment
We used a model accounting for nonproductively, I_{NP}, and productively infected cells, I_{P}, virus in culture, V_{c}, and the supernatant, V_{s}, to describe virus dynamics after T20 treatment. As treatment by T20 is assumed to block any new infections, nonproductively infected cells either die at the same rate as uninfected cells, δ_{CD4}, or turn into productively infected cells with rate κ_{I}. Productively infected cells are assumed to have an average productive life span of 1/δ_{I} and release new virions into the culture with a viral production rate ρ. Virions diffuse to the supernatant with a diffusion rate κ_{v} and are cleared from the system at rate c_{v}, which is fixed to c_{v} = 0.44 day^{−1} to correspond to the halflife of RT activity of 38 h as evaluated experimentally. With this, infection dynamics after T20 treatment is then described by the following system of differential equations:
For parameter estimation, δ_{CD4} was fixed to the best estimate for the death rate of uninfected CD4 cells from the experiment in the absence of infection, and κ_{I} was set to 1.39 day^{−1} corresponding to a halflife of cells in eclipse phase of 12 h. To account for the change of media in collagen environments, viral concentration in the supernatant was set to 0 at day 2, 4, 7, 9, 11, 14, 16, and 18. As change of media leads to mixing in liquid environments, viral concentration in culture and supernatant was halved at days of media change in the suspension environment. This leads to the frequent drops observed in the predicted viral concentration in Fig. 3e and is required to estimate a single cellfree transmission rate β_{f} across different environments by accounting for the differing viral concentrations before and after media change.
Experimental measurements for productively infected cells and virus in culture and supernatant at day 0 were taken as initial conditions. As nonproductively infected cells cannot be detected by FACSanalysis, a proportion of noninfected target cells was estimated across all environments to define the initial concentration of nonproductively infected cells. Infected cell counts after day 9 were not considered in the analysis, as cell numbers were indistinguishable from background levels determined from the proliferation data.
Mathematical model for the complete infection dynamics
With the previous assumptions and descriptions, the complete mathematical model describing cell proliferation and infection dynamics for the cotransfer experiments of infected and uninfected cells (ODEmodel) is given by
Here, CD8 cells, T_{CD8}, and an additional population of refractory cells, T_{ref}, cannot get infected, but affect the proliferation capacity of target cells. The proliferation of target cells is determined based on the proliferation of refractory cells, λ_{ref}, and the expansion rate of the total CD4 population, λ_{CD4}. In addition, we distinguish between infectious, and noninfectious virus in the culture, with only a fraction, f_{i}, of virus produced by productively infected cells being infectious. Furthermore, infectious virus loses its infectivity with rate c_{i}, which is fixed such that the halflife of infectious virus is 17.9 h^{63}. To account for the two different transmission modes, activated CD4 cells can get infected either proportional to the concentration of infectious virus in the culture, V_{i}, with rate β_{f} (cellfree transmission) or proportional to the number of productively infected cells, I, at rate β_{c} accounting for cell–cell transmission.
The model was fitted to estimate β_{c} and λ_{ref} for each of the different environments. In addition, one transmission rate for cellfree infections, β_{f}, was estimated across all environments where β_{f} was reduced to 14% in collagen compared with suspension as evaluated experimentally (Fig. 2g). All other parameters were defined as described above or obtained from the previous analyses quantifying Tcell proliferation and virus dynamics during T20 treatment. Measurements for CD8, target and productively infected cells, as well as viral concentrations at day 0 were taken as initial conditions. As before, the initial proportion of noninfected target cells and refractory cells, as well as the proportion of infectious virus was estimated across all environments, as these values could not be measured.
