Abstract
Controlling the group velocity of an optical pulse typically requires traversing a material or structure whose dispersion is judiciously crafted. Alternatively, the group velocity can be modified in free space by spatially structuring the beam profile, but the realizable deviation from the speed of light in vacuum is small. Here we demonstrate precise and versatile control over the group velocity of a propagationinvariant optical wave packet in free space through sculpting its spatiotemporal spectrum. By jointly modulating the spatial and temporal degrees of freedom, arbitrary group velocities are unambiguously observed in free space above or below the speed of light in vacuum, whether in the forward direction propagating away from the source or even traveling backwards towards it.
Introduction
The publication of Einstein’s seminal work on special relativity initiated an investigation of the speed of light in materials featuring strong chromatic dispersion^{1}. Indeed, the group velocity v_{g} of an optical pulse in a resonant dispersive medium can deviate significantly from the speed of light in vacuum c, without posing a challenge to relativistic causality when v_{g} > c because the information speed never exceeds c^{1,2}. Modifying the temporal spectrum in this manner is the basic premise for the development of the socalled slow light and fast light^{3} in a variety of material systems including ultracold atoms^{4}, hot atomic vapors^{5,6}, stimulated Brillouin scattering in optical fibers^{7}, and active gain resonances^{8,9}. Additionally, nanofabrication yields photonic systems that deliver similar control over the group velocity through structural dispersion in photonic crystals^{10}, metamaterials^{11}, tunneling junctions^{12}, and nanophotonic structures^{13}. In general, resonant systems have limited spectral bandwidths that can be exploited before pulse distortion obscures the targeted effect, with the pulse typically undergoing absorption, amplification, or temporal reshaping, but without necessarily affecting the field spatial profile.
In addition to temporal spectral modulation, it has been recently appreciated that structuring the spatial profile of a pulsed beam can impact its group velocity in free space^{14,15,16}. In a manner similar to pulse propagation in a waveguide, the spatial spectrum of a structured pulsed beam comprises plane wave contributions tilted with respect to the propagation axis, which undergo larger delays between two planes than purely axially propagating modes. A largearea structured beam (narrow spatial spectrum) can travel for longer distances before beam deformation driven by diffraction and spacetime coupling, but its group velocity deviates only slightly from c; whereas a narrow beam deviates further from c, but travels a shorter distance. Consequently, v_{g} is dependent on the size of the field spatial profile, and the maximum group delay observable is limited by the numerical aperture. Only velocities slightly lower than c (≈0.99999c) have been accessible in the experiments performed to date with maximum observed group delays of ~30fs, corresponding to a shift of ~10 μm over a distance of 1 m (or 1 part in 10^{5}).
Another potential approach to controlling the group velocity of a pulsed beam in free space relies on sculpting the spatiotemporal profile of propagationinvariant wave packets^{17,18}. Instead of manipulating separately the field spatial or temporal degrees of freedom and attempting to minimize unavoidable spacetime coupling, tight spatiotemporal correlations are intentionally introduced into the wave packet spectrum, thereby resulting in the realization of arbitrary group velocities: superluminal, luminal, or subluminal, whether in the forward direction propagating away from the source or in the backward direction traveling toward it. The group velocity here is the speed of the wave packet central spatiotemporal intensity peak, whereas the wave packet energy remains spread over its entire spatiotemporal extent. Judiciously associating each wavelength in the pulse spectrum with a particular transverse spatial frequency traces out a conic section on the surface of the lightcone while maintaining a linear relationship between the axial component of the wave vector and frequency^{19,20}. The slope of this linear relationship dictates the wave packet group velocity, and its linearity eliminates any additional dispersion terms. The resulting wave packets propagate free of diffraction and dispersion^{17,18,19,20,21,22}, which makes them ideal candidates for unambiguously observing group velocities in free space that deviate substantially from c.
There have been previous efforts directed at producing optical wave packets endowed with spatiotemporal correlations. Several strategies have been implemented to date, which include exploiting the techniques associated with the generation of Bessel beams, such as the use of annular apertures in the focal plane of a spherical lens^{23} or axicons^{24,25,26}, synthesis of Xwaves^{27} during nonlinear processes such as secondharmonic generation^{28} or laser filamentation^{29,30}, or through direct filtering of the requisite spatiotemporal spectrum^{31,32}. The reported superluminal speeds achieved with these various approaches in free space have been to date 1.00022c^{25}, 1.00012c^{26}, 1.00015c^{33}, and 1.111c in a plasma^{24}. Reports on measured subluminal speeds have been lacking^{17} and limited to delays of hundreds of femtoseconds over a distance of 10 cm^{34,35}, corresponding to a group velocity of ≈0.999c. There have been no experimental reports to date on negative group velocities in free space.
