Holographic displays can provide a 3D visual experience to multiple users without requiring special glasses. By precisely tailoring light fields, holographic displays could resemble realistic 3D scenes with full motion parallax and continuous depth cues. However, available holographic displays are unable to generate such scenes given practical limitations in wavefront modulation. In fact, the limited diffraction angle and small number of pixels of current wavefront modulators derive into a 3D scene with small size and narrow viewing angle. We propose a flat-panel wavefront modulator capable of displaying large dynamic holographic images with wide viewing angle. Specifically, an ultrahigh-capacity non-periodic photon sieve, which diffracts light at wide angles, is combined with an off-the-shelf liquid crystal display panel to generate holographic images. Besides wide viewing angle and large screen size, the wavefront modulator provides multi-colour projection and a small form factor, which suggests the possible implementation of holographic displays on thin devices.
Holographic displays capable of generating arbitrary wavefronts can be considered as the ultimate 3D visualization technology. In fact, wavefronts, which are 2D maps of spatial phase distribution, can encode directional information of light fields, and their controlled convergence and divergence during propagation generate 3D scenes. Unlike 2D image-based stereoscopic displays, which reportedly cause headache, eyestrain, visual discomfort, and fatigue to users given vergence–accommodation conflicts1, holographic displays are comfortable for the user and provide realistic 3D scenes with full motion parallax and continuous depth cues2,3,4. Commonly used approaches for 3D visualization are volumetric displays, which have components distributed in a volume to scatter light in every direction and thus create realistic 3D scenes5,6. However, the required volume for such displays makes them cumbersome and thus limits their applicability. In contrast, 3D images from holographic displays are generated using a 2D surface by exploiting the wave nature of light.
Ideal holographic displays can precisely tailor wavefronts beyond the human perception, and therefore resemble 3D scenes that are indistinguishable from real objects. However, current wavefront modulators, such as spatial light modulators (SLMs), cannot handle the large-optical modes required for generating realistic 3D scenes. Unlike real objects, whose light scatters in every direction and can thus be observed from any perspective, the viewing (i.e., twice of diffraction) angle of a 3D scene generated using the available SLMs is limited to few degrees, specifically, θ = 2sin−1(λ/2p), where λ is the wavelength of light and p is the pixel pitch of the display. Additional magnification lenses may increase the viewing angle with a trade-off on the scene size. In practice, the space–bandwidth product (SBP), which is a measure to determine the size and viewing angle of holographic images, is fundamentally limited by the number of addressable optical modes (i.e., pixels) when using SLMs7.
Spatial8,9,10,11 or temporal12,13,14 multiplexing of SLMs notably increases the controllability of light fields to generate realistic 3D scenes. However, the large computational cost and transportation burden of holographic data restricts real-time operation. In addition, the resulting bulky and complex systems hinder commercialisation. On the other hand, eye-tracking15 and head-mount16 holographic displays restrict the viewing zones to provide improved 3D scenes, but they cannot be used for multi-user platforms. Furthermore, rewritable photopolymers17,18 and reprogrammable metasurfaces19 address a large number of optical modes with high-spatial density, but compromising the dynamic modulation capabilities given time-consuming refreshing processes. To date, no wavefront modulator allows displaying 3D dynamic holograms with wide viewing angle and large image size to multiple users.
Unlike previous developments, we propose a flat-panel wavefront modulator for generating 3D dynamic holographic images endowed with large-area and wide viewing angle. The key idea is the use of an ultrahigh-capacity non-periodic photon sieve consisting of randomly oriented small pinholes. By placing the photon sieve close to a transmissive liquid crystal display (LCD) panel, the diffraction angle of a light field can be considerably enhanced (Fig. 1). In addition, a one-to-one linear relation between pinholes and pixels of the LCD panel allows full independent modulation of the light field scattered from each pinhole to generate the dynamic holographic images. Furthermore, the proposed technique maintains the small form factor of the LCD panel. Likewise, dynamic colour images are rendered using a single modulator and without requiring colour filters.