Parameter estimation
All models were fitted to the data using the optimfunction in the Rlanguage of statistical computing^{64}. To avoid bias in parameter estimates due to reduced recovery of cells from collagen environments (only 55% of cells compared with suspension are recovered), cell counts from collagen cultures were normalized by multiplying each measurement by a factor of 1.8. Models were fitted to the mean values of three independent experiments to diminish experimental variance in the data using a maximum likelihood estimator that assumed normally distributed errors. The experimental variance in the data was neglected and a relative measurement error was estimated for T cells and viral load. Parameter identifiability was assessed based on a profile likelihood approach^{65}.
Cellular Potts model
To simulate migrating cells in a 2D collagen environment, reflecting livecell imaging videos, a cellular Potts model (CPM) formalism was applied using the software Morpheus^{66}. The CPM models cellular behavior in a gridbased environment with several connected grid sites defining a single cell^{36}. Each cell is characterized by a specific cell type, τ, and a unique identifier, σ, as well as its grid position defined by the coordinates u and v. Movement of cells is guided by stochastic membrane fluctuations that can result in a shift in position if a global energy function \({\cal{H}}\) is minimized^{67}. This global energy function \({\cal{H}}\), termed Hamiltonian, consists of a term describing the sum over all surface energies J, as well as volume and perimeter constraints per cell. The surface energy J (also denoted as Jvalue) is defined by the adhesion of each cell to its surrounding cell types or media. The surface energy of each cell is multiplied with the term (\({1}\, −{\delta}_{{\sigma}_{u},{{\sigma}_v}}\)), where δ defines the Kroneckerdelta (\({\delta}_{{\sigma}_{u},{\sigma}_{v}}\) = 1 if σ_{u} = σ_{v} and 0 otherwise) to consider only interactions between different cells. Volume and perimeter constraints ensure that cells try to maintain their size. The constraints are defined by the squared difference between the current cell volume or perimeter (a_{σ}, p_{σ}) and the target cell volume or perimeter (A_{σ}, P_{σ}), respectively. The terms are multiplied by a Lagrange multiplier λ, determining the strength of the constraint^{68}. The formula for \({\cal{H}}\) therefore results as
To simulate cell motility, at each simulation step a grid site within the 2D lattice is chosen at random. For this selected grid site, one of the eight neighboring grid sites not belonging to the same cell is chosen at random for a possible shift in position. If the shift decreases the global energy, the site is copied to this random position^{36}, otherwise the copy attempt is accepted with the Boltzmann probability of \(e^{  {\mathrm{\Delta }}{\cal{H}}/T}\). Thereby, the parameter T defines the membrane fluctuation amplitude of cells for exploring the neighborhood. Target and infected cells are assumed to be motile with both cell types following persistent motion. Persistence is characterized by the stability to keep the direction of movement and a memory of this direction (directionupdate interval), meaning each cell is more likely to follow a path close to its current direction. Persistent motion is implemented into the CPM by extending \(\Delta {\cal{H}}\) by \({\mathrm{\Delta }}{\cal{H}}\prime = {\mathrm{\Delta }}{\cal{H}}  \mu {\mathrm{cos}}(\alpha ),\) with α being the angle between the target and considered direction^{3}. Therefore, a copy attempt to a new lattice site is likely to be accepted if α is small.
Simulation environment and default parameters
We simulate a total area of 800 × 800 μm^{2} with each grid site of the lattice having a length of 1 μm. Each grid point in the lattice is surrounded by eight neighbors, following Mooreneighbor conditions. In addition, we assume periodic boundary conditions with cells leaving at one side of the grid reentering at the opposite side. Our simulation distinguishes between infected and uninfected T cells, collagen particles and free space. T cells were defined with a target area of A_{T} = 100 μm^{2} and a connectivity constraint^{69} that prevents cells from breaking apart. While infected and uninfected T cells were considered as being motile, collagen particles were implemented motionless but deformable. For loose collagen simulations, we used a total number of 14,400 collagen particles with a target area of A_{C} = 20 μm^{2} and a target perimeter of P_{C} = 0.2 μm. The energy between collagen particles (J_{CC}) collagen and medium (J_{CM}) and in medium (J_{MM}) was set to 0 to allow the formation of collagen structures^{68}.