Here, we synthesize spacetime (ST) wave packets^{20,36,37} using a phaseonly spatial light modulator (SLM) that efficiently sculpts the field spatiotemporal spectrum and modifies the group velocity. The ST wave packets are synthesized for simplicity in the form of a light sheet that extends uniformly in one transverse dimension over ~25 mm, such that control over v_{g} is exercised in a macroscopic volume of space. We measure v_{g} in an interferometric arrangement utilizing a reference pulsed plane wave and confirm precise control over v_{g} from 30c in the forward direction to −4c in the backward direction. We observe group delays of ~±30 ps (three ordersofmagnitude larger than those in refs. ^{14,15}), which is an orderofmagnitude longer than the pulse width, and is observed over a distance of only ~10 mm. Adding to the uniqueness of our approach, the achievable group velocity is independent of the beam size and of the pulse width. All that is needed to change the group velocity is a reorganization of the spectral correlations underlying the wave packet spatiotemporal structure. The novelty of our approach is its reliance on a linear system that utilizes a phaseonly spatiotemporal Fourier synthesis strategy, which is energy efficient and precisely controllable^{20}. Our approach allows for endowing the field with arbitrary, programmable spatiotemporal spectral correlations that can be tuned to produce—smoothly and continuously—any desired wave packet group velocity. The versatility and precision of this technique with respect to previous approaches is attested by the unprecedented range of control over the measured group velocity values over the subluminal, superluminal, and negative regimes in a single optical configuration. Crucially, while distinct theoretical proposals have been made previously for each range of the group velocity (e.g., subluminal^{38,39,40}, superluminal^{41}, and negative^{42} spans), our strategy is—to the best of our knowledge—the only experimental arrangement capable of controlling the group velocity continuously across all these regimes (with no moving parts) simply through the electronic implementation of a phase pattern imparted to a spectrally spread wave front impinging on a SLM.
Results
Concept of spacetime wave packets
The properties of ST light sheets can be best understood by examining their representation in terms of monochromatic plane waves \(e^{i(k_xx + k_zz  \omega t)}\), which are subject to the dispersion relationship \(k_x^2 + k_z^2 = ({\textstyle{\omega \over c}})^2\) in free space; here, k_{x} and k_{z} are the transverse and longitudinal components of the wave vector along the x and z coordinates, respectively, ω is the temporal frequency, and the field is uniform along y. This relationship corresponds geometrically in the spectral space \((k_x,k_z,{\textstyle{\omega \over c}})\) to the surface of the lightcone (Fig. 1). The spatiotemporal spectrum of any physically realizable optical field compatible with causal excitation must lie on the surface of the lightcone with the added restriction k_{z} > 0. For example, the spatial spectra of monochromatic beams lie along the circle at the intersection of the lightcone with a horizontal isofrequency plane, whereas the spatiotemporal spectrum of a traditional pulsed beam occupies a twodimensional (2D) patch on the lightcone surface.
The spectra of ST wave packets do not occupy a 2D patch, but instead lie along a curved onedimensional trajectory resulting from the intersection of the lightcone with a tilted spectral hyperplane \({\cal P}(\theta )\) described by the equation \({\textstyle{\omega \over c}} = k_{\mathrm{o}} + (k_z  k_{\mathrm{o}}){\mathrm{tan}}\theta\), where \(k_{\mathrm{o}} = {\textstyle{{\omega _{\mathrm{o}}} \over c}}\) is a fixed wave number^{20}, and the ST wave packet thus takes the form
Therefore, the group velocity along the zaxis is \(v_{\mathrm{g}} = {\textstyle{{\partial \omega } \over {\partial k_z}}} = c\,{\mathrm{tan}}\,\theta\), and is determined solely by the tilt of the hyperplane \({\cal P}(\theta )\). In the range 0 < θ < 45°, we have a subluminal wave packet v_{g} < c, and \({\cal P}(\theta )\) intersects with the lightcone in an ellipse (Fig. 1a). In the range 45° < θ < 90°, we have a superluminal wave packet v_{g} > c, and \({\cal P}(\theta )\) intersects with the lightcone in a hyperbola (Fig. 1b). Further increasing θ reverses the sign of v_{g} such that the wave packet travels backwards towards the source v_{g} < 0 in the range 90° < θ < 180° (Fig. 1c). These various scenarios are summarized in Fig. 1d.
