Abstract
Onchip spectrometers have the potential to offer dramatic size, weight, and power advantages over conventional benchtop instruments for many applications such as spectroscopic sensing, optical network performance monitoring, hyperspectral imaging, and radiofrequency spectrum analysis. Existing onchip spectrometer designs, however, are limited in spectral channel count and signaltonoise ratio. Here we demonstrate a transformative onchip digital Fourier transform spectrometer that acquires highresolution spectra via timedomain modulation of a reconfigurable MachZehnder interferometer. The device, fabricated and packaged using industrystandard silicon photonics technology, claims the multiplex advantage to dramatically boost the signaltonoise ratio and unprecedented scalability capable of addressing exponentially increasing numbers of spectral channels. We further explore and implement machine learning regularization techniques to spectrum reconstruction. Using an ‘elasticD_{1}’ regularized regression method that we develop, we achieved significant noise suppression for both broad (>600 GHz) and narrow (<25 GHz) spectral features, as well as spectral resolution enhancement beyond the classical Rayleigh criterion.
Introduction
Optical spectrometers are extensively applied to sensing, materials analysis, and optical network monitoring. Conventional spectrometers are bulky instruments often involving mechanical moving parts, which severely compromises their deployment versatility and increases cost. Photonic integration offers a solution to miniaturize spectrometers into a chipscale platform, albeit often at the cost of performance and scalability. To date, the majority of onchip spectrometers have relied on dispersive elements such as gratings^{1,2,3,4,5,6,7}, holograms^{8,9}, and microresonators^{10,11,12}. When applied to highresolution spectrum acquisition, these devices suffer serious signaltonoise ratio (SNR) penalties as a result of spreading input light over many spectral channels. Furthermore, the device footprint and systemlevel complexity increases linearly with the number of spectral channels N, since the spectral resolution scales inversely with the optical path length (OPL) and each channel requires a dedicated photodetector. The SNR degradation and linear scaling behavior preclude highperformance onchip spectrometers with channel counts rivaling their benchtop counterparts, which typically have hundreds to thousands of spectral channels. We note that these constraints also apply to spectrometers based on the wavelength multiplexing principle, where each receiver captures an ensemble of monochromatic light rather than one single wavelength^{13,14,15,16,17,18,19} (for multiplescatteringbased spectrometers, the device dimension scales with spectral resolution quadratically).
Unlike dispersive spectrometers, Fourier transform infrared (FTIR) spectrometers overcome the tradeoff between SNR and spectral resolution benefiting from the multiplex advantage, also known as Fellgett’s advantage^{20}. Traditional benchtop FTIR spectrometers use moving mirrors to generate a tunable OPL, a design not readily amenable to planar photonic integration. Onchip FTIR spectrometers instead rely on thermooptic or electrooptic modulation to change the OPL in a waveguide^{21,22,23,24}. The miniscule refractive index modifications produced by these effects, however, result in a large device footprint and constrain the practically attainable spectral resolution to tens of cm^{−1} in wave number, far inferior compared to their benchtop counterparts. Furthermore, prior work has demonstrated Fouriertransform spectrometers using arrays of discrete Mach–Zehnder interferometers (MZIs)^{15,18,25,26}, although these approaches are not practical for large spectral channel counts (due to excessive chip footprints). The compressive sensing methods proposed and demonstrated for reconstructing optical spectra using the limited measurements from these MZI arrays are also only practical for sparse spectra such as laser lines (as shown in later sections). Prior theoretical work has suggested optical switches can be used to physically alter interferometer arm lengths^{27}, but these embodiments would all suffer in practice from poor scaling laws, as the number of spectral channels is equal to the number of switches and photodetectors.
We propose and experimentally demonstrate a novel digital Fourier transform (dFT) spectrometer architecture that resolves the performance and scalability challenges of these prior approaches. Our device consists of a MZI with optical switches on each arm that direct light to waveguides of unique path lengths^{28}. This approach claims three key advantages over stateoftheart techniques. First, both the resolution and spectral channel count scale exponentially with j, the number of optical switches. The unique exponential scaling laws inherent to our dFT architecture enable highresolution spectra to be acquired with minimal chip space and control electronics. Second, direct modification of the waveguide path offers over 2 orders of magnitude larger OPL modulation per unit waveguide length compared to thermooptic or electroopticbased index modulation (see Supplementary Note 3 for further details), enabling superior spectral resolution within a compact device. Third, the device benefits from the multiplex advantage (which ensures a higher SNR over dispersive type spectrometers) and requires only a singleelement photodetector rather than a linear detector array, which reduces cost and system complexity.