In our simulations, one simulation step corresponds to 1 s in real time. Cell positions and celltocell contacts were recorded every 30 s according to the frame rate used for livecell imaging. A celltocell contact is registered when two adjacent cells share one lattice site. For each simulation, an initial phase of 200 s is run before measurements are taken to allow the system to reach steady conditions.
Parameterizing cell motility
To parameterize the motility of infected and uninfected cells in our CPM, we adjusted our model based on measurements from the timelapse image analysis following both cell types for 1 h in loose collagen environments. We used the computational parallelization and highperformance approach “pyABC”^{4,70} to automatically adjust simulation parameters to experimental data. The computational pipeline overcomes the problem of statistical interference for parameter fitting in stochastic multiscale models by using a parallel approximate Bayesian computation sequential Monte Carlo (pABCSMC) algorithm^{4}. The pyABC workflow tests multiple parameter sets in parallel by subsequently minimizing distance measurements between experimental and simulated data. To this end, each simulation is evaluated using the R Motilitylab package (http://www.motilitylab.net) to calculate the mean square displacement, the velocity, mean turning angle, straightness and arrest coefficient of each infected or uninfected cell (see above for the calculation of these quantities). The distance between simulations and in vitro measurements was then determined based on a weighted sum of leastsquares for these quantities. To account for differences in measurement scales of velocity, mean turning angle, straightness and arrest coefficient, we calculated the coefficient of variance, which gives a standardized variance with the ratio between standard error and mean. The squared distance of coefficients of variance between experimental and simulated data was added to the leastsquare distance, d_{i}, for each quantity i resulting in the distance measure
Here, μ_{i} and σ_{i} are the mean and standard deviation, respectively, of the experimental data, and u and s the corresponding values of the simulations. The total sum of leastsquares defining the distance between simulated and experimental data is then given by
The weighting factor of 0.01 for the MSD distance was chosen to ensure that all different quantities were weighted equally. Because the MSD can reach values from 0 to 10^{5} μm^{2} s^{−1}, the calculated distances for this quantity become large at later time points, rendering the contribution of all other motility measurements to the total distance negligible. The obtained parameter sets resulting in the smallest distance between experimental and simulated cellular motilities are shown in Supplementary Table 1.
In silico spatial infection model
To analyze longterm infection courses and investigate celltocell transmission on a singlecell level, we extended our CPM by including the processes of infection, viral replication, cell proliferation, and death parameterized with values obtained by our ODEmodel. Infection was implemented allowing celltocell transmission from infected to uninfected target cells. An infectious celltocell contact was defined by a minimal contact duration, D_{min}, between the two cells. The contact duration, D, between two cells increases incrementally as long as the contact is not broken. A contact is considered as broken if no lattice site is shared between two cells, resetting D = 0. If D > D_{min}, an infection event was triggered. Upon infection, the newly infected cell entered an eclipse phase for on average 1/κ_{I} = 17.3 h to account for viral integration and replication, in which the cell keeps the target cell motility characteristics and is not yet productively infectious. At the end of this phase, the cell turns into an infected cell with the ability to infect other target cells. Here, we studied a multiple infection model, i.e., with an infected cell able to infect several CD4 target cells simultaneously if a minimal contact duration between the cells is fulfilled. To match the experimental conditions, we additionally considered a population of CD8 T cells in the simulations that followed the same motility characteristics as uninfected CD4 T cells, as well as a fraction of refractory CD4 T cells. Accounting for cellular turnover, both cell populations are considered to proliferate and die during the timecourse of a simulation. As before, we assume density dependent proliferation of CD4 and CD8 T cells with the actual proliferation rates calculated at each time step by
Here, λ_{X} defines the maximal proliferation of the specific cell type, N the actual total number of cells in the grid, and C the carrying capacity of the grid in number of cells. Given loose collagen conditions and using the standard cell concentration, the simulated grid can hold a maximum of C = 1200 cells with still 37.5% free space, which is comparable with values obtained by confocal reflection microscopy. At each time step, for each cell a division event is then determined with probability \(1  e^{  \lambda _{\mathrm{X}}}\). We assume that infected CD4 T cells do not divide, and that cell division only occurs after an initial adaptation phase. Similar to cell proliferation, the probability of a cell to die is calculated at each time step by \(1  e^{  \delta _{\mathrm{X}}}\), with δ_{X} defining the constant death rate of the corresponding cell population, i.e., infected CD4, refractory, and uninfected CD4 and CD8. Cells in eclipse phase are assumed to keep the same death rate as uninfected CD4 cells. For our simulations, we used the rates for cell proliferation (λ_{CD4} = 0.78 d^{−1}, λ_{CD8} = 0.58 d^{−1}) and death (δ_{CD4} = 0.23 d^{−1}, δ_{I} = 0.48 d^{−1}, δ_{CD8} = 0.11 d^{−1}), as well as the duration of the adaptation phase (τ = 2.5 days), as determined by our analyses (see Table 1 in the main text).