Experimental realization
We synthesize the ST wave packets by sculpting the spatiotemporal spectrum in the \((k_x,{\textstyle{\omega \over c}})\) plane via a 2D pulse shaper^{20,43}. Starting with a generic pulsed plane wave, the spectrum is spread in space via a diffraction grating before impinging on a SLM, such that each wavelength λ occupies a column of the SLM that imparts a linear phase corresponding to a pair of spatial frequencies ±k_{x} that are to be assigned to that particular wavelength, as illustrated in Fig. 2a; see Methods. The retroreflected wave front returns to the diffraction grating that superposes the wavelengths to reconstitute the pulse and produce the propagationinvariant ST wave packet corresponding to the desired hyperplane \({\cal P}(\theta )\). Using this approach we have synthesized and confirmed the spatiotemporal spectra of 11 different ST wave packets in the range 0° < θ < 180° extending from the subluminal to superluminal regimes. Figure 3a shows the measured spatiotemporal spectral intensity \(\tilde E(k_x,\lambda )^2\) for a ST wave packet having θ = 53.2° and thus lying on a hyperbolic curve on the lightcone corresponding to a positive superluminal group velocity of v_{g} = 1.34c. The spatial bandwidth is Δk_{x} = 0.11 rad/μm, and the the temporal bandwidth is Δλ ≈ 0.3 nm. This spectrum is obtained by carrying out an optical Fourier transform along x to reveal the spatial spectrum. Our spatiotemporal synthesis strategy is distinct from previous approaches that make use of Besselbeamgeneration techniques and similar methodologies^{23,24,25,26,41}, nonlinear processes^{28,29,30}, or spatiotemporal filtering^{31,32}. The latter approach utilizes a diffraction grating to spread the spectrum in space, a Fourier spatial filter then carves out the requisite spatiotemporal spectrum, resulting in either low throughput or high spectral uncertainty. In contrast, our strategy exploits a phaseonly modulation scheme that is thus energyefficient and can smoothly and continuously (within the precision of the SLM) tune the spatiotemporal correlations electronically with no moving parts, resulting in a corresponding controllable variation in the group velocity.
To map out the spatiotemporal profile of the ST wave packet I(x, z, t) = E(x, z, t)^{2}, we make use of the interferometric arrangement illustrated in Fig. 2a. The initial pulsed plane wave (pulse width ~100 fs) is used as a reference and travels along a delay line that contains a spatial filter to ensure a flat wave front (see Methods and Supplementary Fig. 1). Superposing the shorter reference pulse and the synthesized ST wave packet (Eq. 1) produces spatially resolved interference fringes when they overlap in space and time—whose visibility reveals the spatiotemporal pulse profile (Fig. 2a and Supplementary Fig. 2). The measured intensity profile I(x, 0, τ) = E(x, 0, τ)^{2} of the ST wave packet having θ = 53.2° is plotted in Fig. 3b; τ is the delay in the reference arm. Plotted also are the pulse profile at the beam center I(0, 0, τ) = E(x = 0, 0, τ)^{2} whose width is ≈4.2 ps, and the beam profile at the pulse center I(x, 0, 0) = E(x, 0, τ = 0)^{2} whose width is ≈16.8 μm. Previous approaches for mapping out the spatiotemporal profile of propagationinvariant wave packets have made use of strategies ranging from spatially resolved ultrafast pulse measurement techniques^{26,34,35} to selfreferenced interferometry^{31}.
Controlling the group velocity of a spacetime wave packet
We now proceed to make use of this interferometric arrangement to determine v_{g} of the ST wave packets as we vary the spectral tilt angle θ. The setup enables synchronizing the ST wave packet with the luminal reference pulse while also uncovering any dispersion or reshaping in the ST wave packet with propagation. We first synchronize the ST wave packet with the reference pulse and take the central peak of the ST wave packet as the reference point in space and time for the subsequent measurements. An additional propagation distance L_{1} is introduced into the path of the ST wave packet, corresponding to a group delay of τ_{ST} = L_{1}/v_{g}≫Δτ that is sufficient to eliminate any interference. We then determine the requisite distance L_{2} to be inserted into the path of the reference pulse to produce a group delay τ_{r} = L_{2}/c and regain the maximum interference visibility, which signifies that τ_{ST} = τ_{r}. The ratio of the distances L_{1} and L_{2} provides the ratio of the group velocity to the speed of light in vacuum L_{1}/L_{2} = v_{g}/c.
In the subluminal case v_{g} < c, we expect L_{1} < L_{2}; that is, the extra distance introduced into the path of the reference traveling at c is larger than that placed in the path of the slower ST wave packet. In the superluminal case v_{g} > c, we have L_{1} > L_{2} for similar reasons. When considering ST wave packets having negativev_{g}, inserting a delay L_{1} in its path requires reducing the initial length of the reference path by a distance −L_{2} preceding the initial reference point, signifying that the ST wave packet is traveling backwards towards the source. As an illustration, the inset in Fig. 3b plots the same ST wave packet shown in the main panel of Fig. 3b observed after propagating a distance of L_{1} = 10 mm, which highlights the selfsimilarity of its free evolution^{20}. The time axis is shifted by τ_{r} ≈ 24.88 ps, corresponding to v_{g} = (1.36 ± 4 × 10^{−4})c, which is in good agreement with the expected value of v_{g} = 1.34c.
