Abstract
The resolution of an imaging system is a key property that, despite many advances in optical imaging methods, remains difficult to define and apply. Rayleigh’s and Abbe’s resolution criteria were developed for observations with the human eye. However, modern imaging data is typically acquired on highly sensitive cameras and often requires complex image processing algorithms to analyze. Currently, no approaches are available for evaluating the resolving capability of such image processing algorithms that are now central to the analysis of imaging data, particularly locationbased imaging data. Using methods of spatial statistics, we develop a novel algorithmic resolution limit to evaluate the resolving capabilities of locationbased image processing algorithms. We show how insufficient algorithmic resolution can impact the outcome of locationbased image analysis and present an approach to account for algorithmic resolution in the analysis of spatial location patterns.
Introduction
Resolution is one of the most important properties of an imaging system, yet it remains difficult to define and apply. Rayleigh’s and Abbe’s resolution criteria^{1} were developed for observations with the human eye and had a major influence on the development of optical instruments. However, no systematic approach is yet available for the evaluation of the often complex image processing algorithms that have become central to the analysis of the imaging data that today is acquired by highly sensitive cameras. This is particularly relevant for the many modern imaging experiments and corresponding image processing algorithms for which the detection of objects (e.g., molecules, molecular complexes, subcellular organelles) form an integral aspect. Examples are localizationbased superresolution experiments (PALM, STORM, etc.^{2,3,4}), experiments to investigate the arrangement of molecular complexes on the cellular membrane such as clathrincoated pits^{5,6}, experiments tracking single particles^{7,8} or subcellular organelles^{9}, etc.
Common to the analysis of experimental data produced by such “objectbased” imaging experiments is the central role that image analysis algorithms play in the identification and localization of the underlying objects, be they single molecules, clathrincoated pits, etc. The success of such imaging experiments is, therefore, to a large extent dependent on how well these algorithms can resolve the imaged objects^{10}. The assessment of such algorithms in terms of their resolution capabilities is, however, largely unexplored.
Here, we use methods of spatial statistics to quantitatively evaluate the resolution capabilities of locationbased image analysis algorithms and to demonstrate the impact of resolution limitations on the analysis of objectbased imaging data. A specific example that we will consider in detail relates to the question of whether the distribution of clathrincoated pits is purely random or exhibits other spatial characteristics such as clustering. Methods of spatial statistics, which have been extensively used in different scientific disciplines^{11}, form the theoretical background for the development of this manuscript and underpin the presented methods for evaluating locationbased image analysis algorithms. This theoretical background is introduced in Supplementary Note 1 and rigorously developed in Supplementary Notes 2–7. Central to this analysis is the notion of algorithmic resolution which we introduce to characterize an algorithm’s ability to resolve objects.
Results
Detecting the effect of algorithmic resolution
First, we show that insufficient “algorithmic resolution” of an image analysis algorithm can have a significant impact on the outcome of the analysis of spatial patterns which is typically carried out using the paircorrelation function or Ripley’s Kfunction^{11} (see Supplementary Note 2). For a spatial pattern that is uniformly distributed (in the probabilistic sense), also termed completely spatially random, the paircorrelation function g, which describes the relationship between pairs of objects that are a distance r apart, is given by the identity function g(r) = 1, r > 0. Ripley’s Kfunction, which describes the expected number of objects within a distance r of an arbitrary object, is given by K(r): = πr^{2}, r > 0, for a completely spatially random pattern. This implies that the related L(r) − r function, where \(L(r): = \sqrt {(K(r)/\pi )}\) for r > 0, is constant and equal to zero. The L(r) − r function is nonzero if the point pattern is not completely spatially random. Clustering, in which objects are typically closer to each other than one would expect under complete spatial randomness, is characterized through positive values of this function, whereas deviations from 0 to negative values indicates inhibition or regularity, meaning that the spacing of points is somewhat larger than that in completely spatially random data. Here, it is also instructive to recall that completely spatially random data are those in which the events occur completely at random and independently of each other. So at first sight some spatial configurations of events might be seen that resemble clusters, whereas in other areas large “empty” patches might be seen (see Supplementary Figure 1). These occur purely by chance and are not due to some underlying correlation structure within the data. However, importantly for our considerations, all possible spatial configurations of events are sampled.
An important question in cell biology is whether or not structures are organized in a regular way or do not have particular relations among them. Clathrincoated pits play a major role in endocytosis. Whether clathrincoated pits are positioned in an ordered fashion is of major interest in cell biology. Translated into the language of spatial statistics, we are therefore interested in whether or not clathrincoated pits are distributed in a completely spatially random fashion^{5,6}. This question itself can be addressed by investigating the L(r) − r function of the locations of the pits.
The clathrincoated pit imaging data of Fig. 1a was processed using several established algorithms (see the list of image analysis approaches in Methods) to determine the locations of the pits (Fig. 1b, c), which were then further analyzed by plotting the estimated \(\hat L(r)  r\) function (Fig. 1d). The analysis appears to show that the pits are not distributed in a completely spatially random fashion as the \(\hat L(r)  r\) plot is not equal to zero for all the processing schemes, thereby suggesting a nonuniform arrangement of the pits on the plasma membrane. To understand this behavior, we simulated clathrincoated pits that are located according to a completely spatially random distribution (Fig. 1e). Estimating and analyzing the locations of these simulated pits (Fig. 1f, g) in the same fashion as done for the experimentally acquired data reveals that the resulting \(\hat L(r)  r\) plots show remarkable similarity with those obtained from the experimentally acquired data (Fig. 1h). Importantly, these plots do not show a constant value of 0 as would be expected for completely spatially random data. This suggests that the deviations from the expected constant appearance of the \(\hat L(r)  r\) function are due to effects of the data analysis rather than being a property of the distribution of the clathrincoated pits.
To further understand this phenomenon, we investigated whether the observed effects might be due to the different capabilities of the image processing algorithms to resolve clathrincoated pits. To do this, in Supplementary Notes 3–5 we theoretically analyzed the impact of limited “algorithmic resolution” of an image analysis algorithm on the paircorrelation and the L(r) − r functions. We modeled the effect of an algorithm not being able to distinguish objects that are spaced closer than a certain cutoff distance. If the objects are located in a completely spatially random fashion, the resulting L(r) − r function has an appearance similar to that observed in the analysis of the clathrincoated pit data. These observations indicate that the resolving capabilities of image analysis algorithms need to be taken into consideration when analyzing objectbased imaging data.