Non-periodic photon sieve
The proposed wavefront modulator confines the active area of each LCD pixel through pinholes of the photon sieve (Fig. 2a–c). The pinholes diffract the light fields at wide angles20,21, thus increasing the viewing angle of the holographic images. We designed the photon sieve such that its pinholes show a one-to-one correspondence with the pixels; only one pinhole is positioned on the active area of each LCD pixel, and the total number of pinholes are same as the pixel numbers in LCD panel (Fig. 2a). The probability distribution of the lateral (x–y plane) displacement of the pinhole position from the centre position of the LCD pixel is a continuous uniform distribution. The optical field scattered from each pinhole is independently modulated by each LCD pixel and render dynamic holographic images.
The operation of the proposed system relies on the randomness of the linear optical transformation induced by the non-periodicity of the pinholes. In practice, if pinholes are periodically aligned, reconstructed holograms can only carry optical information within the Nyquist frequency defined by the pixel pitches. As a result, spatial aliasing artefacts occur; unwanted multiple cloned images are generated. In contrast, pseudo-randomly oriented pinholes suppress the duplication of the holographic images within the diffraction angle defined by the pinhole size, but at the expense of background noises (see Supplementary Figure 1 and Supplementary Note 1).
Importantly, the positions and shapes of the pinholes in the photon sieve are completely known and do not change over time, and the light transport through the LCD panel and the photon sieve occurs in a deterministic manner. Furthermore, because each pinhole is located within the area of each corresponding LCD pixel, the present method does not require complex time-consuming calibration and calculation associated with an optical transmission matrix22,23.
We should note that our methodology is fundamentally different from previously reported photon sieve based optical holograms. The previous methods have tailored the sizes and distributions of the pinholes for generating static holograms24,25 with given design principles. In contrast, we tailor the light field incident on the pinholes to generate dynamic holograms while the lateral positions of the pinholes are designed in a pseudo-random manner. This pseudo-random optical transformation by the pinholes enables to manipulate holograms with a large degree of freedom.
To verify the generation of holographic images with a wide viewing angle, we first measured a light field scattered from the photon sieve, which was fabricated using a conventional photolithography process (see Methods). The size of the pinholes in the photon sieve is 2.2 μm (Fig. 2c). When the photon sieve is close to the LCD panel (1.8 inches diagonal, 1024 × 768 pixels) and illuminated by a collimated green laser beam (λ = 532 nm), a random speckle pattern is generated (Fig. 2d). As shown in Fig. 2e, the speckle pattern contains high-spatial-frequency components capable of providing wide viewing angles to the holographic images.
Next, we verified the dynamic focusing at arbitrary positions, as illustrated in Fig. 2f. An optimal pattern is displayed on the LCD panel to produce the optical focus at the desired position. We determined the phase values, which match the optical path lengths of the light fields scattered from the pinholes to the desired focal position, by simple algebraic calculations (see Methods). The resulting bias values corresponding to the phase values of the patterns were displayed on the LCD panel. In practice, the LCD panel is neither amplitude- nor phase-only modulator. The randomness of the photon sieve scrambles the optical properties of the propagating light fields and allows the conventional LCD panel to be used as an efficient wavefront modulator upon precise calibration (Supplementary Figure 2). By using a 4-f telescopic imaging system with a high numerical aperture (NA = 0.75), we observed the tight optical focus as shown in Fig. 2g and Fig. 2h.
To examine an effective viewing angle of the proposed system, we measured the size of the optical focus. For a given diffraction-limited imaging system with a circular aperture, a shape of an optical focus follows an Airy pattern. A full-width at half-maximum (FWHM) value of the pattern is directly related to the NA (or viewing angle) of the imaging system as FWHM = 0.51λ/NA. Along the axial direction, FWHM values of the foci at 1, 2, 3 cm from the screen were measured as 1.0 μm. The corresponding viewing angle is approximately 30° (Fig. 2g). However, when the distance between the screen and the focus increases over a certain distance (Z1,2 in the Fig. 1), the effective viewing angle decreases inversely proportional to the distance since the supported spatial frequency range is limited by the geometry rather than diffraction angles of the pinholes. Similarly, the radial position of the focus imposes asymmetry in the addressable spatial frequency ranges for the radial directions, thus changes the shape and size of the focus6. Also, the non-uniform diffraction of the laser beam through the pinholes also may decrease the effective viewing angles.