Considered cell concentrations and simulation structures
To adapt cell motility characteristics and to compare celltocell contacts between simulated and experimental data, we simulated the dynamics using 150 uninfected and infected cells each, resulting in 50% free space as observed in the in vitro experiments. Cells were followed for 1 h with cell positions and celltocell contacts recorded every 30 s, which corresponds to the frame rate used in the experiments. The infection process was neglected for these analyses.
With the obtained parameterization for the motility of infected and uninfected cells, the spread of infection was simulated for a total of 18 days. As a standard concentration, we used a total number of 300 cells comprising 57 (19%) CD8 T cells and 243 (81%) CD4 T cells, with 15 of these cells being infected which corresponds to the conditions in the experiments. According to our previous estimates based on our mathematical model, roughly 10% of the initial CD4 T cells (23 cells) were implemented to be refractory T cells not able to become infected. Experimentally, we observed a maximal fourfold increase of total cell numbers in the collagen cultures. Therefore, the carrying capacity in our simulations given the standard concentration was set to C = 1200 cells. Supplementary Table 2 shows the corresponding cell numbers for the individual cell populations used in the simulations considering 2, 5, or 10fold higher cell concentrations at the beginning. As the maximal fold increase of the total cell population in a culture is regulated by the proliferation capacity of individual cells, the availability of nutrition in the media, as well as the spatial limitations of the culture, we assumed a saturated increase of the carrying capacity for increasing initial cell numbers.
Quantification and statistical analysis
Statistical analysis was performed using GraphPad Prism. Statistical tests used are stated in the figure legends where they appear. Statistical significance of parametrically or not normally distributed datasets was analyzed by Student’s t test or Mann–Whitney U test, respectively. ns: not significant; *pvalue < 0.05; **pvalue < 0.01; ***pvalue < 0.001.
Reporting summary
Further information on research design is available in the Nature Research Reporting Summary linked to this article.
Data availability
The data supporting the findings of this study are available within the article, in supplementary files, and upon reasonable request from the corresponding author.
Code availability
Segmentation was based on a UNet^{59} trained to the specific data set with the original architecture available at https://lmb.informatik.unifreiburg.de/people/ronneber/unet/. The complete code for conservation tracking^{60} including a structured learning workflow is available open source at http://ilastik.org. The ODEmodel and CPM were developed using the open source software R (ref. ^{64}) and Morpheus (ref. ^{66}, https://imc.zih.tudresden.de/wiki/morpheus/), respectively. All aspects concerning the specific protocols and the parameterizations for the mathematical models are defined within the text and Methods (see e.g., Table 1, Supplementary Tables 1 and 2). All individual software codes are available upon reasonable request from the authors.
References
Grivel, J. C. & Margolis, L. Use of human tissue explants to study human infectious agents. Nat. Protoc. 4, 256–269 (2009).