Importantly, this analysis also suggests that the resolving capabilities of an image processing approach can be characterized by the deviation from the expected spatial analysis results for objects that are simulated with a completely spatially random location pattern. We therefore determine the algorithmic resolution limit, α, of a particular objectbased image analysis algorithm by using this algorithm to estimate the locations of objects that are simulated with completely spatially random positions. It is shown in Supplementary Note 5 (with further discussion in Supplementary Note 12) that resolution effects up to a distance of α impact the paircorrelation function of completely spatially random data for distances up to 2α. Therefore, the algorithmic resolution limit α is then defined as half the distance in the paircorrelation function of the estimated object locations beyond which the graph exhibits a constant plot with value 1.
Algorithmic resolution limit
We analyzed several wellestablished image analysis algorithms. The purpose of this manuscript is not the evaluation of specific algorithms but to illustrate the methodology surrounding algorithmic resolution. We have largely used the algorithms with the default settings as they are available when downloaded. It is very well possible that an expert user of a particular algorithm could obtain significantly better results than those presented here.
We found that across the algorithms used, the algorithmic resolution limits can vary significantly (Fig. 2d). In fact, some of these algorithms are affected by algorithmic resolution well beyond the resolution limit that is predicted by Rayleigh’s criterion, which is around 250–300 nm for the imaging conditions in Fig. 1. Algorithm 2 has the smallest algorithmic resolution limit of 360 nm, whereas Algorithm 3 has an algorithmic resolution limit of 620 nm, almost twice that of Algorithm 2. Using completely spatially random data as a basis to analyze the resolution capability and to define the algorithmic resolution limit of objectbased image analysis algorithms allows us to probe random configurations of object locations. Therefore, the concept of the algorithmic resolution limit also has applicability to object arrangements that are nonstochastic. As illustrated in Fig. 3a (see also Supplementary Figure 12), the deterministically arranged object locations that could be reliably identified coincide with those locations that are spaced at a distance larger than the algorithmic resolution limit.
Our analysis has also revealed shortcomings in some established algorithms beyond the impact of algorithmic resolution. Two of the algorithms, Algorithms 4 and 5, exhibit oscillatory behavior in the paircorrelation function even for very large distances. Upon further investigation, we found that these algorithms preferentially identify objects located towards the center of the pixels (see Supplementary Figure 11). As a result, the algorithmic resolution limit of these algorithms is taken as infinite or not defined. We also analyzed a multiemitter algorithm, Algorithm 6. Multiemitter algorithms have been introduced to deal with the location estimation of very closely spaced emitters. The corresponding paircorrelation function shows a very interesting profile that has a significantly more complex appearance than the paircorrelation functions for the other algorithms. For example, for low distances large values are obtained suggesting a clustering type behavior. Only for very large distance values does the paircorrelation function approach 1 (see Supplementary Figure 13a) which is also reflected in a very large algorithmic resolution limit of 577.5 nm which is significantly larger than the algorithmic resolution limit for the single emitter version. This emphasizes the difficulty in devising algorithms that can successfully resolve multiemitters and not introduce problems, although other multiemitter algorithms would need analyzing individually to check whether they exhibited similar behavior. The ring figures (see Supplementary Figure 13cd) also reveal somewhat surprising behavior by overestimating the number of emitters for several isolated spots. This suggests that the algorithm, for the default settings we used, does not necessarily faithfully determine the multiplicity of the point sources.
We note at this point that the procedure used for estimating the algorithmic resolution limit from a paircorrelation function, as described in Supplementary Note 9, is just one of many potential approaches. We have developed this automated method for consistency in our results, although some users may find that a visual inspection of the paircorrelation will suffice in understanding an algorithm’s performance and behavior. As with any statistical procedure, the estimate is data dependent and will not be exact. To characterize this uncertainty, we have also proposed a bootstrapping procedure, as outlined in Supplementary Note 9. This uses a resamplingwithreplacement strategy for creating several versions of the paircorrelation function and estimating the algorithmic resolution limit on each one. It is then possible to reason about the uncertainty of the estimator through analyzing the distribution of these bootstrapped estimates and computing approximate confidence intervals.
Ram et al.^{12} analyzed the resolution of objects as it depends on the statistics of the acquired data, in particular the number of acquired photons from the objects and the various noise sources. It was shown that how well the distance between two objects can be measured, in terms of standard deviation, depends strongly on both the distance and the detected photons from the two objects. It is therefore expected that algorithmic resolution also depends on the specifics of the signal levels that are being used. This is indeed the case as illustrated in Supplementary Figure 9 where we see that for simulations with extremely low signal levels the paircorrelation functions for the different algorithms take on different forms and as a result also worsen the algorithmic resolution limit. Importantly, however, for all other higher signal levels such as those for which singlemolecule experiments are usually conducted, there are no appreciable differences in the regions of the curves that determine the algorithmic resolution limit and as a result in the estimate of the limit itself. This independence is further consistent with the results of Ram et al.^{12,13} as for the distances around Rayleigh’s resolution criterion very good estimates can be obtained even for relatively low signal levels.
Quantifying the effect of algorithmic resolution
The question immediately arises, how the algorithmic resolution limit of an image analysis algorithm impacts the analysis of experimental data. For example, it is important to quantitate how many objects remain unaffected by resolution effects when the imaging data are analyzed using an algorithm with algorithmic resolution limit α. As predicted by the theory and verified empirically, the algorithmic resolution limit of an algorithm is independent of the density of objects within the density ranges of general interest (see Supplementary Note 10 and Supplementary Figure 8). However, understanding how the algorithmic resolution limit, object density, and spatial structure of the objects interplay with one another is of vital importance. The effect of object density in fluorescence microscopy is of course well studied^{14,15,16,17} and here we provide further insight into its role.
As shown in Supplementary Note 6, the probability that an object is unaffected by resolution effects, what we here call the probabilistic resolution, is given by 1 − G_{O}(α). Here, G_{O} is the nearestneighbor probability distribution function for the objects, describing the probability that an arbitrary object is at a distance less than α from its nearest neighboring object (see Supplementary Note 2 for its formal definition). If the objects are located according to a completely spatially random distribution, G_{O}(α) = 1 − exp(−λ_{O}πα^{2}), where λ_{O} is the density of the object locations. Therefore, in a highly dense object pattern, not surprisingly, the probability that an object is not affected by algorithmic resolution is severely reduced.