It is worth noting that unlike the previous research on wavefront shaping techniques that consider disordered systems22,26,27,28,29,30, we used a deterministically generated pseudo-random mask to exploit randomness without requiring a time-consuming calibration process31. Furthermore, the absence of relaying optics between the pinholes and the LCD panel results in minor aberrations, induced by the LCD panel and the glass substrate of the metal mask, and should be calibrated only once for optimal performance. Although the holographic images were formed in a large-optical-mode space (>109), the complexity of the linear optical transformation, i.e., the number of non-zero entries of the transmission matrix of the photon sieve, is equal to the number of pixels on the LCD panel (~106). Thus, the calculation of the optimal pattern for focusing requires only O(~106) rather than O(>109) computations.
Holographic image generation
To confirm the 3D nature of the holographic images, we generated and captured a helix hologram consisting of 75 points at different viewing angles (Fig. 3). The helix was positioned 4.2 cm behind the photon sieve, which consists of 2.2 μm sized pinholes. For this experiment, we mounted the 4-f telescopic imaging system (NA = 0.16) on a movable stage to observe the motion parallax of the hologram. Figure 3b clearly shows that the images of the hologram vary according to the observation angle, and the experimental results are consistent with those from simulations. Although the actual viewing angle was measured as 30°, the holographic images can be observed at higher angles because our imaging system has a non-zero numerical aperture. It is worth noting that we achieved a wide viewing angle of about 30° using a single flat-panel wavefront modulator without additional optics. By using the smaller sized pinholes, the viewing angle can be further enhanced (Supplementary Figure 3; Supplementary Figure 4).
To demonstrate the projection of holographic images on a large volume, we increased the size of the helix to the centimetre scale (Fig. 3c). The diameter of the helix varies along the axial direction, and the helix has maximum diameter and length of 0.5 cm and 5 cm, respectively (Fig. 3d). We captured the 2D projections of the hologram by placing a camera without lenses at each depth plane and observed the corresponding images. In Fig. 3d, the blurred images of out-of-plane foci are also shown. In practice, although the large screen size and the wide diffraction angles were confirmed, the actual viewing angles of holographic images are restricted by its displaying geometries. The holographic images must be lie between the observers’ eyes and the scattering surface (the photon sieve) since the light is emitted from the displaying screen rather than the virtual objects32.
A contrast factor, defined as the ratio between the intensity of the holographic image and the average value of the background noise, is directly proportional to the number of controlled optical modes in our system. By using all the pixels in the XGA resolution (1024 × 768 pixels) of the LCD panel, we achieved a factor of approximately 2.0 × 105 (Supplementary Figure 5), thus notably outperforming previous works on wavefront shaping through disordered systems33,34. Although this value, to the best of our knowledge, is the highest ever reported, still insufficient to generate complex holographic images. When a large number of optical modes (or optical foci) are addressed simultaneously, the signal is redistributed into the optical modes. In that case, the signal level decreases in proportion to the number of the optical modes while the background noise remains the same. In order to maintain the high visibility of the holographic images, either the signal must be sparse or to utilise a large number of controlled optical modes (pixel numbers).
In Table 1, the performance of the LCD panel integrated with the photon sieve for displaying holographic images in terms of the screen size and diffraction angle is compared with commercially available SLMs and our previous research on a 3D display26. The values of the proposed system in Table 1 are achieved using a non-periodic photon sieve of 2.2 μm sized pinholes. In our demonstration, the product value of the screen size and diffraction angle was enhanced over a factor of ~1200 compared to the use of only a wavefront modulator with XGA resolution while the holographic image generated from our display attain the same SBP (or complexity) value (see Discussion).