Results
dFT architecture and scaling laws
The dFT spectrometer comprises of a reconfigurable MZI, which is schematically illustrated in Fig. 1a. Each arm of this interferometer consists of j/2 cascaded sets of optical switches (where j is an even integer) connected by waveguides of varying lengths. An OPL difference of zero between the two arms is achieved when light is directed to the set of reference paths (marked with black color) in both MZI arms. Lengths of the waveguide paths in red differ from the reference paths by powers of two times ΔL. In this device architecture, each permutation of the switches corresponds to a unique OPL difference between the arms that covers 0 to (2^{j} − 1)·n_{g}·ΔL with a step size of n_{g}·ΔL, where n_{g} represents the waveguide group index. In traditional FTIR spectrometers the OPL difference between the two arms is continuously tuned, but in our dFT spectrometer the state of each “digitized” binary optical switch corresponds to a unique permutation of the spectrometer and a unique OPL difference. The number of spectral channels, defined by the distinctive optical states the device furnishes, is:
and the spectral resolution is given following the Rayleigh criterion^{29,30,31}:
where λ denotes the center wavelength.
Experimental device
We experimentally validated the dFT spectrometer concept by demonstrating a 64channel device (j = 6) operating at the telecommunication Cband. The device was fabricated leveraging a commercial silicon photonics foundry process, where the optical switches employ a custom compact thermooptic phase shifter design (89.5 μm long, with 33 mW/π phase shifting efficiency and 30.8 μs 10–90% rise time, both evaluated through our own experimental measurements)^{32}. The insertion loss of the entire spectrometer was found to be 9.1 ± 1.7 dB, with a loss of 1.7 ± 0.4 dB for each switching stage (averaged across the full 20 nm band considered in this text, see Supplementary Note 2). Figure 1b presents a micrograph of the spectrometer after frontendofline silicon fabrication. The chip was subsequently packaged with bonded fiber arrays and electrical connections. Details of the fabrication and packaging processes are elaborated in the Methods section. The spectrometer also integrates an onchip germanium photodetector and a standard FC/PC fiber connector interface, making it a standalone “plugandplay” device for optical spectrum analysis (Fig. 1c). The spectrometer dissipates 99 mW of power during operation, regardless of the switch state.
The spectrometer was characterized using a setup depicted in Fig. 2a. Highresolution transmittance spectra of the device were first recorded by wavelength sweeping a tunable laser between 1550 and 1570 nm, for all 64 permutations of the switch on/off combinations. The 64 spectra (which show an average extinction ratio of 21 ± 3 dB) are plotted in Fig. 2c, each associated with a unique OPL difference between the MZI arms. The ensemble of spectra forms an m × n calibration matrix A. Each row of A represents a transmittance spectrum and contains n = 801 elements, the number of wavelength points in the scan. Each column corresponds to a discretely sampled interferogram of the narrowband laser and contains m = 64 elements. The intensity measured by the detector for an arbitrary input polychromatic signal (represented by a column vector x with 801 elements) is:
where the interferogram y is a column vector with 64 elements, each gives the detector output at a particular switch permutation. The vector y was measured by recording the detector output at all 64 permutation states. Since we measured y with size 64 to infer x with size 801, the system is underconstrained and therefore regularization techniques are required to specify a unique solution.