For example, consider cellular membrane receptor clusters distributed in a completely spatially random fashion with a density of 1 cluster per square micrometer (as in Fig. 1e). When analyzing the location of such protein clusters using an algorithm with algorithmic resolution limit α = 360 nm (e.g., Algorithm 2), the probability a cluster is not affected by resolution (the probabilistic resolution) is 66.5%. However, when analyzing the cluster locations using an algorithm with α = 620 nm (e.g., Algorithm 3), the probabilistic resolution is 29.9%. Thus, the difference in algorithmic resolution between the two algorithms can have drastic effects on the analysis of the data. Further, it is only for cluster densities of 0.1 clusters per square micrometer that the probabilistic resolution will be above 95% (with 96.0%) for an algorithm with α = 360 nm. However, this probability decreases significantly to 88.6% for the algorithm with α = 620 nm. Other spatial distributions can be assessed through similar analysis of their nearestneighbor distribution function. This will be demonstrated by applying this probabilistic approach to localization microscopy.
Application to localization microscopy
Localizationbased superresolution methods use repeat stochastic excitation of small subsets of the fluorophores in a sample^{4}. The question therefore arises how small these subsets need to be in order for a large fraction of the single molecules/objects to be spatially isolated and not affected by the algorithmic resolution limit of the analysis step.
To quantify this, let us denote q to be the probability of an object appearing in any given frame of the dataset. For example, in an ideal PALM experiment where molecules are evenly distributed across n_{F} frames, we have \(q\,=\,n_{\mathrm{F}}^{  1}\), and in the classical microscopy setting, when all objects appear in a single frame, we have q = 1. It is shown in Supplementary Note 7 that the probabilistic resolution becomes 1 − G_{q}(α). Here, G_{q} is the nearestneighbor distribution function for the subset of objects that appear in an arbitrary frame. We recall that G_{q}(α) is the probability an arbitrary object within the frame is within a distance α of its nearest neighbor. Therefore, for 0 < q < 1, we have G_{q}(α) < G_{O}(α), where G_{O} is the nearestneighbor distribution function for the full dataset of objects (i.e. if all objects appear in a single frame). This shows how the probabilistic resolution increases by separating the objects among frames. Furthermore, if we increase the number of frames from n_{F} to \(n_{\mathrm{F}}'\), and hence decrease the probability an object appears in an arbitrary frame from q to q′, we have G_{q′}(α) < G_{q}(α) and the probabilistic resolution further increases. Importantly, it is shown in Supplementary Note 7 that probabilistic resolution becomes 1 (i.e. all objects are perfectly resolved) as \(q\,=\,n_{\mathrm{F}}^{  1}\) tends to zero. More so, if one wishes to insist the probabilistic resolution must be greater than some value p, it is required that q is chosen such that p < 1 − G_{q}(α). We will illustrate these concepts with two examples: clustered objects and tubulin data.
Clustered objects
Suppose the single molecules to be localized exist in clusters. A simple model one may apply in this setting is that the cluster centers are completely spatially random and single molecules are distributed about the cluster centers according to a 2D spherically symmetric Gaussian distribution. In this setting, the nearestneighbor distribution function can be derived^{18} and is presented in Supplementary Note 8. For example, consider imaging a clustered process of this type in which there is an average of ten clusters per 30 μm^{2}, an expected 100 single molecules per cluster, each distributed around the cluster center with a standard deviation of 0.05 μm in both x and y directions. An example realization of this process is shown in Fig. 4a. For an algorithmic resolution limit of α = 500 nm, if all the single molecules were to be imaged in a single frame the probability of an arbitrary object being unaffected by resolution is 0 (to machine precision). However, if the single molecules were imaged using sparse subsets across multiple frames with a probability of q = 1/1000, the probabilistic resolution rises to 88.2%. For q = 1/10,000 it rises further to 96.8%. Suppose we wish to achieve a probabilistic resolution of at least 99% we require q ≤ 7.97×10^{−5}, which would require a minimum of 12,548 frames to achieve. Completely spatially random molecules of the same average intensity would require only 3907 frames (q = 2.56×10^{−4}) to attain the same level of probabilistic resolution. This demonstrates the extra demands that clustered data present.
Interestingly, it is shown in Supplementary Note 7 that in order to achieve the same level of probabilistic resolution in a classical singlemolecule experiment where all single molecules are activated and imaged in a single acquisition, an algorithmic resolution of \(G_{\mathrm{O}}^{  1}(G_q(\alpha ))\) is required. When q = 1/1000 and α = 500 nm, this would require an algorithmic resolution limit of 3.56 nm, which is well beyond what is currently achievable, thus illustrating the power of using stochastic excitation for localizationbased singlemolecule superresolution experiments. A demonstration of this calculation is shown in Fig. 4c.
Tubulin data
We consider a tubulin dataset^{10} consisting of 1×10^{5} emitters imaged over 2401 frames (see Fig. 4d). This gives q = 1/2401 and an average of 41.6 emitters per frame. Supplementary Note 8 gives details on computing the nearestneighbor distribution function for this dataset. For this value of q and an algorithmic resolution limit of α = 360 nm (e.g., Algorithm 2), the probabilistic resolution equal to 1 − G_{q}(α) is found to be 86.4%. To achieve the same level of probabilistic resolution in a classical singlemolecule experiment where all single molecules are activated and imaged in a single acquisition, an algorithmic resolution of 1.38 nm is required, again illustrating the power of using stochastic excitation for localizationbased singlemolecule superresolution experiments. A demonstration of this calculation is shown in Fig. 4f. Changing q to 1/10,000 increases the probabilistic resolution to 96.8% whereas for q = 1/1000 the probabilistic resolution is decreased to 71.2%. Verification of this analysis is provided in Fig. 4g. The proportion of correct localizations (within 12 nm of a ground truth coordinate) is plotted for different values of q. This is compared to the theoretical probabilistic resolution as presented in Supplementary Note 7 and estimated using the scheme in Supplementary Note 8.