The results of measuring v_{g} while varying θ for the positivev_{g} ST wave packets are plotted in Fig. 4 (see also Supplementary Table 1). The values of v_{g} range from subluminal values of 0.5c to the superluminal values extending up to 32c (corresponding to values of θ in the range 0° < θ < 90°). The case of a luminal ST wave packet corresponds trivially to a pulsed plane wave generated by idling the SLM. The data are in excellent agreement with the theoretical prediction of v_{g} = ctanθ. The measurements of negativev_{g} (90° < θ < 180°) are plotted in Fig. 4, inset, down to v_{g} ≈ −4c, and once again are in excellent agreement with the expectation of v_{g} = ctanθ.
Discussion
An alternative understanding of these results makes use of the fact that tilting the plane \({\cal P}(\theta )\) from an initial position of \({\cal P}(0)\) corresponds to the action of a Lorentz boost associated with an observer moving at a relativistic speed of v_{g} = ctanθ with respect to a monochromatic source (θ = 0)^{21,22,43}. Such an observer perceives in lieu of the diverging monochromatic beam a nondiverging wave packet of group velocity v_{g}^{44}. Indeed, at θ = 90° a condition known as time diffraction is realized where the axial coordinate z is replaced with time t, and the usual axial dynamics is displayed in time instead^{21,43,45,46}. In that regard, our reported results here on controlling v_{g} of ST wave packets is an example of relativistic optical transformations implemented in a laboratory through spatiotemporal spectral engineering.
Note that it is not possible in any finite configuration to achieve a deltafunction correlation between each spatial frequency k_{x} and wavelength λ; instead, there is always a finite spectral uncertainty δλ in this association. In our experiment, δλ ~ 24 pm (Fig. 3a), which sets a limit on the diffractionfree propagation distance over which the modified group velocity can be observed^{36}. The maximum group delay achieved and the propagationinvariant length are essentially dictated by the spectral uncertainty δλ (see ref. ^{36} for details). The finite system aperture ultimately sets the lower bound on the value of δλ. For example, the size of the diffraction grating determines its spectral resolving power, the finite pixel size of the SLM further sets a lower bound on the precision of association between the spatial and temporal frequencies, whereas the size of the SLM active area determines the maximum temporal bandwidth that can be exploited. Of course, the spectral tilt angle θ determines the proportionality between the spatial and temporal bandwidths Δk_{x} and Δλ, respectively, which then links these limits to the transverse beam width. However, ST wave packets having the same spatial transverse width will propagate for different distances depending on the spectral uncertainty associated with each. The confluence of all these factors determine the maximum propagationinvariant distance and hence the maximum achievable group delays. Careful design of the experimental parameters helps extend the propagation distance^{47}, and exploiting a phase plate in lieu of a SLM can extend the propagation distance even further^{48}. Note that we have synthesized here optical wave packets where light has been localized along one transverse dimension but remains extended in the other transverse dimension. Localizing the wave packet along both transverse dimensions would require an additional SLM to extend the spatiotemporal modulation scheme into the second transverse dimension that we have not exploited here.
Finally, another strategy that also relies on spatiotemporal structuring of the optical field has been recently proposed theoretically^{49} and demonstrated experimentally^{50} that makes use of a socalled flying focus, whereupon a chirped pulse is focused with a lens having chromatic aberrations such that different spectral slices traverse the focal volume of the lens at a controllable speed, which was estimated by means of a streak camera.
We have considered here ST wave packets whose spatiotemporal spectral projection onto the \((k_z,{\textstyle{\omega \over c}})\) plane is a line. A plethora of alternative curved projections may be readily implemented to explore different wave packet propagation dynamics and to accommodate the properties of material systems in which the ST wave packet travels. Our results pave the way to novel schemes for phase matching in nonlinear optical processes^{51,52}, new types of laserplasma interactions^{53,54}, and photondressing of electronic quasiparticles^{55}.
Methods
Determining conic sections for the spatiotemporal spectra
The intersection of the lightcone \(k_x^2 + k_z^2 = ({\textstyle{\omega \over c}})^2\) with the spectral hyperplane \({\cal P}(\theta )\) described by the equation \({\textstyle{\omega \over c}} = k_{\mathrm{o}} + (k_z  k_{\mathrm{o}})\,{\mathrm{tan}}\,\theta\) is a conic section: an ellipse (0° < θ < 45° or 135° < θ < 180°), a tangential line (θ = 45°), a hyperbola (45° < θ < 135°), or a parabola (θ = 135°). In all cases v_{g} = ctanθ. The projection onto the \((k_x,{\textstyle{\omega \over c}})\) plane, which the basis for our experimental synthesis procedure, is in all cases a conic section given by
where k_{1}, k_{2}, and k_{3} are positivevalued constants: \({\textstyle{{k_1} \over {k_{\mathrm{o}}}}} = \left {{\textstyle{{{\mathrm{tan}}\theta } \over {1 + {\mathrm{tan}}\theta }}}} \right\), \({\textstyle{{k_2} \over {k_{\mathrm{o}}}}} = {\textstyle{1 \over {1 + {\mathrm{tan}}\theta }}}\), and \({\textstyle{{k_3} \over {k_{\mathrm{o}}}}} = \sqrt {{\textstyle{{1 + {\mathrm{tan}}\theta } \over {1  {\mathrm{tan}}\theta }}}}\). The signs in the equation are (−, +) in the range 0 < θ < 45° (an ellipse), (−,−) in the range 45° < θ < 90°, and (+, −) in the range 90° < θ < 135°.