Spectrum reconstruction
To determine the correct solution vector, we first explored a number of standard regularized regression and compressivesensing techniques such as basis pursuit denoising (BPDN), least absolute shrinkage and selection operator (LASSO), and elasticnet—the corresponding metrics they optimize are listed in Table 1. For each of these regularized regression methods, a weight (hyperparameter) is applied to the L_{1}norm (and for elasticnet a separate weight for the L_{2}norm) of the spectrum. To determine the appropriate value(s) of the hyperparameter(s), we use a standard holdout crossvalidation technique^{33}, through which we take two consecutive measurements of the interferogram (y_{1} and y_{2}) and choose hyperparameters that maximize the coefficient of determination R^{2}(A_{2}x, y_{2}) (see Supplementary Note 1), where A_{1} and A_{2} are two separate measurements of the basis (performed once as a calibration step), and x is the computed spectrum from y_{1} and A_{1}. We note that our basis measurements A_{1} and A_{2} do not change significantly over time: in fact, for all results reported in this work the calibration matrices A_{1} and A_{2} are measured more than 2 weeks prior to the actual interferogram measurements y_{1} and y_{2}. The validated device stability is critical to practical applications, as it ensures that the calibration step only need to be performed once for each spectrometer module. We found that these methods (BPDN, LASSO, elasticnet) tend to perform reasonably well for sparse spectra such as a few input laser lines. However, BPDN and LASSO (which only weight the L_{1}norm) fail to faithfully reproduce broad spectral features where the input spectrum contains few (if any) zeros, as illustrated by the low R^{2} values in Table 2 as well as examples of the reconstructed spectra presented in Supplementary Fig. 1 and Supplementary Fig. 2. Other techniques we considered, such as Ridge Regression (which only weights the L_{2}norm), pseudoinverse (Penrose–Moore), and radialbasis function (RBF) networks, exhibit significant reconstruction errors on both broad and narrow spectral features. The latter method (RBF Network) is the analytical solution to a regression model that bounds all derivatives of the solution vector^{34}.
To properly account for both the sparsity and “smoothness” of the spectra, we implemented a regularized regression model that accounts for both L_{1} and L_{2}norms as well as the firstderivative of the spectrum. This method, that we call “elasticD_{1}” from here on, is a nonnegative elasticnet method with an additional smoothing prior. It solves the regularization problem:
where α_{1}, α_{2}, and α_{3} are hyperparameters that weight the corresponding L_{1} and L_{2}norms on x, and the L_{2}norm on the first derivative specified by the matrix D_{1}. The combination of bounds on the L_{1}norm (that induces sparsity on the spectrum), L_{2}norm (that bounds magnitude of the spectrum), and first derivative of the spectrum (that sets the desired smoothing) produce significantly better reconstructions (compared to other known methods) on both broad and narrow spectral features without requiring knowledge of the true input spectrum. Since Eq. (4) is a nonnegative quadratic program, it is readily solvable with standard convex optimization tools^{35}. Details of the elasticD_{1} algorithm, its implementation, and performance benchmarking compared to several existing reconstruction techniques are presented in Table 2 and Supplementary Note 1. The comparison in Table 2 suggests that the elasticD_{1} algorithm significantly outperforms other techniques for both sparse and broadband input signals.
To demonstrate the versatility of the elasticD_{1} method, we applied the technique to experimentally measured interferograms for two types of polychromatic inputs, sparse signals consisting of discrete laser lines and broadband signals with complex spectral features (see Methods). Figure 3 plots the reconstructed spectra comprising two laser lines with slightly different amplitudes and varying wavelength spacing. The elasticD_{1} technique precisely reproduces the laser wavelengths with ±0.025 nm accuracy, only limited by the finite wavelength step size of the calibration matrix (0.025 nm). The spectral resolution of our device, determined here by the minimum resolvable wavelength detuning between two laser lines, significantly outperforms the Rayleigh criterion of 0.4 nm with an experimentally determined value of 0.2 nm. The enhanced reconstruction quality is a result of the elasticD_{1} method’s automatic consideration of the tradeoffs between spectral sparsity, magnitude, and smoothness (see Supplementary Note 1). Figure 4 compares the spectra of three unique broadband inputs recorded using a benchtop optical spectrum analyzer as a reference and reconstructed spectra using the same 64channel dFT device and elasticD_{1} algorithm. The high reconstruction quality on arbitrary input spectra with characteristic spectral features ranging from several nanometers to well below the Rayleigh limit validates dFT spectroscopy as a generic, powerful tool for quantitative spectroscopy.