We also verified the generation of dynamic colour holograms using a single wavefront modulator by presenting a rotating cube with three colours, as shown in Fig. 4. Red (λ = 639 nm), green (λ = 532 nm), and blue (λ = 473 nm) laser beams illuminated the LCD panel simultaneously, and the optimal patterns were displayed to generate coloured foci at different spatial positions. The optical transformations of the photon sieve are spectrally uncorrelated for the given wavelengths. Therefore, the colour images were projected simultaneously using the modulator resembling space-division multiplexing such that no colour filter was required35 (see Methods).
Varying pinhole size and number of pinholes per LCD pixel
Because the active area of the LCD pixel is confined by the size of the pinholes, the photon sieves are suffered from low light efficiency. In our demonstration, the light transmittance through the photon sieve, which consists of 2.2 μm sized pinholes, was measured as 0.16%. To mitigate the issue, we demonstrated the proof of concept experiments with the photon sieves consisting of either large-sized pinholes or larger number of pinholes.
As shown in Fig. 5a, the transmittance of the proposed method is readily adjustable upon demand by compromising the viewing angles. We should note that although the increased transmittance was achieved in trade relations between diffraction angles. Still, the photon sieves notably increase the viewing angle of the transmissive LCD, which was originally 0.8 degree. Compared to the use of reflective SLMs, it is more challenging to narrow down the pixel pitch of the transmissive SLMs because of the embedded electrodes and required optical pathlengths of rotating birefringent molecules. Until now these technical hurdles obstruct the realization of flat-panel holographic displays with large viewing angles. The larger the number of pinholes, the higher the transmittance (Fig. 5b). However, the calculation burden also increases linearly with the number of pinholes. Nevertheless, we successfully demonstrated the generation of holographic images, a tetrahedron consisting of 60 foci, with a total of 7.8 million pinholes (Fig. 5d). The holographic image converges and diverges rapidly. The shape highly depends on the observing planes, which reflect the nature of the large diffraction angle of the holographic display.
Although the demonstrated holographic imaging with a wide viewing angle in a large-area surpasses the capability of the conventional wavefront modulators, these results do not violate the Nyquist–Shannon sampling theorem. Instead, the optical signal (i.e., holographic image) containing N optical modes, which correspond to the number of pixels on the LCD panel, is pseudo-randomly redistributed into a larger optical mode space in a deterministic way at the expense of background noises. Given the one-to-one linear relation between pixels and pinholes, the rank, which is the number of linearly independent columns of the optical transmission matrix of a photon sieve, is N. Therefore, the 3D holographic images generated using the photon sieve can be fully decomposed into N orthogonal optical modes (samples) regardless of the wide viewing angle and large displaying area.
We note that a product of a total size of the screen and the diffraction angle in the holographic display is not necessarily same as the SBP (or information capacity) of the optical signal generated from it. The SBP is considered as one of the most important metrics for evaluating the quality of holographic displays and previously often regarded as the product value of the image sizes and viewing angles. However, the SBP is defined as the product of the spatial size and frequency range within which the signal is non-zero. When an optical field is scattered by the pinholes, the non-zero area of the optical field is confined to small by the pinholes. However, the total screen size remains same. At the same time, the small size of the pinholes broaden the spatial frequency ranges. Therefore, the resultant holographic image can exhibit a large-size with a wide viewing angle, but possess a small SBP value at the same time.
Our demonstrations indicate that if a holographic image is sparse, it can be displayed with high fidelity by a pseudo-random optical projection even if the image is projected on a large-optical-mode space. In practice, the random projection methods in imaging systems have actively been researched in the field of the compressed sensing36,37 because sparse signals can be dealt with a small number of sampling measurements with prior knowledge or assumptions. However, little has been reported for displaying purpose since the inherent noises in the displaying signals induced by the randomness cannot be removed without additional filtering or processing. Nevertheless, we believe that this random projection approach suggests a very promising way in displaying sparse signals with a limited number of controllable degrees of freedom, especially for holographic display applications where the amount of holographic information usually exceeds the modulation capabilities of the current electronic devices.