In the paraxial limit where \(k_x^{{\mathrm{max}}} \ll k_{\mathrm{o}}\), the conic section in the vicinity of k_{x} = 0 can be approximated by a section of a parabola,
whose curvature is determined by θ through the function f(θ) given by
Spatially resolved interference to obtain intensity profiles
We take the ST wave packet to be \(E(x,z,t) = e^{i(k_{\mathrm{o}}z  \omega _{\mathrm{o}}t)}\psi (x,z  v_{\mathrm{g}}t)\) as provided in Eq. (1), and that of the reference plane wave pulse to be \(E_{\mathrm{r}} = e^{i(k_{\mathrm{o}}z  \omega _{\mathrm{o}}t)}\psi _{\mathrm{r}}(z  ct)\). We have dropped the xdependence of the reference and ψ_{r}(z) is a slowly varying envelope. Superposing the two fields in the interferometer after delaying the reference by τ results in a new field ∝E(x, z, t) + E_{r}(x, z, t − τ), whose timeaverage I(x, τ) is recorded at the output,
We make use of the following representations of the fields for the ST wave packet and the reference pulse:
We set the plane of the detector at z = 0 (CCD_{1} in our experiment; see Supplementary Fig. 1), from which we obtain the spatiotemporal interferogram
where
where we have made the simplifying assumption that the spatial spectrum of the ST wave packet is an even function, \(\tilde \psi (k_x) = \tilde \psi (  k_x)\). This assumption is applicable to our experiment and does not result in any loss of generality. Note that I_{ST}(x) corresponds to the timeaveraged transverse spatial intensity profile of the ST wave packet, as would be registered by a chargecoupled device (CCD), for example, in the absence of an interferometer. Similarly, I_{r} is equal to the timeaveraged reference pulse and represents constant background term. Note that z could be set at an arbitrary value because both the reference pulse and the ST wave packet are propagation invariant.
The crosscorrelation function \(R(x,\tau ) = R(x,\tau )e^{i\varphi _{\mathrm{R}}(x,\tau )}\) is given by
Taking the integral over time t produces
where ω is no longer an independent variable, but is correlate to the spatial frequency k_{x} through the spatiotemporal curve at the intersection of the lightcone with the hyperspectral plane \({\cal P}(\theta )\). Because the reference pulse is significantly shorter that the ST wave packet, the spectral width of \(\tilde \psi _{\mathrm{r}}\) is larger than that of \(\tilde \psi\), so that one can ignore it, while retaining its amplitude,
Note that the spectral function \(\tilde \psi (k_x)\) of the ST wave packet determines the coherence length of the observed spatiotemporal interferogram, which we thus expect to be on the order of the temporal width of the ST wave packet itself.
The visibility of the spatially resolved interference fringes (Supplementary Fig. 2) is given by
The squared visibility is then given by
where the last approximation requires that we can ignore I_{ST}(x) with respect to the constant background term I_{r} stemming from the reference pulse.
Synthesis of ST wave packets
The input pulsed plane wave is produced by expanding the horizontally polarized pulses from a Ti:sapphire laser (Tsunami, Spectra Physics) having a bandwidth of ~8.5 nm centered on a wavelength of 800 nm, corresponding to pulses having a width of ~100 fs. A diffraction grating having a ruling of 1200 lines/mm and area 25 × 25 mm^{2} in reflection mode (Newport 10HG12008001) is used to spread the pulse spectrum in space and the second diffraction order is selected to increase the spectral resolving power, resulting in an estimated spectral uncertainty of δλ ≈ 24 pm. After spreading the full spectral bandwidth of the pulse in space, the width size of the SLM (≈16 mm) acts as a spectral filter, thus reducing the bandwidth of the ST wave packet below the initial available bandwidth and minimizing the impact of any residual chirping in the input pulse. An aperture A can be used to further reduce the temporal bandwidth when needed. The spectrum is collimated using a cylindrical lens L_{1−y} of focal length f = 50 cm in a 2f configuration before impinging on the SLM. The SLM imparts a 2D phase modulation to the wave front that introduces controllable spatiotemporal spectral correlations. The retroreflected wave from is then directed through the lens L_{1−y} back to the grating G, whereupon the ST wave packet is formed once the temporal/spatial frequencies are superposed; see Supplementary Fig. 1. Details of the synthesis procedure are described elsewhere^{20,43,47,48}.