Discussion
Optical spectrum analysis using a MZI with physical path differences enables highresolution spectroscopy with limited interferogram measurements. By utilizing a reconfigurable interferometer, we demonstrated a working dFT spectrometer device that both recovers the multiplex advantage (as seen by the lowinsertion loss per channel in Supplementary Table 1 and Supplementary Note 5), and is capable of highresolution spectrum acquisition with a compact form factor. For input spectra with slowly varying (broad) spectral features, our elasticD_{1} spectral reconstruction provides a superior reconstruction accuracy than other regularization or compressive sensing techniques at the expense of increased computation time to determine suitable hyperparameters. A thorough comparison of the elasticD_{1} technique compared to other common reconstruction methods is shown in Supplementary Table 1 and graphically depicted in Supplementary Fig. 1 and Supplementary Fig. 2. We note that noticeable errors tend to occur at the edges of broad spectra after reconstruction since the signal (interferogram) is bandlimited in the spatial domain. However, these errors are expected to become negligible as the number of unique OPL differences (determined by the number of switching stages via Eq. (1)) and spectral channels increases. As channel count increases, the system also becomes less underconstrained and reconstruction errors are expected to decrease significantly. Increasing channel count is simple and inexpensive in terms of chipspace—a dFT spectrometer with two additional (5 total) switching stages (i.e., a total of j = 10 switches) would access 1024 unique spectral channels while occupying only 40% more chip area than the 64channel device demonstrated here. We believe this device architecture paves the way toward future onchip spectrometers with significantly larger spectral channel counts, higher resolution, and dramatically increased optical throughput with respect to existing onchip spectrometers.
In conclusion, this work pioneers dFT spectroscopy as a highperformance, scalable solution for onchip optical spectrum analysis. Its unique exponential scalability in performance, superior SNR leveraging the multiplex advantage, as well as compact and remarkably simplified device design are among the key advantages of the technology. Moreover, its proven compatibility with industrystandard foundry processes enables scalable manufacturing and drastic cost reduction. We further developed an elasticD_{1} machine learning regularization technique to achieve significant noise suppression and resolution enhancement. The powerful combination of dFT spectroscopy and machine learning techniques will empower future applications of spectroscopy such as chemical and biological sensorsonachip, spaceborne spectroscopy, optical network monitoring, and radiofrequency spectrum analysis.
Methods
Device fabrication
Device layout and mask generation was done using Luceda’s IPKISS design framework and tools. The dFT spectrometer chips were fabricated on the imecePIXfab active silicon photonics platform (ISIPP25G) multiproject wafer service, using 193 nm deepUV lithography. Standard passive and active components (excluding the custom compact thermooptic phase modulator) from the imecePIXfab process design kit (PDK) library were used to construct the dFT spectrometer (schematics shown in Supplementary Fig. 3). The devices were subsequently packaged at Tyndall National Institute with fiber grating coupler arrays and electrical connections on a thermoelectric cooler for temperature control.
Device characterization
Packaged devices were characterized at MIT with a swept singlefrequency external cavity laser to determine the wavelength response of the device for each switch state, using the integrated germanium detector for signal readout and temperature stabilization at 25.00 ± 0.01 °C (for the device’s temperature dependence, see Supplementary Note 4 and Supplementary Fig. 4). The thermooptic switches were initially calibrated by tuning the heater powers until the frequency response of the top arm or bottom arm was flat, as measured from one of two “tap” ports, indicated in Fig. 1. Heater preamplifiers, programmable digital control logic, and photodetector transimpedance amplifiers with variable gain are all implemented with custom electronics and automation software. Each interferogram measurement took 2.7 seconds to acquire (limited primarily by the USB latency between our computer and DAQ board). The elasticD_{1} technique was implemented in Python 2.7 with free software for convex optimization (cvxopt^{35}). The Ridge Regression, LASSO, RBF network, and elasticnet methods were implemented using scikitlearn, a free library for machine learning in Python^{36}. The basispursuit denoising method was implemented using SPORCO, a free Python library^{37}. Testing on two inputlasers with different wavelength spacing was performed by combining two separate tunable continuouswave external cavity lasers through a 2 × 2 fiber coupler with one output port to an optical spectrum analyzer and the second to the dFT spectrometer. To generate the broadband input signal shown in Fig. 4 source 1 and source 2, we couple the amplified spontaneous emission from an erbiumdoped fiber amplifier (EDFA) to onchip imbalanced MZI structures with arm length differences of 100 and 200 μm, respectively. The spectrum in Fig. 4 source 3 is obtained by passing light through both MZI structures connected in series. The complex spectral features are attributed to both interference in the imbalanced MZI as well as Fabry–Perot fringes due to multiple reflections at connectors and couplers. The reference spectra were recorded using a Yokogawa AQ6375B optical spectrum analyzer.