Baker, B. M. & Chen, C. S. Deconstructing the third dimension: how 3D culture microenvironments alter cellular cues. J. Cell Sci. 125, 3015–3024 (2012).
Beltman, J. B., Maree, A. F., Lynch, J. N., Miller, M. J. & de Boer, R. J. Lymph node topology dictates T cell migration behavior. J. Exp. Med. 204, 771–780 (2007).
Jagiella, N., Rickert, D., Theis, F. J. & Hasenauer, J. Parallelization and highperformance computing enables automated statistical inference of multiscale models. Cell Syst. 4, 194–206 e199 (2017).
Altfeld, M. & Gale, M. Jr. Innate immunity against HIV1 infection. Nat. Immunol. 16, 554–562 (2015).
Fackler, O. T., Murooka, T. T., Imle, A. & Mempel, T. R. Adding new dimensions: towards an integrative understanding of HIV1 spread. Nat. Rev. Microbiol. 12, 563–574 (2014).
Sherer, N. M. et al. Retroviruses can establish filopodial bridges for efficient celltocell transmission. Nat. cell Biol. 9, 310–315 (2007).
Sowinski, S. et al. Membrane nanotubes physically connect T cells over long distances presenting a novel route for HIV1 transmission. Nat. Cell Biol. 10, 211–219 (2008).
Sourisseau, M., SolFoulon, N., Porrot, F., Blanchet, F. & Schwartz, O. Inefficient human immunodeficiency virus replication in mobile lymphocytes. J. Virol. 81, 1000–1012 (2007).
Jolly, C., Kashefi, K., Hollinshead, M. & Sattentau, Q. J. HIV1 cell to cell transfer across an Envinduced, actindependent synapse. J. Exp. Med. 199, 283–293 (2004).
Hubner, W. et al. Quantitative 3D video microscopy of HIV transfer across T cell virological synapses. Science 323, 1743–1747 (2009).
Bracq, L., Xie, M., Benichou, S. & Bouchet, J. Mechanisms for celltocell transmission of HIV1. Front Immunol. 9, 260 (2018).
Hatziioannou, T. & Evans, D. T. Animal models for HIV/AIDS research. Nat. Rev. Microbiol. 10, 852–867 (2012).
Munoz, M. A., Biro, M. & Weninger, W. T cell migration in intact lymph nodes in vivo. Curr. Opin. Cell Biol. 30C, 17–24 (2014).
Stolp, B. et al. HIV1 Nef interferes with Tlymphocyte circulation through confined environments in vivo. Proc. Natl Acad. Sci. USA 109, 18541–18546 (2012).
Stolp, B. et al. HIV1 Nef interferes with host cell motility by deregulation of Cofilin. Cell Host Microbe 6, 174–186 (2009).
Murooka, T. T. et al. HIVinfected T cells are migratory vehicles for viral dissemination. Nature 490, 283–287 (2012).
Real, F., Sennepin, A., Ganor, Y., Schmitt, A. & Bomsel, M. Live imaging of HIV1 transfer across T cell virological synapse to epithelial cells that promotes stromal macrophage infection. Cell Rep. 23, 1794–1805 (2018).
Gelse, K., Poschl, E. & Aigner, T. Collagens—structure, function, and biosynthesis. Adv. Drug Deliv. Rev. 55, 1531–1546 (2003).
Gunzer, M. et al. Antigen presentation in extracellular matrix: interactions of T cells with dendritic cells are dynamic, short lived, and sequential. Immunity 13, 323–332 (2000).
Moalli, F. et al. The Rho regulator Myosin IXb enables nonlymphoid tissue seeding of protective CD8(+) T cells. J. Exp. Med. 215, 1869–1890 (2018).
Friedl, P. & Brocker, E. B. Reconstructing leukocyte migration in 3D extracellular matrix by timelapse videomicroscopy and computerassisted tracking. Methods Mol. Biol. 239, 77–90 (2004).