Spectral analysis of ST wave packets
To obtain the spatiotemporal spectrum \(\tilde E(k_x,\lambda )^2\) plotted in Fig. 3a in the main text, we place a beam splitter BS_{2} within the ST synthesis system to sample a portion of the field retroreflected from the SLM after passing through the lens L_{1−y}. The field is directed through a spherical lens L_{4−s} of focal length f = 7.5 cm to a CCD camera (CCD_{2}); see Supplementary Fig. 1. The distances are selected such that the field from the SLM undergoes a 4f configuration along the direction of the spread spectrum (such that the wavelengths remain separated at the plane of CCD_{2}), while undergoing a 2f system along the orthogonal direction, thus mapping each spatial frequency k_{x} to a point.
Reference pulse preparation
The reference pulse is obtained from the initial pulsed beam before entering the ST wave packet synthesis stage via a beam splitter BS_{1}. The beam power is adjusted using a neutral density filter, and the spatial profile is enlarged by adding a spatial filtering system consisting of two lenses and a pinhole of diameter 30 μm. The spherical lenses are L_{5−s} of focal length f = 50 cm and L_{6−s} of focal length f = 10 cm, and they are arranged such that the pinhole lies at the Fourier plane. The spatially filtered pulsed reference then traverses an optical delay line before being brought together with the ST wave packet.
Beam analysis
The ST wave packet is imaged from the plane of the grating G to an output plane via a telescope system comprising two cylindrical lenses L_{2−x} and L_{3−x} of focal lengths 40 cm and 10 cm, respectively, arranged in a 4f system. This system introduced a demagnification by a factor 4×, which modifies the spatial spectrum of the ST wave packet. The phase pattern displayed by the SLM is adjusted to precompensate for this modification. The ST wave packet and the reference pulse are then combined into a common path via a beam splitter BS_{3}. A CCD camera (CCD_{1}) records the interference pattern resulting from the overlap of the ST wave packet and reference pulse, which takes place only when the two pulses overlap also in time; see Supplementary Fig. 2.
Group velocity measurements
Moving CCD_{1} a distance Δz introduces an extra common distance in the path of both beams. However, since the ST wave packet travels at a group velocity v_{g} and the reference pulse at c, a relative group delay of \(\Delta \tau = \Delta z({\textstyle{1 \over c}}  {\textstyle{1 \over {v_{\mathrm{g}}}}})\) is introduced and the interference at CCD_{1} is lost if \({\mathrm{\Delta }}\tau \gg {\mathrm{\Delta }}T\), where ΔT is the width of the ST wave packet in time. The delay line in the path of the reference pulse is then adjusted to introduce a delay τ = Δτ to regain the interference. In the subluminal case v_{g} < c, the reference pulse advances beyond the ST wave packet, and the interference is regained by increasing the delay traversed by the reference pulse with respect to the original position of the delay line. In the superluminal case v_{g} > c, the ST wave packet advances beyond the reference pulse, and the interference is regained by reducing the delay traversed by the reference pulse with respect to the original position of the delay line. When v_{g} takes on negative values, the delay traversed by the reference pulse must be reduced even further. Of course, in the luminal case the visibility is not lost by introducing any extra common path distance Δz. See Supplementary Fig. 3 for a graphical depiction.
From this, the group velocity is given by
For a given value of Δz, we fit the temporal profile I(0, 0, τ) to a Gaussian function to determine its center from which we estimate Δτ. For each tilt angle θ, we repeat the measurement for three different values of Δz and set one of the positions as the origin for the measurement set: 0 mm, 2 mm, and 4 mm in positive subluminal case (Supplementary Fig. 4a); 0 mm, 5 mm, and 10 mm in the positive superluminal case (Supplementary Fig. 4b); and 0 mm, −5 mm, and −10 mm in the negativev_{g} case (Supplementary Fig. 4c). Finally, we fit the obtained values to a linear function, where the slope corresponds to the group velocity. The uncertainty in estimating the values of v_{g} (Δv_{g} in Supplementary Table 1 and error bars for Fig. 4) are obtained from the standard error in the slope resulting from the linear regression.
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Brillouin, L. Wave Propagation and Group Velocity (Academic Press, New York, 1960).
SchulzDuBois, E. O. Energy transport velocity of electromagnetic propagation in dispersive media. Proc. IEEE 57, 1748–1757 (1969).