Although promising, the proposed system shows practical limitations such as low power efficiency and incomplete non-periodicity. In fact, the photon sieve blocks most of the light field, thus requiring the high-power laser to keep the visibility of holographic images. Likewise, the marginal periodicity of the pinholes caused by the limited fill factor of available LCD panels might generate cloned images of relatively low intensity. These limitations could be mitigated by using other advanced disorder-manipulated systems such as micro-sized gratings with varying pitch and orientation, micro-lens arrays with spatially varying shapes, and combinations of them with photon sieves.
In conclusion, we present a proof-of-concept for a flat-panel wavefront modulator to generate large-size wide-viewing-angle dynamic 3D holographic images. An easily manufactured non-periodic photon sieve is combined with a commercial LCD panel to generate the images with arbitrary viewing angle and image size while maintaining the LCD small form factor. Our technique can be easily integrated into the current LCD production process and is a promising approach towards thin holographic displays. The proposed programmable randomly distributed system is not only limited to holographic displays but also enables versatile light field control.
We used a 1.8-inch transmissive LCD panel (LCX017AL, Sony Co., Tokyo, Japan) with XGA resolution of 1024 × 768 pixels to modulate the incident wavefront of a coherent laser beam (Fig. 2a) at a maximum modulation speed of 60 Hz, which was limited by the LCD panel. By using a double-slit interferometer, the optical response of the LCD panel was precisely measured according to the applied bias (Supplementary Figure 3). We selected the polariser and analyser orientations which maximize the phase delay induced by the LCD panel (the maximum achievable phase delay using the LCD panel at λ = 532 nm is 1.57 π).
We mounted the LCD panel on a custom-made holder and precisely aligned the photon sieve to be in physical contact with the panel. Four square-shaped markers were patterned at the four corners of the photon sieve and were utilised for initial alignment. Then, we placed a charge-coupled device (CCD) camera (Lt365R, Lumenera Co., Ottawa, Canada) 20 cm behind the photon sieve and updated a pattern, which focuses the beam on the CCD, on the LCD panel. We precisely adjusted the translational positions of the photon sieve that maximise the intensity value detected at the CCD.
To compensate the aberration induced by the LCD panel itself and the glass substrate of the photon sieve, we applied a correction pattern to the panel. The correction pattern was formed by successively adding the Zernike polynomials of up to order of 21st (Zj, j = 2… 21). The Zernike coefficients of the pattern were obtained by maximising the intensity of the focus through an iteration-based feedback loop.
In order to determine the phase map that generates foci at desired focal positions, we algebraically calculate the phase values which match the optical path length of the light fields scattered from the pinholes. The optical path lengths of light fields scattered from the pinholes to the desired focal positions are given as:
where (xl,yl,zl) and (xm,ym,Zm) are the position of the lth pinholes and the mth focal positions, respectively. The corresponding phase values to be applied to the pixels of the LCD panel were found by taking the argument of linear summation of the optical field values.
where am is the relative amplitude of the focus.
We used a green laser (λ = 532 nm; LSS-0532, Laserglow Technologies, Toronto, Canada) for all the experiments, except for that of the coloured holographic images (Fig. 4), which also included red (λ = 639 nm; MLL-FN-639, CNI Optoelectronics Tech. Co., Ltd., Changchun, China) and blue (λ = 473 nm; MSL-FN-473, CNI Optoelectronics Tech. Co., Ltd., Changchun, China) lasers. The laser beams were combined by using dichroic mirrors (DMLP505, DMLP550, Thorlabs Inc., NJ, USA) to simultaneously illuminate the LCD panel. Moreover, the optical response of the LCD panel at each wavelength was precisely calibrated. To render the colour images using a single LCD panel, we adopted space-division multiplexing. Specifically, the pixels on the LCD panel were randomly and evenly assigned to three groups, which correspond to the red, green, and blue laser beams. Then, the wavefronts from each group were independently modulated to generate the three-colour holographic images.