Artym, V. V. & Matsumoto, K. Imaging cells in threedimensional collagen matrix. Curr. Protoc. Cell Biol. 10, 11–20 (2010).
Friedl, P., Noble, P. B. & Zanker, K. S. T lymphocyte locomotion in a threedimensional collagen matrix. Expr. Funct. Cell Adhes. Mol. J. Immunol. 154, 4973–4985 (1995).
Carlson, M. A., Smith, L. M., Cordes, C. M., Chao, J. & Eudy, J. D. Attachmentregulated signaling networks in the fibroblastpopulated 3D collagen matrix. Sci. Rep. 3, 1880 (2013).
Mudd, J. C. & Lederman, M. M. CD8 T cell persistence in treated HIV infection. Curr. Opin. HIV AIDS 9, 500–505 (2014).
Cao, W., Mehraj, V., Kaufmann, D. E., Li, T. & Routy, J. P. Elevation and persistence of CD8 Tcells in HIV infection: the Achilles heel in the ART era. J. Int. AIDS Soc. 19, 20697 (2016).
Ritter, C. et al. Twofilter probabilistic data association for tracking of virus particles in fluorescence microscopy images. In Proc. IEEE Internat. Symposium on Biomedical Imaging 957–960 (IEEE, Piscataway, NJ, 2018).
Drazer, G. & Zanette, D. H. Experimental evidence of powerlaw trappingtime distributions in porous media. Phys. Rev. E Stat. Phys. Plasmas Fluids Relat. Inter. Top. 60, 5858–5864 (1999).
Iwami, S. et al. Celltocell infection by HIV contributes over half of virus infection. Elife 4, https://doi.org/10.7554/eLife.08150 (2015).
Egen, J. G. et al. Intravital imaging reveals limited antigen presentation and T cell effector function in mycobacterial granulomas. Immunity 34, 807–819 (2011).
Gebhardt, T. et al. Different patterns of peripheral migration by memory CD4+ and CD8+ T cells. Nature 477, 216–219 (2011).
Perelson, A. S. Modelling viral and immune system dynamics. Nat. Rev. Immunol. 2, 28–36 (2002).
Zhang, C. et al. Hybrid spreading mechanisms and T cell activation shape the dynamics of HIV1 infection. PLoS Comput. Biol. 11, e1004179 (2015).
Law, K. M. et al. In vivo HIV1 celltocell transmission promotes multicopy microcompartmentalized infection. Cell Rep., https://doi.org/10.1016/j.celrep.2016.05.059 (2016).
Graner, F. & Glazier, J. A. Simulation of biological cell sorting using a twodimensional extended Potts model. Phys. Rev. Lett. 69, 2013–2016 (1992).
Stieh, D. J. et al. Vaginal challenge with an SIVbased dual reporter system reveals that infection can occur throughout the upper and lower female reproductive tract. PLoS Pathog. 10, e1004440 (2014).
de Vries, R. D. et al. In vivo tropism of attenuated and pathogenic measles virus expressing green fluorescent protein in macaques. J. Virol. 84, 4714–4724 (2010).
Kannian, P. et al. Distinct transformation tropism exhibited by human T lymphotropic virus type 1 (HTLV1) and HTLV2 is the result of postinfection T cell clonal expansion. J. Virol. 86, 3757–3766 (2012).
Silveira, G. F. et al. Human T lymphocytes are permissive for dengue virus replication. J. Virol. 92, e02181–17 (2018).
Yu, Q., Hu, N. & Ostrowski, M. Poxvirus tropism for primary human leukocytes and hematopoietic cells. Methods Mol. Biol. 515, 309–328 (2009).
Chen, Q., Pang, M. H., Ye, X. H., Yang, G. & Lin, C. The Toxoplasma gondii ME49 strain upregulates levels of A20 that inhibit NFκB activation and promotes apoptosis in human leukaemia Tcell lines. Parasit. Vectors 11, 305 (2018).