Boyd, R. W. & Gauthier, D. J. Controlling the velocity of light pulses. Science 326, 1074–1077 (2009).
Hau, L. V., Harris, S. E., Dutton, Z. & Behroozi, C. Light speed reduction to 17 m per second in an ultracold atomic gas. Nature 397, 594–598 (1999).
Kash, M. M. et al. Ultraslow group velocity and enhanced nonlinear optical effects in a coherently driven hot atomic gas. Phys. Rev. Lett. 82, 5229–5232 (1999).
Wang, L. J., Kuzmich, A. & Dogariu, A. Gainassisted superluminal light propagation. Nature 406, 277–279 (2000).
Song, K. Y., Herráez, M. G. & Thévenaz, L. Gainassisted pulse advancement using single and double Brillouin gain peaks in optical fibers. Opt. Express 13, 9758–9765 (2005).
Casperson, L. & Yariv, A. Pulse propagation in a highgain medium. Phys. Rev. Lett. 26, 293–295 (1971).
Gehring, G. M., Schweinsberg, A., Barsi, C., Kostinski, N. & Boyd, R. W. Observation of backward pulse propagation through a medium with a negative group velocity. Science 312, 895–897 (2005).
Baba, T. Slow light in photonic crystals. Nat. Photon. 2, 465–473 (2008).
Dolling, G., Enkrich, C., Wegener, M., Soukoulis, C. M. & Linden, S. Simultaneous negative phase and group velocity of light in a metamaterial. Science 312, 892–894 (2005).
Steinberg, A. M., Kwiat, P. G. & Chiao, R. Y. Measurement of the singlephoton tunneling time. Phys. Rev. Lett. 71, 708–711 (1993).
Tsakmakidis, K. L., Hess, O., Boyd, R. W. & Zhang, X. Ultraslow waves on the nanoscale. Science 358, eaan5196 (2017).
Giovannini, D. et al. Spatially structured photons that travel in free space slower than the speed of light. Science 347, 857–860 (2015).
Bouchard, F., Harris, J., Mand, H., Boyd, R. W. & Karimi, E. Observation of subluminal twisted light in vacuum. Optica 3, 351–354 (2016).
Lyons, A. et al. How fast is a twisted photon? Optica 5, 682–686 (2018).
Turunen, J. & Friberg, A. T. Propagationinvariant optical fields. Prog. Opt. 54, 1–88 (2010).
HernándezFigueroa, H. E., Recami, E. & ZamboniRached, M (eds). NonDiffracting Waves (WileyVCH, Weinheim, 2014)
Donnelly, R. & Ziolkowski, R. Designing localized waves. Proc. R. Soc. Lond. A 440, 541–565 (1993).
Kondakci, H. E. & Abouraddy, A. F. Diffractionfree spacetime beams. Nat. Photon. 11, 733–740 (2017).
Longhi, S. Gaussian pulsed beams with arbitrary speed. Opt. Express 12, 935–940 (2004).
Saari, P. & Reivelt, K. Generation and classification of localized waves by Lorentz transformations in Fourier space. Phys. Rev. E 69, 036612 (2004).
Saari, P. & Reivelt, K. Evidence of Xshaped propagationinvariant localized light waves. Phys. Rev. Lett. 79, 4135–4138 (1997).
Alexeev, I., Kim, K. Y. & Milchberg, H. M. Measurement of the superluminal group velocity of an ultrashort Bessel beam pulse. Phys. Rev. Lett. 88, 073901 (2002).
Bonaretti, F., Faccio, D., Clerici, M., Biegert, J. & Di Trapani, P. Spatiotemporal amplitude and phase retrieval of BesselX pulses using a HartmannShack sensor. Opt. Express 17, 9804–9809 (2009).
Bowlan, P. et al. Measuring the spatiotemporal field of ultrashort BesselX pulses. Opt. Lett. 34, 2276–2278 (2009).
Lu, J.Y. & Greenleaf, J. F. Nondiffracting X waves – exact solutions to freespace scalar wave equation and their finite aperture realizations. IEEE Trans. Ultrason. Ferroelec. Freq. Control 39, 19–31 (1992).
Di Trapani, P. et al. Spontaneously generated Xshaped light bullets. Phys. Rev. Lett. 91, 093904 (2003).
Faccio, D. et al. Conical emission, pulse splitting, and Xwave parametric amplification in nonlinear dynamics of ultrashort light pulses. Phys. Rev. Lett. 96, 193901 (2006).
Faccio, D. et al. Spatiotemporal reshaping and X wave dynamics in optical filaments. Opt. Express 15, 13077–13095 (2007).
Dallaire, M., McCarthy, N. & Piché, M. Spatiotemporal bessel beams: theory and experiments. Opt. Express 17, 18148–18164 (2009).