Fabrication of non-periodic photon sieve
To fabricate the photon sieve, a Ti thin film of 300 nm was deposited on a fused silica substrate by using an electron-beam evaporator (IPE801, INFOVION Inc., Seoul, Republic of Korea). The photon sieve with 2.2 μm pinholes (Fig. 2c) was fabricated using a conventional i-line photolithography process (NSR-2205i11D, Nikon Co., Tokyo, Japan). Smaller 400 nm pinholes (Fig. 2c) were fabricated using a direct electron-beam writing process (JBL-9300Fs, JEOL Ltd., Tokyo, Japan).
We employed a 4-f telescopic imaging system to capture the images shown in the figures. An objective lens (NA = 0.75; UPlan FLN 40×, Olympus Co., Tokyo, Japan) and a tube lens (f = 100 mm) projected the optical field to a charge-coupled device (Lt365R, Lumenera Co., Ottawa, Canada) to acquire the high-resolution images in Fig. 3. For Fig. 4 and Fig. 5, we used an objective lens with a relatively low numerical aperture (NA = 0.16; UPLSAPO 4×, Olympus Co., Tokyo, Japan) to achieve a large depth of focus. In addition, we mounted the complete 4-f imaging system on a movable stage to capture images from different observation angles and positions.
Codes used for this work are available from the corresponding author upon reasonable request.
The data that support the plots within this paper and other findings of this study are available from the corresponding author upon reasonable request.
Hoffman, D. M., Girshick, A. R., Akeley, K. & Banks, M. S. Vergence–accommodation conflicts hinder visual performance and cause visual fatigue. J. Vis. 8, 33–33 (2008).
Hong, J. et al. Three-dimensional display technologies of recent interest: principles, status, and issues [Invited]. Appl. Opt. 50, H87–H115 (2011).
Yaras, F., Kang, H. & Onural, L. State of the art in holographic displays: a survey. J. Disp. Technol. 6, 443–454 (2010).
Huang, L. et al. Three-dimensional optical holography using a plasmonic metasurface. Nat. Commun. 4, 2808 (2013).
Blundell, B. G. On the uncertain future of the volumetric 3D display paradigm. 3D Res. 8, 11 (2017).
Smalley, D. et al. A photophoretic-trap volumetric display. Nature 553, 486–490 (2018).
Lohmann, A. W., Dorsch, R. G., Mendlovic, D., Ferreira, C. & Zalevsky, Z. Space–bandwidth product of optical signals and systems. J. Opt. Soc. Am. A. 13, 470–473 (1996).
Maeno, K., Fukaya, N., Nishikawa, O., Sato, K. & Honda, T. Electro-holographic display using 15mega pixels LCD. In Practical Holography X. (ed. Benton, S. A.) Proc. SPIE 2562 (International Society for Optics and Photonics, San Jose, 1996).
Hahn, J., Kim, H., Lim, Y., Park, G. & Lee, B. Wide viewing angle dynamic holographic stereogram with a curved array of spatial light modulators. Opt. Express 16, 12372–12386 (2008).
Yaraş, F., Kang, H. & Onural, L. Circular holographic video display system. Opt. Express 19, 9147–9156 (2011).
Kozacki, T., Finke, G., Garbat, P., Zaperty, W. & Kujawińska, M. Wide angle holographic display system with spatiotemporal multiplexing. Opt. Express 20, 27473–27481 (2012).
Sasaki, H., Yamamoto, K., Ichihashi, Y. & Senoh, T. Image size scalable full-parallax coloured three-dimensional video by electronic holography. Sci. Rep. 4, 4000 (2014).
Takaki, Y. & Okada, N. Hologram generation by horizontal scanning of a high-speed spatial light modulator. Appl. Opt. 48, 3255–3260 (2009).
Inoue, T. & Takaki, Y. Table screen 360-degree holographic display using circular viewing-zone scanning. Opt. Express 23, 6533–6542 (2015).
Häussler, R. et al. in Stereoscopic Displays and Applications XX. (eds. Woods, A. J. et al.) Proc. SPIE 7237 (International Society for Optics and Photonics, San Jose, 2009).
Maimone, A., Georgiou, A. & Kollin, J. S. Holographic near-eye displays for virtual and augmented reality. ACM Trans. Graph 36, 85 (2017).