Sewald, X. et al. Retroviruses use CD169mediated transinfection of permissive lymphocytes to establish infection. Science 350, 563–567 (2015).
Nemerow, G. R. & Cooper, N. R. Early events in the infection of human B lymphocytes by EpsteinBarr virus: the internalization process. Virology 132, 186–198 (1984).
Kuehl, C. J., Dragoi, A. M., Talman, A. & Agaisse, H. Bacterial spread from cell to cell: beyond actinbased motility. Trends Microbiol. 23, 558–566 (2015).
Cheng, J. et al. Human matrix metalloproteinase8 gene delivery increases the oncolytic activity of a replicating adenovirus. Mol. Ther. 15, 1982–1990 (2007).
Moir, S. & Fauci, A. S. B cells in HIV infection and disease. Nat. Rev. Immunol. 9, 235–245 (2009).
Martin, N. et al. Virological synapsemediated spread of human immunodeficiency virus type 1 between T cells is sensitive to entry inhibition. J. Virol. 84, 3516–3527 (2010).
Dustin, M. L. Cell adhesion molecules and actin cytoskeleton at immune synapses and kinapses. Curr. Opin. Cell Biol. 19, 529–533 (2007).
Moreau, H. D. et al. Dynamic in situ cytometry uncovers T cell receptor signaling during immunological synapses and kinapses in vivo. Immunity 37, 351–363 (2012).
Wei, X. et al. Emergence of resistant human immunodeficiency virus type 1 in patients receiving fusion inhibitor (T20) monotherapy. Antimicrob. Agents Chemother. 46, 1896–1905 (2002).
Schindler, M. et al. Nefmediated suppression of T cell activation was lost in a lentiviral lineage that gave rise to HIV1. Cell 125, 1055–1067 (2006).
Trautz, B. et al. The hostcell restriction factor SERINC5 restricts HIV1 infectivity without altering the lipid composition and organization of viral particles. J. Biol. Chem. 292, 13702–13713 (2017).
Lampe, M. et al. Doublelabelled HIV1 particles for study of viruscell interaction. Virology 360, 92–104 (2007).
Godinez, W. J. & Rohr, K. Tracking multiple particles in fluorescence timelapse microscopy images via probabilistic data association. IEEE Trans. Med. Imaging 34, 415–432 (2015).
Saxton, M. J. Singleparticle tracking: the distribution of diffusion coefficients. Biophys. J. 72, 1744–1753 (1997).
Bacher, C. P., Reichenzeller, M., Athale, C., Herrmann, H. & Eils, R. 4D single particle tracking of synthetic and proteinaceous microspheres reveals preferential movement of nuclear particles along chromatin—poor tracks. BMC Cell Biol. 5, 45 (2004).
Haubold, C. et al. Segmenting and Tracking multiple dividing targets using ilastik. Adv. Anat. Embryol. Cell Biol. 219, 199–229 (2016).
Ronneberger, O., Fischer, P. & Brox, T. Unet: convolutional networks for biomedical image segmentation. Navab N., Hornegger J., Wells W., Frangi A (eds.). In International Conference on Medical Image Computing and Computerassisted Intervention 234–241 (Springer, Cham, 2015).
Schiegg, M., Hanslovsky, P., Kausler, B. X., Hufnagel, L. & Hamprecht, F. A. Conservation Tracking. In IEEE International Conference on Computer Vision, 2928–2935 (IEEE Xplore Digital Library, New York, NY, 2013).
Wolff, C. et al. Multiview lightsheet imaging and tracking with the MaMuT software reveals the cell lineage of a direct developing arthropod limb. Elife 7, https://doi.org/10.7554/eLife.34410 (2018).
Friedl, P. & Weigelin, B. Interstitial leukocyte migration and immune function. Nat. Immunol. 9, 960–969 (2008).