Jedrkiewicz, O., Wang, Y.D., Valiulis, G. & Di Trapani, P. One dimensional spatial localization of polychromatic stationary wavepackets in normally dispersive media. Opt. Express 21, 25000–25009 (2013).
Kuntz, K. B. et al. Spatial and temporal characterization of a bessel beam produced using a conical mirror. Phys. Rev. A 79, 043802 (2009).
Lõhmus, M. et al. Diffraction of ultrashort optical pulses from circularly symmetric binary phase gratings. Opt. Lett. 37, 1238–1240 (2012).
Piksarv, P. et al. Temporal focusing of ultrashort pulsed Bessel beams into AiryBessel light bullets. Opt. Express 20, 17220–17229 (2012).
Kondakci, H. E. & Abouraddy, A. F. Diffractionfree pulsed optical beams via spacetime correlations. Opt. Express 24, 28659–28668 (2016).
Parker, K. J. & Alonso, M. A. The longitudinal isophase condition and needle pulses. Opt. Express 24, 28669–28677 (2016).
Liu, Z. & Fan, D. Propagation of pulsed zerothorder Bessel beams. J. Mod. Opt. 45, 17–21 (1998).
Sheppard, C. J. R. Generalized Bessel pulse beams. J. Opt. Soc. Am. A 19, 2218–2222 (2002).
ZapataRodríguez, C. J., Porras, M. A. & Miret, J. J. Freespace delay lines and resonances with ultraslow pulsed Bessel beams. J. Opt. Soc. Am. A 25, 2758–2763 (2008).
Valtna, H., Reivelt, K. & Saari, P. Methods for generating wideband localized waves of superluminal group velocity. Opt. Commun. 278, 1–7 (2007).
ZapataRodríguez, C. J. & Porras, M. A. Xwave bullets with negative group velocity in vacuum. Opt. Lett. 31, 3532–3534 (2006).
Kondakci, H. E. & Abouraddy, A. F. Airy wavepackets accelerating in spacetime. Phys. Rev. Lett. 120, 163901 (2018).
Bélanger, P. A. Lorentz transformation of packetlike solutions of the homogeneouswave equation. J. Opt. Soc. Am. A 3, 541–542 (1986).
Porras, M. A. Gaussian beams diffracting in time. Opt. Lett. 42, 4679–4682 (2017).
Porras, M. A. Nature, diffractionfree propagation via spacetime correlations, and nonlinear generation of timediffracting light beams. Phys. Rev. A 97, 063803 (2018).
Bhaduri, B., Yessenov, M. & Abouraddy, A. F. Meterslong propagation of diffractionfree spacetime light sheets. Opt. Express 26, 20111–20121 (2018).
Kondakci, H. E. et al. Synthesizing broadband propagationinvariant spacetime wave packets using transmissive phase plates. Opt. Express 26, 13628–13638 (2018).
SainteMarie, A., Gobert, O. & Quéré, F. Controlling the velocity of ultrashort light pulses in vacuum through spatiotemporal couplings. Optica 4, 1298–1304 (2017).
Froula, D. H. et al. Spatiotemporal control of laser intensity. Nat. Photon. 12, 262–265 (2018).
Averchi, A. et al. Phase matching with pulsed Bessel beams for highorder harmonic generation. Phys. Rev. A 77, 021802(R) (2008).
Bahabad, A., Murnane, M. M. & Kapteyn, H. C. Quasiphasematching of momentum and energy in nonlinear optical processes. Nat. Photon. 4, 570–575 (2010).
Turnbull, D. et al. Raman amplification with a flying focus. Phys. Rev. Lett. 120, 024801 (2018).
Turnbull, D. et al. Ionization waves of arbitrary velocity. Phys. Rev. Lett. 120, 225001 (2018).
Byrnes, T., Kim, N. Y. & Yamamoto, Y. Excitonpolariton condensates. Nat. Phys. 10, 803–813 (2014).
Acknowledgements
We thank D. N. Christodoulides and A. Keles for helpful discussions. This work was supported by the U.S. Office of Naval Research (ONR) under contract N000141712458.
Author information
Authors and Affiliations
Contributions
A.F.A. and H.E.K. developed the concept, designed the experiment, and wrote the paper. H.E.K. carried out the experimental work and the data analysis.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Journol peer review information: Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kondakci, H.E., Abouraddy, A.F. Optical spacetime wave packets having arbitrary group velocities in free space. Nat Commun 10, 929 (2019). https://doi.org/10.1038/s41467019087358
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467019087358
This article is cited by

Elusive phase wave caught
Nature Physics (2023)

Nonlocal flat optics
Nature Photonics (2023)

Observation of optical de Broglie–Mackinnon wave packets
Nature Physics (2023)

Strong double spacetime wave packets using optical parametric amplification
Communications Physics (2022)

Taming light in all dimensions
Nature Photonics (2022)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.