Blanche, P.-A. et al. Holographic three-dimensional telepresence using large-area photorefractive polymer. Nature 468, 80–83 (2010).
Tay, S. et al. An updatable holographic three-dimensional display. Nature 451, 694–698 (2008).
Wang, Q. et al. Optically reconfigurable metasurfaces and photonic devices based on phase change materials. Nat. Photonics 10, 60–65 (2016).
Roberts, A. Electromagnetic theory of diffraction by a circular aperture in a thick, perfectly conducting screen. J. Opt. Soc. Am. A. 4, 1970–1983 (1987).
Genet, C. & Ebbesen, T. Light in tiny holes. Nature 445, 39–46 (2007).
Popoff, S. M. et al. Measuring the transmission matrix in optics: an approach to the study and control of light propagation in disordered media. Phy. Rev. Lett. 104, 100601 (2010).
Yu, H. et al. Measuring large optical transmission matrices of disordered media. Phys. Rev. Lett. 111, 153902 (2013).
Huang, K. et al. Ultrahigh-capacity non-periodic photon sieves operating in visible light. Nat. Commun. 6, 7059 (2015).
Liu, R., Li, F., Padgett, M. & Phillips, D. Generalized photon sieves: fine control of complex fields with simple pinhole arrays. Optica 2, 1028–1036 (2015).
Yu, H., Lee, K., Park, J. & Park, Y. Ultrahigh-definition dynamic 3D holographic display by active control of volume speckle fields. Nat. Photon 11, 186–192 (2017).
Vellekoop, I., Lagendijk, A. & Mosk, A. Exploiting disorder for perfect focusing. Nat. Photon 4, 320–322 (2010).
Mosk, A. P., Lagendijk, A., Lerosey, G. & Fink, M. Controlling waves in space and time for imaging and focusing in complex media. Nat. Photon 6, 283–292 (2012).
Cui, M. & Yang, C. Implementation of a digital optical phase conjugation system and its application to study the robustness of turbidity suppression by phase conjugation. Opt. Express 18, 3444–3455 (2010).
Čižmár, T. & Dholakia, K. Exploiting multimode waveguides for pure fibre-based imaging. Nat. Commun. 3, 1027 (2012).
Jang, M. et al. Wavefront shaping with disorder-engineered metasurfaces. Nat. Photon 12, 84–90 (2018).
Onural, L., Yaras, F. & Kang, H. Digital holographic three-dimensional video displays. Proc. IEEE 99, 576–589 (2011).
Vellekoop, I. M. & Mosk, A. Focusing coherent light through opaque strongly scattering media. Opt. Lett. 32, 2309–2311 (2007).
Yu, H., Lee, K. & Park, Y. Ultrahigh enhancement of light focusing through disordered media controlled by mega-pixel modes. Opt. Express 25, 8036–8047 (2017).
Park, J.-H., Park, C., Yu, H., Cho, Y.-H. & Park, Y. Active spectral filtering through turbid media. Opt. Lett. 37, 3261–3263 (2012).
Candès, E. J., Romberg, J. & Tao, T. Robust uncertainty principles: Exact signal reconstruction from highly incomplete frequency information. IEEE Trans. Inf. Theory 52, 489–509 (2006).
Liutkus, A. et al. Imaging with nature: Compressive imaging using a multiply scattering medium. Sci. Rep. 4, 5552 (2014).
The authors acknowledge Da-Jin Kim in Korea Advanced Institute of Science and Technology for help in photon sieve fabrication process. This work was supported by National Research Foundation of Korea (2017M3C1A3013923, 2015R1A3A2066550, 2018K000396, 2018R1A6A3A01011043), and Samsung Electronics.
The authors declare no competing interests.
Journal peer review information: Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
About this article
Cite this article
Park, J., Lee, K. & Park, Y. Ultrathin wide-angle large-area digital 3D holographic display using a non-periodic photon sieve. Nat Commun 10, 1304 (2019). https://doi.org/10.1038/s41467-019-09126-9