An experimental tubulin dataset is also considered to further verify the results presented. The original dataset, Dataset 1, is comprised of 50,000 frames and contains approximately 3.2×10^{6} localizations for Algorithm 1, 2.5×10^{6} localizations for Algorithm 2 and 0.7×10^{6} localizations for Algorithm 3. Averaging pairs of images, we are able to create Dataset 2 that consists of 25,000 frames, each with double the object density. Dataset 3, formed by averaging triplets of frames, consists of 16,666 frames with triple the object density. This is repeated up to Dataset 10, which consists of 5000 frames with ten times the object density. The number of localizations generated by each algorithm for each dataset is shown in Fig. 4h (and Supplementary Figure 14 shows examples of the reconstructed images from these datasets). These results demonstrate two key points. The first is it can be seen that Algorithm 2, the algorithm with the smallest resolution limit, has the largest number of localizations. Furthermore, Algorithm 1, which has a similar algorithmic resolution limit, has a very similar number of localizations. However, Algorithm 3, which has an algorithmic resolution limit almost twice as large as Algorithms 1 and 2, produces far fewer localizations. This is consistent with the presented theory; a larger algorithmic resolution results in a smaller probabilistic resolution under the same molecule density, and as such we would expect fewer localizations. The second point is that the number of localizations decreases as the density increases. Again, this is predicted under our theoretical framework since we show probabilistic resolution decreases with density. This demonstrates that experimental observations on the performance of different algorithms are consistent with the findings of the paper, which have been reached from simulation methods.
Adjusting for algorithmic resolution
We have seen that algorithmic resolution can significantly distort Ripley’s Kfunction. However, knowing the algorithmic resolution limit α of an algorithm allows us to define a resolutioncorrected Ripley’s K_{2α}function and resolutioncorrected L_{2α}(r) − r for r ≥ 2α (see Supplementary Note 11). Figure 3c shows that inhibition and clustering can be correctly identified with the resolutioncorrected L_{2α}(r) − r function if they occur at distances above 2α for objectbased imaging data analyzed with an algorithm of resolution limit α.
If the clathrincoated pit data of Fig. 1a is analyzed using an algorithm with algorithmic resolution limit α = 360 nm (e.g., Algorithm 2) and the estimated locations processed with the resolutioncorrected L_{2α}(r) − r function, the data show that there is no significant deviation from complete spatial randomness beyond the distance of 2α = 720 nm (Fig. 2e, f). This indicates that at distances above twice the algorithmic resolution limit for the individual algorithms, the clathrincoated pit locations do not show any deviation from complete spatial randomness.
Discussion
Resolution has been analyzed in microscopy going back to the classical criteria by Rayleigh and Abbe. Those criteria address the performance of the imaging optics. Using an informationtheoretic approach, Rayleigh’s resolution criterion was generalized and put in the context of modern imaging where data consist of noisecorrupted photon count measurements acquired through quantumlimited detectors^{12}. A resolution measure based on the Fourier ring coefficient was introduced that can be computed directly from an acquired image and takes into account the standard deviation with which a single molecule can be localized^{19}. Common to these recent approaches is they do not take into account that different objectbased image analysis algorithms can have very different algorithmic resolution limits.
The evaluation of algorithms for singlemolecule image analysis is complex and a number of approaches have been used in the past, many of those comparing the estimated locations with the ground truth of simulated data^{10}. The introduction of the concept of algorithmic resolution in this paper provides an additional tool by determining the minimum distance beyond which the algorithm can reliably distinguish different objects. The analysis presented here also provides important insights into why algorithms perform differently on more classical evaluation approaches (see e.g. Fig. 3a).
Object density has been well recognized as causing significant problems for the objectbased image analysis algorithms^{14,15,16,17}. Here, we have derived analytical approaches that investigate how algorithmic resolution and object density impact the probability of an object being affected by resolution when the data are analyzed with an image analysis algorithm with specific algorithmic resolution limit. Understanding this probabilistic resolution is key to determining if postprocessing methods, for example clustering algorithms^{20} that estimate cluster sizes and the number of objects per cluster, can be used with confidence.
The approach to defining algorithmic resolution that is presented here depends on the availability of test data with objects that are distributed in a completely spatially random fashion. Such data are completely uncorrelated and consequently gives rise to a paircorrelation function that is identically equal to 1. The estimation algorithm that is investigated is then used to estimate locations of these objects based on simulated data with the given object locations. Subsequently, an estimated paircorrelation function is computed based on the estimated locations. The algorithmic resolution limit is defined through the distance below which the estimated paircorrelation function deviates from that based on the true locations, i.e. 1. This approach could be modified to use test data that gives rise to a different paircorrelation function. The point at which the estimated paircorrelation function deviates from the theoretical one could be used as a method of comparing two or more different algorithms. However, with the theoretical results of Supplementary Note 5 pertaining to completely spatially random data, caution should be taken in using these points to estimate algorithm resolution limits.
For the approach to be relevant to experimental settings, it is important that the simulated data used to determine the algorithmic resolution limit reflects the data that will be acquired when the algorithm is applied in an experimental setting. As we have seen, the determination of the algorithmic resolution limit does depend on the photon count of the simulated singlemolecule data in certain circumstances, such as extremely low photon counts. We have also seen a dependence on the density of the sampled objects, again in extreme cases. It is equally clear that other model parameters that determine the appearance of the images of the objects under study need to be matched to the experimental settings to be able to expect reliable results. If experimental data were available that can be guaranteed to be made up of objects that are located in a completely spatial random manner, then such data could also be used. However, guaranteeing that objects are located in a completely spatially random fashion would be very difficult to achieve. Unless such a guarantee is available, simulated data are to be preferred as complete spatial randomness of these test data is critical for the approach.
We have introduced a methodology to systematically assess the algorithmic resolution limit of objectbased image analysis algorithms and to evaluate the impact of the limitations on the analysis of microscopy data. We hope that the approaches presented will contribute to a systematic evaluation of such algorithms that are of relevance not only to microscopy applications but to other objectbased imaging scenarios such as those arising, for example, in astronomy.
Spatial statistics has played an important role in many areas of cell biology. We hope that the results presented here will contribute to an improved understanding of the methodology and lead to the avoidance of misinterpretation of the acquired data. In particular the use of the resolutioncorrected Ripley’s Kfunction is expected to be a powerful tool for cell biological studies that rely on spatial statistics.