Code availability
Custom code written in Python to perform spectral reconstruction via the elasticD_{1} regularized regression technique is available upon reasonable request.
Data availability
Raw data from the basis measurements and all interferogram measurements are available from the corresponding authors upon reasonable request.
References
Subramanian, A. Z. et al. Silicon and silicon nitride photonic circuits for spectroscopic sensing onachip. Photonics Res. 3, B47–B59 (2015).
Cheben, P. et al. A highresolution silicononinsulator arrayed waveguide grating microspectrometer with submicrometer aperture waveguides. Opt. Express 15, 2299–2306 (2007).
Kyotoku, B., Chen, L. & Lipson, M. Subnm resolution cavity enhanced microspectrometer. Opt. Express 18, 102–107 (2010).
Ma, X., Li, M. & He, J. J. CMOScompatible integrated spectrometer based on echelle diffraction grating and MSM photodetector array. IEEE Photonics J. 5, 6600807 (2013).
Muneeb, M. et al. Demonstration of silicononinsulator midinfrared spectrometers operating at 3.8 μm. Opt. Express 21, 11659–11669 (2013).
Ryckeboer, E. et al. Silicononinsulator spectrometers with integrated GaInAsSb photodiodes for wideband spectroscopy from 1510 to 2300 nm. Opt. Express 21, 6101–6108 (2013).
Bogaerts, W. et al. Silicononinsulator spectral filters fabricated with CMOS technology. IEEE J. Sel. Top. Quantum Electron. 16, 33–44 (2010).
Babin, S. et al. Digital optical spectrometeronchip. Appl. Phys. Lett. 95, 041105 (2009).
Calafiore, G. et al. Holographic planar lightwave circuit for onchip spectroscopy. Light Sci. Appl. 3, e203 (2015).
Xia, Z. et al. High resolution onchip spectroscopy based on miniaturized microdonut resonators. Opt. Express 19, 12356–12364 (2011).
Gan, X., Pervez, N., Kymissis, I., Hatami, F. & Englund, D. A highresolution spectrometer based on a compact planar two dimensional photonic crystal cavity array. Appl. Phys. Lett. 100, 231104 (2012).
Liapis, A. C., Gao, B., Siddiqui, M. R., Shi, Z. & Boyd, R. W. Onchip spectroscopy with thermally tuned highQ photonic crystal cavities. Appl. Phys. Lett. 108, 021105 (2016).
Le Coarer, E. et al. Wavelengthscale stationarywave integrated Fouriertransform spectrometry. Nat. Photonics 1, 473–478 (2007).
Redding, B., Liew, S. F., Sarma, R. & Cao, H. Compact spectrometer based on a disordered photonic chip. Nat. Photonics 7, 746–751 (2013).
Velasco, A. V. et al. Highresolution Fouriertransform spectrometer chip with microphotonic silicon spiral waveguides. Opt. Lett. 38, 706–708 (2013).
Bock, P. J. et al. Subwavelength grating periodic structures in silicononinsulator: a new type of microphotonic waveguide. Opt. Express 18, 20251–20262 (2010).
Redding, B., Fatt Liew, S., Bromberg, Y., Sarma, R. & Cao, H. Evanescently coupled multimode spiral spectrometer. Optica 3, 956–962 (2016).
Nedeljkovic, M. et al. Midinfrared silicononinsulator Fouriertransform spectrometer chip. IEEE Photonics Technol. Lett. 28, 528–531 (2016).
Piels, M. & Zibar, D. Compact silicon multimode waveguide spectrometer with enhanced bandwidth. Sci. Rep. 7, 1–7 (2017).
Harwit, M. Hadamard Transform Optics (Elsevier, Burlington, 2012).
Zheng, S., Cai, H., Gu, Y., Chin, L. K. & Liu, A. Q. Highresolution onchip spectrometer with a tunable microring resonator filter. Conf. Lasers ElectroOpt. 2, AM1J.2 (2016).
Chao, T.H. & Casasent, D. P. Optical pattern recognition XIX. in Proceedings of SPIE  The International Society for Optical Engineering 69770P (2008).