Iwami, S. et al. Quantification system for the viral dynamics of a highly pathogenic simian/human immunodeficiency virus based on an in vitro experiment and a mathematical model. Retrovirology 9, 18 (2012).
Team, R. C. R: A language and environment for statistical computing. https://www.Rproject.org/ (2016).
Raue, A. et al. Structural and practical identifiability analysis of partially observed dynamical models by exploiting the profile likelihood. Bioinformatics 25, 1923–1929 (2009).
Starruss, J., de Back, W., Brusch, L. & Deutsch, A. Morpheus: a userfriendly modeling environment for multiscale and multicellular systems biology. Bioinformatics 30, 1331–1332 (2014).
Maree, A. F., Grieneisen, V. A. & EdelsteinKeshet, L. How cells integrate complex stimuli: the effect of feedback from phosphoinositides and cell shape on cell polarization and motility. PLoS Comput Biol. 8, e1002402 (2012).
Glazier, J. A. & Graner, F. Simulation of the differential adhesion driven rearrangement of biological cells. Phys. Rev. E Stat. Phys. Plasmas Fluids Relat. Inter. Top. 47, 2128–2154 (1993).
Merks, R. M., Brodsky, S. V., Goligorksy, M. S., Newman, S. A. & Glazier, J. A. Cell elongation is key to in silico replication of in vitro vasculogenesis and subsequent remodeling. Dev. Biol. 289, 44–54 (2006).
Klinger, E., Rickert, D. & Hasenauer, J. pyABC: distributed, likelihoodfree inference. Bioinformatics 34, 3591–3593 (2018).
Acknowledgements
We thank Friedrich Frischknecht, Oliver Keppler, and Alessia Ruggieri for discussion and comments on the manuscript, and Nadine Tibroni, Emmanuel Klinger and Jan Hasenauer for expert technical help. This project was funded by the Deutsche Forschungsgemeinschaft (DFG, Projektnummer 240245660SFB1129: project 8 to O.T.F., project 4 to U.S.S.; project Z4 to F.H. and K.R., and project 6 to B.M.). P.K., J.F., P.C.B., and F.G. were supported by BIOMS. F.G. is additionally supported by the Chica and Heinz Schaller Foundation. For highperformance computational analyses the authors acknowledge support by the state of BadenWürttemberg through bwHPC. O.T.F., U.S., F.H., K.R. and B.M are members of the cluster of excellence CellNetworks.
Author information
Authors and Affiliations
Contributions
Designed the study: O.T.F. and A.I.; supervised the project: O.T.F., F.G., and U.S.S.; conducted experiments: A.I.; analyzed data: A.I., O.T.F., P.K., N.S., J.F., and F.G.; developed and applied image tracking and segmentation: J.A., P.S., and F.H.; analyzed cell motility and contact data: N.D.S. and U.S.S.; developed the mathematical and computational models: P.K., J.F., P.C.B., F.G., N.D.S., and U.S.S.; performed the mathematical analyses: P.K., J.F., and F.G.; interpreted data: O.T.F., A.I., and F.G.; developed and performed virus particle tracking and motility analysis: C.R., W.J.G., and K.R.; provided essential reagents and expertize: B.M.; wrote the manuscript: O.T.F., A.I., F.G., P.K., and N.D.S.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Journal peer review information: Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Imle, A., Kumberger, P., Schnellbächer, N.D. et al. Experimental and computational analyses reveal that environmental restrictions shape HIV1 spread in 3D cultures. Nat Commun 10, 2144 (2019). https://doi.org/10.1038/s41467019098793
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467019098793
This article is cited by

Unsupervised discovery of tissue architecture in multiplexed imaging
Nature Methods (2022)

High resolution microfluidic assay and probabilistic modeling reveal cooperation between T cells in tumor killing
Nature Communications (2022)

Decellularized extracellular matrix mediates tissue construction and regeneration
Frontiers of Medicine (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.