Methods
Preparing HMEC1 cells for fluorescence imaging
HMEC1 cells were fixed using 1.7% (w/v) paraformaldehyde (Electron Microscopy Sciences) at room temperature and permeabilized by incubation with 0.02% (w/v) saponin in phosphatebuffered saline (PBS) for 10 min at room temperature. Cells were then preblocked with 3% bovine serum albumin (BSA) in PBS, incubated with antiClathrin primary antibody (mouse monoclonal X22, Catalog # ab2731, Abcam, diluted 1000fold in 1% BSA/PBS) for 25 min at room temperature, and treated with goat serum diluted 50fold. Bound primary antibody was detected by treatment with Alexa 555labeled antimouse IgG (Catalog # A21424, Thermo Fisher Scientific, diluted 750fold in 1% BSA/PBS) for 25 min at room temperature. Cells were washed twice with PBS between each incubation and finally immersed in 1.5 ml of 1% BSA/PBS prior to imaging.
Fluorescence microscopy imaging
Fixed HMEC1 cells were imaged with a Zeiss (Axiovert 200M) inverted epifluorescence microscope fitted with a 63× (1.4 NA) Plan Apo objective (Carl Zeiss) using a CCD camera (Orca ER, Hamamatsu). The sample was illuminated using a broadband LED illumination (XCite 110LED, Excelitas Technologies) filtered through a standard Cy3 filterset (Cy34040CZHE M327122 Brightline, Semrock). Signal from the sample was also filtered through this filterset before being acquired by the camera.
Preparing BSC1 cells for superresolution imaging
BSC1 cells (CCL26, American Type Culture Collection) were plated on custom, glassbottom dishes (Catalog # PG35G10CNON, MatTek Corporation) fitted with highperformance Zeiss coverglasses (Catalog # 474030900000, Thickness 1.5) at a density of 20,000 cells and incubated for 16–24 h. The coverglasses were cleaned by sonicating them sequentially in 50% HPLC grade ethanol, 1 mM HCL in 50% HPLC grade ethanol, and 1 M KOH in 50% HPLC grade ethanol for 20 min each with extensive washing using MilliQ water after every sonication. The cells were fixed using 3.4% paraformaldehyde (Electron Microscopy Sciences) in PBS for 10 min at 37 °C. The fixed cells were then permeabilized using 0.1% Triton X100 in PBS for 10 min at room temperature. Cells were then preblocked with 5% BSA (Catalog # BP1600, Fisher Scientific), incubated with mouse αtubulin antibody (Catalog # A11126, Thermo Fisher Scientific, diluted 200fold in 1% BSA/PBS) for 30 min at room temperature, and treated with goat serum (Catalog # G6767, Sigma, diluted 50fold in 1% BSA/PBS). Bound primary antibody was counterstained with Alexa 647labeled goat antimouse IgG (Catalog # A21236, Thermo Fisher Scientific, diluted 750fold in 1% BSA/PBS) for 30 min at room temperature.
Optical setup for superresolution imaging
Images of BSC1 cells were acquired using a standard inverted epifluorescence microscope (Observer A1, Zeiss) fitted with a 63× (1.4 NA) PlanApochromat oilimmersion objective (Carl Zeiss). The sample was illuminated using 635 nm and 450 nm diode lasers (OptoEngine) for the excitation of Alexa 647 and for photoswitching respectively. The illumination light was directed towards the microscope using custom laser excitation optics, reflected into the sample using a dichroic filter (Di01R405/488/561/63525x36, Semrock), and focused onto the back focal plane of the objective lens. Signal from the sample was filtered using a bandpass filter (FF01676/2925, Semrock) and acquired by an electron multiplying charge coupled device (EMCCD) camera (iXon DU897BV, Andor) set to conventional readout mode. Axial drift during the course of the acquisition was corrected in real time using a custom focus stabilization system comprising an 850 nm diode laser (PI, USA), a quadrant position detector (Thorlabs), and an XYZ piezo positioner (PI, USA). All devices including lasers, shutters, and cameras were controlled and synchronized using customwritten software in the C programming language.
Superresolution image acquisition
Buffer solutions in which the BSC1 cell samples were prepared were replaced with an imaging buffer immediately prior to the imaging of each sample. This imaging buffer consisted of 50 mM cysteamine, 0.5 mg ml^{−1} glucose oxidase, 40 μg ml^{−1} catalase, and 10% glucose (w/v) in PBS, pH 7.4. (All buffer ingredients were purchased from Thermo Fisher Scientific.) The imaging buffer was freshly prepared for each acquisition. A coverslip was placed over the sample and sealed using vacuum grease. For each acquisition, the sample was briefly illuminated (approximately 5–10 min) using the maximumpower setting of the 635 nm laser to switch off most of the Alexa 647 fluorophores and achieve sparse singlemolecule activation conditions. Acquisition was initiated once steadystate, singlemolecule blinking was observed with periodic illumination using the 405 nm laser to reactivate fluorophores and maintain sufficient activation density. The activation laser power was kept low throughout the acquisition. For each dataset, typically 50,000 images of stochastically activated fluorophores were acquired with 50 ms exposure time for each image and without EM gain resulting in an acquisition rate of 20 frames per second.
Generating completely spatially random locations
For a completely spatially random distribution of locations in an S μm × S μm region, the (x, y) coordinate for each location was obtained by drawing realizations of independent random variables X and Y, each uniformly distributed with probability density functions p_{X}(x) = p_{Y}(y) = 1/S, 0 ≤ x, y ≤ S. For the simulated image in Fig. 2, S = 50 resulting in a 50 μm × 50 μm region.
Generating locations for deterministic structures
Deterministic structures consist of D molecules located at evenly spaced points on the circumference of a circle of radius r. The location of the dth point \((x_0^d,y_0^d)\) is given by \(x_0^d = r\,{\mathrm{cos}}\left( {2\pi d/D} \right)\) and \(y_0^d = r\,{\mathrm{sin}}\,\left( {2\pi d/D} \right)\), where d = 1,…,D.