Li, J., Lu, D. & Qi, Z. Miniature Fourier transform spectrometer based on wavelength dependence of halfwave voltage of a LiNbO_{3} waveguide interferometer. Opt. Lett. 39, 3923–3926 (2014).
Souza, M. C. M. M., Grieco, A., Frateschi, N. C. & Fainman, Y. Fourier transform spectrometer on silicon with thermooptic nonlinearity and dispersion correction. Nat. Commun. 9, 1–8 (2018).
HerreroBermello, A. et al. Temperature dependence mitigation in stationary Fouriertransform onchip spectrometers. Opt. Lett. 42, 2239–2242 (2017).
Podmore, H. et al. Demonstration of a compressivesensing Fouriertransform onchip spectrometer. Opt. Lett. 42, 1440–1443 (2017).
Akca, B. I. Design of a compact and ultrahighresolution Fouriertransform spectrometer. Opt. Express 25, 1487–1494 (2017).
Kita, D. M. et al. Highresolution onchip digital Fourier transform spectroscopy. in CLEO: Conference on Lasers and ElectroOptics 1–2 (2018). https://doi.org/10.1364/CLEO_SI.2018.SF1A.1
Griffiths, P. R., & De Haseth, J. A. Fourier Transform Infrared Spectrometery, 2nd Edition. (John Wiley & Sons, Inc., Hoboken, New Jersey, 2007)
Kita, D. et al. Onchip infrared spectroscopic sensing: redefining the benefits of scaling. IEEE J. Sel. Top. Quantum Electron. 23, 5900110 (2017).
Lin, H. et al. Midinfrared integrated photonics on silicon: a perspective. Nanophotonics 7, 1–28 (2017).
Harris, N. C. et al. Efficient, compact and low loss thermooptic phase shifter in silicon. Opt. Express 22, 10487–10493 (2014).
ShalevShwartz, S. & BenDavid, S. Understanding Machine Learning: From Theory to Algorithms (Cambridge University Press, 2014).
AbuMostafa, Y. S. Learning From Data. Caltech Lecture Notes (2012). Available at http://work.caltech.edu/slides/slides16.pdf.
Andersen, M., Dahl, J. & Vandenberghe, L. CVXOPT: Python Software for Convex Optimization http://cvxopt.org/ (2016).
Pedregosa, F. et al. Scikitlearn: machine learning in Python. J. Mach. Learn. Res. 12, 2825–2830 (2011).
Wohlberg, B. SPORCO: a Python package for standard and convolutional sparse representations. in Proc. 15th Python Sci. Conf. (SCIPY 2017) 1–8 (2017).
Acknowledgements
The authors thank Lionel C. Kimerling, Anu Agarwal, and Rajeev Ram for providing access to device measurement facilities. Funding support is provided by the National Science Foundation under award number 1709212, MIT SENSE.nano Seed Grant, and the Department of Energy under Grant DENA0002509. D.M.K. acknowledges the SaksKavanagh Fellowship for Technology Commercialization provided by the SaksKavanaugh Foundation for financial support.
Author information
Authors and Affiliations
Contributions
D.M.K. designed and characterized the spectrometer device. B.M. and D.M.K. developed the machine learning algorithms for spectrum reconstruction. D.F., D.B., and D.M.K. designed and assembled the electronics for device testing. J.M. and H.L. assisted in device characterization. J.H. conceived the spectrometer concept and supervised the research. T.G. and D.M.K. contributed to the concept formulation. All authors contributed to technical discussions and writing the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kita, D.M., Miranda, B., Favela, D. et al. Highperformance and scalable onchip digital Fourier transform spectroscopy. Nat Commun 9, 4405 (2018). https://doi.org/10.1038/s41467018067732
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467018067732
Further reading

Electrically tunable twodimensional heterojunctions for miniaturized nearinfrared spectrometers
Nature Communications (2022)

Advances in costeffective integrated spectrometers
Light: Science & Applications (2022)

Thinfilm lithiumniobate electrooptic platform for spectrally tailored dualcomb spectroscopy
Communications Physics (2022)

A wavelengthscale black phosphorus spectrometer
Nature Photonics (2021)

Reconfigurable alldielectric metalens with diffractionlimited performance
Nature Communications (2021)
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.