Generating locations with a preferred spacing (clustering)
A set of N random locations, denoted by Δ, such that N_{c} pairs of those locations are spaced at distances between r_{min} and r_{max} is generated by combining three subsets of locations so that Δ = Δ^{c} ∪ Δ^{c'} ∪ Δ^{u}. The subset Δ\({\varDelta }^{\mathrm{c}}: = \{ d_1^{\mathrm c}, \ldots ,d_{N_{\mathrm{c}}}^{\mathrm{c}}\}\) consists of completely spatially random locations \(d_i^{\mathrm{c}}: = (x_i^{\mathrm{c}},y_i^{\mathrm{c}})\). The subset Δ\({\varDelta }^{{\mathrm{c}}' }: = \{ d_1^{{\mathrm{c}}' }, \ldots ,d_{N_{\mathrm{c}}}^{{\mathrm{c}}' }\}\) consists of locations corresponding to Δ^{c}, where each location \(d_i^{{\mathrm{c}}' }: = (x_i^{{\mathrm{c}}' },y_i^{{\mathrm{c}}' })\), is calculated as
The distance r_{i} between \(d_i^{\mathrm{c}}\) and \(d_i^{{\mathrm{c}}' }\) is uniformly distributed between r_{min} and r_{max}, and θ_{i} is uniformly distributed between 0 and 2π. The subset Δ^{u} is an additional completely spatially random distribution of N_{u} = N − 2N_{c} locations. For the simulated images analyzed to obtain the results in Fig. 3, the following values were used: N = 2500, N_{c} = 250, r_{min} = 2990 nm, and r_{max} = 3010 nm.
Generating locations avoiding specific spacings (inhibition)
A set of locations, Δ ≔ {d_{1},…,d_{N}}, in which no two locations are spaced between r_{min} and r_{max} of each other is generated as follows. For i = 1,…,N, the ith location d_{i} is drawn from a completely spatially random distribution. The ith point is not added as a location if r_{min} ≤ d_{ij} ≤ r_{max} for some 1 ≤ j ≤ i, where d_{ij} denotes the distance between the ith and jth locations. For the simulated images analyzed to obtain the results in Fig. 3, the following values were used: N = 2500, r_{min} = 2990 nm and r_{max} = 3010 nm.
Simulating an image of clathrincoated pits
When simulating an image of clathrincoated pits, the detector is modeled as a set of pixels {C_{1},…,C_{K}}. The photon count detected in the kth pixel is modeled as \({\cal T}_k: = S_k + B_k\), where S_{k} and B_{k} are both Poisson random variables^{21}. The total photons detected at the kth pixel from all clathrincoated pits within the region represented by the image is denoted by S_{k}. The background photon count B_{k} has a mean of B = 100 photons per pixel.
The mean of S_{k} is given by
where D is the total number of clathrincoated pits in the image, N_{d} denotes the total number of photons detected from the dth clathrincoated pit, C_{k} denotes the area of the kth pixel, and f_{d} denotes the photon distribution profile for the dth clathrincoated pit. For the simulated image of clathrincoated pits in Fig. 1, D = 419 and N_{d} had values uniformly distributed between 500 to 2000 photons.
For each clathrincoated pit, f_{d} is modeled as a Gaussian profile given by
where M denotes magnification, σ denotes the width of the Gaussian profile, and \((x_0^d,y_0^d)\) denotes the center of the dth clathrincoated pit. The coordinate \((x_0^d,y_0^d)\) is drawn from a completely spatially randomly distributed set of D locations generated as described above. For the simulated image in Fig. 1, M = 63 and σ = 120 nm.
Simulating images of single molecules
When simulating an image of single molecules, the detector is again modeled as a set of pixels {C_{1},…,C_{k}}. The photon count detected at the kth pixel is modeled as a Poisson random variable with mean given by,
where N denotes the total number of photons detected from the molecule, C_{k} denotes the area of the kth pixel, f_{d} denotes the photon distribution profile for the dth molecule, and B denotes the uniform number of background photons detected in each pixel. For each molecule, f_{d} is modeled as an Airy profile given by
where J_{1} denotes the firstorder Bessel function of the first kind, \(r  r_0^d = \left((x  Mx_0^d)^2 + (y  My_0^d)^2\right)^{1/2}\), \((x_0^d,y_0^d)\) denotes the location of the dth molecule, and M denotes the magnification of the optical system. κ is calculated as κ = 2πN_{a}/λ, where N_{a} denotes the numerical aperture, and λ denotes the wavelength of the photons emitted by the molecule. The following values were used for simulating all images of single molecules: N_{a} = 1.3, λ = 525 nm, M = 100, and N = 1000 photons. Images that were analyzed for all figures were simulated using a background of B = 0 photons per pixel.
Simulating PALM images of tubulin
When simulating images of fluorescently labeled tubulin molecules that are stochastically photoactivated and detected, each image is taken as an image of single molecules and is simulated as described above. The positions of molecules within each image are obtained by taking a spatial point pattern consisting of N points and uniformly distributing them among n_{F} = ⌈q^{−1}⌉ images, where q is the probability that a molecule is visible in any particular frame. For all simulated tubulin datasets, the spatial point pattern provided by Sage et al.^{10} was used.
List of image analysis approaches
The following is a list of the image analysis approaches that were used:

Algorithm 1 (Wavelet): Detects molecules or clathrincoated pits using waveletfiltering^{22} and estimates their locations by fitting Airy profiles to the detected molecules or Gaussian profiles to the detected pits. Further details are provided below.

Algorithm 2 Detects and localizes molecules using the default settings of the software package taken from ref. ^{23}.

Algorithm 3 Detects and localizes molecules using the default settings of the software package taken from ref. ^{24}.

Algorithm 4 (GlobalThresholding): Detects molecules or clathrincoated pits by identifying pixels above a threshold value and estimates their locations by fitting Airy profiles to the detected molecules or Gaussian profiles to the detected pits. Further details are provided below.

Algorithm 5 Detects and localizes molecules using the default settings of the software package taken from ref. ^{25}.

Algorithm 6 Detects and localizes molecules using the default settings of the multiemitter version of the software package taken from ref. ^{23}.
For Algorithms 2, 3, 5, and 6, the software packages provided by the authors of the algorithms were used. We used the default settings of those software packages and did not attempt to optimize them for use here. The purpose of this paper is not to investigate the different algorithms. We used several algorithms solely to illustrate that different algorithms can have different algorithmic resolutions limits. It is quite likely that an expert could obtain very different results from those shown here. We would therefore like to emphasize that we are not interested in an evaluation of these algorithms per se. To arrive at such an evaluation in a rigorous manner would require a very different approach. For example, the involvement of the authors of the software packages, as is routinely done in software evaluation challenges, is the preferred approach. It is under these provisos that we somewhat reluctantly mention the references to the software packages that were used.
Identifying objects by waveletfiltering
The image was filtered using the product of two consecutive wavelet transforms as described in ref. ^{22}. Each isolated set of one or more edgeconnected pixels obtained from the filtering was identified as a region of the image containing an object, i.e., an individual molecule or clathrincoated pit. For the subsequent localization of that object, a 5 × 5 pixel region centered on the average pixel coordinate of the corresponding set of identified pixels was used.
Identifying objects by globalthresholding
The image was thresholded using 25% of the maximum pixel intensity in the dataset as the threshold value. Each isolated set of one or more edgeconnected pixels obtained from the thresholding was identified as a region of the image containing an object, i.e., an individual molecule or clathrincoated pit. For the subsequent localization of that object, a 5 × 5 pixel region centered on the average pixel coordinate of the corresponding set of identified pixels was used.
Localizing objects detected by wavelet/threshold approaches
Each clathrincoated pit or single molecule was localized by fitting a Gaussian or Airy profile, respectively, to the corresponding 5 × 5 pixel image identified using either waveletfiltering or globalthresholding as described above. An initial location estimate and an initial value for the σ parameter denoting the width of a Gaussian profile was calculated for each clathrincoated pit or single molecule by applying the approach described in ref. ^{26} to the corresponding image. An initial value for the κ parameter of the Airy profile was calculated as 1.323/σ. The background associated with each clathrincoated pit or single molecule was taken as the median of the intensities in the edge pixels of the corresponding 5 × 5 pixel image. An initial estimate of the photon count detected from each molecule or clathrincoated pit was taken as the sum of the pixel intensities in the corresponding image after subtracting the background. Airy or Gaussian profiles with initial values for the various parameters calculated as described above were fitted to each 5 × 5 pixel image using a leastsquares estimator to obtain the final location estimates. The location parameters (x_{0}, y_{0}), width parameter (σ when fitting Gaussian profiles and κ when fitting Airy profiles), and the total photon count were estimated for each clathrincoated pit or single molecule.
Estimating Ripley’s Kfunction from one image
When estimating L(r) − r for a set of localizations obtained by analyzing an image of either clathrincoated pits or single molecules, \(L(r) = \sqrt {K(r)/\pi }\) for r > 0. K(r) denotes the Ripley’s Kfunction, defined as
The estimator for K(r) is given by
where S^{2} denotes the area in the object space corresponding to the image being analyzed, w_{ij} denotes the Ripley’s isotropic edge correction weights^{27}, D denotes the total number of localizations, and d_{ij} denotes the distance between the ith and jth localizations. The indicator function is defined as
Estimating Ripley’s Kfunction using multiple images
When estimating L(r) − r for a particular image analysis approach from a total of D localizations distributed among M images,
where D^{m} denotes the number of localizations obtained from the mth image and \(\hat K_m(r)\) denotes estimates of the Ripley’s Kfunction calculated using the localization obtained from that image.
Estimating paircorrelations for an image analysis approach
Estimates of the paircorrelation results for an image analysis approach, denoted as a, were calculated by a weighted averaging of paircorrelation estimates from multiple simulated images as follows. A total of M images containing D single molecules were simulated. A set of localizations of size \(D_a^m\) were obtained by applying analysis approach a to the mth image, for m = 1,…,M. Paircorrelations estimates \(\hat g_a^m(r)\) were calculated independently for each set of \(D_a^m\) localizations using a MATLAB implementation of the approach in ref. ^{28}. The weightedaverage paircorrelation estimates for each analysis approach a is then calculated as
where \(D_a = D_a^1 + D_a^2 + \cdots + D_a^M\). The paircorrelation results shown in Fig. 2 were calculated using M = 2000 images containing D = 250,000 molecules.
Determining the algorithmic resolution limit
The radius of correlation for analysis approach a is defined as
when a analyzes completely spatially random data. To estimate ρ from \(\hat g_a(r)\), the scheme presented in Supplementary Note 9 was implemented. For a set \({\cal R} = \{ r_1, \ldots ,r_m\}\) of finely, regularly spaced proposal values of ρ,
where
and \(\bar g_i = (m  i + 1)^{  1}\mathop {\sum}\nolimits_{j = i}^m \hat g_a(r_j)\). Algorithmic resolution limit α is then estimated as \(\hat \rho /2\).
Calculating resolution adjusted Ripley’s Kfunction
For the algorithmic resolution limit α for a specific image analysis approach determined as described above, L_{2α}(r) − r is calculated as
where K_{2α}(r) = K(r) − K(2α). See Supplementary Note 9 for details regarding the determination of 2α for each image analysis approach from the corresponding paircorrelation results.
Analyzing experimental superresolution data
Let \({\cal D}_i\) denote the ith dataset consisting of M_{i} images \(\{ {\cal I}_1^i, \ldots ,{\cal I}_{M_i}^i\}\) for i = 1,…,N. Let \({\cal D}_1\) denote the set of acquired experimental images. The remaining datasets \({\cal D}_2, \ldots ,{\cal D}_N\) were generated by summing images from \({\cal D}_1\) as follows:
where \(m_0^\prime = m(i  1)\) + 1, m′ = m ⋅ i for m = 1,…,M_{i}. Here, M_{i} denotes the number of images in dataset \({\cal D}_i\) and is calculated as M_{i} = ⌊M_{1}/i⌋. Each of these datasets were analyzed independently using the image analysis approaches described above. The experimental dataset analyzed for Fig. 4 consisted of M_{1} = 50,000 images.
Reconstructing superresolution images
Superresolution images were reconstructed from a set of localizations by simulating Gaussian profiles (as described above in the simulation of clathrincoated pits) centered at each localization. The superresolution image was generated using a pixel size of 1/63 μm in the object space which corresponds to 1/16th the object space pixel size of the acquired images. Each Gaussian profile was simulated using σ = 17 nm for the width parameter and 100 detected photons. The value for σ corresponds to the limit of the localization accuracy calculated using the average number of photons detected from each localized fluorophore and the average background noise associated with each localization.
Software
Region of interest identification using waveletfiltering or globalthresholding followed by fitting with either Airy or Gaussian profiles was performed using custom programs developed with the MIATool software framework^{29} in Java. The ThunderSTORM^{23} and SimpleFit^{24} software packages were used with default settings for the various options within the software. The QuickPALM^{25} software was used with the Full Width at Half Maximum = 2 setting to match the width of the single molecule or clathrincoated pit being localized. Calculations for L(r) − r, paircorrelations, and L_{2α}(r) − r were performed using customdeveloped scripts in the MATLAB programming environment (The MathWorks, Inc., Natick, MA). All figures were similarly prepared using MATLAB.
Data and code availability
The data that support the findings in this study are available upon reasonable request to the corresponding authors. The software related to the analysis presented in this paper is available at https://github.com/eakcohen/algorithmicresolution and http://www.wardoberlab.com/software.
References
Inoue, S. & Spring, K. Video Microscopy: The Fundamentals (Springer, New York, 1997).
Betzig, E. et al. Imaging intracellular fluorescent proteins at nanometer resolution. Science 313, 1642–1645 (2006).
Heilemann, M. et al. Subdiffractionresolution fluorescence imaging with conventional fluorescent probes. Angew. Chem. Int. Ed. 47, 6172–6176 (2008).
Thompson, M. A., Lew, M. D. & Moerner, W. Extending microscopic resolution with singlemolecule imaging and active control. Annu. Rev. Biophys. 41, 321–342 (2012).
Ehrlich, M. et al. Endocytosis by random initiation and stabilization of clathrincoated pits. Cell 118, 591–605 (2004).
Lagache, T., Lang, G., Sauvonnet, N. & OlivoMarin, J.C. Analysis of the spatial organization of molecules with robust statistics. PLoS ONE 8, e80914 (2013).
Ram, S., Prabhat, P., Chao, J., Ward, E. S. & Ober, R. J. High accuracy 3D quantum dot tracking with multifocal plane microscopy for the study of fast intracellular dynamics in live cells. Biophys. J. 95, 6025–6043 (2008).
Saxton, M. J. & Jacobson, K. Singleparticle tracking: applications to membrane dynamics. Annu. Rev. Biophys. Biomol. Struct. 26, 373–399 (1997).
Rink, J., Ghigo, E., Kalaidzidis, Y. & Zerial, M. Rab conversion as a mechanism of progression from early to late endosomes. Cell 122, 735–749 (2005).
Sage, D. et al. Quantitative evaluation of software packages for singlemolecule localization microscopy. Nat. Methods 12, 717–724 (2015).
Cressie, N. Statistics for Spatial Data (John Wiley & Sons, Hoboken, NJ, 2015).
Ram, S., Ward, E. S. & Ober, R. J. Beyond Rayleigh’s criterion: a resolution measure with application to singlemolecule microscopy. Proc. Natl. Acad. Sci. USA 103, 4457–4462 (2006).
Ram, S., Sally Ward, E. & Ober, R. J. A stochastic analysis of distance estimation approaches in single molecule microscopy: quantifying the resolution limits of photonlimited imaging systems. Multidimens. Syst. Signal Process. 24, 503–542 (2013).
Wolter, S., Endesfelder, U., van de Linde, S., Heilemann, M. & Sauer, M. Measuring localization performance of superresolution algorithms on very active samples. Opt. Express 19, 7020–7033 (2011).
Small, A. R. Theoretical limits on errors and acquisition rates in localizing switchable fluorophores. Biophys. J. 96, L16–L18 (2009).
van de Linde, S., Wolter, S., Heilemann, M. & Sauer, M. The effect of photoswitching kinetics and labeling densities on superresolution fluorescence imaging. J. Biotechnol. 149, 260–266 (2010).
FoxRoberts, P. et al. Local dimensionality determines imaging speed in localization microscopy. Nat. Commun. 8, 13558 (2017).
Afshang, M., Saha, C. & Dhillon, H. Nearestneighbor and contact distance distributions for thomas cluster process. IEEE Wirel. Commun. Lett. 6, 130–133 (2016).
Nieuwenhuizen, R. P. et al. Measuring image resolution in optical nanoscopy. Nat. Methods 10, 557–562 (2013).
RubinDelanchy, P. et al. Bayesian cluster identification in singlemolecule localization microscopy data. Nat. Methods 12, 1072 (2015).
Ram, S., Sally Ward, E. & Ober, R. J. A stochastic analysis of performance limits for optical microscopes. Multidimens. Syst. Signal Process. 17, 27–57 (2006).
OlivoMarin, J.C. Extraction of spots in biological images using multiscale products. Pattern Recognit. 35, 1989–1996 (2002).
Ovesný, M., Křížek, P., Borkovec, J., Švindrych, Z. & Hagen, G. M. ThunderSTORM: a comprehensive ImageJ plugin for PALM and STORM data analysis and superresolution imaging. Bioinformatics 30, 2389–2390 (2014).
Herbert, A. GDSC single molecule light microscopy (SMLM) ImageJ plugins. http://www.sussex.ac.uk/gdsc/intranet/pdfs/SMLM.pdf. 2015.
Henriques, R. et al. QuickPALM: 3D realtime photoactivation nanoscopy image processing in Image. J. Nat. Methods 7, 339–340 (2010).
Parthasarathy, R. Rapid, accurate particle tracking by calculation of radial symmetry centers. Nat. Methods 9, 724–726 (2012).
Ripley, B. D. Statistical Inference for Spatial Processes (Cambridge University Press, Cambridge, MA, 1991).
Illian, J., Penttinen, A., Stoyan, H. & Stoyan, D. Statistical Analysis and Modelling of Spatial Point Patterns, Vol. 70 (John Wiley & Sons, Hoboken, NJ, 2008).
Chao, J., Ward, E. S. & Ober, R. J. A software framework for the analysis of complex microscopy image data. IEEE Trans. Inf. Technol. Biomed. 14, 1075–1087 (2010).
Acknowledgements
The authors would like to thank Professor Niall Adams, Department of Mathematics, Imperial College London for valuable discussions and input on implementing change point methods to estimate algorithmic resolution limits. This work was supported in part by the National Institutes of Health (R01GM085575).
Author information
Authors and Affiliations
Contributions
E.A.K.C. and R.J.O. conceived the methodology presented here, developed the mathematical theory underlying the methodology, and wrote the manuscript. A.V.A., E.A.K.C., and S.R. performed the calculations and prepared the figures for the results.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Journal peer review information: Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Cohen, E.A.K., Abraham, A.V., Ramakrishnan, S. et al. Resolution limit of image analysis algorithms. Nat Commun 10, 793 (2019). https://doi.org/10.1038/s4146701908689x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s4146701908689x
This article is cited by

Subdiffraction error mapping for localisation microscopy images
Nature Communications (2021)

Quantifying accuracy and heterogeneity in singlemolecule superresolution microscopy
Nature Communications (2020)

Rethinking resolution estimation in fluorescence microscopy: from theoretical resolution criteria to superresolution microscopy
Science China Life Sciences (2020)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.